| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch series drops the support for 32bit HP-UX binaries.
The HP-UX compat layer has always been incomplete and it's unlikely that
someone will ever implement it.
Furthermore those two commits which enhance the compatibility of Linux on parisc
to other architectures:
f5a408d: parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc
1f25df2: parisc: Reduce SIGRTMIN from 37 to 32 to behave like other Linux architectures
basically make it impossible to implement the HP-UX support correctly.
Signed-off-by: Helge Deller <[email protected]>
|
|
Add checks if the userspace trampoline code was correctly generated by the
signal trampoline generation code. In addition only flush caches as needed and
fix the old flushing code which didn't flushed all generated instructions.
Signed-off-by: Helge Deller <[email protected]>
|
|
Signed-off-by: Helge Deller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris
Pull CRIS changes from Jesper Nilsson.
* tag 'cris-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris:
CRIS: Whitespace cleanup
CRIS: macro whitespace fixes in uaccess.h
CRIS: uaccess: fix sparse errors
CRISv32: Remove unnecessary KERN_INFO from sync_serial
CRIS: Fix missing NR_CPUS in menuconfig
CRISv32: Avoid warning of unused variable
CRIS: Avoid warning in cris mm/fault.c
CRIS: Export csum_partial_copy_nocheck
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver patches from Greg KH:
"Here's the big tty/serial driver update for 3.20-rc1. Nothing huge
here, just lots of driver updates and some core tty layer fixes as
well. All have been in linux-next with no reported issues"
* tag 'tty-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
serial: 8250: Fix UART_BUG_TXEN workaround
serial: driver for ETRAX FS UART
tty: remove unused variable sprop
serial: of-serial: fetch line number from DT
serial: samsung: earlycon support depends on CONFIG_SERIAL_SAMSUNG_CONSOLE
tty/serial: serial8250_set_divisor() can be static
tty/serial: Add Spreadtrum sc9836-uart driver support
Documentation: DT: Add bindings for Spreadtrum SoC Platform
serial: samsung: remove redundant interrupt enabling
tty: Remove external interface for tty_set_termios()
serial: omap: Fix RTS handling
serial: 8250_omap: Use UPSTAT_AUTORTS for RTS handling
serial: core: Rework hw-assisted flow control support
tty/serial: 8250_early: Add support for PXA UARTs
tty/serial: of_serial: add support for PXA/MMP uarts
tty/serial: of_serial: add DT alias ID handling
serial: 8250: Prevent concurrent updates to shadow registers
serial: 8250: Use canary to restart console after suspend
serial: 8250: Refactor XR17V35X divisor calculation
serial: 8250: Refactor divisor programming
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging drivers patches from Greg KH:
"Here's the big staging driver tree update for 3.20-rc1.
Lots of little things in here, adding up to lots of overall cleanups.
The IIO driver updates are also in here as they cross the staging tree
boundry a lot. I2O has moved into staging as well, as a plan to drop
it from the tree eventually as that's a dead subsystem.
All of this has been in linux-next with no reported issues for a
while"
* tag 'staging-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (740 commits)
staging: lustre: lustre: libcfs: define symbols as static
staging: rtl8712: Do coding style cleanup
staging: lustre: make obd_updatemax_lock static
staging: rtl8188eu: core: switch with redundant cases
staging: rtl8188eu: odm: conditional setting with no effect
staging: rtl8188eu: odm: condition with no effect
staging: ft1000: fix braces warning
staging: sm7xxfb: fix remaining CamelCase
staging: sm7xxfb: fix CamelCase
staging: rtl8723au: multiple condition with no effect - if identical to else
staging: sm7xxfb: make smtc_scr_info static
staging/lustre/mdc: Initialize req in mdc_enqueue for !it case
staging/lustre/clio: Do not allow group locks with gid 0
staging/lustre/llite: don't add to page cache upon failure
staging/lustre/llite: Add exception entry check after radix_tree
staging/lustre/libcfs: protect kkuc_groups from write access
staging/lustre/fld: refer to MDT0 for fld lookup in some cases
staging/lustre/llite: Solve a race to access lli_has_smd in read case
staging/lustre/ptlrpc: hold rq_lock when modify rq_flags
staging/lustre/lnet: portal spreading rotor should be unsigned
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg KH:
"Really tiny set of patches for this kernel. Nothing major, all
described in the shortlog and have been in linux-next for a while"
* tag 'driver-core-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: fix warning when creating a sysfs group without attributes
firmware_loader: handle timeout via wait_for_completion_interruptible_timeout()
firmware_loader: abort request if wait_for_completion is interrupted
firmware: Correct function name in comment
device: Change dev_<level> logging functions to return void
device: Fix dev_dbg_once macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc patches from Greg KH:
"Here's the big char/misc driver update for 3.20-rc1.
