aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-02-18Expand CONFIG_DEBUG_LIST to several other list operationsLinus Torvalds2-16/+35
When list debugging is enabled, we aim to readably show list corruption errors, and the basic list_add/list_del operations end up having extra debugging code in them to do some basic validation of the list entries. However, "list_del_init()" and "list_move[_tail]()" ended up avoiding the debug code due to how they were written. This fixes that. So the _next_ time we have list_move() problems with stale list entries, we'll hopefully have an easier time finding them.. Signed-off-by: Linus Torvalds <[email protected]>
2011-02-18Input: tegra-kbc - add function keymapRakesh Iyer2-3/+60
Add Fn keymap support to allow for internal processing of Fn keys. Signed-off-by: Rakesh Iyer <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2011-02-18MAINTAINERS: Remove stale hwmon quilt treeGuenter Roeck1-1/+0
ftp://pub.kernel.org/pub/linux/kernel/people/groeck/linux-staging/ is not kept up to date, so remove reference to it. Signed-off-by: Guenter Roeck <[email protected]>
2011-02-18hwmon: (k10temp) add support for AMD Family 12h/14h CPUsClemens Ladisch3-6/+13
Add the PCI ID to support the internal temperature sensor of the AMD "Llano" and "Brazos" processor families. Signed-off-by: Clemens Ladisch <[email protected]> Cc: [email protected] # ca86828: x86, AMD, PCI: Add AMD northbridge PCI device Cc: [email protected] Signed-off-by: Guenter Roeck <[email protected]>
2011-02-18ARM: S5PV210: Fix regulator namesMarek Szyprowski2-6/+6
Since commit 1130e5b3ff4 regulators are exported to debugfs. The names of the regulators that contains slash ('/') causes an ops during kernel boot. This patch fixes this issue. Signed-off-by: Marek Szyprowski <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2011-02-18ARM: S5PV210: Update max8998_platform_dataMarek Szyprowski2-6/+12
Max8998 PMIC driver's platform data has been changed once again in commit 735a3d9efdc. This patch fixes build break caused by that commit. Signed-off-by: Marek Szyprowski <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2011-02-18ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdataAxel Lin1-1/+0
s3c24xx_ts_set_platdata is annotated __init and not used by any module, thus don't export it. This patch fixes below warning: WARNING: arch/arm/plat-samsung/built-in.o(__ksymtab+0x90): Section mismatch in reference from the variable __ksymtab_s3c24xx_ts_set_platdata to the function .init.text:s3c24xx_ts_set_platdata() The symbol s3c24xx_ts_set_platdata is exported and annotated __init Fix this by removing the __init annotation of s3c24xx_ts_set_platdata or drop the export. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2011-02-17eCryptfs: Revert "dont call lookup_one_len to avoid NULL nameidata"Tyler Hicks1-94/+12
This reverts commit 21edad32205e97dc7ccb81a85234c77e760364c8 and commit 93c3fe40c279f002906ad14584c30671097d4394, which fixed a regression by the former. Al Viro pointed out bypassed dcache lookups in ecryptfs_new_lower_dentry(), misuse of vfs_path_lookup() in ecryptfs_lookup_one_lower() and a dislike of passing nameidata to the lower filesystem. Reported-by: Al Viro <[email protected]> Signed-off-by: Tyler Hicks <[email protected]>
2011-02-17Merge branch 'pm-fixes' of ↵Linus Torvalds1-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Return error code when alloc_image_page() fails
2011-02-17Merge branch 'drm-fixes' of ↵Linus Torvalds8-37/+45
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add missing frac fb div flag for dce4+ drm/radeon/kms: do not reject X16 and Y16X16 floating-point formats on r300 drm/nouveau: fix suspend/resume on GPUs that don't have PM support drm/nouveau: flips/flipd need to always set 'evict' for move_accel_cleanup() drm/nv40: fix tiling-related setup for a number of chipsets drm/nouveau: fix non-EDIDful native mode selection drm/nouveau: Fix detection of DDC-based LVDS on DCB15 boards. drm/nv04-nv40: Fix NULL dereference when we fail to find an LVDS native mode. drm/nv10: Fix crash when allocating a BO larger than half the available VRAM.
