aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-04-25net: mscc: ocelot: ignore VID 0 added by 8021q moduleVladimir Oltean1-0/+10
Both the felix DSA driver and ocelot switchdev driver declare dev->features & NETIF_F_HW_VLAN_CTAG_FILTER under certain circumstances*, so the 8021q module will add VID 0 to our RX filter when the port goes up, to ensure 802.1p traffic is not dropped. We treat VID 0 as a special value (OCELOT_STANDALONE_PVID) which deliberately does not have a struct ocelot_bridge_vlan associated with it. Instead, this gets programmed to the VLAN table in ocelot_vlan_init(). If we allow external calls to modify VID 0, we reach the following situation: # ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up # ip link set swp0 master br0 # ip link set swp0 up # this adds VID 0 to ocelot->vlans with untagged=false bridge vlan port vlan-id swp0 1 PVID Egress Untagged # the bridge also adds VID 1 br0 1 PVID Egress Untagged # bridge vlan add dev swp0 vid 100 untagged Error: mscc_ocelot_switch_lib: Port with egress-tagged VLANs cannot have more than one egress-untagged (native) VLAN. This configuration should have been accepted, because ocelot_port_manage_port_tag() should select OCELOT_PORT_TAG_NATIVE. Yet it isn't, because we have an entry in ocelot->vlans which says VID 0 should be egress-tagged, something the hardware can't do. Fix this by suppressing additions/deletions on VID 0 and managing this VLAN exclusively using OCELOT_STANDALONE_PVID. *DSA toggles it when the port becomes VLAN-aware by joining a VLAN-aware bridge. Ocelot declares it unconditionally for some reason. Fixes: 54c319846086 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25net: dsa: flood multicast to CPU when slave has IFF_PROMISCVladimir Oltean1-1/+1
Certain DSA switches can eliminate flooding to the CPU when none of the ports have the IFF_ALLMULTI or IFF_PROMISC flags set. This is done by synthesizing a call to dsa_port_bridge_flags() for the CPU port, a call which normally comes from the bridge driver via switchdev. The bridge port flags and IFF_PROMISC|IFF_ALLMULTI have slightly different semantics, and due to inattention/lack of proper testing, the IFF_PROMISC flag allows unknown unicast to be flooded to the CPU, but not unknown multicast. This must be fixed by setting both BR_FLOOD (unicast) and BR_MCAST_FLOOD in the synthesized dsa_port_bridge_flags() call, since IFF_PROMISC means that packets should not be filtered regardless of their MAC DA. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md modePeilin Ye4-8/+9
As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the following sequence of events: 1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link add ... external". "ip" ignores "[o]seq" if "external" is specified, so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e. it uses lockless TX); 2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g. bpf_skb_set_tunnel_key() in an eBPF program attached to this device; 3. gre_fb_xmit() or __gre6_xmit() processes these skb's: gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ^^^^^^^^^^^^^^^^^ Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by making o_seqno atomic_t. As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless xmit"), making o_seqno atomic_t increases "chance for packets being out of order at receiver" when NETIF_F_LLTX is on. Maybe a better fix would be: 1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if they want the kernel to allow sequencing of outgoing packets; 2. Reject all outgoing TUNNEL_SEQ packets if the device was not created with "oseq". Unfortunately, that would break userspace. We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us do it in separate patches to keep this fix minimal. Suggested-by: Jakub Kicinski <[email protected]> Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.") Signed-off-by: Peilin Ye <[email protected]> Acked-by: William Tu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25ip6_gre: Make o_seqno start from 0 in native modePeilin Ye1-6/+5
For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Peilin Ye <[email protected]> Acked-by: William Tu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25ip_gre: Make o_seqno start from 0 in native modePeilin Ye1-5/+3
For GRE and GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peilin Ye <[email protected]> Acked-by: William Tu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25net: lan966x: fix a couple off by one bugsDan Carpenter1-2/+2
