aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-11-26arm64: KVM: fix unmapping with 48-bit VAsMark Rutland1-1/+2
Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a4e499792e (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [<ffff80000009b768>] lr : [<ffff80000009cad8>] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [<ffff80000009b768>] unmap_range+0x120/0x580 [<ffff80000009cad4>] free_hyp_pgds+0xa8/0xe4 [<ffff80000009b374>] kvm_arch_init+0x268/0x44c [<ffff80000009606c>] kvm_init+0x24/0x260 [<ffff80000009a338>] arm_init+0x18/0x24 [<ffff8000000814bc>] do_one_initcall+0x88/0x1a0 [<ffff8000006aaac0>] kernel_init_freeable+0x148/0x1e8 [<ffff8000004f8ee4>] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Jungseok Lee <[email protected]> Acked-by: Marc Zyngier <[email protected]> Acked-by: Christoffer Dall <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2014-11-26of/fdt: memblock_reserve /memreserve/ regions in the case of partial overlapIan Campbell1-2/+0
memblock_is_region_reserved() returns true in the case of a partial overlap, meaning that the current code fails to reserve the non-overlapping portion. This call was introduced as part of d1552ce449eb "of/fdt: move memreserve and dtb memory reservations into core" which went into v3.16. I observed this causing a Midway system with a buggy fdt (the header declares itself to be larger than it really is) failing to boot because the over-inflated size of the fdt was causing it to seem to run into the swapper_pg_dir region, meaning the DT wasn't reserved. The symptoms were failing to find an disks or network and failing to boot. However given the ambiguity of whether things like the initrd are covered by /memreserve/ and similar I think it is best to also register the region rather than just ignoring it. Since memblock_reserve() handles overlaps just fine lets just warn and carry on. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Grant Likely <[email protected]> Cc: Rob Herring <[email protected]> Cc: [email protected] # v3.16+
2014-11-26drm/i915: Cancel vdd off work before suspendVille Syrjälä1-0/+1
Currently we just make sure vdd is off before suspending, but we don't cancel the vdd off work. The work wil not touch vdd if want_panel_vdd==false so in theory this is fine. In the past that was perfectly fine since the vdd off work didn't do anything when want_panel_vdd==false, so even if the work would have been run during system resume before i915 has resumed, nothing would happen. However since pps_lock() will now grab the power domain references before it can check want_panel_vdd, we may end up toggling the power wells on/off already before the driver has resumed. That is not really acceptable, so cancel the vdd off work when suspending the encoder. The problem appeared when pps_lock() was introduced in: commit 773538e86081d146e0020435d614f4b96996c1f9 Author: Ville Syrjälä <[email protected]> Date: Thu Sep 4 14:54:56 2014 +0300 drm/i915: Reset power sequencer pipe tracking when disp2d is off Signed-off-by: Ville Syrjälä <[email protected]> Reviewed-by: Imre Deak <[email protected]> Signed-off-by: Jani Nikula <[email protected]>
2014-11-26ufs: fix NULL dereference when no regulators are definedAkinobu Mita1-0/+6
If no voltage supply regulators are defined for the UFS devices (assumed they are always-on), ufshcd_config_vreg_load() can be called on suspend/resume paths with vreg == NULL as hba->vreg_info.vcc* equal to NULL, and it causes NULL pointer dereference. This fixes it by making ufshcd_config_vreg_{h,l}pm noop when no regulators are defined. Signed-off-by: Akinobu Mita <[email protected]> Reviewed-by: Subhash Jadavani <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2014-11-26ufs: ensure clk gating work is finished before module unloadingAkinobu Mita1-0/+2
When dynamic clk gating feature is enabled, delayed workqueue machanism is used in order to detect certain period of inactivity. But there is no guarantee that scheduled gating work is completed before module unloading. So it can cause kernel crash by accessing memory after it was freed. Fix it by cancelling clk gating and ungating works and ensure that its execution is finished before module unloading. Signed-off-by: Akinobu Mita <[email protected]> Reviewed-by: Subhash Jadavani <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2014-11-26irqchip: brcmstb-l2: Fix error handling of irq_of_parse_and_mapDmitry Torokhov1-2/+2
Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov <[email protected]> Acked-by: Florian Fainelli <[email protected]> Tested-by: Kevin Cernekee <[email protected]> Link: https://lkml.kernel.org/r/20141114221642.GA37468@dtor-ws Signed-off-by: Jason Cooper <[email protected]>
2014-11-26irqchip: bcm7120-l2: Fix error handling of irq_of_parse_and_mapDmitry Torokhov1-2/+2
Return value of irq_of_parse_and_map() is unsigned int, with 0 indicating failure, so testing for negative result never works. Signed-off-by: Dmitry Torokhov <[email protected]> Acked-by: Florian Fainelli <[email protected]> Tested-by: Kevin Cernekee <[email protected]> Link: https://lkml.kernel.org/r/20141114221614.GA37395@dtor-ws Signed-off-by: Jason Cooper <[email protected]>
2014-11-25Merge branch 'for-3.18' of git://linux-nfs.org/~bfields/linuxLinus Torvalds3-16/+28
Pull nfsd bugfixes from Bruce Fields: "These fix one mishandling of the case when security labels are configured out, and two races in the 4.1 backchannel code" * 'for-3.18' of git://linux-nfs.org/~bfields/linux: nfsd: Fix slot wake up race in the nfsv4.1 callback code SUNRPC: Fix locking around callback channel reply receive nfsd: correctly define v4.2 support attributes
2014-11-25Merge git://git.kvack.org/~bcrl/aio-fixesLinus Torvalds1-7/+14
Pull aio fix from Ben LaHaise: "Dirty page accounting fix for aio" * git://git.kvack.org/~bcrl/aio-fixes: aio: fix uncorrent dirty pages accouting when truncating AIO ring buffer
2014-11-25Merge branch 'merge' of ↵Linus Torvalds10-22/+60
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "This series fix a nasty issue with radeon adapters on powerpc servers, it's all CC'ed stable and has the relevant maintainers ack's/reviews. Basically, some (radeon) adapters have issues with MSI addresses above 1T (only support 40-bits). We had powerpc specific quirk but it only listed a specific revision of an adapter that we shipped with our machines and didn't properly handle the audio function which some distros enable nowadays. So we made the quirk generic and fixed both the graphic and audio drivers properly to use it. Without that, ppc64 server machines will crash at boot with a radeon adapter. Note: This has been brewing for a while, it just needed a last respin which got delayed due to us moving ozlabs to a new location in town and other such things taking priority" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pci: Remove unused force_32bit_msi quirk powerpc/pseries: Honor the generic "no_64bit_msi" flag powerpc/powernv: Honor the generic "no_64bit_msi" flag sound/radeon: Move 64-bit MSI quirk from arch to driver gpu/radeon: Set flag to indicate broken 64-bit MSI PCI/MSI: Add device flag indicating that 64-bit MSIs don't work ALSA: hda - Limit 40bit DMA for AMD HDMI controllers
2014-11-25Merge tag 'hwmon-for-linus-v3.18-rc7' of ↵Linus Torvalds1-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull a hwmon fix from Guenter Roeck: "Fix hwmon registration problem in g762 driver" * tag 'hwmon-for-linus-v3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (g762) fix call to devm_hwmon_device_register_with_groups()
2014-11-25Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds7-34/+32
https://git.linaro.org/people/mike.turquette/linux Pull clock fixes from Mike Turquette: "The fixes for the clock framework are all regressions in drivers, plus a single fix in one of the basic clock templates. No fixes to the core this time around. As with most clock driver fixes these run the gamut from fixing a build warning to fixing wrecked memory timings, with a little USB tossed in for fun" * tag 'clk-fixes-for-linus' of https://git.linaro.org/people/mike.turquette/linux: clk: pxa: fix pxa27x CCCR bit usage clk-divider: Fix READ_ONLY when divider > 1 clk: qcom: Fix duplicate rbcpr clock name clk: at91: usb: fix at91sam9x5 recalc, round and set rate clk: at91: usb: fix at91rm9200 round and set rate
