aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-05-16net/mlx5_core: Use a macro in mlx5_command_str()Amir Vadai1-171/+132
Use a macro instead of copying the OP name. Signed-off-by: Amir Vadai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16net/sched: cls_flower: Hardware offloaded filters statistics supportAmir Vadai2-0/+22
Introduce a new command in ndo_setup_tc() for hardware offloaded filters, to call the NIC driver, and make it update the statistics. This will be done before dumping the filter and its statistics. Signed-off-by: Amir Vadai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16net/sched: act_gact: Update statistics when offloaded to hardwareAmir Vadai1-0/+15
Implement the stats_update callback that will be called by NIC drivers for hardware offloaded filters. Signed-off-by: Amir Vadai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16net/sched: Enable netdev drivers to update statistics of offloaded actionsAmir Vadai2-2/+30
Introduce stats_update callback. netdev driver could call it for offloaded actions to update the basic statistics (packets, bytes and last use). Since bstats_update() and bstats_cpu_update() use skb as an argument to get the counters, _bstats_update() and _bstats_cpu_update(), that get bytes and packets as arguments, were added. Signed-off-by: Amir Vadai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16Merge branch 'pxa168_eth-perf'David S. Miller1-6/+6
Jisheng Zhang says: ==================== net: pxa168_eth: improve performance This series is to improve the pxa168_eth driver performance by using {readl|writel}_relaxed or appropriate memory barriers. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-05-16net: pxa168_eth: Use dma_wmb/rmb where appropriateJisheng Zhang1-4/+4
Update the pxa168_eth driver to use the dma_rmb/wmb calls instead of the full barriers in order to improve performance: reduced 97ns/39ns on average in tx/rx path on Marvell BG4CT platform. Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16net: pxa168_eth: use {readl|writel}_relaxed instead of readl/writelJisheng Zhang1-2/+2
Since appropriate memory barriers are already there, use the relaxed version to improve performance a bit. Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16vxlan: set mac_header correctly in GPE modeJiri Benc1-0/+1
For VXLAN-GPE, the interface is ARPHRD_NONE, thus we need to reset mac_header after pulling the outer header. v2: Put the code to the existing conditional block as suggested by Shmulik Ladkani. Fixes: e1e5314de08b ("vxlan: implement GPE") Signed-off-by: Jiri Benc <[email protected]> Reviewed-by: Shmulik Ladkani <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16Merge branch 'xen-netback-control-ring'David S. Miller6-43/+879
Paul Durrant says: ==================== xen-netback: support for control ring My recent patch to import an up-to-date include/xen/interface/io/netif.h from the Xen Project brought in the necessary definitions to support the new control shared ring and protocol. This patch series updates xen-netback to support the new ring. Patch #1 adds the necessary boilerplate to map the control ring and handle messages. No implementation of the new protocol is included in this patch so that it can be kept to a reasonable size. Patch #2 adds the protocol implementation. Patch #3 adds support for passing has values calculated by xen-netback to capable frontends. Patch #4 adds support for accepting hash values calculated by capable frontends and using them the set the socket buffer hash. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-05-16xen-netback: use hash value from the frontendPaul Durrant1-0/+27
My recent patch to include/xen/interface/io/netif.h defines a new extra info type that can be used to pass hash values between backend and guest frontend. This patch adds code to xen-netback to use the value in a hash extra info fragment passed from the guest frontend in a transmit-side (i.e. netback receive side) packet to set the skb hash accordingly. Signed-off-by: Paul Durrant <[email protected]> Acked-by: Wei Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16xen-netback: pass hash value to the frontendPaul Durrant2-14/+77
My recent patch to include/xen/interface/io/netif.h defines a new extra info type that can be used to pass hash values between backend and guest frontend. This patch adds code to xen-netback to pass hash values calculated for guest receive-side packets (i.e. netback transmit side) to the frontend. Signed-off-by: Paul Durrant <[email protected]> Acked-by: Wei Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16xen-netback: add control protocol implementationPaul Durrant5-3/+502
