aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-02-22net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHYSiddharth Vadapalli1-1/+3
Commit bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY. While that commit indicated that the RTL8211F_PHYCR2 register is not supported by the "VD-CG" PHY model and therefore updated the corresponding section in rtl8211f_config_init() to be invoked conditionally, the call to "genphy_soft_reset()" was left as-is, when it should have also been invoked conditionally. This is because the call to "genphy_soft_reset()" was first introduced by the commit 0a4355c2b7f8 ("net: phy: realtek: add dt property to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY reset should be issued after setting bits in the PHYCR2 register. As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the rtl8211f_config_init() function by invoking "genphy_soft_reset()" conditionally based on the presence of the "PHYCR2" register. Fixes: bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") Signed-off-by: Siddharth Vadapalli <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22Merge branch 'ioam6-fix-write-to-cloned-skb-s'Paolo Abeni3-67/+76
Justin Iurman says: ==================== ioam6: fix write to cloned skb's Make sure the IOAM data insertion is not applied on cloned skb's. As a consequence, ioam selftests needed a refactoring. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22selftests: ioam: refactoring to align with the fixJustin Iurman2-67/+66
ioam6_parser uses a packet socket. After the fix to prevent writing to cloned skb's, the receiver does not see its IOAM data anymore, which makes input/forward ioam-selftests to fail. As a workaround, ioam6_parser now uses an IPv6 raw socket and leverages ancillary data to get hop-by-hop options. As a consequence, the hook is "after" the IOAM data insertion by the receiver and all tests are working again. Signed-off-by: Justin Iurman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22Fix write to cloned skb in ipv6_hop_ioam()Justin Iurman1-0/+10
ioam6_fill_trace_data() writes inside the skb payload without ensuring it's writeable (e.g., not cloned). This function is called both from the input and output path. The output path (ioam6_iptunnel) already does the check. This commit provides a fix for the input path, inside ipv6_hop_ioam(). It also updates ip6_parse_tlv() to refresh the network header pointer ("nh") when returning from ipv6_hop_ioam(). Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace") Reported-by: Paolo Abeni <[email protected]> Signed-off-by: Justin Iurman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22phonet/pep: fix racy skb_queue_empty() useRémi Denis-Courmont1-9/+32
The receive queues are protected by their respective spin-lock, not the socket lock. This could lead to skb_peek() unexpectedly returning NULL or a pointer to an already dequeued socket buffer. Fixes: 9641458d3ec4 ("Phonet: Pipe End Point for Phonet Pipes protocol") Signed-off-by: Rémi Denis-Courmont <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22phonet: take correct lock to peek at the RX queueRémi Denis-Courmont1-2/+2
The receive queue is protected by its embedded spin-lock, not the socket lock, so we need the former lock here (and only that one). Fixes: 107d0d9b8d9a ("Phonet: Phonet datagram transport protocol") Reported-by: Luosili <[email protected]> Signed-off-by: Rémi Denis-Courmont <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-22erofs: fix refcount on the metabuf used for inode lookupSandeep Dhavale1-14/+14
In erofs_find_target_block() when erofs_dirnamecmp() returns 0, we do not assign the target metabuf. This causes the caller erofs_namei()'s erofs_put_metabuf() at the end to be not effective leaving the refcount on the page. As the page from metabuf (buf->page) is never put, such page cannot be migrated or reclaimed. Fix it now by putting the metabuf from previous loop and assigning the current metabuf to target before returning so caller erofs_namei() can do the final put as it was intended. Fixes: 500edd095648 ("erofs: use meta buffers for inode lookup") Cc: <[email protected]> # 5.18+ Signed-off-by: Sandeep Dhavale <[email protected]> Reviewed-by: Gao Xiang <[email protected]> Reviewed-by: Jingbo Xu <[email protected]> Reviewed-by: Chao Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Gao Xiang <[email protected]>
2024-02-21net: sparx5: Add spinlock for frame transmission from CPUHoratiu Vultur3-0/+4