The lan966x->ports[] array has lan966x->num_phys_ports elements. These are assigned in lan966x_probe(). That means the > comparison should be changed to >=. The first off by one check is harmless but the second one could lead to an out of bounds access and a crash. Fixes: 5ccd66e01cbe ("net: lan966x: add support for interrupts from analyzer") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25net/smc: sync err code when tcp connection was refusedliuyacan1-0/+2
In the current implementation, when TCP initiates a connection to an unavailable [ip,port], ECONNREFUSED will be stored in the TCP socket, but SMC will not. However, some apps (like curl) use getsockopt(,,SO_ERROR,,) to get the error information, which makes them miss the error message and behave strangely. Fixes: 50717a37db03 ("net/smc: nonblocking connect rework") Signed-off-by: liuyacan <[email protected]> Reviewed-by: Tony Lu <[email protected]> Acked-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25net: hns: Add missing fwnode_handle_put in hns_mac_initPeng Wu1-1/+5
In one of the error paths of the device_for_each_child_node() loop in hns_mac_init, add missing call to fwnode_handle_put. Signed-off-by: Peng Wu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25Merge branch 'hns3-fixes'David S. Miller4-55/+73
Guangbin Huang says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-04-25net: hns3: add return value for mailbox handling in PFJian Shen1-10/+12
Currently, there are some querying mailboxes sent from VF to PF, and VF will wait the PF's handling result. For mailbox HCLGE_MBX_GET_QID_IN_PF and HCLGE_MBX_GET_RSS_KEY, it may fail when the input parameter is invalid, but the prototype of their handler function is void. In this case, PF always return success to VF, which may cause the VF get incorrect result. Fixes it by adding return value for these function. Fixes: 63b1279d9905 ("net: hns3: check queue id range before using") Fixes: 532cfc0df1e4 ("net: hns3: add a check for index in hclge_get_rss_key()") Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25net: hns3: add validity check for message data lengthJian Shen1-0/+7
Add validity check for message data length in function hclge_send_mbx_msg(), avoid unexpected overflow. Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25net: hns3: modify the return code of hclge_get_ring_chain_from_mbxJie Wang1-1/+1
Currently, function hclge_get_ring_chain_from_mbx will return -ENOMEM if ring_num is bigger than HCLGE_MBX_MAX_RING_CHAIN_PARAM_NUM. It is better to return -EINVAL for the invalid parameter case. So this patch fixes it by return -EINVAL in this abnormal branch. Fixes: 5d02a58dae60 ("net: hns3: fix for buffer overflow smatch warning") Signed-off-by: Jie Wang <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25net: hns3: fix error log of tx/rx tqps statsPeng Li1-2/+2
The comments in function hclge_comm_tqps_update_stats is not right, so fix it. Fixes: 287db5c40d15 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse") Signed-off-by: Peng Li <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25net: hns3: align the debugfs output to the leftHao Chen1-42/+42
For debugfs node rx/tx_queue_info and rx/tx_bd_info, their output info is aligned to the right, it's not aligned with output of other debugfs node, so uniform their output info. Fixes: 907676b13071 ("net: hns3: use tx bounce buffer for small packets") Fixes: e44c495d95e0 ("net: hns3: refactor queue info of debugfs") Fixes: 77e9184869c9 ("net: hns3: refactor dump bd info of debugfs") Signed-off-by: Hao Chen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25net: hns3: clear inited state and stop client after failed to register netdevJian Shen1-0/+9
If failed to register netdev, it needs to clear INITED state and stop client in case of cause problem when concurrency with uninitialized process of driver. Fixes: a289a7e5c1d4 ("net: hns3: put off calling register_netdev() until client initialize complete") Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller4-4/+14
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix incorrect printing of memory size of IPVS connection hash table, from Pengcheng Yang. 2) Fix spurious EEXIST errors in nft_set_rbtree. 3) Remove leftover empty flowtable file, from Rongguang Wei. 4) Fix ip6_route_me_harder() with vrf driver, from Martin Willi. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-04-25netfilter: Update ip6_route_me_harder to consider L3 domainMartin Willi1-2/+8
