| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Set number of engines before attempting to create contexts so the
function free_engines can clean up properly. Also check return of
alloc_engines for NULL.
v2:
(Tvrtko)
- Send as stand alone patch
(John Harrison)
- Check for alloc_engines returning NULL
v3:
(Checkpatch / Tvrtko)
- Remove braces around single line if statement
Cc: Jason Ekstrand <[email protected]>
Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Reviewed-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Cc: <[email protected]>
Signed-off-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 84edf53776343d6b5bf5fa59a6f600a22ca23c40)
Signed-off-by: Jani Nikula <[email protected]>
|
|
Drop HBM responses also in the early shutdown phase where
the usual traffic is allowed.
Extend the rule that drop HBM responses received during the shutdown phase
by also in MEI_DEV_POWERING_DOWN state.
This resolves the stall if the driver is stopping in the middle
of the link init or link reset.
Fixes: da3eb47c90d4 ("mei: hbm: drop hbm responses on shutdown")
Fixes: 36edb1407c3c ("mei: allow clients on bus to communicate in remove callback")
Cc: <[email protected]> # v5.12+
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When an interrupt is passed through, the KVM XIVE device calls the
set_vcpu_affinity() handler which raises the P bit to mask the
interrupt and to catch any in-flight interrupts while routing the
interrupt to the guest.
On the guest side, drivers (like some Intels) can request at probe
time some MSIs and call synchronize_irq() to check that there are no
in flight interrupts. This will call the XIVE get_irqchip_state()
handler which will always return true as the interrupt P bit has been
set on the host side and lock the CPU in an infinite loop.
Fix that by discarding disabled interrupts in get_irqchip_state().
Fixes: da15c03b047d ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race")
Cc: [email protected] #v5.4+
Signed-off-by: Cédric Le Goater <[email protected]>
Tested-by: seeteena <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Vladimir Zapolskiy reports:
commit a7259df76702 ("memblock: make memblock_find_in_range method private")
invokes a kernel panic while running kmemleak on OF platforms with nomaped
regions:
Unable to handle kernel paging request at virtual address fff000021e00000
[...]
scan_block+0x64/0x170
scan_gray_list+0xe8/0x17c
kmemleak_scan+0x270/0x514
kmemleak_write+0x34c/0x4ac
Indeed, NOMAP regions don't have linear map entries so an attempt to scan
these areas would fault.
Prevent such faults by excluding NOMAP regions from kmemleak.
Link: https://lore.kernel.org/all/[email protected]
Fixes: a7259df76702 ("memblock: make memblock_find_in_range method private")
Signed-off-by: Mike Rapoport <[email protected]>
Tested-by: Vladimir Zapolskiy <[email protected]>
|
|
SCSI host release is triggered when SCSI device is freed. We have to make
sure that the low-level device driver module won't be unloaded before SCSI
host instance is released because shost->hostt is required in the release
handler.
Make sure to put LLD module refcnt after SCSI device is released.
Fixes a kernel panic of 'BUG: unable to handle page fault for address'
reported by Changhui and Yi.
Link: https://lore.kernel.org/r/[email protected]
Cc: Greg Kroah-Hartman <[email protected]>
Reported-by: Changhui Zhong <[email protected]>
Reported-by: Yi Zhang <[email protected]>
Tested-by: Yi Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The validation on the length of incoming packets performed in
storvsc_on_channel_callback() does not apply to unsolicited packets with ID
of 0 sent by Hyper-V. Adjust the validation for such unsolicited packets.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 91b1b640b834b2 ("scsi: storvsc: Validate length of incoming packet in storvsc_on_channel_callback()")
Reported-by: Dexuan Cui <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Reviewed-by: Haiyang Zhang <[email protected]>
Signed-off-by: Andrea Parri (Microsoft) <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Previously, when msi_populate_sysfs() failed, we saved the error return
value as dev->msi_irq_groups, which leads to a page fault when
free_msi_irqs() calls msi_destroy_sysfs().
To prevent this, leave dev->msi_irq_groups alone when msi_populate_sysfs()
fails.
Found by the Hulk Robot when injecting a memory allocation fault in
msi_populate_sysfs():
BUG: unable to handle page fault for address: fffffffffffffff4
...
Call Trace:
msi_destroy_sysfs+0x30/0xa0
free_msi_irqs+0x11d/0x1b0
Fixes: 2f170814bdd2 ("genirq/msi: Move MSI sysfs handling from PCI to MSI core")
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Barry Song <[email protected]>
|
|
Vladimir Oltean says:
====================
Felix DSA driver fixes
This is an assorted collection of fixes for issues seen on the NXP
LS1028A switch.
- PTP packet drops due to switch congestion result in catastrophic
damage to the driver's state
- loops are not blocked by STP if using the ocelot-8021q tagger
- driver uses the wrong CPU port when two of them are defined in DT
- module autoloading is broken* with both tagging protocol drivers
(ocelot and ocelot-8021q)
Changes in v2:
- Stop printing that we aren't going to take TX timestamps if we don't
have TX timestamping anyway, and we are just carrying PTP frames for a
cascaded DSA switch.
- Shorten the deferred xmit kthread name so that it fits the 16
character limit (TASK_COMM_LEN)
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The NXP LS1028A switch has two Ethernet ports towards the CPU, but only
one of them is capable of acting as an NPI port at a time (inject and
extract packets using DSA tags).
However, using the alternative ocelot-8021q tagging protocol, it should
be possible to use both CPU ports symmetrically, but for that we need to
mark both ports in the device tree as DSA masters.
In the process of doing that, it can be seen that traffic to/from the
network stack gets broken, and this is because the Felix driver iterates
through all DSA CPU ports and configures them as NPI ports. But since
there can only be a single NPI port, we effectively end up in a
situation where DSA thinks the default CPU port is the first one, but
the hardware port configured to be an NPI is the last one.
I would like to treat this as a bug, because if the updated device trees
are going to start circulating, it would be really good for existing
kernels to support them, too.
Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ports
When setting up a bridge with stp_state 1, topology changes are not
detected and loops are not blocked. This is because the standard way of
transmitting a packet, based on VLAN IDs redirected by VCAP IS2 to the
right egress port, does not override the port STP state (in the case of
Ocelot switches, that's really the PGID_SRC masks).
To force a packet to be injected into a port that's BLOCKING, we must
send it as a control packet, which means in the case of this tagger to
send it using the manual register injection method. We already do this
for PTP frames, extend the logic to apply to any link-local MAC DA.
Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
At present, when a PTP packet which requires TX timestamping gets
dropped under congestion by the switch, things go downhill very fast.
The driver keeps a clone of that skb in a queue of packets awaiting TX
timestamp interrupts, but interrupts will never be raised for the
dropped packets.
Moreover, matching timestamped packets to timestamps is done by a 2-bit
timestamp ID, and this can wrap around and we can match on the wrong skb.
Since with the default NPI-based tagging protocol, we get no notification
about packet drops, the best we can do is eventually recover from the
drop of a PTP frame: its skb will be dead memory until another skb which
was assigned the same timestamp ID happens to find it.
However, with the ocelot-8021q tagger which injects packets using the
manual register interface, it appears that we can check for more
information, such as:
- whether the input queue has reached the high watermark or not
- whether the injection group's FIFO can accept additional data or not
so we know that a PTP frame is likely to get dropped before actually
sending it, and drop it ourselves (because DSA uses NETIF_F_LLTX, so it
can't return NETDEV_TX_BUSY to ask the qdisc to requeue the packet).
But when we do that, we can also remove the skb from the timestamping
queue, because there surely won't be any timestamp that matches it.
Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Michael reported that when using the "ocelot-8021q" tagging protocol,
the switch driver module must be manually loaded before the tagging
protocol can be loaded/is available.
This appears to be the same problem described here:
https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
where due to the fact that DSA tagging protocols make use of symbols
exported by the switch drivers, circular dependencies appear and this
breaks module autoloading.
The ocelot_8021q driver needs the ocelot_can_inject() and
ocelot_port_inject_frame() functions from the switch library. Previously
the wrong approach was taken to solve that dependency: shims were
provided for the case where the ocelot switch library was compiled out,
but that turns out to be insufficient, because the dependency when the
switch lib _is_ compiled is problematic too.
We cannot declare ocelot_can_inject() and ocelot_port_inject_frame() as
static inline functions, because these access I/O functions like
__ocelot_write_ix() which is called by ocelot_write_rix(). Making those
static inline basically means exposing the whole guts of the ocelot
switch library, not ideal...
We already have one tagging protocol driver which calls into the switch
driver during xmit but not using any exported symbol: sja1105_defer_xmit.
We can do the same thing here: create a kthread worker and one work item
per skb, and let the switch driver itself do the register accesses to
send the skb, and then consume it.
Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Reported-by: Michael Walle <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As explained here:
https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
DSA tagging protocol drivers cannot depend on symbols exported by switch
drivers, because this creates a circular dependency that breaks module
autoloading.
The tag_ocelot.c file depends on the ocelot_ptp_rew_op() function
exported by the common ocelot switch lib. This function looks at
OCELOT_SKB_CB(skb) and computes how to populate the REW_OP field of the
DSA tag, for PTP timestamping (the command: one-step/two-step, and the
TX timestamp identifier).
None of that requires deep insight into the driver, it is quite
stateless, as it only depends upon the skb->cb. So let's make it a
static inline function and put it in include/linux/dsa/ocelot.h, a
file that despite its name is used by the ocelot switch driver for
populating the injection header too - since commit 40d3f295b5fe ("net:
mscc: ocelot: use common tag parsing code with DSA").
With that function declared as static inline, its body is expanded
inside each call site, so the dependency is broken and the DSA tagger
can be built without the switch library, upon which the felix driver
depends.
Fixes: 39e5308b3250 ("net: mscc: ocelot: support PTP Sync one-step timestamping")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
the skb PTP header
The sad reality is that when a PTP frame with a TX timestamping request
is transmitted, it isn't guaranteed that it will make it all the way to
the wire (due to congestion inside the switch), and that a timestamp
will be taken by the hardware and placed in the timestamp FIFO where an
IRQ will be raised for it.
The implication is that if enough PTP frames are silently dropped by the
hardware such that the timestamp ID has rolled over, it is possible to
match a timestamp to an old skb.
Furthermore, nobody will match on the real skb corresponding to this
timestamp, since we stupidly matched on a previous one that was stale in
the queue, and stopped there.
So PTP timestamping will be broken and there will be no way to recover.
It looks like the hardware parses the sequenceID from the PTP header,
and also provides that metadata for each timestamp. The driver currently
ignores this, but it shouldn't.
As an extra resiliency measure, do the following:
- check whether the PTP sequenceID also matches between the skb and the
timestamp, treat the skb as stale otherwise and free it
- if we see a stale skb, don't stop there and try to match an skb one
more time, chances are there's one more skb in the queue with the same
timestamp ID, otherwise we wouldn't have ever found the stale one (it
is by timestamp ID that we matched it).
While this does not prevent PTP packet drops, it at least prevents
the catastrophic consequences of incorrect timestamp matching.
Since we already call ptp_classify_raw in the TX path, save the result
in the skb->cb of the clone, and just use that result in the interrupt
code path.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
It appears that Ocelot switches cannot timestamp non-PTP frames,
I tested this using the isochron program at:
https://github.com/vladimiroltean/tsn-scripts
with the result that the driver increments the ocelot_port->ts_id
counter as expected, puts it in the REW_OP, but the hardware seems to
not timestamp these packets at all, since no IRQ is emitted.
Therefore check whether we are sending PTP frames, and refuse to
populate REW_OP otherwise.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When skb_match is NULL, it means we received a PTP IRQ for a timestamp
ID that the kernel has no idea about, since there is no skb in the
timestamping queue with that timestamp ID.
This is a grave error and not something to just "continue" over.
