aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-08MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewerAlyssa Rosenzweig1-0/+2
Add myself as a reviewer for Asahi Linux (Apple M1) patches. I would like to be CC'ed on Asahi Linux patches for review and testing. I am also collecting Asahi Linux patches downstream, rebasing on linux-next periodically, and would like to be notified of what to cherry-pick from lists. Cc: Hector Martin <[email protected]> Cc: Sven Peter <[email protected]> Acked-by: Hector Martin <[email protected]> Acked-by: Sven Peter <[email protected]> Signed-off-by: Alyssa Rosenzweig <[email protected]>
2021-10-07ksmbd: fix oops from fuse driverNamjae Jeon1-11/+6
Marios reported kernel oops from fuse driver when ksmbd call mark_inode_dirty(). This patch directly update ->i_ctime after removing mark_inode_ditry() and notify_change will put inode to dirty list. Cc: Tom Talpey <[email protected]> Cc: Ronnie Sahlberg <[email protected]> Cc: Ralph Böhme <[email protected]> Cc: Hyunchul Lee <[email protected]> Reported-by: Marios Makassikis <[email protected]> Tested-by: Marios Makassikis <[email protected]> Acked-by: Hyunchul Lee <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-10-07ksmbd: fix version mismatch with out of treeNamjae Jeon1-1/+1
Fix version mismatch with out of tree, This updated version will be matched with ksmbd-tools. Cc: Tom Talpey <[email protected]> Cc: Ronnie Sahlberg <[email protected]> Cc: Ralph Böhme <[email protected]> Cc: Steve French <[email protected]> Cc: Hyunchul Lee <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-10-07ksmbd: use buf_data_size instead of recalculation in smb3_decrypt_req()Namjae Jeon1-5/+3
Tom suggested to use buf_data_size that is already calculated, to verify these offsets. Cc: Tom Talpey <[email protected]> Cc: Ronnie Sahlberg <[email protected]> Cc: Ralph Böhme <[email protected]> Suggested-by: Tom Talpey <[email protected]> Acked-by: Hyunchul Lee <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-10-07ksmbd: remove the leftover of smb2.0 dialect supportNamjae Jeon4-34/+12
Although ksmbd doesn't send SMB2.0 support in supported dialect list of smb negotiate response, There is the leftover of smb2.0 dialect. This patch remove it not to support SMB2.0 in ksmbd. Cc: Tom Talpey <[email protected]> Cc: Ronnie Sahlberg <[email protected]> Cc: Ralph Böhme <[email protected]> Cc: Hyunchul Lee <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-10-07ksmbd: check strictly data area in ksmbd_smb2_check_message()Namjae Jeon1-51/+47
When invalid data offset and data length in request, ksmbd_smb2_check_message check strictly and doesn't allow to process such requests. Cc: Tom Talpey <[email protected]> Cc: Ronnie Sahlberg <[email protected]> Cc: Ralph Böhme <[email protected]> Acked-by: Hyunchul Lee <[email protected]> Reviewed-by: Ralph Boehme <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-10-07nvme-pci: Fix abort command idKeith Busch1-1/+1
The request tag is no longer the only component of the command id. Fixes: e7006de6c2380 ("nvme: code command_id with a genctr for use-after-free validation") Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2021-10-07qcom_scm: hide Kconfig symbolArnd Bergmann12-85/+24
Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo <[email protected]> Acked-by: Alex Elder <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2021-10-07firmware: include drivers/firmware/Kconfig unconditionallyArnd Bergmann8-14/+2
Compile-testing drivers that require access to a firmware layer fails when that firmware symbol is unavailable. This happened twice this week: - My proposed to change to rework the QCOM_SCM firmware symbol broke on ppc64 and others. - The cs_dsp firmware patch added device specific firmware loader into drivers/firmware, which broke on the same set of architectures. We should probably do the same thing for other subsystems as well, but fix this one first as this is a dependency for other patches getting merged. Reviewed-by: Bjorn Andersson <[email protected]> Reviewed-by: Charles Keepax <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Bjorn Andersson <[email protected]> Cc: Mark Brown <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: Charles Keepax <[email protected]> Cc: Simon Trimmer <[email protected]> Cc: Michael Ellerman <[email protected]> Reviewed-by: Mark Brown <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2021-10-07ASoC: codec: wcd938x: Add irq config supportSrinivasa Rao Mandadapu1-0/+1
This patch fixes compilation error in wcd98x codec driver. Fixes: 045442228868 ("ASoC: codecs: wcd938x: add audio routing and Kconfig") Signed-off-by: Venkata Prasad Potturu <[email protected]> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]> Reviewed-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-10-07ASoC: DAPM: Fix missing kctl change notificationsTakashi Iwai1-5/+8
