| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This includes a hack for the device as it returns only 0xff after a new
firmware is loaded. To quote Mauro:
"When the [...] firmware that came with the device is replaced
by a new one, any I2C data received from the tuner will be
replaced by 0xff.
Probably, the vendor firmware has some patch specifically
designed for this device. So, we can't replace by the generic
firmware.
The right solution would be to extract the [...] firmware from
the original driver and ask the driver to load the specifically
designed firmware, but, while we don't have that, the next best
solution is to just keep the original firmware at the device."
Signed-off-by: Gon Solo <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
While at it, convert to kernel-doc format and use bits instead of bools.
Signed-off-by: Gon Solo <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
A very old patch sent to the media ML used to contain the
I2C speed formula:
https://lore.kernel.org/linux-media/1312539895.2763.33.camel@Jason-Linux/
When the ite9135 code was merged with af9035, the formula was
lost. As we might need to slow down the speed for some devices,
add the formula again.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Using bool on struct is not recommended, as it wastes lots of
space. So, instead, let's use bits.
While here, convert the comments to kernel-doc format.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
As reported by [email protected], the build with i386 fails
with:
ld: drivers/media/platform/qcom/venus/helpers.o: in function `venus_helper_load_scale_clocks':
(.text+0x1d77): undefined reference to `__udivdi3'
ld: (.text+0x1dce): undefined reference to `__udivdi3'
make: *** [Makefile:1094: vmlinux] Error 1
That's because it divides an u32 bit integer by a u64 one.
Reviewed-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
When the new CEC_OP_UI_CMD defines were added I forgot to update this
header to use these new defines. This is now fixed.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The CEC_MSG_GIVE_DECK_STATUS and CEC_MSG_GIVE_TUNER_DEVICE_STATUS commands
both have a status_req argument: ON, OFF, ONCE. If ON or ONCE, then the
follower will reply with a STATUS message. Either once or whenever the
status changes (status_req == ON).
If status_req == OFF, then it will stop sending continuous status updates,
but the follower will *not* send a STATUS message in that case.
This means that if status_req == OFF, then msg->reply should be 0 as well
since no reply is expected in that case.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
If usb_set_interface() failed, iface->cur_altsetting will
not be assigned and it will be used in flexcop_usb_transfer_init()
It may lead a NULL pointer dereference.
Check usb_set_interface() return value in flexcop_usb_init()
and return failed to avoid using this NULL pointer.
Signed-off-by: Yang Yingliang <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Support Friio devices to read from tuner via demod tc90522,
by enabling the config option.
Signed-off-by: Akihiro Tsukada <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This demod implements an i2c adapter for attached tuner
and relays i2c messages from users (dvb adapters / bridge chips).
Some of them, such as Friio dvb card using gl861,
require each pair of i2c messages for one read to be issued as
two separate transactions.
This patch adds a configuration option to enable this split.
Signed-off-by: Akihiro Tsukada <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The header contained just internal definitions
and they are not used anymore.
Signed-off-by: Akihiro Tsukada <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
For Friio dvb cards, a distinct I2C algo was provided to support
some "long" I2C messages used in relaying tuner I2C via demod.
Since the other (generic) i2c algo in this module has been patched
to support those messages in a more generic way,
this patch replaces and integrates the device-specific i2c algo
with the generic one and simplifies the code.
Signed-off-by: Akihiro Tsukada <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Device I2C adapter is capable of writing and reading large messages.
For I2C writes there is 2 methods: simple for max 2 byte messages and
usb_control_msg() with payload data for larger I2C messages. Add I2C
adapter logic which selects suitable method according to message size.
Add also support for plain I2C read.
Cc: Akihiro TSUKADA <[email protected]>
Signed-off-by: Antti Palosaari <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Re-use usb_mutex from dvb_usb_device for this.