The commit referenced below fixed packet re-routing if Netfilter mangles a routing key property of a packet and the packet is routed in a VRF L3 domain. The fix, however, addressed IPv4 re-routing, only. This commit applies the same behavior for IPv6. While at it, untangle the nested ternary operator to make the code more readable. Fixes: 6d8b49c3a3a3 ("netfilter: Update ip_route_me_harder to consider L3 domain") Cc: [email protected] Signed-off-by: Martin Willi <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-04-25netfilter: flowtable: Remove the empty fileRongguang Wei1-0/+0
CONFIG_NF_FLOW_TABLE_IPV4 is already removed and the real user is also removed(nf_flow_table_ipv4.c is empty). Fixes: c42ba4290b2147aa ("netfilter: flowtable: remove ipv4/ipv6 modules") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-04-25cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probeXiaobing Luo1-1/+3
-------------------------------------------- unreferenced object 0xffff000010742a00 (size 128): comm "swapper/0", pid 1, jiffies 4294902015 (age 1187.652s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000b4dfebaa>] __kmalloc+0x338/0x474 [<00000000d6e716db>] sun50i_cpufreq_nvmem_probe+0xc4/0x36c [<000000007d6082a0>] platform_probe+0x98/0x11c [<00000000c990f549>] really_probe+0x234/0x5a0 [<000000002d9fecc6>] __driver_probe_device+0x194/0x224 [<00000000cf0b94fa>] driver_probe_device+0x64/0x13c [<00000000f238e4cf>] __device_attach_driver+0xf8/0x180 [<000000006720e418>] bus_for_each_drv+0xf8/0x160 [<00000000df4f14f6>] __device_attach+0x174/0x29c [<00000000782002fb>] device_initial_probe+0x20/0x30 [<00000000c2681b06>] bus_probe_device+0xfc/0x110 [<00000000964cf3bd>] device_add+0x5f0/0xcd0 [<000000004b9264e3>] platform_device_add+0x198/0x390 [<00000000fa82a9d0>] platform_device_register_full+0x178/0x210 [<000000009a5daf13>] sun50i_cpufreq_init+0xf8/0x168 [<000000000377cc7c>] do_one_initcall+0xe4/0x570 -------------------------------------------- if sun50i_cpufreq_get_efuse failed, then opp_tables leak. Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver") Signed-off-by: Xiaobing Luo <[email protected]> Reviewed-by: Samuel Holland <[email protected]> Signed-off-by: Viresh Kumar <[email protected]>
2022-04-25drm/i915: Check EDID for HDR static metadata when choosing blcJouni Högander1-8/+26
We have now seen panel (XMG Core 15 e21 laptop) advertizing support for Intel proprietary eDP backlight control via DPCD registers, but actually working only with legacy pwm control. This patch adds panel EDID check for possible HDR static metadata and Intel proprietary eDP backlight control is used only if that exists. Missing HDR static metadata is ignored if user specifically asks for Intel proprietary eDP backlight control via enable_dpcd_backlight parameter. v2 : - Ignore missing HDR static metadata if Intel proprietary eDP backlight control is forced via i915.enable_dpcd_backlight - Printout info message if panel is missing HDR static metadata and support for Intel proprietary eDP backlight control is detected Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5284 Cc: Lyude Paul <[email protected]> Cc: Mika Kahola <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Filippo Falezza <[email protected]> Cc: [email protected] Signed-off-by: Jouni Högander <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Lyude Paul <[email protected]> (cherry picked from commit b4b157577cb1de13bee8bebc3576f1de6799a921) Signed-off-by: Joonas Lahtinen <[email protected]>
2022-04-25drm/i915: Fix DISP_POS_Y and DISP_HEIGHT definesHans de Goede1-2/+2
Commit 428cb15d5b00 ("drm/i915: Clean up pre-skl primary plane registers") introduced DISP_POS_Y and DISP_HEIGHT defines but accidentally set these their masks to REG_GENMASK(31, 0) instead of REG_GENMASK(31, 16). This breaks the primary display pane on at least pineview machines, fix the mask to fix the primary display pane only showing black. Tested on an Acer One AO532h with an Intel N450 SoC. Fixes: 428cb15d5b00 ("drm/i915: Clean up pre-skl primary plane registers") Cc: José Roberto de Souza <[email protected]> Cc: Ville Syrjälä <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: José Roberto de Souza <[email protected]> (cherry picked from commit 681f8a5c6e372dbfd2a313ace417e7749543de1d) Signed-off-by: Joonas Lahtinen <[email protected]>
2022-04-24Linux 5.18-rc4Linus Torvalds1-1/+1