My recent patch to include/xen/interface/io/netif.h defines a new shared ring (in addition to the rx and tx rings) for passing control messages from a VM frontend driver to a backend driver. A previous patch added the necessary boilerplate for mapping the control ring from the frontend, should it be created. This patch adds implementations for each of the defined protocol messages. Signed-off-by: Paul Durrant <[email protected]> Cc: Wei Liu <[email protected]> Acked-by: Wei Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16xen-netback: add control ring boilerplatePaul Durrant4-30/+277
My recent patch to include/xen/interface/io/netif.h defines a new shared ring (in addition to the rx and tx rings) for passing control messages from a VM frontend driver to a backend driver. This patch adds the necessary code to xen-netback to map this new shared ring, should it be created by a frontend, but does not add implementations for any of the defined protocol messages. These are added in a subsequent patch for clarity. Signed-off-by: Paul Durrant <[email protected]> Acked-by: Wei Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16Merge branch 'cls_u32_hw_sw'David S. Miller3-12/+57
Sridhar Samudrala says: ==================== Enable SW only or HW only offloads with u32 classifier This set of patches export TCA_CLS_FLAGS_SKIP_HW to userspace and also introduces another flag TCA_CLS_FLAGS_SKIP_SW. These flags enable offloading u32 filters to either SW or HW only. The default semantics with no flags is to add the filter to HW if possible and also into SW. With SKIP_HW flag, the filter is only added to SW. With SKIP_SW flag, the filter is added to HW and an error is returned to user on failure. These flags are mutually exclusive. There was an earlier discussion on these semantics in the following email thread. http://thread.gmane.org/gmane.linux.network/401733 ==================== Signed-off-by: David S. Miller <[email protected]>
2016-05-16net: cls_u32: Add support for skip-sw flag to tc u32 classifier.Samudrala, Sridhar3-9/+54
On devices that support TC U32 offloads, this flag enables a filter to be added only to HW. skip-sw and skip-hw are mutually exclusive flags. By default without any flags, the filter is added to both HW and SW, but no error checks are done in case of failure to add to HW. With skip-sw, failure to add to HW is treated as an error. Here is a sample script that adds 2 filters, one with skip-sw and the other with skip-hw flag. # add ingress qdisc tc qdisc add dev p4p1 ingress # enable hw tc offload. ethtool -K p4p1 hw-tc-offload on # add u32 filter with skip-sw flag. tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: flowid 800:1 \ skip-sw \ match ip src 192.168.1.0/24 \ action drop # add u32 filter with skip-hw flag. tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: flowid 800:2 \ skip-hw \ match ip src 192.168.2.0/24 \ action drop Signed-off-by: Sridhar Samudrala <[email protected]> Acked-by: John Fastabend <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16net: sched: Move TCA_CLS_FLAGS_SKIP_HW to uapi header file.Samudrala, Sridhar2-3/+3
Signed-off-by: Sridhar Samudrala <[email protected]> Acked-by: John Fastabend <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16Merge branch 'hv_netvsc-races'David S. Miller4-198/+215
Vitaly Kuznetsov says: ==================== hv_netvsc: avoid races on mtu change/set channels Changes since v1: - Rebased to net-next [Haiyang Zhang] Original description: MTU change and set channels operations are implemented as netvsc device re-creation destroying internal structures (struct net_device stays). This is really unfortunate but there is no support from Hyper-V host to do it in a different way. Such re-creation is unsurprisingly racy, Haiyang reported a crash when netvsc_change_mtu() is racing with netvsc_link_change() but I was able to identify additional races upon investigation. Both netvsc_set_channels() and netvsc_change_mtu() race against: 1) netvsc_link_change() 2) netvsc_remove() 3) netvsc_send() To solve these issues without introducing new locks some refactoring is required. We need to get rid of very complex link graph in all the internal structures and avoid traveling through structures which are being removed. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-05-16hv_netvsc: set nvdev link after populating chn_tableVitaly Kuznetsov1-11/+18
