| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, ECPF eswitch manager does one-time only configuration for
VF vports when device switches to offloads mode. However, when num of
VFs changed from host side, driver doesn't update VF vports
configurations.
Hence, perform VFs vport configuration update whenever num_vfs change
event occurs.
Signed-off-by: Bodong Wang <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Both legacy and offload modes require vport setup, only offload mode
requires rep setup. Before this patch, vport and rep operations are
separated applied to all relevant vports in different stages.
Change to use per vport configuration, so that vport and rep operations
are modularized per vport.
Signed-off-by: Bodong Wang <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Vport enable and disable sequence is incorrect. It should be:
enable()
esw_vport_setup_acl,
esw_vport_setup,
esw_vport_enable_qos.
disable()
esw_vport_disable_qos,
esw_vport_cleanup,
esw_vport_cleanup_acl.
Instead of having two setup functions for port and acl, merge
acl setup to port setup function.
Signed-off-by: Bodong Wang <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Rename esw_apply_vport_config() to esw_vport_setup(), and add new
helper function esw_vport_cleanup() to make them symmetric.
Signed-off-by: Bodong Wang <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
esw_vport_enable_qos can return error in cases below:
1. QoS is already enabled. Warnning is useless in this case.
2. Create scheduling element cmd failed. There is already a warning.
Remove the redundant warnning if esw_vport_enable_qos returns err.
Signed-off-by: Bodong Wang <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Consider scenario below, CPU 1 is at risk to query already destroyed
drop counters. Need to apply the same state mutex when disabling vport.
+-------------------------------+-------------------------------------+
| CPU 0 | CPU 1 |
+-------------------------------+-------------------------------------+
| mlx5_device_disable_sriov | mlx5e_get_vf_stats |
| mlx5_eswitch_disable | mlx5_eswitch_get_vport_stats |
| esw_disable_vport | mlx5_eswitch_query_vport_drop_stats |
| mlx5_fc_destroy(drop_counter) | mlx5_fc_query(drop_counter) |
+-------------------------------+-------------------------------------+
Fixes: b8a0dbe3a90b ("net/mlx5e: E-switch, Add steering drop counters")
Signed-off-by: Bodong Wang <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
esw_vport_create_legacy_acl_tables bails out immediately for eswitch
manager, hence remove all the check of esw manager cap after.
Signed-off-by: Bodong Wang <[email protected]>
Reviewed-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Andrii Nakryiko says:
====================
This patch set fixes bug in CO-RE relocation candidate finding logic, which
currently allows matching against forward declarations, functions, and other
named types, even though it makes no sense to even attempt. As part of
verifying the fix, add test using vmlinux.h with preserve_access_index
attribute and utilizing struct pt_regs heavily to trace nanosleep syscall
using 5 different types of tracing BPF programs.
This test also demonstrated problems using struct pt_regs in syscall
tracepoints and required a new set of macro, which were added in patch #3
into bpf_tracing.h.
Patch #1 fixes annoying issue with selftest failure messages being out of
sync.
v1->v2:
- drop unused handle__probed() function (Martin).
====================
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Add vmlinux.h generation to selftest/bpf's Makefile. Use it from newly added
test_vmlinux to trace nanosleep syscall using 5 different types of programs:
- tracepoint;
- raw tracepoint;
- raw tracepoint w/ direct memory reads (tp_btf);
- kprobe;
- fentry.
These programs are realistic variants of real-life tracing programs,
excercising vmlinux.h's usage with tracing applications.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Syscall raw tracepoints have struct pt_regs pointer as tracepoint's first
argument. After that, reading any of pt_regs fields requires bpf_probe_read(),
even for tp_btf programs. Due to that, PT_REGS_PARMx macros are not usable as
is. This patch adds CO-RE variants of those macros that use BPF_CORE_READ() to
read necessary fields. This provides relocatable architecture-agnostic pt_regs
field accesses.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
When finding target type candidates, ignore forward declarations, functions,
and other named types of incompatible kind. Not doing this can cause false
errors. See [0] for one such case (due to struct pt_regs forward
declaration).
