aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-03-10xen: events: rename restore_cpu_pirqs -> restore_pirqsIan Campbell1-2/+2
There is nothing per-cpu about this function. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: remove unused public functionsIan Campbell2-29/+3
I was unable to find any user of these functions in either the functionality pending for 2.6.39 or the xen/next-2.6.32 branch of xen.git An exception to this was xen_gsi_from_irq which did appear to be used in xen/next-2.6.32's pciback. However in the 2.6.39 version of pciback xen_pirq_from_irq is, correctly AFAICT, used instead. Only a minority of functions in events.h use "extern" so drop it from those places for consistency. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: fix xen_map_pirq_gsi error returnIan Campbell1-1/+1
Fix initial value of irq so that first goto out (if pirq or gsi arguments are too large) actually returns an error. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: simplify commentIan Campbell2-10/+4
It is never valid assume any particular relationship between a Xen PIRQ number and and Linux IRQ number so there is no need to hedge when saying so. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: separate two unrelated halves of if conditionIan Campbell1-4/+8
Clarifies which bit the comment applies to. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: remove dom0 specific xen_create_msi_irqIan Campbell3-47/+40
The function name does not distinguish it from xen_allocate_pirq_msi (which operates on domU and pvhvm domains rather than dom0). Hoist domain 0 specific functionality up into the only caller leaving functionality common to all guest types in xen_bind_pirq_msi_to_irq. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: use xen_bind_pirq_msi_to_irq from xen_create_msi_irqIan Campbell3-32/+10
Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: push set_irq_msi down into xen_create_msi_irqIan Campbell2-10/+10
Makes the tail end of this function look even more like xen_bind_pirq_msi_to_irq. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: update pirq_to_irq in xen_create_msi_irqIan Campbell1-0/+1
I don't think this was a deliberate ommision. Makes the tail end of this function look even more like xen_bind_pirq_msi_to_irq. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: refactor xen_create_msi_irq slightlyIan Campbell1-9/+6
Calling PHYSDEVOP_map_pirq earlier simplifies error handling and starts to make the tail end of this function look like xen_bind_pirq_msi_to_irq. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: separate MSI PIRQ allocation from PIRQ binding to IRQIan Campbell3-59/+43
Split the binding aspect of xen_allocate_pirq_msi out into a new xen_bind_pirq_to_irq function. In xen_hvm_setup_msi_irq when allocating a pirq write the MSI message to signal the PIRQ as soon as the pirq is obtained. There is no way to free the pirq back so if the subsequent binding to an IRQ fails we want to ensure that we will reuse the PIRQ next time rather than leak it. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: assume PHYSDEVOP_get_free_pirq existsIan Campbell1-9/+6
The find_unbound_pirq is called only from xen_allocate_pirq_msi and only if alloc_pirq is true. The only caller which does this is xen_hvm_setup_msi_irqs. The use of this function is gated, in pci_xen_hvm_init, on XENFEAT_hvm_pirqs. The PHYSDEVOP_get_free_pirq interfaces was added to the hypervisor in 22410:be96f6058c05 while XENFEAT_hvm_pirqs was added a couple of minutes prior in 22409:6663214f06ac. Therefore we do not need to concern ourselves with hypervisors which support XENFEAT_hvm_pirqs but not PHYSDEVOP_get_free_pirq. This eliminates the fallback path in find_unbound_pirq which walks to pirq_to_irq array looking for a free pirq. Unlike the PHYSDEVOP_get_free_pirq interface this fallback only looks up a free pirq but does not reserve it. Removing this fallback will simplify locking in the future. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: pci: collapse apic_register_gsi_xen_hvm and xen_hvm_register_pirqIan Campbell1-8/+3
apic_register_gsi_xen_hvm is a tiny wrapper around xen_hvm_register_pirq. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: return irq from xen_allocate_pirq_msiIan Campbell3-15/+18
consistent with other similar functions. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: drop XEN_ALLOC_IRQ flag to xen_allocate_pirq_msiIan Campbell3-14/+9
All callers pass this flag so it is pointless. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: events: do not leak IRQ from xen_allocate_pirq_msi when no pirq available.Ian Campbell1-1/+4
Cc: Jeremy Fitzhardinge <[email protected]> Cc: [email protected] Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10xen: pci: only define xen_initdom_setup_msi_irqs if CONFIG_XEN_DOM0Ian Campbell1-0/+2
