aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-11-05ARM: mach-shmobile: ag5evm needs CONFIG_I2CGuennadi Liakhovetski1-0/+1
ag5evm implements a backlight control, using an I2C controller, therefore it needs CONFIG_I2C to fix this make failure arch/arm/mach-shmobile/built-in.o: In function `lcd_on': pfc-sh73a0.c:(.text+0x2334): undefined reference to `i2c_get_adapter' pfc-sh73a0.c:(.text+0x2370): undefined reference to `i2c_transfer' (ignore pfc-sh73a0.c) and to build successfully. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-05ARM: mach-shmobile: sh73a0 and AG5EVM PINT supportMagnus Damm3-15/+71
Support PINT on sh73a0 and AG5EVM using INTC PINT macros. With this patch applied the AG5EVM ethernet is handled through one of the chained sh73a0 PINT interrupt controllers. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-05ARM: mach-shmobile: Add support for PINT though INTC macrosMagnus Damm1-0/+51
Add a INTC_PINT() macro with various helper bits to allow SoCs like sh73a0 to suppor the PINT hardware using regular INTC tables. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-05ARM: mach-shmobile: SDHI0 GPIO hotplug for AG5EVMMagnus Damm1-0/+19
Implement GPIO hotplugging via TMIO_MMC_HAS_COLD_CD for AG5EVM SDHI0. This is possible now when INTCA is used for IRQ triggering on sh73a0. Without INTCA IRQ support we are left with the GIC hardware block that does not support dealing with active low interrupt sources. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-05ARM: mach-shmobile: Use common INTC IRQ code on sh73a0Magnus Damm2-33/+157
Improve IRQ triggering support by making use of the macro INTC_IRQ_PINS_32() for INTCA on sh73a0. Unfortunately it is not as easy as just using the macro as-is, we need to do mask and unmaks in the GIC but configure other bits and ack in INTCA. Update GPIO IRQ mappings while at it. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-05ARM: mach-shmobile: Use common INTC IRQ code on sh7372Magnus Damm1-64/+8
Make use of INTC_IRQ_PINS_32() for INTCA on sh7372. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-05ARM: mach-shmobile: Use common INTC IRQ code on sh7377Magnus Damm1-61/+6
Make use of INTC_IRQ_PINS_32() for INTCA on sh7377. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-05ARM: mach-shmobile: Use common INTC IRQ code on sh7367Magnus Damm1-34/+6
Make use of INTC_IRQ_PINS_16() for INTCA on sh7367. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-05ARM: mach-shmobile: sh73a0 GPIO IRQ supportMagnus Damm1-0/+41
This patch adds support for sh73a0 GPIO IRQs by making use of the PFC GPIO IRQ feature. Only IRQ pins are supported at this time. In the future when PINT interrupts also are supported properly we can easily extend the table with such information. Also, the sh73a0 is currently making use of the GIC for external interrupt which is rather unflexible when it comes to triggering configuration at this point. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-05ARM: sh7372 ap4evb NOR Flash USB boot fixBastian Hecht1-2/+2
Always use CS0 shadow area for NOR flash instead of regular CS0 memory area on ap4evb. When booting from CS0 NOR Flash the regular CS0 memory area is available, but when booting via USB the MASK ROM gets mapped to 0x0 which gets in the way for the NOR Flash. Always using CS0 shadow area works well for both NOR Flash boot and USB boot. Signed-off-by: Bastian Hecht <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-05ARM: mach-shmobile: sh7372 Mackerel NOR Flash USB boot fixMagnus Damm1-2/+2
Always use CS0 shadow area for NOR flash instead of regular CS0 memory area on Mackerel. When booting from CS0 NOR Flash the regular CS0 memory area is available, but when booting via USB the MASK ROM gets mapped to 0x0 which gets in the way for the NOR Flash. Always using CS0 shadow area works well for both NOR Flash boot and USB boot. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-05sh: intc: Allow triggering on both edges for ARM SoCsMagnus Damm1-1/+1