Tested-by: Jan Pieter van Woerkom <[email protected]>
Signed-off-by: Andrei Koshkosh <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The variable rc is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This patch corrects the SPDX License Identifier style
in header files for TV Master Media USB Adapter drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <[email protected]>
Signed-off-by: Nishad Kamdar <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Simplify this function implementation by using a known wrapper function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <[email protected]>
Acked-by: Mans Rullgard <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This patch corrects the SPDX License Identifier style
in header file related to Remote Controller Driver for Linux.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <[email protected]>
Signed-off-by: Nishad Kamdar <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
In cx23888_ir_probe if kfifo_alloc fails the allocated memory for state
should be released.
Signed-off-by: Navid Emamdoost <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add support for Magix Wideowandler 2 - analog USB capture card
Signed-off-by: Dominik Danelski <[email protected]>
Co-author: Cornelius Porosanu <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Don't populate the array tab on the stack but instead make it
static const. Makes the object size smaller by 170 bytes in total.
Before:
text data bss dec hex filename
7045 1736 0 8781 224d media/dvb-frontends/cxd2820r_c.o
8800 2216 0 11016 2b08 media/dvb-frontends/cxd2820r_t.o
8981 2120 0 11101 2b5d media/dvb-frontends/cxd2820r_t2.o
After:
text data bss dec hex filename
6896 1832 0 8728 2218 media/dvb-frontends/cxd2820r_c.o
8651 2312 0 10963 2ad3 media/dvb-frontends/cxd2820r_t.o
8853 2184 0 11037 2b1d media/dvb-frontends/cxd2820r_t2.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Currently the IR receiver is put into idle mode after each interrupt.
However longer IR like NEC can be distributed over multiple interrupts,
so putting the IR into idle in the middle of such a message will break
decoding.
Every IR message has a trailing space of 0xbf (one less than
IR_IDE_LEN{0,1} which is programmed to 0xc0). So, set the timeout to that
value and rc-core will put the IR receiver into idle mode automatically.
Thanks to Jan Pieter van Woerkom <[email protected]> for providing the hardware.
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Thanks to Jan Pieter van Woerkom <[email protected]> for providing the hardware.
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The device it's an iMON UltraBay (0x98 in config byte) with LCD,
IR and dual-knobs front panel.
To work properly the device also require its own key table,
and repeat suppression for all buttons.
Signed-off-by: Flavius Georgescu <[email protected]>
Co-developed-by: Chris Vandomelen <[email protected]>
Signed-off-by: Chris Vandomelen <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Fix multiple cases of out of bounds (OOB) read associated with
MCE device receive/input data handling.
In reference for the OOB cases below, the incoming/read (byte) data
format when the MCE device responds to a command is:
{ cmd_prefix, subcmd, data0, data1, ... }
where cmd_prefix are:
MCE_CMD_PORT_SYS
MCE_CMD_PORT_IR
and subcmd examples are:
MCE_RSP_GETPORTSTATUS
MCE_RSP_EQIRNUMPORTS
...
Response size dynamically depends on cmd_prefix and subcmd.
So data0, data1, ... may or may not be present on input.
Multiple responses may return in a single receiver buffer.
The trigger condition for OOB read is typically random or
corrupt input data that fills the mceusb receiver buffer.
Case 1:
mceusb_handle_command() reads data0 (var hi) and data1 (var lo)
regardless of whether the response includes such data.
If { cmd_prefix, subcmd } is at the end of the receiver buffer,
read past end of buffer occurs.
This case was reported by
KASAN: slab-out-of-bounds Read in mceusb_dev_recv
https://syzkaller.appspot.com/bug?extid=c7fdb6cb36e65f2fe8c9
Fix: In mceusb_handle_command(), change variable hi and lo to
pointers, and dereference only when required.
Case 2:
If response with data is truncated at end of buffer after
{ cmd_prefix, subcmd }, mceusb_handle_command() reads past
end of buffer for data0, data1, ...
Fix: In mceusb_process_ir_data(), check response size with
remaining buffer size before invoking mceusb_handle_command().