2022-04-24Merge tag 'sched_urgent_for_v5.18_rc4' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Fix a corner case when calculating sched runqueue variables That fix also removes a check for a zero divisor in the code, without mentioning it. Vincent clarified that it's ok after I whined about it: https://lore.kernel.org/all/CAKfTPtD2QEyZ6ADd5WrwETMOX0XOwJGnVddt7VHgfURdqgOS-Q@mail.gmail.com/ * tag 'sched_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/pelt: Fix attach_entity_load_avg() corner case
2022-04-24Merge tag 'powerpc-5.18-3' of ↵Linus Torvalds6-66/+66
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Partly revert a change to our timer_interrupt() that caused lockups with high res timers disabled. - Fix a bug in KVM TCE handling that could corrupt kernel memory. - Two commits fixing Power9/Power10 perf alternative event selection. Thanks to Alexey Kardashevskiy, Athira Rajeev, David Gibson, Frederic Barrat, Madhavan Srinivasan, Miguel Ojeda, and Nicholas Piggin. * tag 'powerpc-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf: Fix 32bit compile powerpc/perf: Fix power10 event alternatives powerpc/perf: Fix power9 event alternatives KVM: PPC: Fix TCE handling for VFIO powerpc/time: Always set decrementer in timer_interrupt()
2022-04-24Merge tag 'perf_urgent_for_v5.18_rc4' of ↵Linus Torvalds4-9/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Add Sapphire Rapids CPU support - Fix a perf vmalloc-ed buffer mapping error (PERF_USE_VMALLOC in use) * tag 'perf_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/cstate: Add SAPPHIRERAPIDS_X CPU support perf/core: Fix perf_mmap fail when CONFIG_PERF_USE_VMALLOC enabled
2022-04-24Merge tag 'edac_urgent_for_v5.18_rc4' of ↵Linus Torvalds1-5/+11
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: - Read the reported error count from the proper register on synopsys_edac * tag 'edac_urgent_for_v5.18_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/synopsys: Read the error count from the correct register
2022-04-24kvmalloc: use vmalloc_huge for vmalloc allocationsLinus Torvalds1-2/+9
Since commit 559089e0a93d ("vmalloc: replace VM_NO_HUGE_VMAP with VM_ALLOW_HUGE_VMAP"), the use of hugepage mappings for vmalloc is an opt-in strategy, because it caused a number of problems that weren't noticed until x86 enabled it too. One of the issues was fixed by Nick Piggin in commit 3b8000ae185c ("mm/vmalloc: huge vmalloc backing pages should be split rather than compound"), but I'm still worried about page protection issues, and VM_FLUSH_RESET_PERMS in particular. However, like the hash table allocation case (commit f2edd118d02d: "page_alloc: use vmalloc_huge for large system hash"), the use of kvmalloc() should be safe from any such games, since the returned pointer might be a SLUB allocation, and as such no user should reasonably be using it in any odd ways. We also know that the allocations are fairly large, since it falls back to the vmalloc case only when a kmalloc() fails. So using a hugepage mapping seems both safe and relevant. This patch does show a weakness in the opt-in strategy: since the opt-in flag is in the 'vm_flags', not the usual gfp_t allocation flags, very few of the usual interfaces actually expose it. That's not much of an issue in this case that already used one of the fairly specialized low-level vmalloc interfaces for the allocation, but for a lot of other vmalloc() users that might want to opt in, it's going to be very inconvenient. We'll either have to fix any compatibility problems, or expose it in the gfp flags (__GFP_COMP would have made a lot of sense) to allow normal vmalloc() users to use hugepage mappings. That said, the cases that really matter were probably already taken care of by the hash tabel allocation. Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/all/CAHk-=whao=iosX1s5Z4SF-ZGa-ebAukJoAdUJFk5SPwnofV+Vg@mail.gmail.com/ Cc: Nicholas Piggin <[email protected]> Cc: Paul Menzel <[email protected]> Cc: Song Liu <[email protected]> Cc: Rick Edgecombe <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-04-24page_alloc: use vmalloc_huge for large system hashSong Liu1-1/+1
Use vmalloc_huge() in alloc_large_system_hash() so that large system hash (>= PMD_SIZE) could benefit from huge pages. Note that vmalloc_huge only allocates huge pages for systems with HAVE_ARCH_HUGE_VMALLOC. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Rik van Riel <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-04-24pinctrl: pistachio: fix use of irq_of_parse_and_map()Lv Ruyi1-3/+3