2011-02-17Merge branch 'for-linus' of ↵Linus Torvalds2-13/+24
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Prevent double completions after a timeout or RNR error IB/qib: Fix double add_timer() RDMA/nes: Don't generate async events for unregistered devices
2011-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds6-10/+10
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix NMI startup bug which also breaks perf. sparc: fix size argument to find_next_zero_bit() sparc: use bitmap_set() sparc32: unaligned memory access (MNA) trap handler bug
2011-02-17fs/partitions: Validate map_count in Mac partition tablesTimo Warns1-8/+9
Validate number of blocks in map and remove redundant variable. Signed-off-by: Timo Warns <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2011-02-17RTC: Re-enable UIE timer/polling emulationJohn Stultz3-2/+19
This patch re-enables UIE timer/polling emulation for rtc devices that do not support alarm irqs. CC: Uwe Kleine-König <[email protected]> CC: Thomas Gleixner <[email protected]> Reported-by: Uwe Kleine-König <[email protected]> Tested-by: Uwe Kleine-König <[email protected]> Signed-off-by: John Stultz <[email protected]>
2011-02-17RTC: Revert UIE emulation removalJohn Stultz3-0/+130
Uwe pointed out that my alarm based UIE emulation is not sufficient to replace the older timer/polling based UIE emulation on devices where there is no alarm irq. This causes rtc devices without alarms to return -EINVAL to UIE ioctls. The fix is to re-instate the old timer/polling method for devices without alarm irqs. This patch reverts the following commits: 042620a018afcfba1d678062b62e46 - Remove UIE emulation 1daeddd5962acad1bea55e524fc0fa - Cleanup removed UIE emulation declaration b5cc8ca1c9c3a37eaddf709b2fd3e1 - Remove Kconfig symbol for UIE emulation The emulation mode will still need to be wired-in with a following patch before it will work. CC: Uwe Kleine-König <[email protected]> CC: Thomas Gleixner <[email protected]> Reported-by: Uwe Kleine-König <[email protected]> Signed-off-by: John Stultz <[email protected]>
2011-02-17RTC: Release mutex in error path of rtc_alarm_irq_enableUwe Kleine-König1-3/+2
On hardware that doesn't support alarm interrupts, rtc_alarm_irq_enable could return without releasing the ops_lock mutex. This was introduced in aa0be0f (RTC: Propagate error handling via rtc_timer_enqueue properly) This patch corrects the issue by only returning once the mutex is released. [john.stultz: Reworded the commit log] Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: John Stultz <[email protected]>
2011-02-17Revert "USB: Reset USB 3.0 devices on (re)discovery"Greg Kroah-Hartman1-7/+11
This reverts commit 637d11bfb814637ec7b81e878db3ffea6408a89a. Sarah wants to tweak it some more before it's applied to the tree. Cc: Luben Tuikov <[email protected]> Cc: Sarah Sharp <[email protected]> Cc: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2011-02-17tg3: Restrict phy ioctl accessMatt Carlson1-2/+6
If management firmware is present and the device is down, the firmware will assume control of the phy. If a phy access were allowed from the host, it will collide with firmware phy accesses, resulting in unpredictable behavior. This patch fixes the problem by disallowing phy accesses during the problematic condition. Signed-off-by: Matt Carlson <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-02-17drivers/net: Call netif_carrier_off at the end of the probeIvan Vecera2-0/+4