+ if (i + ir->rem < buf_len)
mceusb_handle_command(ir, &ir->buf_in[i - 1]);
Case 3:
mceusb_handle_command() handles invalid/bad response such as
{ 0x??, MCE_RSP_GETPORTSTATUS } of length 2 as a response
{ MCE_CMD_PORT_SYS, MCE_RSP_GETPORTSTATUS, data0, ... }
of length 7. Read OOB occurs for non-existent data0, data1, ...
Cause is mceusb_handle_command() does not check cmd_prefix value.
Fix: mceusb_handle_command() must test both cmd_prefix and subcmd.
Case 4:
mceusb_process_ir_data() receiver parser state SUBCMD is
possible at start (i=0) of receiver buffer resulting in buffer
offset=-1 passed to mceusb_dev_printdata().
Bad offset results in OOB read before start of buffer.
[1214218.580308] mceusb 1-1.3:1.0: rx data[0]: 00 80 (length=2)
[1214218.580323] mceusb 1-1.3:1.0: Unknown command 0x00 0x80
...
[1214218.580406] mceusb 1-1.3:1.0: rx data[14]: 7f 7f (length=2)
[1214218.679311] mceusb 1-1.3:1.0: rx data[-1]: 80 90 (length=2)
[1214218.679325] mceusb 1-1.3:1.0: End of raw IR data
[1214218.679340] mceusb 1-1.3:1.0: rx data[1]: 7f 7f (length=2)
Fix: If parser_state is SUBCMD after processing receiver buffer,
reset parser_state to CMD_HEADER.
In effect, discard cmd_prefix at end of receiver buffer.
In mceusb_dev_printdata(), abort if buffer offset is out of bounds.
Case 5:
If response with data is truncated at end of buffer after
{ cmd_prefix, subcmd }, mceusb_dev_printdata() reads past
end of buffer for data0, data1, ...
while decoding the response to print out.
Fix: In mceusb_dev_printdata(), remove unneeded buffer offset
adjustments (var start and var skip) associated with MCE gen1 header.
Test for truncated MCE cmd response (compare offset+len with buf_len)
and skip decoding of incomplete response.
Move IR data tracing to execute before the truncation test.
Signed-off-by: A Sun <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Decoding often fails on e.g. redrat3 devices. The dev_dbg() helps
with debugging when decoding does fail.
Cc: Patrick Lerda <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
libinput refuses pointer movement from rc-core, since it believes it's not
a pointer-type device:
libinput error: event17 - Media Center Ed. eHome Infrared Remote Transceiver (1784:0008): libinput bug: REL_X/Y from a non-pointer device
Fixes: 158bc148a31e ("media: rc: mce_kbd: input events via rc-core's input device")
Fixes: 0ac5a603a732 ("media: rc: imon: report mouse events using rc-core's input device")
Cc: [email protected] # 4.20+
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
procfs is no longer used anywhere in media.
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This moves /proc/saa7164 to /sys/kernel/debug/saa7164.
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
When probed after the HDMI notifier, calling cec_notifier_cec_adap_register()
calls the enable() adapter callback, but the HW is not yet set up.
Moving cec_notifier_cec_adap_register() right before cec_register_adapter()
fixes the following crash:
Ignoring spurious kernel translation fault at virtual address 0000000000000008
[...]
Hardware name: Khadas VIM (DT)
[...]
pc : __do_kernel_fault+0xdc/0x120
lr : __do_kernel_fault+0xdc/0x120
[...]