Lots of little things in here, all described in the changelog.
Nothing major or unusual, except maybe the binder selinux stuff, which
was all acked by the proper selinux people and they thought it best to
come through this tree.
All of this has been in linux-next with no reported issues for a while"
* tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
coresight: fix function etm_writel_cp14() parameter order
coresight-etm: remove check for unknown Kconfig macro
coresight: fixing CPU hwid lookup in device tree
coresight: remove the unnecessary function coresight_is_bit_set()
coresight: fix the debug AMBA bus name
coresight: remove the extra spaces
coresight: fix the link between orphan connection and newly added device
coresight: remove the unnecessary replicator property
coresight: fix the replicator subtype value
pdfdocs: Fix 'make pdfdocs' failure for 'uio-howto.tmpl'
mcb: Fix error path of mcb_pci_probe
virtio/console: verify device has config space
ti-st: clean up data types (fix harmless memory corruption)
mei: me: release hw from reset only during the reset flow
mei: mask interrupt set bit on clean reset bit
extcon: max77693: Constify struct regmap_config
extcon: adc-jack: Release IIO channel on driver remove
extcon: Remove duplicated include from extcon-class.c
Drivers: hv: vmbus: hv_process_timer_expiration() can be static
Drivers: hv: vmbus: serialize Offer and Rescind offer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB patches from Greg KH:
"Here's the big pull request for the USB driver tree for 3.20-rc1.
Nothing major happening here, just lots of gadget driver updates, new
device ids, and a bunch of cleanups.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits)
usb: musb: fix device hotplug behind hub
usb: dwc2: Fix a bug in reading the endpoint directions from reg.
staging: emxx_udc: fix the build error
usb: Retry port status check on resume to work around RH bugs
Revert "usb: Reset USB-3 devices on USB-3 link bounce"
uhci-hub: use HUB_CHAR_*
usb: kconfig: replace PPC_OF with PPC
ehci-pci: disable for Intel MID platforms (update)
usb: gadget: Kconfig: use bool instead of boolean
usb: musb: blackfin: remove incorrect __exit_p()
USB: fix use-after-free bug in usb_hcd_unlink_urb()
ehci-pci: disable for Intel MID platforms
usb: host: pci_quirks: joing string literals
USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd)
USB: usbfs: allow URBs to be reaped after disconnection
cdc-acm: kill unnecessary messages
cdc-acm: add sanity checks
usb: phy: phy-generic: Fix USB PHY gpio reset
usb: dwc2: fix USB core dependencies
usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel()
...
|
|
Pull UBI and UBIFS updates from Richard Weinberger:
- cleanups and bug fixes all over UBI and UBIFS
- block-mq support for UBI Block
- UBI volumes can now be renamed while they are in use
- security.* XATTR support for UBIFS
- a maintainer update
* 'for-linus-v3.20' of git://git.infradead.org/linux-ubifs:
UBI: block: Fix checking for NULL instead of IS_ERR()
UBI: block: Continue creating ubiblocks after an initialization error
UBIFS: return -EINVAL if log head is empty
UBI: Block: Explain usage of blk_rq_map_sg()
UBI: fix soft lockup in ubi_check_volume()
UBI: Fastmap: Care about the protection queue
UBIFS: add a couple of extra asserts
UBI: do propagate positive error codes up
UBI: clean-up printing helpers
UBI: extend UBI layer debug/messaging capabilities - cosmetics
UBIFS: add ubifs_err() to print error reason
UBIFS: Add security.* XATTR support for the UBIFS
UBIFS: Add xattr support for symlinks
UBI: Block: Add blk-mq support
UBI: Add initial support for scatter gather
UBI: rename_volumes: Use UBI_METAONLY
UBI: Implement UBI_METAONLY
Add myself as UBI co-maintainer
|
|
This field is unused and uninitialized since commit 9a11b49a8056
("[PATCH] lockdep: better lock debugging")
Signed-off-by: Adrien Schildknecht <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux
Pull ACCESS_ONCE() rule tightening from Christian Borntraeger:
"Tighten rules for ACCESS_ONCE
This series tightens the rules for ACCESS_ONCE to only work on scalar
types. It also contains the necessary fixups as indicated by build
bots of linux-next. Now everything is in place to prevent new
non-scalar users of ACCESS_ONCE and we can continue to convert code to
READ_ONCE/WRITE_ONCE"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux:
kernel: Fix sparse warning for ACCESS_ONCE
next: sh: Fix compile error
kernel: tighten rules for ACCESS ONCE
mm/gup: Replace ACCESS_ONCE with READ_ONCE
x86/spinlock: Leftover conversion ACCESS_ONCE->READ_ONCE
x86/xen/p2m: Replace ACCESS_ONCE with READ_ONCE
ppc/hugetlbfs: Replace ACCESS_ONCE with READ_ONCE
ppc/kvm: Replace ACCESS_ONCE with READ_ONCE
|
|
No functional change, just clean up the most obvious.