Both registers used when doing manual injection or fdma injection are shared between all the net devices of the switch. It was noticed that when having two process which each of them trying to inject frames on different ethernet ports, that the HW started to behave strange, by sending out more frames then expected. When doing fdma injection it is required to set the frame in the DCB and then make sure that the next pointer of the last DCB is invalid. But because there is no locks for this, then easily this pointer between the DCB can be broken and then it would create a loop of DCBs. And that means that the HW will continuously transmit these frames in a loop. Until the SW will break this loop. Therefore to fix this issue, add a spin lock for when accessing the registers for manual or fdma injection. Signed-off-by: Horatiu Vultur <[email protected]> Reviewed-by: Daniel Machon <[email protected]> Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21net/sched: flower: Add lock protection when remove filter handleJianbo Liu1-1/+4
As IDR can't protect itself from the concurrent modification, place idr_remove() under the protection of tp->lock. Fixes: 08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Cosmin Ratiu <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21devlink: fix port dump cmd typeJiri Pirko1-1/+1
Unlike other commands, due to a c&p error, port dump fills-up cmd with wrong value, different from port-get request cmd, port-get doit reply and port notification. Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW. Skimmed through devlink userspace implementations, none of them cares about this cmd value. Only ynl, for which, this is actually a fix, as it expects doit and dumpit ops rsp_value to be the same. Omit the fixes tag, even thought this is fix, better to target this for next release. Fixes: bfcd3a466172 ("Introduce devlink infrastructure") Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21net: stmmac: Fix EST offset for dwmac 5.10Kurt Kanzenbach1-1/+1
Fix EST offset for dwmac 5.10. Currently configuring Qbv doesn't work as expected. The schedule is configured, but never confirmed: |[ 128.250219] imx-dwmac 428a0000.ethernet eth1: configured EST The reason seems to be the refactoring of the EST code which set the wrong EST offset for the dwmac 5.10. After fixing this it works as before: |[ 106.359577] imx-dwmac 428a0000.ethernet eth1: configured EST |[ 128.430715] imx-dwmac 428a0000.ethernet eth1: EST: SWOL has been switched Tested on imx93. Fixes: c3f3b97238f6 ("net: stmmac: Refactor EST implementation") Signed-off-by: Kurt Kanzenbach <[email protected]> Reviewed-by: Serge Semin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21Merge branch 'tools-ynl-fix-impossible-errors'Jakub Kicinski1-4/+15
Jakub Kicinski says: ==================== tools: ynl: fix impossible errors Fix bugs discovered while I was hacking in low level stuff in YNL and kept breaking the socket, exercising the "impossible" error paths. v1: https://lore.kernel.org/all/[email protected]/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21tools: ynl: don't leak mcast_groups on init errorJakub Kicinski1-1/+7
Make sure to free the already-parsed mcast_groups if we don't get an ack from the kernel when reading family info. This is part of the ynl_sock_create() error path, so we won't get a call to ynl_sock_destroy() to free them later. Fixes: 86878f14d71a ("tools: ynl: user space helpers") Acked-by: Nicolas Dichtel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21tools: ynl: make sure we always pass yarg to mnl_cb_runJakub Kicinski1-3/+8
There is one common error handler in ynl - ynl_cb_error(). It expects priv to be a pointer to struct ynl_parse_arg AKA yarg. To avoid potential crashes if we encounter a stray NLMSG_ERROR always pass yarg as priv (or a struct which has it as the first member). ynl_cb_null() has a similar problem directly - it expects yarg but priv passed by the caller is ys. Found by code inspection. Fixes: 86878f14d71a ("tools: ynl: user space helpers") Acked-by: Nicolas Dichtel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21net: mctp: put sock on tag allocation failureJeremy Kerr1-1/+1
We may hold an extra reference on a socket if a tag allocation fails: we optimistically allocate the sk_key, and take a ref there, but do not drop if we end up not using the allocated key. Ensure we're dropping the sock on this failure by doing a proper unref rather than directly kfree()ing. Fixes: de8a6b15d965 ("net: mctp: add an explicit reference from a mctp_sk_key to sock") Signed-off-by: Jeremy Kerr <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/ce9b61e44d1cdae7797be0c5e3141baf582d23a0.1707983487.git.jk@codeconstruct.com.au Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-22netfilter: nf_tables: use kzalloc for hook allocationFlorian Westphal1-1/+1