[0] https://github.com/iovisor/bcc/pull/2806#issuecomment-598543645
Fixes: ddc7c3042614 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: Wenbo Zhang <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
printf() doesn't seem to honor using overwritten stdout/stderr (as part of
stdio hijacking), so ensure all "standard" invocations of printf() do
fprintf(stdout, ...) instead.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Andrii Nakryiko reports that sockmap_listen test suite is frequently
failing due to accept() calls erroring out with EAGAIN:
./test_progs:connect_accept_thread:733: accept: Resource temporarily unavailable
connect_accept_thread:FAIL:733
This is because we are using a non-blocking listening TCP socket to
accept() connections without polling on the socket.
While at first switching to blocking mode seems like the right thing to do,
this could lead to test process blocking indefinitely in face of a network
issue, like loopback interface being down, as Andrii pointed out.
Hence, stick to non-blocking mode for TCP listening sockets but with
polling for incoming connection for a limited time before giving up.
Apply this approach to all socket I/O calls in the test suite that we
expect to block indefinitely, that is accept() for TCP and recv() for UDP.
Fixes: 44d28be2b8d4 ("selftests/bpf: Tests for sockmap/sockhash holding listening sockets")
Reported-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Commit fe4eb069edb7 ("bpftool: Use linux/types.h from source tree for
profiler build") added a build dependency on tools/testing/selftests/bpf
to tools/bpf/bpftool. This is suboptimal with respect to a possible
stand-alone build of bpftool.
Fix this by moving tools/testing/selftests/bpf/include/uapi/linux/types.h
to tools/include/uapi/linux/types.h.
This requires an adjustment in the include search path order for the
tests in tools/testing/selftests/bpf so that tools/include/linux/types.h
is selected when building host binaries and
tools/include/uapi/linux/types.h is selected when building bpf binaries.
Verified by compiling bpftool and the bpf selftests on x86_64 with this
change.
Fixes: fe4eb069edb7 ("bpftool: Use linux/types.h from source tree for profiler build")
Suggested-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Tobias Klauser <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Sparse reports a warning at __bpf_prog_enter() and __bpf_prog_exit()
warning: context imbalance in __bpf_prog_enter() - wrong count at exit
warning: context imbalance in __bpf_prog_exit() - unexpected unlock
The root cause is the missing annotation at __bpf_prog_enter()
and __bpf_prog_exit()
Add the missing __acquires(RCU) annotation
Add the missing __releases(RCU) annotation
Signed-off-by: Jules Irenge <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
When compiling bpftool the following warning is found: "declaration of
'struct bpf_pidns_info' will not be visible outside of this function."
This patch adds struct bpf_pidns_info to type_fwds array to fix this.
Fixes: b4490c5c4e02 ("bpf: Added new helper bpf_get_ns_current_pid_tgid")
Signed-off-by: Carlos Neira <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
nanosleep syscall expects pointer to struct timespec, not nanoseconds
directly. Current implementation fulfills its purpose of invoking nanosleep
syscall, but doesn't really provide sleeping capabilities, which can cause
flakiness for tests relying on usleep() to wait for something.
Fixes: ec12a57b822c ("selftests/bpf: Guarantee that useep() calls nanosleep() syscall")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Jiri Olsa says:
====================
this patchset adds trampoline and dispatcher objects
to be visible in /proc/kallsyms.
$ sudo cat /proc/kallsyms | tail -20
...
