| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add support for the LEDs around the mode switch to the generic code path in
support of the second generation Intuos Pro.
Signed-off-by: Aaron Skomra <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The second generation Intuos Pro is the first device in the generic codepath
which has a touchswitch. We utilize a flag in wacom_shared in order to report
this switch event received from the pad on the touch input.
Signed-off-by: Aaron Skomra <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Add vendor defined touch to support the second generation Intuos Pro.
Previously all generic Wacom devices used true HID to report their touch.
Signed-off-by: Aaron Skomra <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Add support for the touchring to the generic code path in support of the second
generation Intuos Pro.
We also add checks for usage->type to ensure that we handle the usage before we
report it, or change the inrange_state based on it.
Signed-off-by: Aaron Skomra <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Input_event_flag duplicates the information we track in
wacom_wac->hid_data.inrange_state for the pad.
Signed-off-by: Aaron Skomra <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
In addition to its USB interface, the second-generation Intuos Pro
includes a Bluetooth radio that offers two pairing interfaces: classic
and low-energy. The classic interface functions just like the earlier
Bluetooth-enabled Intuos4 and Graphire4 tablets, appearing as a HID device
that our driver can work with. The low-energy interface is intented to
be used by userspace applications that make use of its paper-to-digital
capabilities.
Despite the USB interface using Wacom's new vendor-defined HID usages,
the Bluetooth interface provides us with useless black-box "blob"
report descriptors like past devices. We thus have to explicitly add
support for the PIDs and reports used.
These devices pack a /lot/ of information into a single Bluetooth
input report. Each report contains up to seven snapshots of the pen
state, four snapshots of the touch state (of five touches each), pad
state, and battery data. Thankfully this isn't too hard for the driver
to report -- it just takes a fair amount of code to extract!
Signed-off-by: Jason Gerecke <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Centralize our definition of report IDs by moving those for device commands
into wacom_wac.h alongside those for input reports.
Signed-off-by: Jason Gerecke <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
There no reason a Bluetooth device with the appropriate HID descriptor couldn't
be used through the HID_GENERIC codepath in the future. Ensure that the driver
attempts to bind to these devices.
Signed-off-by: Jason Gerecke <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The Intuos Pro seems to not like when we set the features right after
being powered up. Instead of waiting during probe, we can schedule the
switch mode and LED control in a deferred worker so that we don't have the
5 secs of delay from USB when the device is not accessible.
The USB timeout delays were really a pain because if you happen to unplug
the tablet while it is still waiting, you are just adding 5 second timeouts
to the USB stack. Which means that a new plug of the same tablet will also
gets delayed, and will also attempt to access the hardware while in
.probe(). So the tablet doesn't appear in the dmesg, the user unplug/replug
it to make it appearing... and so on so forth.
Really, this is for the best :)
Signed-off-by: Benjamin Tissoires <[email protected]>
Acked-by: Jason Gerecke <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
When the LED class gets removed, it actually tries to reset the LED.
However, the device being disconnected, the set_report fails.
Previously, the attempt to cut lose this last event was through unsetting
the HID drvdata, but it was not working properly. Simply reset the LED
groups to NULL makes a more efficient solution.
Signed-off-by: Benjamin Tissoires <[email protected]>
Acked-by: Jason Gerecke <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
In the general case, the resources are properly released by devm without
needing to do anything. However, when unplugging the wireless receiver,
the kernel segfaults from time to time while calling devres_release_all().
I think in that case the resources attempt to access hid_get_drvdata(hdev)
which has been set to null while leaving wacom_remove().
Signed-off-by: Benjamin Tissoires <[email protected]>
Acked-by: Jason Gerecke <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- regression fix for generic Wacom devices, from Jason Gerecke
- DMA-on-stack fixes for hid-corsair driver, from Johan Hovold
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: wacom: Fix sibling detection regression
HID: corsair: fix control-transfer error handling
HID: corsair: fix DMA buffers on stack
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull two s390 bug fixes from Martin Schwidefsky:
"Two changes, the first is a fix to add a missing memory clobber to the
inline assembly to load control registers. This has not caused any
issues so far, but who knows what code gcc will generate in future
versions.
