aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-08-03udp: fix dst races with multicast early demuxEric Dumazet1-3/+10
Multicast dst are not cached. They carry DST_NOCACHE. As mentioned in commit f8864972126899 ("ipv4: fix dst race in sk_dst_get()"), these dst need special care before caching them into a socket. Caching them is allowed only if their refcnt was not 0, ie we must use atomic_inc_not_zero() Also, we must use READ_ONCE() to fetch sk->sk_rx_dst, as mentioned in commit d0c294c53a771 ("tcp: prevent fetching dst twice in early demux code") Fixes: 421b3885bf6d ("udp: ipv4: Add udp early demux") Tested-by: Gregory Hoggarth <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Gregory Hoggarth <[email protected]> Reported-by: Alex Gartrell <[email protected]> Cc: Michal Kubeček <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-033c59x: Fix resource leaks in vortex_openJia-Ju Bai1-9/+8
When vortex_up is failed, the skb buffers allocated by __netdev_alloc_skb in vortex_open are not released, which may cause resource leaks. This bug has been submitted before. This patch modifies the error handling code to fix it. Signed-off-by: Jia-Ju Bai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-03rds: fix an integer overflow test in rds_info_getsockopt()Dan Carpenter1-1/+1
"len" is a signed integer. We check that len is not negative, so it goes from zero to INT_MAX. PAGE_SIZE is unsigned long so the comparison is type promoted to unsigned long. ULONG_MAX - 4095 is a higher than INT_MAX so the condition can never be true. I don't know if this is harmful but it seems safe to limit "len" to INT_MAX - 4095. Fixes: a8c879a7ee98 ('RDS: Info and stats') Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-03act_mirred: avoid calling tcf_hash_release() when bindingWANG Cong1-0/+2
When we share an action within a filter, the bind refcnt should increase, therefore we should not call tcf_hash_release(). Cc: Jamal Hadi Salim <[email protected]> Cc: Daniel Borkmann <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-03openvswitch: Fix L4 checksum handling when dealing with IP fragmentsGlenn Griffin1-4/+12
openvswitch modifies the L4 checksum of a packet when modifying the ip address. When an IP packet is fragmented only the first fragment contains an L4 header and checksum. Prior to this change openvswitch would modify all fragments, modifying application data in non-first fragments, causing checksum failures in the reassembled packet. Signed-off-by: Glenn Griffin <[email protected]> Acked-by: Pravin B Shelar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-02fq_codel: explicitly reset flows in ->reset()Eric Dumazet1-3/+19
Alex reported the following crash when using fq_codel with htb: crash> bt PID: 630839 TASK: ffff8823c990d280 CPU: 14 COMMAND: "tc" [... snip ...] #8 [ffff8820ceec17a0] page_fault at ffffffff8160a8c2 [exception RIP: htb_qlen_notify+24] RIP: ffffffffa0841718 RSP: ffff8820ceec1858 RFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88241747b400 RDX: ffff88241747b408 RSI: 0000000000000000 RDI: ffff8811fb27d000 RBP: ffff8820ceec1868 R8: ffff88120cdeff24 R9: ffff88120cdeff30 R10: 0000000000000bd4 R11: ffffffffa0840919 R12: ffffffffa0843340 R13: 0000000000000000 R14: 0000000000000001 R15: ffff8808dae5c2e8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #9 [...] qdisc_tree_decrease_qlen at ffffffff81565375 #10 [...] fq_codel_dequeue at ffffffffa084e0a0 [sch_fq_codel] #11 [...] fq_codel_reset at ffffffffa084e2f8 [sch_fq_codel] #12 [...] qdisc_destroy at ffffffff81560d2d #13 [...] htb_destroy_class at ffffffffa08408f8 [sch_htb] #14 [...] htb_put at ffffffffa084095c [sch_htb] #15 [...] tc_ctl_tclass at ffffffff815645a3 #16 [...] rtnetlink_rcv_msg at ffffffff81552cb0 [... snip ...] As Jamal pointed out, there is actually no need to call dequeue to purge the queued skb's in reset, data structures can be just reset explicitly. Therefore, we reset everything except config's and stats, so that we would have a fresh start after device flipping. Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM") Reported-by: Alex Gartrell <[email protected]> Cc: Alex Gartrell <[email protected]> Cc: Jamal Hadi Salim <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> [[email protected]: added codel_vars_init() and qdisc_qstats_backlog_dec()] Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-02rocker: free netdevice during netdevice removalIdo Schimmel1-0/+1
When removing a port's netdevice in 'rocker_remove_ports', we should also free the allocated 'net_device' structure. Do that by calling 'free_netdev' after unregistering it. Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Fixes: 4b8ac9660af ("rocker: introduce rocker switch driver") Acked-by: Scott Feldman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds78-539/+1000
Pull networking fixes from David Miller: 1) Must teardown SR-IOV before unregistering netdev in igb driver, from Alex Williamson. 2) Fix ipv6 route unreachable crash in IPVS, from Alex Gartrell. 3) Default route selection in ipv4 should take the prefix length, table ID, and TOS into account, from Julian Anastasov. 4) sch_plug must have a reset method in order to purge all buffered packets when the qdisc is reset, likewise for sch_choke, from WANG Cong. 5) Fix deadlock and races in slave_changelink/br_setport in bridging. From Nikolay Aleksandrov. 6) mlx4 bug fixes (wrong index in port even propagation to VFs, overzealous BUG_ON assertion, etc.) from Ido Shamay, Jack Morgenstein, and Or Gerlitz. 7) Turn off klog message about SCTP userspace interface compat that makes no sense at all, from Daniel Borkmann. 8) Fix unbounded restarts of inet frag eviction process, causing NMI watchdog soft lockup messages, from Florian Westphal. 9) Suspend/resume fixes for r8152 from Hayes Wang. 10) Fix busy loop when MSG_WAITALL|MSG_PEEK is used in TCP recv, from Sabrina Dubroca. 11) Fix performance regression when removing a lot of routes from the ipv4 routing tables, from Alexander Duyck. 12) Fix device leak in AF_PACKET, from Lars Westerhoff. 13) AF_PACKET also has a header length comparison bug due to signedness, from Alexander Drozdov. 14) Fix bug in EBPF tail call generation on x86, from Daniel Borkmann. 15) Memory leaks, TSO stats, watchdog timeout and other fixes to thunderx driver from Sunil Goutham and Thanneeru Srinivasulu. 16) act_bpf can leak memory when replacing programs, from Daniel Borkmann. 17) WOL packet fixes in gianfar driver, from Claudiu Manoil. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits) stmmac: fix missing MODULE_LICENSE in stmmac_platform gianfar: Enable device wakeup when appropriate gianfar: Fix suspend/resume for wol magic packet gianfar: Fix warning when CONFIG_PM off act_pedit: check binding before calling tcf_hash_release() net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket net: sched: fix refcount imbalance in actions r8152: reset device when tx timeout r8152: add pre_reset and post_reset qlcnic: Fix corruption while copying act_bpf: fix memory leaks when replacing bpf programs net: thunderx: Fix for crash while BGX teardown net: thunderx: Add PCI driver shutdown routine net: thunderx: Fix crash when changing rss with mutliple traffic flows net: thunderx: Set watchdog timeout value net: thunderx: Wakeup TXQ only if CQE_TX are processed net: thunderx: Suppress alloc_pages() failure warnings net: thunderx: Fix TSO packet statistic net: thunderx: Fix memory leak when changing queue count net: thunderx: Fix RQ_DROP miscalculation ...