ffffffffa050f000 t bpf_prog_5a2b06eab81b8f51 [bpf]
ffffffffa0511000 t bpf_prog_6deef7357e7b4530 [bpf]
ffffffffa0542000 t bpf_trampoline_13832 [bpf]
ffffffffa0548000 t bpf_prog_96f1b5bf4e4cc6dc_mutex_lock [bpf]
ffffffffa0572000 t bpf_prog_d1c63e29ad82c4ab_bpf_prog1 [bpf]
ffffffffa0585000 t bpf_prog_e314084d332a5338__dissect [bpf]
ffffffffa0587000 t bpf_prog_59785a79eac7e5d2_mutex_unlock [bpf]
ffffffffa0589000 t bpf_prog_d0db6e0cac050163_mutex_lock [bpf]
ffffffffa058d000 t bpf_prog_d8f047721e4d8321_bpf_prog2 [bpf]
ffffffffa05df000 t bpf_trampoline_25637 [bpf]
ffffffffa05e3000 t bpf_prog_d8f047721e4d8321_bpf_prog2 [bpf]
ffffffffa05e5000 t bpf_prog_3b185187f1855c4c [bpf]
ffffffffa05e7000 t bpf_prog_d8f047721e4d8321_bpf_prog2 [bpf]
ffffffffa05eb000 t bpf_prog_93cebb259dd5c4b2_do_sys_open [bpf]
ffffffffa0677000 t bpf_dispatcher_xdp [bpf]
v5 changes:
- keeping just 1 bpf_tree for all the objects and adding flag
to recognize bpf_objects when searching for exception tables [Alexei]
- no need for is_bpf_image_address call in kernel_text_address [Alexei]
- removed the bpf_image tree, because it's no longer needed
v4 changes:
- add trampoline and dispatcher to kallsyms once the it's allocated [Alexei]
- omit the symbols sorting for kallsyms [Alexei]
- small title change in one patch [Song]
- some function renames:
bpf_get_prog_name to bpf_prog_ksym_set_name
bpf_get_prog_addr_region to bpf_prog_ksym_set_addr
- added acks to changelogs
- I checked and there'll be conflict on perftool side with
upcoming changes from Adrian Hunter (text poke events),
so I think it's better if Arnaldo takes the perf changes
via perf tree and we will solve all conflicts there
v3 changes:
- use container_of directly in bpf_get_ksym_start [Daniel]
- add more changelog explanations for ksym addresses [Daniel]
v2 changes:
- omit extra condition in __bpf_ksym_add for sorting code (Andrii)
- rename bpf_kallsyms_tree_ops to bpf_ksym_tree (Andrii)
- expose only executable code in kallsyms (Andrii)
- use full trampoline key as its kallsyms id (Andrii)
- explained the BPF_TRAMP_REPLACE case (Andrii)
- small format changes in bpf_trampoline_link_prog/bpf_trampoline_unlink_prog (Andrii)
- propagate error value in bpf_dispatcher_update and update kallsym if it's successful (Andrii)
- get rid of __always_inline for bpf_ksym_tree callbacks (Andrii)
- added KSYMBOL notification for bpf_image add/removal
- added perf tools changes to properly display trampoline/dispatcher
====================
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Now that we have all the objects (bpf_prog, bpf_trampoline,
bpf_dispatcher) linked in bpf_tree, there's no need to have
separate bpf_image tree for images.
Reverting the bpf_image tree together with struct bpf_image,
because it's no longer needed.
Also removing bpf_image_alloc function and adding the original
bpf_jit_alloc_exec_page interface instead.
The kernel_text_address function can now rely only on is_bpf_text_address,
because it checks the bpf_tree that contains all the objects.
Keeping bpf_image_ksym_add and bpf_image_ksym_del because they are
useful wrappers with perf's ksymbol interface calls.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adding dispatchers to kallsyms. It's displayed as
bpf_dispatcher_<NAME>
where NAME is the name of dispatcher.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adding trampolines to kallsyms. It's displayed as
bpf_trampoline_<ID> [bpf]
where ID is the BTF id of the trampoline function.
Adding bpf_image_ksym_add/del functions that setup
the start/end values and call KSYMBOL perf events
handlers.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Separating /proc/kallsyms add/del code and adding bpf_ksym_add/del
functions for that.
Moving bpf_prog_ksym_node_add/del functions to __bpf_ksym_add/del
and changing their argument to 'struct bpf_ksym' object. This way
we can call them for other bpf objects types like trampoline and
dispatcher.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adding 'prog' bool flag to 'struct bpf_ksym' to mark that
this object belongs to bpf_prog object.
This change allows having bpf_prog objects together with
other types (trampolines and dispatchers) in the single
bpf_tree. It's used when searching for bpf_prog exception
tables by the bpf_prog_ksym_find function, where we need
to get the bpf_prog pointer.