The second change is an update for the default configurations. This
includes CONFIG_BUG_ON_DATA_CORRUPTION=y, we want this to be enabled
for s390. The usual approach to debug problems on production systems
is to use crash on a system dump and for us avoiding data corruptions
is priority one"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/ctl_reg: make __ctl_load a full memory barrier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for Xen running in nested virtualization environment"
* tag 'for-linus-4.10-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
partially revert "xen: Remove event channel notification through Xen PCI platform device"
|
|
Commit 345857b ("HID: wacom: generic: Add support for sensor offsets") included
a change to the operation and location of the call to 'wacom_add_shared_data'
in 'wacom_parse_and_register'. The modifications included moving it higher up
so that it would occur before the call to 'wacom_retrieve_hid_descriptor'. This
was done to prevent a crash that would have occured when the report containing
tablet offsets was fed into the driver with 'wacom_hid_report_raw_event'
(specifically: the various 'wacom_wac_*_report' functions were written with the
assumption that they would only be called once tablet setup had completed;
'wacom_wac_pen_report' in particular dereferences 'shared' which wasn't yet
allocated).
Moving the call to 'wacom_add_shared_data' effectively prevented the crash but
also broke the sibiling detection code which assumes that the HID descriptor
has been read and the various device_type flags set.
To fix this situation, we restore the original 'wacom_add_shared_data'
operation and location and instead implement an alternative change that can
also prevent the crash. Specifically, we notice that the report functions
mentioned above expect to be called only for input reports. By adding a check,
we can prevent feature reports (such as the offset report) from
causing trouble.
Fixes: 345857bb49 ("HID: wacom: generic: Add support for sensor offsets")
Signed-off-by: Jason Gerecke <[email protected]>
Tested-by: Ping Cheng <[email protected]>
Reviewed-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Pull UBIFS fixes from Richard Weinberger:
"This contains fixes for UBIFS:
- a long standing issue in UBIFS journal replay code
- fallout from the merge window"
* tag 'upstream-4.10-rc5' of git://git.infradead.org/linux-ubifs:
ubifs: Fix journal replay wrt. xattr nodes
ubifs: remove redundant checks for encryption key
ubifs: allow encryption ioctls in compat mode
ubifs: add CONFIG_BLOCK dependency for encryption
ubifs: fix unencrypted journal write
ubifs: ensure zero err is returned on successful return
|
|
Pull ARM fixes from Russell King:
"A few ARM fixes:
- fix a crash while performing TLB maintanence on early ARM SMP cores
- blacklist Scorpion CPUs for hardware breakpoints
- ARMs asm/types.h has been included as part of the UAPI due to the
way the makefiles work, move it to uapi/asm/types.h to make it
official
- fix up ftrace syscall name matching"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8613/1: Fix the uaccess crash on PB11MPCore
MAINTAINERS: update rmk's entries
ARM: put types.h in uapi
ARM: 8634/1: hw_breakpoint: blacklist Scorpion CPUs
ARM: 8632/1: ftrace: fix syscall name matching
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP hotplug update from Thomas Gleixner:
"This contains a trivial typo fix and an extension to the core code for
dynamically allocating states in the prepare stage.
The extension is necessary right now because we need a proper way to
unbreak LTTNG, which iscurrently non functional due to the removal of
the notifiers. Surely it's out of tree, but it's widely used by
distros.
The simple solution would have been to reserve a state for LTTNG, but
I'm not fond about unused crap in the kernel and the dynamic range,
which we admittedly should have done right away, allows us to remove
quite some of the hardcoded states, i.e. those which have no ordering
requirements. So doing the right thing now is better than having an
smaller intermediate solution which needs to be reworked anyway"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Provide dynamic range for prepare stage
perf/x86/amd/ibs: Fix typo after cleanup state names in cpu/hotplug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix a crash in the ARM-Exynos clocksource driver, triggered by CPU
hotplug operations"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/exynos_mct: Clear interrupt when cpu is shut down
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU fixes from Ingo Molnar:
"This fixes sporadic ACPI related hangs in synchronize_rcu() that were
caused by the ACPI code mistakenly relying on an aspect of RCU that
was neither promised to work nor reliable but which happened to work -
until in v4.9 we changed the RCU implementation, which made the hangs
more prominent.
Since the mis-use of the RCU facility wasn't properly detected and
prevented either, these fixes make the RCU side work reliably instead
of working around the problem in the ACPI code.