2014-11-25Revert "serial: of-serial: add PM suspend/resume support"Greg Kroah-Hartman1-27/+0
This reverts commit 2dea53bf57783f243c892e99c10c6921e956aa7e. Turns out to be broken :( Cc: Jingchang Lu <[email protected]> Cc: Arnd Bergmann <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-11-25tg3: fix ring init when there are more TX than RX channelsThadeu Lima de Souza Cascardo1-1/+2
If TX channels are set to 4 and RX channels are set to less than 4, using ethtool -L, the driver will try to initialize more RX channels than it has allocated, causing an oops. This fix only initializes the RX ring if it has been allocated. Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-25tcp: fix possible NULL dereference in tcp_vX_send_reset()Eric Dumazet2-2/+8
After commit ca777eff51f7 ("tcp: remove dst refcount false sharing for prequeue mode") we have to relax check against skb dst in tcp_v[46]_send_reset() if prequeue dropped the dst. If a socket is provided, a full lookup was done to find this socket, so the dst test can be skipped. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88191 Reported-by: Jaša Bartelj <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Daniel Borkmann <[email protected]> Fixes: ca777eff51f7 ("tcp: remove dst refcount false sharing for prequeue mode") Signed-off-by: David S. Miller <[email protected]>
2014-11-25rtlwifi: Change order in device startupLarry Finger1-10/+10
The existing order of steps when starting the PCI devices works for 2.4G devices, but fails to initialize the 5G section of the RTL8821AE hardware. This patch is needed to fix the regression reported in Bug #88811 (https://bugzilla.kernel.org/show_bug.cgi?id=88811). Reported-by: Valerio Passini <[email protected]> Tested-by: Valerio Passini <[email protected]> Signed-off-by: Larry Finger <[email protected]> Cc: Valerio Passini <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2014-11-25rtlwifi: rtl8821ae: Fix 5G detection problemLarry Finger1-2/+3
The changes associated with moving this driver from staging to the regular tree missed one section setting the allowable rates for the 5GHz band. This patch is needed to fix the regression reported in Bug #88811 (https://bugzilla.kernel.org/show_bug.cgi?id=88811). Reported-by: Valerio Passini <[email protected]> Tested-by: Valerio Passini <[email protected]> Signed-off-by: Larry Finger <[email protected]> Cc: Valerio Passini <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2014-11-25Revert "netfilter: conntrack: fix race in __nf_conntrack_confirm against ↵Pablo Neira1-8/+6
get_next_corpse" This reverts commit 5195c14c8b27cc0b18220ddbf0e5ad3328a04187. If the conntrack clashes with an existing one, it is left out of the unconfirmed list, thus, crashing when dropping the packet and releasing the conntrack since golden rule is that conntracks are always placed in any of the existing lists for traceability reasons. Reported-by: Daniel Borkmann <[email protected]> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=88841 Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-25Merge branch 'ipv6_vxlan_outer_udp_csum'David S. Miller2-5/+3
Alexander Duyck says: ==================== Fix outer UDP checksums for IPv6 VXLAN tunnels In testing against an older kernel I found a couple issues in the IPv6 VXLAN tunnel checksum logic for the outer UDP checksum. First the default transitioned from using an outer checksum to not using one. Second, sometime after that the checksum inputs were changed resulting the checksum not being correct if it were computed. These two issues prevented a ping from the newer kernel to the older one. With these two changes applied I verified I was able to send traffic over the VXLAN tunnel to a link partner on an older kernel. The boolean flip fix can be submitted for 3.17 stable as well since the patch that introduced the issue was included in that kernel. ==================== Signed-off-by: David S. Miller <[email protected]>
2014-11-25vxlan: Fix boolean flip in VXLAN_F_UDP_ZERO_CSUM6_[TX|RX]Alexander Duyck1-2/+2
