Age | Commit message (Collapse) | Author | Files | Lines |
|
While reading sysctl_tcp_comp_sack_slack_ns, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: a70437cc09a1 ("tcp: add hrtimer slack to sack compression")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
While reading sysctl_tcp_comp_sack_delay_ns, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 6d82aa242092 ("tcp: add tcp_comp_sack_delay_ns sysctl")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
While reading these sysctl variables, they can be changed concurrently.
Thus, we need to add READ_ONCE() to their readers.
- .sysctl_rmem
- .sysctl_rwmem
- .sysctl_rmem_offset
- .sysctl_wmem_offset
- sysctl_tcp_rmem[1, 2]
- sysctl_tcp_wmem[1, 2]
- sysctl_decnet_rmem[1]
- sysctl_decnet_wmem[1]
- sysctl_tipc_rmem[1]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
While reading sysctl_tcp_pacing_(ss|ca)_ratio, they can be changed
concurrently. Thus, we need to add READ_ONCE() to their readers.
Fixes: 43e122b014c9 ("tcp: refine pacing rate determination")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
mld_{query | report}_work() processes queued events.
If there are too many events in the queue, it re-queue a work.
And then, it returns without in6_dev_put().
But if queuing is failed, it should call in6_dev_put(), but it doesn't.
So, a reference count leak would occur.
THREAD0 THREAD1
mld_report_work()
spin_lock_bh()
if (!mod_delayed_work())
in6_dev_hold();
spin_unlock_bh()
spin_lock_bh()
schedule_delayed_work()
spin_unlock_bh()
Script to reproduce(by Hangbin Liu):
ip netns add ns1
ip netns add ns2
ip netns exec ns1 sysctl -w net.ipv6.conf.all.force_mld_version=1
ip netns exec ns2 sysctl -w net.ipv6.conf.all.force_mld_version=1
ip -n ns1 link add veth0 type veth peer name veth0 netns ns2
ip -n ns1 link set veth0 up
ip -n ns2 link set veth0 up
for i in `seq 50`; do
for j in `seq 100`; do
ip -n ns1 addr add 2021:${i}::${j}/64 dev veth0
ip -n ns2 addr add 2022:${i}::${j}/64 dev veth0
done
done
modprobe -r veth
ip -a netns del
splat looks like:
unregister_netdevice: waiting for veth0 to become free. Usage count = 2
leaked reference.
ipv6_add_dev+0x324/0xec0
addrconf_notify+0x481/0xd10
raw_notifier_call_chain+0xe3/0x120
call_netdevice_notifiers+0x106/0x160
register_netdevice+0x114c/0x16b0
veth_newlink+0x48b/0xa50 [veth]
rtnl_newlink+0x11a2/0x1a40
rtnetlink_rcv_msg+0x63f/0xc00
netlink_rcv_skb+0x1df/0x3e0
netlink_unicast+0x5de/0x850
netlink_sendmsg+0x6c9/0xa90
____sys_sendmsg+0x76a/0x780
__sys_sendmsg+0x27c/0x340
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Tested-by: Hangbin Liu <[email protected]>
Fixes: f185de28d9ae ("mld: add new workqueues for process mld events")
Signed-off-by: Taehee Yoo <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
macsec_add_txsa()
init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa->
key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error
occurs after init_rx_sa() is called in macsec_add_rxsa(), the function
released rx_sa with kfree() without releasing rx_sa->stats and rx_sa->
key.tfm, which will lead to a resource leak.
We should call macsec_rxsa_put() instead of kfree() to decrease the ref
count of rx_sa and release the relevant resource if the refcount is 0.
The same bug exists in macsec_add_txsa() for tx_sa as well. This patch
fixes the above two bugs.
Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Jianglei Nie <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Sabrina Dubroca says:
====================
macsec: fix config issues
The patch adding netlink support for XPN (commit 48ef50fa866a
("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)"))
introduced several issues, including a kernel panic reported at [1].
Reproducing those bugs with upstream iproute is limited, since iproute
doesn't currently support XPN. I'm also working on this.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=208315
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a
u32, sometimes forced into a u64 without checking the actual length of
the attribute. Instead, we can use nla_get_u64 everywhere, which will
read up to 64 bits into a u64, capped by the actual length of the
attribute coming from userspace.
This fixes several issues:
- the check in validate_add_rxsa doesn't work with 32-bit attributes
- the checks in validate_add_txsa and validate_upd_sa incorrectly
reject X << 32 (with X != 0)
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value
of the replay window is 2^30-1, to help with recovery of the upper
bits of the PN.
