aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-07-23drm/amdgpu: Clear doorbell interrupt status for Sienna CichlidChengzhe Liu3-0/+26
On Sienna Cichlid, in pass-through mode, if we unload the driver in BACO mode(RTPM), then the kernel would receive thousands of interrupts. That's because there is doorbell monitor interrupt on BIF, so KVM keeps injecting interrupts to the guest VM. So we should clear the doorbell interrupt status after BACO exit. v2: Modify coding style and commit message Signed-off-by: Chengzhe Liu <[email protected]> Reviewed-by: Luben Tuikov <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/pm: Fix a bug communicating with the SMU (v5)Luben Tuikov2-47/+244
This fixes a bug which if we probe a non-existing I2C device, and the SMU returns 0xFF, from then on we can never communicate with the SMU, because the code before this patch reads and interprets 0xFF as a terminal error, and thus we never write 0 into register 90 to clear the status (and subsequently send a new command to the SMU.) It is not an error that the SMU returns status 0xFF. This means that the SMU executed the last command successfully (execution status), but the command result is an error of some sort (execution result), depending on what the command was. When doing a status check of the SMU, before we send a new command, the only status which precludes us from sending a new command is 0--the SMU hasn't finished executing a previous command, and 0xFC--the SMU is busy. This bug was seen as the following line in the kernel log, amdgpu: Msg issuing pre-check failed(0xff) and SMU may be not in the right state! when subsequent SMU commands, not necessarily related to I2C, were sent to the SMU. This patch fixes this bug. v2: Add a comment to the description of __smu_cmn_poll_stat() to explain why we're NOT defining the SMU FW return codes as macros, but are instead hard-coding them. Such a change, can be followed up by a subsequent patch. v3: The changes are, a) Add comments to break labels in __smu_cmn_reg2errno(). b) When an unknown/unspecified/undefined result is returned back from the SMU, map that to -EREMOTEIO, to distinguish failure at the SMU FW. c) Add kernel-doc to smu_cmn_send_msg_without_waiting(), smu_cmn_wait_for_response(), smu_cmn_send_smc_msg_with_param(). d) In smu_cmn_send_smc_msg_with_param(), since we wait for completion of the command, if the result of the completion is undefined/unknown/unspecified, we print that to the kernel log. v4: a) Add macros as requested, though redundant, to be removed when SMU consolidates for all ASICs--see comment in code. b) Get out if the SMU code is unknown. v5: Rename the macro names. Cc: Alex Deucher <[email protected]> Cc: Evan Quan <[email protected]> Cc: Lijo Lazar <[email protected]> Fixes: fcb1fe9c9e0031 ("drm/amd/powerplay: pre-check the SMU state before issuing message") Signed-off-by: Luben Tuikov <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add pci device id for cyan_skillfishTao Zhou1-0/+3
Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add autoload_supported check for RLC autoloadLang Yu1-1/+2
Asic cyan_skilfish2 won't support RLC autoload when using front door loading. We just use PSP to load firmware like gfx9 here. So add autoload_supported flag check instead of just checking firmware load type for RLC autoload. Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: enable SMU for cyan_skilfishLang Yu2-8/+13
Enable SMU support for cyan_skilfish. v2: Squash in fix (Alex) Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add check_fw_version support for cyan_skillfishLang Yu3-0/+5
Add check_fw_version function support for cyan_skillfish. Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add basic ppt functions for cyan_skilfishLang Yu3-0/+105
Add basic ppt funcs support or cyan_skilfish. Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add smu interface header for cyan_skilfishLang Yu1-0/+95