Signed-off-by: Jesper Nilsson <[email protected]>
|
|
While working on arch/cris/include/asm/uaccess.h, I noticed
that some macros within this header are made harder to read because they
violate a coding style rule: space is missing after comma.
Fix it up.
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Jesper Nilsson <[email protected]>
|
|
virtio wants to read bitwise types from userspace using get_user. At the
moment this triggers sparse errors, since the value is passed through an
integer.
Fix that up using __force.
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Jesper Nilsson <[email protected]>
|
|
Remove unnecessary KERN_INFO in sync_serial.c
Signed-off-by: Masanari Iida <[email protected]>
Signed-off-by: Jesper Nilsson <[email protected]>
|
|
Pull crypto update from Herbert Xu:
"Here is the crypto update for 3.20:
- Added 192/256-bit key support to aesni GCM.
- Added MIPS OCTEON MD5 support.
- Fixed hwrng starvation and race conditions.
- Added note that memzero_explicit is not a subsitute for memset.
- Added user-space interface for crypto_rng.
- Misc fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits)
crypto: tcrypt - do not allocate iv on stack for aead speed tests
crypto: testmgr - limit IV copy length in aead tests
crypto: tcrypt - fix buflen reminder calculation
crypto: testmgr - mark rfc4106(gcm(aes)) as fips_allowed
crypto: caam - fix resource clean-up on error path for caam_jr_init
crypto: caam - pair irq map and dispose in the same function
crypto: ccp - terminate ccp_support array with empty element
crypto: caam - remove unused local variable
crypto: caam - remove dead code
crypto: caam - don't emit ICV check failures to dmesg
hwrng: virtio - drop extra empty line
crypto: replace scatterwalk_sg_next with sg_next
crypto: atmel - Free memory in error path
crypto: doc - remove colons in comments
crypto: seqiv - Ensure that IV size is at least 8 bytes
crypto: cts - Weed out non-CBC algorithms
MAINTAINERS: add linux-crypto to hw random
crypto: cts - Remove bogus use of seqiv
crypto: qat - don't need qat_auth_state struct
crypto: algif_rng - fix sparse non static symbol warning
...
|
|
Merge fourth set of updates from Andrew Morton:
- the rest of lib/
- checkpatch updates
- a few misc things
- kasan: kernel address sanitizer
- the rtc tree
* emailed patches from Andrew Morton <[email protected]>: (108 commits)
ARM: mvebu: enable Armada 38x RTC driver in mvebu_v7_defconfig
ARM: mvebu: add Device Tree description of RTC on Armada 38x
MAINTAINERS: add the RTC driver for the Armada38x
drivers/rtc/rtc-armada38x: add a new RTC driver for recent mvebu SoCs
rtc: armada38x: add the device tree binding documentation
rtc: rtc-ab-b5ze-s3: add sub-minute alarm support
rtc: add support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip
of: add vendor prefix for Abracon Corporation
drivers/rtc/rtc-rk808.c: fix rtc time reading issue
drivers/rtc/rtc-isl12057.c: constify struct regmap_config
drivers/rtc/rtc-at91sam9.c: constify struct regmap_config
drivers/rtc/rtc-imxdi.c: add more known register bits
drivers/rtc/rtc-imxdi.c: trivial clean up code
ARM: mvebu: ISL12057 rtc chip can now wake up RN102, RN102 and RN2120
rtc: rtc-isl12057: add isil,irq2-can-wakeup-machine property for in-tree users
drivers/rtc/rtc-isl12057.c: add alarm support to Intersil ISL12057 RTC driver
drivers/rtc/rtc-pcf2123.c: add support for devicetree
kprobes: makes kprobes/enabled works correctly for optimized kprobes.
kprobes: set kprobes_all_disarmed earlier to enable re-optimization.
init: remove CONFIG_INIT_FALLBACK
...
|
|
Now that the Armada 38x RTC driver has been pushed, let's enable it in
mvebu_v7_defconfig.