So print a big warning in case this happens.
Also, move the check above ocelot_get_hwtimestamp(), there is no point
in reading the full 64-bit current PTP time if we're not going to do
anything with it anyway for this skb.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
PTP packets with 2-step TX timestamp requests are matched to packets
based on the egress port number and a 6-bit timestamp identifier.
All PTP timestamps are held in a common FIFO that is 128 entry deep.
This patch ensures that back-to-back timestamping requests cannot exceed
the hardware FIFO capacity. If that happens, simply send the packets
without requesting a TX timestamp to be taken (in the case of felix,
since the DSA API has a void return code in ds->ops->port_txtstamp) or
drop them (in the case of ocelot).
I've moved the ts_id_lock from a per-port basis to a per-switch basis,
because we need separate accounting for both numbers of PTP frames in
flight. And since we need locking to inc/dec the per-switch counter,
that also offers protection for the per-port counter and hence there is
no reason to have a per-port counter anymore.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
At present, there is a problem when user space bombards a port with PTP
event frames which have TX timestamping requests (or when a tc-taprio
offload is installed on a port, which delays the TX timestamps by a
significant amount of time). The driver will happily roll over the 2-bit
timestamp ID and this will cause incorrect matches between an skb and
the TX timestamp collected from the FIFO.
The Ocelot switches have a 6-bit PTP timestamp identifier, and the value
63 is reserved, so that leaves identifiers 0-62 to be used.
The timestamp identifiers are selected by the REW_OP packet field, and
are actually shared between CPU-injected frames and frames which match a
VCAP IS2 rule that modifies the REW_OP. The hardware supports
partitioning between the two uses of the REW_OP field through the
PTP_ID_LOW and PTP_ID_HIGH registers, and by default reserves the PTP
IDs 0-3 for CPU-injected traffic and the rest for VCAP IS2.
The driver does not use VCAP IS2 to set REW_OP for 2-step timestamping,
and it also writes 0xffffffff to both PTP_ID_HIGH and PTP_ID_LOW in
ocelot_init_timestamp() which makes all timestamp identifiers available
to CPU injection.
Therefore, we can make use of all 63 timestamp identifiers, which should
allow more timestampable packets to be in flight on each port. This is
only part of the solution, more issues will be addressed in future changes.
Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Vladimir Oltean says:
====================
Fix circular dependency between sja1105 and tag_sja1105
As discussed here:
https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
DSA tagging protocols cannot use symbols exported by switch drivers.
Eliminate the two instances of that from tag_sja1105, and that allows us
to have a working setup with modules again.
====================
Re-applying to net, this was mistakenly applied to net-next,
see first Link.
Link: https://lore.kernel.org/r/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
driver
It's nice to be able to test a tagging protocol with dsa_loop, but not
at the cost of losing the ability of building the tagging protocol and
switch driver as modules, because as things stand, there is a circular
dependency between the two. Tagging protocol drivers cannot depend on
switch drivers, that is a hard fact.
The reasoning behind the blamed patch was that accessing dp->priv should
first make sure that the structure behind that pointer is what we really
think it is.
Currently the "sja1105" and "sja1110" tagging protocols only operate
with the sja1105 switch driver, just like any other tagging protocol and
switch combination. The only way to mix and match them is by modifying
the code, and this applies to dsa_loop as well (by default that uses
DSA_TAG_PROTO_NONE). So while in principle there is an issue, in
practice there isn't one.
Until we extend dsa_loop to allow user space configuration, treat the
problem as a non-issue and just say that DSA ports found by tag_sja1105
are always sja1105 ports, which is in fact true. But keep the
dsa_port_is_sja1105 function so that it's easy to patch it during
testing, and rely on dead code elimination.
Fixes: 994d2cbb08ca ("net: dsa: tag_sja1105: be dsa_loop-safe")
Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The problem is that DSA tagging protocols really must not depend on the
switch driver, because this creates a circular dependency at insmod
time, and the switch driver will effectively not load when the tagging
protocol driver is missing.
The code was structured in the way it was for a reason, though. The DSA
driver-facing API for PTP timestamping relies on the assumption that
two-step TX timestamps are provided by the hardware in an out-of-band
manner, typically by raising an interrupt and making that timestamp
available inside some sort of FIFO which is to be accessed over
SPI/MDIO/etc.
So the API puts .port_txtstamp into dsa_switch_ops, because it is
expected that the switch driver needs to save some state (like put the
skb into a queue until its TX timestamp arrives).
On SJA1110, TX timestamps are provided by the switch as Ethernet
packets, so this makes them be received and processed by the tagging
protocol driver. This in itself is great, because the timestamps are
full 64-bit and do not require reconstruction, and since Ethernet is the
fastest I/O method available to/from the switch, PTP timestamps arrive
very quickly, no matter how bottlenecked the SPI connection is, because
SPI interaction is not needed at all.
DSA's code structure and strict isolation between the tagging protocol
driver and the switch driver break the natural code organization.
When the tagging protocol driver receives a packet which is classified
as a metadata packet containing timestamps, it passes those timestamps
one by one to the switch driver, which then proceeds to compare them
based on the recorded timestamp ID that was generated in .port_txtstamp.
The communication between the tagging protocol and the switch driver is
done through a method exported by the switch driver, sja1110_process_meta_tstamp.
To satisfy build requirements, we force a dependency to build the
tagging protocol driver as a module when the switch driver is a module.
However, as explained in the first paragraph, that causes the circular
dependency.
To solve this, move the skb queue from struct sja1105_private :: struct
sja1105_ptp_data to struct sja1105_private :: struct sja1105_tagger_data.
The latter is a data structure for which hacks have already been put
into place to be able to create persistent storage per switch that is
accessible from the tagging protocol driver (see sja1105_setup_ports).
With the skb queue directly accessible from the tagging protocol driver,
we can now move sja1110_process_meta_tstamp into the tagging driver
itself, and avoid exporting a symbol.