In "vxlan: Call udp_sock_create" there was a logic error that resulted in the default for IPv6 VXLAN tunnels going from using checksums to not using checksums. Since there is currently no support in iproute2 for setting these values it means that a kernel after the change cannot talk over a IPv6 VXLAN tunnel to a kernel prior the change. Fixes: 3ee64f3 ("vxlan: Call udp_sock_create") Cc: Tom Herbert <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Acked-by: Tom Herbert <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-25ip6_udp_tunnel: Fix checksum calculationAlexander Duyck1-3/+1
The UDP checksum calculation for VXLAN tunnels is currently using the socket addresses instead of the actual packet source and destination addresses. As a result the checksum calculated is incorrect in some cases. Also uh->check was being set twice, first it was set to 0, and then it is set again in udp6_set_csum. This change removes the redundant assignment to 0. Fixes: acbf74a7 ("vxlan: Refactor vxlan driver to make use of the common UDP tunnel functions.") Cc: Andy Zhou <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-25net-timestamp: Fix a documentation typoAndrew Lutomirski1-1/+1
SOF_TIMESTAMPING_OPT_ID puts the id in ee_data, not ee_info. Cc: Willem de Bruijn <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-25Input: xpad - use proper endpoint typeGreg Kroah-Hartman1-3/+13
The xpad wireless endpoint is not a bulk endpoint on my devices, but rather an interrupt one, so the USB core complains when it is submitted. I'm guessing that the author really did mean that this should be an interrupt urb, but as there are a zillion different xpad devices out there, let's cover out bases and handle both bulk and interrupt endpoints just as easily. Signed-off-by: "Pierre-Loup A. Griffais" <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Cc: stable <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-11-25Input: elantech - trust firmware about trackpoint presenceDmitry Torokhov1-9/+1
Only try to parse data as coming from trackpoint if firmware told us that trackpoint is present. Fixes commit caeb0d37fa3e387eb0dd22e5d497523c002033d1 Reported-and-tested-by: Marcus Overhagen <[email protected]> Reported-and-tested-by: Anders Kaseorg <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2014-11-24usb-quirks: Add reset-resume quirk for MS Wireless Laser Mouse 6000Hans de Goede1-0/+3
This wireless mouse receiver needs a reset-resume quirk to properly come out of reset. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1165206 Signed-off-by: Hans de Goede <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-11-24net/ping: handle protocol mismatching scenarioJane Zhou1-0/+2
ping_lookup() may return a wrong sock if sk_buff's and sock's protocols dont' match. For example, sk_buff's protocol is ETH_P_IPV6, but sock's sk_family is AF_INET, in that case, if sk->sk_bound_dev_if is zero, a wrong sock will be returned. the fix is to "continue" the searching, if no matching, return NULL. Cc: "David S. Miller" <[email protected]> Cc: Alexey Kuznetsov <[email protected]> Cc: James Morris <[email protected]> Cc: Hideaki YOSHIFUJI <[email protected]> Cc: Patrick McHardy <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Jane Zhou <[email protected]> Signed-off-by: Yiwei Zhao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-24af_packet: fix sparse warningMichael S. Tsirkin1-1/+1
af_packet produces lots of these: net/packet/af_packet.c:384:39: warning: incorrect type in return expression (different modifiers) net/packet/af_packet.c:384:39: expected struct page [pure] * net/packet/af_packet.c:384:39: got struct page * this seems to be because sparse does not realize that _pure refers to function, not the returned pointer. Tweak code slightly to avoid the warning. Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-24xen-netback: do not report success if backend_create_xenvif() failsAlexey Khoroshilov1-6/+9
If xenvif_alloc() or xenbus_scanf() fail in backend_create_xenvif(), xenbus is left in offline mode but netback_probe() reports success. The patch implements propagation of error code for backend_create_xenvif(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <[email protected]> Acked-by: Wei Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-24ipv6: gre: fix wrong skb->protocol in WCCPYuri Chislov1-2/+2
