aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-11-08media: v4l2-ctrl: Use p_const when possibleRicardo Ribalda Delgado1-8/+9
After adding a const pointer to ctrl_ptr, lets use it where it make sense. Suggested-by: Hans Verkuil <[email protected]> Signed-off-by: Ricardo Ribalda Delgado <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: Documentation: v42l_core: v4l2_ext_controlRicardo Ribalda Delgado1-0/+5
Describe p_area field from v4l2_ext_ctrl Signed-off-by: Ricardo Ribalda Delgado <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: v4l2_core: Add p_area to struct v4l2_ext_controlRicardo Ribalda Delgado1-0/+1
Allow accessing V4L2_CTRL_TYPE_AREA controls without any casting. Signed-off-by: Ricardo Ribalda Delgado <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: vivid: Add an area controlRicardo Ribalda Delgado1-0/+14
This control represents a generic read/write area. Suggested-by: Hans Verkuil <[email protected]> Signed-off-by: Ricardo Ribalda Delgado <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: v4l2_ctrl: Add const pointer to ctrl_ptrRicardo Ribalda Delgado1-0/+2
This pointer is used to point to data that is constant. Thanks to this we can avoid a lot of casting and we make more clear when the data is constant or variable. Suggested-by: Hans Verkuil <[email protected]> Signed-off-by: Ricardo Ribalda Delgado <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: v4l2_ctrl: Add p_def to v4l2_ctrl_configRicardo Ribalda Delgado2-1/+3
This allows setting the default value on compound controls created via v4l2_ctrl_new_custom. Signed-off-by: Ricardo Ribalda Delgado <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: exynos4-is: fix wrong mdev and v4l2 dev order in error pathSeung-Woo Kim1-3/+4
When driver is built as module and probe during insmod is deferred because of sensor subdevs, there is NULL pointer deference because mdev is cleaned up and then access it from v4l2_device_unregister(). Fix the wrong mdev and v4l2 dev order in error path of probe. This fixes below null pointer deference: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ca026f68 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM [...] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) PC is at ida_free+0x7c/0x160 LR is at xas_start+0x44/0x204 [...] [<c0dafd60>] (ida_free) from [<c083c20c>] (__media_device_unregister_entity+0x18/0xc0) [<c083c20c>] (__media_device_unregister_entity) from [<c083c2e0>] (media_device_unregister_entity+0x2c/0x38) [<c083c2e0>] (media_device_unregister_entity) from [<c0843404>] (v4l2_device_release+0xd0/0x104) [<c0843404>] (v4l2_device_release) from [<c0632558>] (device_release+0x28/0x98) [<c0632558>] (device_release) from [<c0db1204>] (kobject_put+0xa4/0x208) [<c0db1204>] (kct_put) from [<bf00bac4>] (fimc_capture_subdev_unregistered+0x58/0x6c [s5p_fimc]) [<bf00bac4>] (fimc_capture_subdev_unregistered [s5p_fimc]) from [<c084a1cc>] (v4l2_device_unregister_subdev+0x6c/0xa8) [<c084a1cc>] (v4l2_device_unregister_subdev) from [<c084a350>] (v4l2_device_unregister+0x64/0x94) [<c084a350>] (v4l2_device_unregister) from [<bf0101ac>] (fimc_md_probe+0x4ec/0xaf8 [s5p_fimc]) [...] Signed-off-by: Seung-Woo Kim <[email protected]> Reviewed-by: Sylwester Nawrocki <[email protected]> Fixes: 9832e155f1ed ("[media] media-device: split media initialization and registration") Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: vivid: Fix wrong locking that causes race conditions on streaming stopAlexander Popov3-9/+15