KMSAN reports unitialized variable when registering the hook, reg->hook_ops_type == NF_HOOK_OP_BPF) ~~~~~~~~~~~ undefined This is a small structure, just use kzalloc to make sure this won't happen again when new fields get added to nf_hook_ops. Fixes: 7b4b2fa37587 ("netfilter: annotate nf_tables base hook ops") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-02-22netfilter: nf_tables: register hooks last when adding new chain/flowtablePablo Neira Ayuso1-38/+40
Register hooks last when adding chain/flowtable to ensure that packets do not walk over datastructure that is being released in the error path without waiting for the rcu grace period. Fixes: 91c7b38dc9f0 ("netfilter: nf_tables: use new transaction infrastructure to handle chain") Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-02-22netfilter: nft_flow_offload: release dst in case direct xmit path is usedPablo Neira Ayuso1-0/+1
Direct xmit does not use it since it calls dev_queue_xmit() to send packets, hence it calls dst_release(). kmemleak reports: unreferenced object 0xffff88814f440900 (size 184): comm "softirq", pid 0, jiffies 4294951896 hex dump (first 32 bytes): 00 60 5b 04 81 88 ff ff 00 e6 e8 82 ff ff ff ff .`[............. 21 0b 50 82 ff ff ff ff 00 00 00 00 00 00 00 00 !.P............. backtrace (crc cb2bf5d6): [<000000003ee17107>] kmem_cache_alloc+0x286/0x340 [<0000000021a5de2c>] dst_alloc+0x43/0xb0 [<00000000f0671159>] rt_dst_alloc+0x2e/0x190 [<00000000fe5092c9>] __mkroute_output+0x244/0x980 [<000000005fb96fb0>] ip_route_output_flow+0xc0/0x160 [<0000000045367433>] nf_ip_route+0xf/0x30 [<0000000085da1d8e>] nf_route+0x2d/0x60 [<00000000d1ecd1cb>] nft_flow_route+0x171/0x6a0 [nft_flow_offload] [<00000000d9b2fb60>] nft_flow_offload_eval+0x4e8/0x700 [nft_flow_offload] [<000000009f447dbb>] expr_call_ops_eval+0x53/0x330 [nf_tables] [<00000000072e1be6>] nft_do_chain+0x17c/0x840 [nf_tables] [<00000000d0551029>] nft_do_chain_inet+0xa1/0x210 [nf_tables] [<0000000097c9d5c6>] nf_hook_slow+0x5b/0x160 [<0000000005eccab1>] ip_forward+0x8b6/0x9b0 [<00000000553a269b>] ip_rcv+0x221/0x230 [<00000000412872e5>] __netif_receive_skb_one_core+0xfe/0x110 Fixes: fa502c865666 ("netfilter: flowtable: simplify route logic") Reported-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-02-22netfilter: nft_flow_offload: reset dst in route object after setting up flowPablo Neira Ayuso2-4/+14
dst is transferred to the flow object, route object does not own it anymore. Reset dst in route object, otherwise if flow_offload_add() fails, error path releases dst twice, leading to a refcount underflow. Fixes: a3c90f7a2323 ("netfilter: nf_tables: flow offload expression") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-02-22netfilter: nf_tables: set dormant flag on hook register failureFlorian Westphal1-0/+1
We need to set the dormant flag again if we fail to register the hooks. During memory pressure hook registration can fail and we end up with a table marked as active but no registered hooks. On table/base chain deletion, nf_tables will attempt to unregister the hook again which yields a warn splat from the nftables core. Reported-and-tested-by: [email protected] Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-02-21Merge branch 'tls-fixes-for-record-type-handling-with-peek'Jakub Kicinski2-8/+61
Sabrina Dubroca says: ==================== tls: fixes for record type handling with PEEK There are multiple bugs in tls_sw_recvmsg's handling of record types when MSG_PEEK flag is used, which can lead to incorrectly merging two records: - consecutive non-DATA records shouldn't be merged, even if they're the same type (partly handled by the test at the end of the main loop) - records of the same type (even DATA) shouldn't be merged if one record of a different type comes in between ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21selftests: tls: add test for peeking past a record of a different typeSabrina Dubroca1-0/+19
If we queue 3 records: - record 1, type DATA - record 2, some other type - record 3, type DATA the current code can look past the 2nd record and merge the 2 data records. Signed-off-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/4623550f8617c239581030c13402d3262f2bd14f.1708007371.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21selftests: tls: add test for merging of same-type control messagesSabrina Dubroca1-0/+26