Signed-off-by: Gregory CLEMENT <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Sebastian Hesselbarth <[email protected]>
Cc: Arnaud Ebalard <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: Ezequiel Garcia <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Boris BREZILLON <[email protected]>
Cc: Lior Amsalem <[email protected]>
Cc: Tawfik Bayouk <[email protected]>
Cc: Nadav Haklai <[email protected]>
Cc: Mark Rutland <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The Marvell Armada 38x SoCs contains an RTC which differs from the RTC
used in the other mvebu SoCs until now. This commit adds the Device Tree
description of this interface at the SoC level.
Signed-off-by: Gregory CLEMENT <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Sebastian Hesselbarth <[email protected]>
Cc: Arnaud Ebalard <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: Ezequiel Garcia <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Boris BREZILLON <[email protected]>
Cc: Lior Amsalem <[email protected]>
Cc: Tawfik Bayouk <[email protected]>
Cc: Nadav Haklai <[email protected]>
Cc: Mark Rutland <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Put it in the mvebu entry.
Signed-off-by: Gregory CLEMENT <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Sebastian Hesselbarth <[email protected]>
Cc: Arnaud Ebalard <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: Ezequiel Garcia <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Boris BREZILLON <[email protected]>
Cc: Lior Amsalem <[email protected]>
Cc: Tawfik Bayouk <[email protected]>
Cc: Nadav Haklai <[email protected]>
Cc: Mark Rutland <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The new mvebu SoCs come with a new RTC driver. This patch adds the
support for this new IP which is currently found in the Armada 38x
SoCs.
This RTC provides two alarms, but only the first one is used in the
driver. The RTC also allows using periodic interrupts.
Signed-off-by: Gregory CLEMENT <[email protected]>
Reviewed-by: Arnaud Ebalard <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Sebastian Hesselbarth <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: Ezequiel Garcia <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Boris BREZILLON <[email protected]>
Cc: Lior Amsalem <[email protected]>
Cc: Tawfik Bayouk <[email protected]>
Cc: Nadav Haklai <[email protected]>
Cc: Mark Rutland <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The Marvell Armada 38x SoCs contains an RTC which differs from the RTC
used in the other mvebu SoCs until now. This forth version of the patch
set adds support for this new IP and enable it in the Device Tree of the
Armada 38x SoC.
This patch (of 5):
The Armada 38x SoCs come with a new RTC which differs from the one used in
the other mvebu SoCs until now. This patch describes the binding of this
RTC.
Signed-off-by: Gregory CLEMENT <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Sebastian Hesselbarth <[email protected]>
Cc: Arnaud Ebalard <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: Ezequiel Garcia <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Boris BREZILLON <[email protected]>
Cc: Lior Amsalem <[email protected]>
Cc: Tawfik Bayouk <[email protected]>
Cc: Nadav Haklai <[email protected]>
Cc: Mark Rutland <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Abracon AB-RTCMC-32.768kHz-B5ZE-S3 alarm is only accurate to the minute.
For that reason, UIE mode is currently not supported by the driver. But
the device provides a watchdog timer which can be coupled with the alarm
mechanism to extend support and provide sub-minute alarm capability.
This patch implements that extension. More precisely, it makes use of the
watchdog timer for alarms which are less that four minutes in the future
(with second accuracy) and use standard alarm mechanism for other alarms
(with minute accuracy).
Signed-off-by: Arnaud Ebalard <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Peter Huewe <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Pawel Moll <[email protected]>
Cc: Stephen Warren <[email protected]>
Cc: Ian Campbell <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: Rob Landley <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kumar Gala <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patch adds support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3
RTC/Calendar module w/ I2C interface.
