aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-07-14media: dt-bindings: media: add TI DS90UB953 FPD-Link III SerializerTomi Valkeinen1-0/+134
Add DT bindings for TI DS90UB953 FPD-Link III Serializer. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: dt-bindings: media: add TI DS90UB913 FPD-Link III SerializerTomi Valkeinen1-0/+133
Add DT bindings for TI DS90UB913 FPD-Link III Serializer. Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: add I2C Address Translator (ATR) supportLuca Ceresoli7-0/+941
An ATR is a device that looks similar to an i2c-mux: it has an I2C slave "upstream" port and N master "downstream" ports, and forwards transactions from upstream to the appropriate downstream port. But it is different in that the forwarded transaction has a different slave address. The address used on the upstream bus is called the "alias" and is (potentially) different from the physical slave address of the downstream chip. Add a helper file (just like i2c-mux.c for a mux or switch) to allow implementing ATR features in a device driver. The helper takes care of adapter creation/destruction and translates addresses at each transaction. Signed-off-by: Luca Ceresoli <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Acked-by: Wolfram Sang <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: dt-bindings: i2c: Add I2C Address Translator (ATR)Tomi Valkeinen1-0/+34
Add bindings for I2C Address Translator. Only one property is added, 'i2c-alias-pool', which can be used in the bindings for the device that supports ATR. Signed-off-by: Tomi Valkeinen <[email protected]> Acked-by: Wolfram Sang <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: tvp5150: check return value of devm_kasprintf()Claudiu Beznea1-0/+4
devm_kasprintf() returns a pointer to dynamically allocated memory. Pointer could be NULL in case allocation fails. Check pointer validity. Identified with coccinelle (kmerr.cocci script). Fixes: 0556f1d580d4 ("media: tvp5150: add input source selection of_graph support") Signed-off-by: Claudiu Beznea <[email protected]> Reviewed-by: Marco Felsch <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: ov13b10: add PM control support based on power resourcesBingbu Cao1-10/+110
On ACPI based platforms, the ov13b10 camera sensor need to be powered up by acquire the PM resource from INT3472. INT3472 will register one regulator 'avdd', one reset gpio and clock source for ov13b10. Add 2 power interfaces that are registered as runtime PM callbacks. Signed-off-by: Bingbu Cao <[email protected]> Signed-off-by: Hao Yao <[email protected]> Suggested-by: Hans de Goede <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: ad5820: Drop unsupported ad5823 from i2c_ and of_device_id tablesHans de Goede1-2/+0
The supported ad5820 and ad5821 VCMs both use a single 16 bit register which is written by sending 2 bytes with the data directly after sending the i2c-client address. The ad5823 OTOH has a more typical i2c / smbus device setup with multiple 8 bit registers where the first byte send after the i2c-client address is the register address and the actual data only starts from the second byte after the i2c-client address. The ad5823 i2c_ and of_device_id-s was added at the same time as the ad5821 ids with as rationale: """ Some camera modules also refer that AD5823 is a replacement of AD5820: https://download.kamami.com/p564094-OV8865_DS.pdf """ The AD5823 may be an electrical and functional replacement of the AD5820, but from a software pov it is not compatible at all and it is going to need its own driver, drop its id from the ad5820 driver. Fixes: b8bf73136bae ("media: ad5820: Add support for ad5821 and ad5823") Cc: Pavel Machek <[email protected]> Cc: Ricardo Ribalda Delgado <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Ricardo Ribalda <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: imx290: drop format param from imx290_ctrl_updateTommaso Merciai1-5/+2
The format param actually is not used in imx290_ctrl_update function, let's drop this Fixes: bc35f9a21a55 ("media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s") Signed-off-by: Tommaso Merciai <[email protected]> Reviewed-by: Dave Stevenson <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: ov13b10: support new ACPI HID 'OVTI13B1'Bingbu Cao1-0/+1
On ACPI systems, the HID of ov13b10 is 'OVTI13B1', add this new HID in acpi IDs table to make driver support it. Signed-off-by: Hao Yao <[email protected]> Signed-off-by: Bingbu Cao <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: MAINTAINERS: Orphan the OV7740 driverNicolas Ferre1-2/+1
Wenyou's email is bouncing, remove him from this camera driver's entry and mark it as orphan. Signed-off-by: Nicolas Ferre <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: ov13b10: Defer probe if no endpoint foundBingbu Cao1-4/+4
The ov13b10 need be connected to a CIO2 or IPU device by bridge, sometimes the bridge driver was not probed before ov13b10 driver, then the absence of the fwnode endpoint for this device is expected, so driver return -EPROBE_DEFER in this case to let the probe occur after bridge driver. Signed-off-by: Hao Yao <[email protected]> Signed-off-by: Bingbu Cao <[email protected]> Reviewed-by: Tommaso Merciai <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: ov5640: fix low resolution image abnormal issueGuoniu.zhou1-4/+3