Two consecutive control messages of the same type should never be merged into one large received blob of data. Signed-off-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/018f1633d5471684c65def5fe390de3b15c3d683.1708007371.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21tls: don't skip over different type records from the rx_listSabrina Dubroca1-8/+14
If we queue 3 records: - record 1, type DATA - record 2, some other type - record 3, type DATA and do a recv(PEEK), the rx_list will contain the first two records. The next large recv will walk through the rx_list and copy data from record 1, then stop because record 2 is a different type. Since we haven't filled up our buffer, we will process the next available record. It's also DATA, so we can merge it with the current read. We shouldn't do that, since there was a record in between that we ignored. Add a flag to let process_rx_list inform tls_sw_recvmsg that it had more data available. Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/f00c0c0afa080c60f016df1471158c1caf983c34.1708007371.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21tls: stop recv() if initial process_rx_list gave us non-DATASabrina Dubroca1-1/+1
If we have a non-DATA record on the rx_list and another record of the same type still on the queue, we will end up merging them: - process_rx_list copies the non-DATA record - we start the loop and process the first available record since it's of the same type - we break out of the loop since the record was not DATA Just check the record type and jump to the end in case process_rx_list did some work. Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/bd31449e43bd4b6ff546f5c51cf958c31c511deb.1708007371.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21tls: break out of main loop when PEEK gets a non-data recordSabrina Dubroca1-0/+2
PEEK needs to leave decrypted records on the rx_list so that we can receive them later on, so it jumps back into the async code that queues the skb. Unfortunately that makes us skip the TLS_RECORD_TYPE_DATA check at the bottom of the main loop, so if two records of the same (non-DATA) type are queued, we end up merging them. Add the same record type check, and make it unlikely to not penalize the async fastpath. Async decrypt only applies to data record, so this check is only needed for PEEK. process_rx_list also has similar issues. Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Sabrina Dubroca <[email protected]> Link: https://lore.kernel.org/r/3df2eef4fdae720c55e69472b5bea668772b45a2.1708007371.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp()Vasiliy Kovalev1-5/+5
The gtp_net_ops pernet operations structure for the subsystem must be registered before registering the generic netlink family. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp] Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86 df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74 RSP: 0018:ffff888014107220 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? show_regs+0x90/0xa0 ? die_addr+0x50/0xd0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? gtp_genl_dump_pdp+0x1be/0x800 [gtp] ? __alloc_skb+0x1dd/0x350 ? __pfx___alloc_skb+0x10/0x10 genl_dumpit+0x11d/0x230 netlink_dump+0x5b9/0xce0 ? lockdep_hardirqs_on_prepare+0x253/0x430 ? __pfx_netlink_dump+0x10/0x10 ? kasan_save_track+0x10/0x40 ? __kasan_kmalloc+0x9b/0xa0 ? genl_start+0x675/0x970 __netlink_dump_start+0x6fc/0x9f0 genl_family_rcv_msg_dumpit+0x1bb/0x2d0 ? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10 ? genl_op_from_small+0x2a/0x440 ? cap_capable+0x1d0/0x240 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 ? security_capable+0x9d/0xe0 Cc: [email protected] Signed-off-by: Vasiliy Kovalev <[email protected]> Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-21hwmon: (nct6775) Fix access to temperature configuration registersGuenter Roeck1-2/+12
The number of temperature configuration registers does not always match the total number of temperature registers. This can result in access errors reported if KASAN is enabled. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x5654/0x6fe9 nct6775_core Reported-by: Erhard Furtner <[email protected]> Closes: https://lore.kernel.org/linux-hwmon/[email protected]/ Fixes: b7f1f7b2523a ("hwmon: (nct6775) Additional TEMP registers for nct6799") Cc: Ahmad Khalifa <[email protected]> Tested-by: Ahmad Khalifa <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2024-02-21docs: translations: use attribute to store current languageVegard Nossum1-6/+4
