Age | Commit message (Collapse) | Author | Files | Lines |
|
Signed-off-by: Aric Cyr <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Anthony Koo <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Some MST devices uses different method to enable mst
specific stream features.
[How]
Add dm_helpers_mst_enable_stream features. This can be
modified later when we are ready to implement those features.
Signed-off-by: Bing Guo <[email protected]>
Reviewed-by: Anthony Koo <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why?]
When a monitor does not set both QS and QY bits, DC does not
set Q0, Q1, QY0 and QY1 bits in AVI infoframe. Setting RGB bits
should be separate from setting YCC bits.
[How?]
Separate logic for setting RGB and YCC quantization range bits
in the AVI infoframe.
Signed-off-by: Dillon Varone <[email protected]>
Reviewed-by: Chris Park <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How?]
Call to dc_dsc_compute_bandwidth_range should have min and max bpp
in 16ths of a bit. Multiply min and max bpp from policy.
Signed-off-by: Dillon Varone <[email protected]>
Reviewed-by: Eryk Brol <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[How & Why]
Changed "prsent" to "present".
Signed-off-by: David Galiffi <[email protected]>
Reviewed-by: Chris Park <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Requirement from the spec - we shouldn't be potentially exiting out
early based on encryption status.
[How]
Drop the calls from HDCP1 and HDCP2 execution that exit out early
based on link encryption status.
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Reviewed-by: Wenjing Liu <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why&How]
Add logs to verify ILR optimization behaviour on boot
Signed-off-by: Michael Strauss <[email protected]>
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[WHY]
While Link Training is being performed,
and the LTTPRs are in Non-LTTPR or LTTPR Transparent mode,
any DPCD registers besides those used for Link Training are not to be
accessed.
The spec defines the link training registers as DP_TRAINING_PATTERN_SET
(102h) to DP_TRAINING_LANE3_SET (106h), and DP_LANE0_1_STATUS (202h)
to DP_ADJUST_REQUEST_LANE2_3 (207h).
[HOW]
Move the current write to DPCD Address DP_LINK_TRAINING_PATTERN_SET out
of its conditional block.
Signed-off-by: Wesley Chalmers <[email protected]>
Reviewed-by: Jun Lei <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[WHY]
We should skip programming manual trigger on non-primary planes when MPO is
enabled.
[HOW]
Implement an explicit mechanism for skipping manual trigger programming
for planes that shouldn't cause the frame to end.
Signed-off-by: Aric Cyr <[email protected]>
Reviewed-by: Anthony Koo <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Acked-by: Krunoslav Kovac <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Previous change had been reverted since it caused hang.
Remake change to avoid defect.
[Why]
1. Driver use umachannelnumber to calculate watermarks for stutter.
In asymmetric memory config, the actual bandwidth is less than
dual-channel. The bandwidth should be the same as single-channel.
2. We found single rank dimm need additional delay time for stutter.
[How]
Get information from each DIMM. Treat memory config as a single-channel
for asymmetric memory in bandwidth calculating.
Add additional delay time for single rank dimm.
Fixes: b8720ed0b87d32 ("drm/amd/display: System black screen hangs on driver load")
Signed-off-by: Hugo Hu <[email protected]>
Reviewed-by: Sung Lee <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Found that dc_link_reallocate_mst_payload is not used anymore
in any of the use case scenario.
[How]
removed dc_link_reallocate_mst_payload function definition
and declaration.
Signed-off-by: Robin Singh <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Primary feature use case is with eDP panels.
[How]
Fail seamless boot validation if display is not an eDP panel.
Signed-off-by: Anthony Wang <[email protected]>
Reviewed-by: Martin Leung <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
the current implementation of hdcp2 rx id list validation does not
have handler/checker for invalid message status, e.g. HMAC, the V
parameter calculated from PSP not matching the V prime from Rx.
[how]
return a generic FAILURE for any message status not SUCCESS or
REVOKED.
Signed-off-by: Dingchen (David) Zhang <[email protected]>
Reviewed-by: Bhawanpreet Lakha <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
currently we enforce to update hdcp display using TYPE0, but there
is case that connector CP type prop be TYPE1 instead of type0.
[how]
using the drm prop of CP type of the connector as input argument.
Signed-off-by: Dingchen (David) Zhang <[email protected]>
Reviewed-by: Bhawanpreet Lakha <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How]
We want to immediately fail seamless boot validation if DSC is active,
as VBIOS currently does not support DSC timings. Add a check for
the relevant flag in dc_validate_seamless_boot_timing.