To avoid leaving the existing macsec device in an inconsistent state
if this test fails during changelink, reuse the cleanup mechanism
introduced for HW offload. This wasn't needed until now because
macsec_changelink_common could not fail during changelink, as
modifying the cipher suite was not allowed.
Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so
that secy->xpn is set.
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT.
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit 48ef50fa866a added a test on tb_sa[MACSEC_SA_ATTR_PN], but
nothing guarantees that it's not NULL at this point. The same code was
added to macsec_add_txsa, but there it's not a problem because
validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is
present.
Note: it's not possible to reproduce with iproute, because iproute
doesn't allow creating an SA without specifying the PN.
Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315
Reported-by: Frantisek Sumsal <[email protected]>
Signed-off-by: Sabrina Dubroca <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Replace 'the the' with 'the' in the comment.
Signed-off-by: Slark Xiao <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Replace 'the the' with 'the' in the comment.
Signed-off-by: Slark Xiao <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Replace 'the the' with 'the' in the comment.
Signed-off-by: Slark Xiao <[email protected]>
Acked-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This adds a quirk for the Crucial P2.
Signed-off-by: Tobias Gruetzmacher <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
Merge v5.19-rc7 into fixes to bring in:
d11219ad53dc ("amdgpu: disable powerpc support for the newer display engine")
|
|
Since commit 1033990ac5b2 ("sctp: implement memory accounting on tx path"),
SCTP has supported memory accounting on tx path where 'sctp_wmem' is used
by sk_wmem_schedule(). So we should fix the description for this option in
ip-sysctl.rst accordingly.
v1->v2:
- Improve the description as Marcelo suggested.
Fixes: 1033990ac5b2 ("sctp: implement memory accounting on tx path")
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
tls_device_down takes a reference on all contexts it's going to move to
the degraded state (software fallback). If sk_destruct runs afterwards,
it can reduce the reference counter back to 1 and return early without
destroying the context. Then tls_device_down will release the reference
it took and call tls_device_free_ctx. However, the context will still
stay in tls_device_down_list forever. The list will contain an item,
memory for which is released, making a memory corruption possible.
Fix the above bug by properly removing the context from all lists before
any call to tls_device_free_ctx.
Fixes: 3740651bf7e2 ("tls: Fix context leak on tls_device_down")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|
|
This code requires x509_load_certificate_list() to be built-in.
Fixes: 60050ffe3d77 ("certs: Move load_certificate_list() to be with the asymmetric keys code")
Reported-by: kernel test robot <[email protected]>
Reported-by: Steven Rostedt <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Adam Borowski <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Reorganize the perf LBR init code so that a TSX quirk is applied
early enough in order for the LBR MSR access to not #GP
* tag 'perf_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/lbr: Fix unchecked MSR access error on HSW
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
"A single fix to correct a wrong BUG_ON() condition for deboosted
tasks"
* tag 'sched_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix BUG_ON condition for deboosted tasks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A couple more retbleed fallout fixes.
It looks like their urgency is decreasing so it seems like we've
managed to catch whatever snafus the limited -rc testing has exposed.
Maybe we're getting ready... :)
- Make retbleed mitigations 64-bit only (32-bit will need a bit more
work if even needed, at all).
- Prevent return thunks patching of the LKDTM modules as it is not
needed there
- Avoid writing the SPEC_CTRL MSR on every kernel entry on eIBRS
parts
- Enhance error output of apply_returns() when it fails to patch a
return thunk
- A sparse fix to the sev-guest module
- Protect EFI fw calls by issuing an IBPB on AMD"
* tag 'x86_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Make all RETbleed mitigations 64-bit only
lkdtm: Disable return thunks in rodata.c
x86/bugs: Warn when "ibrs" mitigation is selected on Enhanced IBRS parts
x86/alternative: Report missing return thunk details
virt: sev-guest: Pass the appropriate argument type to iounmap()
x86/amd: Use IBPB for firmware calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix to set the correct IO mapping for a clk gate in the
lan966x driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: lan966x: Fix the lan966x clock gate register address
|
|
Pull kvm fixes from Paolo Bonzini:
- Check for invalid flags to KVM_CAP_X86_USER_SPACE_MSR
- Fix use of sched_setaffinity in selftests
- Sync kernel headers to tools
- Fix KVM_STATS_UNIT_MAX
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Protect the unused bits in MSR exiting flags
tools headers UAPI: Sync linux/kvm.h with the kernel sources
KVM: selftests: Fix target thread to be migrated in rseq_test
KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats
|
|
The mitigations for RETBleed are currently ineffective on x86_32 since
entry_32.S does not use the required macros. However, for an x86_32
target, the kconfig symbols for them are still enabled by default and
/sys/devices/system/cpu/vulnerabilities/retbleed will wrongly report
that mitigations are in place.
