aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-11-29mctp: test: fix skb free in test device txJeremy Kerr1-1/+1
In our test device, we're currently freeing skbs in the transmit path with kfree(), rather than kfree_skb(). This change uses the correct kfree_skb() instead. Fixes: ded21b722995 ("mctp: Add test utils") Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Jeremy Kerr <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29net/tls: Fix authentication failure in CCM modeTianjia Zhang1-2/+2
When the TLS cipher suite uses CCM mode, including AES CCM and SM4 CCM, the first byte of the B0 block is flags, and the real IV starts from the second byte. The XOR operation of the IV and rec_seq should be skip this byte, that is, add the iv_offset. Fixes: f295b3ae9f59 ("net/tls: Add support of AES128-CCM based ciphers") Signed-off-by: Tianjia Zhang <[email protected]> Cc: Vakul Garg <[email protected]> Cc: [email protected] # v5.2+ Signed-off-by: David S. Miller <[email protected]>
2021-11-29Merge branch 'mpls-notifications'David S. Miller2-36/+63
Benjamin Poirier says: ==================== net: mpls: Netlink notification fixes fix missing or inaccurate route notifications when devices used in nexthops are deleted. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-11-29net: mpls: Remove rcu protection from nh_devBenjamin Poirier2-25/+16
Following the previous commit, nh_dev can no longer be accessed and modified concurrently. Signed-off-by: Benjamin Poirier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29net: mpls: Fix notifications when deleting a deviceBenjamin Poirier1-16/+52
There are various problems related to netlink notifications for mpls route changes in response to interfaces being deleted: * delete interface of only nexthop DELROUTE notification is missing RTA_OIF attribute * delete interface of non-last nexthop NEWROUTE notification is missing entirely * delete interface of last nexthop DELROUTE notification is missing nexthop All of these problems stem from the fact that existing routes are modified in-place before sending a notification. Restructure mpls_ifdown() to avoid changing the route in the DELROUTE cases and to create a copy in the NEWROUTE case. Fixes: f8efb73c97e2 ("mpls: multipath route support") Signed-off-by: Benjamin Poirier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29net: usb: lan78xx: lan78xx_phy_init(): use PHY_POLL instead of "0" if no IRQ ↵Sven Schuchmann1-1/+1
is available On most systems request for IRQ 0 will fail, phylib will print an error message and fall back to polling. To fix this set the phydev->irq to PHY_POLL if no IRQ is available. Fixes: cc89c323a30e ("lan78xx: Use irq_domain for phy interrupt from USB Int. EP") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Sven Schuchmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29USB: NO_LPM quirk Lenovo Powered USB-C Travel HubOle Ernst1-0/+3
This is another branded 8153 device that doesn't work well with LPM: r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71 Disable LPM to resolve the issue. Signed-off-by: Ole Ernst <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29net: dsa: realtek-smi: fix indirect reg access for ports>3Luiz Angelo Daros de Luca1-1/+8
This switch family can have up to 8 UTP ports {0..7}. However, INDIRECT_ACCESS_ADDRESS_PHYNUM_MASK was using 2 bits instead of 3, dropping the most significant bit during indirect register reads and writes. Reading or writing ports 4, 5, 6, and 7 registers was actually manipulating, respectively, ports 0, 1, 2, and 3 registers. This is not sufficient but necessary to support any variant with more than 4 UTP ports, like RTL8367S. rtl8365mb_phy_{read,write} will now returns -EINVAL if phy is greater than 7. Fixes: 4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC") Signed-off-by: Luiz Angelo Daros de Luca <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29tcp: fix page frag corruption on page faultPaolo Abeni1-5/+8
Steffen reported a TCP stream corruption for HTTP requests served by the apache web-server using a cifs mount-point and memory mapping the relevant file. The root cause is quite similar to the one addressed by commit 20eb4f29b602 ("net: fix sk_page_frag() recursion from memory reclaim"). Here the nested access to the task page frag is caused by a page fault on the (mmapped) user-space memory buffer coming from the cifs file. The page fault handler performs an smb transaction on a different socket, inside the same process context. Since sk->sk_allaction for such socket does not prevent the usage for the task_frag, the nested allocation modify "under the hood" the page frag in use by the outer sendmsg call, corrupting the stream. The overall relevant stack trace looks like the following: httpd 78268 [001] 3461630.850950: probe:tcp_sendmsg_locked: ffffffff91461d91 tcp_sendmsg_locked+0x1 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139814e sock_sendmsg+0x3e ffffffffc06dfe1d smb_send_kvec+0x28 [...] ffffffffc06cfaf8 cifs_readpages+0x213 ffffffff90e83c4b read_pages+0x6b ffffffff90e83f31 __do_page_cache_readahead+0x1c1 ffffffff90e79e98 filemap_fault+0x788 ffffffff90eb0458 __do_fault+0x38 ffffffff90eb5280 do_fault+0x1a0 ffffffff90eb7c84 __handle_mm_fault+0x4d4 ffffffff90eb8093 handle_mm_fault+0xc3 ffffffff90c74f6d __do_page_fault+0x1ed ffffffff90c75277 do_page_fault+0x37 ffffffff9160111e page_fault+0x1e ffffffff9109e7b5 copyin+0x25 ffffffff9109eb40 _copy_from_iter_full+0xe0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139815c sock_sendmsg+0x4c ffffffff913981f7 sock_write_iter+0x97 ffffffff90f2cc56 do_iter_readv_writev+0x156 ffffffff90f2dff0 do_iter_write+0x80 ffffffff90f2e1c3 vfs_writev+0xa3 ffffffff90f2e27c do_writev+0x5c ffffffff90c042bb do_syscall_64+0x5b ffffffff916000ad entry_SYSCALL_64_after_hwframe+0x65 The cifs filesystem rightfully sets sk_allocations to GFP_NOFS, we can avoid the nesting using the sk page frag for allocation lacking the __GFP_FS flag. Do not define an additional mm-helper for that, as this is strictly tied to the sk page frag usage. v1 -> v2: - use a stricted sk_page_frag() check instead of reordering the code (Eric) Reported-by: Steffen Froemer <[email protected]> Fixes: 5640f7685831 ("net: use a per task frag allocator") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29i2c: stm32f7: flush TX FIFO upon transfer errorsAlain Volmat1-1/+19
While handling an error during transfer (ex: NACK), it could happen that the driver has already written data into TXDR before the transfer get stopped. This commit add TXDR Flush after end of transfer in case of error to avoid sending a wrong data on any other slave upon next transfer. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <[email protected]> Reviewed-by: Pierre-Yves MORDRET <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-11-29net: stmmac: Avoid DMA_CHAN_CONTROL write if no Split Header supportVincent Whitchurch1-5/+6
The driver assumes that split headers can be enabled/disabled without stopping/starting the device, so it writes DMA_CHAN_CONTROL from stmmac_set_features(). However, on my system (IP v5.10a without Split Header support), simply writing DMA_CHAN_CONTROL when DMA is running (for example, with the commands below) leads to a TX watchdog timeout. host$ socat TCP-LISTEN:1024,fork,reuseaddr - & device$ ethtool -K eth0 tso off device$ ethtool -K eth0 tso on device$ dd if=/dev/zero bs=1M count=10 | socat - TCP4:host:1024 <tx watchdog timeout> Note that since my IP is configured without Split Header support, the driver always just reads and writes the same value to the DMA_CHAN_CONTROL register. I don't have access to any platforms with Split Header support so I don't know if these writes to the DMA_CHAN_CONTROL while DMA is running actually work properly on such systems. I could not find anything in the databook that says that DMA_CHAN_CONTROL should not be written when the DMA is running. But on systems without Split Header support, there is in any case no need to call enable_sph() in stmmac_set_features() at all since SPH can never be toggled, so we can avoid the watchdog timeout there by skipping this call. Fixes: 8c6fc097a2f4acf ("net: stmmac: gmac4+: Add Split Header support") Signed-off-by: Vincent Whitchurch <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-11-29sata_fsl: fix warning in remove_proc_entry when rmmod sata_fslBaokun Li1-5/+3
Trying to remove the fsl-sata module in the PPC64 GNU/Linux leads to the following warning: ------------[ cut here ]------------ remove_proc_entry: removing non-empty directory 'irq/69', leaking at least 'fsl-sata[ff0221000.sata]' WARNING: CPU: 3 PID: 1048 at fs/proc/generic.c:722 .remove_proc_entry+0x20c/0x220 IRQMASK: 0 NIP [c00000000033826c] .remove_proc_entry+0x20c/0x220 LR [c000000000338268] .remove_proc_entry+0x208/0x220 Call Trace: .remove_proc_entry+0x208/0x220 (unreliable) .unregister_irq_proc+0x104/0x140 .free_desc+0x44/0xb0 .irq_free_descs+0x9c/0xf0 .irq_dispose_mapping+0x64/0xa0 .sata_fsl_remove+0x58/0xa0 [sata_fsl] .platform_drv_remove+0x40/0x90 .device_release_driver_internal+0x160/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] ---[ end trace 0ea876d4076908f5 ]--- The driver creates the mapping by calling irq_of_parse_and_map(), so it also has to dispose the mapping. But the easy way out is to simply use platform_get_irq() instead of irq_of_parse_map(). Also we should adapt return value checking and propagate error values. In this case the mapping is not managed by the device but by the of core, so the device has not to dispose the mapping. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: [email protected] Reported-by: Hulk Robot <[email protected]> Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Sergei Shtylyov <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2021-11-29sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fslBaokun Li1-2/+10
When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: [email protected] Reported-by: Hulk Robot <[email protected]> Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Sergei Shtylyov <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2021-11-29pata_falcon: Avoid type warnings from sparseFinn Thain1-8/+8
