aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-02-26selftests: mptcp: explicitly trigger the listener diag code-pathPaolo Abeni1-1/+29
The mptcp diag interface already experienced a few locking bugs that lockdep and appropriate coverage have detected in advance. Let's add a test-case triggering the relevant code path, to prevent similar issues in the future. Be careful to cope with very slow environments. Note that we don't need an explicit timeout on the mptcp_connect subprocess to cope with eventual bug/hang-up as the final cleanup terminating the child processes will take care of that. Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-10-162e87e48497@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-26mptcp: fix possible deadlock in subflow diagPaolo Abeni1-0/+3
Syzbot and Eric reported a lockdep splat in the subflow diag: WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00212-g40b9385dd8e6 #0 Not tainted syz-executor.2/24141 is trying to acquire lock: ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 but task is already holding lock: ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: inet_diag_dump_icsk+0x39f/0x1f80 net/ipv4/inet_diag.c:1038 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&h->lhash2[i].lock){+.+.}-{2:2}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __inet_hash+0x335/0xbe0 net/ipv4/inet_hashtables.c:743 inet_csk_listen_start+0x23a/0x320 net/ipv4/inet_connection_sock.c:1261 __inet_listen_sk+0x2a2/0x770 net/ipv4/af_inet.c:217 inet_listen+0xa3/0x110 net/ipv4/af_inet.c:239 rds_tcp_listen_init+0x3fd/0x5a0 net/rds/tcp_listen.c:316 rds_tcp_init_net+0x141/0x320 net/rds/tcp.c:577 ops_init+0x352/0x610 net/core/net_namespace.c:136 __register_pernet_operations net/core/net_namespace.c:1214 [inline] register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1283 register_pernet_device+0x33/0x80 net/core/net_namespace.c:1370 rds_tcp_init+0x62/0xd0 net/rds/tcp.c:735 do_one_initcall+0x238/0x830 init/main.c:1236 do_initcall_level+0x157/0x210 init/main.c:1298 do_initcalls+0x3f/0x80 init/main.c:1314 kernel_init_freeable+0x42f/0x5d0 init/main.c:1551 kernel_init+0x1d/0x2a0 init/main.c:1441 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242 -> #0 (k-sk_lock-AF_INET6){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_fast include/net/sock.h:1723 [inline] subflow_get_info+0x166/0xd20 net/mptcp/diag.c:28 tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 inet_sk_diag_fill+0x10ed/0x1e00 net/ipv4/inet_diag.c:345 inet_diag_dump_icsk+0x55b/0x1f80 net/ipv4/inet_diag.c:1061 __inet_diag_dump+0x211/0x3a0 net/ipv4/inet_diag.c:1263 inet_diag_dump_compat+0x1c1/0x2d0 net/ipv4/inet_diag.c:1371 netlink_dump+0x59b/0xc80 net/netlink/af_netlink.c:2264 __netlink_dump_start+0x5df/0x790 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:338 [inline] inet_diag_rcv_msg_compat+0x209/0x4c0 net/ipv4/inet_diag.c:1405 sock_diag_rcv_msg+0xe7/0x410 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 As noted by Eric we can break the lock dependency chain avoid dumping any extended info for the mptcp subflow listener: nothing actually useful is presented there. Fixes: b8adb69a7d29 ("mptcp: fix lockless access in subflow ULP diag") Cc: [email protected] Reported-by: Eric Dumazet <[email protected]> Closes: https://lore.kernel.org/netdev/CANn89iJ=Oecw6OZDwmSYc9HJKQ_G32uN11L+oUcMu+TOD5Xiaw@mail.gmail.com/ Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-9-162e87e48497@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-26mptcp: fix double-free on socket dismantleDavide Caratti1-0/+49
when MPTCP server accepts an incoming connection, it clones its listener socket. However, the pointer to 'inet_opt' for the new socket has the same value as the original one: as a consequence, on program exit it's possible to observe the following splat: BUG: KASAN: double-free in inet_sock_destruct+0x54f/0x8b0 Free of addr ffff888485950880 by task swapper/25/0 CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Not tainted 6.8.0-rc1+ #609 Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013 Call Trace: <IRQ> dump_stack_lvl+0x32/0x50 print_report+0xca/0x620 kasan_report_invalid_free+0x64/0x90 __kasan_slab_free+0x1aa/0x1f0 kfree+0xed/0x2e0 inet_sock_destruct+0x54f/0x8b0 __sk_destruct+0x48/0x5b0 rcu_do_batch+0x34e/0xd90 rcu_core+0x559/0xac0 __do_softirq+0x183/0x5a4 irq_exit_rcu+0x12d/0x170 sysvec_apic_timer_interrupt+0x6b/0x80 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x16/0x20 RIP: 0010:cpuidle_enter_state+0x175/0x300 Code: 30 00 0f 84 1f 01 00 00 83 e8 01 83 f8 ff 75 e5 48 83 c4 18 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc fb 45 85 ed <0f> 89 60 ff ff ff 48 c1 e5 06 48 c7 43 18 00 00 00 00 48 83 44 2b RSP: 0018:ffff888481cf7d90 EFLAGS: 00000202 RAX: 0000000000000000 RBX: ffff88887facddc8 RCX: 0000000000000000 RDX: 1ffff1110ff588b1 RSI: 0000000000000019 RDI: ffff88887fac4588 RBP: 0000000000000004 R08: 0000000000000002 R09: 0000000000043080 R10: 0009b02ea273363f R11: ffff88887fabf42b R12: ffffffff932592e0 R13: 0000000000000004 R14: 0000000000000000 R15: 00000022c880ec80 cpuidle_enter+0x4a/0xa0 do_idle+0x310/0x410 cpu_startup_entry+0x51/0x60 start_secondary+0x211/0x270 secondary_startup_64_no_verify+0x184/0x18b </TASK> Allocated by task 6853: kasan_save_stack+0x1c/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 __kmalloc+0x1eb/0x450 cipso_v4_sock_setattr+0x96/0x360 netlbl_sock_setattr+0x132/0x1f0 selinux_netlbl_socket_post_create+0x6c/0x110 selinux_socket_post_create+0x37b/0x7f0 security_socket_post_create+0x63/0xb0 __sock_create+0x305/0x450 __sys_socket_create.part.23+0xbd/0x130 __sys_socket+0x37/0xb0 __x64_sys_socket+0x6f/0xb0 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Freed by task 6858: kasan_save_stack+0x1c/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x12c/0x1f0 