Enable IRQ_TYPE_EDGE_BOTH on all R/SH-Mobile ARM SoCs. This hardware feature is supported by sh7367, sh7377, sh7372 and sh73a0. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-05ARM: mach-shmobile: Break out INTC IRQ codeMagnus Damm1-0/+195
Add INTC_IRQ_PINS_16() and INTC_IRQ_PINS_32() to mach/intc.h. These macros define 16 or 32 external IRQ pins on a certain memory base address. Can be used with INTCA or INTCS. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-11-04Merge branch 'v4l_for_linus' of ↵Linus Torvalds216-3785/+10316
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (144 commits) [media] saa7134.h: Suppress compiler warnings when CONFIG_VIDEO_SAA7134_RC is not set [media] it913x [VER 1.07] Support for single ITE 9135 devices [media] Support for Terratec G1 [media] cx25821: off by one in cx25821_vidioc_s_input() [media] media: tea5764: reconcile Kconfig symbol and macro [media] omap_vout: Add poll() support [media] omap3isp: preview: Add crop support on the sink pad [media] omap3isp: preview: Rename min/max input/output sizes defines [media] omap3isp: preview: Remove horizontal averager support [media] omap3isp: Report the ISP revision through the media controller API [media] omap3isp: ccdc: remove redundant operation [media] omap3isp: Fix memory leaks in initialization error paths [media] omap3isp: Add missing mutex_destroy() calls [media] omap3isp: Move *_init_entities() functions to the init/cleanup section [media] omap3isp: Move media_entity_cleanup() from unregister() to cleanup() [media] MFC: Change MFC firmware binary name [media] vb2: add vb2_get_unmapped_area in vb2 core [media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor [media] v4l: Add AUTO option for the V4L2_CID_POWER_LINE_FREQUENCY control [media] media: ov6650: stylistic improvements ...
2011-11-04Merge branch 'hwmon-for-linus' of ↵Linus Torvalds25-409/+439
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (w83627ehf) Add support for the W83627UHG hwmon: (w83627ehf) Clean up probe function hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor types hwmon: Use i2c_smbus_{read,write}_word_swapped hwmon: (smsc47b397) Fix checkpatch errors hwmon: (lm90) Make code more readable hwmon: (lm90) Fix warnings hwmon: (ibmaem) Avoid repeated memory allocations hwmon: (ibmaem) Make instance initializations independent hwmon: (ibmaem) Fix error paths hwmon: (lm73) Make detection less problematic hwmon: Avoid building drivers for powerpc that read/write ISA addresses
2011-11-04Merge branch 'for-linus' of ↵Linus Torvalds17-95/+145
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits) ALSA: hda/realtek - Skip invalid digital out pins ALSA: hda/sigmatel - Automatically retrieve digital I/O widgets ALSA: hda - Remove unused variables ALSA: hda/realtek - Don't create alt-stream for capture when unnecessary ALSA: hda - Add support for 92HD65 / 92HD66 family of codecs ALSA: hda - Disable power-widget control for IDT 92HD83/93 as default ALSA: hda - Check NO_PRESENCE pincfg default bit ASoC: Ensure we always delay for WM8962 FLL when starting from SYSCLK ASoC: Ensure the WM8962 oscillator and PLLs start up disabled ASoC: Ensure WM8962 PLL registers are reset ALSA: intel8x0 - Fix inclusion of kvm_para.h ALSA: hda_hwdep: Fix possible buffer overflow ASoC: Fix return value of wm5100_gpio_direction_out() ASoC: WM8904: Set `invert' bit for Capture Switch ASoC: Leave input audio data bit length settings untouched in wm8711_set_dai_fmt ASoC: wm8711: Fix wrong mask for setting input audio data bit length select ALSA: intel8x0: Improve performance in virtual environment ALSA: hdspm - Enable all firmware ranges for PCI MADI/AES cards ALSA: hdsp - Correct HDSP_VERSION_BIT constant, thus partly fixing RPM detection ALSA: hdspm - Fix MADI channel format in the status ioctl ...
