| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a crash in intel_pstate during resume from suspend-to-RAM
that may occur after recent changes and two resource leaks in error
paths in the operating performance points (OPP) framework, add a new
C-states table to intel_idle and update the cpuidle MAINTAINERS entry
to cover the governors too.
Specifics:
- Fix recently introduced crash in the intel_pstate driver that
occurs if scale-invariance is disabled during resume from
suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR
values made by the platform firmware (Rafael Wysocki).
- Fix a memory leak and add a missing clk_put() in error paths in the
OPP framework (Quanyang Wang, Viresh Kumar).
- Add new C-states table for SnowRidge processors to the intel_idle
driver (Artem Bityutskiy).
- Update the MAINTAINERS entry for cpuidle to make it clear that the
governors are covered by it too (Lukas Bulwahn)"
* tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: add SnowRidge C-state table
cpufreq: intel_pstate: Fix fast-switch fallback path
opp: Call the missing clk_put() on error
opp: fix memory leak in _allocate_opp_table
MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
|
|
* pm-cpufreq:
cpufreq: intel_pstate: Fix fast-switch fallback path
* pm-cpuidle:
intel_idle: add SnowRidge C-state table
MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).
The big core two fixes are for power management ("block: Do not accept
any requests while suspended" and "block: Fix a race in the runtime
power management code") which finally sorts out the resume problems
we've occasionally been having.
To make the resume fix, there are seven necessary precursors which
effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
in block is automatically a power management exempt one.
All of the non-PM preempt cases are removed except for the one in the
SCSI Parallel Interface (spi) domain validation which is a genuine
case where we have to run requests at high priority to validate the
bus so this becomes an autopm get/put protected request"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
scsi: cxgb4i: Fix TLS dependency
scsi: ufs: Un-inline ufshcd_vops_device_reset function
scsi: ufs: Re-enable WriteBooster after device reset
scsi: ufs-mediatek: Use correct path to fix compile error
scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
scsi: block: Do not accept any requests while suspended
scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: block: Introduce BLK_MQ_REQ_PM
scsi: block: Fix a race in the runtime power management code
scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ufs-pci: Fix restore from S4 for Intel controllers
scsi: ufs-mediatek: Keep VCC always-on for specific devices
scsi: ufs: Allow regulators being always-on
scsi: ufs: Clear UAC for RPMB after ufshcd resets
...
|
|
Pull block fixes from Jens Axboe:
"Two minor block fixes from this last week that should go into 5.11:
- Add missing NOWAIT debugfs definition (Andres)
- Fix kerneldoc warning introduced this merge window (Randy)"
* tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
block: add debugfs stanza for QUEUE_FLAG_NOWAIT
fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
|
|
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into 5.11, all marked for stable as well:
- Fix issue around identity COW'ing and users that share a ring
across processes
- Fix a hang associated with unregistering fixed files (Pavel)
- Move the 'process is exiting' cancelation a bit earlier, so
task_works aren't affected by it (Pavel)"
* tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
kernel/io_uring: cancel io_uring before task works
io_uring: fix io_sqe_files_unregister() hangs
io_uring: add a helper for setting a ref node
io_uring: don't assume mm is constant across submits
|
|
Commit 436e980e2ed5 ("kbuild: don't hardcode depmod path") stopped
hard-coding the path of depmod, but in the process caused trouble for
distributions that had that /sbin location, but didn't have it in the
PATH (generally because /sbin is limited to the super-user path).
Work around it for now by just adding /sbin to the end of PATH in the
depmod.sh script.
Reported-and-tested-by: Sedat Dilek <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The silent_stream_disable() function introduced by the commit
b1a5039759cb ("ALSA: hda/hdmi: fix silent stream for first playback to
DP") takes the per_pin->lock mutex, but it unlocks the wrong one,
spec->pcm_lock, which causes a deadlock. This patch corrects it.
Fixes: b1a5039759cb ("ALSA: hda/hdmi: fix silent stream for first playback to DP")
Reported-by: Jan Alexander Steffens (heftig) <[email protected]>
Cc: <[email protected]>
Acked-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
HP EliteBook 850 G7 uses the same GPIO pins as ALC285_FIXUP_HP_GPIO_LED
to enable mute and micmute LED. So apply the quirk to enable the LEDs.
Signed-off-by: Kai-Heng Feng <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Add two "Intel Reference boad" SSID in the alc256.
Enable "power saving mode" and Enable "headset jack mode".