The zero day bot reported some sparse complaints in pata_falcon.c. E.g. drivers/ata/pata_falcon.c:58:41: warning: cast removes address space '__iomem' of expression drivers/ata/pata_falcon.c:58:41: warning: incorrect type in argument 1 (different address spaces) drivers/ata/pata_falcon.c:58:41: expected unsigned short volatile [noderef] [usertype] __iomem *port drivers/ata/pata_falcon.c:58:41: got unsigned short [usertype] * The same thing shows up in 8 places, all told. Avoid this by removing unnecessary type casts. Cc: Jens Axboe <[email protected]> Cc: Michael Schmitz <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Reported-by: kernel test robot <[email protected]> Suggested-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Finn Thain <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2021-11-29rt2x00: do not mark device gone on EPROTO errors during startStanislaw Gruszka1-0/+3
As reported by Exuvo is possible that we have lot's of EPROTO errors during device start i.e. firmware load. But after that device works correctly. Hence marking device gone by few EPROTO errors done by commit e383c70474db ("rt2x00: check number of EPROTO errors") caused regression - Exuvo device stop working after kernel update. To fix disable the check during device start. Link: https://lore.kernel.org/linux-wireless/[email protected]/ Reported-and-tested-by: Exuvo <[email protected]> Fixes: e383c70474db ("rt2x00: check number of EPROTO errors") Cc: [email protected] Signed-off-by: Stanislaw Gruszka <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-11-29drm/virtio: use drm_poll(..) instead of virtio_gpu_poll(..)Gurchetan Singh1-41/+1
With the use of dummy events, we can drop virtgpu specific behavior. Fixes: cd7f5ca33585 ("drm/virtio: implement context init: add virtio_gpu_fence_event") Reported-by: Daniel Vetter <[email protected]> Signed-off-by: Gurchetan Singh <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
2021-11-29drm/virtgpu api: define a dummy fence signaled eventGurchetan Singh3-2/+8
The current virtgpu implementation of poll(..) drops events when VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK is enabled (otherwise it's like a normal DRM driver). This is because paravirtualized userspaces receives responses in a buffer of type BLOB_MEM_GUEST, not by read(..). To be in line with other DRM drivers and avoid specialized behavior, it is possible to define a dummy event for virtgpu. Paravirtualized userspace will now have to call read(..) on the DRM fd to receive the dummy event. Fixes: b10790434cf2 ("drm/virtgpu api: create context init feature") Reported-by: Daniel Vetter <[email protected]> Signed-off-by: Gurchetan Singh <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
2021-11-29i2c: cbus-gpio: set atomic transfer callbackAaro Koskinen1-2/+3
CBUS transfers have always been atomic, but after commit 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") we started to see warnings during e.g. poweroff as the atomic callback is not explicitly set. Fix that. Fixes the following WARNING seen during Nokia N810 power down: [ 786.570617] reboot: Power down [ 786.573913] ------------[ cut here ]------------ [ 786.578826] WARNING: CPU: 0 PID: 672 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x110 [ 786.587799] No atomic I2C transfer handler for 'i2c-2' Fixes: 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers") Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2021-11-29s390/pci: move pseudo-MMIO to prevent MIO overlapNiklas Schnelle1-3/+4
When running without MIO support, with pci=nomio or for devices which are not MIO-capable the zPCI subsystem generates pseudo-MMIO addresses to allow access to PCI BARs via MMIO based Linux APIs even though the platform uses function handles and BAR numbers. This is done by stashing an index into our global IOMAP array which contains the function handle in the 16 most significant bits of the addresses returned by ioremap() always setting the most significant bit. On the other hand the MIO addresses assigned by the platform for use, while requiring special instructions, allow PCI access with virtually mapped physical addresses. Now the problem is that these MIO addresses and our own pseudo-MMIO addresses may overlap, while functionally this would not be a problem by itself this overlap is detected by common code as both address types are added as resources in the iomem_resource tree. This leads to the overlapping resource claim of either the MIO capable or non-MIO capable devices with being rejected. Since PCI is tightly coupled to the use of the iomem_resource tree, see for example the code for request_mem_region(), we can't reasonably get rid of the overlap being detected by keeping our pseudo-MMIO addresses out of the iomem_resource tree. Instead let's move the range used by our own pseudo-MMIO addresses by starting at (1UL << 62) and only using addresses below (1UL << 63) thus avoiding the range currently used for MIO addresses. Fixes: c7ff0e918a7c ("s390/pci: deal with devices that have no support for MIO instructions") Cc: [email protected] # 5.3+ Reviewed-by: Pierre Morel <[email protected]> Signed-off-by: Niklas Schnelle <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2021-11-29ALSA: hda/cs8409: Set PMSG_ON earlier inside cs8409 driverStefan Binding2-0/+14
