aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-02-05kconfig: Invalidate all symbols after changing to y or m.Tetsuo Handa1-3/+2
Since commit 89b9060987d9 ("kconfig: Add yes2modconfig and mod2yesconfig targets.") forgot to clear SYMBOL_VALID bit after changing to y or m, these targets did not save the changes. Call sym_clear_all_valid() so that all symbols are revalidated. Fixes: 89b9060987d9 ("kconfig: Add yes2modconfig and mod2yesconfig targets.") Signed-off-by: Tetsuo Handa <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-02-05kallsyms: fix type of kallsyms_token_table[]Masahiro Yamada1-2/+3
kallsyms_token_table[] only contains ASCII characters. It should be char instead of u8. Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Masami Hiramatsu <[email protected]>
2020-02-04drm/amd/dm/mst: Ignore payload update failuresLyude Paul1-9/+4
Disabling a display on MST can potentially happen after the entire MST topology has been removed, which means that we can't communicate with the topology at all in this scenario. Likewise, this also means that we can't properly update payloads on the topology and as such, it's a good idea to ignore payload update failures when disabling displays. Currently, amdgpu makes the mistake of halting the payload update process when any payload update failures occur, resulting in leaving DC's local copies of the payload tables out of date. This ends up causing problems with hotplugging MST topologies, and causes modesets on the second hotplug to fail like so: [drm] Failed to updateMST allocation table forpipe idx:1 ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1511 at drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2677 update_mst_stream_alloc_table+0x11e/0x130 [amdgpu] Modules linked in: cdc_ether usbnet fuse xt_conntrack nf_conntrack nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 nft_counter nft_compat nf_tables nfnetlink tun bridge stp llc sunrpc vfat fat wmi_bmof uvcvideo snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi videobuf2_vmalloc snd_hda_intel videobuf2_memops videobuf2_v4l2 snd_intel_dspcfg videobuf2_common crct10dif_pclmul snd_hda_codec videodev crc32_pclmul snd_hwdep snd_hda_core ghash_clmulni_intel snd_seq mc joydev pcspkr snd_seq_device snd_pcm sp5100_tco k10temp i2c_piix4 snd_timer thinkpad_acpi ledtrig_audio snd wmi soundcore video i2c_scmi acpi_cpufreq ip_tables amdgpu(O) rtsx_pci_sdmmc amd_iommu_v2 gpu_sched mmc_core i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm crc32c_intel serio_raw hid_multitouch r8152 mii nvme r8169 nvme_core rtsx_pci pinctrl_amd CPU: 5 PID: 1511 Comm: gnome-shell Tainted: G O 5.5.0-rc7Lyude-Test+ #4 Hardware name: LENOVO FA495SIT26/FA495SIT26, BIOS R12ET22W(0.22 ) 01/31/2019 RIP: 0010:update_mst_stream_alloc_table+0x11e/0x130 [amdgpu] Code: 28 00 00 00 75 2b 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d c3 0f b6 06 49 89 1c 24 41 88 44 24 08 0f b6 46 01 41 88 44 24 09 eb 93 <0f> 0b e9 2f ff ff ff e8 a6 82 a3 c2 66 0f 1f 44 00 00 0f 1f 44 00 RSP: 0018:ffffac428127f5b0 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff8d1e166eee80 RCX: 0000000000000000 RDX: ffffac428127f668 RSI: ffff8d1e166eee80 RDI: ffffac428127f610 RBP: ffffac428127f640 R08: ffffffffc03d94a8 R09: 0000000000000000 R10: ffff8d1e24b02000 R11: ffffac428127f5b0 R12: ffff8d1e1b83d000 R13: ffff8d1e1bea0b08 R14: 0000000000000002 R15: 0000000000000002 FS: 00007fab23ffcd80(0000) GS:ffff8d1e28b40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f151f1711e8 CR3: 00000005997c0000 CR4: 00000000003406e0 Call Trace: ? mutex_lock+0xe/0x30 dc_link_allocate_mst_payload+0x9a/0x210 [amdgpu] ? dm_read_reg_func+0x39/0xb0 [amdgpu] ? core_link_enable_stream+0x656/0x730 [amdgpu] core_link_enable_stream+0x656/0x730 [amdgpu] dce110_apply_ctx_to_hw+0x58e/0x5d0 [amdgpu] ? dcn10_verify_allow_pstate_change_high+0x1d/0x280 [amdgpu] ? dcn10_wait_for_mpcc_disconnect+0x3c/0x130 [amdgpu] dc_commit_state+0x292/0x770 [amdgpu] ? add_timer+0x101/0x1f0 ? ttm_bo_put+0x1a1/0x2f0 [ttm] amdgpu_dm_atomic_commit_tail+0xb59/0x1ff0 [amdgpu] ? amdgpu_move_blit.constprop.0+0xb8/0x1f0 [amdgpu] ? amdgpu_bo_move+0x16d/0x2b0 [amdgpu] ? ttm_bo_handle_move_mem+0x118/0x570 [ttm] ? ttm_bo_validate+0x134/0x150 [ttm] ? dm_plane_helper_prepare_fb+0x1b9/0x2a0 [amdgpu] ? _cond_resched+0x15/0x30 ? wait_for_completion_timeout+0x38/0x160 ? _cond_resched+0x15/0x30 ? wait_for_completion_interruptible+0x33/0x190 commit_tail+0x94/0x130 [drm_kms_helper] drm_atomic_helper_commit+0x113/0x140 [drm_kms_helper] drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper] drm_mode_setcrtc+0x194/0x6a0 [drm] ? _cond_resched+0x15/0x30 ? mutex_lock+0xe/0x30 ? drm_mode_getcrtc+0x180/0x180 [drm] drm_ioctl_kernel+0xaa/0xf0 [drm] drm_ioctl+0x208/0x390 [drm] ? drm_mode_getcrtc+0x180/0x180 [drm] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] do_vfs_ioctl+0x458/0x6d0 ksys_ioctl+0x5e/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fab2121f87b Code: 0f 1e fa 48 8b 05 0d 96 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 95 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd045f9068 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffd045f90a0 RCX: 00007fab2121f87b RDX: 00007ffd045f90a0 RSI: 00000000c06864a2 RDI: 000000000000000b RBP: 00007ffd045f90a0 R08: 0000000000000000 R09: 000055dbd2985d10 R10: 000055dbd2196280 R11: 0000000000000246 R12: 00000000c06864a2 R13: 000000000000000b R14: 0000000000000000 R15: 000055dbd2196280 ---[ end trace 6ea888c24d2059cd ]--- Note as well, I have only been able to reproduce this on setups with 2 MST displays. Changes since v1: * Don't return false when part 1 or part 2 of updating the payloads fails, we don't want to abort at any step of the process even if things fail Reviewed-by: Mikita Lipski <[email protected]> Signed-off-by: Lyude Paul <[email protected]> Acked-by: Harry Wentland <[email protected]> Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amdgpu: update default voltage for boot od table for navi1xAlex Deucher1-1/+8
It needed to be updated as well so it will show the proper values if you reset to the defaults. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04io_uring: cleanup fixed file data table referencesJens Axboe1-13/+19
syzbot reports a use-after-free in io_ring_file_ref_switch() when it tries to switch back to percpu mode. When we put the final reference to the table by calling percpu_ref_kill_and_confirm(), we don't want the zero reference to queue async work for flushing the potentially queued up items. We currently do a few flush_work(), but they merely paper around the issue, since the work item may not have been queued yet depending on the when the percpu-ref callback gets run. Coming into the file unregister, we know we have the ring quiesced. io_ring_file_ref_switch() can check for whether or not the ref is dying or not, and not queue anything async at that point. Once the ref has been confirmed killed, flush any potential items manually. Reported-by: [email protected] Fixes: 05f3fb3c5397 ("io_uring: avoid ring quiesce for fixed file set unregister and update") Signed-off-by: Jens Axboe <[email protected]>
2020-02-05cpuidle: Documentation: Clean up PM QoS descriptionRafael J. Wysocki1-4/+4
Clean up the language in one paragraph in the PM QoS description in Documentation/admin-guide/pm/cpuidle.rst. Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-02-04io_uring: spin for sq thread to idle on shutdownJens Axboe1-1/+12
As part of io_uring shutdown, we cancel work that is pending and won't necessarily complete on its own. That includes requests like poll commands and timeouts. If we're using SQPOLL for kernel side submission and we shutdown the ring immediately after queueing such work, we can race with the sqthread doing the submission. This means we may miss cancelling some work, which results in the io_uring shutdown hanging forever. Cc: [email protected] Signed-off-by: Jens Axboe <[email protected]>
2020-02-04dt-bindings: PCI: intel: Fix dt_binding_check compilation failureDilip Kota1-3/+1
Remove <dt-bindings/clock/intel,lgm-clk.h> dependency as it is not present in the mainline tree. Use numeric value instead of LGM_GCLK_PCIE10 macro. Signed-off-by: Dilip Kota <[email protected]> [robh: Also drop interrupt-parent from example] Signed-off-by: Rob Herring <[email protected]>
2020-02-04dt-bindings: phy: Fix errors in intel,lgm-emmc-phy exampleRob Herring1-1/+3