The put callback of a kcontrol is supposed to return 1 when the value is changed, and this will be notified to user-space. However, some DAPM kcontrols always return 0 (except for errors), hence the user-space misses the update of a control value. This patch corrects the behavior by properly returning 1 when the value gets updated. Reported-and-tested-by: Hans de Goede <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-10-07ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturationAndy Shevchenko1-13/+5
dev_err_probe() avoids printing into log when the deferred probe is invoked. This is possible when clock provider is pending to appear. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-10-07ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional()Andy Shevchenko1-7/+3
First of all, replace indexed API by plain one since we have index 0. Second, switch to optional variant and drop duplicated code. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-10-07ASoC: Intel: bytcht_es8316: Use temporary variable for struct deviceAndy Shevchenko1-2/+2
Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-10-07ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata()Andy Shevchenko1-3/+2
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-10-07ASoC: wcd938x: Fix jack detection issueSrinivasa Rao Mandadapu1-3/+3
This patch is to fix audio 3.5mm jack detection failure on wcd938x codec based target. Fixes: bcee7ed09b8e (ASoC: codecs: wcd938x: add Multi Button Headset Control support) Signed-off-by: Venkata Prasad Potturu <[email protected]> Signed-off-by: Srinivasa Rao Mandadapu <[email protected]> Reviewed-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-10-07net: prefer socket bound to interface when not in VRFMike Manning4-4/+8
The commit 6da5b0f027a8 ("net: ensure unbound datagram socket to be chosen when not in a VRF") modified compute_score() so that a device match is always made, not just in the case of an l3mdev skb, then increments the score also for unbound sockets. This ensures that sockets bound to an l3mdev are never selected when not in a VRF. But as unbound and bound sockets are now scored equally, this results in the last opened socket being selected if there are matches in the default VRF for an unbound socket and a socket bound to a dev that is not an l3mdev. However, handling prior to this commit was to always select the bound socket in this case. Reinstate this handling by incrementing the score only for bound sockets. The required isolation due to choosing between an unbound socket and a socket bound to an l3mdev remains in place due to the device match always being made. The same approach is taken for compute_score() for stream sockets. Fixes: 6da5b0f027a8 ("net: ensure unbound datagram socket to be chosen when not in a VRF") Fixes: e78190581aff ("net: ensure unbound stream socket to be chosen when not in a VRF") Signed-off-by: Mike Manning <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-07Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski8-21/+38
Daniel Borkmann says: ==================== pull-request: bpf 2021-10-07 We've added 7 non-merge commits during the last 8 day(s) which contain a total of 8 files changed, 38 insertions(+), 21 deletions(-). The main changes are: 1) Fix ARM BPF JIT to preserve caller-saved regs for DIV/MOD JIT-internal helper call, from Johan Almbladh. 2) Fix integer overflow in BPF stack map element size calculation when used with preallocation, from Tatsuhiko Yasumatsu. 3) Fix an AF_UNIX regression due to added BPF sockmap support related to shutdown handling, from Jiang Wang. 4) Fix a segfault in libbpf when generating light skeletons from objects without BTF, from Kumar Kartikeya Dwivedi. 5) Fix a libbpf memory leak in strset to free the actual struct strset itself, from Andrii Nakryiko. 6) Dual-license bpf_insn.h similarly as we did for libbpf and bpftool, with ACKs from all contributors, from Luca Boccassi. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-07tracing: Fix missing osnoise tracer on max_latencyJackie Liu1-7/+4
The compiler warns when the data are actually unused: kernel/trace/trace.c:1712:13: error: ‘trace_create_maxlat_file’ defined but not used [-Werror=unused-function] 1712 | static void trace_create_maxlat_file(struct trace_array *tr, | ^~~~~~~~~~~~~~~~~~~~~~~~ [Why] CONFIG_HWLAT_TRACER=n, CONFIG_TRACER_MAX_TRACE=n, CONFIG_OSNOISE_TRACER=y gcc report warns. [How] Now trace_create_maxlat_file will only take effect when CONFIG_HWLAT_TRACER=y or CONFIG_TRACER_MAX_TRACE=y. In fact, after adding osnoise trace, it also needs to take effect. Link: https://lore.kernel.org/all/[email protected]/ Link: https://lkml.kernel.org/r/[email protected] Fixes: bce29ac9ce0b ("trace: Add osnoise tracer") Cc: Daniel Bristot de Oliveira <[email protected]> Suggested-by: Steven Rostedt <[email protected]> Reviewed-by: Daniel Bristot de Oliveira <[email protected]> Tested-by: Randy Dunlap <[email protected]> # build-tested Signed-off-by: Jackie Liu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-10-07USB: serial: qcserial: add EM9191 QDL supportAleksander Morgado1-0/+1