Hence the slightly larger diffstat that goes beyond the normal scope
of RCU fixes in -rc kernels"
* 'rcu-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Narrow early boot window of illegal synchronous grace periods
rcu: Remove cond_resched() from Tiny synchronize_sched()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"An Intel PMU driver hotplug fix and three 'perf probe' tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Handle exclusive threadid correctly on CPU hotplug
perf probe: Fix to probe on gcc generated functions in modules
perf probe: Add error checks to offline probe post-processing
perf probe: Fix to show correct locations for events on modules
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fix from Jessica Yu:
- fix out-of-tree module breakage when it supplies its own definitions
of true and false
* tag 'modules-for-v4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
taint/module: Fix problems when out-of-kernel driver defines true or false
|
|
Commit 7fd8329ba502 ("taint/module: Clean up global and module taint
flags handling") used the key words true and false as character members
of a new struct. These names cause problems when out-of-kernel modules
such as VirtualBox include their own definitions of true and false.
Fixes: 7fd8329ba502 ("taint/module: Clean up global and module taint flags handling")
Signed-off-by: Larry Finger <[email protected]>
Cc: Petr Mladek <[email protected]>
Cc: Jessica Yu <[email protected]>
Cc: Rusty Russell <[email protected]>
Reported-by: Valdis Kletnieks <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Acked-by: Rusty Russell <[email protected]>
Signed-off-by: Jessica Yu <[email protected]>
|
|
Pull networking fixes from David Miller:
1) Handle multicast packets properly in fast-RX path of mac80211, from
Johannes Berg.
2) Because of a logic bug, the user can't actually force SW
checksumming on r8152 devices. This makes diagnosis of hw
checksumming bugs really annoying. Fix from Hayes Wang.
3) VXLAN route lookup does not take the source and destination ports
into account, which means IPSEC policies cannot be matched properly.
Fix from Martynas Pumputis.
4) Do proper RCU locking in netvsc callbacks, from Stephen Hemminger.
5) Fix SKB leaks in mlxsw driver, from Arkadi Sharshevsky.
6) If lwtunnel_fill_encap() fails, we do not abort the netlink message
construction properly in fib_dump_info(), from David Ahern.
7) Do not use kernel stack for DMA buffers in atusb driver, from Stefan
Schmidt.
8) Openvswitch conntack actions need to maintain a correct checksum,
fix from Lance Richardson.
9) ax25_disconnect() is missing a check for ax25->sk being NULL, in
fact it already checks this, but not in all of the necessary spots.
Fix from Basil Gunn.
10) Action GET operations in the packet scheduler can erroneously bump
the reference count of the entry, making it unreleasable. Fix from
Jamal Hadi Salim. Jamal gives a great set of example command lines
that trigger this in the commit message.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
net sched actions: fix refcnt when GETing of action after bind
net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOV
net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitions
net/mlx4_core: Fix racy CQ (Completion Queue) free
net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registered
net/mlx5e: Fix a -Wmaybe-uninitialized warning
ax25: Fix segfault after sock connection timeout
bpf: rework prog_digest into prog_tag
tipc: allocate user memory with GFP_KERNEL flag
net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface types
ip6_tunnel: Account for tunnel header in tunnel MTU
mld: do not remove mld souce list info when set link down
be2net: fix MAC addr setting on privileged BE3 VFs
be2net: don't delete MAC on close on unprivileged BE3 VFs
be2net: fix status check in be_cmd_pmac_add()
cpmac: remove hopeless #warning
ravb: do not use zero-length alignment DMA descriptor
mlx4: do not call napi_schedule() without care
openvswitch: maintain correct checksum state in conntrack actions
tcp: fix tcp_fastopen unaligned access complaints on sparc
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb fix from Konrad Rzeszutek Wilk:
"A tiny fix to make sure that page-sized mappings are page-aligned (and
not say straddle two pages). This is important for some drivers (such
as NVME)"
* 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: ensure that page-sized mappings are page-aligned
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- fix regressions detecting HS/HS DDR eMMC cards related to CMD6
MMC host:
- mmc: mxs-mmc: Fix additional cycles after transmission stop
- sdhci-acpi: Only powered up enabled acpi child devices
- meson: avoid possible NULL dereference"
* tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Restore parts of the polling policy when switch to HS/HS DDR
mmc: mxs-mmc: Fix additional cycles after transmission stop
mmc: sdhci-acpi: Only powered up enabled acpi child devices
MMC: meson: avoid possible NULL dereference
|
|
Pull MTD fixes from Brian Norris:
"Just NAND updates from Boris:
- avoid compiling xway NAND controller driver as a module (which
didn't work)
- fix tango NAND DT binding and make sure the controller is in a
clean state at probe time
- add dependency on HAS_IOMEM to the oxnas NAND driver
- fix irq number validity check in the lpc32xx driver"
* tag 'for-linus-20170116' of git://git.infradead.org/linux-mtd:
mtd: nand: lpc32xx: fix invalid error handling of a requested irq
mtd: nand: tango: Reset pbus to raw mode in probe
mtd: nand: tango: Update DT binding description
mtd: nand: oxnas_nand: fix build errors on arch/um, require HAS_IOMEM
mtd: nand: xway: fix build because of module functions
mtd: nand: xway: disable module support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull 'perf probe' fixes from Arnaldo Carvalho de Melo <[email protected]>
- Show correct locations for 'perf probe' on modules (Masami Hiramatsu)
- Correctly handle 'perf probe's on GCC generated functions in modules (Masami Hiramatsu)
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
When replaying the journal it can happen that a journal entry points to
a garbage collected node.
