aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-12-05drm/ttm: swap consecutive allocated cached pages v3Christian König1-1/+6
When we detect consecutive allocation of pages swap them to avoid accidentally freeing them as huge page. v2: use swap v3: check if it's really the first allocated page Signed-off-by: Christian König <[email protected]> Reviewed-by: Roger He <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-12-05drm/ttm: roundup the shrink request to prevent skip huge poolRoger He1-5/+7
e.g. shrink reqeust is less than 512, the logic will skip huge pool Reviewed-by: Chunming Zhou <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-12-05drm/ttm: add page order support in ttm_pages_putRoger He1-8/+18
Reviewed-by: Chunming Zhou <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-12-05drm/ttm: add set_pages_wb for handling page order more than zeroRoger He1-0/+11
Reviewed-by: Chunming Zhou <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-12-05drm/ttm: add page order in page poolRoger He1-11/+27
to indicate page order for each element in the pool Reviewed-by: Christian König <[email protected]> Signed-off-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-12-05drm/ttm: use NUM_PAGES_TO_ALLOC alwaysRoger He1-2/+1
Reviewed-by: Christian König <[email protected]> Signed-off-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-12-05Merge tag 'scsi-fixes' of ↵Linus Torvalds9-52/+43
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A bunch of fixes for aacraid, a set of coherency fixes that only affect non-coherent platforms and one coccinelle detected null check after use" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: align sata_device's rps_resp on a cacheline scsi: use dma_get_cache_alignment() as minimum DMA alignment scsi: dma-mapping: always provide dma_get_cache_alignment scsi: ufs: ufshcd: fix potential NULL pointer dereference in ufshcd_config_vreg scsi: aacraid: Prevent crash in case of free interrupt during scsi EH path scsi: aacraid: Perform initialization reset only once scsi: aacraid: Check for PCI state of device in a generic way
2017-12-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds13-78/+134
Pull rdma fixes from Jason Gunthorpe: "Here is the first rc pull request for RDMA. This includes an important core fix for a regression in iWarp if SELinux is enabled, a fix for a compilation regression introduced in this merge window, and one obscure kconfig combination that oops's the kernel. For drivers, we have hns fixes needed to make their devices work on certain ARM IOMMU configurations, a stack data leak for hfi1, and various testing discovered -rc bug fixes for i40iw. This cycle we pushed back on the driver maintainers to have better commit messages for -rc material" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/core: Only enforce security for InfiniBand RDMA/hns: Get rid of page operation after dma_alloc_coherent RDMA/hns: Get rid of virt_to_page and vmap calls after dma_alloc_coherent RDMA/hns: Fix the issue of IOVA not page continuous in hip08 IB/core: Init subsys if compiled to vmlinuz-core RDMA/cma: Make sure that PSN is not over max allowed i40iw: Notify user of established connection after QP in RTS i40iw: Move MPA request event for loopback after connect i40iw: Correct ARP index mask i40iw: Do not free sqbuf when event is I40IW_TIMER_TYPE_CLOSE i40iw: Allocate a sdbuf per CQP WQE IB: INFINIBAND should depend on HAS_DMA IB/hfi1: Initialize bth1 in 16B rc ack builder
2017-12-05Merge tag 'char-misc-4.15-rc3' of ↵Linus Torvalds7-84/+95
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are some small misc driver fixes for 4.15-rc3 to resolve reported issues. Specifically these are: - binder fix for a memory leak - vpd driver fixes for a number of reported problems - hyperv driver fix for memory accesses where it shouldn't be. All of these have been in linux-next for a while. There's also one more MAINTAINERS file update that came in today to get the Android developer's emails correct, which is also in this pull request, that was not in linux-next, but should not be an issue" * tag 'char-misc-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: MAINTAINERS: update Android driver maintainers. firmware: vpd: Fix platform driver and device registration/unregistration firmware: vpd: Tie firmware kobject to device lifetime firmware: vpd: Destroy vpd sections in remove function hv: kvp: Avoid reading past allocated blocks from KVP file Drivers: hv: vmbus: Fix a rescind issue ANDROID: binder: fix transaction leak.
