aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-10-18Merge tag 'firewire-update' of ↵Linus Torvalds1-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fixlet from Stefan Richter: "IEEE 1394 subsystem patch: catch an initialization error in the packet sniffer nosy" * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: nosy: do not ignore errors in ioremap_nocache()
2016-10-18Merge tag 'drm-fixes-for-v4.9-rc2' of ↵Linus Torvalds27-131/+232
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Just had a couple of amdgpu fixes and one core fix I wanted to get out early to fix some regressions. I'm sure I'll have more stuff this week for -rc2" * tag 'drm-fixes-for-v4.9-rc2' of git://people.freedesktop.org/~airlied/linux: (22 commits) drm: Print device information again in debugfs drm/amd/powerplay: fix bug stop dpm can't work on Vi. drm/amd/powerplay: notify smu no display by default. drm/amdgpu/dpm: implement thermal sensor for CZ/ST drm/amdgpu/powerplay: implement thermal sensor for CZ/ST drm/amdgpu: disable smu hw first on tear down drm/amdgpu: fix amdgpu_need_full_reset (v2) drm/amdgpu/si_dpm: Limit clocks on HD86xx part drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c drm/amdgpu: potential NULL dereference in debugfs code drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c drm/amd/powerplay: fix static checker warnings in iceland_smc.c drm/radeon: change vblank_time's calculation method to reduce computational error. drm/amdgpu: change vblank_time's calculation method to reduce computational error. drm/amdgpu: clarify UVD/VCE special handling for CG drm/amd/amdgpu: enable clockgating only after late init drm/radeon: allow TA_CS_BC_BASE_ADDR on SI drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init drm/amdgpu/gfx8: fix CGCG_CGLS handling drm/radeon: fix modeset tear down code ...
2016-10-18pinctrl: intel: Only restore pins that are used by the driverMika Westerberg1-2/+23
Dell XPS 13 (and maybe some others) uses a GPIO (CPU_GP_1) during suspend to explicitly disable USB touchscreen interrupt. This is done to prevent situation where the lid is closed the touchscreen is left functional. The pinctrl driver (wrongly) assumes it owns all pins which are owned by host and not locked down. It is perfectly fine for BIOS to use those pins as it is also considered as host in this context. What happens is that when the lid of Dell XPS 13 is closed, the BIOS configures CPU_GP_1 low disabling the touchscreen interrupt. During resume we restore all host owned pins to the known state which includes CPU_GP_1 and this overwrites what the BIOS has programmed there causing the touchscreen to fail as no interrupts are reaching the CPU anymore. Fix this by restoring only those pins we know are explicitly requested by the kernel one way or other. Cc: [email protected] Link: https://bugzilla.kernel.org/show_bug.cgi?id=176361 Reported-by: AceLan Kao <[email protected]> Tested-by: AceLan Kao <[email protected]> Signed-off-by: Mika Westerberg <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-10-18pinctrl: baytrail: Fix lockdepVille Syrjälä1-1/+2
Initialize the spinlock before using it. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.8.0-dwc-bisect #4 Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.1403240443 FFD8_X64_R_2014_13_1_00 03/24/2014 0000000000000000 ffff8800788ff770 ffffffff8133d597 0000000000000000 0000000000000000 ffff8800788ff7e0 ffffffff810cfb9e 0000000000000002 ffff8800788ff7d0 ffffffff8205b600 0000000000000002 ffff8800788ff7f0 Call Trace: [<ffffffff8133d597>] dump_stack+0x67/0x90 [<ffffffff810cfb9e>] register_lock_class+0x52e/0x540 [<ffffffff810d2081>] __lock_acquire+0x81/0x16b0 [<ffffffff810cede1>] ? save_trace+0x41/0xd0 [<ffffffff810d33b2>] ? __lock_acquire+0x13b2/0x16b0 [<ffffffff810cf05a>] ? __lock_is_held+0x4a/0x70 [<ffffffff810d3b1a>] lock_acquire+0xba/0x220 [<ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80 [<ffffffff81631567>] _raw_spin_lock_irqsave+0x47/0x60 [<ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80 [<ffffffff8136f1fe>] byt_gpio_get_direction+0x3e/0x80 [<ffffffff813740a9>] gpiochip_add_data+0x319/0x7d0 [<ffffffff81631723>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffff8136fe3b>] byt_pinctrl_probe+0x2fb/0x620 [<ffffffff8142fb0c>] platform_drv_probe+0x3c/0xa0 ... Based on the diff it looks like the problem was introduced in commit 71e6ca61e826 ("pinctrl: baytrail: Register pin control handling") but I wasn't able to verify that empirically as the parent commit just oopsed when I tried to boot it. Cc: Cristina Ciocan <[email protected]> Cc: [email protected] Fixes: 71e6ca61e826 ("pinctrl: baytrail: Register pin control handling") Signed-off-by: Ville Syrjälä <[email protected]> Acked-by: Mika Westerberg <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-10-18pinctrl: aspeed-g5: Fix pin association of SPI1 functionAndrew Jeffery2-9/+81
