aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-12-16optee: Suppress false positive kmemleak report in optee_handle_rpc()Xiaolei Wang1-0/+2
We observed the following kmemleak report: unreferenced object 0xffff000007904500 (size 128): comm "swapper/0", pid 1, jiffies 4294892671 (age 44.036s) hex dump (first 32 bytes): 00 47 90 07 00 00 ff ff 60 00 c0 ff 00 00 00 00 .G......`....... 60 00 80 13 00 80 ff ff a0 00 00 00 00 00 00 00 `............... backtrace: [<000000004c12b1c7>] kmem_cache_alloc+0x1ac/0x2f4 [<000000005d23eb4f>] tee_shm_alloc+0x78/0x230 [<00000000794dd22c>] optee_handle_rpc+0x60/0x6f0 [<00000000d9f7c52d>] optee_do_call_with_arg+0x17c/0x1dc [<00000000c35884da>] optee_open_session+0x128/0x1ec [<000000001748f2ff>] tee_client_open_session+0x28/0x40 [<00000000aecb5389>] optee_enumerate_devices+0x84/0x2a0 [<000000003df18bf1>] optee_probe+0x674/0x6cc [<000000003a4a534a>] platform_drv_probe+0x54/0xb0 [<000000000c51ce7d>] really_probe+0xe4/0x4d0 [<000000002f04c865>] driver_probe_device+0x58/0xc0 [<00000000b485397d>] device_driver_attach+0xc0/0xd0 [<00000000c835f0df>] __driver_attach+0x84/0x124 [<000000008e5a429c>] bus_for_each_dev+0x70/0xc0 [<000000001735e8a8>] driver_attach+0x24/0x30 [<000000006d94b04f>] bus_add_driver+0x104/0x1ec This is not a memory leak because we pass the share memory pointer to secure world and would get it from secure world before releasing it. Signed-off-by: Xiaolei Wang <[email protected]> Signed-off-by: Jens Wiklander <[email protected]>
2021-12-16tee: optee: Fix incorrect page free bugSumit Garg1-4/+2
Pointer to the allocated pages (struct page *page) has already progressed towards the end of allocation. It is incorrect to perform __free_pages(page, order) using this pointer as we would free any arbitrary pages. Fix this by stop modifying the page pointer. Fixes: ec185dd3ab25 ("optee: Fix memory leak when failing to register shm pages") Cc: [email protected] Reported-by: Patrik Lantz <[email protected]> Signed-off-by: Sumit Garg <[email protected]> Reviewed-by: Tyler Hicks <[email protected]> Signed-off-by: Jens Wiklander <[email protected]>
2021-12-16Merge tag 'tegra-for-5.16-soc-fixes' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes soc/tegra: Fixes for v5.16-rc6 This contains a single build fix without which ARM allmodconfig builds are broken if -Werror is enabled. * tag 'tegra-for-5.16-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: fuse: Fix bitwise vs. logical OR warning Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2021-12-16netfilter: ctnetlink: remove expired entries firstFlorian Westphal1-2/+3
When dumping conntrack table to userspace via ctnetlink, check if the ct has already expired before doing any of the 'skip' checks. This expires dead entries faster. /proc handler also removes outdated entries first. Reported-by: Vitaly Zuevsky <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-12-16net: Fix double 0x prefix print in SKB dumpGal Pressman1-1/+1
When printing netdev features %pNF already takes care of the 0x prefix, remove the explicit one. Fixes: 6413139dfc64 ("skbuff: increase verbosity when dumping skb data") Signed-off-by: Gal Pressman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-16virtio_net: fix rx_drops stat for small pktsWenliang Wang1-6/+3
We found the stat of rx drops for small pkts does not increment when build_skb fail, it's not coherent with other mode's rx drops stat. Signed-off-by: Wenliang Wang <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-16dsa: mv88e6xxx: fix debug print for SPEED_UNFORCEDAndrey Eremeev1-2/+2
Debug print uses invalid check to detect if speed is unforced: (speed != SPEED_UNFORCED) should be used instead of (!speed). Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Andrey Eremeev <[email protected]> Fixes: 96a2b40c7bd3 ("net: dsa: mv88e6xxx: add port's MAC speed setter") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-16sfc_ef100: potential dereference of null pointerJiasheng Jiang1-0/+3
The return value of kmalloc() needs to be checked. To avoid use in efx_nic_update_stats() in case of the failure of alloc. Fixes: b593b6f1b492 ("sfc_ef100: statistics gathering") Signed-off-by: Jiasheng Jiang <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-16net: stmmac: dwmac-rk: fix oob read in rk_gmac_setupJohn Keeping1-1/+3
KASAN reports an out-of-bounds read in rk_gmac_setup on the line: while (ops->regs[i]) { This happens for most platforms since the regs flexible array member is empty, so the memory after the ops structure is being read here. It seems that mostly this happens to contain zero anyway, so we get lucky and everything still works. To avoid adding redundant data to nearly all the ops structures, add a new flag to indicate whether the regs field is valid and avoid this loop when it is not. Fixes: 3bb3d6b1c195 ("net: stmmac: Add RK3566/RK3568 SoC support") Signed-off-by: John Keeping <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-16Merge branch '1GbE' of ↵David S. Miller6-15/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-12-15 This series contains updates to igb, igbvf, igc and ixgbe drivers. Karen moves checks for invalid VF MAC filters to occur earlier for igb. Letu Ren fixes a double free issue in igbvf probe. Sasha fixes incorrect min value being used when calculating for max for igc. Robert Schlabbach adds documentation on enabling NBASE-T support for ixgbe. Cyril Novikov adds missing initialization of MDIO bus speed for ixgbe. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-12-16arm64: dts: lx2160a: fix scl-gpios property nameZhang Ying-224551-2/+2
Fix the typo in the property name. Fixes: d548c217c6a3c ("arm64: dts: add QorIQ LX2160A SoC support") Signed-off-by: Zhang Ying <[email protected]> Signed-off-by: Li Yang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2021-12-16tee: handle lookup of shm with reference count 0Jens Wiklander2-110/+68
Since the tee subsystem does not keep a strong reference to its idle shared memory buffers, it races with other threads that try to destroy a shared memory through a close of its dma-buf fd or by unmapping the memory. In tee_shm_get_from_id() when a lookup in teedev->idr has been successful, it is possible that the tee_shm is in the dma-buf teardown path, but that path is blocked by the teedev mutex. Since we don't have an API to tell if the tee_shm is in the dma-buf teardown path or not we must find another way of detecting this condition. Fix this by doing the reference counting directly on the tee_shm using a new refcount_t refcount field. dma-buf is replaced by using anon_inode_getfd() instead, this separates the life-cycle of the underlying file from the tee_shm. tee_shm_put() is updated to hold the mutex when decreasing the refcount to 0 and then remove the tee_shm from teedev->idr before releasing the mutex. This means that the tee_shm can never be found unless it has a refcount larger than 0. Fixes: 967c9cca2cc5 ("tee: generic TEE subsystem") Cc: [email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Reviewed-by: Lars Persson <[email protected]> Reviewed-by: Sumit Garg <[email protected]> Reported-by: Patrik Lantz <[email protected]> Signed-off-by: Jens Wiklander <[email protected]>