>From now we can safely add bpf_ksym support for trampoline
or dispatcher objects, because we can differentiate them
from bpf_prog objects.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Instead of requiring users to do three steps for cleaning up bpf_link, its
anon_inode file, and unused fd, abstract that away into bpf_link_cleanup()
helper. bpf_link_defunct() is removed, as it shouldn't be needed as an
individual operation anymore.
v1->v2:
- keep bpf_link_cleanup() static for now (Daniel).
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adding bpf_ksym_find function that is used bpf bpf address
lookup functions:
__bpf_address_lookup
is_bpf_text_address
while keeping bpf_prog_kallsyms_find to be used only for lookup
of bpf_prog objects (will happen in following changes).
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Switch to non-blocking accept and wait for server thread to exit before
proceeding. I noticed that sometimes tcp_rtt server thread failure would
"spill over" into other tests (that would run after tcp_rtt), probably just
because server thread exits much later and tcp_rtt doesn't wait for it.
v1->v2:
- add usleep() while waiting on initial non-blocking accept() (Stanislav);
Fixes: 8a03222f508b ("selftests/bpf: test_progs: fix client/server race in tcp_rtt")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Reviewed-by: Stanislav Fomichev <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Moving ksym_tnode list node to 'struct bpf_ksym' object,
so the symbol itself can be chained and used in other
objects like bpf_trampoline and bpf_dispatcher.
We need bpf_ksym object to be linked both in bpf_kallsyms
via lnode for /proc/kallsyms and in bpf_tree via tnode for
bpf address lookup functions like __bpf_address_lookup or
bpf_prog_kallsyms_find.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Some implementations of C runtime library won't call nanosleep() syscall from
usleep(). But a bunch of kprobe/tracepoint selftests rely on nanosleep being
called to trigger them. To make this more reliable, "override" usleep
implementation and call nanosleep explicitly.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Cc: Julia Kartseva <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adding lnode list node to 'struct bpf_ksym' object,
so the struct bpf_ksym itself can be chained and used
in other objects like bpf_trampoline and bpf_dispatcher.
Changing iterator to bpf_ksym in bpf_get_kallsym function.
The ksym->start is holding the prog->bpf_func value,
so it's ok to use it as value in bpf_get_kallsym.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
In commit 4a3d6c6a6e4d ("libbpf: Reduce log level for custom section
names"), log level for messages for libbpf_attach_type_by_name() and
libbpf_prog_type_by_name() was downgraded from "info" to "debug". The
latter function, in particular, is used by bpftool when attempting to
load programs, and this change caused bpftool to exit with no hint or
error message when it fails to detect the type of the program to load
(unless "-d" option was provided).
To help users understand why bpftool fails to load the program, let's do
a second run of the function with log level in "debug" mode in case of
failure.
Before:
# bpftool prog load sample_ret0.o /sys/fs/bpf/sample_ret0
# echo $?
255
Or really verbose with -d flag:
# bpftool -d prog load sample_ret0.o /sys/fs/bpf/sample_ret0
libbpf: loading sample_ret0.o
libbpf: section(1) .strtab, size 134, link 0, flags 0, type=3
libbpf: skip section(1) .strtab
libbpf: section(2) .text, size 16, link 0, flags 6, type=1
libbpf: found program .text
libbpf: section(3) .debug_abbrev, size 55, link 0, flags 0, type=1
libbpf: skip section(3) .debug_abbrev
libbpf: section(4) .debug_info, size 75, link 0, flags 0, type=1
libbpf: skip section(4) .debug_info
libbpf: section(5) .rel.debug_info, size 32, link 14, flags 0, type=9
libbpf: skip relo .rel.debug_info(5) for section(4)
libbpf: section(6) .debug_str, size 150, link 0, flags 30, type=1
libbpf: skip section(6) .debug_str
libbpf: section(7) .BTF, size 155, link 0, flags 0, type=1
libbpf: section(8) .BTF.ext, size 80, link 0, flags 0, type=1
libbpf: section(9) .rel.BTF.ext, size 32, link 14, flags 0, type=9
libbpf: skip relo .rel.BTF.ext(9) for section(8)
libbpf: section(10) .debug_frame, size 40, link 0, flags 0, type=1
libbpf: skip section(10) .debug_frame
libbpf: section(11) .rel.debug_frame, size 16, link 14, flags 0, type=9
libbpf: skip relo .rel.debug_frame(11) for section(10)
libbpf: section(12) .debug_line, size 74, link 0, flags 0, type=1
libbpf: skip section(12) .debug_line
libbpf: section(13) .rel.debug_line, size 16, link 14, flags 0, type=9
libbpf: skip relo .rel.debug_line(13) for section(12)
libbpf: section(14) .symtab, size 96, link 1, flags 0, type=2
libbpf: looking for externs among 4 symbols...