DT labels can't have '-' in them causing a compile failure in the example. Fixing that leads to more warnings: Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:23.13-33: Warning (reg_format): /example-0/chiptop@e0200000/emmc-phy@a8:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #address-cells value Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.example.dts:21.33-26.13: Warning (avoid_default_addr_size): /example-0/chiptop@e0200000/emmc-phy@a8: Relying on default #size-cells value Fixes: 5bc999108025 ("dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY") Cc: Ramuthevar Vadivel Murugan <[email protected]> Cc: Dafna Hirschfeld <[email protected]> Cc: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-02-04help_next should increase position indexVasily Averin1-0/+1
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Mike Marshall <[email protected]>
2020-02-04Merge branch 'nvme-5.6' of git://git.infradead.org/nvme into block-5.6Jens Axboe6-51/+72
Pull NVMe fixes from Keith. * 'nvme-5.6' of git://git.infradead.org/nvme: nvmet: update AEN list and array at one place nvmet: Fix controller use after free nvmet: Fix error print message at nvmet_install_queue function nvme-pci: remove nvmeq->tags nvmet: fix dsm failure when payload does not match sgl descriptor nvmet: Pass lockdep expression to RCU lists
2020-02-04NFSv4.0: nfs4_do_fsinfo() should not do implicit lease renewalsRobert Milkowski4-14/+11
Currently, each time nfs4_do_fsinfo() is called it will do an implicit NFS4 lease renewal, which is not compliant with the NFS4 specification. This can result in a lease being expired by an NFS server. Commit 83ca7f5ab31f ("NFS: Avoid PUTROOTFH when managing leases") introduced implicit client lease renewal in nfs4_do_fsinfo(), which can result in the NFSv4.0 lease to expire on a server side, and servers returning NFS4ERR_EXPIRED or NFS4ERR_STALE_CLIENTID. This can easily be reproduced by frequently unmounting a sub-mount, then stat'ing it to get it mounted again, which will delay or even completely prevent client from sending RENEW operations if no other NFS operations are issued. Eventually nfs server will expire client's lease and return an error on file access or next RENEW. This can also happen when a sub-mount is automatically unmounted due to inactivity (after nfs_mountpoint_expiry_timeout), then it is mounted again via stat(). This can result in a short window during which client's lease will expire on a server but not on a client. This specific case was observed on production systems. This patch removes the implicit lease renewal from nfs4_do_fsinfo(). Fixes: 83ca7f5ab31f ("NFS: Avoid PUTROOTFH when managing leases") Signed-off-by: Robert Milkowski <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
2020-02-04NFSv4: try lease recovery on NFS4ERR_EXPIREDRobert Milkowski1-0/+5
Currently, if an nfs server returns NFS4ERR_EXPIRED to open(), we return EIO to applications without even trying to recover. Fixes: 272289a3df72 ("NFSv4: nfs4_do_handle_exception() handle revoke/expiry of a single stateid") Signed-off-by: Robert Milkowski <[email protected]> Reviewed-by: Trond Myklebust <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
2020-02-05nvmet: update AEN list and array at one placeDaniel Wagner1-27/+36
All async events are enqueued via nvmet_add_async_event() which updates the ctrl->async_event_cmds[] array and additionally an struct nvmet_async_event is added to the ctrl->async_events list. Under normal operations the nvmet_async_event_work() updates again the ctrl->async_event_cmds and removes the corresponding struct nvmet_async_event from the list again. Though nvmet_sq_destroy() could be called which calls nvmet_async_events_free() which only updates the ctrl->async_event_cmds[] array. Add new functions nvmet_async_events_process() and nvmet_async_events_free() to process async events, update an array and the list. When we destroy submission queue after clearing the aen present on the ctrl->async list we also loop over ctrl->async_event_cmds[] for any requests posted by the host for which we don't have the AEN in the ctrl->async_events list by calling nvmet_async_event_process() and nvmet_async_events_free(). Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Daniel Wagner <[email protected]> [[email protected] * Loop over and clear out outstanding requests * Update changelog ] Signed-off-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-02-04ALSA: hda - Fix DP-MST support for NVIDIA codecsNikhil Mahale1-31/+63