2021-12-16xen/netback: don't queue unlimited number of packagesJuergen Gross1-7/+11
In case a guest isn't consuming incoming network traffic as fast as it is coming in, xen-netback is buffering network packages in unlimited numbers today. This can result in host OOM situations. Commit f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") meant to introduce a mechanism to limit the amount of buffered data by stopping the Tx queue when reaching the data limit, but this doesn't work for cases like UDP. When hitting the limit don't queue further SKBs, but drop them instead. In order to be able to tell Rx packages have been dropped increment the rx_dropped statistics counter in this case. It should be noted that the old solution to continue queueing SKBs had the additional problem of an overflow of the 32-bit rx_queue_len value would result in intermittent Tx queue enabling. This is part of XSA-392 Fixes: f48da8b14d04ca8 ("xen-netback: fix unlimited guest Rx internal queue and carrier flapping") Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]>
2021-12-16xen/netback: fix rx queue stall detectionJuergen Gross2-24/+42
Commit 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when not using GSO") introduced a security problem in netback, as an interface would only be regarded to be stalled if no slot is available in the rx queue ring page. In case the SKB at the head of the queued requests will need more than one rx slot and only one slot is free the stall detection logic will never trigger, as the test for that is only looking for at least one slot to be free. Fix that by testing for the needed number of slots instead of only one slot being available. In order to not have to take the rx queue lock that often, store the number of needed slots in the queue data. As all SKB dequeue operations happen in the rx queue kernel thread this is safe, as long as the number of needed slots is accessed via READ/WRITE_ONCE() only and updates are always done with the rx queue lock held. Add a small helper for obtaining the number of free slots. This is part of XSA-392 Fixes: 1d5d48523900a4b ("xen-netback: require fewer guest Rx slots when not using GSO") Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]>
2021-12-16xen/console: harden hvc_xen against event channel stormsJuergen Gross3-3/+34
The Xen console driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using a lateeoi event channel. For the normal domU initial console this requires the introduction of bind_evtchn_to_irq_lateeoi() as there is no xenbus device available at the time the event channel is bound to the irq. As the decision whether an interrupt was spurious or not requires to test for bytes having been read from the backend, move sending the event into the if statement, as sending an event without having found any bytes to be read is making no sense at all. This is part of XSA-391 Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]> --- V2: - slightly adapt spurious irq detection (Jan Beulich) V3: - fix spurious irq detection (Jan Beulich)
2021-12-16xen/netfront: harden netfront against event channel stormsJuergen Gross1-31/+94
The Xen netfront driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using lateeoi event channels. For being able to detect the case of no rx responses being added while the carrier is down a new lock is needed in order to update and test rsp_cons and the number of seen unconsumed responses atomically. This is part of XSA-391 Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]> --- V2: - don't eoi irq in case of interface set broken (Jan Beulich) - handle carrier off + no new responses added (Jan Beulich) V3: - add rx_ prefix to rsp_unconsumed (Jan Beulich) - correct xennet_set_rx_rsp_cons() spelling (Jan Beulich)
2021-12-16xen/blkfront: harden blkfront against event channel stormsJuergen Gross1-3/+12
The Xen blkfront driver is still vulnerable for an attack via excessive number of events sent by the backend. Fix that by using lateeoi event channels. This is part of XSA-391 Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]>
2021-12-16ARM: dts: imx6qdl-wandboard: Fix Ethernet supportMartin Haaß1-0/+1
Currently, the imx6q-wandboard Ethernet does not transmit any data. This issue has been exposed by commit f5d9aa79dfdf ("ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs"). Fix it by describing the qca,clk-out-frequency property as suggested by the commit above. Fixes: 77591e42458d ("ARM: dts: imx6qdl-wandboard: add ethernet PHY description") Signed-off-by: Martin Haaß <[email protected]> Tested-by: Fabio Estevam <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2021-12-16pinctrl: stm32: consider the GPIO offset to expose all the GPIO linesFabien Dessenne1-4/+4
Consider the GPIO controller offset (from "gpio-ranges") to compute the maximum GPIO line number. This fixes an issue where gpio-ranges uses a non-null offset. e.g.: gpio-ranges = <&pinctrl 6 86 10> In that case the last valid GPIO line is not 9 but 15 (6 + 10 - 1) Cc: [email protected] Fixes: 67e2996f72c7 ("pinctrl: stm32: fix the reported number of GPIO lines per bank") Reported-by: Christoph Fritz <[email protected]> Signed-off-by: Fabien Dessenne <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2021-12-15net: usb: lan78xx: add Allied Telesis AT29M2-AFGreg Jesionowski1-0/+6
This adds the vendor and product IDs for the AT29M2-AF which is a lan7801-based device. Signed-off-by: Greg Jesionowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-15net/packet: rx_owner_map depends on pg_vecWillem de Bruijn1-2/+3
Packet sockets may switch ring versions. Avoid misinterpreting state between versions, whose fields share a union. rx_owner_map is only allocated with a packet ring (pg_vec) and both are swapped together. If pg_vec is NULL, meaning no packet ring was allocated, then neither was rx_owner_map. And the field may be old state from a tpacket_v3. Fixes: 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race condition") Reported-by: Syzbot <[email protected]> Signed-off-by: Willem de Bruijn <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-15netdevsim: Zero-initialize memory for new map's value in function ↵Haimin Zhang1-0/+1