kfree+0xed/0x2e0 inet_sock_destruct+0x54f/0x8b0 __sk_destruct+0x48/0x5b0 subflow_ulp_release+0x1f0/0x250 tcp_cleanup_ulp+0x6e/0x110 tcp_v4_destroy_sock+0x5a/0x3a0 inet_csk_destroy_sock+0x135/0x390 tcp_fin+0x416/0x5c0 tcp_data_queue+0x1bc8/0x4310 tcp_rcv_state_process+0x15a3/0x47b0 tcp_v4_do_rcv+0x2c1/0x990 tcp_v4_rcv+0x41fb/0x5ed0 ip_protocol_deliver_rcu+0x6d/0x9f0 ip_local_deliver_finish+0x278/0x360 ip_local_deliver+0x182/0x2c0 ip_rcv+0xb5/0x1c0 __netif_receive_skb_one_core+0x16e/0x1b0 process_backlog+0x1e3/0x650 __napi_poll+0xa6/0x500 net_rx_action+0x740/0xbb0 __do_softirq+0x183/0x5a4 The buggy address belongs to the object at ffff888485950880 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes inside of 64-byte region [ffff888485950880, ffff8884859508c0) The buggy address belongs to the physical page: page:0000000056d1e95e refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888485950700 pfn:0x485950 flags: 0x57ffffc0000800(slab|node=1|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0057ffffc0000800 ffff88810004c640 ffffea00121b8ac0 dead000000000006 raw: ffff888485950700 0000000000200019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888485950780: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff888485950800: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff888485950880: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff888485950900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff888485950980: 00 00 00 00 00 01 fc fc fc fc fc fc fc fc fc fc Something similar (a refcount underflow) happens with CALIPSO/IPv6. Fix this by duplicating IP / IPv6 options after clone, so that ip{,6}_sock_destruct() doesn't end up freeing the same memory area twice. Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections") Cc: [email protected] Signed-off-by: Davide Caratti <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-8-162e87e48497@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-26selftests: mptcp: join: add ss mptcp support checkGeliang Tang1-0/+5
Commands 'ss -M' are used in script mptcp_join.sh to display only MPTCP sockets. So it must be checked if ss tool supports MPTCP in this script. Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases") Cc: [email protected] Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-7-162e87e48497@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-26mptcp: fix potential wake-up event lossPaolo Abeni1-10/+11
After the blamed commit below, the send buffer auto-tuning can happen after that the mptcp_propagate_sndbuf() completes - via the delegated action infrastructure. We must check for write space even after such change or we risk missing the wake-up event. Fixes: 8005184fd1ca ("mptcp: refactor sndbuf auto-tuning") Cc: [email protected] Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-6-162e87e48497@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-26mptcp: fix snd_wnd initialization for passive socketPaolo Abeni1-1/+1
Such value should be inherited from the first subflow, but passive sockets always used 'rsk_rcv_wnd'. Fixes: 6f8a612a33e4 ("mptcp: keep track of advertised windows right edge") Cc: [email protected] Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-5-162e87e48497@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-26mptcp: push at DSS boundariesPaolo Abeni1-0/+1
when inserting not contiguous data in the subflow write queue, the protocol creates a new skb and prevent the TCP stack from merging it later with already queued skbs by setting the EOR marker. Still no push flag is explicitly set at the end of previous GSO packet, making the aggregation on the receiver side sub-optimal - and packetdrill self-tests less predictable. Explicitly mark the end of not contiguous DSS with the push flag. Fixes: 6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets") Cc: [email protected] Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-4-162e87e48497@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-26mptcp: avoid printing warning once on client sideMatthieu Baerts (NGI0)1-1/+1
After the 'Fixes' commit mentioned below, the client side might print the following warning once when a subflow is fully established at the reception of any valid additional ack: MPTCP: bogus mpc option on established client sk That's a normal situation, and no warning should be printed for that. We can then skip the check when the label is used. Fixes: e4a0fa47e816 ("mptcp: corner case locking for rx path fields initialization") Cc: [email protected] Suggested-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-3-162e87e48497@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-26selftests: mptcp: rm subflow with v4/v4mapped addrGeliang Tang2-14/+18
Now both a v4 address and a v4-mapped address are supported when destroying a userspace pm subflow, this patch adds a second subflow to "userspace pm add & remove address" test, and two subflows could be removed two different ways, one with the v4mapped and one with v4. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387 Fixes: 48d73f609dcc ("selftests: mptcp: update userspace pm addr tests") Cc: [email protected] Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-2-162e87e48497@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-26mptcp: map v4 address to v6 when destroying subflowGeliang Tang1-0/+10