OV5640 will output abnormal image data when work at low resolution (320x240, 176x144 and 160x120) after switching from high resolution, such as 1080P, the time interval between high and low switching must be less than 1000ms in order to OV5640 don't enter suspend state during the time. The reason is by 0x3824 value don't restore to initialize value when do resolution switching. In high resolution setting array, 0x3824 is set to 0x04, but low resolution setting array remove 0x3824 in commit db15c1957a2d ("media: ov5640: Remove duplicated mode settings"). So when do resolution switching from high to low, such as 1080P to 320x240, and the time interval is less than auto suspend delay time which means global initialize setting array will not be loaded, the output image data are abnormal. Hence move 0x3824 from ov5640_init_setting[] table to ov5640_setting_low_res[] table and also move 0x4407 0x460b, 0x460c to avoid same issue. Fixes: db15c1957a2d ("media: ov5640: Remove duplicated mode settings") Signed-off-by: Guoniu.zhou <[email protected]> Reviewed-by: Jacopo Mondi <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: ov08x40: Fix hblank out of range issueJason Chen1-7/+7
The HTS value cannot be directly compared to the sensor's output size. It needs to be converted to an absolute time unit. Additionally, the hblank value need to be modified as it was previous invalid. Signed-off-by: Jason Chen <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: Remove Shawn's and Chiranjeevi's e-mail addressesSakari Ailus11-11/+11
Remove Shawn Tu's and Chiranjeevi Rapolu's e-mail addresses as they are no longer function. Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: MAINTAINERS: Pick ov5670 maintenanceSakari Ailus1-1/+1
Chiranjeevi's e-mail is bouncing: [email protected] DM3NAM02FT041.mail.protection.outlook.com Remote Server returned '550 5.4.1 Recipient address rejected: Access denied. AS(201806281)' Assign the driver to myself. Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: MAINTAINERS: Orphan dw9768 and ov02a10 driversSakari Ailus1-4/+2
Dongchun's e-mail is no longer active and he hasn't given a new one: The following message to <[email protected]> was undeliverable. The reason for the problem: 5.1.0 - Unknown address error 550-'Relaying mail to [email protected] is not allowed' Mark the drivers as orphaned. Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: MAINTAINERS: Add an entry for V4L2 sensor and lens driversSakari Ailus1-0/+16
I maintain V4L2 sensor and lens drivers but there hasn't been a specific MAINTAINERS entry for them. Add it now. Signed-off-by: Sakari Ailus <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: MAINTAINERS: Assign Shawn Tu's sensor drivers to myselfSakari Ailus1-5/+5
Shawn Tu's e-mail address is bouncing: [email protected] Remote Server returned '550 5.1.10 RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address lookup' Assign the sensor drivers Shawn maintained to myself. Reported-by: Conor Dooley <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: ipu3-cio2: rename ipu3-cio2-main.c back to ipu3-cio2.cBingbu Cao2-2/+0
cio2 bridge driver is moved out of ipu3, current ipu3 cio2 driver only has 1 source file, then we can rename the source file back to ipu3-cio2.c. Signed-off-by: Bingbu Cao <[email protected]> Reviewed-by: Daniel Scally <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: ipu-bridge: use IPU_MAX_PORTS for bridge instead of CIO2_NUM_PORTSBingbu Cao2-4/+3
Before bridge driver use CIO2_NUM_PORTS as the maximum supported CSI2 port number. Current bridge driver is moved out of ipu3, so define a new macro in ipu bridge for all IPUs instead of including CIO2 definition. This patch also removes the ipu3-cio2.h inclusion in ipu-bridge.h. Signed-off-by: Bingbu Cao <[email protected]> Reviewed-by: Daniel Scally <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: ipu3-cio2: rename cio2 bridge to ipu bridge and move out of ipu3Bingbu Cao9-143/+147
cio2 bridge was involved along with IPU3. However, in fact all Intel IPUs besides IPU3 CIO2 need this bridge driver. This patch move bridge driver out of ipu3 directory and rename as ipu-bridge. Then it can be worked with IPU3 and other Intel IPUs. Signed-off-by: Bingbu Cao <[email protected]> Reviewed-by: Daniel Scally <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: cadence: Add support for JH7110 SoCJack Zhu1-0/+1
Add support for Starfive JH7110 SoC which has the cadence csi2 receiver. Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Jack Zhu <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: cadence: Add support for external dphyJack Zhu1-10/+56
Add support for external MIPI D-PHY. Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Jack Zhu <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: cadence: Add operation on resetJack Zhu1-5/+35
Add operation on reset for Cadence MIPI-CSI2 RX Controller. Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Jack Zhu <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: dt-bindings: cadence-csi2rx: Add resets propertyJack Zhu1-0/+24
Add resets property for Cadence MIPI-CSI2 RX controller Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Jack Zhu <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: dt-bindings: cadence-csi2rx: Convert to DT schemaJack Zhu3-100/+178