When using GRE redirection in WCCP, it sets the wrong skb->protocol, that is, ETH_P_IP instead of ETH_P_IPV6 for the encapuslated traffic. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Cc: Dmitry Kozlov <[email protected]> Signed-off-by: Yuri Chislov <[email protected]> Tested-by: Yuri Chislov <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-24Merge tag 'iwlwifi-for-john-2014-11-23' of ↵John W. Linville2-3/+11
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Emmanuel Grumbach <[email protected]> says: "Not all the firmware know how to handle the HOT_SPOT_CMD. Make sure that the firmware will know this command before sending it. This avoids a firmware crash." Signed-off-by: John W. Linville <[email protected]>
2014-11-24drm/i915: Ignore SURFLIVE and flip counter when the GPU gets resetVille Syrjälä1-0/+4
During a GPU reset we need to get pending page flip cleared out since the ring contents are gone and flip will never complete on its own. This used to work until the mmio vs. CS flip race detection came about. That piece of code is looking for a specific surface address in the SURFLIVE register, but as a flip to that address may never happen the check may never pass. So we should just skip the SURFLIVE and flip counter checks when the GPU gets reset. intel_display_handle_reset() tries to effectively complete the flip anyway by calling .update_primary_plane(). But that may not satisfy the conditions of the mmio vs. CS race detection since there's no guarantee that a modeset didn't sneak in between the GPU reset and intel_display_handle_reset(). Such a modeset will not wait for pending flips due to the ongoing GPU reset, and then the primary plane updates performed by intel_display_handle_reset() will already use the new surface address, and thus the surface address the flip is waiting for might never appear in SURFLIVE. The result is that the flip will never complete and attempts to perform further page flips will fail with -EBUSY. During the GPU reset intel_crtc_has_pending_flip() will return false regardless, so the deadlock with a modeset vs. the error work acquiring crtc->mutex was avoided. And the reset_counter check in intel_crtc_has_pending_flip() actually made this bug even less severe since it allowed normal modesets to go through even though there's a pending flip. This is a regression introduced by me here: commit 75f7f3ec600524c9544cc31695155f1a9ddbe1d9 Author: Ville Syrjälä <[email protected]> Date: Tue Apr 15 21:41:34 2014 +0300 drm/i915: Fix mmio vs. CS flip race on ILK+ Testcase: igt/kms_flip/flip-vs-panning-vs-hang Signed-off-by: Ville Syrjälä <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Jani Nikula <[email protected]>
2014-11-24MIPS: Fix address type used for early memory detection.Steven J. Hill1-1/+1
In 'early_parse_mem' the data type used for the start and size of a memory region specified on the command line is incorrect. If 64-bit addressing is used, the value gets truncated. Signed-off-by: Steven J. Hill <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/8456/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: Kconfig: Don't allow both microMIPS and SmartMIPS to be selected.Markos Chandras1-2/+12
microMIPS and SmartMIPS can't be used together. This fixes the following build problem: Warning: the 32-bit microMIPS architecture does not support the `smartmips' extension arch/mips/kernel/entry.S:90: Error: unrecognized opcode `mtlhx $24' [...] arch/mips/kernel/entry.S:109: Error: unrecognized opcode `mtlhx $24' Signed-off-by: Markos Chandras <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/7421/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: kernel: cps-vec: Set ISA level to mips32r2 for the MIPS MT ASEMarkos Chandras1-0/+2
Fixes the following build warnings: arch/mips/kernel/cps-vec.S: Assembler messages: arch/mips/kernel/cps-vec.S:228: Warning: the `mt' extension requires MIPS32 revision 2 or greater [...] arch/mips/kernel/cps-vec.S: Assembler messages: arch/mips/kernel/cps-vec.S:345: Warning: the `mt' extension requires MIPS32 revision 2 or greater Signed-off-by: Markos Chandras <[email protected]> Cc: Paul Burton <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/7355/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: Netlogic: handle modular AHCI buildsFlorian Fainelli1-2/+4
