aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-12-29dmaengine: qcom: gpi: Fixes a format mismatchXiaoming Ni1-4/+4
drivers/dma/qcom/gpi.c:1419:3: warning: format '%lu' expects argument of type 'long unsigned int', but argument 8 has type 'size_t {aka unsigned int}' [-Wformat=] drivers/dma/qcom/gpi.c:1427:31: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'size_t {aka unsigned int}' [-Wformat=] drivers/dma/qcom/gpi.c:1447:3: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'dma_addr_t {aka unsigned int}' [-Wformat=] drivers/dma/qcom/gpi.c:1447:3: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 5 has type 'phys_addr_t {aka unsigned int}' [-Wformat=] Signed-off-by: Xiaoming Ni <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-12-29dmaengine: idxd: off by one in cleanup codeDan Carpenter1-2/+2
The clean up is off by one so this will start at "i" and it should start with "i - 1" and then it doesn't unregister the zeroeth elements in the array. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/X9nFeojulsNqUSnG@mwanda Signed-off-by: Vinod Koul <[email protected]>
2020-12-29dmaengine: ti: k3-udma: Fix pktdma rchan TPL level setupPeter Ujfalusi1-3/+3
Instead of initializing the rchan_tpl the initial commit re-initialized the tchan_tpl. Fixes: d2abc982333c0 ("dmaengine: ti: k3-udma: Initial support for K3 PKTDMA") Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller11-27/+81
Daniel Borkmann says: ==================== pull-request: bpf 2020-12-28 The following pull-request contains BPF updates for your *net* tree. There is a small merge conflict between bpf tree commit 69ca310f3416 ("bpf: Save correct stopping point in file seq iteration") and net tree commit 66ed594409a1 ("bpf/task_iter: In task_file_seq_get_next use task_lookup_next_fd_rcu"). The get_files_struct() does not exist anymore in net, so take the hunk in HEAD and add the `info->tid = curr_tid` to the error path: [...] curr_task = task_seq_get_next(ns, &curr_tid, true); if (!curr_task) { info->task = NULL; info->tid = curr_tid; return NULL; } /* set info->task and info->tid */ [...] We've added 10 non-merge commits during the last 9 day(s) which contain a total of 11 files changed, 75 insertions(+), 20 deletions(-). The main changes are: 1) Various AF_XDP fixes such as fill/completion ring leak on failed bind and fixing a race in skb mode's backpressure mechanism, from Magnus Karlsson. 2) Fix latency spikes on lockdep enabled kernels by adding a rescheduling point to BPF hashtab initialization, from Eric Dumazet. 3) Fix a splat in task iterator by saving the correct stopping point in the seq file iteration, from Jonathan Lemon. 4) Fix BPF maps selftest by adding retries in case hashtab returns EBUSY errors on update/deletes, from Andrii Nakryiko. 5) Fix BPF selftest error reporting to something more user friendly if the vmlinux BTF cannot be found, from Kamal Mostafa. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-12-28net: hdlc_ppp: Fix issues when mod_timer is called while timer is runningXie He1-0/+7
ppp_cp_event is called directly or indirectly by ppp_rx with "ppp->lock" held. It may call mod_timer to add a new timer. However, at the same time ppp_timer may be already running and waiting for "ppp->lock". In this case, there's no need for ppp_timer to continue running and it can just exit. If we let ppp_timer continue running, it may call add_timer. This causes kernel panic because add_timer can't be called with a timer pending. This patch fixes this problem. Fixes: e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.") Cc: Krzysztof Halasa <[email protected]> Signed-off-by: Xie He <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-28atlantic: remove architecture dependsLéo Le Bouter1-1/+0
This was tested on a RaptorCS Talos II with IBM POWER9 DD2.2 CPUs and an ASUS XG-C100F PCI-e card without any issue. Speeds of ~8Gbps could be attained with not-very-scientific (wget HTTP) both-ways measurements on a local network. No warning or error reported in kernel logs. The drivers seems to be portable enough for it not to be gated like such. Signed-off-by: Léo Le Bouter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-28erspan: fix version 1 check in gre_parse_header()Cong Wang1-1/+1
Both version 0 and version 1 use ETH_P_ERSPAN, but version 0 does not have an erspan header. So the check in gre_parse_header() is wrong, we have to distinguish version 1 from version 0. We can just check the gre header length like is_erspan_type1(). Fixes: cb73ee40b1b3 ("net: ip_gre: use erspan key field for tunnel lookup") Reported-by: [email protected] Cc: William Tu <[email protected]> Cc: Lorenzo Bianconi <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-28net: hns: fix return value check in __lb_other_process()Yunjian Wang1-0/+4