2015-07-31Merge branch 'for-linus-4.2' of ↵Linus Torvalds4-3/+23
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Filipe fixed up a hard to trigger ENOSPC regression from our merge window pull, and we have a few other smaller fixes" * 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix quick exhaustion of the system array in the superblock btrfs: its btrfs_err() instead of btrfs_error() btrfs: Avoid NULL pointer dereference of free_extent_buffer when read_tree_block() fail btrfs: Fix lockdep warning of btrfs_run_delayed_iputs()
2015-07-31Merge tag 'sound-4.2-rc5' of ↵Linus Torvalds27-69/+164
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This became a relative big update as it includes the collected ASoC fixes. There are a few fixes in ASoC core side, mostly for DAPM and the new topology API. The rest are various ASoC driver-specific fixes, as well as the usual HD-audio and USB-audio quirks" * tag 'sound-4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits) ALSA: hda - Fix MacBook Pro 5,2 quirk ALSA: hda - Fix race between PM ops and HDA init/probe ALSA: usb-audio: add dB range mapping for some devices ALSA: hda - Apply a fixup to Dell Vostro 5480 ALSA: hda - Add pin quirk for the headset mic jack detection on Dell laptop ALSA: hda - Apply fixup for another Toshiba Satellite S50D ALSA: fireworks: add support for AudioFire2 quirk ALSA: hda - Fix the headset mic that will not work on Dell desktop machine ALSA: hda - fix cs4210_spdif_automute() ASoC: pcm1681: Fix setting de-emphasis sampling rate selection ASoC: ssm4567: Keep TDM_BCLKS in ssm4567_set_dai_fmt ASoC: sgtl5000: Fix up define for SGTL5000_SMALL_POP ASoC: dapm: Don't add prefix to widget stream name ASoC: rt5645: Check if codec is initialized in workqueue handler ASoC: Intel: Get correct usage_count value to load firmware ASoC: topology: Fix to add dapm mixer info ASoC: zx: spdif: Fix devm_ioremap_resource return value check ASoC: zx: i2s: Fix devm_ioremap_resource return value check ASoC: mediatek: Use platform_of_node for machine drivers ASoC: Free card DAPM context on snd_soc_instantiate_card() error path ...
2015-07-31stmmac: fix missing MODULE_LICENSE in stmmac_platformJoachim Eastwood1-0/+4
Commit 50649ab14982 ("stmmac: drop driver from stmmac platform code") was a bit overzealous in removing code and dropped the MODULE_* macro's that are still needed since stmmac_platform can be a module. Fix this by putting the macro's remvoed in 50649ab14982 back. This fixes the following errors when used as a module: stmmac_platform: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint stmmac_platform: Unknown symbol devm_kmalloc (err 0) stmmac_platform: Unknown symbol stmmac_suspend (err 0) stmmac_platform: Unknown symbol platform_get_irq_byname (err 0) stmmac_platform: Unknown symbol stmmac_dvr_remove (err 0) stmmac_platform: Unknown symbol platform_get_resource (err 0) stmmac_platform: Unknown symbol of_get_phy_mode (err 0) stmmac_platform: Unknown symbol of_property_read_u32_array (err 0) stmmac_platform: Unknown symbol of_alias_get_id (err 0) stmmac_platform: Unknown symbol stmmac_resume (err 0) stmmac_platform: Unknown symbol stmmac_dvr_probe (err 0) Fixes: 50649ab14982 ("stmmac: drop driver from stmmac platform code") Reported-by: Igor Gnatenko <[email protected]> Signed-off-by: Joachim Eastwood <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-31Merge branch 'gianfar-wol-fixes'David S. Miller3-79/+33
Claudiu Manoil says: ==================== gianfar: wol magic packet fixes These changes were already validated as part of FSL SDK. Patch 2 fixes occasional wake-on magic packet failures during traffic, probably due to incorrect traffic stop/ device halt sequence and incorrect usage of txlock. ==================== Signed-off-by: David S. Miller <[email protected]>
2015-07-31gianfar: Enable device wakeup when appropriateClaudiu Manoil3-13/+3
The wol_en flag is 0 by default anyway, and we have the following inconsistency: a MAGIC packet wol capable eth interface is registered as a wake-up source but unable to wake-up the system as wol_en is 0 (wake-on flag set to 'd'). Calling set_wakeup_enable() at netdev open is just redundant because wol_en is 0 by default. Let only ethtool call set_wakeup_enable() for now. The bflock is obviously obsoleted, its utility has been corroded over time. The bitfield flags used today in gianfar are accessed only on the init/ config path, with no real possibility of concurrency - nothing that would justify smth. like bflock. Signed-off-by: Claudiu Manoil <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-31gianfar: Fix suspend/resume for wol magic packetClaudiu Manoil1-68/+30
