Age | Commit message (Collapse) | Author | Files | Lines |
|
pp_dpm_*clk should be set as read only for SRIOV one VF mode, remove
S_IWUGO flag and _store function of these debugfs in one VF mode.
Signed-off-by: Lin.Cao <[email protected]>
Acked-by: Jingwen Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
It was previously disabled for stability purposes, but command
submission causes residency issues in IPS video playback.
[How]
Enable the disallow/reallow pattern back. There's additional checks
now in DMCUB that should make this safer stability wise.
Reviewed-by: Duncan Ma <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why & how]
To enable a new interface so alternate scrambling can be done via
security module.
Reviewed-by: Wenjing Liu <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Sung Joon Kim <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
The hard coded DPM states are only used to fix mismatch states numbers from FW.
[How]
Remove when not needed.
Reviewed-by: Sung joon Kim <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Xi Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
It's possible to skip parts of the eval and exit sequencing if we know
whether DCN is in IPS2 already or if it's committed to going to idle
and not in IPS2.
[How]
Skip IPS2 entry/exit if DMCUB is idle but the IPS2 commit is not set.
Skip the eval delay if DMCUB is already in IPS2 since we know we need
to exit.
These are turned off by default.
Reviewed-by: Duncan Ma <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Cursor updates can be preempted by queued flips in some DMs.
The synchronization model causes this to occur within the same thread
at an intermediate level when we insert logs into the OS queue.
Since this occurs on the same thread and we're still holding the lock
(recursively) the cache is coherent.
The exit sequence will run twice since we technically haven't finished
the exit the first time, so we need a way to detect and avoid the
reallow in the middle of this call to prevent the hang on the cursor
update that was preempted.
[How]
Keep a counter that tracks the depth of the exit calls. Do not reallow
until the counter is zero.
Reviewed-by: Duncan Ma <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why and how]
Bounding box clocks for DCN351 should be increased as per request
Reviewed-by: Swapnil Patel <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Xi Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Disabling stream encoder invokes a function that no longer exists.
[How]
Check if the function declaration is NULL in disable stream encoder.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Chris Park <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Increase Z8 watermark times from 210->250us and 320->350us.
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Natanel Roizenman <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
APU has different refclk as dGPU which is used for AUX_DPHY setup
Reviewed-by: Chris Park <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Charlene Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
add ras event id support for ACA.
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Because the UE Valid MCA count will only be cleared after reset,
in order to avoid repeated counting of the error count,
the aca bank is only updated once during ras isr.
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
retrieve umc odecc error count for aca umc v12.0
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Check cgroup permissions when returning DMA-buf info and
based on cgroup info return the GPU id of the GPU that have
access to the BO.
Signed-off-by: Mukul Joshi <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Added debug prints for zstate_support and StutterPeriod in
dcn35_decide_zstate_support for testing.
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Natanel Roizenman <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[WHY&HOW]
Even if memory lower power feature policy states that it is disabled,
VPG memory should still be poweerd on if it is currently disabled when
requested.
Reviewed-by: Chris Park <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Dillon Varone <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
need to apply the debug key check for max displayclk.
Reviewed-by: Chris Park <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Charlene Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This will add VCN sensor value for SMU 14.0.0.
Signed-off-by: Xiaojian Du <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The idea behind this patch is to delay the freeing of PT entry objects
until the TLB flush is done.
This patch:
- Adds a tlb_flush_waitlist in amdgpu_vm_update_params which will keep the
objects that need to be freed after tlb_flush.
- Adds PT entries in this list in amdgpu_vm_ptes_update after finding
the PT entry.
- Changes functionality of amdgpu_vm_pt_free_dfs from (df_search + free)
to simply freeing of the BOs, also renames it to
amdgpu_vm_pt_free_list to reflect this same.
- Exports function amdgpu_vm_pt_free_list to be called directly.
- Calls amdgpu_vm_pt_free_list directly from amdgpu_vm_update_range.
V2: rebase
V4: Addressed review comments from Christian
- add only locked PTEs entries in TLB flush waitlist.
- do not create a separate function for list flush.
- do not create a new lock for TLB flush.
- there is no need to wait on tlb_flush_fence exclusively.
V5: Addressed review comments from Christian
- change the amdgpu_vm_pt_free_dfs's functionality to simple freeing
of the objects and rename it.