The function skb_copy() could return NULL, the return value need to be checked. Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: Yunjian Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-28net: sched: prevent invalid Scell_log shift countRandy Dunlap5-5/+7
Check Scell_log shift size in red_check_params() and modify all callers of red_check_params() to pass Scell_log. This prevents a shift out-of-bounds as detected by UBSAN: UBSAN: shift-out-of-bounds in ./include/net/red.h:252:22 shift exponent 72 is too large for 32-bit type 'int' Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values") Signed-off-by: Randy Dunlap <[email protected]> Reported-by: [email protected] Cc: Nogah Frankel <[email protected]> Cc: Jamal Hadi Salim <[email protected]> Cc: Cong Wang <[email protected]> Cc: Jiri Pirko <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-28net: neighbor: fix a crash caused by mod zeroweichenchen1-4/+2
pneigh_enqueue() tries to obtain a random delay by mod NEIGH_VAR(p, PROXY_DELAY). However, NEIGH_VAR(p, PROXY_DELAY) migth be zero at that point because someone could write zero to /proc/sys/net/ipv4/neigh/[device]/proxy_delay after the callers check it. This patch uses prandom_u32_max() to get a random delay instead which avoids potential division by zero. Signed-off-by: weichenchen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-28ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()Guillaume Nault1-1/+1
RT_TOS() only clears one of the ECN bits. Therefore, when fib_compute_spec_dst() resorts to a fib lookup, it can return different results depending on the value of the second ECN bit. For example, ECT(0) and ECT(1) packets could be treated differently. $ ip netns add ns0 $ ip netns add ns1 $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev lo up $ ip -netns ns1 link set dev lo up $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10/24 dev veth01 $ ip -netns ns1 address add 192.0.2.11/24 dev veth10 $ ip -netns ns1 address add 192.0.2.21/32 dev lo $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 src 192.0.2.21 $ ip netns exec ns1 sysctl -wq net.ipv4.icmp_echo_ignore_broadcasts=0 With TOS 4 and ECT(1), ns1 replies using source address 192.0.2.21 (ping uses -Q to set all TOS and ECN bits): $ ip netns exec ns0 ping -c 1 -b -Q 5 192.0.2.255 [...] 64 bytes from 192.0.2.21: icmp_seq=1 ttl=64 time=0.544 ms But with TOS 4 and ECT(0), ns1 replies using source address 192.0.2.11 because the "tos 4" route isn't matched: $ ip netns exec ns0 ping -c 1 -b -Q 6 192.0.2.255 [...] 64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.597 ms After this patch the ECN bits don't affect the result anymore: $ ip netns exec ns0 ping -c 1 -b -Q 6 192.0.2.255 [...] 64 bytes from 192.0.2.21: icmp_seq=1 ttl=64 time=0.591 ms Fixes: 35ebf65e851c ("ipv4: Create and use fib_compute_spec_dst() helper.") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-28net: mvpp2: fix pkt coalescing int-threshold configurationStefan Chulski1-5/+6
The packet coalescing interrupt threshold has separated registers for different aggregated/cpu (sw-thread). The required value should be loaded for every thread but not only for 1 current cpu. Fixes: 213f428f5056 ("net: mvpp2: add support for TX interrupts and RX queue distribution modes") Signed-off-by: Stefan Chulski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28Merge branch 'net-ipa-fix-some-new-build-warnings'Jakub Kicinski1-25/+13
Alex Elder says: ==================== net: ipa: fix some new build warnings I got a super friendly message from the Intel kernel test robot that pointed out that two patches I posted last week caused new build warnings. I already had these problems fixed in my own tree but the fix was not included in what I sent out last week. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28net: ipa: don't return a value from evt_ring_command()Alex Elder1-11/+6
Callers of evt_ring_command() no longer care whether the command times out, and don't use what evt_ring_command() returns. Redefine that function to have void return type. Reported-by: kernel test robot <[email protected]> Fixes: 428b448ee764a ("net: ipa: use state to determine event ring command success") Signed-off-by: Alex Elder <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28net: ipa: don't return a value from gsi_channel_command()Alex Elder1-14/+7