The SPI1 function was associated with the wrong pins: The functions that those pins provide is either an SPI debug or passthrough function coupled to SPI1. Make the SPI1 mux function configure the relevant pins and associate new SPI1DEBUG and SPI1PASSTHRU functions with the pins that were already defined. The notation used in the datasheet's multi-function pin table for the SoC is often creative: in this case the SYS* signals are enabled by a single bit, which is nothing unusual on its own, but in this case the bit was also participating in a multi-bit bitfield and therefore represented multiple functions. This fact was overlooked in the original patch. Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver) Signed-off-by: Andrew Jeffery <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-10-18pinctrl: aspeed-g5: Fix GPIOE1 typoAndrew Jeffery1-1/+1
This prevented C20 from successfully being muxed as GPIO. Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver) Signed-off-by: Andrew Jeffery <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-10-18pinctrl: aspeed-g5: Fix names of GPID2 pinsAndrew Jeffery1-6/+6
Fixes simple typos in the initial commit. There is no behavioural change. Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver) Reported-by: Xo Wang <[email protected]> Signed-off-by: Andrew Jeffery <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-10-18pinctrl: aspeed: "Not enabled" is a significant mux stateAndrew Jeffery1-5/+7
Consider a scenario with one pin P that has two signals A and B, where A is defined to be higher priority than B: That is, if the mux IP is in a state that would consider both A and B to be active on P, then A will be the active signal. To instead configure B as the active signal we must configure the mux so that A is inactive. The mux state for signals can be described by logical operations on one or more bits from one or more registers (a "signal expression"), which in some cases leads to aliased mux states for a particular signal. Further, signals described by multi-bit bitfields often do not only need to record the states that would make them active (the "enable" expressions), but also the states that makes them inactive (the "disable" expressions). All of this combined leads to four possible states for a signal: 1. A signal is active with respect to an "enable" expression 2. A signal is not active with respect to an "enable" expression 3. A signal is inactive with respect to a "disable" expression 4. A signal is not inactive with respect to a "disable" expression In the case of P, if we are looking to activate B without explicitly having configured A it's enough to consider A inactive if all of A's "enable" signal expressions evaluate to "not active". If any evaluate to "active" then the corresponding "disable" states must be applied so it becomes inactive. For example, on the AST2400 the pins composing GPIO bank H provide signals ROMD8 through ROMD15 (high priority) and those for UART6 (low priority). The mux states for ROMD8 through ROMD15 are aliased, i.e. there are two mux states that result in the respective signals being configured: A. SCU90[6]=1 B. Strap[4,1:0]=100 Further, the second mux state is a 3-bit bitfield that explicitly defines the enabled state but the disabled state is implicit, i.e. if Strap[4,1:0] is not exactly "100" then ROMD8 through ROMD15 are not considered active. This requires the mux function evaluation logic to use approach 2. above, however the existing code was using approach 3. The problem was brought to light on the Palmetto machines where the strap register value is 0x120ce416, and prevented GPIO requests in bank H from succeeding despite the hardware being in a position to allow them. Fixes: 318398c09a8d ("pinctrl: Add core pinctrl support for Aspeed SoCs") Signed-off-by: Andrew Jeffery <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-10-18locking, fs/locks: Add missing file_sem locksPeter Zijlstra1-0/+6
I overlooked a few code-paths that can lead to locks_delete_global_locks(). Reported-by: Dmitry Vyukov <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Cc: Al Viro <[email protected]> Cc: Bruce Fields <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: syzkaller <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-10-18locking/rwsem/x86: Add stack frame dependency for ____down_write()Josh Poimboeuf1-2/+4
Arnd reported the following objtool warning: kernel/locking/rwsem.o: warning: objtool: down_write_killable()+0x16: call without frame pointer save/setup The warning means gcc placed the ____down_write() inline asm (and its call instruction) before the frame pointer setup in down_write_killable(), which breaks frame pointer convention and can result in incorrect stack traces. Force the stack frame to be created before the call instruction by listing the stack pointer as an output operand in the inline asm statement. Reported-by: Arnd Bergmann <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/1188b7015f04baf361e59de499ee2d7272c59dce.1476393828.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2016-10-17btrfs: assign error values to the correct bio structsJunjie Mao1-2/+2
