aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-11-03[media] V4L: ov2640: remove undefined structGuennadi Liakhovetski1-3/+0
struct ov2640_camera_info isn't declared anywhere, remove it. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: mx2_camera: convert to the new mbus-config subdev operationsGuennadi Liakhovetski1-33/+45
Switch from soc-camera specific .{query,set}_bus_param() to V4L2 subdevice .[gs]_mbus_config() operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: mx1_camera: convert to the new mbus-config subdev operationsGuennadi Liakhovetski1-29/+42
Switch from soc-camera specific .{query,set}_bus_param() to V4L2 subdevice .[gs]_mbus_config() operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: atmel-isi: convert to the new mbus-config subdev operationsGuennadi Liakhovetski1-63/+73
Switch from soc-camera specific .{query,set}_bus_param() to V4L2 subdevice .[gs]_mbus_config() operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] ARM: PXA: use gpio_set_value_cansleep() on pcm990Guennadi Liakhovetski1-2/+2
Camera-switching GPIOs are provided by a i2c GPIO extender, switching them can send the caller to sleep. Use the GPIO API *_cansleep methods explicitly to avoid runtime warnings. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] sh: convert ap325rxa to mediabus flagsGuennadi Liakhovetski1-0/+4
Prepare the board to switch to the new subdevice media-bus configuration operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Acked-by: Magnus Damm <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] ARM: mach-shmobile: convert mackerel to mediabus flagsGuennadi Liakhovetski1-0/+4
Prepare the board to switch to the new subdevice media-bus configuration operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Acked-by: Magnus Damm <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: soc-camera: compatible bus-width flagsGuennadi Liakhovetski1-6/+6
With the new subdevice media-bus configuration methods bus-width is not configured along with other bus parameters, instead, it is derived from the data format. With those methods it is convenient to specify supported bus-widths in the platform data as (1 << (width - 1)). We redefine SOCAM_DATAWIDTH_* flags to use the same convention to make platform data seemlessly reusable. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: soc_camera_platform: support the new mbus-config subdev opsGuennadi Liakhovetski2-0/+15
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: tw9910: support the new mbus-config subdev opsGuennadi Liakhovetski1-2/+47
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: tw9910: remove a not really implemented cropping supportGuennadi Liakhovetski1-83/+46
Cropping is not really correctly implemented by this driver and only needlessly obfuscates the code. Remove it. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: sh_mobile_csi2: support the new mbus-config subdev opsGuennadi Liakhovetski1-0/+27
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: sh_mobile_csi2: verify client compatibilityGuennadi Liakhovetski1-6/+52
Switch the meaning of the .lanes platform data parameter to specify the number of used lanes instead of a bitmask. Verify bus configuration compatibility with client's capabilities. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] ARM: ap4evb: switch imx074 configuration to default number of lanesGuennadi Liakhovetski1-1/+1
The sh_mobile_csi2 driver will change meaning of the .lanes platform data field from "bitmask of used lanes" to "number of used lanes." To avoid a regression during this transition switch ap4evb to rely on the 2 lane default. Signed-off-by: Guennadi Liakhovetski <[email protected]> Acked-by: Magnus Damm <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: rj54n1cb0c: support the new mbus-config subdev opsGuennadi Liakhovetski1-0/+34
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: ov9740: support the new mbus-config subdev opsGuennadi Liakhovetski1-7/+26
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: ov9640: support the new mbus-config subdev opsGuennadi Liakhovetski1-2/+20
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: ov772x: support the new mbus-config subdev opsGuennadi Liakhovetski1-3/+21
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: ov772x: rename macros to not pollute the global namespaceGuennadi Liakhovetski2-17/+16
Macros, defined in a header under include/ should be kept in a local namespace and not pollute the global one. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: ov6650: support the new mbus-config subdev opsGuennadi Liakhovetski1-1/+52
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: ov5642: support the new mbus-config subdev opsGuennadi Liakhovetski1-0/+12
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: ov2640: support the new mbus-config subdev opsGuennadi Liakhovetski1-2/+20