Without calling of netif_carrier_off at the end of the probe the operstate is unknown when the device is initially opened. By default the carrier is on so when the device is opened and netif_carrier_on is called the link watch event is not fired and operstate remains zero (unknown). This patch fixes this behavior in forcedeth and r8169. Signed-off-by: Ivan Vecera <[email protected]> Acked-by: Francois Romieu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-02-17Merge branch 'for-greg' of git://gitorious.org/usb/usb into usb-linusGreg Kroah-Hartman1-8/+9
* 'for-greg' of git://gitorious.org/usb/usb: usb: musb: omap2430: fix kernel panic on reboot usb: musb: fix build breakage
2011-02-17Merge branches 'nes' and 'qib' into for-nextRoland Dreier1-1/+4
2011-02-17IB/qib: Prevent double completions after a timeout or RNR errorMike Marciniszyn1-1/+2
There is a double completion associated with error handling for RC QPs. The sequence is: - The do_rc_ack() routine fields an RNR nack and there are 0 rnr_retries configured on the QP. - qib_error_qp() stops the pending timer - qib_rc_send_complete() is called from sdma_complete() - qib_rc_send_complete() starts the timer because the msb of the psn just completed says an ack is needed. - a bunch of flushes occur as ipoib posts WQEs to an error'ed QP - rc_timeout() calls qib_restart_rc() - qib_restart_rc() calls qib_send_complete() with a IB_WC_RETRY_EXC_ERR on a wqe that has already been completed in the past The fix avoids starting the timer since another packet will never arrive. Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2011-02-17USB: musb: omap2430: fix kernel panic on rebootJohan Hovold1-0/+1
Cancel idle timer in musb_platform_exit. The idle timer could trigger after clock had been disabled leading to kernel panic when MUSB_DEVCTL is accessed in musb_do_idle on 2.6.37. The fault below is no longer triggered on 2.6.38-rc4 (clock is disabled later, and only if compiled as a module, and the offending memory access has moved) but the timer should be cancelled nonetheless. Rebooting... musb_hdrc musb_hdrc: remove, state 4 usb usb1: USB disconnect, address 1 musb_hdrc musb_hdrc: USB bus 1 deregistered Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 Internal error: : 1028 [#1] PREEMPT last sysfs file: /sys/kernel/uevent_seqnum Modules linked in: CPU: 0 Not tainted (2.6.37+ #6) PC is at musb_do_idle+0x24/0x138 LR is at musb_do_idle+0x18/0x138 pc : [<c02377d8>] lr : [<c02377cc>] psr: 80000193 sp : cf2bdd80 ip : cf2bdd80 fp : c048a20c r10: c048a60c r9 : c048a40c r8 : cf85e110 r7 : cf2bc000 r6 : 40000113 r5 : c0489800 r4 : cf85e110 r3 : 00000004 r2 : 00000006 r1 : fa0ab000 r0 : cf8a7000 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8faac019 DAC: 00000015 Process reboot (pid: 769, stack limit = 0xcf2bc2f0) Stack: (0xcf2bdd80 to 0xcf2be000) dd80: 00000103 c0489800 c02377b4 c005fa34 00000555 c0071a8c c04a3858 cf2bdda8 dda0: 00000555 c048a00c cf2bdda8 cf2bdda8 1838beb0 00000103 00000004 cf2bc000 ddc0: 00000001 00000001 c04896c8 0000000a 00000000 c005ac14 00000001 c003f32c dde0: 00000000 00000025 00000000 cf2bc000 00000002 00000001 cf2bc000 00000000 de00: 00000001 c005ad08 cf2bc000 c002e07c c03ec039 ffffffff fa200000 c0033608 de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff c0033c04 00000000 01234567 fee1dead 00000000 c006627c de80: 00000001 c00662c8 28121969 c00663ec cfa38c40 cf9f6a00 cf2bded0 cf9f6a0c dea0: 00000000 cf92f000 00008914 c02cd284 c04a55c8 c028b398 c00715c0 becf24a8 dec0: 30687465 00000000 00000000 00000000 00000002 1301a8c0 00000000 00000000 