libbpf: collected 0 externs total
libbpf: failed to guess program type from ELF section '.text'
libbpf: supported section(type) names are: socket sk_reuseport kprobe/ [...]
After:
# bpftool prog load sample_ret0.o /sys/fs/bpf/sample_ret0
libbpf: failed to guess program type from ELF section '.text'
libbpf: supported section(type) names are: socket sk_reuseport kprobe/ [...]
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adding name to 'struct bpf_ksym' object to carry the name
of the symbol for bpf_prog, bpf_trampoline, bpf_dispatcher
objects.
The current benefit is that name is now generated only when
the symbol is added to the list, so we don't need to generate
it every time it's accessed.
The future benefit is that we will have all the bpf objects
symbols represented by struct bpf_ksym.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adding 'struct bpf_ksym' object that will carry the
kallsym information for bpf symbol. Adding the start
and end address to begin with. It will be used by
bpf_prog, bpf_trampoline, bpf_dispatcher objects.
The symbol_start/symbol_end values were originally used
to sort bpf_prog objects. For the address displayed in
/proc/kallsyms we are using prog->bpf_func value.
I'm using the bpf_func value for program symbol start
instead of the symbol_start, because it makes no difference
for sorting bpf_prog objects and we can use it directly as
an address to display it in /proc/kallsyms.
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Adding bpf_trampoline_ name prefix for DECLARE_BPF_DISPATCHER,
so all the dispatchers have the common name prefix.
And also a small '_' cleanup for bpf_dispatcher_nopfunc function
name.
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The kbuild test robot reported compile issue on x86 in one of
the following patches that adds <linux/kallsyms.h> include into
<linux/bpf.h>, which is picked up by init_32.c object.
The problem is that <linux/kallsyms.h> defines global function
is_kernel_text which colides with the static function of the
same name defined in init_32.c:
$ make ARCH=i386
...
>> arch/x86/mm/init_32.c:241:19: error: redefinition of 'is_kernel_text'
static inline int is_kernel_text(unsigned long addr)
^~~~~~~~~~~~~~
In file included from include/linux/bpf.h:21:0,
from include/linux/bpf-cgroup.h:5,
from include/linux/cgroup-defs.h:22,
from include/linux/cgroup.h:28,
from include/linux/hugetlb.h:9,
from arch/x86/mm/init_32.c:18:
include/linux/kallsyms.h:31:19: note: previous definition of 'is_kernel_text' was here
static inline int is_kernel_text(unsigned long addr)
Renaming the init_32.c is_kernel_text function to __is_kernel_text.
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2020-03-13
An update from ieee802154 for *net-next*
Two small patches with updates targeting the whole tree.
Sergin does update SPI drivers to the new transfer delay handling
and Gustavo did one of his zero-length array replacement patches.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
There are a couple of spelling mistakes in NL_SET_ERR_MSG_ATTR messages.
Fix these.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Minor overlapping changes, nothing serious.
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull drm fixes from Dave Airlie:
"It's a bit quieter, probably not as much as it could be.
There is on large regression fix in here from Lyude for displayport
bandwidth calculations, there've been reports of multi-monitor in
docks not working since -rc1 and this has been tested to fix those.