When the module boots into QDL download mode it exposes the 1199:90d2 ids, which can be mapped to the qcserial driver, and used to run firmware upgrades (e.g. with the qmi-firmware-update program). T: Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90d2 Rev=00.00 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=8W0382004102A109 C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial Signed-off-by: Aleksander Morgado <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-10-07pseries/eeh: Fix the kdump kernel crash during eeh_pseries_initMahesh Salgaonkar1-0/+4
On pseries LPAR when an empty slot is assigned to partition OR in single LPAR mode, kdump kernel crashes during issuing PHB reset. In the kdump scenario, we traverse all PHBs and issue reset using the pe_config_addr of the first child device present under each PHB. However the code assumes that none of the PHB slots can be empty and uses list_first_entry() to get the first child device under the PHB. Since list_first_entry() expects the list to be non-empty, it returns an invalid pci_dn entry and ends up accessing NULL phb pointer under pci_dn->phb causing kdump kernel crash. This patch fixes the below kdump kernel crash by skipping empty slots: audit: initializing netlink subsys (disabled) thermal_sys: Registered thermal governor 'fair_share' thermal_sys: Registered thermal governor 'step_wise' cpuidle: using governor menu pstore: Registered nvram as persistent store backend Issue PHB reset ... audit: type=2000 audit(1631267818.000:1): state=initialized audit_enabled=0 res=1 BUG: Kernel NULL pointer dereference on read at 0x00000268 Faulting instruction address: 0xc000000008101fb0 Oops: Kernel access of bad area, sig: 7 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 7 PID: 1 Comm: swapper/7 Not tainted 5.14.0 #1 NIP: c000000008101fb0 LR: c000000009284ccc CTR: c000000008029d70 REGS: c00000001161b840 TRAP: 0300 Not tainted (5.14.0) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28000224 XER: 20040002 CFAR: c000000008101f0c DAR: 0000000000000268 DSISR: 00080000 IRQMASK: 0 ... NIP pseries_eeh_get_pe_config_addr+0x100/0x1b0 LR __machine_initcall_pseries_eeh_pseries_init+0x2cc/0x350 Call Trace: 0xc00000001161bb80 (unreliable) __machine_initcall_pseries_eeh_pseries_init+0x2cc/0x350 do_one_initcall+0x60/0x2d0 kernel_init_freeable+0x350/0x3f8 kernel_init+0x3c/0x17c ret_from_kernel_thread+0x5c/0x64 Fixes: 5a090f7c363fd ("powerpc/pseries: PCIE PHB reset") Signed-off-by: Mahesh Salgaonkar <[email protected]> [mpe: Tweak wording and trim oops] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/163215558252.413351.8600189949820258982.stgit@jupiter
2021-10-07powerpc/32s: Fix kuap_kernel_restore()Christophe Leroy1-0/+8
At interrupt exit, kuap_kernel_restore() calls kuap_unlock() with the value contained in regs->kuap. However, when regs->kuap contains 0xffffffff it means that KUAP was not unlocked so calling kuap_unlock() is unrelevant and results in jeopardising the contents of kernel space segment registers. So check that regs->kuap doesn't contain KUAP_NONE before calling kuap_unlock(). In the meantime it also means that if KUAP has not been correcly locked back at interrupt exit, it must be locked before continuing. This is done by checking the content of current->thread.kuap which was returned by kuap_get_and_assert_locked() Fixes: 16132529cee5 ("powerpc/32s: Rework Kernel Userspace Access Protection") Reported-by: Stan Johnson <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/0d0c4d0f050a637052287c09ba521bad960a2790.1631715131.git.christophe.leroy@csgroup.eu
2021-10-07powerpc/pseries/msi: Add an empty irq_write_msi_msg() handlerCédric Le Goater1-0/+15
The IPR drivers tests for MSI support at probe time with MSI vector 0 and when done, frees the IRQ with free_irq(). This test was introduced by 95fecd90397e ("ipr: add test for MSI interrupt support") as an improvement of commit 5a9ef25b14d3 ("[SCSI] ipr: add MSI support") because a boot failure was reported on a Bimini PowerPC system: https://lore.kernel.org/r/[email protected] It was finally decided to remove MSI support on Bimini systems in 6eb0ac03899a ("powerpc/maple: Add a quirk to disable MSI for IPR on Bimini"). Linux 5.15-rc1 added MSI domain support to the pseries machine and when free_irq is called() in the driver, msi_domain_deactivate() also is. This resets the MSI table entry of the associate vector by calling __pci_write_msi_msg() with an empty message and breaks any further activation of the same vector. In the case of the IPR driver, it breaks the initialization sequence of the IOA. Introduce an empty irq_write_msi_msg() handler in the MSI domain of the pseries machine to avoid clearing the MSI vector entry. Updating the entry is not strictly necessary since it is initialized by the underlying hypervisor, PowerVM or QEMU/KVM. Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains") Signed-off-by: Cédric Le Goater <[email protected]> Reported-by: Abdul Haleem <[email protected]> Tested-by: Mahesh Salgaonkar <[email protected]> [mpe: Tweak comment wording and formatting slightly] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/David S. Miller3-19/+67
ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2021-10-07 1) Fix a sysbot reported shift-out-of-bounds in xfrm_get_default. From Pavel Skripkin. 2) Fix XFRM_MSG_MAPPING ABI breakage. The new XFRM_MSG_MAPPING messages were accidentally not paced at the end. Fix by Eugene Syromiatnikov. 3) Fix the uapi for the default policy, use explicit field and macros and make it accessible to userland. From Nicolas Dichtel. 4) Fix a missing rcu lock in xfrm_notify_userpolicy(). From Nicolas Dichtel. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-07Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-David S. Miller2-3/+3
queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-06 This series contains updates to i40e and iavf drivers. Jiri Benc expands an error check to prevent infinite loop for i40e. Sylwester prevents freeing of uninitialized IRQ vector to resolve a kernel oops for i40e. Stefan Assmann fixes a double mutex unlock for iavf. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-07powerpc/64s: Fix unrecoverable MCE calling async handler from NMINicholas Piggin3-18/+26
The machine check handler is not considered NMI on 64s. The early handler is the true NMI handler, and then it schedules the machine_check_exception handler to run when interrupts are enabled. This works fine except the case of an unrecoverable MCE, where the true NMI is taken when MSR[RI] is clear, it can not recover, so it calls machine_check_exception directly so something might be done about it. Calling an async handler from NMI context can result in irq state and other things getting corrupted. This can also trigger the BUG at arch/powerpc/include/asm/interrupt.h:168 BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE)); Fix this by making an _async version of the handler which is called in the normal case, and a NMI version that is called for unrecoverable interrupts. Fixes: 2b43dd7653cc ("powerpc/64: enable MSR[EE] in irq replay pt_regs") Signed-off-by: Nicholas Piggin <[email protected]> Tested-by: Cédric Le Goater <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07powerpc/64/interrupt: Reconcile soft-mask state in NMI and fix false BUGNicholas Piggin1-5/+8
If a NMI hits early in an interrupt handler before the irq soft-mask state is reconciled, that can cause a false-positive BUG with a CONFIG_PPC_IRQ_SOFT_MASK_DEBUG assertion. Remove that assertion and instead check the case that if regs->msr has EE clear, then regs->softe should be marked as disabled so the irq state looks correct to NMI handlers, the same as how it's fixed up in the case it was implicit soft-masked. This doesn't fix a known problem -- the change that was fixed by commit 4ec5feec1ad02 ("powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled") was the addition of a warning in the soft-nmi watchdog interrupt which can never actually fire when MSR[EE]=0. However it may be important if NMI handlers grow more code, and it's less surprising to anything using 'regs' - (I tripped over this when working in the area). Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07powerpc/64: warn if local irqs are enabled in NMI or hardirq contextNicholas Piggin1-0/+6
This can help catch bugs such as the one fixed by the previous change to prevent _exception() from enabling irqs. ppc32 could have a similar warning but it has no good config option to debug this stuff (the test may be overkill to add for production kernels). Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07powerpc/traps: do not enable irqs in _exceptionNicholas Piggin1-3/+9
_exception can be called by machine check handlers when the MCE hits user code (e.g., pseries and powernv). This will enable local irqs because, which is a dicey thing to do in NMI or hard irq context. This seemed to worked out okay because a userspace MCE can basically be treated like a synchronous interrupt (after async / imprecise MCEs are filtered out). Since NMI and hard irq handlers have started growing nmi_enter / irq_enter, and more irq state sanity checks, this has started to cause problems (or at least trigger warnings). The Fixes tag to the commit which introduced this rather than try to work out exactly which commit was the first that could possibly cause a problem because that may be difficult to prove. Fixes: 9f2f79e3a3c1 ("powerpc: Disable interrupts in 64-bit kernel FP and vector faults") Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07powerpc/64s: fix program check interrupt emergency stack pathNicholas Piggin1-7/+10