Signed-off-by: PeiSen Hou <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
HP Pavilion 13-bb0000 (SSID 103c:87c8) needs the same
quirk as other models with ALC287.
Signed-off-by: Manuel Jiménez <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/X+s/gKNydVrI6nLj@HP-Pavilion-13
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The current kernel does not support the cx11970 codec chip.
Add a codec configuration item to kernel.
[ Minor coding style fix by tiwai ]
Signed-off-by: bo liu <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
For cancelling io_uring requests it needs either to be able to run
currently enqueued task_works or having it shut down by that moment.
Otherwise io_uring_cancel_files() may be waiting for requests that won't
ever complete.
Go with the first way and do cancellations before setting PF_EXITING and
so before putting the task_work infrastructure into a transition state
where task_work_run() would better not be called.
Cc: [email protected] # 5.5+
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes,
however requests keeping them may never complete, e.g. because of some
userspace dependency. Make sure it's interruptible otherwise it would
hang forever.
Cc: [email protected] # 5.6+
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Setting a new reference node to a file data is not trivial, don't repeat
it, add and use a helper.
Cc: [email protected] # 5.6+
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull ceph fixes from Ilya Dryomov:
"A fix for an edge case in MClientRequest encoding and a couple of
trivial fixups for the new msgr2 support"
* tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client:
libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE
libceph: align session_key and con_secret to 16 bytes
libceph: fix auth_signature buffer allocation in secure mode
ceph: reencode gid_list when reconnecting
|
|
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville
platforms.
The following has been changed.
1. C1E latency changed from 10us to 15us. It was measured using the
open source "wult" tool (the "nic" method, 15us is the 99.99th
percentile).
2. C1E power break even changed from 20us to 25us, which may result
in less C1E residency in some workloads.
3. C6 latency changed from 50us to 130us. Measured the same way as C1E.
The C6 C-state is supported only by some SnowRidge revisions, so add a C-state
table commentary about this.
On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of
the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even
though C6 is present in the table, the driver will only use it if the CPU does
support it.
Signed-off-by: Artem Bityutskiy <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
When sugov_update_single_perf() falls back to the "frequency"
path due to the missing scale-invariance, it will call
cpufreq_driver_fast_switch() via sugov_fast_switch()
and the driver's ->fast_switch() callback will be invoked,
so it must not be NULL.
However, after commit a365ab6b9dfb ("cpufreq: intel_pstate: Implement
the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to
NULL when it is going to use intel_cpufreq_adjust_perf(), which is a
mistake, because on x86 the scale-invariance may be turned off
dynamically, so modify it to retain the original ->adjust_perf()
callback pointer.
Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Reported-by: Kenneth R. Crudup <[email protected]>
Tested-by: Kenneth R. Crudup <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework fixes for 5.11-rc2
from Viresh Kumar:
"This contains two patches to fix freeing of resources in error paths."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Call the missing clk_put() on error
opp: fix memory leak in _allocate_opp_table
|
|
...and add comments at the top and bottom.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
If spi->controller->max_speed_hz is zero, a non-zero spi->max_speed_hz
will be overwritten by zero. Make sure spi->controller->max_speed_hz
is not zero when clamping spi->max_speed_hz.
Put the spi->controller->max_speed_hz non-zero check higher in the if,
so that we avoid a superfluous init to zero when both spi->max_speed_hz
and spi->controller->max_speed_hz are zero.
Fixes: 9326e4f1e5dd ("spi: Limit the spi device max speed to controller's max speed")
Reported-by: Geert Uytterhoeven <[email protected]>
Suggested-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Tudor Ambarus <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This was missed in 021a24460dc2. Leads to the numeric value of
QUEUE_FLAG_NOWAIT (i.e. 29) showing up in
/sys/kernel/debug/block/*/state.