Otherwise it's a bunch of i915 (with some GVT fixes), a set of amdgpu
watermark + bios fixes, and an exynos iommu cleanup fix.
core:
- DP MST bandwidth regression fix.
i915:
- hard lockup fix
- GVT fixes
- 32-bit alignment issue fix
- timeline wait fixes
- cacheline_retire and free
amdgpu:
- Update the display watermark bounding box for navi14
- Fix fetching vbios directly from rom on vega20/arcturus
- Navi and renoir watermark fixes
exynos:
- iommu object cleanup fix"
`
* tag 'drm-fixes-2020-03-13' of git://anongit.freedesktop.org/drm/drm:
drm/dp_mst: Rewrite and fix bandwidth limit checks
drm/dp_mst: Reprobe path resources in CSN handler
drm/dp_mst: Use full_pbn instead of available_pbn for bandwidth checks
drm/dp_mst: Rename drm_dp_mst_is_dp_mst_end_device() to be less redundant
drm/i915: Defer semaphore priority bumping to a workqueue
drm/i915/gt: Close race between cacheline_retire and free
drm/i915/execlists: Enable timeslice on partial virtual engine dequeue
drm/i915: be more solid in checking the alignment
drm/i915/gvt: Fix dma-buf display blur issue on CFL
drm/i915: Return early for await_start on same timeline
drm/i915: Actually emit the await_start
drm/amdgpu/powerplay: nv1x, renior copy dcn clock settings of watermark to smu during boot up
drm/exynos: Fix cleanup of IOMMU related objects
drm/amdgpu: correct ROM_INDEX/DATA offset for VEGA20
drm/amd/display: update soc bb for nv14
drm/i915/gvt: Fix emulated vbt size issue
drm/i915/gvt: Fix unnecessary schedule timer when no vGPU exits
|
|
Introduce new helper that reuses existing xdp perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct xdp_buff *' as a tracepoint argument.
Signed-off-by: Eelco Chaudron <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/bpf/158348514556.2239.11050972434793741444.stgit@xdp-tutorial
|
|
Carlos Neira says:
====================
Currently bpf_get_current_pid_tgid(), is used to do pid filtering in bcc's
scripts but this helper returns the pid as seen by the root namespace which is
fine when a bcc script is not executed inside a container.
When the process of interest is inside a container, pid filtering will not work
if bpf_get_current_pid_tgid() is used.
This helper addresses this limitation returning the pid as it's seen by the current
namespace where the script is executing.
In the future different pid_ns files may belong to different devices, according to the
discussion between Eric Biederman and Yonghong in 2017 Linux plumbers conference.
To address that situation the helper requires inum and dev_t from /proc/self/ns/pid.
This helper has the same use cases as bpf_get_current_pid_tgid() as it can be
used to do pid filtering even inside a container.
====================
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
bpf_get_ns_current_pid_tgid.
Self tests added for new helper bpf_get_ns_current_pid_tgid
Signed-off-by: Carlos Neira <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
UAPI Changes: None
Cross-subsystem Changes: None
Core Changes: Fixed regressions introduced by commit cd82d82cbc04
("drm/dp_mst: Add branch bandwidth validation to MST atomic check"),
which would cause us to:
* Calculate the available bandwidth on an MST topology incorrectly, and
as a result reject most display configurations that would try to enable
more then one sink on a topology
* Occasionally expose MST connectors to userspace before finishing
probing their PBN capabilities, resulting in us rejecting display
configurations because we assumed briefly that no bandwidth was
available
Driver Changes: None
Signed-off-by: Dave Airlie <[email protected]>
From: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
New bpf helper bpf_get_ns_current_pid_tgid,
This helper will return pid and tgid from current task
which namespace matches dev_t and inode number provided,
this will allows us to instrument a process inside a container.
Signed-off-by: Carlos Neira <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
ns_match returns true if the namespace inode and dev_t matches the ones
provided by the caller.
Signed-off-by: Carlos Neira <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.6-rc6:
- hard lockup fix
- GVT fixes
- 32-bit alignment issue fix
- timeline wait fixes
- cacheline_retire and free
Signed-off-by: Dave Airlie <[email protected]>
From: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Minor fixes for bash completion: addition of program name completion for
two subcommands, and correction for program test-runs and map pinning.