For cs8409, it is required to run Jack Detect on resume. Jack Detect on cs8409+cs42l42 requires an interrupt from cs42l42 to be sent to cs8409 which is propogated to the driver via an unsolicited event. However, the hda_codec drops unsolicited events if the power_state is not set to PMSG_ON. Which is set at the end of the resume call. This means there is a race condition between setting power_state to PMSG_ON and receiving the interrupt. To solve this, we can add an API to set the power_state earlier and call that before we start Jack Detect. This does not cause issues, since we know inside our driver that we are already initialized, and ready to handle the unsolicited events. Signed-off-by: Stefan Binding <[email protected]> Signed-off-by: Vitaly Rodionov <[email protected]> Cc: <[email protected]> # v5.15+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-11-28Linux 5.16-rc3Linus Torvalds1-1/+1
2021-11-28Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds9-76/+9
Pull vhost,virtio,vdpa bugfixes from Michael Tsirkin: "Misc fixes all over the place. Revert of virtio used length validation series: the approach taken does not seem to work, breaking too many guests in the process. We'll need to do length validation using some other approach" [ This merge also ends up reverting commit f7a36b03a732 ("vsock/virtio: suppress used length validation"), which came in through the networking tree in the meantime, and was part of that whole used length validation series - Linus ] * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa_sim: avoid putting an uninitialized iova_domain vhost-vdpa: clean irqs before reseting vdpa device virtio-blk: modify the value type of num in virtio_queue_rq() vhost/vsock: cleanup removing `len` variable vhost/vsock: fix incorrect used length reported to the guest Revert "virtio_ring: validate used buffer length" Revert "virtio-net: don't let virtio core to validate used length" Revert "virtio-blk: don't let virtio core to validate used length" Revert "virtio-scsi: don't let virtio core to validate used buffer length"
2021-11-28Merge tag 'x86-urgent-2021-11-28' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build fix from Thomas Gleixner: "A single fix for a missing __init annotation of prepare_command_line()" * tag 'x86-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Mark prepare_command_line() __init
2021-11-28Merge tag 'sched-urgent-2021-11-28' of ↵Linus Torvalds2-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single scheduler fix to ensure that there is no stale KASAN shadow state left on the idle task's stack when a CPU is brought up after it was brought down before" * tag 'sched-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/scs: Reset task stack state in bringup_cpu()
2021-11-28Merge tag 'perf-urgent-2021-11-28' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Thomas Gleixner: "A single fix for perf to prevent it from sending SIGTRAP to another task from a trace point event as it's not possible to deliver a synchronous signal to a different task from there" * tag 'perf-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Ignore sigtrap for tracepoints destined for other tasks
2021-11-28Merge tag 'locking-urgent-2021-11-28' of ↵Linus Torvalds1-93/+89
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Two regression fixes for reader writer semaphores: - Plug a race in the lock handoff which is caused by inconsistency of the reader and writer path and can lead to corruption of the underlying counter. - down_read_trylock() is suboptimal when the lock is contended and multiple readers trylock concurrently. That's due to the initial value being read non-atomically which results in at least two compare exchange loops. Making the initial readout atomic reduces this significantly. Whith 40 readers by 11% in a benchmark which enforces contention on mmap_sem" * tag 'locking-urgent-2021-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Optimize down_read_trylock() under highly contended case locking/rwsem: Make handoff bit handling more consistent
2021-11-28Merge tag 'trace-v5.16-rc2-3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull another tracing fix from Steven Rostedt: "Fix the fix of pid filtering The setting of the pid filtering flag tested the "trace only this pid" case twice, and ignored the "trace everything but this pid" case. The 5.15 kernel does things a little differently due to the new sparse pid mask introduced in 5.16, and as the bug was discovered running the 5.15 kernel, and the first fix was initially done for that kernel, that fix handled both cases (only pid and all but pid), but the forward port to 5.16 created this bug" * tag 'trace-v5.16-rc2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Test the 'Do not trace this pid' case in create event
2021-11-28Merge tag 'iommu-fixes-v5.16-rc2' of ↵Linus Torvalds5-17/+10
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Intel VT-d fixes: - Remove unused PASID_DISABLED - Fix RCU locking - Fix for the unmap_pages call-back - Rockchip RK3568 address mask fix - AMD IOMMUv2 log message clarification * tag 'iommu-fixes-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix unmap_pages support iommu/vt-d: Fix an unbalanced rcu_read_lock/rcu_read_unlock() iommu/rockchip: Fix PAGE_DESC_HI_MASKs for RK3568 iommu/amd: Clarify AMD IOMMUv2 initialization messages iommu/vt-d: Remove unused PASID_DISABLED