Fixes: 021a24460dc28e7412aecfae89f60e1847e685c0
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Mike Snitzer <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Andres Freund <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Fix new kernel-doc warnings in fs/block_dev.c:
../fs/block_dev.c:1066: warning: Excess function parameter 'whole' description in 'bd_abort_claiming'
../fs/block_dev.c:1837: warning: Function parameter or member 'dev' not described in 'lookup_bdev'
Fixes: 4e7b5671c6a8 ("block: remove i_bdev")
Fixes: 37c3fc9abb25 ("block: simplify the block device claiming interface")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: [email protected]
Cc: Alexander Viro <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Merge misc fixes from Andrew Morton:
"16 patches
Subsystems affected by this patch series: mm (selftests, hugetlb,
pagecache, mremap, kasan, and slub), kbuild, checkpatch, misc, and
lib"
* emailed patches from Andrew Morton <[email protected]>:
mm: slub: call account_slab_page() after slab page initialization
zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c
lib/zlib: fix inflating zlib streams on s390
lib/genalloc: fix the overflow when size is too big
kdev_t: always inline major/minor helper functions
sizes.h: add SZ_8G/SZ_16G/SZ_32G macros
local64.h: make <asm/local64.h> mandatory
kasan: fix null pointer dereference in kasan_record_aux_stack
mm: generalise COW SMC TLB flushing race comment
mm/mremap.c: fix extent calculation
mm: memmap defer init doesn't work as expected
mm: add prototype for __add_to_page_cache_locked()
checkpatch: prefer strscpy to strlcpy
Revert "kbuild: avoid static_assert for genksyms"
mm/hugetlb: fix deadlock in hugetlb_cow error path
selftests/vm: fix building protection keys test
|
|
It's convenient to have page->objects initialized before calling into
account_slab_page(). In particular, this information can be used to
pre-alloc the obj_cgroup vector.
Let's call account_slab_page() a bit later, after the initialization of
page->objects.
This commit doesn't bring any functional change, but is required for
further optimizations.
[[email protected]: undo changes needed by forthcoming mm-memcg-slab-pre-allocate-obj_cgroups-for-slab-caches-with-slab_account.patch]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Roman Gushchin <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Reviewed-by: Shakeel Butt <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Christoph Lameter <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In commit 11fb479ff5d9 ("zlib: export S390 symbols for zlib modules"), I
added EXPORT_SYMBOL()s to dfltcc_inflate.c but then Mikhail said that
these should probably be in dfltcc_syms.c with the other
EXPORT_SYMBOL()s.
However, that is contrary to the current kernel style, which places
EXPORT_SYMBOL() immediately after the function that it applies to, so
move all EXPORT_SYMBOL()s to their respective function locations and
drop the dfltcc_syms.c file. Also move MODULE_LICENSE() from the
deleted file to dfltcc.c.
[[email protected]: remove dfltcc_syms.o from Makefile]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 11fb479ff5d9 ("zlib: export S390 symbols for zlib modules")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Acked-by: Ilya Leoshkevich <[email protected]>
Acked-by: Christian Borntraeger <[email protected]>
Cc: Zaslonko Mikhail <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Decompressing zlib streams on s390 fails with "incorrect data check"
error.
Userspace zlib checks inflate_state.flags in order to byteswap checksums
only for zlib streams, and s390 hardware inflate code, which was ported
from there, tries to match this behavior. At the same time, kernel zlib
does not use inflate_state.flags, so it contains essentially random
values. For many use cases either zlib stream is zeroed out or checksum
is not used, so this problem is masked, but at least SquashFS is still
affected.
Fix by always passing a checksum to and from the hardware as is, which
matches zlib_inflate()'s expectations.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 126196100063 ("lib/zlib: add s390 hardware support for kernel zlib_inflate")
Signed-off-by: Ilya Leoshkevich <[email protected]>
Tested-by: Christian Borntraeger <[email protected]>
Acked-by: Mikhail Zaslonko <[email protected]>
Acked-by: Christian Borntraeger <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Mikhail Zaslonko <[email protected]>
Cc: <[email protected]> [5.6+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Some graphic card has very big memory on chip, such as 32G bytes.
In the following case, it will cause overflow:
pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE);
ret = gen_pool_add(pool, 0x1000000, SZ_32G, NUMA_NO_NODE);
va = gen_pool_alloc(pool, SZ_4G);
The overflow occurs in gen_pool_alloc_algo_owner():
....
size = nbits << order;
....
The @nbits is "int" type, so it will overflow.
Then the gen_pool_avail() will return the wrong value.
This patch converts some "int" to "unsigned long", and
changes the compare code in while.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Huang Shijie <[email protected]>
Reported-by: Shi Jiasheng <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Silly GCC doesn't always inline these trivial functions.
Fixes the following warning:
arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled
Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.com
Signed-off-by: Josh Poimboeuf <[email protected]>
Reported-by: Randy Dunlap <[email protected]>
Acked-by: Randy Dunlap <[email protected]> [build-tested]
Cc: Peter Zijlstra <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add these macros, since we can use them in drivers.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Huang Shijie <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and
remove all arch/*/include/asm/local64.h arch-specific files since they
only #include <asm-generic/local64.h>.