If we disable NAPI in the first place we can mask the device's interrupts (and halt it) without fearing that imask may be concurrently accessed from interrupt context, so there's no need to do local_irq_save() around gfar_halt_nodisable(). lock_rx_qs()/unlock_tx_qs() are just obsoleted and potentially buggy routines. The txlock is currently used in the driver only to manage TX congestion, it has nothing to do with halting the device. With these changes, the TX processing is stopped before gfar_halt(). Compact gfar_halt() is used instead of gfar_halt_nodisable(), as it disables Rx/TX DMA h/w blocks and the Rx/TX h/w queues. gfar_start() re-enables all these blocks on resume. Enabling the magic-packet mode remains the same, note that the RX block is re-enabled just before entering sleep mode. Add IRQF_NO_SUSPEND flag for the error interrupt line, to signal that the interrupt line must remain active during sleep in order to wake the system by magic packet (MAG) reception interrupt. (On some systems the MAG interrupt did trigger w/o this flag as well, but on others it didn't.) Without these fixes, when suspended during fair Tx traffic the interface occasionally failed to be woken up by magic packet. Signed-off-by: Claudiu Manoil <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-31gianfar: Fix warning when CONFIG_PM offClaudiu Manoil1-0/+2
CC drivers/net/ethernet/freescale/gianfar.o drivers/net/ethernet/freescale/gianfar.c:568:13: warning: 'lock_tx_qs' defined but not used [-Wunused-function] static void lock_tx_qs(struct gfar_private *priv) ^ drivers/net/ethernet/freescale/gianfar.c:576:13: warning: 'unlock_tx_qs' defined but not used [-Wunused-function] static void unlock_tx_qs(struct gfar_private *priv) ^ Reported-by: Scott Wood <[email protected]> Signed-off-by: Claudiu Manoil <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-31act_pedit: check binding before calling tcf_hash_release()WANG Cong1-3/+2
When we share an action within a filter, the bind refcnt should increase, therefore we should not call tcf_hash_release(). Fixes: 1a29321ed045 ("net_sched: act: Dont increment refcnt on replace") Cc: Jamal Hadi Salim <[email protected]> Cc: Daniel Borkmann <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Cong Wang <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-31Merge tag 'iommu-fixes-v4.2-rc4' of ↵Linus Torvalds3-81/+51
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "These fixes are all for the AMD IOMMU driver: - A regression with HSA caused by the conversion of the driver to default domains. The fixes make sure that an HSA device can still be attached to an IOMMUv2 domain and that these domains also allow non-IOMMUv2 capable devices. - Fix iommu=pt mode which did not work because the dma_ops where set to nommu_ops, which breaks devices that can only do 32bit DMA. - Fix an issue with non-PCI devices not working, because there are no dma_ops for them. This issue was discovered recently as new AMD x86 platforms have non-PCI devices too" * tag 'iommu-fixes-v4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Allow non-ATS devices in IOMMUv2 domains iommu/amd: Set global dma_ops if swiotlb is disabled iommu/amd: Use swiotlb in passthrough mode iommu/amd: Allow non-IOMMUv2 devices in IOMMUv2 domains iommu/amd: Use iommu core for passthrough mode iommu/amd: Use iommu_attach_group()
2015-07-31Merge tag 'drm-intel-fixes-2015-07-31' of ↵Linus Torvalds3-10/+23
git://anongit.freedesktop.org/drm-intel Pull drm intel fixes from Daniel Vetter: "I delayed my -fixes pull a bit hoping that I could include a fix for the dp mst stuff but looks a bit more nasty than that. So just 3 other regression fixes, one 4.2 other two cc: stable" * tag 'drm-intel-fixes-2015-07-31' of git://anongit.freedesktop.org/drm-intel: drm/i915: Declare the swizzling unknown for L-shaped configurations drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt drm/i915: Replace WARN inside I915_READ64_2x32 with retry loop
2015-07-31Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds43-274/+554
Pull drm fixes from Dave Airlie: "This has a bunch of nouveau fixes, as Ben has been hibernating and has lots of small fixes for lots of bugs across nouveau. Radeon has one major fix for hdmi/dp audio regression that is larger than Alex would like, but seems to fix up a fair few bugs, along with some misc fixes. And a few msm fixes, one of which is also a bit large. But nothing in here seems insane or crazy for this stage, just more than I'd like" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits) drm/msm/mdp5: release SMB (shared memory blocks) in various cases drm/msm: change to uninterruptible wait in atomic commit drm/msm: mdp4: Fix drm_framebuffer dereference crash drm/msm: fix msm_gem_prime_get_sg_table() drm/amdgpu: add new parameter to seperate map and unmap drm/amdgpu: hdp_flush is not needed for inside IB drm/amdgpu: different emit_ib for gfx and compute drm/amdgpu: information leak in amdgpu_info_ioctl() drm/amdgpu: clean up init sequence for failures drm/radeon/combios: add some validation of lvds values drm/radeon: rework audio modeset to handle non-audio hdmi features drm/radeon: rework audio detect (v4) drm/amdgpu: Drop drm/ prefix for including drm.h in amdgpu_drm.h drm/radeon: Drop drm/ prefix for including drm.h in radeon_drm.h drm/nouveau/nouveau/ttm: fix tiled system memory with Maxwell drm/nouveau/kms/nv50-: guard against enabling cursor on disabled heads drm/nouveau/fbcon/g80: reduce PUSH_SPACE alloc, fire ring on accel init drm/nouveau/fbcon/gf100-: reduce RING_SPACE allocation drm/nouveau/fbcon/nv11-: correctly account for ring space usage drm/nouveau/bios: add proper support for opcode 0x59 ...