Crash in netvsc_send() is observed when netvsc device is re-created on mtu change/set channels. The crash is caused by dereferencing of NULL channel pointer which comes from chn_table. The root cause is a mixture of two facts: - we set nvdev pointer in net_device_context in alloc_net_device() before we populate chn_table. - we populate chn_table[0] only. The issue could be papered over by checking channel != NULL in netvsc_send() but populating the whole chn_table and writing the nvdev pointer afterwards seems more appropriate. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16hv_netvsc: synchronize netvsc_change_mtu()/netvsc_set_channels() with ↵Vitaly Kuznetsov1-2/+7
netvsc_remove() When netvsc device is removed during mtu change or channels setup we get into troubles as both paths are trying to remove the device. Synchronize them with start_remove flag and rtnl lock. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16hv_netvsc: get rid of struct net_device pointer in struct netvsc_deviceVitaly Kuznetsov4-64/+72
Simplify netvsvc pointer graph by getting rid of the redundant ndev pointer. We can always get a pointer to struct net_device from somewhere else. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16hv_netvsc: untangle the pointer messVitaly Kuznetsov4-122/+99
We have the following structures keeping netvsc adapter state: - struct net_device - struct net_device_context - struct netvsc_device - struct rndis_device - struct hv_device and there are pointers/dependencies between them: - struct net_device_context is contained in struct net_device - struct hv_device has driver_data pointer which points to 'struct net_device' OR 'struct netvsc_device' depending on driver's state (!). - struct net_device_context has a pointer to 'struct hv_device'. - struct netvsc_device has pointers to 'struct hv_device' and 'struct net_device_context'. - struct rndis_device has a pointer to 'struct netvsc_device'. Different functions get different structures as parameters and use these pointers for traveling. The problem is (in addition to keeping in mind this complex graph) that some of these structures (struct netvsc_device and struct rndis_device) are being removed and re-created on mtu change (as we implement it as re-creation of hyper-v device) so our travel using these pointers is dangerous. Simplify this to a the following: - add struct netvsc_device pointer to struct net_device_context (which is a part of struct net_device and thus never disappears) - remove struct hv_device and struct net_device_context pointers from struct netvsc_device - replace pointer to 'struct netvsc_device' with pointer to 'struct net_device'. - always keep 'struct net_device' in hv_device driver_data. We'll end up with the following 'circular' structure: net_device: [net_device_context] -> netvsc_device -> rndis_device -> net_device -> hv_device -> net_device On MTU change we'll be removing the 'netvsc_device -> rndis_device' branch and re-creating it making the synchronization easier. There is one additional redundant pointer left, it is struct net_device link in struct netvsc_device, it is going to be removed in a separate commit. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16hv_netvsc: use start_remove flag to protect netvsc_link_change()Vitaly Kuznetsov1-4/+17
netvsc_link_change() can race with netvsc_change_mtu() or netvsc_set_channels() as these functions destroy struct netvsc_device and rndis filter. Use start_remove flag for syncronization. As netvsc_change_mtu()/netvsc_set_channels() are called with rtnl lock held we need to take it before checking start_remove value in netvsc_link_change(). Reported-by: Haiyang Zhang <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16hv_netvsc: move start_remove flag to net_device_contextVitaly Kuznetsov3-6/+13
struct netvsc_device is destroyed on mtu change so keeping the protection flag there is not a good idea. Move it to struct net_device_context which is preserved. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16phy: add support for a reset-gpio specificationUwe Kleine-König2-0/+11
The framework only asserts (for now) that the reset gpio is not active. Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Roger Quadros <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-16blk-mq: fix undefined behaviour in order_to_size()Bartlomiej Zolnierkiewicz1-1/+1