dee0: 00000002 1301a8c0 00000000 00000000 c0450494 cf527920 00011f10 cf2bdf08 df00: 00011f10 cf2bdf10 00011f10 cf2bdf18 c00f0b44 c004f7e8 cf2bdf18 cf2bdf18 df20: 00011f10 cf2bdf30 00011f10 cf2bdf38 cf401300 cf486100 00000008 c00d2b28 df40: 00011f10 cf401300 00200200 c00d3388 00011f10 cfb63a88 cfb63a80 c00c2f08 df60: 00000000 00000000 cfb63a80 00000000 cf0a3480 00000006 c0033c04 cfb63a80 df80: 00000000 c00c0104 00000003 cf0a3480 cfb63a80 00000000 00000001 00000004 dfa0: 00000058 c0033a80 00000000 00000001 fee1dead 28121969 01234567 00000000 dfc0: 00000000 00000001 00000004 00000058 00000001 00000001 00000000 00000001 dfe0: 4024d200 becf2cb0 00009210 4024d218 60000010 fee1dead 00000000 00000000 [<c02377d8>] (musb_do_idle+0x24/0x138) from [<c005fa34>] (run_timer_softirq+0x1a8/0x26) [<c005fa34>] (run_timer_softirq+0x1a8/0x26c) from [<c005ac14>] (__do_softirq+0x88/0x13) [<c005ac14>] (__do_softirq+0x88/0x138) from [<c005ad08>] (irq_exit+0x44/0x98) [<c005ad08>] (irq_exit+0x44/0x98) from [<c002e07c>] (asm_do_IRQ+0x7c/0xa0) [<c002e07c>] (asm_do_IRQ+0x7c/0xa0) from [<c0033608>] (__irq_svc+0x48/0xa8) Exception stack(0xcf2bde20 to 0xcf2bde68) de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff [<c0033608>] (__irq_svc+0x48/0xa8) from [<c004f7d8>] (sub_preempt_count+0x0/0xb8) Code: ebf86030 e5940098 e594108c e5902010 (e5d13060) ---[ end trace 3689c0d808f9bf7c ]--- Kernel panic - not syncing: Fatal exception in interrupt Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2011-02-17sierra: add new ID for Airprime/Sierra USB IP modemJon Thomas1-0/+3
I picked up a new Sierra usb 308 (At&t Shockwave) on 2/2011 and the vendor code is 0x0f3d Looking up vendor and product id's I see: 0f3d Airprime, Incorporated 0112 CDMA 1xEVDO PC Card, PC 5220 Sierra and Airprime are somehow related and I'm guessing the At&t usb 308 might be have some common hardware with the AirPrime SL809x. Signed-off-by: Jon Thomas <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2011-02-17USB: serial/usb_wwan, fix tty NULL dereferenceJiri Slaby1-6/+9
tty_port_tty_get may return without any problems NULL. Handle this case and do not oops in usb_wwan_indat_callback by dereferencing it. The oops: Unable to handle kernel paging request for data at address 0x000000d8 Faulting instruction address: 0xc0175b3c Oops: Kernel access of bad area, sig: 11 [#1] PowerPC 40x Platform last sysfs file: /sys/devices/pci0000:00/0000:00:00.0/0000:01:00.0/0000:02:09.2/usb1/idVendor Modules linked in: NIP: c0175b3c LR: c0175e7c CTR: c0215c90 REGS: c77f7d50 TRAP: 0300 Not tainted (2.6.37-rc5) MSR: 00021030 <ME,CE,IR,DR> CR: 88482028 XER: 2000005f DEAR: 000000d8, ESR: 00000000 TASK = c7141b90[1149] 'wvdial' THREAD: c2750000 GPR00: 00021030 c77f7e00 c7141b90 00000000 0000000e 00000000 0000000e c0410680 GPR08: c683db00 00000000 00000001 c03c81f8 88482028 10073ef4 ffffffb9 ffffff94 GPR16: 00000000 fde036c0 00200200 00100100 00000001 ffffff8d c34fabcc 00000000 GPR24: c71120d4 00000000 00000000 0000000e 00021030 00000000 00000000 0000000e NIP [c0175b3c] tty_buffer_request_room+0x2c/0x194 LR [c0175e7c] tty_insert_flip_string_fixed_flag+0x3c/0xb0 Call Trace: [c77f7e00] [00000003] 0x3 (unreliable) [c77f7e30] [c0175e7c] tty_insert_flip_string_fixed_flag+0x3c/0xb0 [c77f7e60] [c0215df4] usb_wwan_indat_callback+0x164/0x170 ... References: https://bugzilla.kernel.org/show_bug.cgi?id=24582 Cc: Amit Shah <[email protected]> Cc: baoyb <[email protected]> Signed-off-by: Jiri Slaby <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2011-02-17USB: Reset USB 3.0 devices on (re)discoveryLuben Tuikov1-11/+7