This is the case when a power-cut occurred between a garbage collect run
and a commit. In such a case nodes have to be read using the failable
read functions to detect whether the found node matches what we expect.
One corner case was forgotten, when the journal contains an entry to
remove an inode all xattrs have to be removed too. UBIFS models xattr
like directory entries, so the TNC code iterates over
all xattrs of the inode and removes them too. This code re-uses the
functions for walking directories and calls ubifs_tnc_next_ent().
ubifs_tnc_next_ent() expects to be used only after the journal and
aborts when a node does not match the expected result. This behavior can
render an UBIFS volume unmountable after a power-cut when xattrs are
used.
Fix this issue by using failable read functions in ubifs_tnc_next_ent()
too when replaying the journal.
Cc: [email protected]
Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system")
Reported-by: Rock Lee <[email protected]>
Reviewed-by: David Gstir <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
In several places, ubifs checked for an encryption key before creating a
file in an encrypted directory. This was redundant with
fscrypt_setup_filename() or ubifs_new_inode(), and in the case of
ubifs_link() it broke linking to special files. So remove the extra
checks.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
The ubifs encryption ioctls did not work when called by a 32-bit program
on a 64-bit kernel. Since 'struct fscrypt_policy' is not affected by
the word size, ubifs just needs to allow these ioctls through, like what
ext4 and f2fs do.
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
This came up during the v4.10 merge window:
warning: (UBIFS_FS_ENCRYPTION) selects FS_ENCRYPTION which has unmet direct dependencies (BLOCK)
fs/crypto/crypto.c: In function 'fscrypt_zeroout_range':
fs/crypto/crypto.c:355:9: error: implicit declaration of function 'bio_alloc';did you mean 'd_alloc'? [-Werror=implicit-function-declaration]
bio = bio_alloc(GFP_NOWAIT, 1);
The easiest way out is to limit UBIFS_FS_ENCRYPTION to configurations
that also enable BLOCK.