- add all the PTE objects in params->tlb_flush_waitlist
- let amdgpu_vm_pt_free_root handle the freeing of BOs independently
- call amdgpu_vm_pt_free_list directly
V6: Rebase
V7: Rebase
V8: Added a NULL check to fix this backtrace issue:
[ 415.351447] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 415.359245] #PF: supervisor write access in kernel mode
[ 415.365081] #PF: error_code(0x0002) - not-present page
[ 415.370817] PGD 101259067 P4D 101259067 PUD 10125a067 PMD 0
[ 415.377140] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 415.382004] CPU: 0 PID: 25481 Comm: test_with_MPI.e Tainted: G OE 5.18.2-mi300-build-140423-ubuntu-22.04+ #24
[ 415.394437] Hardware name: AMD Corporation Sh51p/Sh51p, BIOS RMO1001AS 02/21/2024
[ 415.402797] RIP: 0010:amdgpu_vm_ptes_update+0x6fd/0xa10 [amdgpu]
[ 415.409648] Code: 4c 89 ff 4d 8d 66 30 e8 f1 ed ff ff 48 85 db 74 42 48 39 5d a0 74 40 48 8b 53 20 48 8b 4b 18 48 8d 43 18 48 8d 75 b0 4c 89 ff <48
> 89 51 08 48 89 0a 49 8b 56 30 48 89 42 08 48 89 53 18 4c 89 63
[ 415.430621] RSP: 0018:ffffc9000401f990 EFLAGS: 00010287
[ 415.436456] RAX: ffff888147bb82f0 RBX: ffff888147bb82d8 RCX: 0000000000000000
[ 415.444426] RDX: 0000000000000000 RSI: ffffc9000401fa30 RDI: ffff888161f80000
[ 415.452397] RBP: ffffc9000401fa80 R08: 0000000000000000 R09: ffffc9000401fa00
[ 415.460368] R10: 00000007f0cc0000 R11: 00000007f0c85000 R12: ffffc9000401fb20
[ 415.468340] R13: 00000007f0d00000 R14: ffffc9000401faf0 R15: ffff888161f80000
[ 415.476312] FS: 00007f132ff89840(0000) GS:ffff889f87c00000(0000) knlGS:0000000000000000
[ 415.485350] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 415.491767] CR2: 0000000000000008 CR3: 0000000161d46003 CR4: 0000000000770ef0
[ 415.499738] PKRU: 55555554
[ 415.502750] Call Trace:
[ 415.505482] <TASK>
[ 415.507825] amdgpu_vm_update_range+0x32a/0x880 [amdgpu]
[ 415.513869] amdgpu_vm_clear_freed+0x117/0x250 [amdgpu]
[ 415.519814] amdgpu_amdkfd_gpuvm_unmap_memory_from_gpu+0x18c/0x250 [amdgpu]
[ 415.527729] kfd_ioctl_unmap_memory_from_gpu+0xed/0x340 [amdgpu]
[ 415.534551] kfd_ioctl+0x3b6/0x510 [amdgpu]
V9: Addressed review comments from Christian
- No NULL check reqd for root PT freeing
- Free PT list regardless of needs_flush
- Move adding BOs in list in a separate function
V10: Added Christian's RB
V11: squash in list fix
Cc: Christian König <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Felix Kuehling <[email protected]>
Cc: Rajneesh Bhardwaj <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Acked-by: Rajneesh Bhardwaj <[email protected]>
Reviewed-by: Christian König <[email protected]>
Tested-by: Rajneesh Bhardwaj <[email protected]>
Signed-off-by: Shashank Sharma <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
add new vcn and jpeg msg
v2: squash in updates (Alex)
v3: rework code for better compat with other smu14.x variants (Alex)
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: lima1002 <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable smuio v14_0_2_callbacks
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add smuio callback to get gpu clk counter
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add smuio v14_0_2 ip block support
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
v1: Add smuio v14_0_2 register offset and shift masks
header files. (Hawking)
v2: Update smuio v14_0_2 register offset and shift masks
header files to RE2. (Likun)
v3: Update smuio v14_0_2 register offset and shift masks
header files to RE2.5. (Likun)
v4: Clean up smuio v14_0_2 ip headers (Alex)
Signed-off-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Likun Gao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
add umc v12.0.0 deferred error support.
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
add aca deferred error type support
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This will add VCN sensor value for SMU 13.0.5.
Signed-off-by: Xiaojian Du <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Each RAS block has different requirement for gpu reset in poison
consumption handling.
Add support for mmhub RAS poison consumption handling.
v2: remove the mmhub poison support for kfd int v10.
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
retire unused aca_bank_report data structure.
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Cursor update can be pre-empted by a request for setting target flip
submission.
This causes an issue where we're in the middle of the exit sequence
trying to log to DM, but the pre-emption starts another DMCUB
command submission that requires being out of idle.
The DC lock aqusition can fail, and depending on the DM/OS interface
it's possible that the function inserted into this thread must not fail.
This means that lock aqusition must be skipped and exit *must* occur.
[How]
Modify when we consider idle as active. Consider it exited only once
the exit has fully finished.
Consider it as entered prior to actual notification.
Since we're on the same core/thread the cached values are coherent
and we'll see that we still need to exit. Once the cursor update resumes
it'll continue doing the double exit but this won't cause a functional
issue, just a (potential) redundant operation.
Reviewed-by: Duncan Ma <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This will add VCN sensor value for yellow carp.
Signed-off-by: Xiaojian Du <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use helper function instead of umc callback to set
EEPROM table version.