nsim_bpf_map_alloc Zero-initialize memory for new map's value in function nsim_bpf_map_alloc since it may cause a potential kernel information leak issue, as follows: 1. nsim_bpf_map_alloc calls nsim_map_alloc_elem to allocate elements for a new map. 2. nsim_map_alloc_elem uses kmalloc to allocate map's value, but doesn't zero it. 3. A user application can use IOCTL BPF_MAP_LOOKUP_ELEM to get specific element's information in the map. 4. The kernel function map_lookup_elem will call bpf_map_copy_value to get the information allocated at step-2, then use copy_to_user to copy to the user buffer. This can only leak information for an array map. Fixes: 395cacb5f1a0 ("netdevsim: bpf: support fake map offload") Suggested-by: Jakub Kicinski <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: Haimin Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-15dpaa2-eth: fix ethtool statisticsIoana Ciornei2-1/+3
Unfortunately, with the blamed commit I also added a side effect in the ethtool stats shown. Because I added two more fields in the per channel structure without verifying if its size is used in any way, part of the ethtool statistics were off by 2. Fix this by not looking up the size of the structure but instead on a fixed value kept in a macro. Fixes: fc398bec0387 ("net: dpaa2: add adaptive interrupt coalescing") Signed-off-by: Ioana Ciornei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-16Merge tag 'drm-intel-fixes-2021-12-15' of ↵Dave Airlie1-1/+1
ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes Fix a bound check in the DMC fw load. Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/YbnGvnsX/[email protected]
2021-12-16netfilter: fix regression in looped (broad|multi)cast's MAC handlingIgnacy Gawędzki2-2/+4
In commit 5648b5e1169f ("netfilter: nfnetlink_queue: fix OOB when mac header was cleared"), the test for non-empty MAC header introduced in commit 2c38de4c1f8da7 ("netfilter: fix looped (broad|multi)cast's MAC handling") has been replaced with a test for a set MAC header. This breaks the case when the MAC header has been reset (using skb_reset_mac_header), as is the case with looped-back multicast packets. As a result, the packets ending up in NFQUEUE get a bogus hwaddr interpreted from the first bytes of the IP header. This patch adds a test for a non-empty MAC header in addition to the test for a set MAC header. The same two tests are also implemented in nfnetlink_log.c, where the initial code of commit 2c38de4c1f8da7 ("netfilter: fix looped (broad|multi)cast's MAC handling") has not been touched, but where supposedly the same situation may happen. Fixes: 5648b5e1169f ("netfilter: nfnetlink_queue: fix OOB when mac header was cleared") Signed-off-by: Ignacy Gawędzki <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-12-15usb: typec: tcpm: fix tcpm unregister port but leave a pending timerXu Yang1-5/+13
In current design, when the tcpm port is unregisterd, the kthread_worker will be destroyed in the last step. Inside the kthread_destroy_worker(), the worker will flush all the works and wait for them to end. However, if one of the works calls hrtimer_start(), this hrtimer will be pending until timeout even though tcpm port is removed. Once the hrtimer timeout, many strange kernel dumps appear. Thus, we can first complete kthread_destroy_worker(), then cancel all the hrtimers. This will guarantee that no hrtimer is pending at the end. Fixes: 3ed8e1c2ac99 ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events") cc: <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Xu Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15netfilter: nf_tables: fix use-after-free in nft_set_catchall_destroy()Eric Dumazet1-2/+2
We need to use list_for_each_entry_safe() iterator because we can not access @catchall after kfree_rcu() call. syzbot reported: BUG: KASAN: use-after-free in nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4486 [inline] BUG: KASAN: use-after-free in nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline] BUG: KASAN: use-after-free in nft_set_destroy+0x3fd/0x4f0 net/netfilter/nf_tables_api.c:4493 Read of size 8 at addr ffff8880716e5b80 by task syz-executor.3/8871 CPU: 1 PID: 8871 Comm: syz-executor.3 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x2ed mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4486 [inline] nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline] nft_set_destroy+0x3fd/0x4f0 net/netfilter/nf_tables_api.c:4493 __nft_release_table+0x79f/0xcd0 net/netfilter/nf_tables_api.c:9626 nft_rcv_nl_event+0x4f8/0x670 net/netfilter/nf_tables_api.c:9688 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 blocking_notifier_call_chain kernel/notifier.c:318 [inline] blocking_notifier_call_chain+0x67/0x90 kernel/notifier.c:306 netlink_release+0xcb6/0x1dd0 net/netlink/af_netlink.c:788 __sock_release+0xcd/0x280 net/socket.c:649 sock_close+0x18/0x20 net/socket.c:1314 __fput+0x286/0x9f0 fs/file_table.c:280 task_work_run+0xdd/0x1a0 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x27e/0x290 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f75fbf28adb Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24 0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44 RSP: 002b:00007ffd8da7ec10 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f75fbf28adb RDX: 00007f75fc08e828 RSI: ffffffffffffffff RDI: 0000000000000003 RBP: 00007f75fc08a960 R08: 0000000000000000 R09: 00007f75fc08e830 R10: 00007ffd8da7ed10 R11: 0000000000000293 R12: 00000000002067c3 R13: 00007ffd8da7ed10 R14: 00007f75fc088f60 R15: 0000000000000032 </TASK> Allocated by task 8886: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] ____kasan_kmalloc mm/kasan/common.c:513 [inline] ____kasan_kmalloc mm/kasan/common.c:472 [inline] __kasan_kmalloc+0xa6/0xd0 mm/kasan/common.c:522 kasan_kmalloc include/linux/kasan.h:269 [inline] kmem_cache_alloc_trace+0x1ea/0x4a0 mm/slab.c:3575 kmalloc include/linux/slab.h:590 [inline] nft_setelem_catchall_insert net/netfilter/nf_tables_api.c:5544 [inline] nft_setelem_insert net/netfilter/nf_tables_api.c:5562 [inline] nft_add_set_elem+0x232e/0x2f40 net/netfilter/nf_tables_api.c:5936 nf_tables_newsetelem+0x6ff/0xbb0 net/netfilter/nf_tables_api.c:6032 nfnetlink_rcv_batch+0x1710/0x25f0 net/netfilter/nfnetlink.c:513 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:634 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:652 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xdf0 