Callers of gsi_channel_command() no longer care whether the command times out, and don't use what gsi_channel_command() returns. Redefine that function to have void return type. Reported-by: kernel test robot <[email protected]> Fixes: 6ffddf3b3d182 ("net: ipa: use state to determine channel command success") Signed-off-by: Alex Elder <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28Merge branch 'bnxt_en-bug-fixes'Jakub Kicinski2-20/+25
Michael Chan says: ==================== bnxt_en: Bug fixes. The first patch fixes recovery of fatal AER errors. The second one fixes a potential array out of bounds issue. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28bnxt_en: Check TQM rings for maximum supported value.Michael Chan2-3/+11
TQM rings are hardware resources that require host context memory managed by the driver. The driver supports up to 9 TQM rings and the number of rings to use is requested by firmware during run-time. Cap this number to the maximum supported to prevent accessing beyond the array. Future firmware may request more than 9 TQM rings. Define macros to remove the magic number 9 from the C code. Fixes: ac3158cb0108 ("bnxt_en: Allocate TQM ring context memory according to fw specification.") Reviewed-by: Pavan Chebbi <[email protected]> Reviewed-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28bnxt_en: Fix AER recovery.Vasundhara Volam1-17/+14
A recent change skips sending firmware messages to the firmware when pci_channel_offline() is true during fatal AER error. To make this complete, we need to move the re-initialization sequence to bnxt_io_resume(), otherwise the firmware messages to re-initialize will all be skipped. In any case, it is more correct to re-initialize in bnxt_io_resume(). Also, fix the reverse x-mas tree format when defining variables in bnxt_io_slot_reset(). Fixes: b340dc680ed4 ("bnxt_en: Avoid sending firmware messages when AER error is detected.") Reviewed-by: Edwin Peer <[email protected]> Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28Merge branch '1GbE' of ↵Jakub Kicinski4-52/+71
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-12-23 Commit e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems") disabled S0ix flows for systems that have various incarnations of the i219-LM ethernet controller. This was done because of some regressions caused by an earlier commit 632fbd5eb5b0e ("e1000e: fix S0ix flows for cable connected case") with i219-LM controller. Per discussion with Intel architecture team this direction should be changed and allow S0ix flows to be used by default. This patch series includes directional changes for their conclusions in https://lkml.org/lkml/2020/12/13/15. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Export S0ix flags to ethtool Revert "e1000e: disable s0ix entry and exit flows for ME systems" e1000e: bump up timeout to wait when ME un-configures ULP mode e1000e: Only run S0ix flows if shutdown succeeded ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28net: mptcp: cap forward allocation to 1MDavide Caratti1-1/+4
the following syzkaller reproducer: r0 = socket$inet_mptcp(0x2, 0x1, 0x106) bind$inet(r0, &(0x7f0000000080)={0x2, 0x4e24, @multicast2}, 0x10) connect$inet(r0, &(0x7f0000000480)={0x2, 0x4e24, @local}, 0x10) sendto$inet(r0, &(0x7f0000000100)="f6", 0xffffffe7, 0xc000, 0x0, 0x0) systematically triggers the following warning: WARNING: CPU: 2 PID: 8618 at net/core/stream.c:208 sk_stream_kill_queues+0x3fa/0x580 Modules linked in: CPU: 2 PID: 8618 Comm: syz-executor Not tainted 5.10.0+ #334 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/04 RIP: 0010:sk_stream_kill_queues+0x3fa/0x580 Code: df 48 c1 ea 03 0f b6 04 02 84 c0 74 04 3c 03 7e 40 8b ab 20 02 00 00 e9 64 ff ff ff e8 df f0 81 2 RSP: 0018:ffffc9000290fcb0 EFLAGS: 00010293 RAX: ffff888011cb8000 RBX: 0000000000000000 RCX: ffffffff86eecf0e RDX: 0000000000000000 RSI: ffffffff86eecf6a RDI: 0000000000000005 RBP: 0000000000000e28 R08: ffff888011cb8000 R09: fffffbfff1f48139 R10: ffffffff8fa409c7 R11: fffffbfff1f48138 R12: ffff8880215e6220 R13: ffffffff8fa409c0 R14: ffffc9000290fd30 R15: 1ffff92000521fa2 FS: 00007f41c78f4800(0000) GS:ffff88802d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95c803d088 CR3: 0000000025ed2000 CR4: 00000000000006f0 Call Trace: __mptcp_destroy_sock+0x4f5/0x8e0 mptcp_close+0x5e2/0x7f0 inet_release+0x12b/0x270 __sock_release+0xc8/0x270 sock_close+0x18/0x20 __fput+0x272/0x8e0 task_work_run+0xe0/0x1a0 exit_to_user_mode_prepare+0x1df/0x200 syscall_exit_to_user_mode+0x19/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 userspace programs provide arbitrarily high values of 'len' in sendmsg(): this is causing integer overflow of 'amount'. Cap forward allocation to 1 megabyte: higher values are not really useful. Suggested-by: Paolo Abeni <[email protected]> Fixes: e93da92896bc ("mptcp: implement wmem reservation") Signed-off-by: Davide Caratti <[email protected]> Link: https://lore.kernel.org/r/3334d00d8b2faecafdfab9aa593efcbf61442756.1608584474.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGSYunjian Wang1-1/+1