Make all of these symbols depend on X86_64, and only enable RETHUNK by
default on X86_64.
Fixes: f43b9876e857 ("x86/retbleed: Add fine grained Kconfig knobs")
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few more small driver specific fixes"
* tag 'spi-fix-v5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-rspi: Fix PIO fallback on RZ platforms
spi: spi-cadence: Fix SPI NO Slave Select macro definition
spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers
|
|
This reverts commit 4a41f453bedfd5e9cd040bad509d9da49feb3e2c.
This to-be-reverted commit was meant to apply a stricter rule for the
stack to enter pingpong mode. However, the condition used to check for
interactive session "before(tp->lsndtime, icsk->icsk_ack.lrcvtime)" is
jiffy based and might be too coarse, which delays the stack entering
pingpong mode.
We revert this patch so that we no longer use the above condition to
determine interactive session, and also reduce pingpong threshold to 1.
Fixes: 4a41f453bedf ("tcp: change pingpong threshold to 3")
Reported-by: LemmyHuang <[email protected]>
Suggested-by: Neal Cardwell <[email protected]>
Signed-off-by: Wei Wang <[email protected]>
Acked-by: Neal Cardwell <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Two kexec-related build fixes
- A DTS update to make the GPIO nodes match the upcoming dtschema
- A fix that passes -mno-relax directly to the assembler when building
modules, to work around compilers that fail to do so
* tag 'riscv-for-linus-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: add as-options for modules with assembly compontents
riscv: dts: align gpio-key node names with dtschema
RISC-V: kexec: Fix build error without CONFIG_KEXEC
RISCV: kexec: Fix build error without CONFIG_MODULES
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix yet another piece of ACPI CPPC changes fallout on AMD platforms
(Mario Limonciello)"
* tag 'acpi-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Don't require flexible address space if X86_FEATURE_CPPC is supported
|
|
Pull io_uring fixes from Jens Axboe:
"Fix for a bad kfree() introduced in this cycle, and a quick fix for
disabling buffer recycling for IORING_OP_READV.
The latter will get reworked for 5.20, but it gets the job done for
5.19"
* tag 'io_uring-5.19-2022-07-21' of git://git.kernel.dk/linux-block:
io_uring: do not recycle buffer in READV
io_uring: fix free of unallocated buffer list
|
|
Pull block fix from Jens Axboe:
"Just a single fix for missing error propagation for an allocation
failure in raid5"
* tag 'block-5.19-2022-07-21' of git://git.kernel.dk/linux-block:
md/raid5: missing error code in setup_conf()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two driver bugfixes and a typo fix"
* tag 'i2c-for-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cadence: Change large transfer count reset logic to be unconditional
i2c: imx: fix typo in comment
i2c: mlxcpld: Fix register setting for 400KHz frequency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix several regmap usage issues in gpio-pca953x
- fix out-of-tree build for GPIO selftests
- fix integer overflow in gpio-xilinx
* tag 'gpio-fixes-for-v5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: gpio-xilinx: Fix integer overflow
selftests: gpio: fix include path to kernel headers for out of tree builds
gpio: pca953x: use the correct register address when regcache sync during init
gpio: pca953x: use the correct range when do regmap sync
gpio: pca953x: only use single read/write for No AI mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Only driver fixes:
- NULL check for the ralink and sunplus drivers
- Add Jacky Bai as maintainer for the Freescale pin controllers
- Fix pin config ops for the Ocelot LAN966x and SparX5
- Disallow AMD pin control to be a module: the GPIO lines need to be
active in early boot, so no can do
- Fix the Armada 37xx to use raw spinlocks in the interrupt handler
path to avoid wait context"
* tag 'pinctrl-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: armada-37xx: use raw spinlocks for regmap to avoid invalid wait context
pinctrl: armada-37xx: make irq_lock a raw spinlock to avoid invalid wait context
pinctrl: Don't allow PINCTRL_AMD to be a module
pinctrl: ocelot: Fix pincfg
pinctrl: ocelot: Fix pincfg for lan966x
MAINTAINERS: Update freescale pin controllers maintainer
pinctrl: sunplus: Add check for kcalloc
pinctrl: ralink: Check for null return of devm_kcalloc
|
|
When CONFIG_COMPAT=y the vdso_install target fails:
$ make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- vdso_install
INSTALL vdso.so
make[1]: *** No rule to make target 'vdso_install'. Stop.
make: *** [arch/riscv/Makefile:112: vdso_install] Error 2
The problem is that arch/riscv/kernel/compat_vdso/Makefile doesn't
have a vdso_install target, but instead calls it compat_vdso_install.