If the device isn't reset, the XHCI HCD sends SET ADDRESS to address 0 while the device is already in Addressed state, and the request is dropped on the floor as it is addressed to the default address. This sequence of events, which this patch fixes looks like this: usb_reset_and_verify_device() hub_port_init() hub_set_address() SET_ADDRESS to 0 with 1 usb_get_device_descriptor(udev, 8) usb_get_device_descriptor(udev, 18) descriptors_changed() --> goto re_enumerate: hub_port_logical_disconnect() kick_khubd() And then: hub_events() hub_port_connect_change() usb_disconnect() usb_disable_device() new device struct sets device state to Powered choose_address() hub_port_init() <-- no reset, but SET ADDRESS to 0 with 1, timeout! The solution is to always reset the device in hub_port_init() to put it in a known state. Signed-off-by: Luben Tuikov <[email protected]> Cc: Sarah Sharp <[email protected]> Cc: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2011-02-17USB: Add quirk for Samsung Android phone modemMaciej Szmigiero1-0/+4
My Galaxy Spica needs this quirk when in modem mode, otherwise it causes endless USB bus resets and is unusable in this mode. Unfortunately Samsung decided to reuse ID of its old CDMA phone SGH-I500 for the modem part. That's why in addition to this patch the visor driver must be prevented from binding to SPH-I500 ID, so ACM driver can do that. Signed-off-by: Maciej Szmigiero <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2011-02-17USB: Add Samsung SGH-I500/Android modem ID switch to visor driverMaciej Szmigiero1-0/+12
[USB]Add Samsung SGH-I500/Android modem ID switch to visor driver Samsung decided to reuse USB ID of its old CDMA phone SGH-I500 for the modem part of some of their Android phones. At least Galaxy Spica is affected. This modem needs ACM driver and does not work with visor driver which binds the conflicting ID for SGH-I500. Because SGH-I500 is pretty an old hardware its best to add switch to visor driver in cause somebody still wants to use that phone with Linux. Note that this is needed only when using the Android phone as modem, not in USB storage or ADB mode. Signed-off-by: Maciej Szmigiero <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2011-02-17USB: add quirks entry for Keytouch QWERTY PanelAlan Stern1-0/+4
This patch (as1448) adds a quirks entry for the Keytouch QWERTY Panel firmware, used in the IEC 60945 keyboard. This device crashes during enumeration when the computer asks for its configuration string descriptor. Signed-off-by: Alan Stern <[email protected]> Tested-by: kholis <[email protected]> CC: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2011-02-17netfilter: ip6t_LOG: fix a flaw in printing the MACJoerg Marx1-1/+1
The flaw was in skipping the second byte in MAC header due to increasing the pointer AND indexed access starting at '1'. Signed-off-by: Joerg Marx <[email protected]> Signed-off-by: Patrick McHardy <[email protected]>
2011-02-17usb: musb: omap2430: fix kernel panic on rebootJohan Hovold1-0/+1