Currently the tun_napi_alloc_frags() function returns -ENOMEM when the number of iovs exceeds MAX_SKB_FRAGS + 1. However this is inappropriate, we should use -EMSGSIZE instead of -ENOMEM. The following distinctions are matters: 1. the caller need to drop the bad packet when -EMSGSIZE is returned, which means meeting a persistent failure. 2. the caller can try again when -ENOMEM is returned, which means meeting a transient failure. Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Yunjian Wang <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28net: ethernet: ti: cpts: fix ethtool output when no ptp_clock registeredGrygorii Strashko1-0/+2
The CPTS driver registers PTP PHC clock when first netif is going up and unregister it when all netif are down. Now ethtool will show: - PTP PHC clock index 0 after boot until first netif is up; - the last assigned PTP PHC clock index even if PTP PHC clock is not registered any more after all netifs are down. This patch ensures that -1 is returned by ethtool when PTP PHC clock is not registered any more. Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization") Signed-off-by: Grygorii Strashko <[email protected]> Acked-by: Richard Cochran <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28Merge tag 'for-5.11/dm-fix' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "Revert WQ_SYSFS change that broke reencryption (and all other functionality that requires reloading a dm-crypt DM table)" * tag 'for-5.11/dm-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: Revert "dm crypt: export sysfs of kcryptd workqueue"
2020-12-28Merge branch 'net-sysfs-fix-race-conditions-in-the-xps-code'Jakub Kicinski1-12/+53
Antoine Tenart says: ==================== net-sysfs: fix race conditions in the xps code This series fixes race conditions in the xps code, where out of bound accesses can occur when dev->num_tc is updated, triggering oops. The root cause is linked to locking issues. An explanation is given in each of the commit logs. We had a discussion on the v1 of this series about using the xps_map mutex instead of the rtnl lock. While that seemed a better compromise, v2 showed the added complexity wasn't best for fixes. So we decided to go back to v1 and use the rtnl lock. Because of this, the only differences between v1 and v3 are improvements in the commit messages. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28net-sysfs: take the rtnl lock when accessing xps_rxqs_map and num_tcAntoine Tenart1-5/+18
Accesses to dev->xps_rxqs_map (when using dev->num_tc) should be protected by the rtnl lock, like we do for netif_set_xps_queue. I didn't see an actual bug being triggered, but let's be safe here and take the rtnl lock while accessing the map in sysfs. Fixes: 8af2c06ff4b1 ("net-sysfs: Add interface for Rx queue(s) map per Tx queue") Signed-off-by: Antoine Tenart <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28net-sysfs: take the rtnl lock when storing xps_rxqsAntoine Tenart1-0/+7
Two race conditions can be triggered when storing xps rxqs, resulting in various oops and invalid memory accesses: 1. Calling netdev_set_num_tc while netif_set_xps_queue: - netif_set_xps_queue uses dev->tc_num as one of the parameters to compute the size of new_dev_maps when allocating it. dev->tc_num is also used to access the map, and the compiler may generate code to retrieve this field multiple times in the function. - netdev_set_num_tc sets dev->tc_num. If new_dev_maps is allocated using dev->tc_num and then dev->tc_num is set to a higher value through netdev_set_num_tc, later accesses to new_dev_maps in netif_set_xps_queue could lead to accessing memory outside of new_dev_maps; triggering an oops. 2. Calling netif_set_xps_queue while netdev_set_num_tc is running: 2.1. netdev_set_num_tc starts by resetting the xps queues, dev->tc_num isn't updated yet. 2.2. netif_set_xps_queue is called, setting up the map with the *old* dev->num_tc. 2.3. netdev_set_num_tc updates dev->tc_num. 2.4. Later accesses to the map lead to out of bound accesses and oops. A similar issue can be found with netdev_reset_tc. One way of triggering this is to set an iface up (for which the driver uses netdev_set_num_tc in the open path, such as bnx2x) and writing to xps_rxqs in a concurrent thread. With the right timing an oops is triggered. Both issues have the same fix: netif_set_xps_queue, netdev_set_num_tc and netdev_reset_tc should be mutually exclusive. We do that by taking the rtnl lock in xps_rxqs_store. Fixes: 8af2c06ff4b1 ("net-sysfs: Add interface for Rx queue(s) map per Tx queue") Signed-off-by: Antoine Tenart <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28net-sysfs: take the rtnl lock when accessing xps_cpus_map and num_tcAntoine Tenart1-7/+22