2011-11-04Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds4-12/+50
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: dt: add empty of_machine_is_compatible ahci: add DT binding for Calxeda AHCI controller dt/platform: minor cleanup dt: add empty of_alias_get_id() for non-dt builds
2011-11-04Merge branch 'rmobile/kota2' into rmobile-latestPaul Mundt4-4/+461
2011-11-04Merge branch 'master' of ↵Paul Mundt8762-343540/+537884
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into rmobile-latest
2011-11-04nfs: set vs_hidden on nfs4_callback_version4 (try #2)Jeff Layton1-0/+1
This service should not be registered with or unregistered from rpcbind. Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2011-11-04hwmon: (w83627ehf) Add support for the W83627UHGJean Delvare3-41/+140
This is essentially a stripped down version of the W83627DHG. Noticeable difference is that it is still powered with +5V, as older models, even though the ADC resolution is 8 mV as newer models have. Thanks to Ulf Bruman (Saab Group) for doing all the testing. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2011-11-04hwmon: (w83627ehf) Clean up probe functionJean Delvare1-21/+32
The probe function has grown pretty large, I think it's time for some cleanups, starting with these two simple ones: * Move temp3/in6 check for the W83667HG later in the function, where it is done for all other chip types. * Move temperature register setting to a separate function, to avoid code duplication. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2011-11-04hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor typesJean Delvare1-1/+8
When temperature sources are PECI or AMD-SI agents, it makes no sense to report their type as diode or thermistor. Instead we must report their digital nature. Signed-off-by: Jean Delvare <[email protected]> Cc: [email protected] Acked-by: Guenter Roeck <[email protected]>
2011-11-04hwmon: Use i2c_smbus_{read,write}_word_swappedJean Delvare19-234/+115
Make use of the new i2c_smbus_{read,write}_word_swapped functions. This makes the driver code more compact and readable. It also ensures proper error handling. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Acked-by: Guenter Roeck <[email protected]> Cc: Dirk Eibach <[email protected]> Cc: "Mark M. Hoffman" <[email protected]> Cc: Guillaume Ligneul <[email protected]>
2011-11-04hwmon: (smsc47b397) Fix checkpatch errorsJean Delvare1-5/+8
Signed-off-by: Jean Delvare <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2011-11-04hwmon: (lm90) Make code more readableJean Delvare1-74/+69
Clean up the code to make it more readable: * Remove reg_ and new_ prefixes from variable names, they made the names longer, causing extra line breaks, while not adding much value. * Introduce struct device dev* = &client->dev in two functions, to avoid repeating client->dev everywhere in these functions. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2011-11-04hwmon: (lm90) Fix warningsJean Delvare1-15/+16
With some configuration option combinations, we get the following warnings: drivers/hwmon/lm90.c: In function 'lm90_detect': drivers/hwmon/lm90.c:1114: warning: 'chip_id' may be used uninitialized in this function drivers/hwmon/lm90.c:1114: warning: 'reg_config1' may be used uninitialized in this function drivers/hwmon/lm90.c:1114: warning: 'reg_convrate' may be used uninitialized in this function drivers/hwmon/lm90.c:1187: warning: 'reg_emerg2' may be used uninitialized in this function drivers/hwmon/lm90.c:1187: warning: 'reg_status2' may be used uninitialized in this function We can solve these easily by reading the register values first and checking for errors later. These errors should be very rare, even in the case of failed detection, so this change has no impact on performance. And this makes checkpatch.pl happier. Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Jean Delvare <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2011-11-04hwmon: (ibmaem) Avoid repeated memory allocationsJean Delvare1-8/+20
Preallocate a buffer for the response to sensor reads, and reuse it for each read instead of allocating a new one each time. This should be faster and should also avoid memory fragmentation. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Darrick J. Wong <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2011-11-04hwmon: (ibmaem) Make instance initializations independentJean Delvare1-10/+2
There is no good reason that I can see why the failure to initialize one instance should prevent other instances from being initialized. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Darrick J. Wong <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2011-11-04hwmon: (ibmaem) Fix error pathsJean Delvare1-8/+12