Address family of server side mismatches with that of client side, like in "userspace pm add & remove address" test: userspace_pm_add_addr $ns1 10.0.2.1 10 userspace_pm_rm_sf $ns1 "::ffff:10.0.2.1" $SUB_ESTABLISHED That's because on the server side, the family is set to AF_INET6 and the v4 address is mapped in a v6 one. This patch fixes this issue. In mptcp_pm_nl_subflow_destroy_doit(), before checking local address family with remote address family, map an IPv4 address to an IPv6 address if the pair is a v4-mapped address. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387 Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment") Cc: [email protected] Signed-off-by: Geliang Tang <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-1-162e87e48497@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-26dpll: rely on rcu for netdev_dpll_pin()Eric Dumazet5-12/+16
This fixes a possible UAF in if_nlmsg_size(), which can run without RTNL. Add rcu protection to "struct dpll_pin" Move netdev_dpll_pin() from netdevice.h to dpll.h to decrease name pollution. Note: This looks possible to no longer acquire RTNL in netdev_dpll_pin_assign() later in net-next. v2: do not force rcu_read_lock() in rtnl_dpll_pin_size() (Jiri Pirko) Fixes: 5f1842692880 ("netdev: expose DPLL pin handle for netdevice") Signed-off-by: Eric Dumazet <[email protected]> Cc: Arkadiusz Kubalewski <[email protected]> Cc: Vadim Fedorenko <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-26lan78xx: enable auto speed configuration for LAN7850 if no EEPROM is detectedOleksij Rempel1-1/+2
Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not present or not flashed, LAN7850 will fail to sync the speed detected by the PHY with the MAC. In case link speed is 100Mbit, it will accidentally work, otherwise no data can be transferred. Better way would be to implement link_up callback, or set auto speed configuration unconditionally. But this changes would be more intrusive. So, for now, set it only if no EEPROM is found. Fixes: e69647a19c87 ("lan78xx: Set ASD in MAC_CR when EEE is enabled.") Signed-off-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-26scsi: mpt3sas: Prevent sending diag_reset when the controller is readyRanjan Kumar1-1/+3
If the driver detects that the controller is not ready before sending the first IOC facts command, it will wait for a maximum of 10 seconds for it to become ready. However, even if the controller becomes ready within 10 seconds, the driver will still issue a diagnostic reset. Modify the driver to avoid sending a diag reset if the controller becomes ready within the 10-second wait time. Signed-off-by: Ranjan Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]>
2024-02-26scsi: mpi3mr: Reduce stack usage in mpi3mr_refresh_sas_ports()Arnd Bergmann1-1/+6
Doubling the number of PHYs also doubled the stack usage of this function, exceeding the 32-bit limit of 1024 bytes: drivers/scsi/mpi3mr/mpi3mr_transport.c: In function 'mpi3mr_refresh_sas_ports': drivers/scsi/mpi3mr/mpi3mr_transport.c:1818:1: error: the frame size of 1636 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Since the sas_io_unit_pg0 structure is already allocated dynamically, use the same method here. The size of the allocation can be smaller based on the actual number of phys now, so use this as an upper bound. Fixes: cb5b60894602 ("scsi: mpi3mr: Increase maximum number of PHYs to 64 from 32") Reviewed-by: Johannes Thumshirn <[email protected]> Cc: Sathya Prakash Veerichetty <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: John Garry <[email protected]> #build only Signed-off-by: Martin K. Petersen <[email protected]>
2024-02-26iommufd/selftest: Don't check map/unmap pairing with HUGE_PAGESJason Gunthorpe1-11/+18
Since MOCK_HUGE_PAGE_SIZE was introduced it allows the core code to invoke mock with large page sizes. This confuses the validation logic that checks that map/unmap are paired. This is because the page size computed for map is based on the physical address and in many cases will always be the base page size, however the entire range generated by iommufd will be passed to map. Randomly iommufd can see small groups of physically contiguous pages, (say 8k unaligned and grouped together), but that group crosses a huge page boundary. The map side will observe this as a contiguous run and mark it accordingly, but there is a chance the unmap side will end up terminating interior huge pages in the middle of that group and trigger a validation failure. Meaning the validation only works if the core code passes the iova/length directly from iommufd to mock. syzkaller randomly hits this with failures like: WARNING: CPU: 0 PID: 11568 at drivers/iommu/iommufd/selftest.c:461 mock_domain_unmap_pages+0x1c0/0x250 Modules linked in: CPU: 0 PID: 11568 Comm: syz-executor.0 Not tainted 6.8.0-rc3+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:mock_domain_unmap_pages+0x1c0/0x250 Code: 2b e8 94 37 0f ff 48 d1 eb 31 ff 48 b8 00 00 00 00 00 00 20 00 48 21 c3 48 89 de e8 aa 32 0f ff 48 85 db 75 07 e8 70 37 0f ff <0f> 0b e8 69 37 0f ff 31 f6 31 ff e8 90 32 0f ff e8 5b 37 0f ff 4c RSP: 0018:ffff88800e707490 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff822dfae6 RDX: ffff88800cf86400 RSI: ffffffff822dfaf0 RDI: 0000000000000007 RBP: ffff88800e7074d8 R08: 0000000000000000 R09: ffffed1001167c90 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000001500000 R13: 0000000000083000 R14: 0000000000000001 R15: 0000000000000800 FS: 0000555556048480(0000) GS:ffff88806d400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2dc23000 CR3: 0000000008cbb000 CR4: 0000000000350eb0 Call Trace: <TASK> __iommu_unmap+0x281/0x520 iommu_unmap+0xc9/0x180 iopt_area_unmap_domain_range+0x1b1/0x290 iopt_area_unpin_domain+0x590/0x800 __iopt_area_unfill_domain+0x22e/0x650 iopt_area_unfill_domain+0x47/0x60 iopt_unfill_domain+0x187/0x590 iopt_table_remove_domain+0x267/0x2d0 iommufd_hwpt_paging_destroy+0x1f1/0x370 iommufd_object_remove+0x2a3/0x490 iommufd_device_detach+0x23a/0x2c0 iommufd_selftest_destroy+0x7a/0xf0 iommufd_fops_release+0x1d3/0x340 __fput+0x272/0xb50 __fput_sync+0x4b/0x60 __x64_sys_close+0x8b/0x110 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x46/0x4e Do the simple thing and just disable the validation when the huge page tests are being run. Fixes: 7db521e23fe9 ("iommufd/selftest: Hugepage mock domain support") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Joao Martins <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2024-02-26iommufd: Fix protection fault in iommufd_test_syz_conv_iovaNicolin Chen1-6/+21