2015-07-31iommu/amd: Allow non-ATS devices in IOMMUv2 domainsJoerg Roedel1-1/+6
With the grouping of multi-function devices a non-ATS capable device might also end up in the same domain as an IOMMUv2 capable device. So handle this situation gracefully and don't consider it a bug anymore. Tested-by: Oded Gabbay <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2015-07-30Merge tag 'xfs-for-linus-4.2-rc4' of ↵Linus Torvalds4-21/+69
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs fixes from Dave Chinner: "There are a couple of recently found, long standing remote attribute corruption fixes caused by log recovery getting confused after a crash, and the new DAX code in XFS (merged in 4.2-rc1) needs to actually use the DAX fault path on read faults. Summary: - remote attribute log recovery corruption fixes - DAX page faults need to use direct mappings, not a page cache mapping" * tag 'xfs-for-linus-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: remote attributes need to be considered data xfs: remote attribute headers contain an invalid LSN xfs: call dax_fault on read page faults for DAX
2015-07-30net: sk_clone_lock() should only do get_net() if the parent is not a kernel ↵Sowmini Varadhan1-1/+2
socket The newsk returned by sk_clone_lock should hold a get_net() reference if, and only if, the parent is not a kernel socket (making this similar to sk_alloc()). E.g,. for the SYN_RECV path, tcp_v4_syn_recv_sock->..inet_csk_clone_lock sets up the syn_recv newsk from sk_clone_lock. When the parent (listen) socket is a kernel socket (defined in sk_alloc() as having sk_net_refcnt == 0), then the newsk should also have a 0 sk_net_refcnt and should not hold a get_net() reference. Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Acked-by: Eric Dumazet <[email protected]> Cc: Eric W. Biederman <[email protected]> Signed-off-by: Sowmini Varadhan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-30net: sched: fix refcount imbalance in actionsDaniel Borkmann2-6/+13
Since commit 55334a5db5cd ("net_sched: act: refuse to remove bound action outside"), we end up with a wrong reference count for a tc action. Test case 1: FOO="1,6 0 0 4294967295," BAR="1,6 0 0 4294967294," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 \ action bpf bytecode "$FOO" tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 1 ref 1 bind 1 tc actions replace action bpf bytecode "$BAR" index 1 tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967294' default-action pipe index 1 ref 2 bind 1 tc actions replace action bpf bytecode "$FOO" index 1 tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 1 ref 3 bind 1 Test case 2: FOO="1,6 0 0 4294967295," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 1 bind 1 tc actions add action drop index 1 RTNETLINK answers: File exists [...] tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 2 bind 1 tc actions add action drop index 1 RTNETLINK answers: File exists [...] tc actions show action gact action order 0: gact action pass random type none pass val 0 index 1 ref 3 bind 1 What happens is that in tcf_hash_check(), we check tcf_common for a given index and increase tcfc_refcnt and conditionally tcfc_bindcnt when we've found an existing action. Now there are the following cases: 1) We do a late binding of an action. In that case, we leave the tcfc_refcnt/tcfc_bindcnt increased and are done with the ->init() handler. This is correctly handeled. 2) We replace the given action, or we try to add one without replacing and find out that the action at a specific index already exists (thus, we go out with error in that case). In case of 2), we have to undo the reference count increase from tcf_hash_check() in the tcf_hash_check() function. Currently, we fail to do so because of the 'tcfc_bindcnt > 0' check which bails out early with an -EPERM error. Now, while commit 55334a5db5cd prevents 'tc actions del action ...' on an already classifier-bound action to drop the reference count (which could then become negative, wrap around etc), this restriction only accounts for invocations outside a specific action's ->init() handler. One possible solution would be to add a flag thus we possibly trigger the -EPERM ony in situations where it is indeed relevant. After the patch, above test cases have correct reference count again. Fixes: 55334a5db5cd ("net_sched: act: refuse to remove bound action outside") Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-30Merge branch 'r8152-fixes'David S. Miller1-4/+57