Fixes: d475a507457b ("ubifs: Add skeleton for fscrypto")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
Without this, I get the following on reboot:
UBIFS error (ubi1:0 pid 703): ubifs_load_znode: bad target node (type 1) length (8240)
UBIFS error (ubi1:0 pid 703): ubifs_load_znode: have to be in range of 48-4144
UBIFS error (ubi1:0 pid 703): ubifs_load_znode: bad indexing node at LEB 13:11080, error 5
magic 0x6101831
crc 0xb1cb246f
node_type 9 (indexing node)
group_type 0 (no node group)
sqnum 546
len 128
child_cnt 5
level 0
Branches:
0: LEB 14:72088 len 161 key (133, inode)
1: LEB 14:81120 len 160 key (134, inode)
2: LEB 20:26624 len 8240 key (134, data, 0)
3: LEB 14:81280 len 160 key (135, inode)
4: LEB 20:34864 len 8240 key (135, data, 0)
UBIFS warning (ubi1:0 pid 703): ubifs_ro_mode.part.0: switched to read-only mode, error -22
CPU: 0 PID: 703 Comm: mount Not tainted 4.9.0-next-20161213+ #1197
Hardware name: Atmel SAMA5
[<c010d2ac>] (unwind_backtrace) from [<c010b250>] (show_stack+0x10/0x14)
[<c010b250>] (show_stack) from [<c024df94>] (ubifs_jnl_update+0x2e8/0x614)
[<c024df94>] (ubifs_jnl_update) from [<c0254bf8>] (ubifs_mkdir+0x160/0x204)
[<c0254bf8>] (ubifs_mkdir) from [<c01a6030>] (vfs_mkdir+0xb0/0x104)
[<c01a6030>] (vfs_mkdir) from [<c0286070>] (ovl_create_real+0x118/0x248)
[<c0286070>] (ovl_create_real) from [<c0283ed4>] (ovl_fill_super+0x994/0xaf4)
[<c0283ed4>] (ovl_fill_super) from [<c019c394>] (mount_nodev+0x44/0x9c)
[<c019c394>] (mount_nodev) from [<c019c4ac>] (mount_fs+0x14/0xa4)
[<c019c4ac>] (mount_fs) from [<c01b5338>] (vfs_kern_mount+0x4c/0xd4)
[<c01b5338>] (vfs_kern_mount) from [<c01b6b80>] (do_mount+0x154/0xac8)
[<c01b6b80>] (do_mount) from [<c01b782c>] (SyS_mount+0x74/0x9c)
[<c01b782c>] (SyS_mount) from [<c0107f80>] (ret_fast_syscall+0x0/0x3c)
UBIFS error (ubi1:0 pid 703): ubifs_mkdir: cannot create directory, error -22
overlayfs: failed to create directory /mnt/ovl/work/work (errno: 22); mounting read-only
Fixes: 7799953b34d1 ("ubifs: Implement encrypt/decrypt for all IO")
Signed-off-by: Peter Rosin <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
err is no longer being set on a successful return path, causing
a garbage value being returned. Fix this by setting err to zero
for the successful return path.
Found with static analysis by CoverityScan, CID 1389473
Fixes: 7799953b34d18 ("ubifs: Implement encrypt/decrypt for all IO")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
The CPU hotplug function intel_pmu_cpu_starting() sets
cpu_hw_events.excl_thread_id unconditionally to 1 when the shared exclusive
counters data structure is already availabe for the sibling thread.
This works during the boot process because the first sibling gets threadid
0 assigned and the second sibling which shares the data structure gets 1.
But when the first thread of the core is offlined and onlined again it
shares the data structure with the second thread and gets exclusive thread
id 1 assigned as well.
Prevent this by checking the threadid of the already online thread.
[ tglx: Rewrote changelog ]
Signed-off-by: Zhou Chengming <[email protected]>
Cc: NuoHan Qiao <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
--- ---
arch/x86/events/intel/core.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
|
|
When a CPU goes offline a potentially pending timer interrupt is not
cleared. When the CPU comes online again then the pending interrupt is
delivered before the per cpu clockevent device is initialized. As a
consequence the tick interrupt handler dereferences a NULL pointer.
[ 51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040
[ 51.289348] task: ee942d00 task.stack: ee960000
[ 51.293861] PC is at tick_periodic+0x38/0xb0
[ 51.298102] LR is at tick_handle_periodic+0x1c/0x90
Clear the pending interrupt in the cpu dying path.
Fixes: 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier")
Reported-by: Seung-Woo Kim <[email protected]>
Signed-off-by: Joonyoung Shim <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
|
|
Demonstrating the issue:
.. add a drop action
$sudo $TC actions add action drop index 10
.. retrieve it
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 2 bind 0 installed 29 sec used 29 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
... bug 1 above: reference is two.
Reference is actually 1 but we forget to subtract 1.
... do a GET again and we see the same issue
try a few times and nothing changes
~$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 2 bind 0 installed 31 sec used 31 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
... lets try to bind the action to a filter..
$ sudo $TC qdisc add dev lo ingress
$ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10
... and now a few GETs:
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 3 bind 1 installed 204 sec used 204 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 4 bind 1 installed 206 sec used 206 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 5 bind 1 installed 235 sec used 235 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
.... as can be observed the reference count keeps going up.