If dyn_pcm_assign is set, different jack objects are being created for pcm and pins. If dyn_pcm_assign is set, generic_hdmi_build_jack() calls into add_hdmi_jack_kctl() to create and track separate jack object for pcm. Like sync_eld_via_acomp(), hdmi_present_sense_via_verbs() also need to report status change of the pcm jack. Rename pin_idx_to_jack() to pin_idx_to_pcm_jack(). Update hdmi_present_sense_via_verbs() to report plug state of pcm jack object. Unlike sync_eld_via_acomp(), for !acomp drivers the pcm jack's plug state must be consistent with plug state of pin's jack. Fixes: 5398e94fb753 ("ALSA: hda - Add DP-MST support for NVIDIA codecs") Reported-and-tested-by: Martin Regner <[email protected]> Signed-off-by: Nikhil Mahale <[email protected]> Reviewed-by: Kai Vehmanen <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-02-05nvmet: Fix controller use after freeIsrael Rukshin1-4/+9
After nvmet_install_queue() sets sq->ctrl calling to nvmet_sq_destroy() reduces the controller refcount. In case nvmet_install_queue() fails, calling to nvmet_ctrl_put() is done twice (at nvmet_sq_destroy and nvmet_execute_io_connect/nvmet_execute_admin_connect) instead of once for the queue which leads to use after free of the controller. Fix this by set NULL at sq->ctrl in case of a failure at nvmet_install_queue(). The bug leads to the following Call Trace: [65857.994862] refcount_t: underflow; use-after-free. [65858.108304] Workqueue: events nvmet_rdma_release_queue_work [nvmet_rdma] [65858.115557] RIP: 0010:refcount_warn_saturate+0xe5/0xf0 [65858.208141] Call Trace: [65858.211203] nvmet_sq_destroy+0xe1/0xf0 [nvmet] [65858.216383] nvmet_rdma_release_queue_work+0x37/0xf0 [nvmet_rdma] [65858.223117] process_one_work+0x167/0x370 [65858.227776] worker_thread+0x49/0x3e0 [65858.232089] kthread+0xf5/0x130 [65858.235895] ? max_active_store+0x80/0x80 [65858.240504] ? kthread_bind+0x10/0x10 [65858.244832] ret_from_fork+0x1f/0x30 [65858.249074] ---[ end trace f82d59250b54beb7 ]--- Fixes: bb1cc74790eb ("nvmet: implement valid sqhd values in completions") Fixes: 1672ddb8d691 ("nvmet: Add install_queue callout") Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-02-05nvmet: Fix error print message at nvmet_install_queue functionIsrael Rukshin1-1/+1
Place the arguments in the correct order. Fixes: 1672ddb8d691 ("nvmet: Add install_queue callout") Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-02-04NFS: Fix memory leaksWenwen Wang1-2/+2
In _nfs42_proc_copy(), 'res->commit_res.verf' is allocated through kzalloc() if 'args->sync' is true. In the following code, if 'res->synchronous' is false, handle_async_copy() will be invoked. If an error occurs during the invocation, the following code will not be executed and the error will be returned . However, the allocated 'res->commit_res.verf' is not deallocated, leading to a memory leak. This is also true if the invocation of process_copy_commit() returns an error. To fix the above leaks, redirect the execution to the 'out' label if an error is encountered. Signed-off-by: Wenwen Wang <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
2020-02-04nfs: optimise readdir cache page invalidationDai Ngo2-2/+10
When the directory is large and it's being modified by one client while another client is doing the 'ls -l' on the same directory then the cache page invalidation from nfs_force_use_readdirplus causes the reading client to keep restarting READDIRPLUS from cookie 0 which causes the 'ls -l' to take a very long time to complete, possibly never completing. Currently when nfs_force_use_readdirplus is called to switch from READDIR to READDIRPLUS, it invalidates all the cached pages of the directory. This cache page invalidation causes the next nfs_readdir to re-read the directory content from cookie 0. This patch is to optimise the cache invalidation in nfs_force_use_readdirplus by only truncating the cached pages from last page index accessed to the end the file. It also marks the inode to delay invalidating all the cached page of the directory until the next initial nfs_readdir of the next 'ls' instance. Signed-off-by: Dai Ngo <[email protected]> Reviewed-by: Trond Myklebust <[email protected]> [Anna - Fix conflicts with Trond's readdir patches] [Anna - Remove redundant call to nfs_zap_mapping()] [Anna - Replace d_inode(file_dentry(desc->file)) with file_inode(desc->file)] Signed-off-by: Anna Schumaker <[email protected]>
2020-02-04drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_voltageAlex Deucher1-3/+5
Cull out 0 clocks to avoid a warning in DC. Bug: https://gitlab.freedesktop.org/drm/amd/issues/963 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_latencyAlex Deucher1-6/+9