Emergency stack path was jumping into a 3: label inside the __GEN_COMMON_BODY macro for the normal path after it had finished, rather than jumping over it. By a small miracle this is the correct place to build up a new interrupt frame with the existing stack pointer, so things basically worked okay with an added weird looking 700 trap frame on top (which had the wrong ->nip so it didn't decode bug messages either). Fix this by avoiding using numeric labels when jumping over non-trivial macros. Before: LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 88 Comm: sh Not tainted 5.15.0-rc2-00034-ge057cdade6e5 #2637 NIP: 7265677368657265 LR: c00000000006c0c8 CTR: c0000000000097f0 REGS: c0000000fffb3a50 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 00000700 XER: 20040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006c964 c0000000fffb3cf0 c000000001513800 0000000000000000 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80 NIP [7265677368657265] 0x7265677368657265 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10 Call Trace: [c0000000fffb3cf0] [c00000000000bdac] soft_nmi_common+0x13c/0x1d0 (unreliable) --- interrupt: 700 at decrementer_common_virt+0xb8/0x230 NIP: c0000000000098b8 LR: c00000000006c0c8 CTR: c0000000000097f0 REGS: c0000000fffb3d60 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 22424282 XER: 20040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006c964 0000000000002400 c000000001513800 0000000000000000 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80 NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10 --- interrupt: 700 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 6d28218e0cc3c949 ]--- After: ------------[ cut here ]------------ kernel BUG at arch/powerpc/kernel/exceptions-64s.S:491! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 0 PID: 88 Comm: login Not tainted 5.15.0-rc2-00034-ge057cdade6e5-dirty #2638 NIP: c0000000000098b8 LR: c00000000006bf04 CTR: c0000000000097f0 REGS: c0000000fffb3d60 TRAP: 0700 Not tainted MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 24482227 XER: 00040000 CFAR: c0000000000098b0 IRQMASK: 0 GPR00: c00000000006bf04 0000000000002400 c000000001513800 c000000001271868 GPR04: 00000000100f0d29 0000000042000000 0000000000000007 0000000000000009 GPR08: 00000000100f0d29 0000000024482227 0000000000002710 c000000000181b3c GPR12: 9000000000009033 c0000000016b0000 00000000100f0d29 c000000005b22f00 GPR16: 00000000ffff0000 0000000000000001 0000000000000009 00000000100eed90 GPR20: 00000000100eed90 0000000010000000 000000001000a49c 00000000100f1430 GPR24: c000000001271868 0000000002000000 0000000000000215 0000000000000300 GPR28: c000000001271800 0000000042000000 00000000100f0d29 c000000080647860 NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230 LR [c00000000006bf04] ___do_page_fault+0x234/0xb10 Call Trace: Instruction dump: 4182000c 39400001 48000008 894d0932 714a0001 39400008 408225fc 718a4000 7c2a0b78 3821fcf0 41c20008 e82d0910 <0981fcf0> f92101a0 f9610170 f9810178 ---[ end trace a5dbd1f5ea4ccc51 ]--- Fixes: 0a882e28468f4 ("powerpc/64s/exception: remove bad stack branch") Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-07powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000Naveen N. Rao1-1/+1
Special case handling of the smallest 32-bit negative number for BPF_SUB. Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32") Signed-off-by: Naveen N. Rao <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/7135360a0cdf70adedbccf9863128b8daef18764.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
2021-10-07powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_ENDNaveen N. Rao1-1/+1
Suppress emitting zero extend instruction for 64-bit BPF_END_FROM_[L|B]E operation. Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32") Signed-off-by: Naveen N. Rao <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/b4e3c3546121315a8e2059b19a1bda84971816e4.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
2021-10-07powerpc/bpf ppc32: Fix JMP32_JSET_KNaveen N. Rao1-1/+1
'andi' only takes an unsigned 16-bit value. Correct the imm range used when emitting andi. Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32") Signed-off-by: Naveen N. Rao <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/b94489f52831305ec15aca4dd04a3527236be7e8.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