Convert DT bindings document for Cadence MIPI-CSI2 RX controller to DT schema format. For compatible, new compatibles should not be messed with conversion, but the original binding did not specify any SoC-specific compatible string, so add the StarFive compatible string. Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Jack Zhu <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: max9286: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/max9286.c:1707:34: error: ‘max9286_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: ov7740: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/ov7740.c:1203:34: error: ‘ov7740_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: ov2680: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/ov2680.c:1149:34: error: ‘ov2680_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: ov2640: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/ov2640.c:1290:34: error: ‘ov2640_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: mt9m111: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/mt9m111.c:1370:34: error: ‘mt9m111_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: i2c: isl7998x: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/i2c/isl7998x.c:1557:34: error: ‘isl7998x_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: platform: mdp: mark OF related data as maybe unusedKrzysztof Kozlowski1-1/+1
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/media/platform/mediatek/mdp/mtk_mdp_core.c:31:34: error: ‘mtk_mdp_comp_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: platform: sun8i-a83t-mipi-csi2: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c:818:34: error: ‘sun8i_a83t_mipi_csi2_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Paul Kocialkowski <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: platform: sun6i-mipi-csi2: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c:751:34: error: ‘sun6i_mipi_csi2_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Reviewed-by: Paul Kocialkowski <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: platform: sun6i-csi: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:401:34: error: ‘sun6i_csi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Paul Kocialkowski <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: platform: mdp3: mark OF related data as maybe unusedKrzysztof Kozlowski1-1/+1
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/media/platform/mediatek/mdp3/mtk-mdp3-comp.c:627:34: error: ‘mdp_sub_comp_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: platform: mdp3: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/mediatek/mdp3/mtk-mdp3-core.c:49:34: error: ‘mdp_of_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: platform: marvell: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/marvell/mmp-driver.c:364:34: error: ‘mmpcam_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: platform: verisilicon: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/verisilicon/hantro_drv.c:622:34: error: ‘of_hantro_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: platform: ti: am437x: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/ti/am437x/am437x-vpfe.c:2620:34: error: ‘vpfe_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: platform: samsung: s5p-jpeg: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/samsung/s5p-jpeg/jpeg-core.c:3124:34: error: ‘samsung_jpeg_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Andrzej Pietrasiewicz <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: platform: intel: pxa: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/intel/pxa_camera.c:2449:34: error: ‘pxa_camera_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: platform: allegro-dvt: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/platform/allegro-dvt/allegro-core.c:3995:34: error: ‘allegro_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Michael Tretter <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: rc: ir-rx51: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/rc/ir-rx51.c:264:34: error: ‘ir_rx51_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Sean Young <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: rc: gpio-ir-tx: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/rc/gpio-ir-tx.c:24:34: error: ‘gpio_ir_tx_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Sean Young <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: rc: gpio-ir-recv: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/rc/gpio-ir-recv.c:197:34: error: ‘gpio_ir_recv_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Sean Young <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: cec: tegra: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/media/cec/platform/tegra/tegra_cec.c:457:34: error: ‘tegra_cec_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Hans Verkuil <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: cec: meson: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/media/cec/platform/meson/ao-cec.c:711:34: error: ‘meson_ao_cec_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Martin Blumenstingl <[email protected]> Reviewed-by: Hans Verkuil <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2023-07-14media: cec: ch7322: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/media/cec/i2c/ch7322.c:583:34: error: ‘ch7322_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Hans Verkuil <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.