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 15335: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free mm/kasan/common.c:328 [inline] __kasan_slab_free+0xd1/0x110 mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:235 [inline] __cache_free mm/slab.c:3445 [inline] kmem_cache_free_bulk+0x67/0x1e0 mm/slab.c:3766 kfree_bulk include/linux/slab.h:446 [inline] kfree_rcu_work+0x51c/0xa10 kernel/rcu/tree.c:3273 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 worker_thread+0x658/0x11f0 kernel/workqueue.c:2445 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 Last potentially related work creation: kasan_save_stack+0x1e/0x50 mm/kasan/common.c:38 __kasan_record_aux_stack+0xb5/0xe0 mm/kasan/generic.c:348 kvfree_call_rcu+0x74/0x990 kernel/rcu/tree.c:3550 nft_set_catchall_destroy net/netfilter/nf_tables_api.c:4489 [inline] nft_set_destroy net/netfilter/nf_tables_api.c:4504 [inline] nft_set_destroy+0x34a/0x4f0 net/netfilter/nf_tables_api.c:4493 __nft_release_table+0x79f/0xcd0 net/netfilter/nf_tables_api.c:9626 nft_rcv_nl_event+0x4f8/0x670 net/netfilter/nf_tables_api.c:9688 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83 blocking_notifier_call_chain kernel/notifier.c:318 [inline] blocking_notifier_call_chain+0x67/0x90 kernel/notifier.c:306 netlink_release+0xcb6/0x1dd0 net/netlink/af_netlink.c:788 __sock_release+0xcd/0x280 net/socket.c:649 sock_close+0x18/0x20 net/socket.c:1314 __fput+0x286/0x9f0 fs/file_table.c:280 task_work_run+0xdd/0x1a0 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:175 [inline] exit_to_user_mode_prepare+0x27e/0x290 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:300 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff8880716e5b80 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes inside of 64-byte region [ffff8880716e5b80, ffff8880716e5bc0) The buggy address belongs to the page: page:ffffea0001c5b940 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff8880716e5c00 pfn:0x716e5 flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 ffffea0000911848 ffffea00007c4d48 ffff888010c40200 raw: ffff8880716e5c00 ffff8880716e5000 000000010000001e 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x242040(__GFP_IO|__GFP_NOWARN|__GFP_COMP|__GFP_THISNODE), pid 3638, ts 211086074437, free_ts 211031029429 prep_new_page mm/page_alloc.c:2418 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4149 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5369 __alloc_pages_node include/linux/gfp.h:570 [inline] kmem_getpages mm/slab.c:1377 [inline] cache_grow_begin+0x75/0x470 mm/slab.c:2593 cache_alloc_refill+0x27f/0x380 mm/slab.c:2965 ____cache_alloc mm/slab.c:3048 [inline] ____cache_alloc mm/slab.c:3031 [inline] __do_cache_alloc mm/slab.c:3275 [inline] slab_alloc mm/slab.c:3316 [inline] __do_kmalloc mm/slab.c:3700 [inline] __kmalloc+0x3b3/0x4d0 mm/slab.c:3711 kmalloc include/linux/slab.h:595 [inline] kzalloc include/linux/slab.h:724 [inline] tomoyo_get_name+0x234/0x480 security/tomoyo/memory.c:173 tomoyo_parse_name_union+0xbc/0x160 security/tomoyo/util.c:260 tomoyo_update_path_number_acl security/tomoyo/file.c:687 [inline] tomoyo_write_file+0x629/0x7f0 security/tomoyo/file.c:1034 tomoyo_write_domain2+0x116/0x1d0 security/tomoyo/common.c:1152 tomoyo_add_entry security/tomoyo/common.c:2042 [inline] tomoyo_supervisor+0xbc7/0xf00 security/tomoyo/common.c:2103 tomoyo_audit_path_number_log security/tomoyo/file.c:235 [inline] tomoyo_path_number_perm+0x419/0x590 security/tomoyo/file.c:734 security_file_ioctl+0x50/0xb0 security/security.c:1541 __do_sys_ioctl fs/ioctl.c:868 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0xb3/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1338 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1389 free_unref_page_prepare mm/page_alloc.c:3309 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3388 slab_destroy mm/slab.c:1627 [inline] slabs_destroy+0x89/0xc0 mm/slab.c:1647 cache_flusharray mm/slab.c:3418 [inline] ___cache_free+0x4cc/0x610 mm/slab.c:3480 qlink_free mm/kasan/quarantine.c:146 [inline] qlist_free_all+0x4e/0x110 mm/kasan/quarantine.c:165 kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272 __kasan_slab_alloc+0x97/0xb0 mm/kasan/common.c:444 kasan_slab_alloc include/linux/kasan.h:259 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slab.c:3261 [inline] kmem_cache_alloc_node+0x2ea/0x590 mm/slab.c:3599 __alloc_skb+0x215/0x340 net/core/skbuff.c:414 alloc_skb include/linux/skbuff.h:1126 [inline] nlmsg_new include/net/netlink.h:953 [inline] rtmsg_ifinfo_build_skb+0x72/0x1a0 net/core/rtnetlink.c:3808 rtmsg_ifinfo_event net/core/rtnetlink.c:3844 [inline] rtmsg_ifinfo_event net/core/rtnetlink.c:3835 [inline] rtmsg_ifinfo+0x83/0x120 net/core/rtnetlink.c:3853 netdev_state_change net/core/dev.c:1395 [inline] netdev_state_change+0x114/0x130 net/core/dev.c:1386 linkwatch_do_dev+0x10e/0x150 net/core/link_watch.c:167 __linkwatch_run_queue+0x233/0x6a0 net/core/link_watch.c:213 linkwatch_event+0x4a/0x60 net/core/link_watch.c:252 process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298 Memory state around the buggy address: ffff8880716e5a80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880716e5b00: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc >ffff8880716e5b80: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff8880716e5c00: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880716e5c80: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2021-12-15usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restorePawel Laszczak1-0/+12
Patch puts content of cdnsp_gadget_pullup function inside spin_lock_irqsave and spin_lock_restore section. This construction is required here to keep the data consistency, otherwise some data can be changed e.g. from interrupt context. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Reported-by: Ken (Jian) He <[email protected]> cc: <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> -- Changelog: v2: - added disable_irq/enable_irq as sugester by Peter Chen drivers/usb/cdns3/cdnsp-gadget.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) Reviewed-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)Jimmy Wang1-0/+3
This device doesn't work well with LPM, losing connectivity intermittently. Disable LPM to resolve the issue. Reviewed-by: <[email protected]> Signed-off-by: Jimmy Wang <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15usb: xhci: Extend support for runtime power management for AMD's Yellow carp.Nehal Bakulchandra Shah1-1/+5