There is the same incorrect approach to locking implemented in vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out() and sdr_cap_stop_streaming(). These functions are called during streaming stopping with vivid_dev.mutex locked. And they all do the same mistake while stopping their kthreads, which need to lock this mutex as well. See the example from vivid_stop_generating_vid_cap(): /* shutdown control thread */ vivid_grab_controls(dev, false); mutex_unlock(&dev->mutex); kthread_stop(dev->kthread_vid_cap); dev->kthread_vid_cap = NULL; mutex_lock(&dev->mutex); But when this mutex is unlocked, another vb2_fop_read() can lock it instead of vivid_thread_vid_cap() and manipulate the buffer queue. That causes a use-after-free access later. To fix those issues let's: 1. avoid unlocking the mutex in vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out() and sdr_cap_stop_streaming(); 2. use mutex_trylock() with schedule_timeout_uninterruptible() in the loops of the vivid kthread handlers. Signed-off-by: Alexander Popov <[email protected]> Acked-by: Linus Torvalds <[email protected]> Tested-by: Hans Verkuil <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Cc: <[email protected]> # for v3.18 and up Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: vivid: add vivid_create_queue() helperHans Verkuil3-149/+116
Refactor some of the vivid_create_instance code by using a new vivid_create_queue() helper function. Also add some sanity checks for the node_types vs input/output_types module options. This patch resolves these two smatch parse errors: drivers/media/platform/vivid/vivid-core.c:1679 vivid_create_instance() parse error: OOM: 3002600Kb sm_state_count = 6160113 drivers/media/platform/vivid/vivid-core.c: drivers/media/platform/vivid/vivid-core.c:1679 vivid_create_instance() parse error: __split_smt: function too hairy. Giving up after 33 seconds Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: siano: fix spelling mistake "ENBALE" -> "ENABLE"Colin Ian King2-4/+4
Macros MSG_SMS_ENBALE_TS_INTERFACE_REQ and MSG_SMS_ENBALE_TS_INTERFACE_RES contain a spelling mistake. Fix these by replacing ENBALE with ENABLE. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: mantis: fix two smatch errorsHans Verkuil2-6/+2
Drop two dprintk's that relied on a non-NULL mantis pointer when it was in fact a NULL pointer. Fix those warnings: drivers/media/pci/mantis/mantis_cards.c:73 mantis_irq_handler() error: we previously assumed 'mantis' could be null (see line 72) drivers/media/pci/mantis/hopper_cards.c:64 hopper_irq_handler() error: we previously assumed 'mantis' could be null (see line 63) Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: ov6650: fix smatch warningHans Verkuil1-1/+1
Initialize ret to 0 to fix this smatch error: drivers/media/i2c/ov6650.c:853 ov6650_video_probe() error: uninitialized symbol 'ret'. Signed-off-by: Hans Verkuil <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: ti-vpe: fix smatch errorHans Verkuil1-1/+1
This patch fixes this error: drivers/media/platform/ti-vpe/vpdma.c:767 dump_dtd() error: '%pad' expects argument of type 'dma_addr_t*', argument 2 has type 'uint*' dtd->start_addr is a u32, so no need for %pad. Signed-off-by: Hans Verkuil <[email protected]> Reviewed-by: Benoit Parrot <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: em28xx: fix two smatch warningsHans Verkuil1-2/+2
Use sizeof instead of ARRAY_SIZE to fix this smatch warning: drivers/media/usb/em28xx/em28xx-i2c.c:952 em28xx_do_i2c_scan() warn: calling memset(x, y, ARRAY_SIZE()); Do the same for the em28xx_hash_mem() call in the same function. smatch didn't pick that up, but there too it should use sizeof instead of ARRAY_SIZE. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: rc/ite-cir: fix smatch warningHans Verkuil1-1/+1
Use sizeof instead of ARRAY_SIZE to fix this smatch warning: drivers/media/rc/ite-cir.c:385 ite_tx_ir() warn: calling memset(x, y, ARRAY_SIZE()); Signed-off-by: Hans Verkuil <[email protected]> Acked-by: Sean Young <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-08media: mtk-vpu: fix two smatch warningsHans Verkuil1-2/+2
Drop the "id >= 0" test in two conditions to fix these warnings: drivers/media/platform/mtk-vpu/mtk_vpu.c:276 vpu_ipi_register() warn: always true condition '(id >= 0) => (0-u32max >= 0)' drivers/media/platform/mtk-vpu/mtk_vpu.c:401 vpu_wdt_reg_handler() warn: always true condition '(id >= 0) => (0-u32max >= 0)' Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: am437x: fix smatch warningHans Verkuil1-1/+0