Fixes: 4246a0b63bd8 ("block: add a bi_error field to struct bio") Signed-off-by: Junjie Mao <[email protected]> Acked-by: David Sterba <[email protected]> Cc: [email protected] # 4.3+ Signed-off-by: Linus Torvalds <[email protected]>
2016-10-17x86, pkeys: remove cruft from never-merged syscallsDave Hansen2-4/+0
pkey_set() and pkey_get() were syscalls present in older versions of the protection keys patches. The syscall number definitions were inadvertently left in place. This patch removes them. I did a git grep and verified that these are the last places in the tree that these appear, save for the protection_keys.c tests and Documentation. Those spots talk about functions called pkey_get/set() which are wrappers for the direct PKRU instructions, not the syscalls. Signed-off-by: Dave Hansen <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Fixes: f9afc6197e9bb ("x86: Wire up protection keys system calls") Signed-off-by: Linus Torvalds <[email protected]>
2016-10-17generic syscalls: kill cruft from removed pkey syscallsDave Hansen2-7/+0
pkey_set() and pkey_get() were syscalls present in older versions of the protection keys patches. They were fully excised from the x86 code, but some cruft was left in the generic syscall code. The C++ comments were intended to help to make it more glaring to me to fix them before actually submitting them. That technique worked, but later than I would have liked. I test-compiled this for arm64. Fixes: a60f7b69d92c0 ("generic syscalls: Wire up memory protection keys syscalls") Signed-off-by: Dave Hansen <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2016-10-17Merge tag 'perf-urgent-for-mingo-20161017' of ↵Ingo Molnar4-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix handling of NUMA nodes in perf.data files (Jiri Olsa) - Fix scrolling when refreshing 'perf top --tui --hierarchy' entries (Namhyung Kim) - Fix building of JIT support on Ubuntu 16.04 (Anton Blanchard) - Fix handling of events including .c and .o, that were being treated as BPF scripts instead of vendor ones (Wang Nan) Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2016-10-17perf jit: Fix build issue on UbuntuAnton Blanchard1-1/+1
When building on Ubuntu 16.04, I get the following error: Makefile:49: *** the openjdk development package appears to me missing, install and try again. Stop. The problem is that update-java-alternatives has multiple spaces between fields, and cut treats each space as a new delimiter: java-1.8.0-openjdk-ppc64el 1081 /usr/lib/jvm/java-1.8.0-openjdk-ppc64el Fix this by using awk, which handles this fine. Signed-off-by: Anton Blanchard <[email protected]> Reviewed-by: Stephane Eranian <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-17perf jevents: Handle events including .c and .oWang Nan1-2/+2
This patch helps with Sukadev's vendor event tree where such events can happen. >From Andi Kleen: Any event including a .c/.o/.bpf currently triggers BPF compilation or loading and then an error. This can happen for some Intel vendor events, which cannot be used. This patch fixes this problem by forbidding BPF file patch containing '{', '}' and ',', make sure flex consumes the leading '{', instead of matching it using a BPF file path. Tested result: $ perf stat -e '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' -a -I 1000 invalid or unsupported event: '{unc_p_clockticks,unc_p_power_state_occupancy.cores_c0}' Run 'perf list' for a list of valid events (as expected, interperted as event) $ perf stat -e 'aaa.c' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory (as expected, interpreted as BPF source) $ perf stat -e 'aaa.ccc' -a -I 1000 invalid or unsupported event: 'aaa.ccc' (as expected, interpreted as event) $ perf stat -e '{aaa.c}' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory event syntax error: '{aaa.c}' <SKIP> (as expected, interpreted as BPF source) $ perf stat -e '{cycles,aaa.c}' -a -I 1000 ERROR: problems with path aaa.c: No such file or directory event syntax error: '{cycles,aaa.c}' (as expected, interpreted as BPF source) Signed-off-by: Wang Nan <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Reported-by: Andi Kleen <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Sukadev Bhattiprolu <[email protected]> Cc: Zefan Li <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-10-17alarmtimer: Remove unused but set variableTobias Klauser1-2/+0
Remove the set but unused variable base in alarm_clock_get to fix the following warning when building with 'W=1': kernel/time/alarmtimer.c: In function ‘alarm_timer_create’: kernel/time/alarmtimer.c:545:21: warning: variable ‘base’ set but not used [-Wunused-but-set-variable] Signed-off-by: Tobias Klauser <[email protected]> Cc: John Stultz <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2016-10-17Merge branch 'mm/pkeys' into x86/urgent, to pick up pkeys fixIngo Molnar0-0/+0
Signed-off-by: Ingo Molnar <[email protected]>
2016-10-17perf/x86/intel/uncore: Add Knights Mill CPUIDPiotr Luc1-0/+1
Add Knights Mill (KNM) to the list of CPUIDs supported by PMU. Signed-off-by: Piotr Luc <[email protected]> Reviewed-by: Dave Hansen <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-10-17perf/x86/intel/rapl: Add Knights Mill CPUIDPiotr Luc1-0/+1