2021-11-27Merge tag '5.16-rc2-ksmbd-fixes' of git://git.samba.org/ksmbdLinus Torvalds2-18/+22
Pull ksmbd fixes from Steve French: "Five ksmbd server fixes, four of them for stable: - memleak fix - fix for default data stream on filesystems that don't support xattr - error logging fix - session setup fix - minor doc cleanup" * tag '5.16-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: fix memleak in get_file_stream_info() ksmbd: contain default data stream even if xattr is empty ksmbd: downgrade addition info error msg to debug in smb2_get_info_sec() docs: filesystem: cifs: ksmbd: Fix small layout issues ksmbd: Fix an error handling path in 'smb2_sess_setup()'
2021-11-27vmxnet3: Use generic Kconfig option for page size limitGuenter Roeck1-3/+1
Use the architecture independent Kconfig option PAGE_SIZE_LESS_THAN_64KB to indicate that VMXNET3 requires a page size smaller than 64kB. Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-11-27fs: ntfs: Limit NTFS_RW to page sizes smaller than 64kGuenter Roeck1-0/+1
NTFS_RW code allocates page size dependent arrays on the stack. This results in build failures if the page size is 64k or larger. fs/ntfs/aops.c: In function 'ntfs_write_mst_block': fs/ntfs/aops.c:1311:1: error: the frame size of 2240 bytes is larger than 2048 bytes Since commit f22969a66041 ("powerpc/64s: Default to 64K pages for 64 bit book3s") this affects ppc:allmodconfig builds, but other architectures supporting page sizes of 64k or larger are also affected. Increasing the maximum frame size for affected architectures just to silence this error does not really help. The frame size would have to be set to a really large value for 256k pages. Also, a large frame size could potentially result in stack overruns in this code and elsewhere and is therefore not desirable. Make NTFS_RW dependent on page sizes smaller than 64k instead. Signed-off-by: Guenter Roeck <[email protected]> Cc: Anton Altaparmakov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-11-27arch: Add generic Kconfig option indicating page size smaller than 64kGuenter Roeck1-0/+10
NTFS_RW and VMXNET3 require a page size smaller than 64kB. Add generic Kconfig option for use outside architecture code to avoid architecture specific Kconfig options in that code. Suggested-by: Michael Ellerman <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Cc: Anton Altaparmakov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-11-27tracing: Test the 'Do not trace this pid' case in create eventSteven Rostedt (VMware)1-1/+1
When creating a new event (via a module, kprobe, eprobe, etc), the descriptors that are created must add flags for pid filtering if an instance has pid filtering enabled, as the flags are used at the time the event is executed to know if pid filtering should be done or not. The "Only trace this pid" case was added, but a cut and paste error made that case checked twice, instead of checking the "Trace all but this pid" case. Link: https://lore.kernel.org/all/[email protected]/ Fixes: 6cb206508b62 ("tracing: Check pid filtering when creating events") Reported-by: kernel test robot <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-11-27Merge tag 'xfs-5.16-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds3-34/+8
Pull xfs fixes from Darrick Wong: "Fixes for a resource leak and a build robot complaint about totally dead code: - Fix buffer resource leak that could lead to livelock on corrupt fs. - Remove unused function xfs_inew_wait to shut up the build robots" * tag 'xfs-5.16-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: remove xfs_inew_wait xfs: Fix the free logic of state in xfs_attr_node_hasname
2021-11-27Merge tag 'iomap-5.16-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-10/+16
Pull iomap fixes from Darrick Wong: "A single iomap bug fix and a cleanup for 5.16-rc2. The bug fix changes how iomap deals with reading from an inline data region -- whereas the current code (incorrectly) lets the iomap read iter try for more bytes after reading the inline region (which zeroes the rest of the page!) and hopes the next iteration terminates, we surveyed the inlinedata implementations and realized that all inlinedata implementations also require that the inlinedata region end at EOF, so we can simply terminate the read. The second patch documents these assumptions in the code so that they're not subtle implications anymore, and cleans up some of the grosser parts of that function. Summary: - Fix an accounting problem where unaligned inline data reads can run off the end of the read iomap iterator. iomap has historically required that inline data mappings only exist at the end of a file, though this wasn't documented anywhere. - Document iomap_read_inline_data and change its return type to be appropriate for the information that it's actually returning" * tag 'iomap-5.16-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: iomap_read_inline_data cleanup iomap: Fix inline extent handling in iomap_readpage
2021-11-27Merge tag 'trace-v5.16-rc2-2' of ↵Linus Torvalds2-6/+30