When this_order variable in blk_mq_init_rq_map() becomes zero the code incorrectly decrements the variable and passes the result to order_to_size() helper causing undefined behaviour: UBSAN: Undefined behaviour in block/blk-mq.c:1459:27 shift exponent 4294967295 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-00072-g33656a1 #22 Fix the code by checking this_order variable for not having the zero value first. Reported-by: Meelis Roos <[email protected]> Fixes: 320ae51feed5 ("blk-mq: new multi-queue block IO queueing mechanism") Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2016-05-16Merge branches 'acpi-pci', 'acpi-misc' and 'acpi-tools'Rafael J. Wysocki18-129/+122
* acpi-pci: ACPI,PCI,IRQ: remove SCI penalize function ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init() ACPI,PCI,IRQ: reduce static IRQ array size to 16 ACPI,PCI,IRQ: reduce resource requirements * acpi-misc: ACPI / sysfs: fix error code in get_status() ACPI / device_sysfs: Clean up checkpatch errors ACPI / device_sysfs: Change _SUN and _STA show functions error return to EIO ACPI / device_sysfs: Add sysfs support for _HRV hardware revision arm64: defconfig: Enable ACPI ACPI / ARM64: Remove EXPERT dependency for ACPI on ARM64 ACPI / ARM64: Don't enable ACPI by default on ARM64 acer-wmi: Use acpi_dev_found() eeepc-wmi: Use acpi_dev_found() ACPI / utils: Rename acpi_dev_present() * acpi-tools: tools/power/acpi: close file only if it is open
2016-05-16Merge branches 'acpi-numa', 'acpi-tables' and 'acpi-osi'Rafael J. Wysocki12-742/+914
* acpi-numa: ACPI / SRAT: fix SRAT parsing order with both LAPIC and X2APIC present * acpi-tables: ACPI / tables: Fix DSDT override mechanism ACPI / tables: Convert initrd table override to table upgrade mechanism ACPI / x86: Cleanup initrd related code ACPI / tables: Move table override mechanisms to tables.c * acpi-osi: ACPI / osi: Collect _OSI handling into one single file ACPI / osi: Cleanup coding style issues before creating a separate OSI source file ACPI / osi: Cleanup OSI handling code to use bool ACPI / osi: Fix default _OSI(Darwin) support ACPI / osi: Add acpi_osi=!! to allow reverting acpi_osi=! ACPI / osi: Cleanup _OSI("Linux") related code before introducing new support ACPI / osi: Fix an issue that acpi_osi=!* cannot disable ACPICA internal strings Conflicts: drivers/acpi/internal.h
2016-05-16Merge branches 'acpi-drivers', 'acpi-pm', 'acpi-ec' and 'acpi-video'Rafael J. Wysocki19-232/+675
* acpi-drivers: ACPI / GED: make evged.c explicitly non-modular ACPI / amba: Remove CLK_IS_ROOT ACPI / APD: Remove CLK_IS_ROOT ACPI: implement Generic Event Device * acpi-pm: ACPI / PM: Introduce efi poweroff for HW-full platforms without _S5 * acpi-ec: ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis ACPI 2.0 / ECDT: Enable correct ECDT initialization order ACPI 2.0 / ECDT: Remove early namespace reference from EC ACPI 2.0 / ECDT: Split EC_FLAGS_HANDLERS_INSTALLED * acpi-video: ACPI / video: mark acpi_video_get_levels() inline Thermal / ACPI / video: add INT3406 thermal driver ACPI/video: export acpi_video_get_levels video / backlight: remove the backlight_device_registered API video / backlight: add two APIs for drivers to use
2016-05-16Merge branch 'acpica'Rafael J. Wysocki129-1260/+1928
* acpica: (41 commits) ACPICA: Update version to 20160422 ACPICA: Move all ASCII utilities to a common file ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support for acpi_hw_write() ACPICA: ACPI 2.0, Hardware: Add access_width/bit_offset support in acpi_hw_read() ACPICA: Executer: Introduce a set of macros to handle bit width mask generation ACPICA: Hardware: Add optimized access bit width support ACPICA: Utilities: Add ACPI_IS_ALIGNED() macro ACPICA: Renamed some #defined flag constants for clarity ACPICA: ACPI 6.0, tools/iasl: Add support for new resource descriptors ACPICA: ACPI 6.0: Update _BIX support for new package element ACPICA: ACPI 6.1: Support for new PCCT subtable ACPICA: Refactor evaluate_object to reduce nesting ACPICA: Divergence: remove unwanted spaces for typedef ACPICA: Update version to 20160318 ACPICA: Namespace: Reorder \_SB._INI to make sure it is evaluated before _REG evaluations ACPICA: Events: Fix an issue that _REG association can happen before namespace is initialized ACPICA: Tables: Fix wrong MLC condition for dynamic table loading ACPICA: Interpreter: Fix wrong conditions for acpi_ev_install_region_handlers() invocation ACPICA: Hardware: Enhance acpi_hw_validate_register() with access_width/bit_offset awareness Utilities: Fix missing parentheses in ACPI_GET_BITS()/ACPI_SET_BITS() ...