Syzkaller reported the following bug: general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7] Call Trace: lock_acquire lock_acquire+0x1ce/0x4f0 down_read+0x93/0x4a0 iommufd_test_syz_conv_iova+0x56/0x1f0 iommufd_test_access_rw.isra.0+0x2ec/0x390 iommufd_test+0x1058/0x1e30 iommufd_fops_ioctl+0x381/0x510 vfs_ioctl __do_sys_ioctl __se_sys_ioctl __x64_sys_ioctl+0x170/0x1e0 do_syscall_x64 do_syscall_64+0x71/0x140 This is because the new iommufd_access_change_ioas() sets access->ioas to NULL during its process, so the lock might be gone in a concurrent racing context. Fix this by doing the same access->ioas sanity as iommufd_access_rw() and iommufd_access_pin_pages() functions do. Cc: [email protected] Fixes: 9227da7816dd ("iommufd: Add iommufd_access_change_ioas(_id) helpers") Link: https://lore.kernel.org/r/3f1932acaf1dd494d404c04364d73ce8f57f3e5e.1708636627.git.nicolinc@nvidia.com Reported-by: Jason Gunthorpe <[email protected]> Signed-off-by: Nicolin Chen <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2024-02-26iommufd/selftest: Fix mock_dev_num bugNicolin Chen1-4/+9
Syzkaller reported the following bug: sysfs: cannot create duplicate filename '/devices/iommufd_mock4' Call Trace: sysfs_warn_dup+0x71/0x90 sysfs_create_dir_ns+0x1ee/0x260 ? sysfs_create_mount_point+0x80/0x80 ? spin_bug+0x1d0/0x1d0 ? do_raw_spin_unlock+0x54/0x220 kobject_add_internal+0x221/0x970 kobject_add+0x11c/0x1e0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? kset_create_and_add+0x160/0x160 ? kobject_put+0x5d/0x390 ? bus_get_dev_root+0x4a/0x60 ? kobject_put+0x5d/0x390 device_add+0x1d5/0x1550 ? __fw_devlink_link_to_consumers.isra.0+0x1f0/0x1f0 ? __init_waitqueue_head+0xcb/0x150 iommufd_test+0x462/0x3b60 ? lock_release+0x1fe/0x640 ? __might_fault+0x117/0x170 ? reacquire_held_locks+0x4b0/0x4b0 ? iommufd_selftest_destroy+0xd0/0xd0 ? __might_fault+0xbe/0x170 iommufd_fops_ioctl+0x256/0x350 ? iommufd_option+0x180/0x180 ? __lock_acquire+0x1755/0x45f0 __x64_sys_ioctl+0xa13/0x1640 The bug is triggered when Syzkaller created multiple mock devices but didn't destroy them in the same sequence, messing up the mock_dev_num counter. Replace the atomic with an mock_dev_ida. Cc: [email protected] Fixes: 23a1b46f15d5 ("iommufd/selftest: Make the mock iommu driver into a real driver") Link: https://lore.kernel.org/r/5af41d5af6d5c013cc51de01427abb8141b3587e.1708636627.git.nicolinc@nvidia.com Reported-by: Jason Gunthorpe <[email protected]> Signed-off-by: Nicolin Chen <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2024-02-26iommufd: Fix iopt_access_list_id overwrite bugNicolin Chen1-3/+6
Syzkaller reported the following WARN_ON: WARNING: CPU: 1 PID: 4738 at drivers/iommu/iommufd/io_pagetable.c:1360 Call Trace: iommufd_access_change_ioas+0x2fe/0x4e0 iommufd_access_destroy_object+0x50/0xb0 iommufd_object_remove+0x2a3/0x490 iommufd_object_destroy_user iommufd_access_destroy+0x71/0xb0 iommufd_test_staccess_release+0x89/0xd0 __fput+0x272/0xb50 __fput_sync+0x4b/0x60 __do_sys_close __se_sys_close __x64_sys_close+0x8b/0x110 do_syscall_x64 The mismatch between the access pointer in the list and the passed-in pointer is resulting from an overwrite of access->iopt_access_list_id, in iopt_add_access(). Called from iommufd_access_change_ioas() when xa_alloc() succeeds but iopt_calculate_iova_alignment() fails. Add a new_id in iopt_add_access() and only update iopt_access_list_id when returning successfully. Cc: [email protected] Fixes: 9227da7816dd ("iommufd: Add iommufd_access_change_ioas(_id) helpers") Link: https://lore.kernel.org/r/2dda7acb25b8562ec5f1310de828ef5da9ef509c.1708636627.git.nicolinc@nvidia.com Reported-by: Jason Gunthorpe <[email protected]> Suggested-by: Jason Gunthorpe <[email protected]> Signed-off-by: Nicolin Chen <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2024-02-26Merge tag 'mtd/fixes-for-6.8-rc7' of ↵Linus Torvalds3-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal: "Many NAND page layouts have been added to the Marvell NAND controller but could not be used in practice so they are being removed. Regarding the SPI-NAND area, Gigadevice chips were not using the right buffer for an ECC status check operation. Aside from these driver fixes, there is also a refcount fix in the MTD core nodes parsing logic" * tag 'mtd/fixes-for-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: marvell: fix layouts mtd: Fix possible refcounting issue when going through partition nodes mtd: spinand: gigadevice: Fix the get ecc status issue
2024-02-26Merge tag 'for-6.8-rc6-tag' of ↵Linus Torvalds6-22/+88
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A more fixes for recently reported or discovered problems: - fix corner case of send that would generate potentially large stream of zeros if there's a hole at the end of the file - fix chunk validation in zoned mode on conventional zones, it was possible to create chunks that would not be allowed on sequential zones - fix validation of dev-replace ioctl filenames - fix KCSAN warnings about access to block reserve struct members" * tag 'for-6.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix data race at btrfs_use_block_rsv() when accessing block reserve btrfs: fix data races when accessing the reserved amount of block reserves btrfs: send: don't issue unnecessary zero writes for trailing hole btrfs: dev-replace: properly validate device names btrfs: zoned: don't skip block group profile checks on conventional zones