This support includes RTC time reading and setting, Alarm (1 minute
accuracy) reading and setting, and battery low detection. The device also
supports frequency adjustment and two timers but those features are
currently not implemented in this driver. Due to alarm accuracy
limitation (and current lack of timer support in the driver), UIE mode is
not supported.
Signed-off-by: Arnaud Ebalard <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Peter Huewe <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Pawel Moll <[email protected]>
Cc: Stephen Warren <[email protected]>
Cc: Ian Campbell <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: Rob Landley <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kumar Gala <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This series adds support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC
chip. Unlike many RTC chips, it includes an internal oscillator which
spares room on the PCB. It also has some interesting features, like
battery low detection (which the driver in this series supports). The
only small "limitation" (mainly due to what RTC subsystem expects from
RTC chips) is the fact that its alarm is accurate to the second. This
series provides a solution (described below) for that limitation using
another mechanism of the chip.
I decided to split support between three different patches for
this v0:
- Patch 1/3: it simply references Abracon Corporation in vendor-prefixes
documentation file. As Abracon has no NASDAQ ticker symbol; I have
decided to use "abcn" (I initially started my work w/ "ab" but later
changed for "abcn" which looked more meaningful)
- Patch 2/3: it adds initial support for the chip and provides the
ability to read/write time and also read/write alarm. As the alarm
the chip provides is accurate to the minute, the support provided
by this patch also has this limitation (e.g. UIE mode is not
supported).
- Patch 3/3: the chip supports a watchdog timer which can be used to
extend the alarm mechanism in patch 2/3 in order to provide support
for alarms under one minute (e.g. support UIE mode). In practice,
the logic I implemented is to use the watchdog timer for alarms which
are at most 4 minutes in the future and use the common alarm mechanism
for alarms which are set to larger values. With that additional patch
the device fully passes the rtctest.c program.
I decided to split the driver between two patches (2 and 3 of 3) in
order to ease review: patch 2 should be pretty straightforward to read
for someone familiar w/ RTC subsystem. Patch 3 only extends what is in
patch 2 regarding alarms.
This patch (of 3):
Documentation/devicetree/bindings/vendor-prefixes.txt: add vendor prefix
for Abracon Corporation
Signed-off-by: Arnaud Ebalard <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Peter Huewe <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Pawel Moll <[email protected]>
Cc: Stephen Warren <[email protected]>
Cc: Ian Campbell <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: Rob Landley <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kumar Gala <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
After we set the GET_TIME bit, the rtc time can't be read immediately. We
should wait up to 31.25 us, about one cycle of 32khz. Otherwise reading
RTC time will return a old time. If we clear the GET_TIME bit after
setting, the time of i2c transfer is certainly more than 31.25us.
Doug said:
: I think we are safe. At 400kHz (the max speed of this part) each bit can
: be transferred no faster than 2.5us. In order to do a valid i2c
: transaction we need to _at least_ write the address of the device and the
: data onto the bus, which is 16 bits. 16 * 2.5us = 40us. That's above the
: 31.25us
[[email protected]: tweak comment per review discussion]
Signed-off-by: Chris Zhong <[email protected]>
Reviewed-by: Doug Anderson <[email protected]>
Cc: Sonny Rao <[email protected]>
Cc: Heiko Stübner <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The regmap_config struct may be const because it is not modified by the
driver and regmap_init() accepts pointer to const.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The regmap_config struct may be const because it is not modified by the
driver and regmap_init() accepts pointer to const.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Intended for monitoring and controlling the security features. These bits
are required to bring this unit back to live after a security violation
event was detected. The code to bring it back to live will follow after a
vendor clearance.
Signed-off-by: Juergen Borleis <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Signed-off-by: Juergen Borleis <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Now that alarm support for ISL12057 chip is available w/ the specific
"isil,irq2-can-wakeup-machine" property, let's use that feature of the
driver dedicated to NETGEAR ReadyNAS 102, 104 and 2120 specific routing of
RTC Alarm IRQ#2 pin; on those devices, this pin is not connected to the
SoC but to a PMIC, which allows the device to be powered up when RTC alarm
rings.
For that to work, the chip needs to be explicitly marked as a device
wakeup source using this "isil,irq2-can-wakeup-machine" boolean property.
This makes 'wakealarm' sysfs entry available to configure the alarm.