Call trace:
__do_kernel_fault+0xdc/0x120
do_page_fault+0x180/0x458
do_translation_fault+0x64/0x70
do_mem_abort+0x3c/0x98
el1_da+0x20/0x94
meson_ao_cec_adap_enable+0x30/0x218 [ao_cec]
__cec_s_phys_addr+0x184/0x270
cec_s_phys_addr+0x44/0x60
cec_notifier_cec_adap_register+0x68/0x90
meson_ao_cec_probe+0xb0/0x288 [ao_cec]
[...]
el0_svc_compat+0x8/0x10
Reported-by: Christian Hewitt <[email protected]>
Suggested-by: Hans Verkuil <[email protected]>
Fixes: 20958f9d5c48 ("media: meson/ao-cec: use cec_notifier_cec_adap_(un)register")
Signed-off-by: Neil Armstrong <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Current clock scaling calculations are same for vpu4 and
previous versions. For vpu4, Clock scaling calculations
are updated with cycles/mb and bitrate. This helps in
getting precise clock required.
Signed-off-by: Aniket Masule <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add vpp cycles for different types of codec.
It indicates the cycles required by video hardware
to process each macroblock. Add vsp cycles, cycles
required by stream processor. Initialize the codec
data with core resources.
Signed-off-by: Aniket Masule <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Failure to suspend (venus_suspend_3xx) happens when the system
is fresh booted and loading venus driver. This happens once and
after reload the venus driver modules the problem disrepair.
Fix the failure by skipping the check for WFI and IDLE bits if
PC_READY is on in control status register.
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This aims to add a requests for bandwidth scaling depending
on the resolution and framerate (macroblocks per second). The
exact value of the requested bandwidth is get from a
pre-calculated tables for encoder and decoder.
Acked-by: Georgi Djakov <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
In downstream driver, there are two frequency tables defined,
one for the encoder and one for the decoder:
/* Encoders /
<972000 490000000 0x55555555>, / 4k UHD @ 30 /
<489600 320000000 0x55555555>, / 1080p @ 60 /
<244800 150000000 0x55555555>, / 1080p @ 30 /
<108000 75000000 0x55555555>, / 720p @ 30 */
/* Decoders /
<1944000 490000000 0xffffffff>, / 4k UHD @ 60 /
< 972000 320000000 0xffffffff>, / 4k UHD @ 30 /
< 489600 150000000 0xffffffff>, / 1080p @ 60 /
< 244800 75000000 0xffffffff>; / 1080p @ 30 */
It shows that encoder always needs a higher clock than decoder.
In current venus driver, the unified frequency table is aligned
with the downstream decoder table which causes performance issues
in encoding scenarios. Fix that by aligning frequency table on
worst case (encoding).
Signed-off-by: Loic Poulain <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Switch to SPDX licensing and drop the redundant GPL text.
Signed-off-by: Benoit Parrot <[email protected]>
Acked-by: Lad, Prabhakar <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The initial registers sequence is only loaded at probe
time. Afterward only the resolution and format specific
register are modified. Care must be taken to make sure
registers modified by one resolution setting are reverted
back when another resolution is programmed.
This was not done properly for the 720p case.
Signed-off-by: Benoit Parrot <[email protected]>
Acked-by: Lad, Prabhakar <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
On some board it is possible that the sensor 'powerdown' and or 'reset'
pin might be controlled by gpio instead of being tied.
To implement we add pm_runtime support which will handle the power
up/down sequence when it is available otherwise the sensor will be
powered on at module insertion/probe and powered off at module removal.
Now originally the driver assumed that the sensor would always stay
powered and keep its register setting. We cannot assume this anymore, so
every time we "power up" we need to re-program the initial registers
configuration first. This was previously done only at probe time.
[Sakari Ailus: Resolve a conflict in Kconfig]
Signed-off-by: Benoit Parrot <[email protected]>
Acked-by: Lad, Prabhakar <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add powerdown-gpios and reset-gpios to the list of optional properties
for the OV2659 camera sensor.
Signed-off-by: Benoit Parrot <[email protected]>
Acked-by: Lad, Prabhakar <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
In ov2659_s_stream() return value for invoked function should be checked
and propagated.
Signed-off-by: Benoit Parrot <[email protected]>
Acked-by: Lad, Prabhakar <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Several of include files listed are not explicitly needed.