Accesses to dev->xps_cpus_map (when using dev->num_tc) should be protected by the rtnl lock, like we do for netif_set_xps_queue. I didn't see an actual bug being triggered, but let's be safe here and take the rtnl lock while accessing the map in sysfs. Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes") Signed-off-by: Antoine Tenart <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28net-sysfs: take the rtnl lock when storing xps_cpusAntoine Tenart1-0/+6
Two race conditions can be triggered when storing xps cpus, resulting in various oops and invalid memory accesses: 1. Calling netdev_set_num_tc while netif_set_xps_queue: - netif_set_xps_queue uses dev->tc_num as one of the parameters to compute the size of new_dev_maps when allocating it. dev->tc_num is also used to access the map, and the compiler may generate code to retrieve this field multiple times in the function. - netdev_set_num_tc sets dev->tc_num. If new_dev_maps is allocated using dev->tc_num and then dev->tc_num is set to a higher value through netdev_set_num_tc, later accesses to new_dev_maps in netif_set_xps_queue could lead to accessing memory outside of new_dev_maps; triggering an oops. 2. Calling netif_set_xps_queue while netdev_set_num_tc is running: 2.1. netdev_set_num_tc starts by resetting the xps queues, dev->tc_num isn't updated yet. 2.2. netif_set_xps_queue is called, setting up the map with the *old* dev->num_tc. 2.3. netdev_set_num_tc updates dev->tc_num. 2.4. Later accesses to the map lead to out of bound accesses and oops. A similar issue can be found with netdev_reset_tc. One way of triggering this is to set an iface up (for which the driver uses netdev_set_num_tc in the open path, such as bnx2x) and writing to xps_cpus in a concurrent thread. With the right timing an oops is triggered. Both issues have the same fix: netif_set_xps_queue, netdev_set_num_tc and netdev_reset_tc should be mutually exclusive. We do that by taking the rtnl lock in xps_cpus_store. Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes") Signed-off-by: Antoine Tenart <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28CDC-NCM: remove "connected" log messageRoland Dreier1-3/+0
The cdc_ncm driver passes network connection notifications up to usbnet_link_change(), which is the right place for any logging. Remove the netdev_info() duplicating this from the driver itself. This stops devices such as my "TRENDnet USB 10/100/1G/2.5G LAN" (ID 20f4:e02b) adapter from spamming the kernel log with cdc_ncm 2-2:2.0 enp0s2u2c2: network connection: connected messages every 60 msec or so. Signed-off-by: Roland Dreier <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-28Revert "dm crypt: export sysfs of kcryptd workqueue"Mike Snitzer1-4/+3
This reverts commit a2b8b2d975673b1a50ab0bcce5d146b9335edfad. WQ_SYSFS breaks the ability to reload a DM table due to sysfs kobject collision (due to active and inactive table). Given lack of demonstrated need for exposing this workqueue via sysfs: revert exposing it. Reported-by: Ignat Korchagin <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-12-28libceph: add __maybe_unused to DEFINE_MSGR2_FEATUREIlya Dryomov1-2/+2
Avoid -Wunused-const-variable warnings for "make W=1". Reported-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2020-12-28libceph: align session_key and con_secret to 16 bytesIlya Dryomov1-2/+10
crypto_shash_setkey() and crypto_aead_setkey() will do a (small) GFP_ATOMIC allocation to align the key if it isn't suitably aligned. It's not a big deal, but at the same time easy to avoid. The actual alignment requirement is dynamic, queryable with crypto_shash_alignmask() and crypto_aead_alignmask(), but shouldn't be stricter than 16 bytes for our algorithms. Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)") Signed-off-by: Ilya Dryomov <[email protected]>
2020-12-28libceph: fix auth_signature buffer allocation in secure modeIlya Dryomov1-1/+2