Signed-off-by: Candice Li <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This version brings along following fixes:
- Clear mpc_tree in init_pipes
- Program pixclk according to dcn revision
- Add stream clock source to DP DTO params
- Enabling urgent latency adjustment for DCN35
- To adjust dprefclk by down spread percentage
- Add debug option for idle reg checks
- Revert few patches which cause regression
- skip forcing odm in minimal transition
- Fix noise issue on HDMI AV mute
- Enable fast update for DCN314
- Enable 2to1 ODM policy for DCN35
- Fix DCN31 underflow problem
- Add the MALL size in the fallback function
- Modify coding style/errors and remove redundant codes
- Add missing registers and offset
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Aric Cyr <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
- Add a Replay residency mode which only calcuates the
entry time based on replay state 0/1 switch.
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Anthony Koo <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
refine aca error cache for umc v12.0
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
refine aca error cache for sdma v4.4.2
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
refine aca error cache for xgmi v6.4.0
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Support the query for both gfxhub and mmhub, also replace
xcc_id with hub_inst.
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add it for mmhub v1.8.
Signed-off-by: Tao Zhou <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This will drm/amdgpu: add VCN sensor value for Vangogh.
Signed-off-by: Xiaojian Du <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
During init_pipes, otg master is not initialized. So mpc tree is
still configured even if mpc bottom is not active
[How]
For pipes that have tg enabled, check their mpc tree and clear
opp_list if mpc bottom is not active
Reviewed-by: George Shen <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Samson Tam <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
refine aca error cache for mmhub v1.8
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[WHY&HOW]
Pixel clock programming should be built per dcn revision, not hardcoded to use
dcn20.
Reviewed-by: Chris Park <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Dillon Varone <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[WHY&HOW]
Stream clock source is a required parameter for DP DTO programming.
Reviewed-by: Chris Park <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Dillon Varone <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The problem is that when (for example) 4k pages are replaced
with a single 2M page we need to wait for change to be flushed
out by invalidating the TLB before the PT can be freed.
Solve this by moving the TLB flush into a DMA-fence object which
can be used to delay the freeing of the PT BOs until it is signaled.
V2: (Shashank)
- rebase
- set dma_fence_error only in case of error
- add tlb_flush fence only when PT/PD BO is locked (Felix)
- use vm->pasid when f is NULL (Mukul)
V4: - add a wait for (f->dependency) in tlb_fence_work (Christian)
- move the misplaced fence_create call to the end (Philip)
V5: - free the f->dependency properly
V6: (Shashank)
- light code movement, moved all the clean-up in previous patch
- introduce params.needs_flush and its usage in this patch
- rebase without TLB HW sequence patch
V7:
- Keep the vm->last_update_fence and tlb_cb code until
we can fix the HW sequencing (Christian)
- Move all the tlb_fence related code in a separate function so that
its easier to read and review
V9: Addressed review comments from Christian
- start PT update only when we have callback memory allocated
V10:
- handle device unlock in OOM case (Christian, Mukul)
- added Christian's R-B
Cc: Christian Koenig <[email protected]>
Cc: Felix Kuehling <[email protected]>
Cc: Rajneesh Bhardwaj <[email protected]>
Cc: Alex Deucher <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Acked-by: Rajneesh Bhardwaj <[email protected]>
Tested-by: Rajneesh Bhardwaj <[email protected]>
Reviewed-by: Shashank Sharma <[email protected]>
Reviewed-by: Christian Koenig <[email protected]>
Signed-off-by: Christian Koenig <[email protected]>
Signed-off-by: Shashank Sharma <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
refine aca error cache for gfx 9.4.3
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
add new api to save error count into aca cache.
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add new types to distinguish between ACA error type and smu mca type.
e.g.:
the ACA_ERROR_TYPE_DEFERRED is not matched any smu mca valid bank
channel, so add new type 'aca_smu_type' to distinguish aca error type
and smu mca type.
Signed-off-by: Yang Wang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
pipe_ctx->plane_res.mpcc_inst is of a type that can only hold values
between 0 and 255, so it's always greater than or equal to 0.
Thus the condition 'pipe_ctx->plane_res.mpcc_inst >= 0' was always true
and has been removed.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn35/dcn35_hwseq.c:1023 dcn35_calc_blocks_to_gate() warn: always true condition '(pipe_ctx->plane_res.mpcc_inst >= 0) => (0-255 >= 0)'
Fixes: 6f8b7565cca4 ("drm/amd/display: Add DCN35 HWSEQ")
Cc: Qingqing Zhuo <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Rodrigo Siqueira <[email protected]>
Cc: Roman Li <[email protected]>
Cc: Aurabindo Pillai <[email protected]>
Cc: Tom Chung <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Adds descriptions for 'new_context', 'srf_updates', and
'surface_count', and removes the excess description for 'context'.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'new_context' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'srf_updates' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Function parameter or member 'surface_count' not described in 'commit_minimal_transition_state_in_dc_update'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4411: warning: Excess function parameter 'context' description in 'commit_minimal_transition_state_in_dc_update'
Cc: Wenjing Liu <[email protected]>
Cc: Alex Hung <[email protected]>
Cc: Rodrigo Siqueira <[email protected]>
Cc: Roman Li <[email protected]>
Cc: Aurabindo Pillai <[email protected]>
Cc: Tom Chung <[email protected]>
Signed-off-by: Srinivasan Shanmugam <[email protected]>
Reviewed-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|