Fixes: 566b18c8b752 ("net: dsa: sja1105: implement TX timestamping for SJA1110")
Link: https://lore.kernel.org/netdev/20210908220834.d7gmtnwrorhharna@skbuf/
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Flip the sign of a return value check, thereby suppressing the following
spurious error:
port 2 failed to notify DSA_NOTIFIER_BRIDGE_LEAVE: -EOPNOTSUPP
... which is emitted when removing an unoffloaded DSA switch port from a
bridge.
Fixes: d371b7c92d19 ("net: dsa: Unset vlan_filtering when ports leave the bridge")
Signed-off-by: Alvin Šipraga <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In commit 74fc4f828769 ("net: Fix offloading indirect devices dependency
on qdisc order creation"), it adds a process to trigger the callback to
setup the bo callback when the driver regists a callback.
In our current implement, we are not ready to run the callback when nfp
call the function flow_indr_dev_register, then there will be error
message as:
kernel: Oops: 0000 [#1] SMP PTI
kernel: CPU: 0 PID: 14119 Comm: kworker/0:0 Tainted: G
kernel: Workqueue: events work_for_cpu_fn
kernel: RIP: 0010:nfp_flower_indr_setup_tc_cb+0x258/0x410
kernel: RSP: 0018:ffffbc1e02c57bf8 EFLAGS: 00010286
kernel: RAX: 0000000000000000 RBX: ffff9c761fabc000 RCX: 0000000000000001
kernel: RDX: 0000000000000001 RSI: fffffffffffffff0 RDI: ffffffffc0be9ef1
kernel: RBP: ffffbc1e02c57c58 R08: ffffffffc08f33aa R09: ffff9c6db7478800
kernel: R10: 0000009c003f6e00 R11: ffffbc1e02800000 R12: ffffbc1e000d9000
kernel: R13: ffffbc1e000db428 R14: ffff9c6db7478800 R15: ffff9c761e884e80
kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: fffffffffffffff0 CR3: 00000009e260a004 CR4: 00000000007706f0
kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
kernel: PKRU: 55555554
kernel: Call Trace:
kernel: ? flow_indr_dev_register+0xab/0x210
kernel: ? __cond_resched+0x15/0x30
kernel: ? kmem_cache_alloc_trace+0x44/0x4b0
kernel: ? nfp_flower_setup_tc+0x1d0/0x1d0 [nfp]
kernel: flow_indr_dev_register+0x158/0x210
kernel: ? tcf_block_unbind+0xe0/0xe0
kernel: nfp_flower_init+0x40b/0x650 [nfp]
kernel: nfp_net_pci_probe+0x25f/0x960 [nfp]
kernel: ? nfp_rtsym_read_le+0x76/0x130 [nfp]
kernel: nfp_pci_probe+0x6a9/0x820 [nfp]
kernel: local_pci_probe+0x45/0x80
So we need to call flow_indr_dev_register in app start process instead of
init stage.
Fixes: 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation")
Signed-off-by: Baowen Zheng <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Louis Peens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
On R-Car D3 and E3, the LVDS encoders provide the pixel clock to the DU,
even when LVDS outputs are not used. For this reason, the rcar-lvds
driver probes successfully on those platforms even if no further bridge
or panel is connected to the LVDS output, in order to provide the
rcar_lvds_clk_enable() and rcar_lvds_clk_disable() functions to the DU
driver.
If an LVDS output isn't connected, trying to create a DRM connector for
the output will fail. Fix this by skipping connector creation in that
case, and also skip creation of the DRM encoder as there's no point in
an encoder without a connector.
Fixes: e9e056949c92 ("drm: rcar-du: lvds: Convert to DRM panel bridge helper")
Reported-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
(cherry picked from commit 187502afe87a0fc96832056558978fa423920ee0)
Signed-off-by: Dave Airlie <[email protected]>
|
|
Commit 846d6da1fcdb ("net/mlx5e: Fix division by 0 in
mlx5e_select_queue") makes mlx5e_build_nic_params assign a non-zero
initial value to priv->num_tc_x_num_ch, so that mlx5e_select_queue
doesn't fail with division by 0 if called before the first activation of
channels. However, the initialization flow of representors doesn't call
mlx5e_build_nic_params, so this bug can still happen with representors.
This commit fixes the bug by adding the missing assignment to
mlx5e_build_rep_params.
Fixes: 846d6da1fcdb ("net/mlx5e: Fix division by 0 in mlx5e_select_queue")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Due to current HW arch limitations, RX-FCS (scattering FCS frame field
to software) and RX-port-timestamp (improved timestamp accuracy on the
receive side) can't work together.
RX-port-timestamp is not controlled by the user and it is enabled by
default when supported by the HW/FW.
This patch sets RX-port-timestamp opposite to RX-FCS configuration.
Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag")
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Before this patch, mlx5 representors advertised the
NETIF_F_VLAN_CHALLENGED bit, this could lead to missing features when
using reps with vxlan/bridge and maybe other virtual interfaces,
when such interfaces inherit this bit and block vlan usage in their
topology.
Example:
$ip link add dev bridge type bridge
# add representor interface to the bridge
$ip link set dev pf0hpf master
$ip link add link bridge name vlan10 type vlan id 10 protocol 802.1q
Error: 8021q: VLANs not supported on device.
Reps are perfectly capable of handling vlan traffic, although they don't
implement vlan_{add,kill}_vid ndos, hence, remove
NETIF_F_VLAN_CHALLENGED advertisement.
Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors")
Reported-by: Roopa Prabhu <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
|
|
Prior to this patch in case mlx5_core_destroy_cq() failed it returns
without completing all destroy operations and that leads to memory leak.
Instead, complete the destroy flow before return error.
Also move mlx5_debug_cq_remove() to the beginning of mlx5_core_destroy_cq()
to be symmetrical with mlx5_core_create_cq().
kmemleak complains on:
unreferenced object 0xc000000038625100 (size 64):
comm "ethtool", pid 28301, jiffies 4298062946 (age 785.380s)
hex dump (first 32 bytes):
60 01 48 94 00 00 00 c0 b8 05 34 c3 00 00 00 c0 `.H.......4.....