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Two fixes to event pid filtering: - Make sure newly created events reflect the current state of pid filtering - Take pid filtering into account when recording trigger events. (Also clean up the if statement to be cleaner)" * tag 'trace-v5.16-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix pid filtering when triggers are attached tracing: Check pid filtering when creating events
2021-11-27Merge tag 'io_uring-5.16-2021-11-27' of git://git.kernel.dk/linux-blockLinus Torvalds1-23/+50
Pull more io_uring fixes from Jens Axboe: "The locking fixup that was applied earlier this rc has both a deadlock and IRQ safety issue, let's get that ironed out before -rc3. This contains: - Link traversal locking fix (Pavel) - Cancelation fix (Pavel) - Relocate cond_resched() for huge buffer chain freeing, avoiding a softlockup warning (Ye) - Fix timespec validation (Ye)" * tag 'io_uring-5.16-2021-11-27' of git://git.kernel.dk/linux-block: io_uring: Fix undefined-behaviour in io_issue_sqe io_uring: fix soft lockup when call __io_remove_buffers io_uring: fix link traversal locking io_uring: fail cancellation for EXITING tasks
2021-11-27Merge tag 'block-5.16-2021-11-27' of git://git.kernel.dk/linux-blockLinus Torvalds2-1/+4
Pull more block fixes from Jens Axboe: "Turns out that the flushing out of pending fixes before the Thanksgiving break didn't quite work out in terms of timing, so here's a followup set of fixes: - rq_qos_done() should be called regardless of whether or not we're the final put of the request, it's not related to the freeing of the state. This fixes an IO stall with wbt that a few users have reported, a regression in this release. - Only define zram_wb_devops if it's used, fixing a compilation warning for some compilers" * tag 'block-5.16-2021-11-27' of git://git.kernel.dk/linux-block: zram: only make zram_wb_devops for CONFIG_ZRAM_WRITEBACK block: call rq_qos_done() before ref check in batch completions
2021-11-27Merge tag 'scsi-fixes' of ↵Linus Torvalds10-39/+108
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Twelve fixes, eleven in drivers (target, qla2xx, scsi_debug, mpt3sas, ufs). The core fix is a minor correction to the previous state update fix for the iscsi daemons" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_debug: Zero clear zones at reset write pointer scsi: core: sysfs: Fix setting device state to SDEV_RUNNING scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select() scsi: target: configfs: Delete unnecessary checks for NULL scsi: target: core: Use RCU helpers for INQUIRY t10_alua_tg_pt_gp scsi: mpt3sas: Fix incorrect system timestamp scsi: mpt3sas: Fix system going into read-only mode scsi: mpt3sas: Fix kernel panic during drive powercycle test scsi: ufs: ufs-mediatek: Add put_device() after of_find_device_by_node() scsi: scsi_debug: Fix type in min_t to avoid stack OOB scsi: qla2xxx: edif: Fix off by one bug in qla_edif_app_getfcinfo() scsi: ufs: ufshpb: Fix warning in ufshpb_set_hpb_read_to_upiu()
2021-11-27Merge tag 'nfs-for-5.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds7-9/+16
Pull NFS client fixes from Trond Myklebust: "Highlights include: Stable fixes: - NFSv42: Fix pagecache invalidation after COPY/CLONE Bugfixes: - NFSv42: Don't fail clone() just because the server failed to return post-op attributes - SUNRPC: use different lockdep keys for INET6 and LOCAL - NFSv4.1: handle NFS4ERR_NOSPC from CREATE_SESSION - SUNRPC: fix header include guard in trace header" * tag 'nfs-for-5.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: use different lock keys for INET6 and LOCAL sunrpc: fix header include guard in trace header NFSv4.1: handle NFS4ERR_NOSPC by CREATE_SESSION NFSv42: Fix pagecache invalidation after COPY/CLONE NFS: Add a tracepoint to show the results of nfs_set_cache_invalid() NFSv42: Don't fail clone() unless the OP_CLONE operation failed
2021-11-27Merge tag 'erofs-for-5.16-rc3-fixes' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fix from Gao Xiang: "Fix an ABBA deadlock introduced by XArray conversion" * tag 'erofs-for-5.16-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: fix deadlock when shrink erofs slab
2021-11-27Merge tag 'powerpc-5.16-3' of ↵Linus Torvalds2-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fix KVM using a Power9 instruction on earlier CPUs, which could lead to the host SLB being incorrectly invalidated and a subsequent host crash. Fix kernel hardlockup on vmap stack overflow on 32-bit. Thanks to Christophe Leroy, Nicholas Piggin, and Fabiano Rosas" * tag 'powerpc-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Fix hardlockup on vmap stack overflow KVM: PPC: Book3S HV: Prevent POWER7/8 TLB flush flushing SLB
2021-11-27Merge tag 'mips-fixes_5.16_2' of ↵Linus Torvalds4-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - build fix for ZSTD enabled configs - fix for preempt warning - fix for loongson FTLB detection - fix for page table level selection * tag 'mips-fixes_5.16_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: use 3-level pgtable for 64KB page size on MIPS_VA_BITS_48 MIPS: loongson64: fix FTLB configuration MIPS: Fix using smp_processor_id() in preemptible in show_cpuinfo() MIPS: boot/compressed/: add __ashldi3 to target for ZSTD compression