Signed-off-by: Arnaud Ebalard <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Peter Huewe <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Darshana Padmadas <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Pawel Moll <[email protected]>
Cc: Stephen Warren <[email protected]>
Cc: Ian Campbell <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: Rob Landley <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: Uwe Kleine-König <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Current in-tree users of ISL12057 RTC chip (NETGEAR ReadyNAS 102, 104 and
2120) do not have the IRQ#2 pin of the chip (associated w/ the Alarm1
mechanism) connected to their SoC, but to a PMIC (TPS65251 FWIW). This
specific hardware configuration allows the NAS to wake up when the alarms
rings.
Recently introduced alarm support for ISL12057 relies on the provision of
an "interrupts" property in system .dts file, which previous three users
will never get. For that reason, alarm support on those devices is not
function. To support this use case, this patch adds a new DT property for
ISL12057 (isil,irq2-can-wakeup-machine) to indicate that the chip is
capable of waking up the device using its IRQ#2 pin (even though it does
not have its IRQ#2 pin connected directly to the SoC).
This specific configuration was tested on a ReadyNAS 102 by setting an
alarm, powering off the device and see it reboot as expected when the
alarm rang w/:
# echo `date '+%s' -d '+ 1 minutes'` > /sys/class/rtc/rtc0/wakealarm
# shutdown -h now
As a side note, the ISL12057 remains in the list of trivial devices,
because the property is not per se required by the device to work but can
help handle system w/ specific requirements. In exchange, the new feature
is described in details in a specific documentation file.
Signed-off-by: Arnaud Ebalard <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Peter Huewe <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Darshana Padmadas <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Pawel Moll <[email protected]>
Cc: Stephen Warren <[email protected]>
Cc: Ian Campbell <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: Rob Landley <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: Uwe Kleine-König <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patch adds alarm support to Intersil ISL12057 driver. This allows to
configure the chip to generate an interrupt when the alarm matches current
time value. Alarm can be programmed up to one month in the future and is
accurate to the second.
The patch was developed to support two different configurations: systems
w/ and w/o RTC chip IRQ line connected to the main CPU.
The latter is the one found on current 3 kernel users of the chip for
which support was initially developed (Netgear ReadyNAS 102, 104 and 2120
NAS). On those devices, the IRQ#2 pin of the chip is not connected to the
SoC but to a PMIC. This allows setting an alarm, powering off the device
and have it wake up when the alarm rings. To support that configuration
the driver does the following:
1. it has alarm_irq_enable() function returns -ENOTTY when no IRQ
is passed to the driver.
2. it marks the device as a wakeup source in all cases (whether an
IRQ is passed to the driver or not) to have 'wakealarm' sysfs
entry created.
3. it marks the device has not supporting UIE mode when no IRQ is
passed to the driver (see the commmit message of c9f5c7e7a84f)
This specific configuration was tested on a ReadyNAS 102 by setting an
alarm, powering off the device and see it reboot as expected when the
alarm rang.
The former configuration was tested on a Netgear ReadyNAS 102 after some
soldering of the IRQ#2 pin of the RTC chip to a MPP line of the SoC (the
one used usually handles the reset button). The test was performed using
a modified .dts file reflecting this change (see below) and rtc-test.c
program available in Documentation/rtc.txt. This test program ran as
expected, which validates alarm supports, including interrupt support.
As a side note, the ISL12057 remains in the list of trivial devices, i.e.
no specific DT binding being added by this patch: i2c core automatically
handles extraction of IRQ line info from .dts file. For instance, if one
wants to reference the interrupt line for the alarm in its .dts file,
adding interrupt and interrupt-parent properties works as expected:
isl12057: isl12057@68 {
compatible =3D "isil,isl12057";
interrupt-parent =3D <&gpio0>;
interrupts =3D <6 IRQ_TYPE_EDGE_FALLING>;
reg =3D <0x68>;
};
FWIW, if someone is looking for a way to test alarm support on a system on
which the chip IRQ line has the ability to boot the system (e.g. ReadyNAS
102, 104, etc):
# echo 0 > /sys/class/rtc/rtc0/wakealarm
# echo `date '+%s' -d '+ 1 minutes'` > /sys/class/rtc/rtc0/wakealarm
# shutdown -h now
With the commands above, after a minute, the system comes back to life.
Signed-off-by: Arnaud Ebalard <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Peter Huewe <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: Uwe Kleine-König <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add compatible string "nxp,rtc-pcf2123"
Document the binding
Signed-off-by: Joshua Clayton <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Grant Likely <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
debugfs/kprobes/enabled doesn't work correctly on optimized kprobes.