02 00 00 00 00 00 00 00 00 db 7d c1 00 00 00 c0 ..........}.....
backtrace:
[<000000009e8643cb>] add_res_tree+0xd0/0x270 [mlx5_core]
[<00000000e7cb8e6c>] mlx5_debug_cq_add+0x5c/0xc0 [mlx5_core]
[<000000002a12918f>] mlx5_core_create_cq+0x1d0/0x2d0 [mlx5_core]
[<00000000cef0a696>] mlx5e_create_cq+0x210/0x3f0 [mlx5_core]
[<000000009c642c26>] mlx5e_open_cq+0xb4/0x130 [mlx5_core]
[<0000000058dfa578>] mlx5e_ptp_open+0x7f4/0xe10 [mlx5_core]
[<0000000081839561>] mlx5e_open_channels+0x9cc/0x13e0 [mlx5_core]
[<0000000009cf05d4>] mlx5e_switch_priv_channels+0xa4/0x230
[mlx5_core]
[<0000000042bbedd8>] mlx5e_safe_switch_params+0x14c/0x300
[mlx5_core]
[<0000000004bc9db8>] set_pflag_tx_port_ts+0x9c/0x160 [mlx5_core]
[<00000000a0553443>] mlx5e_set_priv_flags+0xd0/0x1b0 [mlx5_core]
[<00000000a8f3d84b>] ethnl_set_privflags+0x234/0x2d0
[<00000000fd27f27c>] genl_family_rcv_msg_doit+0x108/0x1d0
[<00000000f495e2bb>] genl_family_rcv_msg+0xe4/0x1f0
[<00000000646c5c2c>] genl_rcv_msg+0x78/0x120
[<00000000d53e384e>] netlink_rcv_skb+0x74/0x1a0
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Valentine Fatiev <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Do not allow configurations of MQPRIO channel mode that do not
fully define and utilize the channels txqs.
Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode")
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Maxim Mikityanskiy <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Currently, bridge cleanup is calling to cancel_delayed_work(). When this
function is finished, there is a chance that the delayed work is still
running. Also, the delayed work is queueing itself.
As a result, we might execute the delayed work after the bridge cleanup
have finished and hit a null-ptr oops[1].
Fix it by using cancel_delayed_work_sync(), which is waiting until the
work is done and will cancel the queue work.
[1]
[ 8202.143043 ] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 8202.144438 ] #PF: supervisor write access in kernel mode
[ 8202.145476 ] #PF: error_code(0x0002) - not-present page
[ 8202.146520 ] PGD 0 P4D 0
[ 8202.147126 ] Oops: 0002 [#1] SMP NOPTI
[ 8202.147899 ] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.14.0-rc6_for_upstream_min_debug_2021_08_25_16_06 #1
[ 8202.149741 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 8202.151908 ] RIP: 0010:_raw_spin_lock+0xc/0x20
[ 8202.156234 ] RSP: 0018:ffff88846f885ea0 EFLAGS: 00010046
[ 8202.157289 ] RAX: 0000000000000000 RBX: ffff88846f880000 RCX: 0000000000000000
[ 8202.158731 ] RDX: 0000000000000001 RSI: ffff8881004000c8 RDI: 0000000000000000
[ 8202.160177 ] RBP: ffff8881fe684978 R08: ffff888100140000 R09: ffffffff824455b8
[ 8202.161569 ] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
[ 8202.163004 ] R13: 0000000000000012 R14: 0000000000000200 R15: ffff88812992d000
[ 8202.164018 ] FS: 0000000000000000(0000) GS:ffff88846f880000(0000) knlGS:0000000000000000
[ 8202.164960 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8202.165634 ] CR2: 0000000000000000 CR3: 0000000108cac004 CR4: 0000000000370ea0
[ 8202.166450 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 8202.167807 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 8202.168852 ] Call Trace:
[ 8202.169421 ] <IRQ>
[ 8202.169792 ] __queue_work+0xf2/0x3d0
[ 8202.170481 ] ? queue_work_node+0x40/0x40
[ 8202.171270 ] call_timer_fn+0x2b/0x100
[ 8202.171932 ] __run_timers.part.0+0x152/0x220
[ 8202.172717 ] ? __hrtimer_run_queues+0x171/0x290
[ 8202.173526 ] ? kvm_clock_get_cycles+0xd/0x10
[ 8202.174232 ] ? ktime_get+0x35/0x90
[ 8202.174943 ] run_timer_softirq+0x26/0x50
[ 8202.175745 ] __do_softirq+0xc7/0x271
[ 8202.176373 ] irq_exit_rcu+0x93/0xb0
[ 8202.176983 ] sysvec_apic_timer_interrupt+0x72/0x90
[ 8202.177755 ] </IRQ>
[ 8202.178245 ] asm_sysvec_apic_timer_interrupt+0x12/0x20
Fixes: c636a0f0f3f0 ("net/mlx5: Bridge, dynamic entry ageing")
Signed-off-by: Shay Drory <[email protected]>
Reviewed-by: Vlad Buslov <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
The device advertises 8 formats, but only a rate of 48kHz is honored
by the hardware and 24 bits give chopped audio, so only report the
one working combination. This fixes out-of-the-box audio experience
with PipeWire which otherwise attempts to choose S24_3LE (while
PulseAudio defaulted to S16_LE).