Only send non-0 clocks to DC for validation. This mirrors what the windows driver does. Bug: https://gitlab.freedesktop.org/drm/amd/issues/963 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amdgpu/display: handle multiple numbers of fclks in dcn_calcs.c (v2)Alex Deucher1-11/+23
We might get different numbers of clocks from powerplay depending on what the OEM has populated. v2: add assert for at least one level Bug: https://gitlab.freedesktop.org/drm/amd/issues/963 Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amdgpu: fetch default VDDC curve voltages (v2)Alex Deucher1-1/+49
Ask the SMU for the default VDDC curve voltage values. This properly reports the VDDC values in the OD interface. v2: only update if the original values are 0 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.5.x
2020-02-04drm/amdgpu/smu_v11_0: Correct behavior of restoring default tables (v2)Matt Coffin4-20/+22
Previously, the syfs functionality for restoring the default powerplay table was sourcing it's information from the currently-staged powerplay table. This patch adds a step to cache the first overdrive table that we see on boot, so that it can be used later to "restore" the powerplay table v2: sqaush my original with Matt's fix Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020 Signed-off-by: Matt Coffin <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.5.x
2020-02-04drm/amdgpu/navi10: add OD_RANGE for navi overclockingAlex Deucher1-0/+59
So users can see the range of valid values. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.5.x
2020-02-04drm/amdgpu/navi: fix index for OD MCLKAlex Deucher1-1/+1
You can only adjust the max mclk, not the min. Bug: https://gitlab.freedesktop.org/drm/amd/issues/1020 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.5.x
2020-02-04drm/amd/display: Fix HW/SW state mismatchBhawanpreet Lakha1-0/+19
[Why] When we disable a connector we don't explicitly remove it from the module so the display is still cached(SW) in the hdcp_module. SST: no issues because we can only have 1 display per link MST: We have x displays per link, now if we disable 1 we don't remove it from the module so the module has x display cached(SW). If we try to enable HDCP, psp verification will fail because we are reporting x displays while the HW only has x-1 display enabled [How] Check the callback for when we disable stream and call remove display. Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amd/display: Fix a typo when computing dsc configurationMikita Lipski1-1/+1
[why] Remove a backslash symbol accidentally left in increase bpp function when computing mst dsc configuration. Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Zhan Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amd/powerplay: fix navi10 system intermittent reboot issue V2Evan Quan6-1/+86
This workaround is needed only for Navi10 12 Gbps SKUs. V2: added SMU firmware version guard Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Feifei Xu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-02-04drm/amdkfd: Fix a bug in SDMA RLC queue counting under HWS modeYong Zhao1-4/+6
The sdma_queue_count increment should be done before execute_queues_cpsch(), which calls pm_calc_rlib_size() where sdma_queue_count is used to calculate whether over_subscription is triggered. With the previous code, when a SDMA queue is created, compute_queue_count in pm_calc_rlib_size() is one more than the actual compute queue number, because the queue_count has been incremented while sdma_queue_count has not. This patch fixes that. Signed-off-by: Yong Zhao <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04drm/amd/display: Only enable cursor on pipes that need itNicholas Kazlauskas1-0/+30
[Why] In current code we're essentially drawing the cursor on every pipe that contains it. This only works when the planes have the same scaling for src to dest rect, otherwise we'll get "double cursor" where one cursor is incorrectly filtered and offset from the real position. [How] Without dedicated cursor planes on DCN we require at least one pipe that matches the scaling of the current timing. This is an optimization and workaround for the most common case where the top-most plane is not scaled but the bottom-most plane is scaled. Whenever a pipe has a parent pipe in the blending tree whose recout fully contains the current pipe we can disable the pipe. This only applies when the pipe is actually visible of course. Signed-off-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-02-04x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCIJason A. Donenfeld1-2/+2