Fixes: CC arch/x86/pci/xen.o arch/x86/pci/xen.c:183: warning: 'xen_initdom_setup_msi_irqs' defined but not used Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-10Merge branch 'stable/pcifront-fixes' into stable/irq.cleanupKonrad Rzeszutek Wilk3-19/+33
* stable/pcifront-fixes: pci/xen: When free-ing MSI-X/MSI irq->desc also use generic code. pci/xen: Cleanup: convert int** to int[] pci/xen: Use xen_allocate_pirq_msi instead of xen_allocate_pirq xen-pcifront: Sanity check the MSI/MSI-X values xen-pcifront: don't use flush_scheduled_work()
2011-03-10Merge branch 'stable/irq.rework' into stable/irq.cleanupKonrad Rzeszutek Wilk6-168/+153
* stable/irq.rework: xen/irq: Cleanup up the pirq_to_irq for DomU PV PCI passthrough guests as well. xen: Use IRQF_FORCE_RESUME xen/timer: Missing IRQF_NO_SUSPEND in timer code broke suspend. xen: Fix compile error introduced by "switch to new irq_chip functions" xen: Switch to new irq_chip functions xen: Remove stale irq_chip.end xen: events: do not free legacy IRQs xen: events: allocate GSIs and dynamic IRQs from separate IRQ ranges. xen: events: add xen_allocate_irq_{dynamic, gsi} and xen_free_irq xen:events: move find_unbound_irq inside CONFIG_PCI_MSI xen: handled remapped IRQs when enabling a pcifront PCI device. genirq: Add IRQF_FORCE_RESUME
2011-03-03xen/irq: Cleanup up the pirq_to_irq for DomU PV PCI passthrough guests as well.Konrad Rzeszutek Wilk1-1/+2
We only did this for PV guests that are xen_initial_domain() but there is not reason not to do this for other cases. The other case is only exercised when you pass in a PCI device to a PV guest _and_ the device in question. Reviewed-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-03xen: Use IRQF_FORCE_RESUMEThomas Gleixner1-19/+1
Mark the IRQF_NO_SUSPEND interrupts IRQF_FORCE_RESUME and remove the extra walk through the interrupt descriptors. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-03Merge branch 'irq/for-xen' of ↵Konrad Rzeszutek Wilk3-5/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip into HEAD * 'irq/for-xen' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Add IRQF_FORCE_RESUME
2011-03-03xen/timer: Missing IRQF_NO_SUSPEND in timer code broke suspend.Ian Campbell1-1/+3
The patches missed an indirect use of IRQF_NO_SUSPEND pulled in via IRQF_TIMER. The following patch fixes the issue. With this fixlet PV guest migration works just fine. I also booted the entire series as a dom0 kernel and it appeared fine. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-03xen: Fix compile error introduced by "switch to new irq_chip functions"Ian Campbell1-1/+1
drivers/xen/events.c: In function 'ack_pirq': drivers/xen/events.c:568: error: implicit declaration of function 'irq_move_irq' Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-03xen: Switch to new irq_chip functionsThomas Gleixner1-44/+51
Convert Xen to the new irq_chip functions. Brings us closer to enable CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-03xen: Remove stale irq_chip.endThomas Gleixner1-18/+0
irq_chip.end got obsolete with the removal of __do_IRQ() Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-03xen: events: do not free legacy IRQsIan Campbell1-0/+4
c514d00c8057 "xen: events: add xen_allocate_irq_{dynamic, gsi} and xen_free_irq" correctly avoids reallocating legacy IRQs (which are managed by the arch core) but erroneously did not prevent them being freed. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-03xen: events: allocate GSIs and dynamic IRQs from separate IRQ ranges.Ian Campbell1-50/+27
There are three cases which we need to care about, PV guest, PV domain 0 and HVM guest. The PV guest case is simple since it has no access to ACPI or real APICs and therefore has no GSIs therefore we simply dynamically allocate all IRQs. The potentially interesting case here is PIRQ type event channels associated with passed through PCI devices. However even in this case the guest has no direct interaction with the physical GSI since that happens in the PCI backend. The PV domain 0 and HVM guest cases are actually the same. In domain 0 case the kernel sees the host ACPI and GSIs (although it only sees the APIC indirectly via the hypervisor) and in the HVM guest case it sees the virtualised ACPI and emulated APICs. In these cases we start allocating dynamic IRQs at nr_irqs_gsi so that they cannot clash with any GSI. Currently xen_allocate_irq_dynamic starts at nr_irqs and works backwards looking for a free IRQ in order to (try and) avoid clashing with GSIs used in domain 0 and in HVM guests. This change avoids that although we retain the behaviour of allowing dynamic IRQs to encroach on the GSI range if no suitable IRQs are available since a future IRQ clash is deemed preferable to failure right now. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]> Cc: Stefano Stabellini <[email protected]> Cc: Jeremy Fitzhardinge <[email protected]>
2011-03-03xen: events: add xen_allocate_irq_{dynamic, gsi} and xen_free_irqIan Campbell1-18/+35