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: mt9v022: support the new mbus-config subdev opsGuennadi Liakhovetski1-1/+75
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: mt9t112: support the new mbus-config subdev opsGuennadi Liakhovetski1-39/+42
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: mt9t031: support the new mbus-config subdev opsGuennadi Liakhovetski1-0/+33
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: mt9m111: support the new mbus-config subdev opsGuennadi Liakhovetski1-1/+19
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: mt9m001: support the new mbus-config subdev opsGuennadi Liakhovetski1-1/+39
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: soc-camera: add helper functions for new bus configuration typeGuennadi Liakhovetski4-2/+73
Add helper functions to process the new media bus configuration type similar to soc_camera_apply_sensor_flags() and soc_camera_bus_param_compatible(). Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: imx074: support the new mbus-config subdev opsGuennadi Liakhovetski1-0/+12
Extend the driver to also support [gs]_mbus_config() subdevice video operations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: sh_mobile_ceu_camera: remove duplicated codeGuennadi Liakhovetski1-3/+0
Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: sh_mobile_ceu_camera: fix field addresses in interleaved modeGuennadi Liakhovetski1-6/+19
In interlaced interleaved mode field offset for deinterlacing depends on the pixel format. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: sh_mobile_ceu_camera: don't try to improve client scaling, if ↵Guennadi Liakhovetski1-5/+16
perfect If the client has managed to configure the precise output format, we don't have to try to further improve it. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03[media] V4L: sh_mobile_ceu_camera: output image sizes must be a multiple of 4Guennadi Liakhovetski1-18/+31
CEU can only produce images with 4 pixel aligned width and height. Enforce this alignment, adjust comments and simplify some calculations. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-11-03edac: Only build sb_edac on 64-bitJosh Boyer1-1/+1
The sb_edac driver is marginally useful on a 32-bit kernel, and currently has 64-bit divide compile errors when building that config. For now, make this build on only for 64-bit kernels. Signed-off-by: Josh Boyer <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-11-03powerpc/p3060qds: Add support for P3060QDS boardShengzhou Liu6-0/+1048
The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC. The P3060 Processor combines six e500mc Power Architecture processor cores with high-performance datapath acceleration architecture(DPAA), CoreNet fabric infrastructure, as well as network and peripheral interfaces. P3060QDS Board Overview: Memory subsystem: - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus) - 128M Bytes NOR flash single-chip memory - 16M Bytes SPI flash - 8K Bytes AT24C64 I2C EEPROM Ethernet: - 4x1G + 4x1G/2.5G Ethernet controllers - 2xRGMII + 1xMII, three VSC8641 PHYs on board - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3 PCIe: Two PCI Express 2.0 controllers/ports USB: Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board I2C: Four I2C controllers UART: Supports up to four UARTs RapidIO: Supports two serial RapidIO ports Signed-off-by: Shengzhou Liu <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2011-11-03powerpc/83xx: Add shutdown request support to MCU handling on MPC8349 MITXFabio Baltieri2-2/+58
This patch add support for calling ctrl_alt_del() when the power button is pressed for more than about 2 seconds on some freescale MPC83xx evaluation boards and reference design. The code uses a kthread to poll the CTRL_BTN bit each second. Also change Kconfig entry of the driver to bool, as device's gpio registration is broken when loading as module. Tested on an MPC8315E RDB board. Signed-off-by: Fabio Baltieri <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2011-11-03powerpc/85xx: Make kexec to interate over online cpusMatthew McClintock1-1/+1
This is not strictly required, because this iterates over logical cpus and they are not (currently) discontigous. But, it's cleaner code and more obvious what is going on Signed-off-by: Matthew McClintock <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2011-11-03powerpc/fsl_booke: Fix comment in head_fsl_booke.SMatthew McClintock1-2/+2
Fix typo in comments introduced by: commit 6dece0eb69b2a28e18d104bc5d707f1cb673f5e0 Author: Scott Wood <[email protected]> Date: Mon Jul 25 11:29:33 2011 +0000 powerpc/32: Pass device tree address as u64 to machine_init Signed-off-by: Matthew McClintock <[email protected]> cc: Scott Wood <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2011-11-03powerpc/85xx: issue 15 EOI after core reset for FSL CoreNet devicesMatthew McClintock1-0/+10