If they are need then they are implicitly included.
Reduce the list of includes to an easier to manage list.
Signed-off-by: Benoit Parrot <[email protected]>
Acked-by: Lad, Prabhakar <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
present
Make sure that if the expected sensor device id register
is not recognized properly the failure is propagated
up so devices are not left partially initialized.
Signed-off-by: Benoit Parrot <[email protected]>
Signed-off-by: Jyri Sarha <[email protected]>
Acked-by: Lad, Prabhakar <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Based on recently found sensor configuration examples, it was
discovered that when scaling and binning are used for the lower
resolutions (i.e. 640x480, 320x240) the read offset has to be
increased otherwise the image appears to be wrapped around.
Signed-off-by: Benoit Parrot <[email protected]>
Signed-off-by: Jyri Sarha <[email protected]>
Acked-by: Lad, Prabhakar <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
This patch adds support for registering a sensor sub-device to the async
sub-device framework and parse set up common sensor related devices such as
actuator/VCM.
[Sakari Ailus: Rewrap commit message]
Signed-off-by: Dongchun Zhu <[email protected]>
Reviewed-by: Tomasz Figa <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Assign vep->link_frequencies to NULL after releasing its memory. Without
this change, multiple calls to v4l2_fwnode_endpoint_free() would result in
double kfree calls.
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Instead of individually depending on MEDIA_CAMERA_SUPPORT (or forgetting
it), put all camera sensor, lens and flash drivers under
MEDIA_CAMERA_SUPPORT as a whole. The lens VCM devices didn't use to do
this, but make them depend on MEDIA_CAMERA_SUPPORT as well since there's
no use for these devices without that in practice.
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The driver stores crop rectangle settings supposed to be in line with
hardware state in a device private structure. Since the driver initial
submission, crop rectangle width and height settings are not updated
correctly when rectangle offset settings are applied on hardware. If
an error occurs while the device is updated, the stored settings my no
longer reflect hardware state and consecutive calls to .get_selection()
as well as .get/set_fmt() may return incorrect information. That in
turn may affect ability of a bridge device to use correct DMA transfer
settings if such incorrect informamtion on active frame format returned
by .get/set_fmt() is used.
Assuming a failed update of the device means its actual settings haven't
changed, update crop rectangle width and height settings stored in the
device private structure correctly while the rectangle offset is
successfully applied on hardware so the stored values always reflect
actual hardware state to the extent possible.
Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
The driver stores frame format settings supposed to be in line with
hardware state in a device private structure. Since the driver initial
submission, those settings are updated before they are actually applied
on hardware. If an error occurs on device update, the stored settings
my not reflect hardware state anymore and consecutive calls to
.get_fmt() may return incorrect information. That in turn may affect
ability of a bridge device to use correct DMA transfer settings if such
incorrect informmation on active frame format returned by .get_fmt() is
used.
Assuming a failed device update means its state hasn't changed, update
frame format related settings stored in the device private structure
only after they are successfully applied so the stored values always
reflect hardware state as closely as possible.
Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
It is not clear what pixel format is actually configured in hardware on
reset. MEDIA_BUS_FMT_YUYV8_2X8, assumed on device probe since the
driver was intiially submitted, is for sure not the one.
Fix it by explicitly applying a known, driver default frame format just
after initial device reset.
Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Commit da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad
op get_fmt") converted a former ov6650_g_fmt() video operation callback
to an ov6650_get_fmt() pad operation callback. However, the converted
function disregards a format->which flag that pad operations should
obey and always returns active frame format settings.
That can be fixed by always responding to V4L2_SUBDEV_FORMAT_TRY with
-EINVAL, or providing the response from a pad config argument, likely
updated by a former user call to V4L2_SUBDEV_FORMAT_TRY .set_fmt().
Since implementation of the latter is trivial, go for it.
Fixes: da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt")
Signed-off-by: Janusz Krzysztofik <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|