Akira Yokosawa reported [1] that the "translations" extension we added in commit 7418ec5b151f ("docs: translations: add translations links when they exist") broke the build on Sphinx versions v6.1.3 through 7.1.2 (possibly others) with the following error: Exception occurred: File "/usr/lib/python3.12/site-packages/sphinx/util/nodes.py", line 624, in _copy_except__document newnode = self.__class__(rawsource=self.rawsource, **self.attributes) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ TypeError: LanguagesNode.__init__() missing 1 required positional argument: 'current_language' The full traceback has been saved in /tmp/sphinx-err-7xmwytuu.log, if you want to report the issue to the developers. Solve this problem by making 'current_language' a true element attribute of the LanguagesNode element, which is probably the more correct way to do it anyway. Tested on Sphinx 2.x, 3.x, 6.x, and 7.x. [1]: https://lore.kernel.org/all/[email protected]/ Fixes: 7418ec5b151f ("docs: translations: add translations links when they exist") Reported-by: Akira Yokosawa <[email protected]> Signed-off-by: Vegard Nossum <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Tested-by: Akira Yokosawa <[email protected]> # Sphinx 4.3.2, 5.3.0 and 6.2.1 Signed-off-by: Jonathan Corbet <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-21irqchip/gic-v3-its: Do not assume vPE tables are preallocatedOliver Upton1-1/+1
The GIC/ITS code is designed to ensure to pick up any preallocated LPI tables on the redistributors, as enabling LPIs is a one-way switch. There is no such restriction for vLPIs, and for GICv4.1 it is expected to allocate a new vPE table at boot. This works as intended when initializing an ITS, however when setting up a redistributor in cpu_init_lpis() the early return for preallocated RD tables skips straight past the GICv4 setup. This all comes to a head when trying to kexec() into a new kernel, as the new kernel silently fails to set up GICv4, leading to a complete loss of SGIs and LPIs for KVM VMs. Slap a band-aid on the problem by ensuring its_cpu_init_lpis() always initializes GICv4 on the way out, even if the other RD tables were preallocated. Fixes: 6479450f72c1 ("irqchip/gic-v4: Fix occasional VLPI drop") Reported-by: George Cherian <[email protected]> Co-developed-by: Marc Zyngier <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Oliver Upton <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2024-02-21ata: libata-core: Do not call ata_dev_power_set_standby() twiceDamien Le Moal1-29/+30
For regular system shutdown, ata_dev_power_set_standby() will be executed twice: once the scsi device is removed and another when ata_pci_shutdown_one() executes and EH completes unloading the devices. Make the second call to ata_dev_power_set_standby() do nothing by using ata_dev_power_is_active() and return if the device is already in standby. Fixes: 2da4c5e24e86 ("ata: libata-core: Improve ata_dev_power_set_active()") Cc: [email protected] Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Niklas Cassel <[email protected]>
2024-02-21irqchip/mbigen: Don't use bus_get_dev_root() to find the parentChen Jun1-7/+1
bus_get_dev_root() returns sp->dev_root which is set in subsys_register(), but subsys_register() is not called by platform_bus_init(). Therefor for the platform_bus_type, bus_get_dev_root() always returns NULL. This makes mbigen_of_create_domain() always return -ENODEV. Don't try to retrieve the parent via bus_get_dev_root() and unconditionally hand a NULL pointer to of_platform_device_create() to fix this. Fixes: fea087fc291b ("irqchip/mbigen: move to use bus_get_dev_root()") Signed-off-by: Chen Jun <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2024-02-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+5
Pull kvm fixes from Paolo Bonzini: "Two fixes for ARM ITS emulation. Unmapped interrupts were used instead of ignored, causing NULL pointer dereferences" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()
2024-02-21Merge tag 'for-6.8-rc5-tag' of ↵Linus Torvalds2-18/+46
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - Fix a deadlock in fiemap. There was a big lock around the whole operation that can interfere with a page fault and mkwrite. Reducing the lock scope can also speed up fiemap - Fix range condition for extent defragmentation which could lead to worse layout in some cases * tag 'for-6.8-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix deadlock with fiemap and extent locking btrfs: defrag: avoid unnecessary defrag caused by incorrect extent size
2024-02-21Merge tag 'v6.8-p4' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix a stack overflow in virtio" * tag 'v6.8-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: virtio/akcipher - Fix stack overflow on memcpy