2016-05-16Merge branches 'pm-avs', 'pm-clk', 'powercap' and 'pm-tools'Rafael J. Wysocki29-947/+1280
* pm-avs: PM / AVS: rockchip-io: make io-domains a child of the GRF * pm-clk: PM / clk: ensure we don't allocate a -ve size of count clks * powercap: powercap/intel_rapl: Add support for Kabylake * pm-tools: cpupower: fix potential memory leak cpupower: Add cpuidle parts into library cpupowerutils: bench: trivial fix of spelling mistake on "average" Fix cpupower manpages "NAME" section cpupower: bench: parse.c: fix several resource leaks Honour user's LDFLAGS
2016-05-16Merge branches 'pm-core' and 'pm-domains'Rafael J. Wysocki9-121/+91
* pm-core: PM / sleep: Drop unused `info' variable PM / Runtime: Move ignore_children flag under CONFIG_PM PM / Runtime: Fix error path in pm_runtime_force_resume() * pm-domains: PM / Domains: Drop unnecessary wakeup code from pm_genpd_prepare() PM / Domains: Remove redundant pm_runtime_get|put*() in pm_genpd_prepare() PM / Domains: Remove ->save|restore_state() callbacks PM / Domains: Rename pm_genpd_runtime_suspend|resume() PM / Domains: Rename stop_ok to suspend_ok for the genpd governor
2016-05-16Merge branch 'pm-devfreq'Rafael J. Wysocki20-1824/+1942
* pm-devfreq: PM / devfreq: style/typo fixes PM / devfreq: exynos: Add the detailed correlation for Exynos5422 bus PM / devfreq: event: Find the instance of devfreq-event device by using phandle PM / devfreq: event: Add new Exynos NoC probe driver MAINTAINERS: Add samsung bus frequency driver entry PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line PM / devfreq: exynos: Update documentation for bus devices using passive governor PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor PM / devfreq: Add new passive governor PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier PM / devfreq: Add devfreq_get_devfreq_by_phandle() PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver PM / devfreq: exynos: Add generic exynos bus frequency driver
2016-05-16Merge branch 'pm-cpuidle'Rafael J. Wysocki6-10/+153
* pm-cpuidle: cpuidle: Replace ktime_get() with local_clock() drivers: firmware: psci: use const and __initconst for psci_cpuidle_ops soc: qcom: spm: Use const and __initconst for qcom_cpuidle_ops ARM: cpuidle: constify return value of arm_cpuidle_get_ops() ARM: cpuidle: add const qualifier to cpuidle_ops member in structures intel_idle: add BXT support cpuidle: Indicate when a device has been unregistered
2016-05-16Merge branch 'pm-cpufreq'Rafael J. Wysocki77-1049/+2248
* pm-cpufreq: (63 commits) intel_pstate: Clean up get_target_pstate_use_performance() intel_pstate: Use sample.core_avg_perf in get_avg_pstate() intel_pstate: Clarify average performance computation intel_pstate: Avoid unnecessary synchronize_sched() during initialization cpufreq: schedutil: Make default depend on CONFIG_SMP cpufreq: powernv: del_timer_sync when global and local pstate are equal cpufreq: powernv: Move smp_call_function_any() out of irq safe block intel_pstate: Clean up intel_pstate_get() cpufreq: schedutil: Make it depend on CONFIG_SMP cpufreq: governor: Fix handling of special cases in dbs_update() cpufreq: intel_pstate: Ignore _PPC processing under HWP cpufreq: arm_big_little: use generic OPP functions for {init, free}_opp_table cpufreq: tango: Use generic platdev driver cpufreq: Fix GOV_LIMITS handling for the userspace governor cpufreq: mvebu: Move cpufreq code into drivers/cpufreq/ cpufreq: dt: Kill platform-data mvebu: Use dev_pm_opp_set_sharing_cpus() to mark OPP tables as shared cpufreq: dt: Identify cpu-sharing for platforms without operating-points-v2 cpufreq: governor: Change confusing struct field and variable names cpufreq: intel_pstate: Enable PPC enforcement for servers ...