AMD's Yellow Carp platform has few more XHCI controllers, enable the runtime power management support for the same. Signed-off-by: Nehal Bakulchandra Shah <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15serial: 8250_fintek: Fix garbled text for consoleJi-Ze Hong (Peter Hong)1-20/+0
Commit fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") introduced support to use high baudrate with Fintek SuperIO UARTs. It'll change clocksources when the UART probed. But when user add kernel parameter "console=ttyS0,115200 console=tty0" to make the UART as console output, the console will output garbled text after the following kernel message. [ 3.681188] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled The issue is occurs in following step: probe_setup_port() -> fintek_8250_goto_highspeed() It change clocksource from 115200 to 921600 with wrong time, it should change clocksource in set_termios() not in probed. The following 3 patches are implemented change clocksource in fintek_8250_set_termios(). Commit 58178914ae5b ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81216H") Commit 195638b6d44f ("serial: 8250_fintek: UART dynamic clocksource on Fintek F81866") Commit 423d9118c624 ("serial: 8250_fintek: Add F81966 Support") Due to the high baud rate had implemented above 3 patches and the patch Commit fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") is bugged, So this patch will remove it. Fixes: fab8a02b73eb ("serial: 8250_fintek: Enable high speed mode on Fintek F81866") Signed-off-by: Ji-Ze Hong (Peter Hong) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15tty: n_hdlc: make n_hdlc_tty_wakeup() asynchronousTetsuo Handa1-1/+22
syzbot is reporting that an unprivileged user who logged in from tty console can crash the system using a reproducer shown below [1], for n_hdlc_tty_wakeup() is synchronously calling n_hdlc_send_frames(). ---------- #include <sys/ioctl.h> #include <unistd.h> int main(int argc, char *argv[]) { const int disc = 0xd; ioctl(1, TIOCSETD, &disc); while (1) { ioctl(1, TCXONC, 0); write(1, "", 1); ioctl(1, TCXONC, 1); /* Kernel panic - not syncing: scheduling while atomic */ } } ---------- Linus suspected that "struct tty_ldisc"->ops->write_wakeup() must not sleep, and Jiri confirmed it from include/linux/tty_ldisc.h. Thus, defer n_hdlc_send_frames() from n_hdlc_tty_wakeup() to a WQ context like net/nfc/nci/uart.c does. Link: https://syzkaller.appspot.com/bug?extid=5f47a8cea6a12b77a876 [1] Reported-by: syzbot <[email protected]> Cc: stable <[email protected]> Analyzed-by: Fabio M. De Francesco <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Confirmed-by: Jiri Slaby <[email protected]> Reviewed-by: Fabio M. De Francesco <[email protected]> Signed-off-by: Tetsuo Handa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15ixgbe: set X550 MDIO speed before talking to PHYCyril Novikov1-0/+3
The MDIO bus speed must be initialized before talking to the PHY the first time in order to avoid talking to it using a speed that the PHY doesn't support. This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined with the 10Gb network results in a 24MHz MDIO speed, which is apparently too fast for the connected PHY. PHY register reads over MDIO bus return garbage, leading to initialization failure. Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using the following setup: * Use an Atom C3000 family system with at least one X552 LAN on the SoC * Disable PXE or other BIOS network initialization if possible (the interface must not be initialized before Linux boots) * Connect a live 10Gb Ethernet cable to an X550 port * Power cycle (not reset, doesn't always work) the system and boot Linux * Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17 Fixes: e84db7272798 ("ixgbe: Introduce function to control MDIO speed") Signed-off-by: Cyril Novikov <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-15dm integrity: fix data corruption due to improper use of bvec_kmap_localMike Snitzer1-1/+1
Commit 25058d1c725c ("dm integrity: use bvec_kmap_local in __journal_read_write") didn't account for __journal_read_write() later adding the biovec's bv_offset. As such using bvec_kmap_local() caused the start of the biovec to be skipped. Trivial test that illustrates data corruption: # integritysetup format /dev/pmem0 # integritysetup open /dev/pmem0 integrityroot # mkfs.xfs /dev/mapper/integrityroot ... bad magic number bad magic number Metadata corruption detected at xfs_sb block 0x0/0x1000 libxfs_writebufr: write verifer failed on xfs_sb bno 0x0/0x1000 releasing dirty buffer (bulk) to free list! Fix this by using kmap_local_page() instead of bvec_kmap_local() in __journal_read_write(). Fixes: 25058d1c725c ("dm integrity: use bvec_kmap_local in __journal_read_write") Reported-by: Tony Asleson <[email protected]> Reviewed-by: Heinz Mauelshagen <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2021-12-15ixgbe: Document how to enable NBASE-T supportRobert Schlabbach2-0/+20
Commit a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") introduced suppression of the advertisement of NBASE-T speeds by default, according to Todd Fujinaka to accommodate customers with network switches which could not cope with advertised NBASE-T speeds, as posted in the E1000-devel mailing list: https://sourceforge.net/p/e1000/mailman/message/37106269/ However, the suppression was not documented at all, nor was how to enable NBASE-T support. Properly document the NBASE-T suppression and how to enable NBASE-T support. Fixes: a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") Reported-by: Robert Schlabbach <[email protected]> Signed-off-by: Robert Schlabbach <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-15igc: Fix typo in i225 LTR functionsSasha Neftin1-1/+1
The LTR maximum value was incorrectly written using the scale from the LTR minimum value. This would cause incorrect values to be sent, in cases where the initial calculation lead to different min/max scales. Fixes: 707abf069548 ("igc: Add initial LTR support") Suggested-by: Dima Ruinskiy <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Nechama Kraus <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-15igbvf: fix double free in `igbvf_probe`Letu Ren1-0/+1
In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0 Fixes: d4e0fe01a38a0 (igbvf: add new driver to support 82576 virtual functions) Reported-by: Zheyu Ma <[email protected]> Signed-off-by: Letu Ren <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-15igb: Fix removal of unicast MAC filters of VFsKaren Sornek1-14/+14