Commits a951440971d0 ("MIPS: Netlogic: Support for XLP3XX on-chip SATA") and fedfcb1137d2 ("MIPS: Netlogic: XLP9XX on-chip SATA support") added ahci-init and ahci-init-xlp2 as objects to build when CONFIG_SATA_AHCI is enabled. If CONFIG_SATA_AHCI is made modular, these two files will also get built as modules (obj-m), which will result in the following linking failure: ERROR: "nlm_set_pic_extra_ack" [arch/mips/netlogic/xlp/ahci-init.ko] undefined! ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/ahci-init.ko] undefined! ERROR: "nlm_nodes" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! ERROR: "nlm_set_pic_extra_ack" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! ERROR: "xlp_socdev_to_node" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/ahci-init-xlp2.ko] undefined! Just check whether CONFIG_SATA_AHCI is defined for this build, and if that is the case, add these objects to the list of built-in object files. Signed-off-by: Florian Fainelli <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/7855/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: Netlogic: handle modular USB caseFlorian Fainelli1-2/+4
Commit 1004165f346a ("MIPS: Netlogic: USB support for XLP") and then commit 9eac3591e78b ("MIPS: Netlogic: Add support for USB on XLP2xx") added usb-init and usb-init-xlp2 as objects to build when CONFIG_USB is enabled. If CONFIG_USB is made modular, these two files will also get built as modules (obj-m), which will result in the following linking failure: ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/usb-init.ko] undefined! ERROR: "nlm_nodes" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! ERROR: "nlm_set_pic_extra_ack" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! ERROR: "xlp_socdev_to_node" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! ERROR: "nlm_io_base" [arch/mips/netlogic/xlp/usb-init-xlp2.ko] undefined! Just check whether CONFIG_USB is defined for this build, and if that is the case, add these objects to the list of built-in object files. Signed-off-by: Florian Fainelli <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/7854/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: Loongson: Make platform serial setup always built-in.Aaro Koskinen1-1/+2
If SERIAL_8250 is compiled as a module, the platform specific setup for Loongson will be a module too, and it will not work very well. At least on Loongson 3 it will trigger a build failure, since loongson_sysconf is not exported to modules. Fix by making the platform specific serial code always built-in. Signed-off-by: Aaro Koskinen <[email protected]> Reported-by: Ralf Baechle <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Huacai Chen <[email protected]> Cc: Markos Chandras <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/8533/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: fix EVA & non-SMP non-FPU FP context signal handlingPaul Burton1-4/+4
The save_fp_context & restore_fp_context pointers were being assigned to the wrong variables if either: - The kernel is configured for UP & runs on a system without an FPU, since b2ead5282885 "MIPS: Move & rename fpu_emulator_{save,restore}_context". - The kernel is configured for EVA, since ca750649e08c "MIPS: kernel: signal: Prevent save/restore FPU context in user memory". This would lead to FP context being clobbered incorrectly when setting up a sigcontext, then the garbage values being saved uselessly when returning from the signal. Fix by swapping the pointer assignments appropriately. Signed-off-by: Paul Burton <[email protected]> Cc: [email protected] # v3.15+ Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/8230/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: cpu-probe: Set the FTLB probability bit on supported coresMarkos Chandras2-1/+34