Add Knights Mill (KNM) to the list of CPUIDs supported by rapl. Signed-off-by: Piotr Luc <[email protected]> Reviewed-by: Dave Hansen <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-10-17perf/x86/intel: Add Knights Mill CPUIDPiotr Luc1-1/+2
Add Knights Mill (KNM) to the list of CPUIDs supported by PMU. Signed-off-by: Piotr Luc <[email protected]> Reviewed-by: Dave Hansen <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-10-17x86/cpu/intel: Add Knights Mill to Intel familyPiotr Luc1-0/+1
Add CPUID of Knights Mill (KNM) processor to Intel family list. Signed-off-by: Piotr Luc <[email protected]> Reviewed-by: Dave Hansen <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-10-17drm: Print device information again in debugfsDaniel Vetter1-4/+0
I was a bit over-eager in my cleanup in commit 95c081c17f284de50eaca60d4d55643a64d39019 Author: Daniel Vetter <[email protected]> Date: Tue Jun 21 10:54:12 2016 +0200 drm: Move master pointer from drm_minor to drm_device Noticed by Chris Wilson. Fixes: 95c081c17f28 ("drm: Move master pointer from drm_minor to drm_device") Cc: Chris Wilson <[email protected]> Cc: Chris Wilson <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Emil Velikov <[email protected]> Cc: Julia Lawall <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Tested-by: Chris Wilson <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2016-10-17Merge branch 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie26-127/+232
into drm-next Fixes for radeon and amdgpu for 4.9: - allow an additional reg in the SI reg checker - fix thermal sensor readback on CZ/ST - misc bug fixes * 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (21 commits) drm/amd/powerplay: fix bug stop dpm can't work on Vi. drm/amd/powerplay: notify smu no display by default. drm/amdgpu/dpm: implement thermal sensor for CZ/ST drm/amdgpu/powerplay: implement thermal sensor for CZ/ST drm/amdgpu: disable smu hw first on tear down drm/amdgpu: fix amdgpu_need_full_reset (v2) drm/amdgpu/si_dpm: Limit clocks on HD86xx part drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c drm/amdgpu: potential NULL dereference in debugfs code drm/amd/powerplay: fix static checker warnings in smu7_hwmgr.c drm/amd/powerplay: fix static checker warnings in iceland_smc.c drm/radeon: change vblank_time's calculation method to reduce computational error. drm/amdgpu: change vblank_time's calculation method to reduce computational error. drm/amdgpu: clarify UVD/VCE special handling for CG drm/amd/amdgpu: enable clockgating only after late init drm/radeon: allow TA_CS_BC_BASE_ADDR on SI drm/amdgpu: initialize the context reset_counter in amdgpu_ctx_init drm/amdgpu/gfx8: fix CGCG_CGLS handling drm/radeon: fix modeset tear down code drm/radeon: fix up dp aux tear down (v2) ...
2016-10-16perf/x86/intel: Remove an inconsistent NULL checkDan Carpenter1-2/+2
Smatch complains that we don't check "event->ctx" consistently. It's never NULL so we can just remove the check. Signed-off-by: Dan Carpenter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: David Carrillo-Cisneros <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-10-16Merge tag 'v4.9-rc1' into x86/urgent, to pick up updatesIngo Molnar9729-333529/+582947
Signed-off-by: Ingo Molnar <[email protected]>
2016-10-16x86/e820: Don't merge consecutive E820_PRAM rangesDan Williams1-1/+1
Commit: 917db484dc6a ("x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation") ... fixed up the broken manipulations of max_pfn in the presence of E820_PRAM ranges. However, it also broke the sanitize_e820_map() support for not merging E820_PRAM ranges. Re-introduce the enabling to keep resource boundaries between consecutive defined ranges. Otherwise, for example, an environment that boots with memmap=2G!8G,2G!10G will end up with a single 4G /dev/pmem0 device instead of a /dev/pmem0 and /dev/pmem1 device 2G in size. Reported-by: Dave Chinner <[email protected]> Signed-off-by: Dan Williams <[email protected]> Cc: <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Jeff Moyer <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Zhang Yi <[email protected]> Cc: [email protected] Fixes: 917db484dc6a ("x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation") Link: http://lkml.kernel.org/r/147629530854.10618.10383744751594021268.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar <[email protected]>
2016-10-16cpu/hotplug: Use distinct name for cpu_hotplug.dep_mapJoonas Lahtinen1-1/+1
Use distinctive name for cpu_hotplug.dep_map to avoid the actual cpu_hotplug.lock appearing as cpu_hotplug.lock#2 in lockdep splats. Signed-off-by: Joonas Lahtinen <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Acked-by: Gautham R. Shenoy <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Gautham R . Shenoy <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-10-16kprobes: Unpoison stack in jprobe_return() for KASANDmitry Vyukov4-4/+26