Signed-off-by: Emil Renner Berthing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Fixes: 0715372a06ce ("riscv: compat: vdso: Add COMPAT_VDSO base code implementation")
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only undoes the Rockchip BCLK changes to address a regression"
* tag 'sound-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rockchip-i2s: Undo BCLK pinctrl changes
ASoC: rockchip: i2s: Fix NULL pointer dereference when pinctrl is not found
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
- sdhci-omap: Fix a lockdep warning while probing
* tag 'mmc-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-omap: Fix a lockdep warning for PM runtime init
|
|
Pull drm fixes from Dave Airlie:
"Fixes for this week.
The main one is the i915 firmware fix for the phoronix reported issue.
I've written some firmware guidelines as a result, should land in
-next soon. Otherwise a few amdgpu fixes, a scheduler fix, ttm fix and
two other minor ones.
scheduler:
- scheduling while atomic fix
ttm:
- locking fix
edp:
- variable typo fix
i915:
- add back support for v69 firmware on ADL-P
amdgpu:
- Drop redundant buffer cleanup that can lead to a segfault
- Add a bo_list mutex to avoid possible list corruption in CS
- dmub notification fix
imx:
- fix error path"
* tag 'drm-fixes-2022-07-22' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2
drm/imx/dcss: Add missing of_node_put() in fail path
drm/i915/guc: support v69 in parallel to v70
drm/i915/guc: Support programming the EU priority in the GuC descriptor
drm/panel-edp: Fix variable typo when saving hpd absent delay from DT
drm/amdgpu: Remove one duplicated ef removal
drm/ttm: fix locking in vmap/vunmap TTM GEM helpers
drm/scheduler: Don't kill jobs in interrupt context
drm/amd/display: Fix new dmub notification enabling in DM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This contains a pair of commits that fix 282d8998e997 ("srcu: Prevent
expedited GPs and blocking readers from consuming CPU"), which was
itself a fix to an SRCU expedited grace-period problem that could
prevent kernel live patching (KLP) from completing.
That SRCU fix for KLP introduced large (as in minutes) boot-time
delays to embedded Linux kernels running on qemu/KVM. These delays
were due to the emulation of certain MMIO operations controlling
memory layout, which were emulated with one expedited grace period per
access. Common configurations required thousands of boot-time MMIO
accesses, and thus thousands of boot-time expedited SRCU grace
periods.
In these configurations, the occasional sleeps that allowed KLP to
proceed caused excessive boot delays. These commits preserve enough
sleeps to permit KLP to proceed, but few enough that the virtual
embedded kernels still boot reasonably quickly.
This represents a regression introduced in the v5.19 merge window, and
the bug is causing significant inconvenience"
* tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
srcu: Make expedited RCU grace periods block even less frequently
srcu: Block less aggressively for expedited grace periods
|
|
Sudip reports that alpha doesn't build properly, with errors like
include/asm-generic/tlb.h:401:1: error: redefinition of 'tlb_update_vma_flags'
401 | tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma)
| ^~~~~~~~~~~~~~~~~~~~
include/asm-generic/tlb.h:372:1: note: previous definition of 'tlb_update_vma_flags' with type 'void(struct mmu_gather *, struct vm_area_struct *)'
372 | tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma) { }
the cause being that We have this odd situation where some architectures
were never converted to the newer TLB flushing interfaces that have a
range for the flush. Instead people left them alone, and we have them
select the MMU_GATHER_NO_RANGE config option to make the tlb header
files account for this.
Peter Zijlstra cleaned some of these nasty header file games up in
commits
1e9fdf21a433 ("mmu_gather: Remove per arch tlb_{start,end}_vma()")
18ba064e42df ("mmu_gather: Let there be one tlb_{start,end}_vma() implementation")
but tlb_update_vma_flags() was left alone, and then commit b67fbebd4cf9
("mmu_gather: Force tlb-flush VM_PFNMAP vmas") ended up removing only
_one_ of the two stale duplicate dummy inline functions.
This removes the other stale one.
Somebody braver than me should try to remove MMU_GATHER_NO_RANGE
entirely, but it requires fixing up the oddball architectures that use
it: alpha, m68k, microblaze, nios2 and openrisc.