2024-02-26ceph: switch to corrected encoding of max_xattr_size in mdsmapXiubo Li2-4/+9
The addition of bal_rank_mask with encoding version 17 was merged into ceph.git in Oct 2022 and made it into v18.2.0 release normally. A few months later, the much delayed addition of max_xattr_size got merged, also with encoding version 17, placed before bal_rank_mask in the encoding -- but it didn't make v18.2.0 release. The way this ended up being resolved on the MDS side is that bal_rank_mask will continue to be encoded in version 17 while max_xattr_size is now encoded in version 18. This does mean that older kernels will misdecode version 17, but this is also true for v18.2.0 and v18.2.1 clients in userspace. The best we can do is backport this adjustment -- see ceph.git commit 78abfeaff27fee343fb664db633de5b221699a73 for details. [ idryomov: changelog ] Cc: [email protected] Link: https://tracker.ceph.com/issues/64440 Fixes: d93231a6bc8a ("ceph: prevent a client from exceeding the MDS maximum xattr size") Signed-off-by: Xiubo Li <[email protected]> Reviewed-by: Patrick Donnelly <[email protected]> Reviewed-by: Venky Shankar <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2024-02-26fs/ntfs3: fix build without CONFIG_NTFS3_LZX_XPRESSMark O'Donovan1-1/+1
When CONFIG_NTFS3_LZX_XPRESS is not set then we get the following build error: fs/ntfs3/frecord.c:2460:16: error: unused variable ‘i_size’ Signed-off-by: Mark O'Donovan <[email protected]> Fixes: 4fd6c08a16d7 ("fs/ntfs3: Use i_size_read and i_size_write") Tested-by: Chris Clayton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2024-02-26landlock: Fix asymmetric private inodes referringMickaël Salaün1-2/+2
When linking or renaming a file, if only one of the source or destination directory is backed by an S_PRIVATE inode, then the related set of layer masks would be used as uninitialized by is_access_to_paths_allowed(). This would result to indeterministic access for one side instead of always being allowed. This bug could only be triggered with a mounted filesystem containing both S_PRIVATE and !S_PRIVATE inodes, which doesn't seem possible. The collect_domain_accesses() calls return early if is_nouser_or_private() returns false, which means that the directory's superblock has SB_NOUSER or its inode has S_PRIVATE. Because rename or link actions are only allowed on the same mounted filesystem, the superblock is always the same for both source and destination directories. However, it might be possible in theory to have an S_PRIVATE parent source inode with an !S_PRIVATE parent destination inode, or vice versa. To make sure this case is not an issue, explicitly initialized both set of layer masks to 0, which means to allow all actions on the related side. If at least on side has !S_PRIVATE, then collect_domain_accesses() and is_access_to_paths_allowed() check for the required access rights. Cc: Arnd Bergmann <[email protected]> Cc: Christian Brauner <[email protected]> Cc: Günther Noack <[email protected]> Cc: Jann Horn <[email protected]> Cc: Shervin Oloumi <[email protected]> Cc: [email protected] Fixes: b91c3e4ea756 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mickaël Salaün <[email protected]>
2024-02-26x86/cpu/intel: Detect TME keyid bits before setting MTRR mask registersPaolo Bonzini1-87/+91
MKTME repurposes the high bit of physical address to key id for encryption key and, even though MAXPHYADDR in CPUID[0x80000008] remains the same, the valid bits in the MTRR mask register are based on the reduced number of physical address bits. detect_tme() in arch/x86/kernel/cpu/intel.c detects TME and subtracts it from the total usable physical bits, but it is called too late. Move the call to early_init_intel() so that it is called in setup_arch(), before MTRRs are setup. This fixes boot on TDX-enabled systems, which until now only worked with "disable_mtrr_cleanup". Without the patch, the values written to the MTRRs mask registers were 52-bit wide (e.g. 0x000fffff_80000800) and the writes failed; with the patch, the values are 46-bit wide, which matches the reduced MAXPHYADDR that is shown in /proc/cpuinfo. Reported-by: Zixi Chen <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Cc:[email protected] Link: https://lore.kernel.org/all/20240131230902.1867092-3-pbonzini%40redhat.com
2024-02-26x86/cpu: Allow reducing x86_phys_bits during early_identify_cpu()Paolo Bonzini1-2/+2
In commit fbf6449f84bf ("x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach"), the initialization of c->x86_phys_bits was moved after this_cpu->c_early_init(c). This is incorrect because early_init_amd() expected to be able to reduce the value according to the contents of CPUID leaf 0x8000001f. Fortunately, the bug was negated by init_amd()'s call to early_init_amd(), which does reduce x86_phys_bits in the end. However, this is very late in the boot process and, most notably, the wrong value is used for x86_phys_bits when setting up MTRRs. To fix this, call get_cpu_address_sizes() as soon as X86_FEATURE_CPUID is set/cleared, and c->extended_cpuid_level is retrieved. Fixes: fbf6449f84bf ("x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach") Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Cc:[email protected] Link: https://lore.kernel.org/all/20240131230902.1867092-2-pbonzini%40redhat.com
2024-02-26fbcon: always restore the old font data in fbcon_do_set_font()Jiri Slaby (SUSE)1-5/+3