Hayes Wang says: ==================== r8152: device reset v3: For patch #2, remove cancel_delayed_work(). v2: For patch #1, remove usb_autopm_get_interface(), usb_autopm_put_interface(), and the checking of intf->condition. For patch #2, replace the original method with usb_queue_reset_device() to reset the device. v1: Although the driver works normally, we find the device may get all 0xff data when transmitting packets on certain platforms. It would break the device and no packet could be transmitted. The reset is necessary to recover the hw for this situation. ==================== Signed-off-by: David S. Miller <[email protected]>
2015-07-30r8152: reset device when tx timeouthayeswang1-4/+3
The device reset is necessary if the hw becomes abnormal and stops transmitting packets. Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-30r8152: add pre_reset and post_resethayeswang1-0/+54
Add rtl8152_pre_reset() and rtl8152_post_reset() which are used when calling usb_reset_device(). The two functions could reduce the time of reset when calling usb_reset_device() after probe(). Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-30ALSA: hda - Fix MacBook Pro 5,2 quirkTakashi Iwai1-1/+1
MacBook Pro 5,2 with ALC889 codec had already a fixup entry, but this seems not working correctly, a fix for pin NID 0x15 is needed in addition. It's equivalent with the fixup for MacBook Air 1,1, so use this instead. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102131 Reported-and-tested-by: Jeffery Miller <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2015-07-30Merge branch 'for-linus' of ↵Linus Torvalds6-56/+130
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "The main change is support for keyboards and touchpads found in 2015 editions of Macbooks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: zforce - don't overwrite the stack" Input: bcm5974 - add support for the 2015 Macbook Pro HID: apple: Add support for the 2015 Macbook Pro Input: bcm5974 - prepare for a new trackpad generation Input: synaptics - dump ext10 capabilities as well
2015-07-30Merge tag 'hwmon-for-linus-v4.2-rc5' of ↵Linus Torvalds3-31/+32
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two patches headed for -stable. nct7802: Fix integer overflow seen when writing voltage limits nct7904: Rename pwm attributes to match hwmon ABI" * tag 'hwmon-for-linus-v4.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct7802) Fix integer overflow seen when writing voltage limits hwmon: (nct7904) Rename pwm attributes to match hwmon ABI
2015-07-30drm/i915: Declare the swizzling unknown for L-shaped configurationsChris Wilson1-1/+4
The old style of memory interleaving swizzled upto the end of the first even bank of memory, and then used the remainder as unswizzled on the unpaired bank - i.e. swizzling is not constant for all memory. This causes problems when we try to migrate memory and so the kernel prevents migration at all when we detect L-shaped inconsistent swizzling. However, this issue also extends to userspace who try to manually detile into memory as the swizzling for an individual page is unknown (it depends on its physical address only known to the kernel), userspace cannot correctly swizzle. Note that this is a new attempt for the previously merged one, reverted in commit d82c0ba6e306f079407f07003e53c262d683397b Author: Daniel Vetter <[email protected]> Date: Tue Jul 14 12:29:27 2015 +0200 Revert "drm/i915: Declare the swizzling unknown for L-shaped configurations" This is cc: stable since we need it to fix up troubles with wc cpu mmaps that userspace recently started to use widely. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91105 Signed-off-by: Chris Wilson <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] [danvet: Add note about previous (failed attempt).] Signed-off-by: Daniel Vetter <[email protected]>
2015-07-30drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgttChris Wilson1-0/+11
If the device does not support the aliasing ppgtt, we must translate user bind requests (PIN_USER) from LOCAL_BIND to a GLOBAL_BIND. However, since this is device specific we cannot do this conveniently in the upper layers and so must manage the vma->bound flags in the backend. Partial revert of commit 75d04a3773ecee617847de963ae4195d6aa74c28 [4.2-rc1] Author: Mika Kuoppala <[email protected]> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound Note this was spotted by Daniel originally, but we dropped the ball in getting the fix in before the bug going wild. Sorry all. Reported-by: Vincent Legoll [email protected] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91133 References: https://bugs.freedesktop.org/show_bug.cgi?id=90224 Signed-off-by: Chris Wilson <[email protected]> Cc: Michel Thierry <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: Jani Nikula <[email protected]> Signed-off-by: Daniel Vetter <[email protected]>