auth_signature frame is 68 bytes in plain mode and 96 bytes in secure mode but we are requesting 68 bytes in both modes. By luck, this doesn't actually result in any invalid memory accesses because the allocation is satisfied out of kmalloc-96 slab and so exactly 96 bytes are allocated, but KASAN rightfully complains. Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)") Reported-by: Luis Henriques <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2020-12-28ceph: reencode gid_list when reconnectingIlya Dryomov1-31/+22
On reconnect, cap and dentry releases are dropped and the fields that follow must be reencoded into the freed space. Currently these are timestamp and gid_list, but gid_list isn't reencoded. This results in failed to decode message of type 24 v4: End of buffer errors on the MDS. While at it, make a change to encode gid_list unconditionally, without regard to what head/which version was used as a result of checking whether CEPH_FEATURE_FS_BTIME is supported or not. URL: https://tracker.ceph.com/issues/48618 Fixes: 4f1ddb1ea874 ("ceph: implement updated ceph_mds_request_head structure") Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jeff Layton <[email protected]>
2020-12-28Merge branch 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds1-3/+10
Pull workqueue update from Tejun Heo: "The same as the cgroup tree - one commit which was scheduled for the 5.11 merge window. All the commit does is avoding spurious worker wakeups from workqueue allocation / config change path to help cpuisol use cases" * 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Kick a worker based on the actual activation of delayed works
2020-12-28Merge branch 'for-5.11' of ↵Linus Torvalds2-15/+17
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "These three patches were scheduled for the merge window but I forgot to send them out. Sorry about that. None of them are significant and they fit well in a fix pull request too - two are cosmetic and one fixes a memory leak in the mount option parsing path" * 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Fix memory leak when parsing multiple source parameters cgroup/cgroup.c: replace 'of->kn->priv' with of_cft() kernel: cgroup: Mundane spelling fixes throughout the file
2020-12-28usb: gadget: f_uac2: reset wMaxPacketSizeJerome Brunet1-14/+55
With commit 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth") wMaxPacketSize is computed dynamically but the value is never reset. Because of this, the actual maximum packet size can only decrease each time the audio gadget is instantiated. Reset the endpoint maximum packet size and mark wMaxPacketSize as dynamic to solve the problem. Fixes: 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth") Signed-off-by: Jerome Brunet <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regressionSerge Semin1-13/+5
First of all the commit e0082698b689 ("usb: dwc3: ulpi: conditionally resume ULPI PHY") introduced the Suspend USB2.0 HS/FS/LS PHY regression, as by design of the fix any attempt to read/write from/to the PHY control registers will completely disable the PHY suspension, which consequently will increase the USB bus power consumption. Secondly the fix won't work well for the very first attempt of the ULPI PHY control registers IO, because after disabling the USB2.0 PHY suspension functionality it will still take some time for the bus to resume from the sleep state if one has been reached before it. So the very first PHY register read/write operation will take more time than the busy-loop provides and the IO timeout error might be returned anyway. Here we suggest to fix the denoted problems in the following way. First of all let's not disable the Suspend USB2.0 HS/FS/LS PHY functionality so to make the controller and the USB2.0 bus more power efficient. Secondly instead of that we'll extend the PHY IO op wait procedure with 1 - 1.2 ms sleep if the PHY suspension is enabled (1ms should be enough as by LPM specification it is at most how long it takes for the USB2.0 bus to resume from L1 (Sleep) state). Finally in case if the USB2.0 PHY suspension functionality has been disabled on the DWC USB3 controller setup procedure we'll compensate the USB bus resume process latency by extending the busy-loop attempts counter. Fixes: e0082698b689 ("usb: dwc3: ulpi: conditionally resume ULPI PHY") Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Serge Semin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based oneSerge Semin1-3/+15