The fixups should be fairly straightforward ("fix the build errors it
exposes by adding the appropriate range arguments"), but the reason this
wasn't done in the first place is that so few people end up working on
those architectures. But it could be done one architecture at a time,
hint, hint.
Reported-by: Sudip Mukherjee (Codethink) <[email protected]>
Fixes: b67fbebd4cf9 ("mmu_gather: Force tlb-flush VM_PFNMAP vmas")
Link: https://lore.kernel.org/all/YtpXh0QHWwaEWVAY@debian/
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: "Aneesh Kumar K.V" <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Nick Piggin <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Laurence reports:
"Kernel >5.18 on Zaurus has a bug where the power management code can't
talk to devices, emitting the following errors:
sharpsl-pm sharpsl-pm: Error: AC check failed: voltage -22.
sharpsl-pm sharpsl-pm: Charging Error!
sharpsl-pm sharpsl-pm: Warning: Cannot read main battery!
Looking at the recent changes, I found that commit 31455bbda208 ("spi:
pxa2xx_spi: Convert to use GPIO descriptors") replaced the deprecated
SPI chip select platform device code with a gpiod lookup table. However,
this didn't seem to work until I changed the `dev_id` member from the
device name to the bus id. I'm not entirely sure why this is necessary,
but I suspect it is related to the fact that in sysfs SPI devices are
attached under /sys/devices/.../dev_name/spi_master/spiB/spiB.C, rather
than directly to the device."
After reviewing the change I conclude that the same fix is needed
for all affected boards.
Fixes: 31455bbda208 ("spi: pxa2xx_spi: Convert to use GPIO descriptors")
Reported-by: Laurence de Bruxelles <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Commit 527701eda5f1 ("lib: Add a generic version of devmem_is_allowed()")
introduces the config symbol GENERIC_LIB_DEVMEM_IS_ALLOWED, but then
falsely refers to CONFIG_GENERIC_DEVMEM_IS_ALLOWED (note the missing LIB
in the reference) in ./include/asm-generic/io.h.
Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs:
GENERIC_DEVMEM_IS_ALLOWED
Referencing files: include/asm-generic/io.h
The actual fix, though, is simply to not to make this function declaration
dependent on any kernel config. For architectures that intend to use
the generic version, the arch's 'select GENERIC_LIB_DEVMEM_IS_ALLOWED' will
lead to picking the function definition, and for other architectures, this
function is simply defined elsewhere.
The wrong '#ifndef' on a non-existing config symbol also always had the
same effect (although more by mistake than by intent). So, there is no
functional change.
Remove this broken and needless ifdef conditional.
Fixes: 527701eda5f1 ("lib: Add a generic version of devmem_is_allowed()")
Signed-off-by: Lukas Bulwahn <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
zynqmp_get_error_info() writes 0 to the ECC_CLR_OFST register after
an interrupt for a {un-,}correctable error is raised, which disables
the error interrupts. Then the interrupt handler will be called only
once. Therefore, re-enable the error interrupt line at the end of
intr_handler() for v3.x Synopsys EDAC DDR.
Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Sherry Sun <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Shubhrajyoti Datta <[email protected]>
Acked-by: Michal Simek <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
v3.x Synopsys EDAC DDR doesn't have the QOS Interrupt register. Use the
ECC Clear Register to disable the error interrupts instead.
Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR")
Signed-off-by: Sherry Sun <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Shubhrajyoti Datta <[email protected]>
Acked-by: Michal Simek <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Bitmap are "unsigned long", so use it instead of a "u32" to make things
more explicit.
While at it, remove some useless cast (and leading spaces) when using the
bitmap API.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The phy-reset-* properties are missing type definitions and are not common
properties. Even though they are deprecated, a type is needed.
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
While the if/then schemas mostly work, there's a few issues. The 'allOf'
schema will also be true if 'fixed-link' is not an array or object as a
false 'if' schema (without an 'else') will be true. In the array case
doesn't set the type (uint32-array) in the 'then' clause. In the node case,
'additionalProperties' is missing.
Rework the schema to use oneOf with each possible type.
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Kuniyuki Iwashima says:
====================
sysctl: Fix data-races around ipv4_net_table (Round 5).
This series fixes data-races around 15 knobs after tcp_dsack in
ipv4_net_table.
tcp_tso_win_divisor was skipped because it already uses READ_ONCE().
So, the final round for ipv4_net_table will start with tcp_pacing_ss_ratio.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
While reading sysctl_tcp_invalid_ratelimit, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 032ee4236954 ("tcp: helpers to mitigate ACK loops by rate-limiting out-of-window dupacks")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|