Add smu11_driver_if_cyan_skillfish.h for cyan_skilfish. Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add smu_v11_8_ppsmc header for cyan_skilfishLang Yu1-0/+70
Add smu_v11_8_ppsmc.h for cyan_skilfish. Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add smu_v11_8_pmfw header for cyan_skilfishLang Yu1-0/+152
Add smu_v11_8_pmfw.h for cyan_skilfish. Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: use direct loading by default for cyan_skillfish2Lang Yu1-0/+3
Will switch to front door loading by default after this function is stable. v2: use APU flags (Alex) Signed-off-by: Lang Yu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: enable psp v11.0.8 for cyan_skillfishLang Yu3-0/+13
Add psp v11.0.8 to ip block initialization. v2: use APU flags (Alex) Signed-off-by: Lang Yu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: init psp v11.0.8 function for cyan_skillfishLang Yu1-0/+7
Add psp v11.0.8 function into psp driver. Signed-off-by: Lang Yu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add psp v11.0.8 driver for cyan_skillfishLang Yu3-0/+239
Introduce the psp v11.0.8 driver for cyan_skillfish. Signed-off-by: Lang Yu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add mp 11.0.8 header for cyan_skillfishLang Yu1-0/+352
The cyan_skillfish will use the mp 11.0.8. Signed-off-by: Lang Yu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add nbio support for cyan_skillfishTao Zhou1-1/+4
nbio version is 2.3. v2: Make it more explicit (Alex) Signed-off-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add chip early init for cyan_skillfishTao Zhou1-0/+5
Set cg/pg flags and rev id for cyan_skillfish. Signed-off-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdkfd: enable cyan_skillfish KFDTao Zhou6-0/+25
Add KFD support for cyan_skillfish. v2: whitespace fixes (Alex) Signed-off-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add gc v10 golden settings for cyan_skillfishTao Zhou1-0/+47
v2: squash in updates from Ray Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add sdma v5 golden settings for cyan_skillfishTao Zhou1-0/+36
Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add cyan_skillfish support in gfx v10Tao Zhou1-0/+14
Add gfx support for cyan_skillfish. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add cyan_skillfish support in gmc v10Tao Zhou1-0/+3
Add gmc support for cyan_skillfish. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: load fw direclty for cyan_skillfishTao Zhou1-0/+2
Use backdoor loading. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add sdma fw loading support for cyan_skillfishTao Zhou1-0/+12
Same as Navi10. v2: squash in updates (Alex) Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add cp/rlc fw loading support for cyan_skillfishTao Zhou1-0/+39
Add cp/rlc fw loading support and gfx golden setting. v2: squash in updates (Alex) Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: set ip blocks for cyan_skillfishTao Zhou1-0/+9
Add ip blocks for cyan_skillfish. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: init family name for cyan_skillfishTao Zhou1-0/+1
Use FAMILY_NV for cyan_skillfish. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: dynamic initialize ip offset for cyan_skillfishTao Zhou5-1/+770
Add ip offset definition for cyan_skillfish and initialize it. v2: squash in ip_offset updates (Alex) Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add cyan_skillfish asic typeTao Zhou3-8/+15
Add cyan_skillfish asic family. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: adjust fw_name string length for tocLang Yu1-1/+1
Adjust toc fw_name string length to PSP_FW_NAME_LEN. Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: increase size for sdma fw name stringTao Zhou1-1/+1