The irq_of_parse_and_map() function returns 0 on failure, and does not return an negative value. Fixes: cefc03e5995e ("pinctrl: Add Pistachio SoC pin control driver") Reported-by: Zeal Robot <[email protected]> Signed-off-by: Lv Ruyi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2022-04-23Merge tag '5.18-rc3-ksmbd-fixes' of git://git.samba.org/ksmbdLinus Torvalds8-66/+52
Pull ksmbd server fixes from Steve French: - cap maximum sector size reported to avoid mount problems - reference count fix - fix filename rename race * tag '5.18-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATION ksmbd: increment reference count of parent fp ksmbd: remove filename in ksmbd_file
2022-04-23Merge tag 'arc-5.18-rc4' of ↵Linus Torvalds9-27/+24
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - Assorted fixes * tag 'arc-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: remove redundant READ_ONCE() in cmpxchg loop ARC: atomic: cleanup atomic-llsc definitions arc: drop definitions of pgd_index() and pgd_offset{, _k}() entirely ARC: dts: align SPI NOR node name with dtschema ARC: Remove a redundant memset() ARC: fix typos in comments ARC: entry: fix syscall_trace_exit argument
2022-04-23sctp: check asoc strreset_chunk in sctp_generate_reconf_eventXin Long1-0/+4
A null pointer reference issue can be triggered when the response of a stream reconf request arrives after the timer is triggered, such as: send Incoming SSN Reset Request ---> CPU0: reconf timer is triggered, go to the handler code before hold sk lock <--- reply with Outgoing SSN Reset Request CPU1: process Outgoing SSN Reset Request, and set asoc->strreset_chunk to NULL CPU0: continue the handler code, hold sk lock, and try to hold asoc->strreset_chunk, crash! In Ying Xu's testing, the call trace is: [ ] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ ] RIP: 0010:sctp_chunk_hold+0xe/0x40 [sctp] [ ] Call Trace: [ ] <IRQ> [ ] sctp_sf_send_reconf+0x2c/0x100 [sctp] [ ] sctp_do_sm+0xa4/0x220 [sctp] [ ] sctp_generate_reconf_event+0xbd/0xe0 [sctp] [ ] call_timer_fn+0x26/0x130 This patch is to fix it by returning from the timer handler if asoc strreset_chunk is already set to NULL. Fixes: 7b9438de0cd4 ("sctp: add stream reconf timer") Reported-by: Ying Xu <[email protected]> Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-23Merge tag 'scsi-fixes' of ↵Linus Torvalds1-3/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One fix for an information leak caused by copying a buffer to userspace without checking for error first in the sr driver" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sr: Do not leak information in ioctl
2022-04-23Merge tag 'for-linus-5.18-rc4-tag' of ↵Linus Torvalds2-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "A simple cleanup patch and a refcount fix for Xen on Arm" * tag 'for-linus-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/xen: Fix some refcount leaks xen: Convert kmap() to kmap_local_page()
2022-04-23Merge tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds12-358/+94
Pull more drm fixes from Dave Airlie: "Maarten was away, so Maxine stepped up and sent me the drm-fixes merge, so no point leaving it for another week. The big change is an OF revert around bridge/panels, it may have some driver fallout, but hopefully this revert gets them shook out in the next week easier. Otherwise it's a bunch of locking/refcounts across drivers, a radeon dma_resv logic fix and some raspberry pi panel fixes. panel: - revert of patch that broke panel/bridge issues dma-buf: - remove unused header file. amdgpu: - partial revert of locking change radeon: - fix dma_resv logic inversion panel: - pi touchscreen panel init fixes vc4: - build fix - runtime pm refcount fix vmwgfx: - refcounting fix" * tag 'drm-fixes-2022-04-23' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: partial revert "remove ctx->lock" v2 Revert "drm: of: Lookup if child node has panel or bridge" Revert "drm: of: Properly try all possible cases for bridge/panel detection" drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage drm/vmwgfx: Fix gem refcounting and memory evictions drm/vc4: Fix build error when CONFIG_DRM_VC4=y && CONFIG_RASPBERRYPI_FIRMWARE=m drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised dma-buf-map: remove renamed header file drm/radeon: fix logic inversion in radeon_sync_resv
2022-04-23Merge tag 'input-for-v5.18-rc3' of ↵Linus Torvalds3-1/+36
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a new set of keycodes to be used by marine navigation systems - minor fixes to omap4-keypad and cypress-sf drivers * tag 'input-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: add Marine Navigation Keycodes Input: omap4-keypad - fix pm_runtime_get_sync() error checking Input: cypress-sf - register a callback to disable the regulators