Commit a5a923038d70 (fbdev: fbcon: Properly revert changes when vc_resize() failed) started restoring old font data upon failure (of vc_resize()). But it performs so only for user fonts. It means that the "system"/internal fonts are not restored at all. So in result, the very first call to fbcon_do_set_font() performs no restore at all upon failing vc_resize(). This can be reproduced by Syzkaller to crash the system on the next invocation of font_get(). It's rather hard to hit the allocation failure in vc_resize() on the first font_set(), but not impossible. Esp. if fault injection is used to aid the execution/failure. It was demonstrated by Sirius: BUG: unable to handle page fault for address: fffffffffffffff8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD cb7b067 P4D cb7b067 PUD cb7d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8007 Comm: poc Not tainted 6.7.0-g9d1694dc91ce #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:fbcon_get_font+0x229/0x800 drivers/video/fbdev/core/fbcon.c:2286 Call Trace: <TASK> con_font_get drivers/tty/vt/vt.c:4558 [inline] con_font_op+0x1fc/0xf20 drivers/tty/vt/vt.c:4673 vt_k_ioctl drivers/tty/vt/vt_ioctl.c:474 [inline] vt_ioctl+0x632/0x2ec0 drivers/tty/vt/vt_ioctl.c:752 tty_ioctl+0x6f8/0x1570 drivers/tty/tty_io.c:2803 vfs_ioctl fs/ioctl.c:51 [inline] ... So restore the font data in any case, not only for user fonts. Note the later 'if' is now protected by 'old_userfont' and not 'old_data' as the latter is always set now. (And it is supposed to be non-NULL. Otherwise we would see the bug above again.) Signed-off-by: Jiri Slaby (SUSE) <[email protected]> Fixes: a5a923038d70 ("fbdev: fbcon: Properly revert changes when vc_resize() failed") Reported-and-tested-by: Ubisectech Sirius <[email protected]> Cc: Ubisectech Sirius <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Helge Deller <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-26ASoC: amd: yc: Add Lenovo ThinkBook 21J0 into DMI quirk tableJohnny Hsieh1-0/+7
This patch adds Lenovo 21J0 (ThinkBook 16 G5+ ARP) to the DMI quirks table to enable internal microphone array. Cc: [email protected] Signed-off-by: Johnny Hsieh <[email protected]> Link: https://msgid.link/r/TYSPR04MB8429D62DFDB6727866ECF1DEC55A2@TYSPR04MB8429.apcprd04.prod.outlook.com Signed-off-by: Mark Brown <[email protected]>
2024-02-26drm/ttm/tests: depend on UML || COMPILE_TESTChristian König1-2/+3
At least the device test requires that no other driver using TTM is loaded. So make those unit tests depend on UML || COMPILE_TEST to prevent people from trying them on bare metal. Signed-off-by: Christian König <[email protected]> Acked-by: Alex Deucher <[email protected]> Link: https://lore.kernel.org/all/20240219230116.77b8ad68@yea/
2024-02-26Merge drm/drm-fixes into drm-misc-fixesMaxime Ripard1526-8433/+15067
Sima needs a more recent release to apply a patch. Signed-off-by: Maxime Ripard <[email protected]>
2024-02-26drm/tegra: Remove existing framebuffer only if we support displayThierry Reding1-3/+20
Tegra DRM doesn't support display on Tegra234 and later, so make sure not to remove any existing framebuffers in that case. v2: - add comments explaining how this situation can come about - clear DRIVER_MODESET and DRIVER_ATOMIC feature bits Fixes: 6848c291a54f ("drm/aperture: Convert drivers to aperture interfaces") Signed-off-by: Thierry Reding <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-26ipv6: fix potential "struct net" leak in inet6_rtm_getaddr()Eric Dumazet1-3/+4
It seems that if userspace provides a correct IFA_TARGET_NETNSID value but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr() returns -EINVAL with an elevated "struct net" refcount. Fixes: 6ecf4c37eb3e ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR") Signed-off-by: Eric Dumazet <[email protected]> Cc: Christian Brauner <[email protected]> Cc: David Ahern <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-26selftests: net: veth: test syncing GRO and XDP state while device is downJakub Kicinski1-0/+14
Test that we keep GRO flag in sync when XDP is disabled while the device is closed. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-26net: veth: clear GRO when clearing XDP even when downJakub Kicinski1-18/+17
veth sets NETIF_F_GRO automatically when XDP is enabled, because both features use the same NAPI machinery. The logic to clear NETIF_F_GRO sits in veth_disable_xdp() which is called both on ndo_stop and when XDP is turned off. To avoid the flag from being cleared when the device is brought down, the clearing is skipped when IFF_UP is not set. Bringing the device down should indeed not modify its features. Unfortunately, this means that clearing is also skipped when XDP is disabled _while_ the device is down. And there's nothing on the open path to bring the device features back into sync. IOW if user enables XDP, disables it and then brings the device up we'll end up with a stray GRO flag set but no NAPI instances. We don't depend on the GRO flag on the datapath, so the datapath won't crash. We will crash (or hang), however, next time features are sync'ed (either by user via ethtool or peer changing its config). The GRO flag will go away, and veth will try to disable the NAPIs. But the open path never created them since XDP was off, the GRO flag was a stray. If NAPI was initialized before we'll hang in napi_disable(). If it never was we'll crash trying to stop uninitialized hrtimer. Move the GRO flag updates to the XDP enable / disable paths, instead of mixing them with the ndo_open / ndo_close paths. Fixes: d3256efd8e8b ("veth: allow enabling NAPI even without XDP") Reported-by: Thomas Gleixner <[email protected]> Reported-by: [email protected] Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-26drm/i915/hdcp: Remove additional timing for reading mst hdcp messageSuraj Kandpal1-7/+2
Now that we have moved back to direct reads the additional timing is not required hence this can be removed. --v2 -Add Fixes tag [Ankit] Fixes: 3974f9c17bb9 ("drm/i915/hdcp: Adjust timeout for read in DPMST Scenario") Signed-off-by: Suraj Kandpal <[email protected]> Reviewed-by: Ankit Nautiyal <[email protected]> Signed-off-by: Ankit Nautiyal <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 429ccbd1c39baefc6114b482ae98c188f007afcd) Signed-off-by: Joonas Lahtinen <[email protected]>