Longer firmware name needs more space. Signed-off-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: add yellow carp pci id (v2)Aaron Liu1-0/+4
Add Yellow Carp PCI id support. v2: add another DID Signed-off-by: Aaron Liu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: update yellow carp external rev_id handlingAaron Liu1-1/+4
0x1681 has a different external revision id. Signed-off-by: Aaron Liu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu/acp: Make PM domain really workKai-Heng Feng1-28/+26
Devices created by mfd_add_hotplug_devices() don't really increase the index of its name, so get_mfd_cell_dev() cannot find any device, hence a NULL dev is passed to pm_genpd_add_device(): [ 56.974926] (NULL device *): amdgpu: device acp_audio_dma.0.auto added to pm domain [ 56.974933] (NULL device *): amdgpu: Failed to add dev to genpd [ 56.974941] [drm:amdgpu_device_ip_init [amdgpu]] *ERROR* hw_init of IP block <acp_ip> failed -22 [ 56.975810] amdgpu 0000:00:01.0: amdgpu: amdgpu_device_ip_init failed [ 56.975839] amdgpu 0000:00:01.0: amdgpu: Fatal error during GPU init [ 56.977136] ------------[ cut here ]------------ [ 56.977143] kernel BUG at mm/slub.c:4206! [ 56.977158] invalid opcode: 0000 [#1] SMP NOPTI [ 56.977167] CPU: 1 PID: 1648 Comm: modprobe Not tainted 5.12.0-051200rc8-generic #202104182230 [ 56.977175] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A68M-HD+, BIOS P5.20 02/13/2019 [ 56.977180] RIP: 0010:kfree+0x3bf/0x410 [ 56.977195] Code: 89 e7 48 d3 e2 f7 da e8 5f 0d 02 00 80 e7 02 75 3e 44 89 ee 4c 89 e7 e8 ef 5f fd ff e9 fa fe ff ff 49 8b 44 24 08 a8 01 75 b7 <0f> 0b 4c 8b 4d b0 48 8b 4d a8 48 89 da 4c 89 e6 41 b8 01 00 00 00 [ 56.977202] RSP: 0018:ffffa48640ff79f0 EFLAGS: 00010246 [ 56.977210] RAX: 0000000000000000 RBX: ffff9286127d5608 RCX: 0000000000000000 [ 56.977215] RDX: 0000000000000000 RSI: ffffffffc099d0fb RDI: ffff9286127d5608 [ 56.977220] RBP: ffffa48640ff7a48 R08: 0000000000000001 R09: 0000000000000001 [ 56.977224] R10: 0000000000000000 R11: ffff9286087d8458 R12: fffff3ae0449f540 [ 56.977229] R13: 0000000000000000 R14: dead000000000122 R15: dead000000000100 [ 56.977234] FS: 00007f9de5929540(0000) GS:ffff928612e80000(0000) knlGS:0000000000000000 [ 56.977240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 56.977245] CR2: 00007f697dd97160 CR3: 00000001110f0000 CR4: 00000000001506e0 [ 56.977251] Call Trace: [ 56.977261] amdgpu_dm_encoder_destroy+0x1b/0x30 [amdgpu] [ 56.978056] drm_mode_config_cleanup+0x4f/0x2e0 [drm] [ 56.978147] ? kfree+0x3dd/0x410 [ 56.978157] ? drm_managed_release+0xc8/0x100 [drm] [ 56.978232] drm_mode_config_init_release+0xe/0x10 [drm] [ 56.978311] drm_managed_release+0x9d/0x100 [drm] [ 56.978388] devm_drm_dev_init_release+0x4d/0x70 [drm] [ 56.978450] devm_action_release+0x15/0x20 [ 56.978459] release_nodes+0x77/0xc0 [ 56.978469] devres_release_all+0x3f/0x50 [ 56.978477] really_probe+0x245/0x460 [ 56.978485] driver_probe_device+0xe9/0x160 [ 56.978492] device_driver_attach+0xab/0xb0 [ 56.978499] __driver_attach+0x8f/0x150 [ 56.978506] ? device_driver_attach+0xb0/0xb0 [ 56.978513] bus_for_each_dev+0x7e/0xc0 [ 56.978521] driver_attach+0x1e/0x20 [ 56.978528] bus_add_driver+0x135/0x1f0 [ 56.978534] driver_register+0x91/0xf0 [ 56.978540] __pci_register_driver+0x54/0x60 [ 56.978549] amdgpu_init+0x77/0x1000 [amdgpu] [ 56.979246] ? 