2022-04-23Merge tag 'block-5.18-2022-04-22' of git://git.kernel.dk/linux-blockLinus Torvalds2-2/+2
Pull block fixes from Jens Axboe: "Just two small regression fixes for bcache" * tag 'block-5.18-2022-04-22' of git://git.kernel.dk/linux-block: bcache: fix wrong bdev parameter when calling bio_alloc_clone() in do_bio_hook() bcache: put bch_bio_map() back to correct location in journal_write_unlocked()
2022-04-23Merge tag 'io_uring-5.18-2022-04-22' of git://git.kernel.dk/linux-blockLinus Torvalds1-4/+7
Pull io_uring fixes from Jens Axboe: "Just two small fixes - one fixing a potential leak for the iovec for larger requests added in this cycle, and one fixing a theoretical leak with CQE_SKIP and IOPOLL" * tag 'io_uring-5.18-2022-04-22' of git://git.kernel.dk/linux-block: io_uring: fix leaks on IOPOLL and CQE_SKIP io_uring: free iovec if file assignment fails
2022-04-23Merge tag 'perf-tools-fixes-for-v5.18-2022-04-22' of ↵Linus Torvalds4-1/+23
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix header include for LLVM >= 14 when building with libclang. - Allow access to 'data_src' for auxtrace in 'perf script' with ARM SPE perf.data files, fixing processing data with such attributes. - Fix error message for test case 71 ("Convert perf time to TSC") on s390, where it is not supported. * tag 'perf-tools-fixes-for-v5.18-2022-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf test: Fix error message for test case 71 on s390, where it is not supported perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event perf script: Always allow field 'data_src' for auxtrace perf clang: Fix header include for LLVM >= 14
2022-04-23sparc: cacheflush_32.h needs struct pageRandy Dunlap1-0/+1
Add a struct page forward declaration to cacheflush_32.h. Fixes this build warning: CC drivers/crypto/xilinx/zynqmp-sha.o In file included from arch/sparc/include/asm/cacheflush.h:11, from include/linux/cacheflush.h:5, from drivers/crypto/xilinx/zynqmp-sha.c:6: arch/sparc/include/asm/cacheflush_32.h:38:37: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration 38 | void sparc_flush_page_to_ram(struct page *page); Exposed by commit 0e03b8fd2936 ("crypto: xilinx - Turn SHA into a tristate and allow COMPILE_TEST") but not Fixes: that commit because the underlying problem is older. Signed-off-by: Randy Dunlap <[email protected]> Reported-by: kernel test robot <[email protected]> Cc: Herbert Xu <[email protected]> Cc: David S. Miller <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: [email protected] Acked-by: Sam Ravnborg <[email protected]> Acked-by: Herbert Xu <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-04-23Merge tag 'drm-misc-fixes-2022-04-22' of ↵Dave Airlie12-358/+94
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Two fixes for the raspberrypi panel initialisation, one fix for a logic inversion in radeon, a build and pm refcounting fix for vc4, two reverts for drm_of_get_bridge that caused a number of regression and a locking regression for amdgpu. Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20220422084403.2xrhf3jusdej5yo4@houat
2022-04-22Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds9-26/+101
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Fix some syzbot-detected bugs, as well as other bugs found by I/O injection testing. Change ext4's fallocate to consistently drop set[ug]id bits when an fallocate operation might possibly change the user-visible contents of a file. Also, improve handling of potentially invalid values in the the s_overhead_cluster superblock field to avoid ext4 returning a negative number of free blocks" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: fix a potential race while discarding reserved buffers after an abort ext4: update the cached overhead value in the superblock ext4: force overhead calculation if the s_overhead_cluster makes no sense ext4: fix overhead calculation to account for the reserved gdt blocks ext4, doc: fix incorrect h_reserved size ext4: limit length to bitmap_maxbytes - blocksize in punch_hole ext4: fix use-after-free in ext4_search_dir ext4: fix bug_on in start_this_handle during umount filesystem ext4: fix symlink file size not match to file content ext4: fix fallocate to use file_modified to update permissions consistently