After the fix
$ sudo $TC actions add action drop index 10
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 1 bind 0 installed 4 sec used 4 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 1 bind 0 installed 6 sec used 6 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
$ sudo $TC qdisc add dev lo ingress
$ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \
u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 2 bind 1 installed 32 sec used 32 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
$ sudo $TC -s actions get action gact index 10
action order 1: gact action drop
random type none pass val 0
index 10 ref 2 bind 1 installed 33 sec used 33 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Fixes: aecc5cefc389 ("net sched actions: fix GETing actions")
Signed-off-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull NFS client bugfixes from Trond Myklebust:
- fix invalid fget()/fput() calls when doing file locking
- fix multiple directory cache invalidation issues due to the client
failing to recognise that the directory wasn't changed
- fix client recovery when server reboots multiple times
* tag 'nfs-for-4.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Fix client recovery when server reboots multiple times
NFSv4: update_changeattr should update the attribute timestamp
NFSv4: Don't call update_changeattr() unless the unlink is successful
NFSv4: Don't apply change_info4 twice on rename within a directory
NFSv4: Call update_changeattr() from _nfs4_proc_open only if a file was created
nfs: Don't take a reference on fl->fl_file for LOCK operation
|
|
Tariq Toukan says:
====================
mlx4 core fixes
This patchset contains bug fixes from Jack to the mlx4 Core driver.
Patch 1 solves a race in the flow of CQ free.
Patch 2 moves some qp context flags update to the correct qp transition.
Patch 3 eliminates warnings from the path of SRQ_LIMIT that flood the message log,
and keeps them only in the path of SRQ_CATAS_ERROR.
Series generated against net commit:
1a717fcf8bbe Merge tag 'mac80211-for-davem-2017-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's
message log when (correct, normally operating) apps use SRQ LIMIT events
as a trigger to post WQEs to SRQs.
Add more information to the existing debug printout for SRQ_LIMIT, and
output the warning messages only for the SRQ CATAS ERROR event.
Fixes: acba2420f9d2 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs")
Fixes: e0debf9cb50d ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level")
Signed-off-by: Jack Morgenstein <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
transitions
Save the qp context flags byte containing the flag disabling vlan stripping
in the RESET to INIT qp transition, rather than in the INIT to RTR
transition. Per the firmware spec, the flags in this byte are active
in the RESET to INIT transition.
As a result of saving the flags in the incorrect qp transition, when
switching dynamically from VGT to VST and back to VGT, the vlan
remained stripped (as is required for VST) and did not return to
not-stripped (as is required for VGT).
Fixes: f0f829bf42cd ("net/mlx4_core: Add immediate activate for VGT->VST->VGT")
Signed-off-by: Jack Morgenstein <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In function mlx4_cq_completion() and mlx4_cq_event(), the
radix_tree_lookup requires a rcu_read_lock.
This is mandatory: if another core frees the CQ, it could
run the radix_tree_node_rcu_free() call_rcu() callback while
its being used by the radix tree lookup function.
Additionally, in function mlx4_cq_event(), since we are adding
the rcu lock around the radix-tree lookup, we no longer need to take
the spinlock. Also, the synchronize_irq() call for the async event
eliminates the need for incrementing the cq reference count in
mlx4_cq_event().
Other changes:
1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock:
we no longer take this spinlock in the interrupt context.
The spinlock here, therefore, simply protects against different
threads simultaneously invoking mlx4_cq_free() for different cq's.
2. In function mlx4_cq_free(), we move the radix tree delete to before
the synchronize_irq() calls. This guarantees that we will not
access this cq during any subsequent interrupts, and therefore can
safely free the CQ after the synchronize_irq calls. The rcu_read_lock
in the interrupt handlers only needs to protect against corrupting the
radix tree; the interrupt handlers may access the cq outside the
rcu_read_lock due to the synchronize_irq calls which protect against
premature freeing of the cq.
3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg.
4. We leave the cq reference count mechanism in place, because it is
still needed for the cq completion tasklet mechanism.
Fixes: 6d90aa5cf17b ("net/mlx4_core: Make sure there are no pending async events when freeing CQ")
Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Signed-off-by: Jack Morgenstein <[email protected]>
Signed-off-by: Matan Barak <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Don't use netdev_info and friends before the net_device is registered.