This fixes build errors on arch/c6x/ and arch/nios2/ for
block/blk-iocost.c.
Build-tested on 21 of 25 arch-es. (tools problems on the others)
Yes, we could even rename <asm-generic/local64.h> to
<linux/local64.h> and change all #includes to use
<linux/local64.h> instead.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Suggested-by: Christoph Hellwig <[email protected]>
Reviewed-by: Masahiro Yamada <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Aurelien Jacquiot <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Syzbot reported the following [1]:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 2d993067 P4D 2d993067 PUD 19a3c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 3852 Comm: kworker/1:2 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events free_ipc
RIP: 0010:kasan_record_aux_stack+0x77/0xb0
Add null checking slab object from kasan_get_alloc_meta() in order to
avoid null pointer dereference.
[1] https://syzkaller.appspot.com/x/log.txt?x=10a82a50d00000
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Walter Wu <[email protected]>
Suggested-by: Dmitry Vyukov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
I'm not sure if I'm completely missing something here, but AFAIKS the
reference to the mysterious "COW SMC race" confuses the issue. The
original changelog and mailing list thread didn't help me either.
This SMC race is where the problem was detected, but isn't the general
problem bigger and more obvious: that the new PTE could be picked up at
any time by any TLB while entries for the old PTE exist in other TLBs
before the TLB flush takes effect?
The case where the iTLB and dTLB of a CPU are pointing at different pages
is an interesting one but follows from the general problem.
The other (minor) thing with the comment I think it makes it a bit clearer
to say what the old code was doing (i.e., it avoids the race as opposed to
what?).
References: 4ce072f1faf29 ("mm: fix a race condition under SMC + COW")
Link: https://lkml.kernel.org/r/[email protected]
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Cc: Suresh Siddha <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suresh Siddha <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When `next < old_addr`, `next - old_addr` arithmetic underflows causing
`extent` to be incorrect.
Make `extent` the smaller of `next - old_addr` or `old_end - old_addr`.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c49dd34018026 ("mm: speedup mremap on 1GB or larger regions")
Signed-off-by: Kalesh Singh <[email protected]>
Reported-by: Guenter Roeck <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Lokesh Gidra <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Kalesh Singh <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
VMware observed a performance regression during memmap init on their
platform, and bisected to commit 73a6e474cb376 ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.
Before the commit:
[0.033176] Normal zone: 1445888 pages used for memmap
[0.033176] Normal zone: 89391104 pages, LIFO batch:63
[0.035851] ACPI: PM-Timer IO Port: 0x448
With commit
[0.026874] Normal zone: 1445888 pages used for memmap
[0.026875] Normal zone: 89391104 pages, LIFO batch:63
[2.028450] ACPI: PM-Timer IO Port: 0x448
The root cause is the current memmap defer init doesn't work as expected.
Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node. However, since commit 73a6e474cb376,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.
E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2. The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff]. In fact, we only expect to see that there's
only one memory section's memmap initialized. That's why more time is
costed at the time.
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[ 0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[ 0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[ 0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]
Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Baoquan He <[email protected]>
Reported-by: Rahul Gopakumar <[email protected]>
Reviewed-by: Mike Rapoport <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Otherwise it causes a gcc warning:
mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes]
A previous attempt to make this function static led to compilation
errors when CONFIG_DEBUG_INFO_BTF is enabled because
__add_to_page_cache_locked() is referred to by BPF code.
Adding a prototype will silence the warning.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Souptick Joarder <[email protected]>
Cc: Alex Shi <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Prefer strscpy over the deprecated strlcpy function.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Joe Perches <[email protected]>
Requested-by: Andrew Morton <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This reverts commit 14dc3983b5dff513a90bd5a8cc90acaf7867c3d0.
Macro Elver had sent a fix proper fix earlier, and also pointed out
corner cases:
"I guess what you propose is simpler, but might still have corner cases
where we still get warnings. In particular, if some file (for whatever
reason) does not include build_bug.h and uses a raw _Static_assert(),
then we still get warnings. E.g. I see 1 user of raw _Static_assert()
(drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h )."
I believe the raw use of _Static_assert() should be allowed, so this
should be fixed in genksyms.
Even after commit 14dc3983b5df ("kbuild: avoid static_assert for
genksyms"), I confirmed the following test code emits the warning.