2022-04-22Merge tag 'ata-5.18-rc4' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fix from Damien Le Moal: "A single fix to avoid a NULL pointer dereference in the pata_marvell driver with adapters not supporting DMA, from Zheyu" * tag 'ata-5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_marvell: Check the 'bmdma_addr' beforing reading
2022-04-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds36-252/+316
Pull kvm fixes from Paolo Bonzini: "The main and larger change here is a workaround for AMD's lack of cache coherency for encrypted-memory guests. I have another patch pending, but it's waiting for review from the architecture maintainers. RISC-V: - Remove 's' & 'u' as valid ISA extension - Do not allow disabling the base extensions 'i'/'m'/'a'/'c' x86: - Fix NMI watchdog in guests on AMD - Fix for SEV cache incoherency issues - Don't re-acquire SRCU lock in complete_emulated_io() - Avoid NULL pointer deref if VM creation fails - Fix race conditions between APICv disabling and vCPU creation - Bugfixes for disabling of APICv - Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume selftests: - Do not use bitfields larger than 32-bits, they differ between GCC and clang" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: selftests: introduce and use more page size-related constants kvm: selftests: do not use bitfields larger than 32-bits for PTEs KVM: SEV: add cache flush to solve SEV cache incoherency issues KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUs KVM: SVM: Simplify and harden helper to flush SEV guest page(s) KVM: selftests: Silence compiler warning in the kvm_page_table_test KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdog x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resume KVM: SPDX style and spelling fixes KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabled KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a race KVM: nVMX: Defer APICv updates while L2 is active until L1 is active KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabled KVM: Initialize debugfs_dentry when a VM is created to avoid NULL deref KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copy KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io() RISC-V: KVM: Restrict the extensions that can be disabled RISC-V: KVM: Remove 's' & 'u' as valid ISA extension
2022-04-22net: ethernet: stmmac: fix write to sgmii_adapter_baseDinh Nguyen1-5/+7
I made a mistake with the commit a6aaa0032424 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link"). I should have tested against both scenario of having a SGMII interface and one without. Without the SGMII PCS TSE adpater, the sgmii_adapter_base address is NULL, thus a write to this address will fail. Cc: [email protected] Fixes: a6aaa0032424 ("net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link") Signed-off-by: Dinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-22Merge branch 'wireguard-patches-for-5-18-rc4'Jakub Kicinski3-1/+4
Jason A. Donenfeld says: ==================== wireguard patches for 5.18-rc4 Here are two small wireguard fixes for 5.18-rc4: 1) We enable ACPI in the QEMU test harness, so that multiple CPUs are actually used on x86 for testing for races. 2) Sending skbs with metadata dsts attached resulted in a null pointer dereference, triggerable from executing eBPF programs. The fix is a oneliner, changing a skb_dst() null check into a skb_valid_dst() boolean check. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-22wireguard: device: check for metadata_dst with skb_valid_dst()Nikolay Aleksandrov1-1/+2
When we try to transmit an skb with md_dst attached through wireguard we hit a null pointer dereference in wg_xmit() due to the use of dst_mtu() which calls into dst_blackhole_mtu() which in turn tries to dereference dst->dev. Since wireguard doesn't use md_dsts we should use skb_valid_dst(), which checks for DST_METADATA flag, and if it's set, then falls back to wireguard's device mtu. That gives us the best chance of transmitting the packet; otherwise if the blackhole netdev is used we'd get ETH_MIN_MTU. [ 263.693506] BUG: kernel NULL pointer dereference, address: 00000000000000e0 [ 263.693908] #PF: supervisor read access in kernel mode [ 263.694174] #PF: error_code(0x0000) - not-present page [ 263.694424] PGD 0 P4D 0 [ 263.694653] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 263.694876] CPU: 5 PID: 951 Comm: mausezahn Kdump: loaded Not tainted 5.18.0-rc1+ #522 [ 263.695190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014 [ 263.695529] RIP: 0010:dst_blackhole_mtu+0x17/0x20 [ 263.695770] Code: 00 00 00 0f 1f 