Originally the procedure of the ULPI transaction finish detection has been developed as a simple busy-loop with just decrementing counter and no delays. It's wrong since on different systems the loop will take a different time to complete. So if the system bus and CPU are fast enough to overtake the ULPI bus and the companion PHY reaction, then we'll get to take a false timeout error. Fix this by converting the busy-loop procedure to take the standard bus speed, address value and the registers access mode into account for the busy-loop delay calculation. Here is the way the fix works. It's known that the ULPI bus is clocked with 60MHz signal. In accordance with [1] the ULPI bus protocol is created so to spend 5 and 6 clock periods for immediate register write and read operations respectively, and 6 and 7 clock periods - for the extended register writes and reads. Based on that we can easily pre-calculate the time which will be needed for the controller to perform a requested IO operation. Note we'll still preserve the attempts counter in case if the DWC USB3 controller has got some internals delays. [1] UTMI+ Low Pin Interface (ULPI) Specification, Revision 1.1, October 20, 2004, pp. 30 - 36. Fixes: 88bc9d194ff6 ("usb: dwc3: add ULPI interface support") Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Serge Semin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28usb: dwc3: ulpi: Use VStsDone to detect PHY regs access completionSerge Semin2-1/+2
In accordance with [1] the DWC_usb3 core sets the GUSB2PHYACCn.VStsDone bit when the PHY vendor control access is done and clears it when the application initiates a new transaction. The doc doesn't say anything about the GUSB2PHYACCn.VStsBsy flag serving for the same purpose. Moreover we've discovered that the VStsBsy flag can be cleared before the VStsDone bit. So using the former as a signal of the PHY control registers completion might be dangerous. Let's have the VStsDone flag utilized instead then. [1] Synopsys DesignWare Cores SuperSpeed USB 3.0 xHCI Host Controller Databook, 2.70a, December 2013, p.388 Fixes: 88bc9d194ff6 ("usb: dwc3: add ULPI interface support") Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Serge Semin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28USB: yurex: fix control-URB timeout handlingJohan Hovold1-0/+3
Make sure to always cancel the control URB in write() so that it can be reused after a timeout or spurious CMD_ACK. Currently any further write requests after a timeout would fail after triggering a WARN() in usb_submit_urb() when attempting to submit the already active URB. Reported-by: [email protected] Fixes: 6bc235a2e24a ("USB: add driver for Meywa-Denki & Kayac YUREX") Cc: stable <[email protected]> # 2.6.37 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28usb: chipidea: ci_hdrc_imx: add missing put_device() call in ↵Yu Kuai1-1/+5
usbmisc_get_init_data() if of_find_device_by_node() succeed, usbmisc_get_init_data() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: ef12da914ed6 ("usb: chipidea: imx: properly check for usbmisc") Signed-off-by: Yu Kuai <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28usb: gadget: u_ether: Fix MTU size mismatch with RX packet sizeManish Narani1-4/+5
Fix the MTU size issue with RX packet size as the host sends the packet with extra bytes containing ethernet header. This causes failure when user sets the MTU size to the maximum i.e. 15412. In this case the ethernet packet received will be of length 15412 plus the ethernet header length. This patch fixes the issue where there is a check that RX packet length must not be more than max packet length. Fixes: bba787a860fa ("usb: gadget: ether: Allow jumbo frames") Signed-off-by: Manish Narani <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28USB: gadget: legacy: fix return error code in acm_ms_bind()Yang Yingliang1-1/+3
If usb_otg_descriptor_alloc() failed, it need return ENOMEM. Fixes: 578aa8a2b12c ("usb: gadget: acm_ms: allocate and init otg descriptor by otg capabilities") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28usb: gadget: Fix spinlock lockup on usb_function_deactivateSriharsha Allenki1-2/+8
There is a spinlock lockup as part of composite_disconnect when it tries to acquire cdev->lock as part of usb_gadget_deactivate. This is because the usb_gadget_deactivate is called from usb_function_deactivate with the same spinlock held. This would result in the below call stack and leads to stall. rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: 3-...0: (1 GPs behind) idle=162/1/0x4000000000000000 softirq=10819/10819 fqs=2356 (detected by 2, t=5252 jiffies, g=20129, q=3770) Task dump for CPU 3: task:uvc-gadget_wlhe state:R running task stack: 0 pid: 674 ppid: 636 flags:0x00000202 Call trace: __switch_to+0xc0/0x170 _raw_spin_lock_irqsave+0x84/0xb0 composite_disconnect+0x28/0x78 configfs_composite_disconnect+0x68/0x70 usb_gadget_disconnect+0x10c/0x128 usb_gadget_deactivate+0xd4/0x108 