This is neater than open-coded calls to irq_alloc_desc_at and irq_free_desc. No intended behavioural change. Note that we previously were not checking the return value of irq_alloc_desc_at which would be failing for GSI<NR_IRQS_LEGACY because the core architecture code has already allocated those for us. Hence the additional check against NR_IRQS_LEGACY in xen_allocate_irq_gsi. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]> Cc: Stefano Stabellini <[email protected]> Cc: Jeremy Fitzhardinge <[email protected]>
2011-03-03xen:events: move find_unbound_irq inside CONFIG_PCI_MSIIan Campbell1-17/+17
The only caller is xen_allocate_pirq_msi which is also under this ifdef so this fixes: drivers/xen/events.c:377: warning: 'find_unbound_pirq' defined but not used when CONFIG_PCI_MSI=n Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]> Cc: Stefano Stabellini <[email protected]> Cc: Jeremy Fitzhardinge <[email protected]>
2011-03-03xen: handled remapped IRQs when enabling a pcifront PCI device.Ian Campbell1-8/+14
This happens to not be an issue currently because we take pains to try to ensure that the GSI-IRQ mapping is 1-1 in a PV guest and that regular event channels do not clash. However a subsequent patch is going to break this 1-1 mapping. Signed-off-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]> Cc: Stefano Stabellini <[email protected]> Cc: Jeremy Fitzhardinge <[email protected]>
2011-02-21Linux 2.6.38-rc6Linus Torvalds1-1/+1
2011-02-21Merge branch 'for-linus' of ↵Linus Torvalds4-120/+44
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Copy up lower inode attrs in getattr ecryptfs: read on a directory should return EISDIR if not supported eCryptfs: Handle NULL nameidata pointers eCryptfs: Revert "dont call lookup_one_len to avoid NULL nameidata"
2011-02-21drm/i915: Do not handle backlight combination mode speciallyIndan Zupancic2-47/+0
The current code does not follow Intel documentation: It misses some things and does other, undocumented things. This causes wrong backlight values in certain conditions. Instead of adding tricky code handling badly documented and rare corner cases, don't handle combination mode specially at all. This way PCI_LBPC is never touched and weird things shouldn't happen. If combination mode is enabled, then the only downside is that changing the brightness has a greater granularity (the LBPC value), but LBPC is at most 254 and the maximum is in the thousands, so this is no real functional loss. A potential problem with not handling combined mode is that a brightness of max * PCI_LBPC is not bright enough. However, this is very unlikely because from the documentation LBPC seems to act as a scaling factor and doesn't look like it's supposed to be changed after boot. The value at boot should always result in a bright enough screen. IMPORTANT: However, although usually the above is true, it may not be when people ran an older (2.6.37) kernel which messed up the LBPC register, and they are unlucky enough to have a BIOS that saves and restores the LBPC value. Then a good kernel may seem to not work: Max brightness isn't bright enough. If this happens people should boot back into the old kernel, set brightness to the maximum, and then reboot. After that everything should be fine. For more information see the below links. This fixes bugs: http://bugzilla.kernel.org/show_bug.cgi?id=23472 http://bugzilla.kernel.org/show_bug.cgi?id=25072 Signed-off-by: Indan Zupancic <[email protected]> Tested-by: Alex Riesen <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-02-21module: explicitly align module_version_attribute structureDmitry Torokhov1-1/+1
We force particular alignment when we generate attribute structures when generation MODULE_VERSION() data and we need to make sure that this alignment is followed when we iterate over these structures, otherwise we may crash on platforms whose natural alignment is not sizeof(void *), such as m68k. Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]> [ There are more issues here, but the fixes are incredibly ugly - Linus ] Signed-off-by: Linus Torvalds <[email protected]>
2011-02-21Merge branch 'for_linus' of ↵Linus Torvalds7-103/+61
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: dell-laptop: Toggle the unsupported hardware killswitch thinkpad_acpi: Always report scancodes for hotkeys acer-wmi: Fix capitalisation of GUID platform/x86: ideapad-laptop depends on INPUT platform: x86: acer-wmi: world-writable sysfs threeg file platform: x86: asus_acpi: world-writable procfs files platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files platform-drivers: x86: pmic: Use request_irq instead of chained handler platform-drivers: x86: pmic: Use irq_chip buslock mechanism platform-drivers: x86: Convert pmic to new irq_chip functions platform-drivers: x86: pmic: Fix up bogus irq hackery
2011-02-21Merge branch 'rc-fixes' of ↵Linus Torvalds1-1/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: fixdep: Do not record dependency on the source file itself