44 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 47 10 48 83 e0 fc 8b 40 04 85 c0 75 09 48 8b 07 <8b> 80 e0 00 00 00 c3 66 90 0f 1f 44 00 00 48 89 d7 be 01 00 00 00 [ 263.696339] RSP: 0018:ffffa4a4422fbb28 EFLAGS: 00010246 [ 263.696600] RAX: 0000000000000000 RBX: ffff8ac9c3553000 RCX: 0000000000000000 [ 263.696891] RDX: 0000000000000401 RSI: 00000000fffffe01 RDI: ffffc4a43fb48900 [ 263.697178] RBP: ffffa4a4422fbb90 R08: ffffffff9622635e R09: 0000000000000002 [ 263.697469] R10: ffffffff9b69a6c0 R11: ffffa4a4422fbd0c R12: ffff8ac9d18b1a00 [ 263.697766] R13: ffff8ac9d0ce1840 R14: ffff8ac9d18b1a00 R15: ffff8ac9c3553000 [ 263.698054] FS: 00007f3704c337c0(0000) GS:ffff8acaebf40000(0000) knlGS:0000000000000000 [ 263.698470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 263.698826] CR2: 00000000000000e0 CR3: 0000000117a5c000 CR4: 00000000000006e0 [ 263.699214] Call Trace: [ 263.699505] <TASK> [ 263.699759] wg_xmit+0x411/0x450 [ 263.700059] ? bpf_skb_set_tunnel_key+0x46/0x2d0 [ 263.700382] ? dev_queue_xmit_nit+0x31/0x2b0 [ 263.700719] dev_hard_start_xmit+0xd9/0x220 [ 263.701047] __dev_queue_xmit+0x8b9/0xd30 [ 263.701344] __bpf_redirect+0x1a4/0x380 [ 263.701664] __dev_queue_xmit+0x83b/0xd30 [ 263.701961] ? packet_parse_headers+0xb4/0xf0 [ 263.702275] packet_sendmsg+0x9a8/0x16a0 [ 263.702596] ? _raw_spin_unlock_irqrestore+0x23/0x40 [ 263.702933] sock_sendmsg+0x5e/0x60 [ 263.703239] __sys_sendto+0xf0/0x160 [ 263.703549] __x64_sys_sendto+0x20/0x30 [ 263.703853] do_syscall_64+0x3b/0x90 [ 263.704162] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 263.704494] RIP: 0033:0x7f3704d50506 [ 263.704789] Code: 48 c7 c0 ff ff ff ff eb b7 66 2e 0f 1f 84 00 00 00 00 00 90 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 72 c3 90 55 48 83 ec 30 44 89 4c 24 2c 4c 89 [ 263.705652] RSP: 002b:00007ffe954b0b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 263.706141] RAX: ffffffffffffffda RBX: 0000558bb259b490 RCX: 00007f3704d50506 [ 263.706544] RDX: 000000000000004a RSI: 0000558bb259b7b2 RDI: 0000000000000003 [ 263.706952] RBP: 0000000000000000 R08: 00007ffe954b0b90 R09: 0000000000000014 [ 263.707339] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe954b0b90 [ 263.707735] R13: 000000000000004a R14: 0000558bb259b7b2 R15: 0000000000000001 [ 263.708132] </TASK> [ 263.708398] Modules linked in: bridge netconsole bonding [last unloaded: bridge] [ 263.708942] CR2: 00000000000000e0 Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Link: https://github.com/cilium/cilium/issues/19428 Reported-by: Martynas Pumputis <[email protected]> Signed-off-by: Nikolay Aleksandrov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-22wireguard: selftests: enable ACPI for SMPJason A. Donenfeld2-0/+2
It turns out that by having CONFIG_ACPI=n, we've been failing to boot additional CPUs, and so these systems were functionally UP. The code bloat is unfortunate for build times, but I don't see an alternative. So this commit sets CONFIG_ACPI=y for x86_64 and i686 configs. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-22tcp: ensure to use the most recently sent skb when filling the rate samplePengcheng Yang2-3/+14
If an ACK (s)acks multiple skbs, we favor the information from the most recently sent skb by choosing the skb with the highest prior_delivered count. But in the interval between receiving ACKs, we send multiple skbs with the same prior_delivered, because the tp->delivered only changes when we receive an ACK. We used RACK's solution, copying tcp_rack_sent_after() as tcp_skb_sent_after() helper to determine "which packet was sent last?". Later, we will use tcp_skb_sent_after() instead in RACK. Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Pengcheng Yang <[email protected]> Cc: Paolo Abeni <[email protected]> Acked-by: Neal Cardwell <[email protected]> Tested-by: Neal Cardwell <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-22net: dsa: realtek: remove realtek,rtl8367s stringLuiz Angelo Daros de Luca2-5/+0
There is no need to add new compatible strings for each new supported chip version. The compatible string is used only to select the subdriver (rtl8365mb.c or rtl8366rb.c). Once in the subdriver, it will detect the chip model by itself, ignoring which compatible string was used. Link: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Luiz Angelo Daros de Luca <[email protected]> Reviewed-by: Alvin Šipraga <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Acked-by: Arınç ÜNAL <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.