---------------->8----------------
#include <linux/export.h>
_Static_assert((1 ?: 0), "");
void foo(void) { }
EXPORT_SYMBOL(foo);
---------------->8----------------
WARNING: modpost: EXPORT symbol "foo" [vmlinux] version generation failed, symbol will not be versioned.
Now that commit 869b91992bce ("genksyms: Ignore module scoped
_Static_assert()") fixed this issue properly, the workaround should
be reverted.
Link: https://lkml.org/lkml/2020/12/10/845
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Masahiro Yamada <[email protected]>
Cc: Marco Elver <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
syzbot reported the deadlock here [1]. The issue is in hugetlb cow
error handling when there are not enough huge pages for the faulting
task which took the original reservation. It is possible that other
(child) tasks could have consumed pages associated with the reservation.
In this case, we want the task which took the original reservation to
succeed. So, we unmap any associated pages in children so that they can
be used by the faulting task that owns the reservation.
The unmapping code needs to hold i_mmap_rwsem in write mode. However,
due to commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd
sharing synchronization") we are already holding i_mmap_rwsem in read
mode when hugetlb_cow is called.
Technically, i_mmap_rwsem does not need to be held in read mode for COW
mappings as they can not share pmd's. Modifying the fault code to not
take i_mmap_rwsem in read mode for COW (and other non-sharable) mappings
is too involved for a stable fix.
Instead, we simply drop the hugetlb_fault_mutex and i_mmap_rwsem before
unmapping. This is OK as it is technically not needed. They are
reacquired after unmapping as expected by calling code. Since this is
done in an uncommon error path, the overhead of dropping and reacquiring
mutexes is acceptable.
While making changes, remove redundant BUG_ON after unmap_ref_private.
[1] https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization")
Signed-off-by: Mike Kravetz <[email protected]>
Reported-by: [email protected]
Cc: Naoya Horiguchi <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: "Aneesh Kumar K . V" <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit d8cbe8bfa7d ("tools/testing/selftests/vm: fix build error") tried
to include a ARCH check for powerpc, however ARCH is not defined in the
Makefile before including lib.mk. This makes test building to skip on
both x86 and powerpc.
Fix the arch check by replacing it using machine type as it is already
defined and used in the test.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: d8cbe8bfa7d ("tools/testing/selftests/vm: fix build error")
Signed-off-by: Harish <[email protected]>
Reviewed-by: Sandipan Das <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If we COW the identity, we assume that ->mm never changes. But this
isn't true of multiple processes end up sharing the ring. Hence treat
id->mm like like any other process compontent when it comes to the
identity mapping. This is pretty trivial, just moving the existing grab
into io_grab_identity(), and including a check for the match.
Cc: [email protected] # 5.10
Fixes: 1e6fa5216a0e ("io_uring: COW io_identity on mismatch")
Reported-by: Christian Brauner <[email protected]>:
Tested-by: Christian Brauner <[email protected]>:
Signed-off-by: Jens Axboe <[email protected]>
|
|
When CONFIG_BPF_LSM is not configured, running bpf selftesting will show
BPF_F_BPRM_SECUREEXEC undefined error for bprm_opts.c.
The problem is that bprm_opts.c includes vmliunx.h. The vmlinux.h is
generated by "bpftool btf dump file ./vmlinux format c". On the other
hand, BPF_F_BPRM_SECUREEXEC is defined in include/uapi/linux/bpf.h
and used only in bpf_lsm.c. When CONFIG_BPF_LSM is not set, bpf_lsm
will not be compiled, so vmlinux.h will not include definition of
BPF_F_BPRM_SECUREEXEC.
Ideally, we want to compile bpf selftest regardless of the configuration
setting, so change the include file from vmlinux.h to bpf.h.
Signed-off-by: Jiang Wang <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch fixes the return value for altera_spi_txrx. It should return
1 for interrupt transfer mode, and return 0 for polling transfer mode.
The altera_spi_txrx() implements the spi_controller.transfer_one
callback. According to the spi-summary.rst, the transfer_one should
return 0 when transfer is finished, return 1 when transfer is still in
progress.