Signed-off-by: Anthony Wang <[email protected]>
Reviewed-by: Martin Leung <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
During dsc enable, a divide by zero condition triggered the
kernel crash.
[how]
An IGT test, which enable the DSC, was crashing at the time of
restore the default dsc status, becaue of h_totals value
becoming 0. So add a check before divide condition. If h_total
is zero, gracefully ignore and set the default value.
kernel panic log:
[ 128.758827] divide error: 0000 [#1] PREEMPT SMP NOPTI
[ 128.762714] CPU: 5 PID: 4562 Comm: amd_dp_dsc Tainted: G W 5.4.19-android-x86_64 #1
[ 128.769728] Hardware name: ADVANCED MICRO DEVICES, INC. Mauna/Mauna, BIOS WMN0B13N Nov 11 2020
[ 128.777695] RIP: 0010:hubp2_vready_at_or_After_vsync+0x37/0x7a [amdgpu]
[ 128.785707] Code: 80 02 00 00 48 89 f3 48 8b 7f 08 b ......
[ 128.805696] RSP: 0018:ffffad8f82d43628 EFLAGS: 00010246
......
[ 128.857707] CR2: 00007106d8465000 CR3: 0000000426530000 CR4: 0000000000140ee0
[ 128.865695] Call Trace:
[ 128.869712] hubp3_setup+0x1f/0x7f [amdgpu]
[ 128.873705] dcn20_update_dchubp_dpp+0xc8/0x54a [amdgpu]
[ 128.877706] dcn20_program_front_end_for_ctx+0x31d/0x463 [amdgpu]
[ 128.885706] dc_commit_state+0x3d2/0x658 [amdgpu]
[ 128.889707] amdgpu_dm_atomic_commit_tail+0x4b3/0x1e7c [amdgpu]
[ 128.897699] ? dm_read_reg_func+0x41/0xb5 [amdgpu]
[ 128.901707] ? dm_read_reg_func+0x41/0xb5 [amdgpu]
[ 128.905706] ? __is_insn_slot_addr+0x43/0x48
[ 128.909706] ? fill_plane_buffer_attributes+0x29e/0x3dc [amdgpu]
[ 128.917705] ? dm_plane_helper_prepare_fb+0x255/0x284 [amdgpu]
[ 128.921700] ? usleep_range+0x7c/0x7c
[ 128.925705] ? preempt_count_sub+0xf/0x18
[ 128.929706] ? _raw_spin_unlock_irq+0x13/0x24
[ 128.933732] ? __wait_for_common+0x11e/0x18f
[ 128.937705] ? _raw_spin_unlock_irq+0x13/0x24
[ 128.941706] ? __wait_for_common+0x11e/0x18f
[ 128.945705] commit_tail+0x8b/0xd2 [drm_kms_helper]
[ 128.949707] drm_atomic_helper_commit+0xd8/0xf5 [drm_kms_helper]
[ 128.957706] amdgpu_dm_atomic_commit+0x337/0x360 [amdgpu]
[ 128.961705] ? drm_atomic_check_only+0x543/0x68d [drm]
[ 128.969705] ? drm_atomic_set_property+0x760/0x7af [drm]
[ 128.973704] ? drm_mode_atomic_ioctl+0x6f3/0x85a [drm]
[ 128.977705] drm_mode_atomic_ioctl+0x6f3/0x85a [drm]
[ 128.985705] ? drm_atomic_set_property+0x7af/0x7af [drm]
[ 128.989706] drm_ioctl_kernel+0x82/0xda [drm]
[ 128.993706] drm_ioctl+0x225/0x319 [drm]
[ 128.997707] ? drm_atomic_set_property+0x7af/0x7af [drm]
[ 129.001706] ? preempt_count_sub+0xf/0x18
[ 129.005713] amdgpu_drm_ioctl+0x4b/0x76 [amdgpu]
[ 129.009705] vfs_ioctl+0x1d/0x2a
[ 129.013705] do_vfs_ioctl+0x419/0x43d
[ 129.017707] ksys_ioctl+0x52/0x71
[ 129.021707] __x64_sys_ioctl+0x16/0x19
[ 129.025706] do_syscall_64+0x78/0x85
[ 129.029705] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Robin Singh <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Reviewed-by: Robin Singh <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
dimgrey_cavefish has similar gc_10_3 ip with sienna_cichlid,
so follow its registers offset setting.