2024-02-26drm/i915/hdcp: Move to direct reads for HDCPSuraj Kandpal1-22/+9
Even for MST scenarios we need to do direct reads only on the immediate downstream device the rest of the authentication is taken care by that device. Remote reads will only be used to check capability of the monitors in MST topology. --v2 -Add fixes tag [Ankit] -Derive aux where needed rather than through a function [Ankit] Fixes: ae4f902bb344 ("drm/i915/hdcp: Send the correct aux for DPMST HDCP scenario") Signed-off-by: Suraj Kandpal <[email protected]> Reviewed-by: Ankit Nautiyal <[email protected]> Signed-off-by: Ankit Nautiyal <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 287c0de8b29489cdb20957980ca08c33ae4a67b9) Signed-off-by: Joonas Lahtinen <[email protected]>
2024-02-25Linux 6.8-rc6Linus Torvalds1-1/+1
2024-02-25Merge tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefsLinus Torvalds7-22/+25
Pull bcachefs fixes from Kent Overstreet: "Some more mostly boring fixes, but some not User reported ones: - the BTREE_ITER_FILTER_SNAPSHOTS one fixes a really nasty performance bug; user reported an untar initially taking two seconds and then ~2 minutes - kill a __GFP_NOFAIL in the buffered read path; this was a leftover from the trickier fix to kill __GFP_NOFAIL in readahead, where we can't return errors (and have to silently truncate the read ourselves). bcachefs can't use GFP_NOFAIL for folio state unlike iomap based filesystems because our folio state is just barely too big, 2MB hugepages cause us to exceed the 2 page threshhold for GFP_NOFAIL. additionally, the flags argument was just buggy, we weren't supplying GFP_KERNEL previously (!)" * tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs: bcachefs: fix bch2_save_backtrace() bcachefs: Fix check_snapshot() memcpy bcachefs: Fix bch2_journal_flush_device_pins() bcachefs: fix iov_iter count underflow on sub-block dio read bcachefs: Fix BTREE_ITER_FILTER_SNAPSHOTS on inodes btree bcachefs: Kill __GFP_NOFAIL in buffered read path bcachefs: fix backpointer_to_text() when dev does not exist
2024-02-25bcachefs: fix bch2_save_backtrace()Kent Overstreet1-1/+1
Missed a call in the previous fix. Signed-off-by: Kent Overstreet <[email protected]>
2024-02-25Merge tag 'docs-6.8-fixes3' of git://git.lwn.net/linuxLinus Torvalds2-6/+10
Pull two documentation build fixes from Jonathan Corbet: - The XFS online fsck documentation uses incredibly deeply nested subsection and list nesting; that broke the PDF docs build. Tweak a parameter to tell LaTeX to allow the deeper nesting. - Fix a 6.8 PDF-build regression * tag 'docs-6.8-fixes3' of git://git.lwn.net/linux: docs: translations: use attribute to store current language docs: Instruct LaTeX to cope with deeper nesting
2024-02-25Merge tag 'usb-6.8-rc6' of ↵Linus Torvalds12-26/+75
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 6.8-rc6 to resolve some reported problems. These include: - regression fixes with typec tpcm code as reported by many - cdnsp and cdns3 driver fixes - usb role setting code bugfixes - build fix for uhci driver - ncm gadget driver bugfix - MAINTAINERS entry update All of these have been in linux-next all week with no reported issues and there is at least one fix in here that is in Thorsten's regression list that is being tracked" * tag 'usb-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tpcm: Fix issues with power being removed during reset MAINTAINERS: Drop myself as maintainer of TYPEC port controller drivers usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role" usb: gadget: omap_udc: fix USB gadget regression on Palm TE usb: dwc3: gadget: Don't disconnect if not started usb: cdns3: fix memory double free when handle zero packet usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable() usb: roles: don't get/set_role() when usb_role_switch is unregistered usb: roles: fix NULL pointer issue when put module's reference usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers usb: cdnsp: blocked some cdns3 specific code usb: uhci-grlib: Explicitly include linux/platform_device.h
2024-02-25Merge tag 'tty-6.8-rc6' of ↵Linus Torvalds3-34/+38
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are three small serial/tty driver fixes for 6.8-rc6 that resolve the following reported errors: - riscv hvc console driver fix that was reported by many - amba-pl011 serial driver fix for RS485 mode - stm32 serial driver fix for RS485 mode All of these have been in linux-next all week with no reported problems" * tag 'tty-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: amba-pl011: Fix DMA transmission in RS485 mode serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled tty: hvc: Don't enable the RISC-V SBI console by default
2024-02-25Merge tag 'x86_urgent_for_v6.8_rc6' of ↵Linus Torvalds13-46/+112
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Make sure clearing CPU buffers using VERW happens at the latest possible point in the return-to-userspace path, otherwise memory accesses after the VERW execution could cause data to land in CPU buffers again * tag 'x86_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: KVM/VMX: Move VERW closer to VMentry for MDS mitigation KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static key x86/entry_32: Add VERW just before userspace transition x86/entry_64: Add VERW just before userspace transition x86/bugs: Add asm helpers for executing VERW