2017-12-05Merge tag 'driver-core-4.15-rc3' of ↵Linus Torvalds3-17/+20
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are 3 small fixes for some reported issues: - a debugfs build error that lots of people have reported - a Kconfig help text cleanup now that the firmware is not in the kernel tree - an ISA bus bug fix for a reported issue that has been there since 2.6.18. All of these have been in linux-next with no reported issues" * tag 'driver-core-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware: cleanup FIRMWARE_IN_KERNEL message isa: Prevent NULL dereference in isa_bus driver callbacks debugfs: fix debugfs_real_fops() build error
2017-12-05Merge tag 'staging-4.15-rc3' of ↵Linus Torvalds10-31/+77
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and iio driver fixes from Greg KH: "Here are a number of small staging and iio driver fixes for reported issues for 4.15-rc3. Nothing major here, the majority is IIO issues, like normal, but there are also some small bugfixes for a few staging drivers as well. Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: stm32: fix adc/trigger link error iio: health: max30102: Temperature should be in milli Celsius iio: fix kernel-doc build errors iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and REG13 iio: adc: meson-saradc: initialize the bandgap correctly on older SoCs iio: adc: meson-saradc: fix the bit_idx of the adc_en clock iio: proximity: sx9500: Assign interrupt from GpioIo() iio: adc: cpcap: fix incorrect validation staging: octeon-usb: use __delay() instead of cvmx_wait() staging: rtl8188eu: Fix incorrect response to SIOCGIWESSID staging: ccree: fix leak of import() after init() staging: comedi: ni_atmio: fix license warning.
2017-12-05Merge tag 'tty-4.15-rc3' of ↵Linus Torvalds6-11/+57
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small serdev and serial fixes for 4.15-rc3. They resolve some reported problems: - a number of serdev fixes to resolve crashes - MIPS build fixes for their serial port - a new 8250 device id All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: MIPS: Add custom serial.h with BASE_BAUD override for generic kernel serdev: ttyport: fix tty locking in close serdev: ttyport: fix NULL-deref on hangup serdev: fix receive_buf return value when no callback serdev: ttyport: add missing receive_buf sanity checks serial: 8250_early: Only set divisor if valid clk & baud serial: 8250_pci: Add Amazon PCI serial device ID
2017-12-05Merge tag 'kvm-arm-fixes-for-v4.15-1' of ↵Radim Krčmář17-79/+144
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM Fixes for v4.15. Fixes: - A number of issues in the vgic discovered using SMATCH - A bit one-off calculation in out stage base address mask (32-bit and 64-bit) - Fixes to single-step debugging instructions that trap for other reasons such as MMMIO aborts - Printing unavailable hyp mode as error - Potential spinlock deadlock in the vgic - Avoid calling vgic vcpu free more than once - Broken bit calculation for big endian systems
2017-12-05Merge tag 'usb-4.15-rc3' of ↵Linus Torvalds24-40/+169
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a few minor USB fixes for 4.15-rc3. The largest here is the Kconfig text and configuration changes for the USB TypeC build options that you reported during the -rc1 merge window. The others are all just small fixes for reported issues, as well as some new device ids. The most "interesting" of anything here is the usbip fixes as it seems lots of people are starting to pay attention to that driver at the moment. These fixes should resolve all of the reported problems as of now. Of course there are the usual xhci and gadget fixes as well, can't go a pull request without those... All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) usb: xhci: fix panic in xhci_free_virt_devices_depth_first xhci: Don't show incorrect WARN message about events for empty rings usbip: fix usbip attach to find a port that matches the requested speed usbip: Fix USB device hang due to wrong enabling of scatter-gather uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub usb: build drivers/usb/common/ when USB_SUPPORT is set usb: hub: Cycle HUB power when initialization fails USB: core: Add type-specific length check of BOS descriptors usb: host: fix incorrect updating of offset USB: ulpi: fix bus-node lookup USB: usbfs: Filter flags passed in from user space usb: add user selectable option for the whole USB Type-C Support usb: f_fs: Force Reserved1=1 in OS_DESC_EXT_COMPAT usb: gadget: core: Fix ->udc_set_speed() speed handling usb: gadget: allow to enable legacy drivers without USB_ETH usb: gadget: udc: renesas_usb3: fix number of the pipes usb: gadget: don't dereference g until after it has been null checked USB: serial: usb_debug: add new USB device id usb: bdc: fix platform_no_drv_owner.cocci warnings ...