Cancel idle timer in musb_platform_exit. The idle timer could trigger after clock had been disabled leading to kernel panic when MUSB_DEVCTL is accessed in musb_do_idle on 2.6.37. The fault below is no longer triggered on 2.6.38-rc4 (clock is disabled later, and only if compiled as a module, and the offending memory access has moved) but the timer should be cancelled nonetheless. Rebooting... musb_hdrc musb_hdrc: remove, state 4 usb usb1: USB disconnect, address 1 musb_hdrc musb_hdrc: USB bus 1 deregistered Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0ab060 Internal error: : 1028 [#1] PREEMPT last sysfs file: /sys/kernel/uevent_seqnum Modules linked in: CPU: 0 Not tainted (2.6.37+ #6) PC is at musb_do_idle+0x24/0x138 LR is at musb_do_idle+0x18/0x138 pc : [<c02377d8>] lr : [<c02377cc>] psr: 80000193 sp : cf2bdd80 ip : cf2bdd80 fp : c048a20c r10: c048a60c r9 : c048a40c r8 : cf85e110 r7 : cf2bc000 r6 : 40000113 r5 : c0489800 r4 : cf85e110 r3 : 00000004 r2 : 00000006 r1 : fa0ab000 r0 : cf8a7000 Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 8faac019 DAC: 00000015 Process reboot (pid: 769, stack limit = 0xcf2bc2f0) Stack: (0xcf2bdd80 to 0xcf2be000) dd80: 00000103 c0489800 c02377b4 c005fa34 00000555 c0071a8c c04a3858 cf2bdda8 dda0: 00000555 c048a00c cf2bdda8 cf2bdda8 1838beb0 00000103 00000004 cf2bc000 ddc0: 00000001 00000001 c04896c8 0000000a 00000000 c005ac14 00000001 c003f32c dde0: 00000000 00000025 00000000 cf2bc000 00000002 00000001 cf2bc000 00000000 de00: 00000001 c005ad08 cf2bc000 c002e07c c03ec039 ffffffff fa200000 c0033608 de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff c0033c04 00000000 01234567 fee1dead 00000000 c006627c de80: 00000001 c00662c8 28121969 c00663ec cfa38c40 cf9f6a00 cf2bded0 cf9f6a0c dea0: 00000000 cf92f000 00008914 c02cd284 c04a55c8 c028b398 c00715c0 becf24a8 dec0: 30687465 00000000 00000000 00000000 00000002 1301a8c0 00000000 00000000 dee0: 00000002 1301a8c0 00000000 00000000 c0450494 cf527920 00011f10 cf2bdf08 df00: 00011f10 cf2bdf10 00011f10 cf2bdf18 c00f0b44 c004f7e8 cf2bdf18 cf2bdf18 df20: 00011f10 cf2bdf30 00011f10 cf2bdf38 cf401300 cf486100 00000008 c00d2b28 df40: 00011f10 cf401300 00200200 c00d3388 00011f10 cfb63a88 cfb63a80 c00c2f08 df60: 00000000 00000000 cfb63a80 00000000 cf0a3480 00000006 c0033c04 cfb63a80 df80: 00000000 c00c0104 00000003 cf0a3480 cfb63a80 00000000 00000001 00000004 dfa0: 00000058 c0033a80 00000000 00000001 fee1dead 28121969 01234567 00000000 dfc0: 00000000 00000001 00000004 00000058 00000001 00000001 00000000 00000001 dfe0: 4024d200 becf2cb0 00009210 4024d218 60000010 fee1dead 00000000 00000000 [<c02377d8>] (musb_do_idle+0x24/0x138) from [<c005fa34>] (run_timer_softirq+0x1a8/0x26) [<c005fa34>] (run_timer_softirq+0x1a8/0x26c) from [<c005ac14>] (__do_softirq+0x88/0x13) [<c005ac14>] (__do_softirq+0x88/0x138) from [<c005ad08>] (irq_exit+0x44/0x98) [<c005ad08>] (irq_exit+0x44/0x98) from [<c002e07c>] (asm_do_IRQ+0x7c/0xa0) [<c002e07c>] (asm_do_IRQ+0x7c/0xa0) from [<c0033608>] (__irq_svc+0x48/0xa8) Exception stack(0xcf2bde20 to 0xcf2bde68) de20: 00000001 00000000 cf852c14 cf81f200 c045b714 c045b708 cf2bc000 c04a37e8 de40: c0033c04 cf2bc000 00000000 00000001 cf2bde68 cf2bde68 c01c3abc c004f7d8 de60: 60000013 ffffffff [<c0033608>] (__irq_svc+0x48/0xa8) from [<c004f7d8>] (sub_preempt_count+0x0/0xb8) Code: ebf86030 e5940098 e594108c e5902010 (e5d13060) ---[ end trace 3689c0d808f9bf7c ]--- Kernel panic - not syncing: Fatal exception in interrupt Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2011-02-17usb: musb: fix build breakageFelipe Balbi1-8/+9
commit 0662481855c389b75a0a54c32870cc90563d80a9 (usb: musb: disable double buffering when it's broken), introduced a compile error when gadget API is disabled. Fix it. Signed-off-by: Felipe Balbi <[email protected]>
2011-02-17[S390] net: provide architecture specific NET_SKB_PADHorst Hartmann1-0/+1