2021-10-07powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operationNaveen N. Rao1-1/+1
Correct the destination register used for ALU32 BPF_ARSH operation. Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32") Signed-off-by: Naveen N. Rao <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/6d24c1f9e79b6f61f5135eaf2ea1e8bcd4dac87b.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
2021-10-07powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPECNaveen N. Rao2-8/+55
Emit similar instruction sequences to commit a048a07d7f4535 ("powerpc/64s: Add support for a store forwarding barrier at kernel entry/exit") when encountering BPF_NOSPEC. Mitigations are enabled depending on what the firmware advertises. In particular, we do not gate these mitigations based on current settings, just like in x86. Due to this, we don't need to take any action if mitigations are enabled or disabled at runtime. Signed-off-by: Naveen N. Rao <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/956570cbc191cd41f8274bed48ee757a86dac62a.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
2021-10-07powerpc/security: Add a helper to query stf_barrier typeNaveen N. Rao2-0/+10
Add a helper to return the stf_barrier type for the current processor. Signed-off-by: Naveen N. Rao <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/3bd5d7f96ea1547991ac2ce3137dc2b220bae285.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
2021-10-07powerpc/bpf: Fix BPF_SUB when imm == 0x80000000Naveen N. Rao1-10/+17
We aren't handling subtraction involving an immediate value of 0x80000000 properly. Fix the same. Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Signed-off-by: Naveen N. Rao <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> [mpe: Fold in fix from Naveen to use imm <= 32768] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/fc4b1276eb10761fd7ce0814c8dd089da2815251.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
2021-10-07USB: serial: option: add Quectel EC200S-CN module supportYu-Tung Chang1-0/+2
Add usb product id of the Quectel EC200S-CN module. usb-devices output for 0x6002: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6002 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=0000 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Signed-off-by: Yu-Tung Chang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-10-07USB: serial: option: add prod. id for Quectel EG91Tomaz Solc1-0/+4
Adding support for Quectel EG91 LTE module. The interface layout is same as for EG95. usb-devices output: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0191 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan Interfaces: 0: Diag 1: GNSS 2: AT-command interface/modem 3: Modem 4: QMI Signed-off-by: Tomaz Solc <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-10-07powerpc/bpf: Fix BPF_MOD when imm == 1Naveen N. Rao1-2/+8
Only ignore the operation if dividing by 1. Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Signed-off-by: Naveen N. Rao <[email protected]> Tested-by: Johan Almbladh <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Acked-by: Song Liu <[email protected]> Acked-by: Johan Almbladh <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/c674ca18c3046885602caebb326213731c675d06.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
2021-10-07powerpc/bpf: Validate branch rangesNaveen N. Rao4-11/+37
Add checks to ensure that we never emit branch instructions with truncated branch offsets. Suggested-by: Michael Ellerman <[email protected]> Signed-off-by: Naveen N. Rao <[email protected]> Tested-by: Johan Almbladh <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Acked-by: Song Liu <[email protected]> Acked-by: Johan Almbladh <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/71d33a6b7603ec1013c9734dd8bdd4ff5e929142.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
2021-10-07powerpc/lib: Add helper to check if offset is within conditional branch rangeNaveen N. Rao3-7/+8
Add a helper to check if a given offset is within the branch range for a powerpc conditional branch instruction, and update some sites to use the new helper. Signed-off-by: Naveen N. Rao <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Acked-by: Song Liu <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/442b69a34ced32ca346a0d9a855f3f6cfdbbbd41.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
2021-10-07USB: serial: option: add Telit LE910Cx composition 0x1204Daniele Palmas1-0/+2
Add the following Telit LE910Cx composition: 0x1204: tty, adb, mbim, tty, tty, tty, tty Signed-off-by: Daniele Palmas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-10-07ALSA: hda: intel: Allow repeatedly probing on codec configuration errorsTakashi Iwai7-25/+56