Move checking condition of VF MAC filter before clearing or adding MAC filter to VF to prevent potential blackout caused by removal of necessary and working VF's MAC filter. Fixes: 1b8b062a99dc ("igb: add VF trust infrastructure") Signed-off-by: Karen Sornek <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-12-15Merge tag 'ceph-for-5.16-rc6' of git://github.com/ceph/ceph-clientLinus Torvalds3-14/+25
Pull ceph fixes from Ilya Dryomov: "An SGID directory handling fix (marked for stable), a metrics accounting fix and two fixups to appease static checkers" * tag 'ceph-for-5.16-rc6' of git://github.com/ceph/ceph-client: ceph: fix up non-directory creation in SGID directories ceph: initialize pathlen variable in reconnect_caps_cb ceph: initialize i_size variable in ceph_sync_read ceph: fix duplicate increment of opened_inodes metric
2021-12-15Merge tag 's390-5.16-5' of ↵Linus Torvalds6-11/+44
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Add missing handling of R_390_PLT32DBL relocation type in arch_kexec_apply_relocations_add(). Clang and the upcoming gcc 11.3 generate such relocation entries, which our relocation code silently ignores, and which finally will result in an endless loop within the purgatory code in case of kexec. - Add proper handling of errors and print error messages when applying relocations - Fix duplicate tracking of irq nesting level in entry code - Let recordmcount.pl also look for jgnop mnemonic. Starting with binutils 2.37 objdump emits a jgnop mnemonic instead of brcl, which breaks mcount location detection. This is only a problem if used with compilers older than gcc 9, since with gcc 9 and newer compilers recordmcount.pl is not used anymore. - Remove preempt_disable()/preempt_enable() pair in kprobe_ftrace_handler() which was done for all architectures except for s390. - Update defconfig * tag 's390-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: recordmcount.pl: look for jgnop instruction as well as bcrl on s390 s390/entry: fix duplicate tracking of irq nesting level s390: enable switchdev support in defconfig s390/kexec: handle R_390_PLT32DBL rela in arch_kexec_apply_relocations_add() s390/ftrace: remove preempt_disable()/preempt_enable() pair s390/kexec_file: fix error handling when applying relocations s390/kexec_file: print some more error messages
2021-12-15Merge tag 'hyperv-fixes-signed-20211214' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fix from Wei Liu: "Build fix from Randy Dunlap" * tag 'hyperv-fixes-signed-20211214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv: utils: add PTP_1588_CLOCK to Kconfig to fix build
2021-12-15audit: improve robustness of the audit queue handlingPaul Moore1-11/+10
If the audit daemon were ever to get stuck in a stopped state the kernel's kauditd_thread() could get blocked attempting to send audit records to the userspace audit daemon. With the kernel thread blocked it is possible that the audit queue could grow unbounded as certain audit record generating events must be exempt from the queue limits else the system enter a deadlock state. This patch resolves this problem by lowering the kernel thread's socket sending timeout from MAX_SCHEDULE_TIMEOUT to HZ/10 and tweaks the kauditd_send_queue() function to better manage the various audit queues when connection problems occur between the kernel and the audit daemon. With this patch, the backlog may temporarily grow beyond the defined limits when the audit daemon is stopped and the system is under heavy audit pressure, but kauditd_thread() will continue to make progress and drain the queues as it would for other connection problems. For example, with the audit daemon put into a stopped state and the system configured to audit every syscall it was still possible to shutdown the system without a kernel panic, deadlock, etc.; granted, the system was slow to shutdown but that is to be expected given the extreme pressure of recording every syscall. The timeout value of HZ/10 was chosen primarily through experimentation and this developer's "gut feeling". There is likely no one perfect value, but as this scenario is limited in scope (root privileges would be needed to send SIGSTOP to the audit daemon), it is likely not worth exposing this as a tunable at present. This can always be done at a later date if it proves necessary. Cc: [email protected] Fixes: 5b52330bbfe63 ("audit: fix auditd/kernel connection state tracking") Reported-by: Gaosheng Cui <[email protected]> Tested-by: Gaosheng Cui <[email protected]> Reviewed-by: Richard Guy Briggs <[email protected]> Signed-off-by: Paul Moore <[email protected]>
2021-12-15usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probeAmelie Delaunay1-0/+3
When activate_stm_id_vb_detection is enabled, ID and Vbus detection relies on sensing comparators. This detection needs time to stabilize. A delay was already applied in dwc2_resume() when reactivating the detection, but it wasn't done in dwc2_probe(). This patch adds delay after enabling STM ID/VBUS detection. Then, ID state is good when initializing gadget and host, and avoid to get a wrong Connector ID Status Change interrupt. Fixes: a415083a11cc ("usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS") Cc: stable <[email protected]> Acked-by: Minas Harutyunyan <[email protected]> Signed-off-by: Amelie Delaunay <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15USB: gadget: bRequestType is a bitfield, not a enumGreg Kroah-Hartman3-9/+9
Szymon rightly pointed out that the previous check for the endpoint direction in bRequestType was not looking at only the bit involved, but rather the whole value. Normally this is ok, but for some request types, bits other than bit 8 could be set and the check for the endpoint length could not stall correctly. Fix that up by only checking the single bit. Fixes: 153a2d7e3350 ("USB: gadget: detect too-big endpoint 0 requests") Cc: Felipe Balbi <[email protected]> Reported-by: Szymon Heidrich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15soc/tegra: fuse: Fix bitwise vs. logical OR warningNathan Chancellor2-2/+2
A new warning in clang points out two instances where boolean expressions are being used with a bitwise OR instead of logical OR: drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] reg = tegra_fuse_read_spare(i) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/soc/tegra/fuse/speedo-tegra20.c:72:9: note: cast one or both operands to int to silence this warning drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] reg = tegra_fuse_read_spare(i) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/soc/tegra/fuse/speedo-tegra20.c:87:9: note: cast one or both operands to int to silence this warning 2 warnings generated. The motivation for the warning is that logical operations short circuit while bitwise operations do not. In this instance, tegra_fuse_read_spare() is not semantically returning a boolean, it is returning a bit value. Use u32 for its return type so that it can be used with either bitwise or boolean operators without any warnings. Fixes: 25cd5a391478 ("ARM: tegra: Add speedo-based process identification") Link: https://github.com/ClangBuiltLinux/linux/issues/1488 Suggested-by: Michał Mirosław <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-15btrfs: fix missing blkdev_put() call in btrfs_scan_one_device()Shin'ichiro Kawasaki1-2/+4