Recently, the to_pci_sysdata() helper was added inside the CONFIG_PCI guard, but it is used inside a CONFIG_NUMA guard, which does not require CONFIG_PCI. This breaks builds on !CONFIG_PCI machines. Make to_pci_sysdata() available in all configurations. Fixes: aad6aa0cd674 ("x86/PCI: Add to_pci_sysdata() helper") Link: https://lore.kernel.org/r/[email protected] Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Acked-by: Randy Dunlap <[email protected]> # build-tested
2020-02-04brd: check and limit max_part parZhiqiang Liu1-2/+20
In brd_init func, rd_nr num of brd_device are firstly allocated and add in brd_devices, then brd_devices are traversed to add each brd_device by calling add_disk func. When allocating brd_device, the disk->first_minor is set to i * max_part, if rd_nr * max_part is larger than MINORMASK, two different brd_device may have the same devt, then only one of them can be successfully added. when rmmod brd.ko, it will cause oops when calling brd_exit. Follow those steps: # modprobe brd rd_nr=3 rd_size=102400 max_part=1048576 # rmmod brd then, the oops will appear. Oops log: [ 726.613722] Call trace: [ 726.614175] kernfs_find_ns+0x24/0x130 [ 726.614852] kernfs_find_and_get_ns+0x44/0x68 [ 726.615749] sysfs_remove_group+0x38/0xb0 [ 726.616520] blk_trace_remove_sysfs+0x1c/0x28 [ 726.617320] blk_unregister_queue+0x98/0x100 [ 726.618105] del_gendisk+0x144/0x2b8 [ 726.618759] brd_exit+0x68/0x560 [brd] [ 726.619501] __arm64_sys_delete_module+0x19c/0x2a0 [ 726.620384] el0_svc_common+0x78/0x130 [ 726.621057] el0_svc_handler+0x38/0x78 [ 726.621738] el0_svc+0x8/0xc [ 726.622259] Code: aa0203f6 aa0103f7 aa1e03e0 d503201f (7940e260) Here, we add brd_check_and_reset_par func to check and limit max_part par. -- V5->V6: - remove useless code V4->V5:(suggested by Ming Lei) - make sure max_part is not larger than DISK_MAX_PARTS V3->V4:(suggested by Ming Lei) - remove useless change - add one limit of max_part V2->V3: (suggested by Ming Lei) - clear .minors when running out of consecutive minor space in brd_alloc - remove limit of rd_nr V1->V2: - add more checks in brd_check_par_valid as suggested by Ming Lei. Signed-off-by: Zhiqiang Liu <[email protected]> Reviewed-by: Bob Liu <[email protected]> Reviewed-by: Ming Lei <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds47-246/+569
Pull networking fixes from David Miller: 1) Use after free in rxrpc_put_local(), from David Howells. 2) Fix 64-bit division error in mlxsw, from Nathan Chancellor. 3) Make sure we clear various bits of TCP state in response to tcp_disconnect(). From Eric Dumazet. 4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet. 5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen. 6) Fix TC queue mapping in bnxt_en driver, from Michael Chan. 7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data, snapshot panics, stack out of bounds, etc.) 8) cls_tcindex changes hash table size after allocating the table, fix from Cong Wang. 9) Fix regression in the enforcement of session ID uniqueness in l2tp. We only have to enforce uniqueness for IP based tunnels not UDP ones. From Ridge Kennedy. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) gtp: use __GFP_NOWARN to avoid memalloc warning l2tp: Allow duplicate session creation with UDP r8152: Add MAC passthrough support to new device net_sched: fix an OOB access in cls_tcindex qed: Remove set but not used variable 'p_link' tc-testing: add missing 'nsPlugin' to basic.json tc-testing: fix eBPF tests failure on linux fresh clones net: hsr: fix possible NULL deref in hsr_handle_frame() netdevsim: remove unused sdev code netdevsim: use __GFP_NOWARN to avoid memalloc warning netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init() netdevsim: fix panic in nsim_dev_take_snapshot_write() netdevsim: disable devlink reload when resources are being used netdevsim: fix using uninitialized resources bnxt_en: Fix TC queue mapping. bnxt_en: Fix logic that disables Bus Master during firmware reset. bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset. bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected. net: stmmac: Delete txtimer in suspend() ...