The completion for the following commands is fixed or improved:
# bpftool prog run [TAB]
# bpftool prog pin [TAB]
# bpftool map pin [TAB]
# bpftool net attach xdp name [TAB]
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Documentation and interactive help for bpftool have always explained
that the regular handles for programs (id|name|tag|pinned) and maps
(id|name|pinned) can be passed to the utility when attempting to pin
objects (bpftool prog pin PROG / bpftool map pin MAP).
THIS IS A LIE!! The tool actually accepts only ids, as the parsing is
done in do_pin_any() in common.c instead of reusing the parsing
functions that have long been generic for program and map handles.
Instead of fixing the doc, fix the code. It is trivial to reuse the
generic parsing, and to simplify do_pin_any() in the process.
Do not accept to pin multiple objects at the same time with
prog_parse_fds() or map_parse_fds() (this would require a more complex
syntax for passing multiple sysfs paths and validating that they
correspond to the number of e.g. programs we find for a given name or
tag).
Signed-off-by: Quentin Monnet <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.6-2020-03-11:
amdgpu:
- Update the display watermark bounding box for navi14
- Fix fetching vbios directly from rom on vega20/arcturus
- Navi and renoir watermark fixes
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Pull networking fixes from David Miller:
"It looks like a decent sized set of fixes, but a lot of these are one
liner off-by-one and similar type changes:
1) Fix netlink header pointer to calcular bad attribute offset
reported to user. From Pablo Neira Ayuso.
2) Don't double clear PHY interrupts when ->did_interrupt is set,
from Heiner Kallweit.
3) Add missing validation of various (devlink, nl802154, fib, etc.)
attributes, from Jakub Kicinski.
4) Missing *pos increments in various netfilter seq_next ops, from
Vasily Averin.
5) Missing break in of_mdiobus_register() loop, from Dajun Jin.
6) Don't double bump tx_dropped in veth driver, from Jiang Lidong.
7) Work around FMAN erratum A050385, from Madalin Bucur.
8) Make sure ARP header is pulled early enough in bonding driver,
from Eric Dumazet.
9) Do a cond_resched() during multicast processing of ipvlan and
macvlan, from Mahesh Bandewar.
10) Don't attach cgroups to unrelated sockets when in interrupt
context, from Shakeel Butt.
11) Fix tpacket ring state management when encountering unknown GSO
types. From Willem de Bruijn.
12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend()
only in the suspend context. From Heiner Kallweit"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
net: systemport: fix index check to avoid an array out of bounds access
tc-testing: add ETS scheduler to tdc build configuration
net: phy: fix MDIO bus PM PHY resuming
net: hns3: clear port base VLAN when unload PF
net: hns3: fix RMW issue for VLAN filter switch
net: hns3: fix VF VLAN table entries inconsistent issue
net: hns3: fix "tc qdisc del" failed issue
taprio: Fix sending packets without dequeueing them
net: mvmdio: avoid error message for optional IRQ
net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
net: memcg: fix lockdep splat in inet_csk_accept()
s390/qeth: implement smarter resizing of the RX buffer pool
s390/qeth: refactor buffer pool code
s390/qeth: use page pointers to manage RX buffer pool
seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
net/packet: tpacket_rcv: do not increment ring index on drop
sxgbe: Fix off by one in samsung driver strncpy size arg
net: caif: Add lockdep expression to RCU traversal primitive
MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
...
|
|
Needs for application BTF being present differs between user-space libbpf needs and kernel
needs. Currently, BTF is mandatory only in kernel only when BPF application is
using STRUCT_OPS. While libbpf itself relies more heavily on presense of BTF:
- for BTF-defined maps;
- for Kconfig externs;
- for STRUCT_OPS as well.
Thus, checks for presence and validness of bpf_object's BPF needs to be
performed separately, which is patch does.
Fixes: 5327644614a1 ("libbpf: Relax check whether BTF is mandatory")
Reported-by: Michal Rostecki <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Cc: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|