2024-02-21cache: ax45mp_cache: Align end size to cache boundary in ↵Lad Prabhakar1-0/+4
ax45mp_dma_cache_wback() Align the end size to cache boundary size in ax45mp_dma_cache_wback() callback likewise done in ax45mp_dma_cache_inv() callback. Additionally return early in case of start == end. Fixes: d34599bcd2e4 ("cache: Add L2 cache management for Andes AX45MP RISC-V core") Reported-by: Pavel Machek <[email protected]> Link: https://lore.kernel.org/cip-dev/[email protected]/ Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Conor Dooley <[email protected]>
2024-02-21bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()Shigeru Yoshida1-2/+5
syzbot reported the following NULL pointer dereference issue [1]: BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:0x0 [...] Call Trace: <TASK> sk_psock_verdict_data_ready+0x232/0x340 net/core/skmsg.c:1230 unix_stream_sendmsg+0x9b4/0x1230 net/unix/af_unix.c:2293 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 If sk_psock_verdict_data_ready() and sk_psock_stop_verdict() are called concurrently, psock->saved_data_ready can be NULL, causing the above issue. This patch fixes this issue by calling the appropriate data ready function using the sk_psock_data_ready() helper and protecting it from concurrency with sk->sk_callback_lock. Fixes: 6df7f764cd3c ("bpf, sockmap: Wake up polling after data copy") Reported-by: [email protected] Signed-off-by: Shigeru Yoshida <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Tested-by: [email protected] Acked-by: John Fastabend <[email protected]> Closes: https://syzkaller.appspot.com/bug?extid=fd7b34375c1c8ce29c93 [1] Link: https://lore.kernel.org/bpf/[email protected]
2024-02-21fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaioBart Van Assche2-1/+10
If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio. Suggested-by: Jens Axboe <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Avi Kivity <[email protected]> Cc: Sandeep Dhavale <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Kent Overstreet <[email protected]> Cc: [email protected] Signed-off-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2024-02-21ring-buffer: Do not let subbuf be bigger than write maskSteven Rostedt (Google)1-0/+4
The data on the subbuffer is measured by a write variable that also contains status flags. The counter is just 20 bits in length. If the subbuffer is bigger than then counter, it will fail. Make sure that the subbuffer can not be set to greater than the counter that keeps track of the data on the subbuffer. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Fixes: 2808e31ec12e5 ("ring-buffer: Add interface for configuring trace sub buffer size") Signed-off-by: Steven Rostedt (Google) <[email protected]>
2024-02-21s390: use the correct count for __iowrite64_copy()Jason Gunthorpe1-1/+1
The signature for __iowrite64_copy() requires the number of 64 bit quantities, not bytes. Multiple by 8 to get to a byte length before invoking zpci_memcpy_toio() Fixes: 87bc359b9822 ("s390/pci: speed up __iowrite64_copy by using pci store block insn") Acked-by: Niklas Schnelle <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Carstens <[email protected]>
2024-02-21iommufd: Reject non-zero data_type if no data_len is providedJason Gunthorpe1-1/+2
Since the current design doesn't forward the data_type to the driver to check unless there is a data_len/uptr for a driver specific struct we should check and ensure that data_type is 0 if data_len is 0. Otherwise any value is permitted. Fixes: bd529dbb661d ("iommufd: Add a nested HW pagetable object") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2024-02-21sparc: Fix undefined reference to fb_is_primary_deviceJavier Martinez Canillas2-2/+2
Commit 55bffc8170bb ("fbdev: Split frame buffer support in FB and FB_CORE symbols") added a new FB_CORE Kconfig symbol, that can be enabled to only have fbcon/VT and DRM fbdev emulation, but without support for any legacy fbdev driver. Unfortunately, it missed to change the CONFIG_FB in arch/sparc makefiles, which leads to the following linking error in some sparc64 configurations: sparc64-linux-ld: drivers/video/fbdev/core/fbcon.o: in function `fbcon_fb_registered': >> fbcon.c:(.text+0x4f60): undefined reference to `fb_is_primary_device' Fixes: 55bffc8170bb ("fbdev: Split frame buffer support in FB and FB_CORE symbols") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Signed-off-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Cc: <[email protected]> # v6.6+ Signed-off-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-21MAINTAINERS: Add framer headers to NETWORKING [GENERAL]Simon Horman1-0/+2