I am under the impression that error paths in functions aem_init_aem1_inst() and aem_init_aem2_inst() are incorrect. In several cases, the function returns 0 on error, which I suspect is not intended. Fix this by properly tracking error codes. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Darrick J. Wong <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2011-11-04hwmon: (lm73) Make detection less problematicJean Delvare1-4/+18
Word reads can cause trouble with some I2C devices, so do as much detection as we can using only byte reads, and only use a word read in the end to confirm the positive match. Also properly handle read errors. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Guenter Roeck <[email protected]> Cc: Robert Casanova <[email protected]>
2011-11-04hwmon: Avoid building drivers for powerpc that read/write ISA addressesDean Nelson1-2/+13
A modprobe of hwmon drivers that read/write ISA addresses on a powerpc results in a kernel Oops. These reads/writes are being done via the inb()/in_8() and outb()/out_8() macros. Prevent these drivers from being built for powerpc. Signed-off-by: Dean Nelson <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
2011-11-04target: use ->exectute_task for all CDB emulationChristoph Hellwig3-140/+97
Instead of calling into transport_emulate_control_cdb from __transport_execute_tasks for some CDBs always set up ->exectute_tasks in the command sequence and use it uniformly. (nab: Add default passthrough break for SERVICE_ACTION_IN) Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]>
2011-11-04target: remove SCF_EMULATE_CDB_ASYNCChristoph Hellwig6-100/+142
All ->execute_task instances now need to complete the I/O explicitly, which can either happen synchronously or asynchronously. Note that a lot of the CDB emulations appear to return success even if some lowlevel operations failed. Given that this is an existing issue this patch doesn't change that fact. (nab: Adding missing switch breaks in PR-IN + PR_OUT) Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]>
2011-11-04drm/radeon/kms: consolidate GART code, fix segfault after GPU lockup V2Jerome Glisse10-116/+75
After GPU lockup VRAM gart table is unpinned and thus its pointer becomes unvalid. This patch move the unpin code to a common helper function and set pointer to NULL so that page update code can check if it should update GPU page table or not. That way bo still bound to GART can be unbound (pci_unmap_page for all there page) properly while there is no need to update the GPU page table. V2 move the test for null gart out of the loop, small optimization Signed-off-by: Jerome Glisse <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-11-04target: refactor transport_emulate_control_cdbChristoph Hellwig1-46/+59
Encapsulate each CDB emulation into a function of its own, to prepare setting ->exectute_task to these routines. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]>
2011-11-04target: pass the se_task to the CDB emulation callbackChristoph Hellwig8-55/+42
We want to be able to handle all CDBs through it and remove hacks like always using the first task in a CDB in target_report_luns. Also rename the callback to ->execute_task to better describe its use. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]>
2011-11-04target: split core_scsi3_emulate_prChristoph Hellwig3-32/+45
Split core_scsi2_emulate_crh into one routine each for the PERSISTENT_RESERVE_IN and PERSISTENT_RESERVE_OUT side. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]>
2011-11-04target: split core_scsi2_emulate_crhChristoph Hellwig3-106/+102
Split core_scsi2_emulate_crh into one routine each for the reserve and release side. The common code now is in a helper called by both routines. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Nicholas Bellinger <[email protected]>
2011-11-04target: Add generic active I/O shutdown logicNicholas Bellinger4-6/+145