I observed false KSAN positives in the sctp code, when sctp uses jprobe_return() in jsctp_sf_eat_sack(). The stray 0xf4 in shadow memory are stack redzones: [ ] ================================================================== [ ] BUG: KASAN: stack-out-of-bounds in memcmp+0xe9/0x150 at addr ffff88005e48f480 [ ] Read of size 1 by task syz-executor/18535 [ ] page:ffffea00017923c0 count:0 mapcount:0 mapping: (null) index:0x0 [ ] flags: 0x1fffc0000000000() [ ] page dumped because: kasan: bad access detected [ ] CPU: 1 PID: 18535 Comm: syz-executor Not tainted 4.8.0+ #28 [ ] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ ] ffff88005e48f2d0 ffffffff82d2b849 ffffffff0bc91e90 fffffbfff10971e8 [ ] ffffed000bc91e90 ffffed000bc91e90 0000000000000001 0000000000000000 [ ] ffff88005e48f480 ffff88005e48f350 ffffffff817d3169 ffff88005e48f370 [ ] Call Trace: [ ] [<ffffffff82d2b849>] dump_stack+0x12e/0x185 [ ] [<ffffffff817d3169>] kasan_report+0x489/0x4b0 [ ] [<ffffffff817d31a9>] __asan_report_load1_noabort+0x19/0x20 [ ] [<ffffffff82d49529>] memcmp+0xe9/0x150 [ ] [<ffffffff82df7486>] depot_save_stack+0x176/0x5c0 [ ] [<ffffffff817d2031>] save_stack+0xb1/0xd0 [ ] [<ffffffff817d27f2>] kasan_slab_free+0x72/0xc0 [ ] [<ffffffff817d05b8>] kfree+0xc8/0x2a0 [ ] [<ffffffff85b03f19>] skb_free_head+0x79/0xb0 [ ] [<ffffffff85b0900a>] skb_release_data+0x37a/0x420 [ ] [<ffffffff85b090ff>] skb_release_all+0x4f/0x60 [ ] [<ffffffff85b11348>] consume_skb+0x138/0x370 [ ] [<ffffffff8676ad7b>] sctp_chunk_put+0xcb/0x180 [ ] [<ffffffff8676ae88>] sctp_chunk_free+0x58/0x70 [ ] [<ffffffff8677fa5f>] sctp_inq_pop+0x68f/0xef0 [ ] [<ffffffff8675ee36>] sctp_assoc_bh_rcv+0xd6/0x4b0 [ ] [<ffffffff8677f2c1>] sctp_inq_push+0x131/0x190 [ ] [<ffffffff867bad69>] sctp_backlog_rcv+0xe9/0xa20 [ ... ] [ ] Memory state around the buggy address: [ ] ffff88005e48f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] ffff88005e48f400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] >ffff88005e48f480: f4 f4 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] ^ [ ] ffff88005e48f500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] ffff88005e48f580: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ ] ================================================================== KASAN stack instrumentation poisons stack redzones on function entry and unpoisons them on function exit. If a function exits abnormally (e.g. with a longjmp like jprobe_return()), stack redzones are left poisoned. Later this leads to random KASAN false reports. Unpoison stack redzones in the frames we are going to jump over before doing actual longjmp in jprobe_return(). Signed-off-by: Dmitry Vyukov <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: Will Deacon <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Ananth N Mavinakayanahalli <[email protected]> Cc: Anil S Keshavamurthy <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-10-16kprobes: Avoid false KASAN reports during stack copyDmitry Vyukov1-3/+4
Kprobes save and restore raw stack chunks with memcpy(). With KASAN these chunks can contain poisoned stack redzones, as the result memcpy() interceptor produces false stack out-of-bounds reports. Use __memcpy() instead of memcpy() for stack copying. __memcpy() is not instrumented by KASAN and does not lead to the false reports. Currently there is a spew of KASAN reports during boot if CONFIG_KPROBES_SANITY_TEST is enabled: [ ] Kprobe smoke test: started [ ] ================================================================== [ ] BUG: KASAN: stack-out-of-bounds in setjmp_pre_handler+0x17c/0x280 at addr ffff88085259fba8 [ ] Read of size 64 by task swapper/0/1 [ ] page:ffffea00214967c0 count:0 mapcount:0 mapping: (null) index:0x0 [ ] flags: 0x2fffff80000000() [ ] page dumped because: kasan: bad access detected [...] Reported-by: CAI Qian <[email protected]> Tested-by: CAI Qian <[email protected]> Signed-off-by: Dmitry Vyukov <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ananth N Mavinakayanahalli <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Anil S Keshavamurthy <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: David S. Miller <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] [ Improved various details. ] Signed-off-by: Ingo Molnar <[email protected]>
2016-10-16objtool: Skip all "unreachable instruction" warnings for gcov kernelsJosh Poimboeuf1-31/+26
Recently objtool has started reporting a few "unreachable instruction" warnings when CONFIG_GCOV is enabled for newer versions of GCC. Usually this warning means there's some new control flow that objtool doesn't understand. But in this case, objtool is correct and the instructions really are inaccessible. It's an annoying quirk of gcov, but it's harmless, so it's ok to just silence the warnings. With older versions of GCC, it was relatively easy to detect gcov-specific instructions and to skip any unreachable warnings produced by them. But GCC 6 has gotten craftier. Instead of continuing to play whack-a-mole with gcov, just use a bigger, more permanent hammer and disable unreachable warnings for the whole file when gcov is enabled. This is fine to do because a) unreachable warnings are usually of questionable value; and b) gcov isn't used for production kernels and we can relax the checks a bit there. Reported-by: kbuild test robot <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/38d5c87d61d9cd46486dd2c86f46603dff0df86f.1476393584.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2016-10-16objtool: Improve rare switch jump table pattern detectionJosh Poimboeuf1-2/+9