The cited commit [1] added framer support under drivers/net/wan, which is covered by NETWORKING [GENERAL]. And it is implied that framer-provider.h and framer.h, which were also added buy the same patch, are also maintained as part of NETWORKING [GENERAL]. Make this explicit by adding these files to the corresponding section in MAINTAINERS. [1] 82c944d05b1a ("net: wan: Add framer framework support") Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Herve Codina <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-21af_unix: Drop oob_skb ref before purging queue in GC.Kuniyuki Iwashima1-13/+9
syzbot reported another task hung in __unix_gc(). [0] The current while loop assumes that all of the left candidates have oob_skb and calling kfree_skb(oob_skb) releases the remaining candidates. However, I missed a case that oob_skb has self-referencing fd and another fd and the latter sk is placed before the former in the candidate list. Then, the while loop never proceeds, resulting the task hung. __unix_gc() has the same loop just before purging the collected skb, so we can call kfree_skb(oob_skb) there and let __skb_queue_purge() release all inflight sockets. [0]: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 2784 Comm: kworker/u4:8 Not tainted 6.8.0-rc4-syzkaller-01028-g71b605d32017 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Workqueue: events_unbound __unix_gc RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:200 Code: 89 fb e8 23 00 00 00 48 8b 3d 84 f5 1a 0c 48 89 de 5b e9 43 26 57 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0d 90 52 70 7e 65 8b 15 91 52 70 RSP: 0018:ffffc9000a17fa78 EFLAGS: 00000287 RAX: ffffffff8a0a6108 RBX: ffff88802b6c2640 RCX: ffff88802c0b3b80 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000 RBP: ffffc9000a17fbf0 R08: ffffffff89383f1d R09: 1ffff1100ee5ff84 R10: dffffc0000000000 R11: ffffed100ee5ff85 R12: 1ffff110056d84ee R13: ffffc9000a17fae0 R14: 0000000000000000 R15: ffffffff8f47b840 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffef5687ff8 CR3: 0000000029b34000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> __unix_gc+0xe69/0xf40 net/unix/garbage.c:343 process_one_work kernel/workqueue.c:2633 [inline] process_scheduled_works+0x913/0x1420 kernel/workqueue.c:2706 worker_thread+0xa5f/0x1000 kernel/workqueue.c:2787 kthread+0x2ef/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242 </TASK> Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=ecab4d36f920c3574bf9 Fixes: 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.") Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-21net: ipa: don't overrun IPA suspend interrupt registersAlex Elder1-1/+1
In newer hardware, IPA supports more than 32 endpoints. Some registers--such as IPA interrupt registers--represent endpoints as bits in a 4-byte register, and such registers are repeated as needed to represent endpoints beyond the first 32. In ipa_interrupt_suspend_clear_all(), we clear all pending IPA suspend interrupts by reading all status register(s) and writing corresponding registers to clear interrupt conditions. Unfortunately the number of registers to read/write is calculated incorrectly, and as a result we access *many* more registers than intended. This bug occurs only when the IPA hardware signals a SUSPEND interrupt, which happens when a packet is received for an endpoint (or its underlying GSI channel) that is suspended. This situation is difficult to reproduce, but possible. Fix this by correctly computing the number of interrupt registers to read and write. This is the only place in the code where registers that map endpoints or channels this way perform this calculation. Fixes: f298ba785e2d ("net: ipa: add a parameter to suspend registers") Signed-off-by: Alex Elder <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-21net: implement lockless setsockopt(SO_PEEK_OFF)Eric Dumazet3-34/+15