This patch adds the initial pieces of generic active I/O shutdown logic. This is intended to be a 'opt-in' feature for fabric modules that includes the following functions to provide a mechinism for fabric modules to track se_cmd via se_session->sess_cmd_list: *) target_get_sess_cmd() - Add se_cmd to sess->sess_cmd_list, called from fabric module incoming I/O path. *) target_put_sess_cmd() - Check for completion or drop se_cmd from ->sess_cmd_list *) target_splice_sess_cmd_list() - Splice active I/O list from ->sess_cmd_list to ->sess_wait_list, can called with HW fabric lock held. *) target_wait_for_sess_cmds() - Walk ->sess_wait_list waiting on individual ->cmd_wait_comp. Optional transport_wait_for_tasks() call. target_splice_sess_cmd_list() is allowed to be called under HW fabric lock, and performs the splice into se_sess->sess_wait_list and set se_cmd->cmd_wait_set. Then target_wait_for_sess_cmds() walks the list waiting for individual target_put_sess_cmd() fabric callbacks to complete. It also adds TFO->check_release_cmd() to split the completion and memory release calls, where a fabric module uses target_put_sess_cmd() to check for I/O completion during session shutdown. This is currently pushed out into fabric modules as current fabric code may sleep here waiting for TFO->check_stop_free() to complete in main response path, and because target_wait_for_sess_cmds() calling TFO->release_cmd() to free fabric descriptor memory directly. Cc: Christoph Hellwig <[email protected]> Cc: Roland Dreier <[email protected]> Signed-off-by: Nicholas A. Bellinger <[email protected]>
2011-11-04CIFS: Cleanup byte-range locking code stylePavel Shilovsky1-24/+19
Reorder parms of cifs_lock_init, trivially simplify getlk code and remove extra {} in cifs_lock_add_if. Cc: Dan Carpenter <[email protected]> Acked-by: Jeff Layton <[email protected]> Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2011-11-04CIFS: Simplify setlk error handling for mandatory lockingPavel Shilovsky1-32/+32
Now we allocate a lock structure at first, then we request to the server and save the lock if server returned OK though void function - it prevents the situation when we locked a file on the server and then return -ENOMEM from setlk. Signed-off-by: Pavel Shilovsky <[email protected]> Acked-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2011-11-04dt: add empty of_machine_is_compatibleStephen Warren1-0/+5
The patch adds an empty function for non-dt build, so that drivers migrating to dt can save some '#ifdef CONFIG_OF'. v3: New patch Signed-off-by: Stephen Warren <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-11-03Merge git://git.samba.org/sfrench/cifs-2.6Linus Torvalds7-64/+32
* git://git.samba.org/sfrench/cifs-2.6: cifs: Assume passwords are encoded according to iocharset (try #2) CIFS: Fix the VFS brlock cache usage in posix locking case [CIFS] Update cifs version to 1.76 CIFS: Remove extra mutex_unlock in cifs_lock_add_if
2011-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds77-421/+505
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits) be2net: Add detect UE feature for Lancer be2net: Prevent CQ full condition for Lancer be2net: Fix disabling multicast promiscous mode be2net: Fix endian issue in RX filter command af_packet: de-inline some helper functions MAINTAINERS: Add can-gw include to maintained files net: Add back alignment for size for __alloc_skb net: add missing bh_unlock_sock() calls l2tp: fix race in l2tp_recv_dequeue() ixgbevf: Update release version ixgbe: DCB, return max for IEEE traffic classes ixgbe: fix reading of the buffer returned by the firmware ixgbe: Fix compiler warnings ixgbe: fix smatch splat due to missing NULL check ixgbe: fix disabling of Tx laser at probe ixgbe: Fix link issues caused by a reset while interface is down igb: Fix for I347AT4 PHY cable length unit detection e100: make sure vlan support isn't advertised on old adapters e1000e: demote a debugging WARN to a debug log message net: fix typo in drivers/net/ethernet/xilinx/ll_temac_main.c ...
2011-11-03Merge branch 'for-grant' of git://sources.calxeda.com/kernel/linux into ↵Grant Likely2020-37800/+100335
devicetree/merge
2011-11-03be2net: Add detect UE feature for LancerPadmanabh Ratnakar3-21/+42
Add code to detect UE in case of Lancer. Signed-off-by: Padmanabh Ratnakar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-11-03be2net: Prevent CQ full condition for LancerPadmanabh Ratnakar1-4/+4
Indicate to HW that the CQ is cleaned up before posting new RX buffers. This prevents the HW to go into CQ full error condition. Signed-off-by: Padmanabh Ratnakar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-11-03be2net: Fix disabling multicast promiscous modePadmanabh Ratnakar1-0/+7
If user tries to disable multicast promiscous mode, the adapter remains in this mode as resetting the multicast promiscous mode was missing in RX filter command. Fixed this. Signed-off-by: Padmanabh Ratnakar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-11-03be2net: Fix endian issue in RX filter commandPadmanabh Ratnakar1-1/+1
Use cpu_to_le32() for mcast_num field in RX filter command as this field is of type u32. Signed-off-by: Padmanabh Ratnakar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.