Fixes this warning: drivers/media/platform/am437x/am437x-vpfe.c:288 vpfe_ccdc_validate_param() warn: unsigned 'ccdcparam->alaw.gamma_wd' is never less than zero. by dropping the gamma_wd < VPFE_CCDC_GAMMA_BITS_15_6 check since VPFE_CCDC_GAMMA_BITS_15_6 is 0. Signed-off-by: Hans Verkuil <[email protected]> Reviewed-by: Benoit Parrot <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: vivid: media_device_cleanup was called too earlyHans Verkuil1-1/+3
Running the contrib/test/test-media script in v4l-utils with the vivid argument will cause this kernel warning: [ 104.748720] videodev: v4l2_release [ 104.748731] ------------[ cut here ]------------ [ 104.748750] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 104.748790] WARNING: CPU: 6 PID: 1823 at kernel/locking/mutex.c:938 __mutex_lock+0x919/0xc10 [ 104.748800] Modules linked in: rc_cec vivid v4l2_tpg videobuf2_dma_contig cec rc_core v4l2_dv_timings videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc vmw_balloon vmw_vmci button vmwgfx [ 104.748845] CPU: 6 PID: 1823 Comm: sleep Not tainted 5.4.0-rc1-test-no #150 [ 104.748853] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/29/2019 [ 104.748867] RIP: 0010:__mutex_lock+0x919/0xc10 [ 104.748878] Code: 59 83 e8 9a fc 16 ff 44 8b 05 23 61 38 01 45 85 c0 0f 85 ef f7 ff ff 48 c7 c6 a0 1f 87 82 48 c7 c7 a0 1e 87 82 e8 cd bb f7 fe <0f> 0b e9 d5 f7 ff ff f6 c3 04 0f 84 3b fd ff ff 49 89 df 41 83 e7 [ 104.748886] RSP: 0018:ffff88811a357b80 EFLAGS: 00010286 [ 104.748895] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 104.748902] RDX: 0000000000000003 RSI: 0000000000000004 RDI: ffffed102346af62 [ 104.748910] RBP: ffff88811a357cf0 R08: ffffffff81217c91 R09: fffffbfff061c271 [ 104.748917] R10: fffffbfff061c270 R11: ffffffff830e1383 R12: ffff8881a46103c0 [ 104.748924] R13: 0000000000000000 R14: ffff8881a4614f90 R15: ffff8881a46153d0 [ 104.748933] FS: 0000000000000000(0000) GS:ffff8881b6780000(0000) knlGS:0000000000000000 [ 104.748940] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 104.748949] CR2: 00007f163fc9ca20 CR3: 0000000003013004 CR4: 00000000001606e0 [ 104.749036] Call Trace: [ 104.749051] ? _raw_spin_unlock+0x1f/0x30 [ 104.749067] ? llist_add_batch+0x33/0x50 [ 104.749081] ? tick_nohz_tick_stopped+0x19/0x30 [ 104.749130] ? v4l2_release.cold+0x6c/0xd6 [videodev] [ 104.749143] ? mutex_lock_io_nested+0xb80/0xb80 [ 104.749153] ? vprintk_emit+0xf2/0x220 [ 104.749191] ? vivid_req_validate+0x40/0x40 [vivid] [ 104.749201] ? printk+0xad/0xde [ 104.749211] ? kmsg_dump_rewind_nolock+0x54/0x54 [ 104.749226] ? locks_remove_file+0x78/0x2b0 [ 104.749248] ? __fsnotify_update_child_dentry_flags.part.0+0x170/0x170 [ 104.749281] ? vivid_req_validate+0x40/0x40 [vivid] [ 104.749321] ? v4l2_release.cold+0x6c/0xd6 [videodev] [ 104.749361] v4l2_release.cold+0x6c/0xd6 [videodev] [ 104.749378] __fput+0x15a/0x390 [ 104.749393] task_work_run+0xb2/0xe0 [ 104.749407] do_exit+0x4d0/0x1200 [ 104.749422] ? do_user_addr_fault+0x367/0x610 [ 104.749431] ? release_task+0x990/0x990 [ 104.749449] ? rwsem_spin_on_owner+0x170/0x170 [ 104.749463] ? vmacache_find+0xb2/0x100 [ 104.749476] do_group_exit+0x85/0x130 [ 104.749487] __x64_sys_exit_group+0x23/0x30 [ 104.749500] do_syscall_64+0x5e/0x1c0 [ 104.749511] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 104.749520] RIP: 0033:0x7f163fc5c9d6 [ 104.749536] Code: Bad RIP value. [ 104.749543] RSP: 002b:00007ffe6f3bec58 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 104.749553] RAX: ffffffffffffffda RBX: 00007f163fd4d760 RCX: 00007f163fc5c9d6 [ 104.749560] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [ 104.749567] RBP: 0000000000000000 R08: 00000000000000e7 R09: ffffffffffffff80 [ 104.749574] R10: 00007ffe6f3beb24 R11: 0000000000000246 R12: 00007f163fd4d760 [ 104.749581] R13: 0000000000000002 R14: 00007f163fd56428 R15: 0000000000000000 [ 104.749597] ---[ end trace 66f20f73fc0daf79 ]--- This is caused by media_device_cleanup() which destroys v4l2_dev->mdev->req_queue_mutex. But v4l2_release() tries to lock that mutex after media_device_cleanup() is called. By moving media_device_cleanup() to the v4l2_device's release function it is guaranteed that the mutex is valid whenever v4l2_release is called. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: vimc: Make capture devices and subdevices use different link_validatesNícolas F. R. A. Prado3-45/+46