2020-02-04Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds7-32/+29
Pull ARM updates from Russell King: - decompressor updates - prevention of out-of-bounds access while stacktracing - fix a section mismatch warning with free_memmap() - make kexec depend on MMU to avoid some build errors - remove swapops stubs * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8954/1: NOMMU: remove stubs for swapops ARM: 8952/1: Disable kmemleak on XIP kernels ARM: 8951/1: Fix Kexec compilation issue. ARM: 8949/1: mm: mark free_memmap as __init ARM: 8948/1: Prevent OOB access in stacktrace ARM: 8945/1: decompressor: use CONFIG option instead of cc-option ARM: 8942/1: Revert "8857/1: efi: enable CP15 DMB instructions before cleaning the cache" ARM: 8941/1: decompressor: enable CP15 barrier instructions in v7 cache setup code
2020-02-04Merge tag 'powerpc-5.6-1' of ↵Linus Torvalds141-1121/+2310
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "A pretty small batch for us, and apologies for it being a bit late, I wanted to sneak Christophe's user_access_begin() series in. Summary: - Implement user_access_begin() and friends for our platforms that support controlling kernel access to userspace. - Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx. - Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual machines) to use the IOMMU. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and some other improvements. - A series to use the PCI hotplug framework to control opencapi card's so that they can be reset and re-read after flashing a new FPGA image. As well as other minor fixes and improvements as usual. Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain" * tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits) powerpc: configs: Cleanup old Kconfig options powerpc/configs/skiroot: Enable some more hardening options powerpc/configs/skiroot: Disable xmon default & enable reboot on panic powerpc/configs/skiroot: Enable security features powerpc/configs/skiroot: Update for symbol movement only powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV powerpc/configs/skiroot: Drop HID_LOGITECH powerpc/configs: Drop NET_VENDOR_HP which moved to staging powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE powerpc/configs: Drop CONFIG_QLGE which moved to staging powerpc: Do not consider weak unresolved symbol relocations as bad powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK powerpc: indent to improve Kconfig readability powerpc: Provide initial documentation for PAPR hcalls powerpc: Implement user_access_save() and user_access_restore() powerpc: Implement user_access_begin and friends powerpc/32s: Prepare prevent_user_access() for user_access_end() powerpc/32s: Drop NULL addr verification powerpc/kuap: Fix set direction in allow/prevent_user_access() powerpc/32s: Fix bad_kuap_fault() ...
2020-02-04Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds15-17/+20
Pull Microblaze update from Michal Simek: - enable CMA - add support for MB v11 - defconfig updates - minor fixes * tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add ID for Microblaze v11 microblaze: Prevent the overflow of the start microblaze: Wire CMA allocator asm-generic: Make dma-contiguous.h a mandatory include/asm header microblaze: Sync defconfig with latest Kconfig layout microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers microblaze: Align comments with register usage
2020-02-04Merge tag 'ovl-update-5.6' of ↵Linus Torvalds13-228/+521
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs update from Miklos Szeredi: - Try to preserve holes in sparse files when copying up, thus saving disk space and improving performance. - Fix a performance regression introduced in v4.19 by preserving asynchronicity of IO when fowarding to underlying layers. Add VFS helpers to submit async iocbs. - Fix a regression in lseek(2) introduced in v4.19 that breaks >2G seeks on 32bit kernels. - Fix a corner case where st_ino/st_dev was not preserved across copy up. - Miscellaneous fixes and cleanups. * tag 'ovl-update-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix lseek overflow on 32bit ovl: add splice file read write helper ovl: implement async IO routines vfs: add vfs_iocb_iter_[read|write] helper functions ovl: layer is const ovl: fix corner case of non-constant st_dev;st_ino ovl: fix corner case of conflicting lower layer uuid ovl: generalize the lower_fs[] array ovl: simplify ovl_same_sb() helper ovl: generalize the lower_layers[] array ovl: improving copy-up efficiency for big sparse file ovl: use ovl_inode_lock in ovl_llseek() ovl: use pr_fmt auto generate prefix ovl: fix wrong WARN_ON() in ovl_cache_update_ino()
2020-02-04gtp: use __GFP_NOWARN to avoid memalloc warningTaehee Yoo1-2/+2