2021-11-27io_uring: Fix undefined-behaviour in io_issue_sqeYe Bin1-0/+3
We got issue as follows: ================================================================================ UBSAN: Undefined behaviour in ./include/linux/ktime.h:42:14 signed integer overflow: -4966321760114568020 * 1000000000 cannot be represented in type 'long long int' CPU: 1 PID: 2186 Comm: syz-executor.2 Not tainted 4.19.90+ #12 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x170/0x1dc lib/dump_stack.c:118 ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161 handle_overflow+0x188/0x1dc lib/ubsan.c:192 __ubsan_handle_mul_overflow+0x34/0x44 lib/ubsan.c:213 ktime_set include/linux/ktime.h:42 [inline] timespec64_to_ktime include/linux/ktime.h:78 [inline] io_timeout fs/io_uring.c:5153 [inline] io_issue_sqe+0x42c8/0x4550 fs/io_uring.c:5599 __io_queue_sqe+0x1b0/0xbc0 fs/io_uring.c:5988 io_queue_sqe+0x1ac/0x248 fs/io_uring.c:6067 io_submit_sqe fs/io_uring.c:6137 [inline] io_submit_sqes+0xed8/0x1c88 fs/io_uring.c:6331 __do_sys_io_uring_enter fs/io_uring.c:8170 [inline] __se_sys_io_uring_enter fs/io_uring.c:8129 [inline] __arm64_sys_io_uring_enter+0x490/0x980 fs/io_uring.c:8129 invoke_syscall arch/arm64/kernel/syscall.c:53 [inline] el0_svc_common+0x374/0x570 arch/arm64/kernel/syscall.c:121 el0_svc_handler+0x190/0x260 arch/arm64/kernel/syscall.c:190 el0_svc+0x10/0x218 arch/arm64/kernel/entry.S:1017 ================================================================================ As ktime_set only judge 'secs' if big than KTIME_SEC_MAX, but if we pass negative value maybe lead to overflow. To address this issue, we must check if 'sec' is negative. Signed-off-by: Ye Bin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-11-27io_uring: fix soft lockup when call __io_remove_buffersYe Bin1-3/+2
I got issue as follows: [ 567.094140] __io_remove_buffers: [1]start ctx=0xffff8881067bf000 bgid=65533 buf=0xffff8881fefe1680 [ 594.360799] watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [kworker/u32:5:108] [ 594.364987] Modules linked in: [ 594.365405] irq event stamp: 604180238 [ 594.365906] hardirqs last enabled at (604180237): [<ffffffff93fec9bd>] _raw_spin_unlock_irqrestore+0x2d/0x50 [ 594.367181] hardirqs last disabled at (604180238): [<ffffffff93fbbadb>] sysvec_apic_timer_interrupt+0xb/0xc0 [ 594.368420] softirqs last enabled at (569080666): [<ffffffff94200654>] __do_softirq+0x654/0xa9e [ 594.369551] softirqs last disabled at (569080575): [<ffffffff913e1d6a>] irq_exit_rcu+0x1ca/0x250 [ 594.370692] CPU: 2 PID: 108 Comm: kworker/u32:5 Tainted: G L 5.15.0-next-20211112+ #88 [ 594.371891] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 594.373604] Workqueue: events_unbound io_ring_exit_work [ 594.374303] RIP: 0010:_raw_spin_unlock_irqrestore+0x33/0x50 [ 594.375037] Code: 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 55 f5 55 fd 48 89 ef e8 ed a7 56 fd 80 e7 02 74 06 e8 43 13 7b fd fb bf 01 00 00 00 <e8> f8 78 474 [ 594.377433] RSP: 0018:ffff888101587a70 EFLAGS: 00000202 [ 594.378120] RAX: 0000000024030f0d RBX: 0000000000000246 RCX: 1ffffffff2f09106 [ 594.379053] RDX: 0000000000000000 RSI: ffffffff9449f0e0 RDI: 0000000000000001 [ 594.379991] RBP: ffffffff9586cdc0 R08: 0000000000000001 R09: fffffbfff2effcab [ 594.380923] R10: ffffffff977fe557 R11: fffffbfff2effcaa R12: ffff8881b8f3def0 [ 594.381858] R13: 0000000000000246 R14: ffff888153a8b070 R15: 0000000000000000 [ 594.382787] FS: 0000000000000000(0000) GS:ffff888399c00000(0000) knlGS:0000000000000000 [ 594.383851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 594.384602] CR2: 00007fcbe71d2000 CR3: 00000000b4216000 CR4: 00000000000006e0 [ 594.385540] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 594.386474] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 594.387403] Call Trace: [ 594.387738] <TASK> [ 594.388042] find_and_remove_object+0x118/0x160 [ 594.389321] delete_object_full+0xc/0x20 [ 594.389852] kfree+0x193/0x470 [ 594.390275] __io_remove_buffers.part.0+0xed/0x147 [ 594.390931] io_ring_ctx_free+0x342/0x6a2 [ 594.392159] io_ring_exit_work+0x41e/0x486 [ 594.396419] process_one_work+0x906/0x15a0 [ 594.399185] worker_thread+0x8b/0xd80 [ 594.400259] kthread+0x3bf/0x4a0 [ 594.401847] ret_from_fork+0x22/0x30 [ 594.402343] </TASK> Message from syslogd@localhost at Nov 13 09:09:54 ... kernel:watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [kworker/u32:5:108] [ 596.793660] __io_remove_buffers: [2099199]start ctx=0xffff8881067bf000 bgid=65533 buf=0xffff8881fefe1680 We can reproduce this issue by follow syzkaller log: r0 = syz_io_uring_setup(0x401, &(0x7f0000000300), &(0x7f0000003000/0x2000)=nil, &(0x7f0000ff8000/0x4000)=nil, &(0x7f0000000280)=<r1=>0x0, &(0x7f0000000380)=<r2=>0x0) sendmsg$ETHTOOL_MSG_FEATURES_SET(0xffffffffffffffff, &(0x7f0000003080)={0x0, 0x0, &(0x7f0000003040)={&(0x7f0000000040)=ANY=[], 0x18}}, 0x0) syz_io_uring_submit(r1, r2, &(0x7f0000000240)=@IORING_OP_PROVIDE_BUFFERS={0x1f, 0x5, 0x0, 0x401, 0x1, 0x0, 0x100, 0x0, 0x1, {0xfffd}}, 0x0) io_uring_enter(r0, 0x3a2d, 0x0, 0x0, 0x0, 0x0) The reason above issue is 'buf->list' has 2,100,000 nodes, occupied cpu lead to soft lockup. To solve this issue, we need add schedule point when do while loop in '__io_remove_buffers'. After add schedule point we