GCC 6 added a new switch statement jump table optimization which makes objtool's life harder. It looks like: mov [rodata addr],%reg1 ... some instructions ... jmpq *(%reg1,%reg2,8) The optimization is quite rare, but objtool still needs to be able to identify the pattern so that it can follow all possible control flow paths related to the switch statement. In order to detect the pattern, objtool starts from the indirect jump and scans backwards through the function until it finds the first instruction in the pattern. If it encounters an unconditional jump along the way, it stops and considers the pattern to be not found. As it turns out, unconditional jumps can happen, as long as they are small forward jumps within the range being scanned. This fixes the following warnings: drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x2f4: sibling call from callable instruction with changed frame pointer drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0x10f: sibling call from callable instruction with changed frame pointer Reported-by: Arnd Bergmann <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/8a9ed68ae1780e8d3963e4ee13f2f257fe3a3c33.1476393584.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2016-10-15Linux 4.9-rc1Linus Torvalds1-2/+2
2016-10-15Merge tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befsLinus Torvalds8-283/+244
Pull befs fixes from Luis de Bethencourt: "I recently took maintainership of the befs file system [0]. This is the first time I send you a git pull request, so please let me know if all the below is OK. Salah Triki and myself have been cleaning the code and fixing a few small bugs. Sorry I couldn't send this sooner in the merge window, I was waiting to have my GPG key signed by kernel members at ELCE in Berlin a few days ago." [0] https://lkml.org/lkml/2016/7/27/502 * tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befs: (39 commits) befs: befs: fix style issues in datastream.c befs: improve documentation in datastream.c befs: fix typos in datastream.c befs: fix typos in btree.c befs: fix style issues in super.c befs: fix comment style befs: add check for ag_shift in superblock befs: dump inode_size superblock information befs: remove unnecessary initialization befs: fix typo in befs_sb_info befs: add flags field to validate superblock state befs: fix typo in befs_find_key befs: remove unused BEFS_BT_PARMATCH fs: befs: remove ret variable fs: befs: remove in vain variable assignment fs: befs: remove unnecessary *befs_sb variable fs: befs: remove useless initialization to zero fs: befs: remove in vain variable assignment fs: befs: Insert NULL inode to dentry fs: befs: Remove useless calls to brelse in befs_find_brun_dblindirect ...
2016-10-15Merge tag 'gcc-plugins-v4.9-rc1' of ↵Linus Torvalds24-22/+725
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc plugins update from Kees Cook: "This adds a new gcc plugin named "latent_entropy". It is designed to extract as much possible uncertainty from a running system at boot time as possible, hoping to capitalize on any possible variation in CPU operation (due to runtime data differences, hardware differences, SMP ordering, thermal timing variation, cache behavior, etc). At the very least, this plugin is a much more comprehensive example for how to manipulate kernel code using the gcc plugin internals" * tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: latent_entropy: Mark functions with __latent_entropy gcc-plugins: Add latent_entropy plugin
2016-10-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds226-3657/+5242
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
2016-10-15Merge tag 'sound-fix-4.9-rc1' of ↵Linus Torvalds5-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few trivial small fixes" * tag 'sound-fix-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: line6: fix a crash in line6_hwdep_write() ALSA: seq: fix passing wrong pointer in function call of compatibility layer ALSA: hda - Fix a failure of micmute led when having multi adcs ALSA: line6: Fix POD X3 Live audio input
2016-10-15pkeys: Remove easily triggered WARNDave Jones1-1/+0
This easy-to-trigger warning shows up instantly when running Trinity on a kernel with CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS disabled. At most this should have been a printk, but the -EINVAL alone should be more than adequate indicator that something isn't available. Signed-off-by: Dave Jones <[email protected]> Acked-by: Dave Hansen <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2016-10-14Merge branch 'for-linus' of ↵Linus Torvalds14-98/+133