This avoids ugly messages like
"meson8b-dwmac c9410000.ethernet (unnamed net_device) (uninitialized):
Enable RX Mitigation via HW Watchdog Timer"
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As found by Olof's build bot, we gain a harmless warning about a
potential uninitialized variable reference in mlx5:
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'parse_tc_fdb_actions':
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:769:13: warning: 'out_dev' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:811:21: note: 'out_dev' was declared here
This was introduced through the addition of an 'IS_ERR/PTR_ERR' pair
that gcc is unfortunately unable to completely figure out.
The problem being gcc cannot tell that if(IS_ERR()) in
mlx5e_route_lookup_ipv4() is equivalent to checking if(err) later,
so it assumes that 'out_dev' is used after the 'return PTR_ERR(rt)'.
The PTR_ERR_OR_ZERO() case by comparison is fairly easy to detect
by gcc, so it can't get that wrong, so it no longer warns.
Hadar Hen Zion already attempted to fix the warning earlier by adding fake
initializations, but that ended up not fully addressing all warnings, so
I'm reverting it now that it is no longer needed.
Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.10-rc3-98-gcff3b2c/
Fixes: a42485eb0ee4 ("net/mlx5e: TC ipv4 tunnel encap offload error flow fixes")
Fixes: a757d108dc1a ("net/mlx5e: Fix kbuild warnings for uninitialized parameters")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Or Gerlitz <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The ax.25 socket connection timed out & the sock struct has been
previously taken down ie. sock struct is now a NULL pointer. Checking
the sock_flag causes the segfault. Check if the socket struct pointer
is NULL before checking sock_flag. This segfault is seen in
timed out netrom connections.
Please submit to -stable.
Signed-off-by: Basil Gunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit 7bd509e311f4 ("bpf: add prog_digest and expose it via
fdinfo/netlink") was recently discussed, partially due to
admittedly suboptimal name of "prog_digest" in combination
with sha1 hash usage, thus inevitably and rightfully concerns
about its security in terms of collision resistance were
raised with regards to use-cases.
The intended use cases are for debugging resp. introspection
only for providing a stable "tag" over the instruction sequence
that both kernel and user space can calculate independently.
It's not usable at all for making a security relevant decision.
So collisions where two different instruction sequences generate
the same tag can happen, but ideally at a rather low rate. The
"tag" will be dumped in hex and is short enough to introspect
in tracepoints or kallsyms output along with other data such
as stack trace, etc. Thus, this patch performs a rename into
prog_tag and truncates the tag to a short output (64 bits) to
make it obvious it's not collision-free.
Should in future a hash or facility be needed with a security
relevant focus, then we can think about requirements, constraints,
etc that would fit to that situation. For now, rework the exposed
parts for the current use cases as long as nothing has been
released yet. Tested on x86_64 and s390x.
Fixes: 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink")
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix to probe on gcc generated functions on modules. Since
probing on a module is based on its symbol name, it should
be adjusted on actual symbols.
E.g. without this fix, perf probe shows probe definition
on non-exist symbol as below.
$ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -F in_range*
in_range.isra.12
$ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range
p:probe/in_range nf_nat:in_range+0
With this fix, perf probe correctly shows a probe on
gcc-generated symbol.
$ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range
p:probe/in_range nf_nat:in_range.isra.12+0
This also fixes same problem on online module as below.
$ perf probe -m i915 -D assert_plane
p:probe/assert_plane i915:assert_plane.constprop.134+0
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/148411450673.9978.14905987549651656075.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add error check codes on post processing and improve it for offline
probe events as:
- post processing fails if no matched symbol found in map(-ENOENT)
or strdup() failed(-ENOMEM).
- Even if the symbol name is the same, it updates symbol address
and offset.
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lkml.kernel.org/r/148411443738.9978.4617979132625405545.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Until now, we allocate memory always with GFP_ATOMIC flag.
When the system is under memory pressure and a user tries to send,
the send fails due to low memory. However, the user application
can wait for free memory if we allocate it using GFP_KERNEL flag.
In this commit, we use allocate memory with GFP_KERNEL for all user
allocation.
Reported-by: Rune Torgersen <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Parthasarathy Bhuvaragan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently dp83867 driver returns error if phy interface type
PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal
delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID.
Fix this by checking also the interface type if a particular delay
value is missing in the phy dt bindings. Also update the DT document
accordingly.
Signed-off-by: Murali Karicheri <[email protected]>
Signed-off-by: Sekhar Nori <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|