do regression, get follow data. [ 240.141864] __io_remove_buffers: [1]start ctx=0xffff888170603000 bgid=65533 buf=0xffff8881116fcb00 [ 268.408260] __io_remove_buffers: [1]start ctx=0xffff8881b92d2000 bgid=65533 buf=0xffff888130c83180 [ 275.899234] __io_remove_buffers: [2099199]start ctx=0xffff888170603000 bgid=65533 buf=0xffff8881116fcb00 [ 296.741404] __io_remove_buffers: [1]start ctx=0xffff8881b659c000 bgid=65533 buf=0xffff8881010fe380 [ 305.090059] __io_remove_buffers: [2099199]start ctx=0xffff8881b92d2000 bgid=65533 buf=0xffff888130c83180 [ 325.415746] __io_remove_buffers: [1]start ctx=0xffff8881b92d1000 bgid=65533 buf=0xffff8881a17d8f00 [ 333.160318] __io_remove_buffers: [2099199]start ctx=0xffff8881b659c000 bgid=65533 buf=0xffff8881010fe380 ... Fixes:8bab4c09f24e("io_uring: allow conditional reschedule for intensive iterators") Signed-off-by: Ye Bin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2021-11-26tracing: Fix pid filtering when triggers are attachedSteven Rostedt (VMware)1-6/+18
If a event is filtered by pid and a trigger that requires processing of the event to happen is a attached to the event, the discard portion does not take the pid filtering into account, and the event will then be recorded when it should not have been. Cc: [email protected] Fixes: 3fdaf80f4a836 ("tracing: Implement event pid filtering") Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-11-26iommu/vt-d: Fix unmap_pages supportAlex Williamson1-4/+2
When supporting only the .map and .unmap callbacks of iommu_ops, the IOMMU driver can make assumptions about the size and alignment used for mappings based on the driver provided pgsize_bitmap. VT-d previously used essentially PAGE_MASK for this bitmap as any power of two mapping was acceptably filled by native page sizes. However, with the .map_pages and .unmap_pages interface we're now getting page-size and count arguments. If we simply combine these as (page-size * count) and make use of the previous map/unmap functions internally, any size and alignment assumptions are very different. As an example, a given vfio device assignment VM will often create a 4MB mapping at IOVA pfn [0x3fe00 - 0x401ff]. On a system that does not support IOMMU super pages, the unmap_pages interface will ask to unmap 1024 4KB pages at the base IOVA. dma_pte_clear_level() will recurse down to level 2 of the page table where the first half of the pfn range exactly matches the entire pte level. We clear the pte, increment the pfn by the level size, but (oops) the next pte is on a new page, so we exit the loop an pop back up a level. When we then update the pfn based on that higher level, we seem to assume that the previous pfn value was at the start of the level. In this case the level size is 256K pfns, which we add to the base pfn and get a results of 0x7fe00, which is clearly greater than 0x401ff, so we're done. Meanwhile we never cleared the ptes for the remainder of the range. When the VM remaps this range, we're overwriting valid ptes and the VT-d driver complains loudly, as reported by the user report linked below. The fix for this seems relatively simple, if each iteration of the loop in dma_pte_clear_level() is assumed to clear to the end of the level pte page, then our next pfn should be calculated from level_pfn rather than our working pfn. Fixes: 3f34f1259776 ("iommu/vt-d: Implement map/unmap_pages() iommu_ops callback") Reported-by: Ajay Garg <[email protected]> Signed-off-by: Alex Williamson <[email protected]> Tested-by: Giovanni Cabiddu <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/r/163659074748.1617923.12716161410774184024.stgit@omen Signed-off-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2021-11-26iommu/vt-d: Fix an unbalanced rcu_read_lock/rcu_read_unlock()Christophe JAILLET1-2/+3
If we return -EOPNOTSUPP, the rcu lock remains lock. This is spurious. Go through the end of the function instead. This way, the missing 'rcu_read_unlock()' is called. Fixes: 7afd7f6aa21a ("iommu/vt-d: Check FL and SL capability sanity in scalable mode") Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/40cc077ca5f543614eab2a10e84d29dd190273f6.1636217517.git.christophe.jaillet@wanadoo.fr Signed-off-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2021-11-26iommu/rockchip: Fix PAGE_DESC_HI_MASKs for RK3568Alex Bee1-2/+2
With the submission of iommu driver for RK3568 a subtle bug was introduced: PAGE_DESC_HI_MASK1 and PAGE_DESC_HI_MASK2 have to be the other way arround - that leads to random errors, especially when addresses beyond 32 bit are used. Fix it. Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2") Signed-off-by: Alex Bee <[email protected]> Tested-by: Peter Geis <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Tested-by: Dan Johansen <[email protected]> Reviewed-by: Benjamin Gaignard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2021-11-26iommu/amd: Clarify AMD IOMMUv2 initialization messagesJoerg Roedel1-3/+3
The messages printed on the initialization of the AMD IOMMUv2 driver have caused some confusion in the past. Clarify the messages to lower the confusion in the future. Cc: [email protected] Signed-off-by: Joerg Roedel <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.