2017-12-05gianfar: fix a flooded alignment reports because of padding issue.Zumeng Chen1-2/+4
According to LS1021A RM, the value of PAL can be set so that the start of the IP header in the receive data buffer is aligned to a 32-bit boundary. Normally, setting PAL = 2 provides minimal padding to ensure such alignment of the IP header. However every incoming packet's 8-byte time stamp will be inserted into the packet data buffer as padding alignment bytes when hardware time stamping is enabled. So we set the padding 8+2 here to avoid the flooded alignment faults: root@128:~# cat /proc/cpu/alignment User: 0 System: 17539 (inet_gro_receive+0x114/0x2c0) Skipped: 0 Half: 0 Word: 0 DWord: 0 Multi: 17539 User faults: 2 (fixup) Also shown when exception report enablement CPU: 0 PID: 161 Comm: irq/66-eth1_g0_ Not tainted 4.1.21-rt13-WR8.0.0.0_preempt-rt #16 Hardware name: Freescale LS1021A [<8001b420>] (unwind_backtrace) from [<8001476c>] (show_stack+0x20/0x24) [<8001476c>] (show_stack) from [<807cfb48>] (dump_stack+0x94/0xac) [<807cfb48>] (dump_stack) from [<80025d70>] (do_alignment+0x720/0x958) [<80025d70>] (do_alignment) from [<80009224>] (do_DataAbort+0x40/0xbc) [<80009224>] (do_DataAbort) from [<80015398>] (__dabt_svc+0x38/0x60) Exception stack(0x86ad1cc0 to 0x86ad1d08) 1cc0: f9b3e080 86b3d072 2d78d287 00000000 866816c0 86b3d05e 86e785d0 00000000 1ce0: 00000011 0000000e 80840ab0 86ad1d3c 86ad1d08 86ad1d08 806d7fc0 806d806c 1d00: 40070013 ffffffff [<80015398>] (__dabt_svc) from [<806d806c>] (inet_gro_receive+0x114/0x2c0) [<806d806c>] (inet_gro_receive) from [<80660eec>] (dev_gro_receive+0x21c/0x3c0) [<80660eec>] (dev_gro_receive) from [<8066133c>] (napi_gro_receive+0x44/0x17c) [<8066133c>] (napi_gro_receive) from [<804f0538>] (gfar_clean_rx_ring+0x39c/0x7d4) [<804f0538>] (gfar_clean_rx_ring) from [<804f0bf4>] (gfar_poll_rx_sq+0x58/0xe0) [<804f0bf4>] (gfar_poll_rx_sq) from [<80660b10>] (net_rx_action+0x27c/0x43c) [<80660b10>] (net_rx_action) from [<80033638>] (do_current_softirqs+0x1e0/0x3dc) [<80033638>] (do_current_softirqs) from [<800338c4>] (__local_bh_enable+0x90/0xa8) [<800338c4>] (__local_bh_enable) from [<8008025c>] (irq_forced_thread_fn+0x70/0x84) [<8008025c>] (irq_forced_thread_fn) from [<800805e8>] (irq_thread+0x16c/0x244) [<800805e8>] (irq_thread) from [<8004e490>] (kthread+0xe8/0x104) [<8004e490>] (kthread) from [<8000fda8>] (ret_from_fork+0x14/0x2c) Signed-off-by: Zumeng Chen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-05Merge tag 'pinctrl-v4.15-2' of ↵Linus Torvalds6-10/+21
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "As with GPIO not much action in pin control. All are driver fixes: - fix the UART2 RTS pin mode on Intel Denverton - fix the direction_output() behaviour on the Armada 37xx - fix the groups selection per-SoC on the Gemini - fix the interrupt pin bank on the Sunxi A80 - fix the UART mux on the Sunxi A64 - disable the strict mode on the Sunxi H5 driver" * tag 'pinctrl-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: Disable strict mode for H5 driver pinctrl: sunxi: Fix A64 UART mux value pinctrl: sunxi: Fix A80 interrupt pin bank pinctrl: gemini: Fix usage of 3512 groups pinctrl: armada-37xx: Fix direction_output() callback behavior pinctrl: denverton: Fix UART2 RTS pin mode
2017-12-05Merge tag 'gpio-v4.15-2' of ↵Linus Torvalds4-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Three small fixes for GPIO. Not much, I'm surprised by the silence in my subsystems. All driver fixes: - fix a crash in the 74x164 driver - fix IRQ banks in the DaVinci driver - fix the vendor prefix in the PCA953x driver" * tag 'gpio-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: fix vendor prefix for PCA9654 gpio: davinci: Assign first bank regs for unbanked case gpio: 74x164: Fix crash during .remove()
2017-12-05Revert "net: core: maybe return -EEXIST in __dev_alloc_name"Johannes Berg1-1/+1