NET_SKB_PAD has been increased from 32 to 64 and later to max(32, L1_CACHE_BYTES). This led to a 25% throughput decrease for streaming workloads accompanied by a 37% CPU cost increase on s390. Define a architecture specific NET_SKB_PAD with the old value of 32. Signed-off-by: Horst Hartmann <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-02-17[S390] atomic: use inline asmHeiko Carstens1-4/+18
Use inline assemblies for atomic_read/set(). This way there shouldn't be any questions or subtle volatile semantics left. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-02-17[S390] correct ipl parameter block safe guardMartin Schwidefsky1-2/+3
The 'output' variable is passed from decompress_kernel to check_ipl_parmblock before it is initialized. That disables the safe guard against the overwrite of the ipl parameter block. Fix this by passing the correct value to check_ipl_parmblock. Reported-by: David Binderman <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-02-17[S390] atomic: use ACCESS_ONCE() for atomic_read()Heiko Carstens1-6/+2
Let's make atomic_read() and atomic_set() behave like on all/most other architectures. Generated code is identical with gcc 4.5.2. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-02-17[S390] dasd: correct device tableStefan Haberland1-1/+1
The 3880 storage control unit supports a 3380 device type, but not a 3390 device type. Reported-by: Stephen Powell <[email protected]> Signed-off-by: Stefan Haberland <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-02-17netfilter: tproxy: do not assign timewait sockets to skb->skFlorian Westphal4-30/+44
Assigning a socket in timewait state to skb->sk can trigger kernel oops, e.g. in nfnetlink_log, which does: if (skb->sk) { read_lock_bh(&skb->sk->sk_callback_lock); if (skb->sk->sk_socket && skb->sk->sk_socket->file) ... in the timewait case, accessing sk->sk_callback_lock and sk->sk_socket is invalid. Either all of these spots will need to add a test for sk->sk_state != TCP_TIME_WAIT, or xt_TPROXY must not assign a timewait socket to skb->sk. This does the latter. If a TW socket is found, assign the tproxy nfmark, but skip the skb->sk assignment, thus mimicking behaviour of a '-m socket .. -j MARK/ACCEPT' re-routing rule. The 'SYN to TW socket' case is left unchanged -- we try to redirect to the listener socket. Cc: Balazs Scheidler <[email protected]> Cc: KOVACS Krisztian <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Patrick McHardy <[email protected]>
2011-02-17xen: suspend and resume system devices when running PVHVMIan Campbell1-0/+10
Otherwise we fail to properly suspend/resume all of the emulated devices. Something between 2.6.38-rc2 and rc3 appears to have exposed this issue, but it's always been wrong not to do this. Signed-off-by: Ian Campbell <[email protected]> Acked-by: Stefano Stabellini <[email protected]> Acked-by: Jeremy Fitzhardinge <[email protected]>
2011-02-17ixgbe: work around for DDP last buffer sizeAmir Hanania2-1/+52
A HW limitation was recently discovered where the last buffer in a DDP offload cannot be a full buffer size in length. Fix the issue with a work around by adding another buffer with size = 1. Signed-off-by: Amir Hanania <[email protected]> Tested-by: Ross Brattain <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2011-02-17ixgbe: fix panic due to uninitialised pointerAndy Gospodarek1-2/+4