2024-02-25Merge tag 'irq_urgent_for_v6.8_rc6' of ↵Linus Torvalds4-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Make sure GICv4 always gets initialized to prevent a kexec-ed kernel from silently failing to set it up - Do not call bus_get_dev_root() for the mbigen irqchip as it always returns NULL - use NULL directly - Fix hardware interrupt number truncation when assigning MSI interrupts - Correct sending end-of-interrupt messages to disabled interrupts lines on RISC-V PLIC * tag 'irq_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Do not assume vPE tables are preallocated irqchip/mbigen: Don't use bus_get_dev_root() to find the parent PCI/MSI: Prevent MSI hardware interrupt number truncation irqchip/sifive-plic: Enable interrupt if needed before EOI
2024-02-25Merge tag 'erofs-for-6.8-rc6-fixes' of ↵Linus Torvalds1-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fix from Gao Xiang: - Fix page refcount leak when looking up specific inodes introduced by metabuf reworking * tag 'erofs-for-6.8-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: fix refcount on the metabuf used for inode lookup
2024-02-25Merge tag 'pull-fixes.pathwalk-rcu-2' of ↵Linus Torvalds22-63/+88
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull RCU pathwalk fixes from Al Viro: "We still have some races in filesystem methods when exposed to RCU pathwalk. This series is a result of code audit (the second round of it) and it should deal with most of that stuff. Still pending: ntfs3 ->d_hash()/->d_compare() and ceph_d_revalidate(). Up to maintainers (a note for NTFS folks - when documentation says that a method may not block, it *does* imply that blocking allocations are to be avoided. Really)" [ More explanations for people who aren't familiar with the vagaries of RCU path walking: most of it is hidden from filesystems, but if a filesystem actively participates in the low-level path walking it needs to make sure the fields involved in that walk are RCU-safe. That "actively participate in low-level path walking" includes things like having its own ->d_hash()/->d_compare() routines, or by having its own directory permission function that doesn't just use the common helpers. Having a ->d_revalidate() function will also have this issue. Note that instead of making everything RCU safe you can also choose to abort the RCU pathwalk if your operation cannot be done safely under RCU, but that obviously comes with a performance penalty. One common pattern is to allow the simple cases under RCU, and abort only if you need to do something more complicated. So not everything needs to be RCU-safe, and things like the inode etc that the VFS itself maintains obviously already are. But these fixes tend to be about properly RCU-delaying things like ->s_fs_info that are maintained by the filesystem and that got potentially released too early. - Linus ] * tag 'pull-fixes.pathwalk-rcu-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ext4_get_link(): fix breakage in RCU mode cifs_get_link(): bail out in unsafe case fuse: fix UAF in rcu pathwalks procfs: make freeing proc_fs_info rcu-delayed procfs: move dropping pde and pid from ->evict_inode() to ->free_inode() nfs: fix UAF on pathwalk running into umount nfs: make nfs_set_verifier() safe for use in RCU pathwalk afs: fix __afs_break_callback() / afs_drop_open_mmap() race hfsplus: switch to rcu-delayed unloading of nls and freeing ->s_fs_info exfat: move freeing sbi, upcase table and dropping nls into rcu-delayed helper affs: free affs_sb_info with kfree_rcu() rcu pathwalk: prevent bogus hard errors from may_lookup() fs/super.c: don't drop ->s_user_ns until we free struct super_block itself
2024-02-25Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds3-4/+9
Pull vfs fixes from Al Viro: "A couple of fixes - revert of regression from this cycle and a fix for erofs failure exit breakage (had been there since way back)" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: erofs: fix handling kern_mount() failure Revert "get rid of DCACHE_GENOCIDE"
2024-02-25efivarfs: Drop 'duplicates' bool parameter on efivar_init()Ard Biesheuvel3-6/+4
The 'duplicates' bool argument is always true when efivar_init() is called from its only caller so let's just drop it instead. Signed-off-by: Ard Biesheuvel <[email protected]>
2024-02-25efivarfs: Drop redundant cleanup on fill_super() failureArd Biesheuvel1-6/+1
Al points out that kill_sb() will be called if efivarfs_fill_super() fails and so there is no point in cleaning up the efivar entry list. Reported-by: Alexander Viro <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2024-02-25efivarfs: Request at most 512 bytes for variable namesTim Schumacher1-6/+11
Work around a quirk in a few old (2011-ish) UEFI implementations, where a call to `GetNextVariableName` with a buffer size larger than 512 bytes will always return EFI_INVALID_PARAMETER. There is some lore around EFI variable names being up to 1024 bytes in size, but this has no basis in the UEFI specification, and the upper bounds are typically platform specific, and apply to the entire variable (name plus payload). Given that Linux does not permit creating files with names longer than NAME_MAX (255) bytes, 512 bytes (== 256 UTF-16 characters) is a reasonable limit. Cc: <[email protected]> # 6.1+ Signed-off-by: Tim Schumacher <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2024-02-25ALSA: hda/realtek: Add special fixup for Lenovo 14IRP8Willian Wang1-1/+26
Lenovo Slim/Yoga Pro 9 14IRP8 requires a special fixup because there is a collision of its PCI SSID (17aa:3802) with Lenovo Yoga DuetITL 2021 codec SSID. Fixes: 3babae915f4c ("ALSA: hda/tas2781: Add tas2781 HDA driver") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208555 Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Signed-off-by: Willian Wang <[email protected]> Reviewed-by: Gergo Koteles <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.