Signed-off-by: Xu Yilun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
After initializing the regmap through
syscon_regmap_lookup_by_compatible, then regmap_attach_dev to the
device, because the debugfs_name has been allocated, there is no
need to redistribute it again
unreferenced object 0xd8399b80 (size 64):
comm "swapper/0", pid 1, jiffies 4294937641 (age 278.590s)
hex dump (first 32 bytes):
64 75 6d 6d 79 2d 69 6f 6d 75 78 63 2d 67 70 72
dummy-iomuxc-gpr
40 32 30 65 34 30 30 30 00 7f 52 5b d8 7e 42 69
@20e4000..R[.~Bi
backtrace:
[<ca384d6f>] kasprintf+0x2c/0x54
[<6ad3bbc2>] regmap_debugfs_init+0xdc/0x2fc
[<bc4181da>] __regmap_init+0xc38/0xd88
[<1f7e0609>] of_syscon_register+0x168/0x294
[<735e8766>] device_node_get_regmap+0x6c/0x98
[<d96c8982>] imx6ul_init_machine+0x20/0x88
[<0456565b>] customize_machine+0x1c/0x30
[<d07393d8>] do_one_initcall+0x80/0x3ac
[<7e584867>] kernel_init_freeable+0x170/0x1f0
[<80074741>] kernel_init+0x8/0x120
[<285d6f28>] ret_from_fork+0x14/0x20
[<00000000>] 0x0
Fixes: 9b947a13e7f6 ("regmap: use debugfs even when no device")
Signed-off-by: Xiaolei Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
BOSS AD-10 requires the very same quirk like other BOSS devices to
enable the special implicit feedback mode.
Reported-and-tested-by: Martin Passing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2020-12-28
The following pull-request contains BPF updates for your *net* tree.
There is a small merge conflict between bpf tree commit 69ca310f3416
("bpf: Save correct stopping point in file seq iteration") and net tree
commit 66ed594409a1 ("bpf/task_iter: In task_file_seq_get_next use
task_lookup_next_fd_rcu"). The get_files_struct() does not exist anymore
in net, so take the hunk in HEAD and add the `info->tid = curr_tid` to
the error path:
[...]
curr_task = task_seq_get_next(ns, &curr_tid, true);
if (!curr_task) {
info->task = NULL;
info->tid = curr_tid;
return NULL;
}
/* set info->task and info->tid */
[...]
We've added 10 non-merge commits during the last 9 day(s) which contain
a total of 11 files changed, 75 insertions(+), 20 deletions(-).
The main changes are:
1) Various AF_XDP fixes such as fill/completion ring leak on failed bind and
fixing a race in skb mode's backpressure mechanism, from Magnus Karlsson.
2) Fix latency spikes on lockdep enabled kernels by adding a rescheduling
point to BPF hashtab initialization, from Eric Dumazet.
3) Fix a splat in task iterator by saving the correct stopping point in the
seq file iteration, from Jonathan Lemon.
4) Fix BPF maps selftest by adding retries in case hashtab returns EBUSY
errors on update/deletes, from Andrii Nakryiko.
5) Fix BPF selftest error reporting to something more user friendly if the
vmlinux BTF cannot be found, from Kamal Mostafa.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
ppp_cp_event is called directly or indirectly by ppp_rx with "ppp->lock"
held. It may call mod_timer to add a new timer. However, at the same time
ppp_timer may be already running and waiting for "ppp->lock". In this
case, there's no need for ppp_timer to continue running and it can just
exit.
If we let ppp_timer continue running, it may call add_timer. This causes
kernel panic because add_timer can't be called with a timer pending.
This patch fixes this problem.
Fixes: e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.")
Cc: Krzysztof Halasa <[email protected]>
Signed-off-by: Xie He <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This was tested on a RaptorCS Talos II with IBM POWER9 DD2.2 CPUs and an
ASUS XG-C100F PCI-e card without any issue. Speeds of ~8Gbps could be
attained with not-very-scientific (wget HTTP) both-ways measurements on
a local network. No warning or error reported in kernel logs. The
drivers seems to be portable enough for it not to be gated like such.
Signed-off-by: Léo Le Bouter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Both version 0 and version 1 use ETH_P_ERSPAN, but version 0 does not
have an erspan header. So the check in gre_parse_header() is wrong,
we have to distinguish version 1 from version 0.
We can just check the gre header length like is_erspan_type1().
Fixes: cb73ee40b1b3 ("net: ip_gre: use erspan key field for tunnel lookup")
Reported-by: [email protected]
Cc: William Tu <[email protected]>
Cc: Lorenzo Bianconi <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The function skb_copy() could return NULL, the return value
need to be checked.
Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support")
Signed-off-by: Yunjian Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|