Signed-off-by: Jonas Hahnfeld <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix CMA gigantic page order for 16K/64K page sizes
- Fix section mismatch error in drivers/acpi/arm64/gtdt.c
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
acpi/arm64: fix next_platform_timer() section mismatch error
arm64/hugetlb: fix CMA gigantic page order for non-4K PAGE_SIZE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A second (small) set of pdx86 bug-fixes and new hardware ids for 5.15"
* tag 'platform-drivers-x86-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: int1092: Fix non sequential device mode handling
platform/x86: intel_skl_int3472: Correct null check
platform/x86: gigabyte-wmi: add support for B550 AORUS ELITE AX V2
platform/x86: amd-pmc: Add alternative acpi id for PMC controller
platform/x86: intel_scu_ipc: Update timeout value in comment
platform/x86: intel_scu_ipc: Increase virtual timeout to 10s
platform/x86: intel_scu_ipc: Fix busy loop expiry time
platform/x86: dell: Make DELL_WMI_PRIVACY depend on DELL_WMI
platform/mellanox: mlxreg-io: Fix read access of n-bytes size attributes
platform/mellanox: mlxreg-io: Fix argument base in kstrtou32() call
|
|
dm_io_dec_pending() calls end_io_acct() first and will then dec md
in-flight pending count. But if a task is swapping DM table at same
time this can result in a crash due to mempool->elements being NULL:
task1 task2
do_resume
->do_suspend
->dm_wait_for_completion
bio_endio
->clone_endio
->dm_io_dec_pending
->end_io_acct
->wakeup task1
->dm_swap_table
->__bind
->__bind_mempools
->bioset_exit
->mempool_exit
->free_io
[ 67.330330] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
......
[ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO)
[ 67.330510] pc : mempool_free+0x70/0xa0
[ 67.330515] lr : mempool_free+0x4c/0xa0
[ 67.330520] sp : ffffff8008013b20
[ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004
[ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8
[ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800
[ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800
[ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80
[ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c
[ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd
[ 67.330563] x15: 000000000093b41e x14: 0000000000000010
[ 67.330569] x13: 0000000000007f7a x12: 0000000034155555
[ 67.330574] x11: 0000000000000001 x10: 0000000000000001
[ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000
[ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a
[ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001
[ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8
[ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970
[ 67.330609] Call trace:
[ 67.330616] mempool_free+0x70/0xa0
[ 67.330627] bio_put+0xf8/0x110
[ 67.330638] dec_pending+0x13c/0x230
[ 67.330644] clone_endio+0x90/0x180
[ 67.330649] bio_endio+0x198/0x1b8
[ 67.330655] dec_pending+0x190/0x230
[ 67.330660] clone_endio+0x90/0x180
[ 67.330665] bio_endio+0x198/0x1b8
[ 67.330673] blk_update_request+0x214/0x428
[ 67.330683] scsi_end_request+0x2c/0x300
[ 67.330688] scsi_io_completion+0xa0/0x710
[ 67.330695] scsi_finish_command+0xd8/0x110
[ 67.330700] scsi_softirq_done+0x114/0x148
[ 67.330708] blk_done_softirq+0x74/0xd0
[ 67.330716] __do_softirq+0x18c/0x374
[ 67.330724] irq_exit+0xb4/0xb8
[ 67.330732] __handle_domain_irq+0x84/0xc0
[ 67.330737] gic_handle_irq+0x148/0x1b0
[ 67.330744] el1_irq+0xe8/0x190
[ 67.330753] lpm_cpuidle_enter+0x4f8/0x538
[ 67.330759] cpuidle_enter_state+0x1fc/0x398
[ 67.330764] cpuidle_enter+0x18/0x20
[ 67.330772] do_idle+0x1b4/0x290
[ 67.330778] cpu_startup_entry+0x20/0x28
[ 67.330786] secondary_start_kernel+0x160/0x170
Fix this by:
1) Establishing pointers to 'struct dm_io' members in
dm_io_dec_pending() so that they may be passed into end_io_acct()
_after_ free_io() is called.
2) Moving end_io_acct() after free_io().
Cc: [email protected]
Signed-off-by: Jiazi Li <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
DM uses blk-mq's quiesce/unquiesce to stop/start device mapper queue.
But blk-mq's unquiesce may come from outside events, such as elevator
switch, updating nr_requests or others, and request may come during
suspend, so simply ask for blk-mq to requeue it.
Fixes one kernel panic issue when running updating nr_requests and
dm-mpath suspend/resume stress test.
Cc: [email protected]
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Don't populate the read-only array descs on the stack but instead it
static and add extra const. Also makes the object code smaller by 66
bytes:
Before:
text data bss dec hex filename
42382 11140 512 54034 d312 ./drivers/md/dm-clone-target.o
After:
text data bss dec hex filename
42220 11236 512 53968 d2d0 ./drivers/md/dm-clone-target.o
(gcc version 11.2.0)
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Without FEC, dm-verity won't call verity_handle_err() when I/O fails,
but with FEC enabled, it currently does even if an I/O error has
occurred.
If there is an I/O error and FEC correction fails, return the error
instead of calling verity_handle_err() again.
Suggested-by: Sami Tolvanen <[email protected]>
Signed-off-by: Akilesh Kailash <[email protected]>
Reviewed-by: Sami Tolvanen <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
In commit 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and
sync thread") we meant to add a check where before we call ->set_param() we
make sure the iscsi_cls_connection is bound. The problem is that between
versions 4 and 5 of the patch the deletion of the unchecked set_param()
call was dropped so we ended up with 2 calls. As a result we can still hit
a crash where we access the unbound connection on the first call.
This patch removes that first call.
Fixes: 9e67600ed6b8 ("scsi: iscsi: Fix race condition between login and sync thread")
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Li Feng <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Fix modpost Section mismatch error in next_platform_timer().
[...]
WARNING: modpost: vmlinux.o(.text.unlikely+0x26e60): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc
The function next_platform_timer() references
the variable __initdata acpi_gtdt_desc.
This is often because next_platform_timer lacks a __initdata
annotation or the annotation of acpi_gtdt_desc is wrong.
WARNING: modpost: vmlinux.o(.text.unlikely+0x26e64): Section mismatch in reference from the function next_platform_timer() to the variable .init.data:acpi_gtdt_desc
The function next_platform_timer() references
the variable __initdata acpi_gtdt_desc.
This is often because next_platform_timer lacks a __initdata
annotation or the annotation of acpi_gtdt_desc is wrong.
ERROR: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
make[1]: *** [scripts/Makefile.modpost:59: vmlinux.symvers] Error 1
make[1]: *** Deleting file 'vmlinux.symvers'
make: *** [Makefile:1176: vmlinux] Error 2
[...]