Instead of validating the links to capture devices and subdevices with the same function, use the default v4l function for links between subdevices and only use a different function for validating between capture device and subdevice. This change should also ease future work to associate multiple mbus codes for the same pixelformat in vimc_pix_map. These changes were tested with v4l2-compliance SHA: 3f806630e2ecbcebe31872b865c5c4b42f111a99, 64 bits and passed all tests: Grand Total for vimc device /dev/media0: 451, Succeeded: 451, Failed: 0, Warnings: 0 Signed-off-by: Nícolas F. R. A. Prado <[email protected]> Acked-by: Helen Koike <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: hi556: Add support for Hi-556 sensorShawn Tu4-0/+1220
Add a V4L2 sub-device driver for Hynix Hi-556 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 2592x1944 at 30FPS + 1296x972 at 30FPS [[email protected]: Remove MEDIA_CAMERA_SUPPORT from Kconfig dependencies] Signed-off-by: Shawn Tu <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: staging/imx: Use a shorter name for driverFabio Estevam1-2/+4
Currently v4l2-compliance tool returns the following output: Compliance test for imx-media-captu device /dev/video0: Driver Info: Driver name : imx-media-captu Card type : imx-media-capture ... The driver name string is limited to 16 characters, so provide a shorter name so that we can have a better output. While at it, use the same shorter name for driver and card. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: staging: media: allegro-dvt: remove bool comparisonCristiane Naves1-1/+1
Bool tests don't need comparisons. Issue found by coccicheck. Signed-off-by: Cristiane Naves <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: s5p-jpeg: drop unused components from s5p_jpeg_q_dataPhilipp Zabel2-3/+0
The number of components are only set, and never used. Signed-off-by: Philipp Zabel <[email protected]> Reviewed-by: Jacek Anaszewski <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: dt-bindings: rcar_vin: Document RZ/G1 per-board settingsGeert Uytterhoeven1-2/+2
The R-Car Gen2 per-board settings apply to RZ/G1, too. Fixes: 1d14a5eaa156b0b3 ("media: dt-bindings: media: rcar_vin: add device tree support for r8a774[35]") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: fdp1: Fix R-Car M3-N naming in debug messageGeert Uytterhoeven1-1/+1
The official name is "R-Car M3-N", not "R-Car M3N". Fixes: 4e8c120de9268fc2 ("media: fdp1: Support M3N and E3 platforms") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Kieran Bingham <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: bt819: Reduce amount of F* words in the worldAndy Shevchenko1-1/+1
Replace F* word with something less offensive. [hverkuil: dropped 'Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")' tag since nothing was broken] Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: coda: request to skip kernel mapping for decoded buffersLucas Stach1-0/+1
The kernel driver never touches the decoded buffers with the CPU. All accesses are either done by hardware DMA masters or userspace mapping the buffers. This means we don't need a kernel virtual address mapping for those buffers at all. As those buffers are usually quite large, we can save a good deal of kernel vmalloc space by requesting to not have a kernel mapping set up for them. Signed-off-by: Lucas Stach <[email protected]> Signed-off-by: Philipp Zabel <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: coda: fix deadlock between decoder picture run and start commandPhilipp Zabel1-2/+2