This reverts commit d6f295e9def0; some userspace (in the case we noticed it's wpa_supplicant), is relying on the current error code to determine that a fixed name interface already exists. Reported-by: Jouni Malinen <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-05nfp: fix port stats for mac representorsPieter Jansen van Vuuren1-9/+6
Previously we swapped the tx_packets, tx_bytes and tx_dropped counters with rx_packets, rx_bytes and rx_dropped counters, respectively. This behaviour is correct and expected for VF representors but it should not be swapped for physical port mac representors. Fixes: eadfa4c3be99 ("nfp: add stats and xmit helpers for representors") Signed-off-by: Pieter Jansen van Vuuren <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-05ARM: dts: Fix dm814x missing phy-cells propertyTony Lindgren1-0/+1
We have phy-cells for usb_phy0, but it's missing for usb_phy1 and we get: Warning (phys_property): Missing property '#phy-cells' in node /ocp/l4ls@48000000/control@140000/usb-phy@1b00 or bad phandle (referred from /ocp/usb@47400000/usb@47401800:phys[0]) Signed-off-by: Tony Lindgren <[email protected]>
2017-12-05ARM: dts: Fix elm interrupt compiler warningTony Lindgren1-1/+1
Looks like the interrupt property is missing the controller and level information causing: Warning (interrupts_property): interrupts size is (4), expected multiple of 12 in /ocp/elm@48078000 Signed-off-by: Tony Lindgren <[email protected]>
2017-12-05Revert "tcp: must block bh in __inet_twsk_hashdance()"Eric Dumazet1-3/+3
We had to disable BH _before_ calling __inet_twsk_hashdance() in commit cfac7f836a71 ("tcp/dccp: block bh before arming time_wait timer"). This means we can revert 614bdd4d6e61 ("tcp: must block bh in __inet_twsk_hashdance()"). Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-05remove task and stack pointer printout from oops dumpLinus Torvalds1-3/+0
Geert Uytterhoeven reported a NFS oops, and pointed out that some of the numbers were hashed and useless. We could just turn them from '%p' into '%px', but those numbers are really just legacy, and useless even when not hashed. So just remove them entirely. Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-12-05drm/i915/cnl: Mask previous DDI - PLL mappingJames Ausmus1-0/+1
Without masking out the old value, we can end up pointing the DDI to a disabled PLL, which makes the system fall over. Mask out the previous value before setting the PLL to DDI mapping. This can be observed by running igt/testdisplay with both an eDP and HDMI/DP output active. v2: Add the Bugzilla link Fixes: 555e38d273172 ("drm/i915/cnl: DDI - PLL mapping") Testcase: igt/testdisplay Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103997 Cc: Rodrigo Vivi <[email protected]> Cc: Matt Atwood <[email protected]> Signed-off-by: James Ausmus <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Tested-by: Rodrigo Vivi <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 23a7068ec581fcc6fb61039448632d25987b1fae) Signed-off-by: Joonas Lahtinen <[email protected]>
2017-12-05drm/i915: Fix vblank timestamp/frame counter jumps on gen2Ville Syrjälä1-16/+35
Previously I was under the impression that the scanline counter reads 0 when the pipe is off. Turns out that's not correct, and instead the scanline counter simply stops when the pipe stops, and it retains it's last value until the pipe starts up again, at which point the scanline counter jumps to vblank start. These jumps can cause the timestamp to jump backwards by one frame. Since we use the timestamps to guesstimage also the frame counter value on gen2, that would cause the frame counter to also jump backwards, which leads to a massice difference from the previous value. The end result is that flips/vblank events don't appear to complete as they're stuck waiting for the frame counter to catch up to that massive difference. Fix the problem properly by actually making sure the scanline counter has started to move before we assume that it's safe to enable vblank processing. v2: Less pointless duplication in the code (Chris) Cc: [email protected] Cc: Daniel Vetter <[email protected]> Cc: Chris Wilson <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Fixes: b7792d8b54cc ("drm/i915: Wait for pipe to start before sampling vblank timestamps on gen2") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 8fedd64dabc86d0f31a0d1e152be3aa23c323553) Signed-off-by: Joonas Lahtinen <[email protected]>