2011-02-21Docbook: add fs/eventfd.c and fix typos in itRandy Dunlap2-6/+11
Add fs/eventfd.c to filesystems docbook. Make typo corrections in fs/eventfd.c. Signed-off-by: Randy Dunlap <[email protected]> Cc: Davide Libenzi <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-02-21Documentation: log_buf_len uses [KMG] suffixRandy Dunlap1-4/+3
Update the "log_buf_len" description to use [KMG] syntax for the buffer size. Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-02-21Documentation: explain [KMG] parameter suffixAhmed S. Darwish1-0/+5
The '[KMG]' suffix is commonly described after a number of kernel parameter values documentation. Explicitly state its semantics. Signed-off-by: Ahmed S. Darwish <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-02-21Documentation: complete crashkernel= parameter documentationAhmed S. Darwish1-4/+8
Complete the crashkernel= kernel parameter documentation. Signed-off-by: Ahmed S. Darwish <[email protected]> Acked-by: Simon Horman <[email protected]> Acked-by: Vivek Goyal <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-02-21Merge branch 'for-linus' of ↵Linus Torvalds4-36/+46
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: keep reference to parent inode on ceph_dentry ceph: queue cap_snaps once per realm libceph: fix socket write error handling libceph: fix socket read error handling
2011-02-21Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds9-363/+342
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV210: Fix regulator names ARM: S5PV210: Update max8998_platform_data ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata ARM: S5P: Fix end address in memory resource information for UART devices ARM: S5P64X0: Cleanup map.h file ARM: S5P6442: Cleanup map.h file ARM: S5PC100: Clenaup map.h file ARM: S5PV210: Cleanup map.h file ARM: S5PV310: Cleanup map.h file
2011-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds3-9/+9
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] update cifs version cifs: Fix regression in LANMAN (LM) auth code cifs: fix handling of scopeid in cifs_convert_address
2011-02-21Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds17-37/+175
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6745/1: kprobes insn decoding fix ARM: tlb: move noMMU tlb_flush() to asm/tlb.h ARM: tlb: delay page freeing for SMP and ARMv7 CPUs ARM: Keep exit text/data around for SMP_ON_UP ARM: Ensure predictable endian state on signal handler entry ARM: 6740/1: Place correctly notes section in the linker script ARM: 6700/1: SPEAr: Correct SOC config base address for spear320 ARM: 6722/1: SPEAr: sp810: switch to slow mode before reset ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in uncompress.h ARM: 6720/1: SPEAr: Append UL to VMALLOC_END ARM: 6676/1: Correct the cpu_architecture() function for ARMv7 ARM: 6739/1: update .gitignore for boot/compressed ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of broadcasted operation ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systems ARM: 6741/1: errata: pl310 cache sync operation may be faulty
2011-02-21Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds4-11/+23
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] net: provide architecture specific NET_SKB_PAD [S390] atomic: use inline asm [S390] correct ipl parameter block safe guard [S390] atomic: use ACCESS_ONCE() for atomic_read() [S390] dasd: correct device table
2011-02-21[CIFS] update cifs versionSteve French1-1/+1
Update version to 1.71 so we can more easily spot modules with the last two fixes Signed-off-by: Steve French <[email protected]>
2011-02-21dell-laptop: Toggle the unsupported hardware killswitchKeng-Yu Lin1-2/+22
It is found on Dell Inspiron 1018 that the firmware reports that the hardware killswitch is not supported. This makes the rfkill key not functional. This patch forces the driver to toggle the firmware rfkill status in the case that the hardware killswitch is indicated as unsupported by the firmware. Signed-off-by: Keng-Yu Lin <[email protected]> Tested-by: Alessio Igor Bogani <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-02-21thinkpad_acpi: Always report scancodes for hotkeysSeth Forshee1-6/+2
Some thinkpad hotkeys report key codes like KEY_FN_F8 when something like KEY_VOLUMEDOWN is desired. Always provide the scan codes in addition to the key codes to assist with debugging these issues. Also send the scan code before the key code to match what other drivers do, as some userspace utilities expect this ordering. Signed-off-by: Seth Forshee <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-02-21acer-wmi: Fix capitalisation of GUIDMatthew Garrett1-1/+1
6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3 needs to be 6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3 to match the hardware alias. Signed-off-by: Matthew Garrett <[email protected]> Acked-by: Carlos Corbacho <[email protected]> Cc: [email protected]
Powered by cgit, Gruvboxed by Blaster4385.