syzbot reported a lockdep violation [1] involving af_unix support of SO_PEEK_OFF. Since SO_PEEK_OFF is inherently not thread safe (it uses a per-socket sk_peek_off field), there is really no point to enforce a pointless thread safety in the kernel. After this patch : - setsockopt(SO_PEEK_OFF) no longer acquires the socket lock. - skb_consume_udp() no longer has to acquire the socket lock. - af_unix no longer needs a special version of sk_set_peek_off(), because it does not lock u->iolock anymore. As a followup, we could replace prot->set_peek_off to be a boolean and avoid an indirect call, since we always use sk_set_peek_off(). [1] WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00267-g0f1dd5e91e2b #0 Not tainted syz-executor.2/30025 is trying to acquire lock: ffff8880765e7d80 (&u->iolock){+.+.}-{3:3}, at: unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 but task is already holding lock: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline] ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline] ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_UNIX){+.+.}-{0:0}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_nested+0x48/0x100 net/core/sock.c:3524 lock_sock include/net/sock.h:1691 [inline] __unix_dgram_recvmsg+0x1275/0x12c0 net/unix/af_unix.c:2415 sock_recvmsg_nosec+0x18e/0x1d0 net/socket.c:1046 ____sys_recvmsg+0x3c0/0x470 net/socket.c:2801 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 -> #0 (&u->iolock){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 sk_setsockopt+0x207e/0x3360 do_sock_setsockopt+0x2fb/0x720 net/socket.c:2307 __sys_setsockopt+0x1ad/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_UNIX); lock(&u->iolock); lock(sk_lock-AF_UNIX); lock(&u->iolock); *** DEADLOCK *** 1 lock held by syz-executor.2/30025: #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline] #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline] #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193 stack backtrace: CPU: 0 PID: 30025 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00267-g0f1dd5e91e2b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 sk_setsockopt+0x207e/0x3360 do_sock_setsockopt+0x2fb/0x720 net/socket.c:2307 __sys_setsockopt+0x1ad/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f78a1c7dda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f78a0fde0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007f78a1dac050 RCX: 00007f78a1c7dda9 RDX: 000000000000002a RSI: 0000000000000001 RDI: 0000000000000006 RBP: 00007f78a1cca47a R08: 0000000000000004 R09: 0000000000000000 R10: 0000000020000180 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f78a1dac050 R15: 00007ffe5cd81ae8 Fixes: 859051dd165e ("bpf: Implement cgroup sockaddr hooks for unix sockets") Signed-off-by: Eric Dumazet <[email protected]> Cc: Willem de Bruijn <[email protected]> Cc: Daan De Meyer <[email protected]> Cc: Kuniyuki Iwashima <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: David Ahern <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-21octeontx2-af: Consider the action set by PFSubbaraya Sundeep1-0/+4
AF reserves MCAM entries for each PF, VF present in the system and populates the entry with DMAC and action with default RSS so that basic packet I/O works. Since PF/VF is not aware of the RSS action installed by AF, AF only fixup the actions of the rules installed by PF/VF with corresponding default RSS action. This worked well for rules installed by PF/VF for features like RX VLAN offload and DMAC filters but rules involving action like drop/forward to queue are also getting modified by AF. Hence fix it by setting the default RSS action only if requested by PF/VF. Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-21Merge tag 'kvmarm-fixes-6.8-3' of ↵Paolo Bonzini1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.8, take #3 - Check for the validity of interrupts handled by a MOVALL command - Check for the validity of interrupts while reading the pending state on enabling LPIs.
2024-02-21drm/xe: Fix modpost warning on xe_mocs kunit moduleAshutosh Dixit1-0/+1
$ make W=1 -j100 M=drivers/gpu/drm/xe MODPOST drivers/gpu/drm/xe/Module.symvers WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/gpu/drm/xe/tests/xe_mocs_test.o Fix is identical to '1d425066f15f ("drm/xe: Fix modpost warning on kunit modules")'. Fixes: a6a4ea6d7d37 ("drm/xe: Add mocs kunit") Signed-off-by: Ashutosh Dixit <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> (cherry picked from commit bb619d71224ea85ec94e0a83b2bb82ebe7df2a41) Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Thomas Hellström <[email protected]>
2024-02-21KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handlerOliver Upton1-0/+2
It is possible that an LPI mapped in a different ITS gets unmapped while handling the MOVALL command. If that is the case, there is no state that can be migrated to the destination. Silently ignore it and continue migrating other LPIs. Cc: [email protected] Fixes: ff9c114394aa ("KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE") Signed-off-by: Oliver Upton <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Zyngier <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.