2017-12-05drm/i915: Skip switch-to-kernel-context on suspend when wedgedChris Wilson1-9/+11
If the HW is already wedged, attempting to submit a request will generate an -EIO. If we tried this during suspend, we would abort whereas all we want to do is to go sleep and throw away the corrupt state. Fixes: 5ab57c702069 ("drm/i915: Flush logical context image out to memory upon suspend") Testcase: igt/gem_eio/suspend Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: Joonas Lahtinen <[email protected]> Reviewed-by: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit ecf73eb2d27d43b2153bb80671768a06d35521f1) Signed-off-by: Joonas Lahtinen <[email protected]>
2017-12-05MAINTAINERS: update Android driver maintainers.Martijn Coenen1-1/+2
Add Todd Kjos and myself, remove Riley (who no longer works at Google). Signed-off-by: Martijn Coenen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-12-05iwlwifi: mvm: mark MIC stripped MPDUsSara Sharon1-0/+2
When RADA is active, the hardware decrypts the packets and strips off the MIC as it is useless after decryption. Indicate that to mac80211. Cc: [email protected] # 4.13+ [this is needed for the 9000-series HW to work properly] Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-12-05iwlwifi: mvm: enable RX offloading with TKIP and WEPDavid Spinadel2-4/+12
Set the flag that indicates that ICV was stripped on if this option was enabled in the HW. Cc: [email protected] # 4.13+ [this is needed for the 9000-series HW to work properly] Signed-off-by: David Spinadel <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-12-05iwlwifi: mvm: flush queue before deleting ROCJohannes Berg2-2/+24
Before deleting a time event (remain-on-channel instance), flush the queue so that frames cannot get stuck on it. We already flush the AUX STA queues, but a separate station is used for the P2P Device queue. Cc: [email protected] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-12-05iwlwifi: add new cards for 9260 and 22000 seriesIhab Zhaika1-0/+2
add 1 PCI ID for 9260 series and 1 for 22000 series. Cc: [email protected] Signed-off-by: Ihab Zhaika <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-12-05Merge branch 'bpf-fix-broken-uapi-for-pt-regs'Daniel Borkmann47-79/+668
Hendrik Brueckner says: ==================== Perf tool bpf selftests revealed a broken uapi for s390 and arm64. With the BPF_PROG_TYPE_PERF_EVENT program type the bpf_perf_event structure exports the pt_regs structure for all architectures. This fails for s390 and arm64 because pt_regs are not part of the user api and kept in-kernel only. To mitigate the broken uapi, introduce a wrapper that exports pt_regs in an asm-generic way. For arm64, export the exising user_pt_regs structure. For s390, introduce a user_pt_regs structure that exports the beginning of pt_regs. Note that user_pt_regs must export from the beginning of pt_regs as BPF_PROG_TYPE_PERF_EVENT program type is not the only type for running BPF programs. Some more background: For the bpf_perf_event, there is a uapi definition that is passed to the BPF program. For other "probe" points like trace points, kprobes, and uprobes, there is no uapi and the BPF program is always passed pt_regs (which is OK as the BPF program runs in the kernel context). The perf tool can attach BPF programs to all of these "probe" points and, optionally, can create a BPF prologue to access particular arguments (passed as registers). For this, it uses DWARF/CFI information