The function btrfs_scan_one_device() calls blkdev_get_by_path() and blkdev_put() to get and release its target block device. However, when btrfs_sb_log_location_bdev() fails, blkdev_put() is not called and the block device is left without clean up. This triggered failure of fstests generic/085. Fix the failure path of btrfs_sb_log_location_bdev() to call blkdev_put(). Fixes: 12659251ca5df ("btrfs: implement log-structured superblock for ZONED mode") CC: [email protected] # 5.15+ Reviewed-by: Nikolay Borisov <[email protected]> Signed-off-by: Shin'ichiro Kawasaki <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-12-15btrfs: fix warning when freeing leaf after subvolume creation failureFilipe Manana1-3/+4
When creating a subvolume, at ioctl.c:create_subvol(), if we fail to insert the root item for the new subvolume into the root tree, we can trigger the following warning: [78961.741046] WARNING: CPU: 0 PID: 4079814 at fs/btrfs/extent-tree.c:3357 btrfs_free_tree_block+0x2af/0x310 [btrfs] [78961.743344] Modules linked in: [78961.749440] dm_snapshot dm_thin_pool (...) [78961.773648] CPU: 0 PID: 4079814 Comm: fsstress Not tainted 5.16.0-rc4-btrfs-next-108 #1 [78961.775198] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [78961.777266] RIP: 0010:btrfs_free_tree_block+0x2af/0x310 [btrfs] [78961.778398] Code: 17 00 48 85 (...) [78961.781067] RSP: 0018:ffffaa4001657b28 EFLAGS: 00010202 [78961.781877] RAX: 0000000000000213 RBX: ffff897f8a796910 RCX: 0000000000000000 [78961.782780] RDX: 0000000000000000 RSI: 0000000011004000 RDI: 00000000ffffffff [78961.783764] RBP: ffff8981f490e800 R08: 0000000000000001 R09: 0000000000000000 [78961.784740] R10: 0000000000000000 R11: 0000000000000001 R12: ffff897fc963fcc8 [78961.785665] R13: 0000000000000001 R14: ffff898063548000 R15: ffff898063548000 [78961.786620] FS: 00007f31283c6b80(0000) GS:ffff8982ace00000(0000) knlGS:0000000000000000 [78961.787717] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [78961.788598] CR2: 00007f31285c3000 CR3: 000000023fcc8003 CR4: 0000000000370ef0 [78961.789568] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [78961.790585] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [78961.791684] Call Trace: [78961.792082] <TASK> [78961.792359] create_subvol+0x5d1/0x9a0 [btrfs] [78961.793054] btrfs_mksubvol+0x447/0x4c0 [btrfs] [78961.794009] ? preempt_count_add+0x49/0xa0 [78961.794705] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs] [78961.795712] ? _copy_from_user+0x66/0xa0 [78961.796382] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [78961.797392] btrfs_ioctl+0xd1e/0x35c0 [btrfs] [78961.798172] ? __slab_free+0x10a/0x360 [78961.798820] ? rcu_read_lock_sched_held+0x12/0x60 [78961.799664] ? lock_release+0x223/0x4a0 [78961.800321] ? lock_acquired+0x19f/0x420 [78961.800992] ? rcu_read_lock_sched_held+0x12/0x60 [78961.801796] ? trace_hardirqs_on+0x1b/0xe0 [78961.802495] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [78961.803358] ? kmem_cache_free+0x321/0x3c0 [78961.804071] ? __x64_sys_ioctl+0x83/0xb0 [78961.804711] __x64_sys_ioctl+0x83/0xb0 [78961.805348] do_syscall_64+0x3b/0xc0 [78961.805969] entry_SYSCALL_64_after_hwframe+0x44/0xae [78961.806830] RIP: 0033:0x7f31284bc957 [78961.807517] Code: 3c 1c 48 f7 d8 (...) This is because we are calling btrfs_free_tree_block() on an extent buffer that is dirty. Fix that by cleaning the extent buffer, with btrfs_clean_tree_block(), before freeing it. This was triggered by test case generic/475 from fstests. Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume") CC: [email protected] # 4.4+ Reviewed-by: Nikolay Borisov <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-12-15btrfs: fix invalid delayed ref after subvolume creation failureFilipe Manana6-22/+31
When creating a subvolume, at ioctl.c:create_subvol(), if we fail to insert the new root's root item into the root tree, we are freeing the metadata extent we reserved for the new root to prevent a metadata extent leak, as we don't abort the transaction at that point (since there is nothing at that point that is irreversible). However we allocated the metadata extent for the new root which we are creating for the new subvolume, so its delayed reference refers to the ID of this new root. But when we free the metadata extent we pass the root of the subvolume where the new subvolume is located to btrfs_free_tree_block() - this is incorrect because this will generate a delayed reference that refers to the ID of the parent subvolume's root, and not to ID of the new root. This results in a failure when running delayed references that leads to a transaction abort and a trace like the following: [3868.738042] RIP: 0010:__btrfs_free_extent+0x709/0x950 [btrfs] [3868.739857] Code: 68 0f 85 e6 fb ff (...) [3868.742963] RSP: 0018:ffffb0e9045cf910 EFLAGS: 00010246 [3868.743908] RAX: 00000000fffffffe RBX: 00000000fffffffe RCX: 0000000000000002 [3868.745312] RDX: 00000000fffffffe RSI: 0000000000000002 RDI: ffff90b0cd793b88 [3868.746643] RBP: 000000000e5d8000 R08: 0000000000000000 R09: ffff90b0cd793b88 [3868.747979] R10: 0000000000000002 R11: 00014ded97944d68 R12: 0000000000000000 [3868.749373] R13: ffff90b09afe4a28 R14: 0000000000000000 R15: ffff90b0cd793b88 [3868.750725] FS: 00007f281c4a8b80(0000) GS:ffff90b3ada00000(0000) knlGS:0000000000000000 [3868.752275] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [3868.753515] CR2: 00007f281c6a5000 CR3: 0000000108a42006 CR4: 0000000000370ee0 [3868.754869] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [3868.756228] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [3868.757803] Call Trace: [3868.758281] <TASK> [3868.758655] ? btrfs_merge_delayed_refs+0x178/0x1c0 [btrfs] [3868.759827] __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs] [3868.761047] btrfs_run_delayed_refs+0x86/0x210 [btrfs] [3868.762069] ? lock_acquired+0x19f/0x420 [3868.762829] btrfs_commit_transaction+0x69/0xb20 [btrfs] [3868.763860] ? _raw_spin_unlock+0x29/0x40 [3868.764614] ? btrfs_block_rsv_release+0x1c2/0x1e0 [btrfs] [3868.765870] create_subvol+0x1d8/0x9a0 [btrfs] [3868.766766] btrfs_mksubvol+0x447/0x4c0 [btrfs] [3868.767669] ? preempt_count_add+0x49/0xa0 [3868.768444] __btrfs_ioctl_snap_create+0x123/0x190 [btrfs] [3868.769639] ? _copy_from_user+0x66/0xa0 [3868.770391] btrfs_ioctl_snap_create_v2+0xbb/0x140 [btrfs] [3868.771495] btrfs_ioctl+0xd1e/0x35c0 [btrfs] [3868.772364] ? __slab_free+0x10a/0x360 [3868.773198] ? rcu_read_lock_sched_held+0x12/0x60 [3868.774121] ? lock_release+0x223/0x4a0 [3868.774863] ? lock_acquired+0x19f/0x420 [3868.775634] ? rcu_read_lock_sched_held+0x12/0x60 [3868.776530] ? trace_hardirqs_on+0x1b/0xe0 [3868.777373] ? _raw_spin_unlock_irqrestore+0x3e/0x60 [3868.778280] ? kmem_cache_free+0x321/0x3c0 [3868.779011] ? __x64_sys_ioctl+0x83/0xb0 [3868.779718] __x64_sys_ioctl+0x83/0xb0 [3868.780387] do_syscall_64+0x3b/0xc0 [3868.781059] entry_SYSCALL_64_after_hwframe+0x44/0xae [3868.781953] RIP: 0033:0x7f281c59e957 [3868.782585] Code: 3c 1c 48 f7 d8 4c (...) [3868.785867] RSP: 002b:00007ffe1f83e2b8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [3868.787198] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281c59e957 [3868.788450] RDX: 00007ffe1f83e2c0 RSI: 0000000050009418 RDI: 0000000000000003 [3868.789748] RBP: 00007ffe1f83f300 R08: 0000000000000000 R09: 00007ffe1f83fe36 [3868.791214] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000003 [3868.792468] R13: 0000000000000003 R14: 00007ffe1f83e2c0 R15: 00000000000003cc [3868.793765] </TASK> [3868.794037] irq event stamp: 0 [3868.794548] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [3868.795670] hardirqs last disabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.797086] softirqs last enabled at (0): [<ffffffff98294214>] copy_process+0x934/0x2040 [3868.798309] softirqs last disabled at (0): [<0000000000000000>] 0x0 [3868.799284] ---[ end trace be24c7002fe27747 ]--- [3868.799928] BTRFS info (device dm-0): leaf 241188864 gen 1268 total ptrs 214 free space 469 owner 2 [3868.801133] BTRFS info (device dm-0): refs 2 lock_owner 225627 current 225627 [3868.802056] item 0 key (237436928 169 0) itemoff 16250 itemsize 33 [3868.802863] extent refs 1 gen 1265 flags 2 [3868.803447] ref#0: tree block backref root 1610 (...) [3869.064354] item 114 key (241008640 169 0) itemoff 12488 itemsize 33 [3869.065421] extent refs 1 gen 1268 flags 2 [3869.066115] ref#0: tree block backref root 1689 (...) [3869.403834] BTRFS error (device dm-0): unable to find ref byte nr 241008640 parent 0 root 1622 owner 0 offset 0 [3869.405641] BTRFS: error (device dm-0) in __btrfs_free_extent:3076: errno=-2 No such entry [3869.407138] BTRFS: error (device dm-0) in btrfs_run_delayed_refs:2159: errno=-2 No such entry Fix this by passing the new subvolume's root ID to btrfs_free_tree_block(). This requires changing the root argument of btrfs_free_tree_block() from struct btrfs_root * to a u64, since at this point during the subvolume creation we have not yet created the struct btrfs_root for the new subvolume, and btrfs_free_tree_block() only needs a root ID and nothing else from a struct btrfs_root. This was triggered by test case generic/475 from fstests. Fixes: 67addf29004c5b ("btrfs: fix metadata extent leak after failure to create subvolume") CC: [email protected] # 4.4+ Reviewed-by: Nikolay Borisov <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-12-15btrfs: check WRITE_ERR when trying to read an extent bufferJosef Bacik1-0/+8
Filipe reported a hang when we have errors on btrfs. This turned out to be a side-effect of my fix c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it") which made it so we clear EXTENT_BUFFER_UPTODATE on an eb when we fail to write it out. Below is a paste of Filipe's analysis he got from using drgn to debug the hang """ btree readahead code calls read_extent_buffer_pages(), sets ->io_pages to a value while writeback of all pages has not yet completed: --> writeback for the first 3 pages finishes, we clear EXTENT_BUFFER_UPTODATE from eb on the first page when we get an error. --> at this point eb->io_pages is 1 and we cleared Uptodate bit from the first 3 pages --> read_extent_buffer_pages() does not see EXTENT_BUFFER_UPTODATE() so it continues, it's able to lock the pages since we obviously don't hold the pages locked during writeback --> read_extent_buffer_pages() then computes 'num_reads' as 3, and sets eb->io_pages to 3, since only the first page does not have Uptodate bit set at this point --> writeback for the remaining page completes, we ended decrementing eb->io_pages by 1, resulting in eb->io_pages == 2, and therefore never calling end_extent_buffer_writeback(), so EXTENT_BUFFER_WRITEBACK remains in the eb's flags --> of course, when the read bio completes, it doesn't and shouldn't call end_extent_buffer_writeback() --> we should clear EXTENT_BUFFER_UPTODATE only after all pages of the eb finished writeback? or maybe make the read pages code wait for writeback of all pages of the eb to complete before checking which pages need to be read, touch ->io_pages, submit read bio, etc writeback bit never cleared means we can hang when aborting a transaction, at: btrfs_cleanup_one_transaction() btrfs_destroy_marked_extents() wait_on_extent_buffer_writeback() """ This is a problem because our writes are not synchronized with reads in any way. We clear the UPTODATE flag and then we can easily come in and try to read the EB while we're still waiting on other bio's to complete. We have two options here, we could lock all the pages, and then check to see if eb->io_pages != 0 to know if we've already got an outstanding write on the eb. Or we can simply check to see if we have WRITE_ERR set on this extent buffer. We set this bit _before_ we clear UPTODATE, so if the read gets triggered because we aren't UPTODATE because of a write error we're guaranteed to have WRITE_ERR set, and in this case we can simply return -EIO. This will fix the reported hang. Reported-by: Filipe Manana <[email protected]> Fixes: c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it") CC: [email protected] # 5.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-12-15Merge tag 'wireless-drivers-2021-12-15' of ↵David S. Miller8-19/+24
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.16 Second set of fixes for v5.16, hopefully also the last one. I changed my email in MAINTAINERS, one crash fix in iwlwifi and some build problems fixed. iwlwifi * fix crash caused by a warning * fix LED linking problem brcmsmac * rework LED dependencies for being consistent with other drivers mt76 * mt7921: fix build regression ==================== Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.