2015-07-30iommu/amd: Set global dma_ops if swiotlb is disabledJoerg Roedel1-0/+9
Some AMD systems also have non-PCI devices which can do DMA. Those can't be handled by the AMD IOMMU, as the hardware can only handle PCI. These devices would end up with no dma_ops, as neither the per-device nor the global dma_ops will get set. SWIOTLB provides global dma_ops when it is active, so make sure there are global dma_ops too when swiotlb is disabled. Signed-off-by: Joerg Roedel <[email protected]>
2015-07-30iommu/amd: Use swiotlb in passthrough modeJoerg Roedel1-5/+3
In passthrough mode (iommu=pt) all devices are identity mapped. If a device does not support 64bit DMA it might still need remapping. Make sure swiotlb is initialized to provide this remapping. Signed-off-by: Joerg Roedel <[email protected]>
2015-07-30iommu/amd: Allow non-IOMMUv2 devices in IOMMUv2 domainsJoerg Roedel1-7/+9
Since devices with IOMMUv2 functionality might be in the same group as devices without it, allow those devices in IOMMUv2 domains too. Otherwise attaching the group with the IOMMUv2 device to the domain will fail. Signed-off-by: Joerg Roedel <[email protected]>
2015-07-30iommu/amd: Use iommu core for passthrough modeJoerg Roedel2-65/+3
Remove the AMD IOMMU driver implementation for passthrough mode and rely on the new iommu core features for that. Signed-off-by: Joerg Roedel <[email protected]>
2015-07-30iommu/amd: Use iommu_attach_group()Joerg Roedel1-3/+21
Since the conversion to default domains the iommu_attach_device function only works for devices with their own group. But this isn't always true for current IOMMUv2 capable devices, so use iommu_attach_group instead. Signed-off-by: Joerg Roedel <[email protected]>
2015-07-29qlcnic: Fix corruption while copyingShahed Shaikh1-1/+1
Use proper typecasting while performing byte-by-byte copy Signed-off-by: Shahed Shaikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-29act_bpf: fix memory leaks when replacing bpf programsDaniel Borkmann1-18/+35
We currently trigger multiple memory leaks when replacing bpf actions, besides others: comm "tc", pid 1909, jiffies 4294851310 (age 1602.796s) hex dump (first 32 bytes): 01 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 ................ 18 b0 98 6d 00 88 ff ff 00 00 00 00 00 00 00 00 ...m............ backtrace: [<ffffffff817e623e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8120a22d>] __vmalloc_node_range+0x1bd/0x2c0 [<ffffffff8120a37a>] __vmalloc+0x4a/0x50 [<ffffffff811a8d0a>] bpf_prog_alloc+0x3a/0xa0 [<ffffffff816c0684>] bpf_prog_create+0x44/0xa0 [<ffffffffa09ba4eb>] tcf_bpf_init+0x28b/0x3c0 [act_bpf] [<ffffffff816d7001>] tcf_action_init_1+0x191/0x1b0 [<ffffffff816d70a2>] tcf_action_init+0x82/0xf0 [<ffffffff816d4d12>] tcf_exts_validate+0xb2/0xc0 [<ffffffffa09b5838>] cls_bpf_modify_existing+0x98/0x340 [cls_bpf] [<ffffffffa09b5cd6>] cls_bpf_change+0x1a6/0x274 [cls_bpf] [<ffffffff816d56e5>] tc_ctl_tfilter+0x335/0x910 [<ffffffff816b9145>] rtnetlink_rcv_msg+0x95/0x240 [<ffffffff816df34f>] netlink_rcv_skb+0xaf/0xc0 [<ffffffff816b909e>] rtnetlink_rcv+0x2e/0x40 [<ffffffff816deaaf>] netlink_unicast+0xef/0x1b0 Issue is that the old content from tcf_bpf is allocated and needs to be released when we replace it. We seem to do that since the beginning of act_bpf on the filter and insns, later on the name as well. Example test case, after patch: # FOO="1,6 0 0 4294967295," # BAR="1,6 0 0 4294967294," # tc actions add action bpf bytecode "$FOO" index 2 # tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 2 ref 1 bind 0 # tc actions replace action bpf bytecode "$BAR" index 2 # tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967294' default-action pipe index 2 ref 1 bind 0 # tc actions replace action bpf bytecode "$FOO" index 2 # tc actions show action bpf action order 0: bpf bytecode '1,6 0 0 4294967295' default-action pipe index 2 ref 1 bind 0 # tc actions del action bpf index 2 [...] # echo "scan" > /sys/kernel/debug/kmemleak # cat /sys/kernel/debug/kmemleak | grep "comm \"tc\"" | wc -l 0 Fixes: d23b8ad8ab23 ("tc: add BPF based action") Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-29Merge branch 'thunderx-fixes'David S. Miller6-37/+92