0xffffffffc0dbc000 [ 56.979254] do_one_initcall+0x48/0x1d0 [ 56.979265] ? kmem_cache_alloc_trace+0x120/0x230 [ 56.979274] ? do_init_module+0x28/0x280 [ 56.979282] do_init_module+0x62/0x280 [ 56.979288] load_module+0x71c/0x7a0 [ 56.979296] __do_sys_finit_module+0xc2/0x120 [ 56.979305] __x64_sys_finit_module+0x1a/0x20 [ 56.979311] do_syscall_64+0x38/0x90 [ 56.979319] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 56.979328] RIP: 0033:0x7f9de54f989d [ 56.979335] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 f5 0c 00 f7 d8 64 89 01 48 [ 56.979342] RSP: 002b:00007ffe3c395a28 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 56.979350] RAX: ffffffffffffffda RBX: 0000560df3ef4330 RCX: 00007f9de54f989d [ 56.979355] RDX: 0000000000000000 RSI: 0000560df3a07358 RDI: 000000000000000f [ 56.979360] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000 [ 56.979365] R10: 000000000000000f R11: 0000000000000246 R12: 0000560df3a07358 [ 56.979369] R13: 0000000000000000 R14: 0000560df3ef4460 R15: 0000560df3ef4330 [ 56.979377] Modules linked in: amdgpu(+) iommu_v2 gpu_sched drm_ttm_helper ttm drm_kms_helper cec rc_core i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt nft_counter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security ip_set nf_tables libcrc32c nfnetlink ip6_tables iptable_filter bpfilter input_leds binfmt_misc edac_mce_amd kvm_amd ccp kvm snd_hda_codec_realtek snd_hda_codec_generic crct10dif_pclmul snd_hda_codec_hdmi ledtrig_audio ghash_clmulni_intel aesni_intel snd_hda_intel snd_intel_dspcfg snd_seq_midi crypto_simd snd_intel_sdw_acpi cryptd snd_hda_codec snd_seq_midi_event snd_rawmidi snd_hda_core snd_hwdep snd_seq fam15h_power k10temp snd_pcm snd_seq_device snd_timer snd mac_hid soundcore sch_fq_codel nct6775 hwmon_vid drm ip_tables x_tables autofs4 dm_mirror dm_region_hash dm_log hid_generic usbhid hid uas usb_storage r8169 crc32_pclmul realtek ahci xhci_pci i2c_piix4 [ 56.979521] xhci_pci_renesas libahci video [ 56.979541] ---[ end trace cb8f6a346f18da7b ]--- Instead of finding MFD hotplugged device by its name, simply iterate over the child devices to avoid the issue. Squash in unused variable removal (Alex) BugLink: https://bugs.launchpad.net/bugs/1920674 Fixes: 25030321ba28 ("drm/amd: add pm domain for ACP IP sub blocks") Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/amdgpu: add consistent PSP FW loading size checkingCandice Li11-86/+95
Signed-off-by: Candice Li <[email protected]> Reviewed-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/amdgpu: consider kernel job always not guiltyJingwen Chen1-3/+3
[Why] Currently all timedout job will be considered to be guilty. In SRIOV multi-vf use case, the vf flr happens first and then job time out is found. There can be several jobs timeout during a very small time slice. And if the innocent sdma job time out is found before the real bad job, then the innocent sdma job will be set to guilty. This will lead to a page fault after resubmitting job. [How] If the job is a kernel job, we will always consider it not guilty Reviewed-by: Christian König <[email protected]> Signed-off-by: Jingwen Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdkfd: Update SMI throttle event bitmaskGraham Sider6-11/+15
Update Arcturus/Aldebaran thermal throttle SMI event path to use ASIC-independent throttler bits when logging. Signed-off-by: Graham Sider <[email protected]> Reviewed-by: Harish Kasiviswanathan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: Fix documentaion for dm_dmub_outbox1_low_irqAnson Jacob1-1/+1
Fix make htmldocs complaint: ./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:628: warning: Excess function parameter 'interrupt_params' description in 'DMUB_TRACE_MAX_READ' v2: Moved DMUB_TRACE_MAX_READ macro above function documentation Signed-off-by: Anson Jacob <[email protected]> CC: Harry Wentland <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/amdgpu: Add a new line to debugfs phy_settings outputAnson Jacob1-1/+1
Add new line to phy_settings output Signed-off-by: Anson Jacob <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amd/amdgpu: Update debugfs link_settings output link_rate field in hexAnson Jacob1-8/+8