Make use of the Config6/FLTBP bit to set the probability of a TLBWR instruction to hit the FTLB or the VTLB. A value of 0 (which may be the default value on certain cores, such as proAptiv or P5600) means that a TLBWR instruction will never hit the VTLB which leads to performance limitations since it effectively decreases the number of available TLB slots. Signed-off-by: Markos Chandras <[email protected]> Reviewed-by: James Hogan <[email protected]> Cc: <[email protected]> # v3.15+ Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/8368/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: BMIPS: Fix ".previous without corresponding .section" warningsKevin Cernekee1-3/+0
Commit 078a55fc824c1 ("Delete __cpuinit/__CPUINIT usage from MIPS code") removed our __CPUINIT directives, so now the ".previous" directives are superfluous. Remove them. Signed-off-by: Kevin Cernekee <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/8156/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: uaccess.h: Fix strnlen_user comment.Ralf Baechle1-4/+2
Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: r4kcache: Add EVA case for protected_writeback_dcache_lineMarkos Chandras1-0/+4
Commit de8974e3f76c0 ("MIPS: asm: r4kcache: Add EVA cache flushing functions") added cache function for EVA using the cachee instruction. However, it didn't add a case for the protected_writeback_dcache_line. mips_dsemul() calls r4k_flush_cache_sigtramp() which in turn uses the protected_writeback_dcache_line() to flush the trampoline code back to memory. This used the wrong "cache" instruction leading to random userland crashes on non-FPU cores. Signed-off-by: Markos Chandras <[email protected]> Cc: <[email protected]> # v3.15+ Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/8331/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: Fix info about plat_setup in arch_mem_init commentRafał Miłecki1-1/+1
Signed-off-by: Rafał Miłecki <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/7607/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: rtlx: Remove KERN_DEBUG from pr_debug() arguments in rtlx.cMasanari Iida1-2/+2
Signed-off-by: Masanari Iida <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/7938/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24MIPS: SEAD3: Fix LED device registration.Ralf Baechle1-6/+2
This isn't a module and shouldn't be one. Signed-off-by: Ralf Baechle <[email protected]> Cc: Markos Chandras <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/8202/
2014-11-24MIPS: Fix a copy & paste error in unistd.hHuacai Chen1-1/+1
Commit 5df4c8dbbc (MIPS: Wire up bpf syscall.) break the N32 build because of a copy & paste error. Signed-off-by: Huacai Chen <[email protected]> Cc: John Crispin <[email protected]> Cc: Steven J. Hill <[email protected]> Cc: [email protected] Cc: Fuxin Zhang <[email protected]> Cc: Zhangjin Wu <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/8390/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-24powerpc/pci: Remove unused force_32bit_msi quirkBenjamin Herrenschmidt2-12/+0
This is now fully replaced with the generic "no_64bit_msi" one that is set by the respective drivers directly. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2014-11-24powerpc/pseries: Honor the generic "no_64bit_msi" flagBenjamin Herrenschmidt1-1/+1
Instead of the arch specific quirk which we are deprecating Signed-off-by: Benjamin Herrenschmidt <[email protected]> CC: <[email protected]>
2014-11-24powerpc/powernv: Honor the generic "no_64bit_msi" flagBenjamin Herrenschmidt2-4/+2
Instead of the arch specific quirk which we are deprecating and that drivers don't understand. Signed-off-by: Benjamin Herrenschmidt <[email protected]> CC: <[email protected]>
2014-11-24sound/radeon: Move 64-bit MSI quirk from arch to driverBenjamin Herrenschmidt2-2/+9
A number of radeon cards have a HW limitation causing them to be unable to generate the full 64-bit of address bits for MSIs. This breaks MSIs on some platforms such as POWER machines. We used to have a powerpc specific quirk to address that on a single card, but this doesn't scale very well, this is better put under control of the drivers who know precisely what a given HW revision can do. We now have a generic quirk in the PCI code. We should set it appropriately for all radeon's from the audio driver. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Takashi Iwai <[email protected]> Reviewed-by: Alex Deucher <[email protected]> CC: <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.