Signed-off-by: Jiansong Chen <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
resolve bug on aldebaran where gfx error counts will
print on driver load when there are no errors present
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: John Clements <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
because "sscanf(str, "retire_page")" always return 0, if application use
the raw data for error injection, it always wrongly falls into "op ==
3". Change to use strstr instead.
Signed-off-by: Dennis Li <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
In aldebaran, driver only needs to harvest SDP
RdRspStatus, WrRspStatus and first parity error
on RdRsp data. Check error type before harvest
error information.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
SDP RdRspStatus/WrRspStatus or first parity error on
RdRsp data can cause system fatal error in arcturus.
GPU will be freezed in such case.
Driver needs to harvest these error information before
reset the GPU. Check error type to avoid harvest normal
gcea/mmea information.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Stanley Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The tmz functions are verified on renoir chips as well. So enable it by
default.
Signed-off-by: Huang Rui <[email protected]>
Tested-by: Lang Yu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
When gfx wdt was configured to fatal_disable, the
timeout period should be configured to 0x0 (timeout
disabled)
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Dennis Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
In poison progogate mode, when driver receive the edc error interrupt
from SQ, driver should kill the process by pasid which is using the
poison data, and then trigger GPU reset.
Signed-off-by: Dennis Li <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Kernel test robot throws below warning ->
smatch warnings:
drivers/gpu/drm/radeon/si.c:4514 si_vm_packet3_cp_dma_check() warn:
inconsistent indenting
Fixed the inconsistent indenting.
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
We should return -EINVAL instead of success if the "limit" is too high.
Fixes: e098bc9612c2 ("drm/amd/pm: optimize the power related source code layout")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If the kmemdup() fails then this should return a negative error code
but it currently returns success
Fixes: b4a7db71ea06 ("drm/amdgpu: add per device user friendly xgmi events for vega20")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The value of pipe_id and queue_id are not used under certain
circumstances, so just delete.
Signed-off-by: Tian Tao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Accept non-linear buffers which use a multi-planar format, as long
as they don't use DCC.
Tested on GFX9 with NV12.
Signed-off-by: Simon Ser <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Nicholas Kazlauskas <[email protected]>
Cc: Bas Nieuwenhuizen <[email protected]>
Reviewed-by: Bas Nieuwenhuizen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch checks the return value of the function
dc_link_add_remote_sink before using it. This was causing
a crash during consecutive hotplugs of DP MST displays.
Cc: Harry Wentland <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Shashank Sharma <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
by plane.""
This reverts commit 55fa622fe635bfc3f2587d784f6facc30f8fdf12.
The regression caused by the original patch has been
cleared, thus introduce back the change.
Signed-off-by: Qingqing Zhuo <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Current list supports modifiers that have DCC_MAX_COMPRESSED_BLOCK
set to AMD_FMT_MOD_DCC_BLOCK_128B, while AMD_FMT_MOD_DCC_BLOCK_64B
is used instead by userspace.
[How]
Replace AMD_FMT_MOD_DCC_BLOCK_128B with AMD_FMT_MOD_DCC_BLOCK_64B
for modifiers with DCC supported.
Fixes: faa37f54ce0462 ("drm/amd/display: Expose modifiers")
Signed-off-by: Qingqing Zhuo <[email protected]>
Reviewed-by: Bas Nieuwenhuizen <[email protected]>
Tested-by: Bas Nieuwenhuizen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch is to revise two names of sensor values for vangogh.
New smu metrics table is supported by new pmfw
(from version 4.63.36.00 ), it includes two parts, one part is
the current smu metrics table data and the other part is the
average smu metrics table data. The hwmon will read the current gfxclk
and mclk from the current smu metrics table data.
Signed-off-by: Xiaojian Du <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch is to remove the "set" function of pp_dpm_mclk for vangogh.
For vangogh, mclk bonds with fclk, they will lock each other
on the same perfomance level. But according to the smu message from pmfw,
only fclk is allowed to set value manually, so remove the unnecessary
code of "set" function for mclk.
Signed-off-by: Xiaojian Du <[email protected]>
Acked-by: Huang Rui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If we skipped loading MEC2 firmware separately
from MEC, then MEC2 will be running the same
firmware image. Copy the MEC version and feature
numbers into MEC2 version and feature numbers.