link_rate is updated via debugfs using hex values, set it to output in hex as well. eg: Resolution: 1920x1080@144Hz cat /sys/kernel/debug/dri/0/DP-1/link_settings Current: 4 0x14 0 Verified: 4 0x1e 0 Reported: 4 0x1e 16 Preferred: 0 0x0 0 echo "4 0x1e" > /sys/kernel/debug/dri/0/DP-1/link_settings cat /sys/kernel/debug/dri/0/DP-1/link_settings Current: 4 0x1e 0 Verified: 4 0x1e 0 Reported: 4 0x1e 16 Preferred: 4 0x1e 0 Signed-off-by: Anson Jacob <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdkfd: Fix a concurrency issue during kfd recoveryOak Zeng4-11/+14
start_cpsch and stop_cpsch can be called during kfd device initialization or during gpu reset/recovery. So they can run concurrently. Currently in start_cpsch and stop_cpsch, pm_init and pm_uninit is not protected by the dpm lock. Imagine such a case that user use packet manager's function to submit a pm4 packet to hang hws (ie through command cat /sys/class/kfd/kfd/topology/nodes/1/gpu_id | sudo tee /sys/kernel/debug/kfd/hang_hws), while kfd device is under device reset/recovery so packet manager can be not initialized. There will be unpredictable protection fault in such case. This patch moves pm_init/uninit inside the dpm lock and check packet manager is initialized before using packet manager function. Signed-off-by: Oak Zeng <[email protected]> Acked-by: Christian Konig <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdkfd: Set priv_queue to NULL after it is freedOak Zeng1-0/+1
This variable will be used to determine whether packet manager is initialized or not, in a future patch. Signed-off-by: Oak Zeng <[email protected]> Acked-by: Christian Konig <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdkfd: Renaming dqm->packets to dqm->packet_mgrOak Zeng4-16/+16
Renaming packets to packet_mgr to reflect the real meaning of this variable. Signed-off-by: Oak Zeng <[email protected]> Acked-by: Christian Konig <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: Change a few function namesOak Zeng1-8/+8
Function name "psp_np_fw_load" is not proper as people don't know _np_fw_ means "non psp firmware". Change the function name to psp_load_non_psp_fw for better understanding. Same thing for function psp_execute_np_fw_load. Signed-off-by: Oak Zeng <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Christian Konig <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: Fix a printing messageOak Zeng4-4/+4
The printing message "PSP loading VCN firmware" is mis-leading because people might think driver is loading VCN firmware. Actually when this message is printed, driver is just preparing some VCN ucode, not loading VCN firmware yet. The actual VCN firmware loading will be in the PSP block hw_init. Fix the printing message Signed-off-by: Oak Zeng <[email protected]> Reviewed-by: Christian Konig <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: Add error message when programing registers failsRoy Sun1-4/+22
Squash in warning fix (Alex) Signed-off-by: Roy Sun <[email protected]> Reviewed-by: Zhou pengju <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu: Change the imprecise function nameRoy Sun5-13/+13
The callback functions are used for SRIOV read/write instead of just for rlcg read/write Signed-off-by: Roy Sun <[email protected]> Reviewed-by: Zhou pengju <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdgpu - Corrected the video codecs array name for yellow carpVeerabadhran Gopalakrishnan1-2/+2
Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]> Reviewed-by: James Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdkfd: report pcie bandwidth to the kfdJonathan Kim3-0/+64
Similar to xGMI reporting the min/max bandwidth between direct peers, PCIe will report the min/max bandwidth to the KFD. Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-07-23drm/amdkfd: report xgmi bandwidth between direct peers to the kfdJonathan Kim5-0/+51
Report the min/max bandwidth in megabytes to the kfd for direct xgmi connections only. Indirect peers will report 0 since indirect route is unknown. Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.