to obtain the register and calls a perf-arch backend function, regs_query_register_offset(). This function returns the index into (user_)pt_regs for a particular register. Then, perf creates a BPF prologue that accesses this register based on the passed stucture from the "probe" point. Part of this series, are also updates to the testing and bpf selftest to deal with asm-specifics. To complete the bpf support in perf, the the regs_query_register_offset function is added for s390 to support BPF prologue creation. Changelog v1 -> v2: - Correct kbuild test bot issues by including asm-generic/bpf_perf_event.h for archictectures that do not have their own asm version. - Added patch to clean-up whitespace and coding style issues in s390 asm/ptrace.h (#4/6) as suggested by Alexei. ==================== Signed-off-by: Daniel Borkmann <[email protected]>
2017-12-05perf s390: add regs_query_register_offset()Hendrik Brueckner3-3/+31
The regs_query_register_offset() helper function converts register name like "%r0" to an offset of a register in user_pt_regs It is required by the BPF prologue generator. The user_pt_regs structure was recently added to "asm/ptrace.h". Hence, update tools/perf/check-headers.sh to keep the header file in sync with kernel changes. Suggested-by: Thomas Richter <[email protected]> Signed-off-by: Hendrik Brueckner <[email protected]> Reviewed-and-tested-by: Thomas Richter <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Heiko Carstens <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2017-12-05selftests/bpf: sync kernel headers and introduce arch support in MakefileHendrik Brueckner6-4/+500
Synchronize the uapi kernel header files which solves the broken uapi export of pt_regs. Because of arch-specific uapi headers, extended the include path in the Makefile. With this change, the test_verifier program compiles and runs successfully on s390. Signed-off-by: Hendrik Brueckner <[email protected]> Reviewed-and-tested-by: Thomas Richter <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Shuah Khan <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2017-12-05s390/uapi: correct whitespace & coding style in asm/ptrace.hHendrik Brueckner1-66/+52
Correct whitespace and coding style issues in the s390 asm/ptrace.h uapi header file. This is preparatory work to copy it to the tools/ directory for inclusion by selftests and perf. Signed-off-by: Hendrik Brueckner <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2017-12-05arm64/bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program typeHendrik Brueckner2-0/+11
Correct the broken uapi for the BPF_PROG_TYPE_PERF_EVENT program type by exporting the user_pt_regs structure instead of the pt_regs structure that is in-kernel only. Signed-off-by: Hendrik Brueckner <[email protected]> Reviewed-by: Thomas Richter <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Cc: Will Deacon <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2017-12-05s390/bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program typeHendrik Brueckner4-3/+29
To mitigate and correct the broken uapi for the BPF_PROG_TYPE_PERF_EVENT program type, introduce a user_pt_regs structure (similar to arm64) that exports parts from the beginnig of the pt_regs structure. The export must start with the beginning of the pt_regs structure because to correctly calculate BPF prologues for perf (regs_query_register_offset()). For BPF_PROG_TYPE_PERF_EVENT program types, the BPF program is then passed a user_pt_regs structure. Note: Depending on future changes to the s390 pt_regs structure, consider the user_pt_regs structure to be stable for a particular kernel version only. (Of course, s390 tries to ensure keep it stable as much as possible.) Signed-off-by: Hendrik Brueckner <[email protected]> Reviewed-and-tested-by: Thomas Richter <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Daniel Borkmann <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2017-12-05bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program typeHendrik Brueckner32-5/+47