2016-05-16Merge branch 'pm-opp'Rafael J. Wysocki6-544/+763
* pm-opp: PM / OPP: Move CONFIG_OF dependent code in a separate file PM / OPP: add non-OF versions of dev_pm_opp_{cpumask_, }remove_table PM / OPP: pass cpumask by reference PM / OPP: Add dev_pm_opp_get_sharing_cpus() PM / OPP: Mark cpumask as const in dev_pm_opp_set_sharing_cpus() PM / OPP: -ENOSYS is applicable only to syscalls PM / OPP: Mark shared-opp for non-dt case PM / OPP: Relocate dev_pm_opp_set_sharing_cpus() PM / OPP: dev_pm_opp_set_sharing_cpus() doesn't depend on CONFIG_OF PM / OPP: Add missing doc style comments PM / OPP: Propagate the error returned by _find_opp_table()
2016-05-16locking/rwsem: Fix comment on register clobberingBorislav Petkov1-2/+4
Document explicitly that %edx can get clobbered on the slow path, on 32-bit kernels. Something I learned the hard way. :-\ Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-05-16mmc: mmc: Fix partition switch timeout for some eMMCsAdrian Hunter1-0/+7
Some eMMCs set the partition switch timeout too low. Now typically eMMCs are considered a critical component (e.g. because they store the root file system) and consequently are expected to be reliable. Thus we can neglect the use case where eMMCs can't switch reliably and we might want a lower timeout to facilitate speedy recovery. Although we could employ a quirk for the cards that are affected (if we could identify them all), as described above, there is little benefit to having a low timeout, so instead simply set a minimum timeout. The minimum is set to 300ms somewhat arbitrarily - the examples that have been seen had a timeout of 10ms but were sometimes taking 60-70ms. Cc: [email protected] Signed-off-by: Adrian Hunter <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2016-05-16mmc: sh_mobile_sdhi: enable SDIO IRQs for RCar Gen3Wolfram Sang1-1/+1
Tested on a Salvator-X board with a Spectec SDW-823 WLAN card. Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2016-05-16mmc: sdio: fall back to SDIO 1.0 for broken 1.1 cardsWolfram Sang1-1/+6
I have two SDIO WLAN cards which specify being SDIO Rev. 1.1 cards but their FUNCE tuple reports the smaller size of a Rev 1.0 card. So, enforce 1.0 on these cards to avoid reading the not present registers. They are not really used anyhow. My cards initialize properly after this patch. Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2016-05-16mmc: sdhci-st: correct name of sd-uhs-sdr50 propertySimon Horman1-2/+2
Correct what appears to be a typo in the name of the sd-uhs-sdr50. Also fix mixed tab/space indentation. Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2016-05-16MAINTAINERS: update entry for TMIO MMC driverWolfram Sang1-5/+4
I have some more additions planned for this driver, so I'd like to get notified of other changes and coordinate them. Drop Ian as maintainer because he hasn't been involved in development for a while. Thanks for all the initial work, of course! Also, reflect the recent changes to the include file layout. Signed-off-by: Wolfram Sang <[email protected]> Cc: Ian Molton <[email protected]> Acked-by: Simon Horman <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2016-05-16mmc: block: improve logging of handling emmc timeoutsKen Sumrall1-2/+8
Add some logging to make it clear just how the emmc timeout was handled. Signed-off-by: Ken Sumrall <[email protected]> [AmitP: cherry-picked this Android patch from aosp common kernel android-4.4] Signed-off-by: Amit Pundir <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2016-05-16mmc: sdhci: removed unneeded function wrappersDong Aisheng1-45/+15
After commit d6463f170cf0 ("mmc: sdhci: Remove redundant runtime PM calls"), some of original sdhci_do_xx() function wrappers becomes meaningless, so remove them. Signed-off-by: Dong Aisheng <[email protected]> Acked-by: Adrian Hunter <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2016-05-15Linux 4.6Linus Torvalds1-1/+1
2016-05-15locking/rwsem: Fix down_write_killable()Peter Zijlstra1-6/+15