This is needed for things like GWS support, where
we rely on knowing what version of firmware is
running on MEC2. Leaving these MEC2 entries blank
breaks our ability to version-check enables and
workarounds.
Signed-off-by: Joseph Greathouse <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch is to add the callback to get the bootup values for renoir.
Signed-off-by: Xiaojian Du <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch is to update the atomfirmware header for smu12.
v2: remove some unnecessary members
Signed-off-by: Xiaojian Du <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
ROCm user mode has acquired VMs from DRM file descriptors for as long
as it supported the upstream KFD. Legacy code to support older versions
of ROCm is not needed any more.
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Philip Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
SG_TABLE's for a VRAM BO
Extend current implementation of SG_TABLE construction method to
allow exportation of sub-buffers of a VRAM BO. This capability will
enable logical partitioning of a VRAM BO into multiple non-overlapping
sub-buffers. One example of this use case is to partition a VRAM BO
into two sub-buffers, one for SRC and another for DST.
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Ramesh Errabolu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add back the double-sscanf so that both decimal
and hexadecimal values could be read in, but this
time invert the scan so that hexadecimal format
with a leading 0x is tried first, and if that
fails, then try decimal format.
Also use a logical-AND instead of nesting double
if-conditional.
See commit "drm/amdgpu: Fix a bug for input with double sscanf"
Cc: Alexander Deucher <[email protected]>
Cc: Hawking Zhang <[email protected]>
Signed-off-by: Luben Tuikov <[email protected]>
Reviewed-by: John Clements <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
add ASPM support on polaris
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
enable ASPM on vega to save the power
without the performance hurt.
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
enable ASPM on navi1x for the benifit of system power consumption
without performance hurt.
Signed-off-by: Kenneth Feng <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
No need to config GECC feature here for sriov
Leave the host drvier to do the configuration job.
Signed-off-by: Jack Zhang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
When GFXCLK range is updated in manual/determinism mode, show the
updated min/max clock range.
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Harish Kasiviswanathan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Imporve the kernel-doc for the RAS sysfs
interface. Fix the grammar, fix the context.
Cc: Alexander Deucher <[email protected]>
Cc: Hawking Zhang <[email protected]>
Signed-off-by: Luben Tuikov <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add bad_page_cnt_threshold to debugfs, an optional
file system used for debugging, for reporting
purposes only--it usually matches the size of
EEPROM but may be different depending on the
"bad_page_threshold" kernel module option.
The "bad_page_cnt_threshold" is a dynamically
computed value. It depends on three things: the
VRAM size; the size of the EEPROM (or the size
allocated to the RAS table therein); and the
"bad_page_threshold" module parameter. It is a
dynamically computed value, when the amdgpu module
is run, on which further parameters and logic
depend, and as such it is helpful to see the
dynamically computed value in debugfs.
Cc: Alexander Deucher <[email protected]>
Cc: Hawking Zhang <[email protected]>
Signed-off-by: Luben Tuikov <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix if (ret) --> if (!ret), a bug, for
"retire_page", which caused the kernel to recall
the method with *pos == end of file, and that
bounced back with error. On the first run, we
advanced *pos, but returned 0 back to fs layer,
also a bug.
Fix the logic of the check of the result of
amdgpu_reserve_page_direct()--it is 0 on success,
and non-zero on error, not the other way
around. This patch fixes this bug.
Cc: Alexander Deucher <[email protected]>
Cc: John Clements <[email protected]>
Cc: Hawking Zhang <[email protected]>
Signed-off-by: Luben Tuikov <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Remove double-sscanf to scan for %llu and 0x%llx,
as that is not going to work!
The %llu will consume the "0" in "0x" of your
input, and the hex value you think you're entering
will always be 0. That is, a valid hex value can
never be consumed.
On the other hand, just entering a hex number
without leading 0x will either be scanned as a
string and not match, for instance FAB123, or
the leading decimal portion is scanned as the
%llu, for instance 123FAB will be scanned as 123,
which is not correct.
Thus remove the first %llu scan and leave only the
%llx scan, removing the leading 0x since %llx can
scan either.
Addresses are usually always hex values, so this
suffices.
Cc: Alexander Deucher <[email protected]>
Cc: Xinhui Pan <[email protected]>
Cc: Hawking Zhang <[email protected]>
Signed-off-by: Luben Tuikov <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|