Fixes: a712c3ed9b8a ("acpi/arm64: Add memory-mapped timer support in GTDT driver")
Signed-off-by: Jackie Liu <[email protected]>
Acked-by: Hanjun Guo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
These variables are printed on the error path if match_int() fails so
they have to be initialized.
Fixes: 2958a995edc9 ("block/rnbd-clt: Support polling mode for IO latency optimization")
Fixes: 1eb54f8f5dd8 ("block/rnbd: client: sysfs interface functions")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Gioh Kim <[email protected]>
Link: https://lore.kernel.org/r/20211012084443.GA31472@kili
Signed-off-by: Jens Axboe <[email protected]>
|
|
After commit ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at
can_queue"), a 416-CPU VM running on Hyper-V hangs during boot because the
hv_storvsc driver sets scsi_driver.can_queue to an integer value that
exceeds SHRT_MAX, and hence scsi_add_host_with_dma() sets
shost->cmd_per_lun to a negative "short" value.
Use min_t(int, ...) to work around the issue.
Link: https://lore.kernel.org/r/[email protected]
Fixes: ea2f0f77538c ("scsi: core: Cap scsi_host cmd_per_lun at can_queue")
Cc: [email protected]
Reviewed-by: Haiyang Zhang <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Dexuan Cui <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
A series of devicetree fixes for the Raspberry Pi 4:
- Fix VEC reg address
- Fix MDIO address/size cells
- Fix regulator states
- Fix PCIe address formatting
Signed-off-by: Florian Fainelli <[email protected]>
|
|
The unit address is supposed to represent '<device>,<function>'. Which
are both 0 for RPi4b's XHCI controller. On top of that although
OpenFirmware states bus number goes in the high part of the last reg
parameter, FDT doesn't seem to care for it[1], so remove it.
[1] https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/#24414633
Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node")
Suggested-by: Rob Herring <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nicolas Saenz Julienne <[email protected]>
|
|
dtbs_check currently complains that:
arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning
(pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format
error, expected "0,0"
Unsurprisingly pci@0,0 is the right address, as illustrated by its reg
property:
&pcie0 {
pci@0,0 {
/*
* As defined in the IEEE Std 1275-1994 document,
* reg is a five-cell address encoded as (phys.hi
* phys.mid phys.lo size.hi size.lo). phys.hi
* should contain the device's BDF as 0b00000000
* bbbbbbbb dddddfff 00000000. The other cells
* should be zero.
*/
reg = <0 0 0 0 0>;
};
};
The device is clearly 0. So fix it.
Also add a missing 'device_type = "pci"'.
Fixes: 258f92d2f840 ("ARM: dts: bcm2711: Add reset controller to xHCI node")
Suggested-by: Rob Herring <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nicolas Saenz Julienne <[email protected]>
|
|
The snd_hdac_bus_reset_link() contains logic to clear STATESTS register
before performing controller reset. This code dates back to an old
bugfix in commit e8a7f136f5ed ("[ALSA] hda-intel - Improve HD-audio
codec probing robustness"). Originally the code was added to
azx_reset().
The code was moved around in commit a41d122449be ("ALSA: hda - Embed bus
into controller object") and ended up to snd_hdac_bus_reset_link() and
called primarily via snd_hdac_bus_init_chip().
The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is
called when controller is not in reset. In this case, STATESTS can be
cleared. This can be useful e.g. when forcing a controller reset to retry
codec probe. A normal non-power-on reset will not clear the bits.
However, this old logic is problematic when controller is already in
reset. The HDA specification states that controller must be taken out of
reset before writing to registers other than GCTL.CRST (1.0a spec,
3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost
if the controller is already in reset per the HDA specification mentioned.
This has been harmless on older hardware. On newer generation of Intel
PCIe based HDA controllers, if configured to report issues, this write
will emit an unsupported request error. If ACPI Platform Error Interface
(APEI) is enabled in kernel, this will end up to kernel log.
Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if
the function is called when controller is not in reset. Otherwise
clearing the bits is not possible and should be skipped.
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Check for potential NULL pointers.
Print error message if found.
Thread, that leads to this commit:
https://lore.kernel.org/ntfs3/[email protected]/
Reported-by: Mohammad Rasim <[email protected]>
Signed-off-by: Konstantin Komarov <[email protected]>
|
|
The Surface Laptop 4 AMD has used the AMD0005 to identify this
controller instead of using the appropriate ACPI ID AMDI0005. The
AMD0005 needs the same special casing as AMDI0005.
Link: https://github.com/linux-surface/acpidumps/tree/master/surface_laptop_4_amd
Link: https://gist.github.com/nakato/2a1a7df1a45fe680d7a08c583e1bf863
Signed-off-by: Sachi King <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Cc: 5.14+ <[email protected]> # 5.14+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
We need to define the codec pin 0x1b to be the mic, but somehow
the mic doesn't support hot plugging detection, and Windows also has
this issue, so we set it to phantom headset-mic.
Also the determine_headset_type() often returns the omtp type by a
mistake when we plug a ctia headset, this makes the mic can't record
sound at all. Because most of the headset are ctia type nowadays and
some machines have the fixed ctia type audio jack, it is possible this
machine has the fixed ctia jack too. Here we set this mic jack to
fixed ctia type, this could avoid the mic type detection mistake and
make the ctia headset work stable.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214537
Reported-and-tested-by: msd <[email protected]>
Cc: <[email protected]>
Signed-off-by: Hui Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
When OP-TEE driver is built as a module, OP-TEE client devices
registered on TEE bus during probe should be unregistered during
optee_remove. So implement optee_unregister_devices() accordingly.
Fixes: c3fa24af9244 ("tee: optee: add TEE bus device enumeration support")
Reported-by: Sudeep Holla <[email protected]>
Signed-off-by: Sumit Garg <[email protected]>
Signed-off-by: Jens Wiklander <[email protected]>
|
|
Commit 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush")
added a lock around the Tx timestamp tracker flow which is used to
cleanup any left over SKBs and prepare for device removal.