usb_function_deactivate+0x6c/0x80 uvc_function_disconnect+0x20/0x58 uvc_v4l2_release+0x30/0x88 v4l2_release+0xbc/0xf0 __fput+0x7c/0x230 ____fput+0x14/0x20 task_work_run+0x88/0x140 do_notify_resume+0x240/0x6f0 work_pending+0x8/0x200 Fix this by doing an unlock on cdev->lock before the usb_gadget_deactivate call from usb_function_deactivate. The same lockup can happen in the usb_gadget_activate path. Fix that path as well. Reported-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/linux-usb/20201102094936.GA29581@b29397-desktop/ Tested-by: Peter Chen <[email protected]> Signed-off-by: Sriharsha Allenki <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28usb: gadget: function: printer: Fix a memory leak for interface descriptorZqiang1-0/+1
When printer driver is loaded, the printer_func_bind function is called, in this function, the interface descriptor be allocated memory, if after that, the error occurred, the interface descriptor memory need to be free. Reviewed-by: Peter Chen <[email protected]> Cc: <[email protected]> Signed-off-by: Zqiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28usb: dwc3: meson-g12a: disable clk on error handling path in probeZheng Zengkai1-1/+1
dwc3_meson_g12a_probe() does not invoke clk_bulk_disable_unprepare() on one error handling path. This patch fixes that. Fixes: 347052e3bf1b ("usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Zheng Zengkai <[email protected]> Cc: stable <[email protected]> Reviewed-by: Martin Blumenstingl <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk setMichael Grzeschik1-12/+12
The commit 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long") was constraining the xhci code not to allow U1/U2 sleep states if the latency to wake up from the U-states reached the service interval of an periodic endpoint. This fix was not taking into account that in case the quirk XHCI_INTEL_HOST is set, the wakeup time will be calculated and configured differently. It checks for u1_params.mel/u2_params.mel as a limit. But the code could decide to write another MEL into the hardware. This leads to broken cases where not enough bandwidth is available for other devices: usb 1-2: can't set config #1, error -28 This patch is fixing that case by checking for timeout_ns after the wakeup time was calculated depending on the quirks. Fixes: 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long") Signed-off-by: Michael Grzeschik <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28usb: typec: intel_pmc_mux: Configure HPD first for HPD+IRQ requestMadhusudanarao Amara1-0/+11
Warm reboot scenarios some times type C Mux driver gets Mux configuration request as HPD=1,IRQ=1. In that scenario typeC Mux driver need to configure Mux as follows as per IOM requirement: (1). Confgiure Mux HPD = 1, IRQ = 0 (2). Configure Mux with HPD = 1, IRQ = 1 IOM expects TypeC Mux configuration as follows: (1). HPD=1, IRQ=0 (2). HPD=1, IRQ=1 if IOM gets mux config request (2) without configuring (1), it will ignore the request. The impact of this is there is no DP_alt mode display. Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect") Cc: [email protected] Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Madhusudanarao Amara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-28USB: cdc-wdm: Fix use after free in service_outstanding_interrupt().Tetsuo Handa1-3/+13
syzbot is reporting UAF at usb_submit_urb() [1], for service_outstanding_interrupt() is not checking WDM_DISCONNECTING before calling usb_submit_urb(). Close the race by doing same checks wdm_read() does upon retry. Also, while wdm_read() checks WDM_DISCONNECTING with desc->rlock held, service_interrupt_work() does not hold desc->rlock. Thus, it is possible that usb_submit_urb() is called from service_outstanding_interrupt() from service_interrupt_work() after WDM_DISCONNECTING was set and kill_urbs() from wdm_disconnect() completed. Thus, move kill_urbs() in wdm_disconnect() to after cancel_work_sync() (which makes sure that service_interrupt_work() is no longer running) completed. Although it seems to be safe to dereference desc->intf->dev in service_outstanding_interrupt() even if WDM_DISCONNECTING was already set because desc->rlock or cancel_work_sync() prevents wdm_disconnect() from reaching list_del() before service_outstanding_interrupt() completes, let's not emit error message if WDM_DISCONNECTING is set by wdm_disconnect() while usb_submit_urb() is in progress. [1] https://syzkaller.appspot.com/bug?extid=9e04e2df4a32fb661daf Reported-by: syzbot <[email protected]> Signed-off-by: Tetsuo Handa <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.