gtp hashtable size is received by user-space. So, this hashtable size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the gtp module. So, this patch adds __GFP_NOWARN to avoid this message. Splat looks like: [ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740 [ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv] [ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321 [ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246 [ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000 [ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000 [ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000 [ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43 [ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240 [ 2171.292328][ T1860] FS: 00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 2171.293409][ T1860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0 [ 2171.295424][ T1860] Call Trace: [ 2171.295756][ T1860] ? mark_held_locks+0xa5/0xe0 [ 2171.296659][ T1860] ? __alloc_pages_slowpath+0x21b0/0x21b0 [ 2171.298283][ T1860] ? gtp_encap_enable_socket+0x13e/0x400 [gtp] [ 2171.298962][ T1860] ? alloc_pages_current+0xc1/0x1a0 [ 2171.299475][ T1860] kmalloc_order+0x22/0x80 [ 2171.299936][ T1860] kmalloc_order_trace+0x1d/0x140 [ 2171.300437][ T1860] __kmalloc+0x302/0x3a0 [ 2171.300896][ T1860] gtp_newlink+0x293/0xba0 [gtp] [ ... ] Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-04l2tp: Allow duplicate session creation with UDPRidge Kennedy1-1/+6
In the past it was possible to create multiple L2TPv3 sessions with the same session id as long as the sessions belonged to different tunnels. The resulting sessions had issues when used with IP encapsulated tunnels, but worked fine with UDP encapsulated ones. Some applications began to rely on this behaviour to avoid having to negotiate unique session ids. Some time ago a change was made to require session ids to be unique across all tunnels, breaking the applications making use of this "feature". This change relaxes the duplicate session id check to allow duplicates if both of the colliding sessions belong to UDP encapsulated tunnels. Fixes: dbdbc73b4478 ("l2tp: fix duplicate session creation") Signed-off-by: Ridge Kennedy <[email protected]> Acked-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-04ASoC: wcd934x: Add missing COMMON_CLK dependencySrinivas Kandagatla1-0/+1
Looks like some platforms are not yet using COMMON CLK. PowerPC allyesconfig failed with below error in next ld: sound/soc/codecs/wcd934x.o:(.toc+0x0): undefined reference to `of_clk_src_simple_get' ld: sound/soc/codecs/wcd934x.o: in function `.wcd934x_codec_probe': wcd934x.c:(.text.wcd934x_codec_probe+0x3d4): undefined reference to `.__clk_get_name' ld: wcd934x.c:(.text.wcd934x_codec_probe+0x438): undefined reference to `.clk_hw_register' ld: wcd934x.c:(.text.wcd934x_codec_probe+0x474): undefined reference to `.of_clk_add_provider' Add the missing COMMON_CLK dependency to fix this errors. Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-02-04r8152: Add MAC passthrough support to new deviceKai-Heng Feng1-3/+10
Device 0xa387 also supports MAC passthrough, therefore add it to the whitelst. BugLink: https://bugs.launchpad.net/bugs/1827961/comments/30 Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-04net_sched: fix an OOB access in cls_tcindexCong Wang1-20/+20
As Eric noticed, tcindex_alloc_perfect_hash() uses cp->hash to compute the size of memory allocation, but cp->hash is set again after the allocation, this caused an out-of-bound access. So we have to move all cp->hash initialization and computation before the memory allocation. Move cp->mask and cp->shift together as cp->hash may need them for computation too. Reported-and-tested-by: [email protected] Fixes: 331b72922c5f ("net: sched: RCU cls_tcindex") Cc: Eric Dumazet <[email protected]> Cc: John Fastabend <[email protected]> Cc: Jamal Hadi Salim <[email protected]> Cc: Jiri Pirko <[email protected]> Cc: Jakub Kicinski <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-04microblaze: Add ID for Microblaze v11Michal Simek1-0/+1
List Microblaze v11 from PVR. Signed-off-by: Michal Simek <[email protected]>
2020-02-04microblaze: Prevent the overflow of the startShubhrajyoti Datta1-1/+2
In case the start + cache size is more than the max int the start overflows. Prevent the same. Signed-off-by: Shubhrajyoti Datta <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2020-02-04microblaze: Wire CMA allocatorMichal Simek3-0/+7
Based on commit 04e3543e228f ("microblaze: use the generic dma coherent remap allocator") CMA can be easily enabled by calling dma_contiguous_reserve() at the end of mmu_init(). High limit is end of lowmem space which is completely unused at this point of time. Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2020-02-04asm-generic: Make dma-contiguous.h a mandatory include/asm headerMichal Simek8-7/+1
dma-continuguous.h is generic for all architectures except arm32 which has its own version. Similar change was done for msi.h by commit a1b39bae16a6 ("asm-generic: Make msi.h a mandatory include/asm header") Suggested-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#m92bb56b04161057635d4142e1b3b9b6b0a70122e Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Acked-by: Paul Walmsley <[email protected]> # for arch/riscv
2020-02-04microblaze: Sync defconfig with latest Kconfig layoutMichal Simek1-3/+3
Layout was changed by commit 6210b6402f58 ("kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging Instruments'") Signed-off-by: Michal Simek <[email protected]>
2020-02-04microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 driversManish Narani2-2/+2
As EXT4 filesystem driver is used for handling EXT2 file systems as well. There is no need to enable EXT2 driver. This patch disables EXT2 and enables EXT3/EXT4 drivers. Signed-off-by: Manish Narani <[email protected]> Signed-off-by: Michal Simek <[email protected]>
2020-02-04MAINTAINERS: Remove the Bard Liao from the MAINTAINERS of Realtek CODECsOder Chiou1-1/+0
Remove the maintainer "Bard Liao" since he had quitted from Realtek. Signed-off-by: Oder Chiou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.