Systems containing an 82599EB and running a backported driver from upstream were panicing on boot. It turns out hw->mac.ops.setup_sfp is only set for 82599, so one should check to be sure that pointer is set before continuing in ixgbe_sfp_config_module_task. I verified by inspection that the upstream driver has the same issue and also added a check before the call in ixgbe_sfp_link_config. Signed-off-by: Andy Gospodarek <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2011-02-17e1000e: flush all writebacks before unloadJesse Brandeburg1-10/+21
The driver was not flushing all writebacks before unloading, possibly causing memory to be written by the hardware after the driver had reinitialized the rings. This adds missing functionality to flush any pending writebacks and is called in all spots where descriptors should be completed before the driver begins processing. Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Bruce Allan <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2011-02-17e1000e: check down flag in tasksJesse Brandeburg1-0/+21
This change is part of a fix to avoid any tasks running while the driver is exiting and deinitializing resources. Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2011-02-16Merge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-4/+4
* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux: nfsd: correctly handle return value from nfsd_map_name_to_*
2011-02-17cifs: fix handling of scopeid in cifs_convert_addressJeff Layton1-4/+4
The code finds, the '%' sign in an ipv6 address and copies that to a buffer allocated on the stack. It then ignores that buffer, and passes 'pct' to simple_strtoul(), which doesn't work right because we're comparing 'endp' against a completely different string. Fix it by passing the correct pointer. While we're at it, this is a good candidate for conversion to strict_strtoul as well. Cc: [email protected] Cc: David Howells <[email protected]> Reported-by: Björn JACKE <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2011-02-17Merge remote branch 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next ↵Dave Airlie6-36/+40
into drm-fixes * 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next: drm/nouveau: fix suspend/resume on GPUs that don't have PM support drm/nouveau: flips/flipd need to always set 'evict' for move_accel_cleanup() drm/nv40: fix tiling-related setup for a number of chipsets drm/nouveau: fix non-EDIDful native mode selection drm/nouveau: Fix detection of DDC-based LVDS on DCB15 boards. drm/nv04-nv40: Fix NULL dereference when we fail to find an LVDS native mode. drm/nv10: Fix crash when allocating a BO larger than half the available VRAM.
2011-02-17drm/radeon/kms: add missing frac fb div flag for dce4+Alex Deucher1-1/+3
The fixed ref/post dividers are set by the AdjustPll table rather than the ss info table on dce4+. Make sure we enable the fractional feedback dividers when using a fixed post or ref divider on them as well. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=29272 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-02-17drm/radeon/kms: do not reject X16 and Y16X16 floating-point formats on r300Marek Olšák1-0/+2
Signed-off-by: Marek Olšák <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-02-17ARM: S5P: Fix end address in memory resource information for UART devicesThomas Abraham1-6/+6
For S5P platforms, the end address in memory resource information for UART devices is one byte more than the intended value. Fix this by reducing the end address by one byte. Signed-off-by: Thomas Abraham <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2011-02-17ARM: S5P64X0: Cleanup map.h fileKukjin Kim1-41/+42
Signed-off-by: Kukjin Kim <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.