This lock is problematic because it is being held around a call to
ice_clear_phy_tstamp. The clear function takes a mutex to send a PHY
write command to firmware. This could lead to a deadlock if the mutex
actually sleeps, and causes the following warning on a kernel with
preemption debugging enabled:
[ 715.419426] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:573
[ 715.427900] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 3100, name: rmmod
[ 715.435652] INFO: lockdep is turned off.
[ 715.439591] Preemption disabled at:
[ 715.439594] [<0000000000000000>] 0x0
[ 715.446678] CPU: 52 PID: 3100 Comm: rmmod Tainted: G W OE 5.15.0-rc4+ #42 bdd7ec3018e725f159ca0d372ce8c2c0e784891c
[ 715.458058] Hardware name: Intel Corporation S2600STQ/S2600STQ, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020
[ 715.468483] Call Trace:
[ 715.470940] dump_stack_lvl+0x6a/0x9a
[ 715.474613] ___might_sleep.cold+0x224/0x26a
[ 715.478895] __mutex_lock+0xb3/0x1440
[ 715.482569] ? stack_depot_save+0x378/0x500
[ 715.486763] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.494979] ? kfree+0xc1/0x520
[ 715.498128] ? mutex_lock_io_nested+0x12a0/0x12a0
[ 715.502837] ? kasan_set_free_info+0x20/0x30
[ 715.507110] ? __kasan_slab_free+0x10b/0x140
[ 715.511385] ? slab_free_freelist_hook+0xc7/0x220
[ 715.516092] ? kfree+0xc1/0x520
[ 715.519235] ? ice_deinit_lag+0x16c/0x220 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.527359] ? ice_remove+0x1cf/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.535133] ? pci_device_remove+0xab/0x1d0
[ 715.539318] ? __device_release_driver+0x35b/0x690
[ 715.544110] ? driver_detach+0x214/0x2f0
[ 715.548035] ? bus_remove_driver+0x11d/0x2f0
[ 715.552309] ? pci_unregister_driver+0x26/0x250
[ 715.556840] ? ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.564799] ? __do_sys_delete_module.constprop.0+0x2d8/0x4e0
[ 715.570554] ? do_syscall_64+0x3b/0x90
[ 715.574303] ? entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 715.579529] ? start_flush_work+0x542/0x8f0
[ 715.583719] ? ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.591923] ice_sq_send_cmd+0x78/0x14c0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.599960] ? wait_for_completion_io+0x250/0x250
[ 715.604662] ? lock_acquire+0x196/0x200
[ 715.608504] ? do_raw_spin_trylock+0xa5/0x160
[ 715.612864] ice_sbq_rw_reg+0x1e6/0x2f0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.620813] ? ice_reset+0x130/0x130 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.628497] ? __debug_check_no_obj_freed+0x1e8/0x3c0
[ 715.633550] ? trace_hardirqs_on+0x1c/0x130
[ 715.637748] ice_write_phy_reg_e810+0x70/0xf0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.646220] ? do_raw_spin_trylock+0xa5/0x160
[ 715.650581] ? ice_ptp_release+0x910/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.658797] ? ice_ptp_release+0x255/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.667013] ice_clear_phy_tstamp+0x2c/0x110 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.675403] ice_ptp_release+0x408/0x910 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.683440] ice_remove+0x560/0x6a0 [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.691037] ? _raw_spin_unlock_irqrestore+0x46/0x73
[ 715.696005] pci_device_remove+0xab/0x1d0
[ 715.700018] __device_release_driver+0x35b/0x690
[ 715.704637] driver_detach+0x214/0x2f0
[ 715.708389] bus_remove_driver+0x11d/0x2f0
[ 715.712489] pci_unregister_driver+0x26/0x250
[ 715.716857] ice_module_exit+0xc/0x2f [ice 9a7e1ec00971c89ecd3fe0d4dc7da2b3786a421d]
[ 715.724637] __do_sys_delete_module.constprop.0+0x2d8/0x4e0
[ 715.730210] ? free_module+0x6d0/0x6d0
[ 715.733963] ? task_work_run+0xe1/0x170
[ 715.737803] ? exit_to_user_mode_loop+0x17f/0x1d0
[ 715.742509] ? rcu_read_lock_sched_held+0x12/0x80
[ 715.747215] ? trace_hardirqs_on+0x1c/0x130
[ 715.751401] do_syscall_64+0x3b/0x90
[ 715.754981] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 715.760033] RIP: 0033:0x7f4dfe59000b
[ 715.763612] Code: 73 01 c3 48 8b 0d 6d 1e 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 1e 0c 00 f7 d8 64 89 01 48
[ 715.782357] RSP: 002b:00007ffe8c891708 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 715.789923] RAX: ffffffffffffffda RBX: 00005558a20468b0 RCX: 00007f4dfe59000b
[ 715.797054] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005558a2046918
[ 715.804189] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 715.811319] R10: 00007f4dfe603ac0 R11: 0000000000000206 R12: 00007ffe8c891940
[ 715.818455] R13: 00007ffe8c8920a3 R14: 00005558a20462a0 R15: 00005558a20468b0
Notice that this is the only case where we use the lock in this way. In
the cleanup kthread and work kthread the lock is only taken around the
bit accesses. This was done intentionally to avoid this kind of issue.
The way the lock is used, we only protect ordering of bit sets vs bit
clears. The Tx writers in the hot path don't need to be protected
against the entire kthread loop. The Tx queues threads only need to
ensure that they do not re-use an index that is currently in use. The
cleanup loop does not need to block all new set bits, since it will
re-queue itself if new timestamps are present.
Fix the tracker flow so that it uses the same flow as the standard
cleanup thread. In addition, ensure the in_use bitmap actually gets
cleared properly.
This fixes the warning and also avoids the potential deadlock that might
have occurred otherwise.
Fixes: 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush")
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|