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more misc uaccess and vfs updates from Al Viro: "The rest of the stuff from -next (more uaccess work) + assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: score: traps: Add missing include file to fix build error fs/super.c: don't fool lockdep in freeze_super() and thaw_super() paths fs/super.c: fix race between freeze_super() and thaw_super() overlayfs: Fix setting IOP_XATTR flag iov_iter: kernel-doc import_iovec() and rw_copy_check_uvector() blackfin: no access_ok() for __copy_{to,from}_user() arm64: don't zero in __copy_from_user{,_inatomic} arm: don't zero in __copy_from_user_inatomic()/__copy_from_user() arc: don't leak bits of kernel stack into coredump alpha: get rid of tail-zeroing in __copy_user()
2016-10-14Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds19-296/+824
Pull cifs fixes from Steve French: "Including: - nine bug fixes for stable. Some of these we found at the recent two weeks of SMB3 test events/plugfests. - significant improvements in reconnection (e.g. if server or network crashes) especially when mounted with "persistenthandles" or to server which advertises Continuous Availability on the share. - a new mount option "idsfromsid" which improves POSIX compatibility in some cases (when winbind not configured e.g.) by better (and faster) fetching uid/gid from acl (when "cifsacl" mount option is enabled). NB: we are almost complete work on "cifsacl" (querying mode/uid/gid from ACL) for SMB3, but SMB3 support for cifsacl is not included in this set. - improved handling for SMB3 "credits" (even if server is buggy) Still working on two sets of changes: - cifsacl enablement for SMB3 - cleanup of RFC1001 length calculation (so we can handle encryption and multichannel and RDMA) And a couple of new bugs were reported recently (unrelated to above) so will probably have another merge request next week" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (21 commits) CIFS: Retrieve uid and gid from special sid if enabled CIFS: Add new mount option to set owner uid and gid from special sids in acl CIFS: Reset read oplock to NONE if we have mandatory locks after reopen CIFS: Fix persistent handles re-opening on reconnect SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup SMB2: Separate Kerberos authentication from SMB2_sess_setup Expose cifs module parameters in sysfs Cleanup missing frees on some ioctls Enable previous version support Do not send SMB3 SET_INFO request if nothing is changing SMB3: Add mount parameter to allow user to override max credits fs/cifs: reopen persistent handles on reconnect Clarify locking of cifs file and tcon structures and make more granular Fix regression which breaks DFS mounting fs/cifs: keep guid when assigning fid to fileinfo SMB3: GUIDs should be constructed as random but valid uuids Set previous session id correctly on SMB3 reconnect cifs: Limit the overall credit acquired Display number of credits available Add way to query creation time of file via cifs xattr ...
2016-10-14Merge branch 'for-linus-4.9' of ↵Linus Torvalds8-157/+272
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Some fixes from Omar and Dave Sterba for our new free space tree. This isn't heavily used yet, but as we move toward making it the new default we wanted to nail down an endian bug" * 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: tests: uninline member definitions in free_space_extent btrfs: tests: constify free space extent specs Btrfs: expand free space tree sanity tests to catch endianness bug Btrfs: fix extent buffer bitmap tests on big-endian systems Btrfs: catch invalid free space trees Btrfs: fix mount -o clear_cache,space_cache=v2 Btrfs: fix free space tree bitmaps on big-endian systems
2016-10-14Merge branch 'work.uaccess' into for-linusAl Viro9-78/+47
2016-10-14score: traps: Add missing include file to fix build errorGuenter Roeck1-0/+1
score images fail to build as follows. arch/score/kernel/traps.c: In function 'show_stack': arch/score/kernel/traps.c:55:3: error: implicit declaration of function '__get_user' __get_user() is declared in asm/uaccess.h, which was previously included through asm/module.h. Cc: Al Viro <[email protected]> Fixes: 88dd4a748da7 ("score: separate extable.h, switch module.h to it") Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Al Viro <[email protected]>
2016-10-14fs/super.c: don't fool lockdep in freeze_super() and thaw_super() pathsOleg Nesterov1-12/+25
sb_wait_write()->percpu_rwsem_release() fools lockdep to avoid the false-positives. Now that xfs was fixed by Dave's commit dbad7c993053 ("xfs: stop holding ILOCK over filldir callbacks") we can remove it and change freeze_super() and thaw_super() to run with s_writers.rw_sem locks held; we add two trivial helpers for that, lockdep_sb_freeze_release() and lockdep_sb_freeze_acquire(). xfstests-dev/check `grep -il freeze tests/*/???` does not trigger any warning from lockdep. Signed-off-by: Oleg Nesterov <[email protected]> Signed-off-by: Al Viro <[email protected]>