Commit 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") introduced the bpf_perf_event_data structure which exports the pt_regs structure. This is OK for multiple architectures but fail for s390 and arm64 which do not export pt_regs. Programs using them, for example, the bpf selftest fail to compile on these architectures. For s390, exporting the pt_regs is not an option because s390 wants to allow changes to it. For arm64, there is a user_pt_regs structure that covers parts of the pt_regs structure for use by user space. To solve the broken uapi for s390 and arm64, introduce an abstract type for pt_regs and add an asm/bpf_perf_event.h file that concretes the type. An asm-generic header file covers the architectures that export pt_regs today. The arch-specific enablement for s390 and arm64 follows in separate commits. Reported-by: Thomas Richter <[email protected]> Fixes: 0515e5999a466dfe ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type") Signed-off-by: Hendrik Brueckner <[email protected]> Reviewed-and-tested-by: Thomas Richter <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Daniel Borkmann <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2017-12-05Revert "powerpc: Do not call ppc_md.panic in fadump panic notifier"David Gibson6-22/+45
This reverts commit a3b2cb30f252b21a6f962e0dd107c8b897ca65e4. That commit tried to fix problems with panic on powerpc in certain circumstances, where some output from the generic panic code was being dropped. Unfortunately, it breaks things worse in other circumstances. In particular when running a PAPR guest, it will now attempt to reboot instead of informing the hypervisor (KVM or PowerVM) that the guest has crashed. The crash notification is important to some virtualization management layers. Revert it for now until we can come up with a better solution. Fixes: a3b2cb30f252 ("powerpc: Do not call ppc_md.panic in fadump panic notifier") Cc: [email protected] # v4.14+ Signed-off-by: David Gibson <[email protected]> [mpe: Tweak change log a bit] Signed-off-by: Michael Ellerman <[email protected]>
2017-12-05ALSA: hda/realtek - New codec support for ALC257Kailang Yang1-0/+8
Add new support for ALC257 codec. [ It's supposed to be almost equivalent with other ALC25x variants, just adding another type and id -- tiwai ] Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-12-05s390/mm: fix off-by-one bug in 5-level page table handlingHeiko Carstens1-2/+0
Martin Cermak reported that setting a uprobe doesn't work. Reason for this is that the common uprobes code tries to get an unmapped area at the last possible page within an address space. This broke with commit 1aea9b3f9210 ("s390/mm: implement 5 level pages tables") which introduced an off-by-one bug which prevents to map anything at the last possible page within an address space. The check with the off-by-one bug however can be removed since with commit 8ab867cb0806 ("s390/mm: fix BUG_ON in crst_table_upgrade") the necessary check is done at both call sites. Reported-by: Martin Cermak <[email protected]> Bisected-by: Thomas Richter <[email protected]> Fixes: 1aea9b3f9210 ("s390/mm: implement 5 level pages tables") Cc: <[email protected]> # v4.13+ Reviewed-by: Hendrik Brueckner <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2017-12-05s390: Remove redudant license textMartin Schwidefsky2-10/+0
More files under arch/s390 have been tagged with the SPDX identifier, a few of those files have a GPL license text. Remove the GPL text as it is no longer needed. Signed-off-by: Martin Schwidefsky <[email protected]>
2017-12-05s390: add a few more SPDX identifiersMartin Schwidefsky29-0/+29
Add the correct SPDX license to a few more files under arch/s390 and drivers/s390 which have been missed to far. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. Signed-off-by: Martin Schwidefsky <[email protected]>