This is listed as a requirement for Freescale CoreNet based devices (e.g p4080ds with MPIC v4.x) after issuing a core reset to properly clear pending interrupts. Signed-off-by: Matthew McClintock <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2011-11-03powerpc/8xxx: Fix interrupt handling in MPC8xxx GPIO driverFelix Radensky1-0/+2
Interrupt handler in MPC8xxx GPIO driver is missing the call to PIC EOI (end of interrupt) handler. As a result, at least on 85XX systems, GPIO interrupt is delivered only once. This patch adds the missing EOI call. Tested on custom P1022 board. Signed-off-by: Felix Radensky <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2011-11-03powerpc/85xx: Add 'fsl,pq3-gpio' compatiable for GPIO driverKumar Gala1-0/+1
Support MPC85xx platforms outside of MPC8572/MPC8536. The MPC8572/MPC8536 have an erratum that is worked around based on having "fsl,mpc8572-gpio" in the compatiable list. All other MPC85xx SoCs don't require this workaround and thus utilize the 'fsl,pq3-gpio' compatiable. Signed-off-by: Kumar Gala <[email protected]>
2011-11-03powerpc/86xx: Correct Gianfar support for GE boardsMartyn Welch3-12/+87
The GE DTBs were not updated when the Gianfar driver was converted to an of_platform_driver in commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4. Update the DTBs, adding the required TBI entries. Signed-off-by: Martyn Welch <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2011-11-03drm/radeon/kms: don't poll forever if MC GDDR link training failsAlex Deucher1-2/+5
Bail if we hit the timeout limit. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-11-03drm/radeon/kms: fix DP setup on TRAVIS bridgesAlex Deucher1-2/+5
Supposedly both NUTMEG and TRAVIS should use the same panel mode, but switching the panel mode for TRAVIS gets things working. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41569 Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-11-03drm/radeon/kms: set HPD polarity in hpd_init()Alex Deucher5-11/+12
Polarity needs to be set accordingly to connector status (connected or disconnected). Set it up in hpd_init() so first hotplug works reliably no matter what is the initial set of connector. hpd_init() also covers resume so HPD will work correctly after resume as well. Signed-off-by: Alex Deucher <[email protected]> Cc: Jerome Glisse <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-11-03drm/radeon/kms: add MSI module parameterAlex Deucher3-0/+11
Allow the user to override whether MSIs are enabled or not on supported ASICs. MSIs are disabled by default on IGP chips as they tend not to work. However certain IGP chips only seem to work with MSIs enabled. I suspect this is a chipset or bios issue, but I'm not sure what the proper fix is. This will at least make diagnosing and working around the problem much easier. See: https://bugs.freedesktop.org/show_bug.cgi?id=37679 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-11-03drm/radeon/kms: Add MSI quirk for Dell RS690Alex Deucher1-0/+6
Some Dell laptops only seem to work with MSIs. This looks like a platform/bios bug. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=37679 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-11-03drm/radeon/kms: Add MSI quirk for HP RS690Alex Deucher1-0/+7
Some HP laptops only seem to work with MSIs. This looks like a platform/bios bug. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=37679 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-11-03drm/radeon/kms: split MSI check into a separate functionAlex Deucher1-6/+23
This makes it easier to add quirks for certain systems. Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-11-03block: don't call blk_drain_queue() if elevator is not upTejun Heo1-2/+7
blk_cleanup_queue() may be called before elevator is set up on a queue which triggers the following oops. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8125a69c>] elv_drain_elevator+0x1c/0x70 ... Pid: 830, comm: kworker/0:2 Not tainted 3.1.0-next-20111025_64+ #1590 Bochs Bochs RIP: 0010:[<ffffffff8125a69c>] [<ffffffff8125a69c>] elv_drain_elevator+0x1c/0x70 ... Call Trace: [<ffffffff8125da92>] blk_drain_queue+0x42/0x70 [<ffffffff8125db90>] blk_cleanup_queue+0xd0/0x1c0 [<ffffffff81469640>] md_free+0x50/0x70 [<ffffffff8126f43b>] kobject_release+0x8b/0x1d0 [<ffffffff81270d56>] kref_put+0x36/0xa0 [<ffffffff8126f2b7>] kobject_put+0x27/0x60 [<ffffffff814693af>] mddev_delayed_delete+0x2f/0x40 [<ffffffff81083450>] process_one_work+0x100/0x3b0 [<ffffffff8108527f>] worker_thread+0x15f/0x3a0 [<ffffffff81089937>] kthread+0x87/0x90 [<ffffffff81621834>] kernel_thread_helper+0x4/0x10 Fix it by making blk_cleanup_queue() check whether q->elevator is set up before invoking blk_drain_queue. Signed-off-by: Tejun Heo <[email protected]> Reported-and-tested-by: Jiri Slaby <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.