The BIT decoder picture run temporarily locks the bitstream mutex while the coda device mutex is locked, to refill the bitstream ring buffer. Consequently, the decoder start command, which locks both mutexes when flushing the bitstream ring buffer, must lock the coda device mutex first as well, to avoid an ABBA deadlock. Fixes: e7fd95849b3c ("media: coda: flush bitstream ring buffer on decoder restart") Signed-off-by: Philipp Zabel <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: v4l2-core: fix touch support in v4l_g_fmtVandana BN1-15/+18
v4l_s_fmt, for VFL_TYPE_TOUCH, sets unneeded members of the v4l2_pix_format structure to default values.This was missing in v4l_g_fmt, which would lead to failures in v4l2-compliance tests. Signed-off-by: Vandana BN <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: v4l2-subdev: Don't use __u32 internallyJanusz Krzysztofik1-3/+3
Commit a8fa55078a77 ("media: v4l2-subdev: Verify arguments in v4l2_subdev_call()") and commit 374d62e7aa50 ("media: v4l2-subdev: Verify v4l2_subdev_call() pad config argument") introduced a few local functions, unfortunately with arguments of type __u32, reserved for use in Linux uAPI. Use u32 instead. Suggested-by: Sakari Ailus <[email protected]> Signed-off-by: Janusz Krzysztofik <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: exynos4-is: Fix recursive locking in isp_video_release()Seung-Woo Kim1-1/+1
>From isp_video_release(), &isp->video_lock is held and subsequent vb2_fop_release() tries to lock vdev->lock which is same with the previous one. Replace vb2_fop_release() with _vb2_fop_release() to fix the recursive locking. Fixes: 1380f5754cb0 ("[media] videobuf2: Add missing lock held on vb2_fop_release") Signed-off-by: Seung-Woo Kim <[email protected]> Reviewed-by: Sylwester Nawrocki <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: rcar_drif: fix a memory disclosureKangjie Lu1-0/+1
"f->fmt.sdr.reserved" is uninitialized. As other peer drivers like msi2500 and airspy do, the fix initializes it to avoid memory disclosures. Signed-off-by: Kangjie Lu <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: staging: media: cedrus: use devm_platform_ioremap_resource() to ↵YueHaibing1-3/+1
simplify code Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <[email protected]> Acked-by: Paul Kocialkowski <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: rcar-csi2: Enable support for R8A774B1Biju Das1-0/+4
Add the MIPI CSI-2 driver support for RZ/G2N(R8A774B1) SoC. The CSI-2 module of RZ/G2N is similar to R-Car M3-N. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: rcar-vin: Enable support for R8A774B1Biju Das1-0/+4
Add the SoC specific information for RZ/G2N(R8A774B1) SoC. The VIN module of RZ/G2N is similar to R-Car M3-N. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: dt-bindings: rcar-csi2: Add R8A774B1 supportBiju Das1-0/+1
Add the compatible string for RZ/G2N (R8A774B1) to the list of supported SoCs. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: dt-bindings: rcar-vin: Add R8A774B1 supportBiju Das1-0/+1
Document support for the VIN module in the Renesas RZ/G2N (R8A774B1) SoC. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: rcar-vin: Add support for outputting NV12Niklas Söderlund2-7/+37
Most Gen3 boards can output frames in NV12 format, add support for this with a runtime check that the running hardware supports it. Signed-off-by: Niklas Söderlund <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: rcar-vin: Define which hardware supports NV12Niklas Söderlund2-0/+8
Most but not all Gen3 hardware support outputting NV12, add a flag to indicate which SoCs do support it. Signed-off-by: Niklas Söderlund <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: rcar-vin: Do not enumerate unsupported pixel formatsNiklas Söderlund1-5/+15