Aleksey Makarov says: ==================== net: thunderx: Misc fixes Miscellaneous fixes for the ThunderX VNIC driver All the patches can be applied individually. It's ok to drop some if the maintainer feels uncomfortable with applying for 4.2. ==================== Signed-off-by: David S. Miller <[email protected]>
2015-07-29net: thunderx: Fix for crash while BGX teardownThanneeru Srinivasulu1-1/+4
Cortina phy does not have kernel driver and we don't attach device with phy layer for intefaces like XFI, XLAUI etc, Hence check for interface type before calling disconnect. Signed-off-by: Thanneeru Srinivasulu <[email protected]> Signed-off-by: Aleksey Makarov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-29net: thunderx: Add PCI driver shutdown routineSunil Goutham1-0/+6
Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Aleksey Makarov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-29net: thunderx: Fix crash when changing rss with mutliple traffic flowsSunil Goutham1-4/+5
This fixes a crash when changing rss with multiple traffic flows. While interface teardown, disable tx queues after all NAPI threads are done. If done otherwise tx queues might be woken up inside NAPI if any CQE_TX are processed. Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Aleksey Makarov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-29net: thunderx: Set watchdog timeout valueSunil Goutham2-0/+10
If a txq (SQ) remains in stopped state after this timeout its considered as stuck and interface is reinited. Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Aleksey Makarov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-29net: thunderx: Wakeup TXQ only if CQE_TX are processedSunil Goutham3-15/+31
Previously TXQ is wakedup whenever napi is executed and irrespective of if any CQE_TX are processed or not. Added 'txq_stop' and 'txq_wake' counters to aid in debugging if there are any future issues. Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Aleksey Makarov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-29net: thunderx: Suppress alloc_pages() failure warningsSunil Goutham1-2/+4
Suppressing standard alloc_pages() warnings. Some kernel configs limit alloc size and the network driver may fail. Do not drop a kernel warning in this case, instead just drop a oneliner that the network driver could not be loaded since the buffer could not be allocated. Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Aleksey Makarov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-29net: thunderx: Fix TSO packet statisticSunil Goutham1-0/+1
Fixing TSO packages not being counted. Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Aleksey Makarov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-29net: thunderx: Fix memory leak when changing queue countSunil Goutham1-9/+14
Fix for memory leak when changing queue/channel count via ethtool Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Aleksey Makarov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-29net: thunderx: Fix RQ_DROP miscalculationSunil Goutham1-3/+11
With earlier configured value sufficient number of CQEs are not being reserved for transmitted packets. Hence under heavy incoming traffic load, receive notifications will take away most of the CQ thus transmit notifications will be lost resulting in tx skbs not being freed. Finally SQ will be full and it will be stopped, watchdog timer will kick in. After this fix receive notifications will not take morethan half of CQ reserving the rest for transmit notifications. Also changed CQ & SQ sizes from 16k to 4k. This is also due to the receive notifications taking first half of CQ under heavy load and time taken by NAPI to clear transmit notifications will increase with higher queue sizes. Again results in SQ being stopped. Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Aleksey Makarov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-29net: thunderx: Fix memory leak while tearing down interfaceSunil Goutham2-3/+6
Fixed 'tso_hdrs' memory not being freed properly. Also fixed SQ skbuff maintenance issues. Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Aleksey Makarov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-07-29net: thunderx: Fix data integrity issues with LDWBSunil Goutham1-1/+1
Switching back to LDD transactions from LDWB. While transmitting packets out with LDWB transactions data integrity issues are seen very frequently. hence switching back to LDD. Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Robert Richter <[email protected]> Signed-off-by: Aleksey Makarov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.