The new signal_pending exit path in __rwsem_down_write_failed_common() was fingered as breaking his kernel by Tetsuo Handa. Upon inspection it was found that there are two things wrong with it; - it forgets to remove WAITING_BIAS if it leaves the list empty, or - it forgets to wake further waiters that were blocked on the now removed waiter. Especially the first issue causes new lock attempts to block and stall indefinitely, as the code assumes that pending waiters mean there is an owner that will wake when it releases the lock. Reported-by: Tetsuo Handa <[email protected]> Tested-by: Tetsuo Handa <[email protected]> Tested-by: Michal Hocko <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Chris Zankel <[email protected]> Cc: David S. Miller <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Max Filippov <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vince Weaver <[email protected]> Cc: Waiman Long <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-05-15Merge branch '40GbE' of ↵David S. Miller13-165/+330
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-05-14 This series contains updates to i40e and i40evf. Kevin adds support to disable link on all ports and changes bits set for telling firmware the PHY needs to be modified by the driver. Anjali adds a feature to enable/disable all multicast for a trusted VF. Added priv-flag knob to configure global true promiscuous support. Shannon adds the support code for calling the admin queue API call aq_set_switch_config(). Mitch modifies the VF, to log a message if an untrusted VF attempts to configure promiscuous mode, but lies to it and returns everything is ok instead of returning an error. Corrects the logic for reporting the receive packet hash. Fixed the adding of a broadcast filter for VFs, since that all VSIs are configured to receive broadcasts as default, so do not need to add a filter. Catherine refactors the ethtool get_settings to report the possible supported link modes from what we know about the current PHY type and that with the firmware supported PHY types. Jacob changes the driver to use WARN_ONCE in order to highlight the issue, but do not display a warning every time when receive hang message is received. Akeem corrects receive ptype payload layer for non_tunneled IPv6, when it should be layer 4 for UDP, instead of layer 3. Dan Carpenter fixes an uninitialized variable bug. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-05-15Merge branch 'bnxt_en-next'David S. Miller4-49/+242
Michael Chan says: ==================== bnxt_en: updates for net-next. Non-critical bug fixes, improvements, a new ethtool feature, and a new device ID. v2: Fixed a bug in bnxt_get_module_eeprom() found by Ben Hutchings. Ajit Khaparde (2): bnxt_en: Add Support for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPRO bnxt_en: Report PCIe link speed and width during driver load Michael Chan (6): bnxt_en: Reduce maximum ring pages if page size is 64K. bnxt_en: Improve the delay logic for firmware response. bnxt_en: Fix length value in dmesg log firmware error message. bnxt_en: Simplify and improve unsupported SFP+ module reporting. bnxt_en: Add BCM57314 device ID. bnxt_en: Use dma_rmb() instead of rmb(). Satish Baddipadige (1): bnxt_en: Fix invalid max channel parameter in ethtool -l. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-05-15bnxt_en: Use dma_rmb() instead of rmb().Michael Chan1-1/+1
Use the weaker but more appropriate dma_rmb() to order the reading of the completion ring. Suggested-by: Ajit Khaparde <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-15bnxt_en: Add BCM57314 device ID.Michael Chan1-0/+3
Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-15bnxt_en: Simplify and improve unsupported SFP+ module reporting.Michael Chan2-37/+30
The current code is more complicated than necessary and can only report unsupported SFP+ module if it is plugged in after the device is up. Rename bnxt_port_module_event() to bnxt_get_port_module_status(). We already have the current module_status in the link_info structure, so just check that and report any unsupported SFP+ module status. Delete the unnecessary last_port_module_event. Call this function at the end of bnxt_open to report unsupported module already plugged in. Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.