If a pixel format is not supported by the hardware NULL is returned by rvin_format_from_pixel() for that fourcc. Verify that the pixel format is supported using this or skip it when enumerating. Signed-off-by: Niklas Söderlund <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: radio: wl1273: fix interrupt masking on releaseJohan Hovold1-2/+1
If a process is interrupted while accessing the radio device and the core lock is contended, release() could return early and fail to update the interrupt mask. Note that the return value of the v4l2 release file operation is ignored. Fixes: 87d1a50ce451 ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver") Cc: stable <[email protected]> # 2.6.38 Cc: Matti Aaltonen <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: bdisp: fix memleak on releaseJohan Hovold1-2/+1
If a process is interrupted while accessing the video device and the device lock is contended, release() could return early and fail to free related resources. Note that the return value of the v4l2 release file operation is ignored. Fixes: 28ffeebbb7bd ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework") Cc: stable <[email protected]> # 4.2 Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Fabien Dessenne <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: v4l2-dv-timings: Use DIV_ROUND_CLOSEST directly to make it readablezhong jiang1-1/+1
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. Signed-off-by: zhong jiang <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: vpx3220: make array input_vals static, makes object smallerColin Ian King1-1/+1
Don't populate the array input_vals on the stack but instead make it static. Makes the object code smaller by 106 bytes. Before: text data bss dec hex filename 11744 3536 128 15408 3c30 drivers/media/i2c/vpx3220.o After: text data bss dec hex filename 11574 3600 128 15302 3bc6 drivers/media/i2c/vpx3220.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: MAINTAINERS: Update MAX2175 & R-Car DRIF driver maintainer emailChris Paterson1-2/+2
Ramesh is now using a new email address. Update the maintainer entry for the MAX2175 SDR tuner and the Renesas R-Car DRIF drivers. Signed-off-by: Chris Paterson <[email protected]> Acked-by: Ramesh Shanmugasundaram <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: xilinx: Use the correct style for SPDX License IdentifierNishad Kamdar4-4/+4
This patch corrects the SPDX License Identifier style in header files related to Video drivers for Xilinx devices. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Nishad Kamdar <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: imx7-mipi-csis: make array 'registers' static const, makes object smallerColin Ian King1-1/+1
Don't populate the array 'registers' on the stack but instead make it static const. Makes the object code smaller by 10 bytes. Before: text data bss dec hex filename 20138 5196 128 25462 6376 staging/media/imx/imx7-mipi-csis.o After: text data bss dec hex filename 20032 5292 128 25452 636c staging/media/imx/imx7-mipi-csis.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Rui Miguel Silva <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: cx231xx: remove redundant assignment to variable statusColin Ian King1-1/+1
Variable status is being initialized with a value that is never read and is being re-assigned a later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: smiapp: unlock on error in smiapp_start_streaming()Dan Carpenter1-2/+2
We added two new error paths to smiapp_start_streaming(), but we can't return directly without dropping the "sensor->mutex" lock. Fixes: f8c4352c1bef ("media: smiapp: Move binning configuration to streaming start") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2019-11-05media: staging/intel-ipu3: remove the unnecessary compiler flagsBingbu Cao2-8/+0
Currently, we can build ipu3 driver code without any warnings with W=1, so the extra compiler flags in Makefile and the item in TODO file can be removed. Signed-off-by: Bingbu Cao <[email protected]> Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.