It seems that a few recent AMD systems show the codec configuration errors at the early boot, while loading the driver at a later stage works magically. Although the root cause of the error isn't clear, it's certainly not bad to allow retrying the codec probe in such a case if that helps. This patch adds the capability for retrying the probe upon codec probe errors on the certain AMD platforms. The probe_work is changed to a delayed work, and at the secondary call, it'll jump to the codec probing. Note that, not only adding the re-probing, this includes the behavior changes in the codec configuration function. Namely, snd_hda_codec_configure() won't unregister the codec at errors any longer. Instead, its caller, azx_codec_configure() unregisters the codecs with the probe failures *if* any codec has been successfully configured. If all codec probe failed, it doesn't unregister but let it re-probed -- which is the most case we're seeing and this patch tries to improve. Even if the driver doesn't re-probe or give up, it will go to the "free-all" error path, hence the leftover codecs shall be disabled / deleted in anyway. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1190801 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-10-06objtool: Update section header before relocationsMichael Forney1-29/+17
The libelf implementation from elftoolchain has a safety check in gelf_update_rel[a] to check that the data corresponds to a section that has type SHT_REL[A] [0]. If the relocation is updated before the section header is updated with the proper type, this check fails. To fix this, update the section header first, before the relocations. Previously, the section size was calculated in elf_rebuild_reloc_section by counting the number of entries in the reloc_list. However, we now need the size during elf_write so instead keep a running total and add to it for every new relocation. [0] https://sourceforge.net/p/elftoolchain/mailman/elftoolchain-developers/thread/CAGw6cBtkZro-8wZMD2ULkwJ39J+tHtTtAWXufMjnd3cQ7XG54g@mail.gmail.com/ Signed-off-by: Michael Forney <[email protected]> Reviewed-by: Miroslav Benes <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-06objtool: Check for gelf_update_rel[a] failuresMichael Forney1-2/+8
Otherwise, if these fail we end up with garbage data in the .rela.orc_unwind_ip section, leading to errors like ld: fs/squashfs/namei.o: bad reloc symbol index (0x7f16 >= 0x12) for offset 0x7f16d5c82cc8 in section `.orc_unwind_ip' Signed-off-by: Michael Forney <[email protected]> Reviewed-by: Miroslav Benes <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-10-06Merge tag 'devicetree-fixes-for-5.15-3' of ↵Linus Torvalds9-12/+6
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Add another allowed address for TI sn65dsi86 - Drop more redundant minItems/maxItems - Fix more graph 'unevaluatedProperties' warnings in media bindings * tag 'devicetree-fixes-for-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value dt-bindings: Drop more redundant 'maxItems/minItems' dt-bindings: media: Fix more graph 'unevaluatedProperties' related warnings
2021-10-06kunit: fix kernel-doc warnings due to mismatched arg namesDaniel Latypov1-3/+3
Commit 7122debb4367 ("kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers") added new functions but called last arg `flags`, unlike the existing code that used `gfp`. This only is an issue in test.h, test.c still used `gfp`. But the documentation was copy-pasted with the old names, leading to kernel-doc warnings. Do s/flags/gfp to make the names consistent and fix the warnings. Fixes: 7122debb4367 ("kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers") Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Daniel Latypov <[email protected]> Reviewed-by: Randy Dunlap <[email protected]> Reviewed-by: Brendan Higgins <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-10-06bitfield: build kunit tests without structleak pluginArnd Bergmann1-1/+1
The structleak plugin causes the stack frame size to grow immensely: lib/bitfield_kunit.c: In function 'test_bitfields_constants': lib/bitfield_kunit.c:93:1: error: the frame size of 7440 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Turn it off in this file. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Brendan Higgins <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-10-06thunderbolt: build kunit tests without structleak pluginBrendan Higgins1-0/+1
The structleak plugin causes the stack frame size to grow immensely when used with KUnit: drivers/thunderbolt/test.c:1529:1: error: the frame size of 1176 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Turn it off in this file. Linus already split up tests in this file, so this change *should* be redundant now. Signed-off-by: Brendan Higgins <[email protected]> Suggested-by: Arnd Bergmann <[email protected]> Acked-by: Mika Westerberg <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.