2016-10-14Merge branch 'overlayfs-linus' of ↵Linus Torvalds6-93/+82
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs updates from Miklos Szeredi: "This update contains fixes to the "use mounter's permission to access underlying layers" area, and miscellaneous other fixes and cleanups. No new features this time" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: use vfs_get_link() vfs: add vfs_get_link() helper ovl: use generic_readlink ovl: explain error values when removing acl from workdir ovl: Fix info leak in ovl_lookup_temp() ovl: during copy up, switch to mounter's creds early ovl: lookup: do getxattr with mounter's permission ovl: copy_up_xattr(): use strnlen
2016-10-14fs/super.c: fix race between freeze_super() and thaw_super()Oleg Nesterov1-3/+3
Change thaw_super() to check frozen != SB_FREEZE_COMPLETE rather than frozen == SB_UNFROZEN, otherwise it can race with freeze_super() which drops sb->s_umount after SB_FREEZE_WRITE to preserve the lock ordering. In this case thaw_super() will wrongly call s_op->unfreeze_fs() before it was actually frozen, and call sb_freeze_unlock() which leads to the unbalanced percpu_up_write(). Unfortunately lockdep can't detect this, so this triggers misc BUG_ON()'s in kernel/rcu/sync.c. Reported-and-tested-by: Nikolay Borisov <[email protected]> Signed-off-by: Oleg Nesterov <[email protected]> Cc: [email protected] Signed-off-by: Al Viro <[email protected]>
2016-10-14overlayfs: Fix setting IOP_XATTR flagVivek Goyal1-5/+6
ovl_fill_super calls ovl_new_inode to create a root inode for the new superblock before initializing sb->s_xattr. This wrongly causes IOP_XATTR to be cleared in i_opflags of the new inode, causing SELinux to log the following message: SELinux: (dev overlay, type overlay) has no xattr support Fix this by initializing sb->s_xattr and similar fields before calling ovl_new_inode. Signed-off-by: Andreas Gruenbacher <[email protected]> Signed-off-by: Al Viro <[email protected]>
2016-10-14iov_iter: kernel-doc import_iovec() and rw_copy_check_uvector()Vegard Nossum2-0/+51
Both import_iovec() and rw_copy_check_uvector() take an array (typically small and on-stack) which is used to hold an iovec array copy from userspace. This is to avoid an expensive memory allocation in the fast path (i.e. few iovec elements). The caller may have to check whether these functions actually used the provided buffer or allocated a new one -- but this differs between the too. Let's just add a kernel doc to clarify what the semantics are for each function. Signed-off-by: Vegard Nossum <[email protected]> Signed-off-by: Al Viro <[email protected]>
2016-10-14Merge tag 'linux-kselftest-4.9-rc1-update' of ↵Linus Torvalds105-186/+202
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: "This update consists of: - Fixes and improvements to existing tests - Moving code from Documentation to selftests, samples, and tools: * Moves dnotify_test, prctl, ptp, vDSO, ia64, watchdog, and networking tests from Documentation to selftests. * Moves mic/mpssd, misc-devices/mei, timers, watchdog, auxdisplay, and blackfin examples from Documentation to samples. * Moves accounting, laptops/dslm, and pcmcia/crc32hash tools from Documentation to tools. * Deletes BUILD_DOCSRC and its dependencies" * tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits) selftests/futex: Check ANSI terminal color support Doc: update 00-INDEX files to reflect the runnable code move samples: move blackfin gptimers-example from Documentation tools: move pcmcia crc32hash tool from Documentation tools: move laptops dslm tool from Documentation tools: move accounting tool from Documentation samples: move auxdisplay example code from Documentation samples: move watchdog example code from Documentation samples: move timers example code from Documentation samples: move misc-devices/mei example code from Documentation samples: move mic/mpssd example code from Documentation selftests: Move networking/timestamping from Documentation selftests: move watchdog tests from Documentation/watchdog selftests: move ia64 tests from Documentation/ia64 selftests: move vDSO tests from Documentation/vDSO selftests: move ptp tests from Documentation/ptp selftests: move prctl tests from Documentation/prctl selftests: move dnotify_test from Documentation/filesystems selftests/timers: Add missing error code assignment before test selftests/zram: replace ZRAM_LZ4_COMPRESS ...
2016-10-14Merge branch 'misc' of ↵Linus Torvalds4-12/+80
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull misc kbuild changes from Michal Marek: "Just a few patches on the kbuild.git#misc branch this time: - New Coccinelle patch by Nicholas Mc Guire - Existing patch fixes by Julia Lawall - Minor comment fix by Markus Elfring" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Coccinelle: flag conditions with no effect scripts/coccicheck: Update reference for the corresponding documentation Coccinelle: pm_runtime: ensure relevance of pm_runtime reports Coccinelle: limit memdup_user transformation to GFP_KERNEL case
Powered by cgit, Gruvboxed by Blaster4385.