2017-12-05s390/dasd: prevent prefix I/O errorStefan Haberland1-6/+10
Prevent that a prefix flag is set based on invalid configuration data. The validity.verify_base flag should only be set for alias devices. Usually the unit address type is either one of base, PAV alias or HyperPAV alias. But in cases where the unit address type is not set or any other value the validity.verify_base flag might be set as well. This would lead to follow on errors. Explicitly check for alias devices and set the validity flag only for them. Signed-off-by: Stefan Haberland <[email protected]> Reviewed-by: Jan Hoeppner <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2017-12-05s390: always save and restore all registers on context switchHeiko Carstens1-14/+13
The switch_to() macro has an optimization to avoid saving and restoring register contents that aren't needed for kernel threads. There is however the possibility that a kernel thread execve's a user space program. In such a case the execve'd process can partially see the contents of the previous process, which shouldn't be allowed. To avoid this, simply always save and restore register contents on context switch. Cc: <[email protected]> # v2.6.37+ Fixes: fdb6d070effba ("switch_to: dont restore/save access & fpu regs for kernel threads") Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2017-12-05s390/dasd: remove 'struct timespec' usageArnd Bergmann2-6/+6
getnstimeofday() and timespec are deprecated since they can overflow on 32-bit architectures. This simply changes to the explicitly typed timespec64 version that doesn't have that problem. It would be nice to also convert to monotonic timestamps and call ktime_get_ts64() rather than ktime_get_real_ts64(), but that would be a user-visible change. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Stefan Haberland <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2017-12-05s390/qdio: restrict target-full handling to IQDIOJulian Wiedmann1-2/+2
The 'no target buffer empty' error code only applies to HiperSockets. If this code is reported on a different queue type, be sure to make the same amount of noise as for any other error code. Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2017-12-05s390/qdio: consider ERROR buffers for inbound-full conditionJulian Wiedmann1-1/+2
In the unlikely case that an ERROR buffer (presented by the HW) consumed the last available slot on the input queue, increment the corresponding statistics counter. Signed-off-by: Julian Wiedmann <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2017-12-05s390/virtio: add BSD license to virtio-ccwMichael S. Tsirkin1-1/+1
The original intent of the virtio header relicensing from 2008 was to make sure anyone can implement compatible devices/drivers. The virtio-ccw was omitted by mistake. We have an ack from the only contributor as well as the maintainer from IBM, so it's not too late to fix that. Make it dual-licensed with GPLv2, as the whole kernel is GPL2. Acked-by: Christian Borntraeger <[email protected]> Acked-by: Cornelia Huck <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2017-12-04Merge tag 'docs-4.15-fixes' of git://git.lwn.net/linuxLinus Torvalds5-16/+13
Pull documentation fixes from Jonathan Corbet: "A handful of documentation fixes. The most significant of these addresses a problem with the new warning mode: it can break the build when confronted with a source file containing malformed kerneldoc comments" * tag 'docs-4.15-fixes' of git://git.lwn.net/linux: Documentation: fix docs build error after source file removed scsi: documentation: Fix case of 'scsi_device' struct mention(s) genericirq.rst: Remove :c:func:`...` in code blocks dmaengine: doc : Fix warning "Title underline too short" while make xmldocs scripts/kernel-doc: Don't fail with status != 0 if error encountered with -none
Powered by cgit, Gruvboxed by Blaster4385.