Masami Hiramatsu has a test report on x86_64 platform:
https://lkml.org/lkml/2015/1/19/274
This patch forces it to unoptimize kprobe if kprobes_all_disarmed is set.
It also checks the flag in unregistering path for skipping unneeded
disarming process when kprobes globally disarmed.
Signed-off-by: Wang Nan <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In original code, the probed instruction doesn't get optimized after
echo 0 > /sys/kernel/debug/kprobes/enabled
echo 1 > /sys/kernel/debug/kprobes/enabled
This is because original code checks kprobes_all_disarmed in
optimize_kprobe(), but this flag is turned off after calling that
function. Therefore, optimize_kprobe() will see kprobes_all_disarmed ==
true and doesn't do the optimization.
This patch simply turns off kprobes_all_disarmed earlier to enable
optimization.
Signed-off-by: Wang Nan <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Cc: Ingo Molnar <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
CONFIG_INIT_FALLBACK adds config bloat without an obvious use case that
makes it worth keeping around. Delete it.
Signed-off-by: Andy Lutomirski <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Chuck Ebbert <[email protected]>
Cc: Frank Rowand <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Rob Landley <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This feature let us to detect accesses out of bounds of global variables.
This will work as for globals in kernel image, so for globals in modules.
Currently this won't work for symbols in user-specified sections (e.g.
__init, __read_mostly, ...)
The idea of this is simple. Compiler increases each global variable by
redzone size and add constructors invoking __asan_register_globals()
function. Information about global variable (address, size, size with
redzone ...) passed to __asan_register_globals() so we could poison
variable's redzone.
This patch also forces module_alloc() to return 8*PAGE_SIZE aligned
address making shadow memory handling (
kasan_module_alloc()/kasan_module_free() ) more simple. Such alignment
guarantees that each shadow page backing modules address space correspond
to only one module_alloc() allocation.
Signed-off-by: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Cc: Dmitry Chernenkov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Yuri Gribov <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
MODULE_DEVICE_TABLE() macro used to create aliases to device tables.
Normally alias should have the same type as aliased symbol.
Device tables are arrays, so they have 'struct type##_device_id[x]'
types. Alias created by MODULE_DEVICE_TABLE() will have non-array type -
'struct type##_device_id'.
This inconsistency confuses compiler, it could make a wrong assumption
about variable's size which leads KASan to produce a false positive report
about out of bounds access.
For every global variable compiler calls __asan_register_globals() passing
information about global variable (address, size, size with redzone, name
...) __asan_register_globals() poison symbols redzone to detect possible
out of bounds accesses.
When symbol has an alias __asan_register_globals() will be called as for
symbol so for alias. Compiler determines size of variable by size of
variable's type. Alias and symbol have the same address, so if alias have
the wrong size part of memory that actually belongs to the symbol could be
poisoned as redzone of alias symbol.
By fixing type of alias symbol we will fix size of it, so
__asan_register_globals() will not poison valid memory.
Signed-off-by: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Cc: Dmitry Chernenkov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Yuri Gribov <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
KASan uses constructors for initializing redzones for global variables.
Globals instrumentation in GCC 4.9.2 produces constructors with priority
(.init_array.00099)
Currently kernel ignores such constructors. Only constructors with
default priority supported (.init_array)
This patch adds support for constructors with priorities. For kernel
image we put pointers to constructors between __ctors_start/__ctors_end
and do_ctors() will call them on start up. For modules we merge
.init_array.* sections into resulting .init_array. Module code properly
handles constructors in .init_array section.
Signed-off-by: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Cc: Dmitry Chernenkov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Yuri Gribov <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
For instrumenting global variables KASan will shadow memory backing memory
for modules. So on module loading we will need to allocate memory for
shadow and map it at address in shadow that corresponds to the address
allocated in module_alloc().
__vmalloc_node_range() could be used for this purpose, except it puts a
guard hole after allocated area. Guard hole in shadow memory should be a
problem because at some future point we might need to have a shadow memory
at address occupied by guard hole. So we could fail to allocate shadow
for module_alloc().
Now we have VM_NO_GUARD flag disabling guard page, so we need to pass into
__vmalloc_node_range(). Add new parameter 'vm_flags' to
__vmalloc_node_range() function.
Signed-off-by: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Cc: Dmitry Chernenkov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Yuri Gribov <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
For instrumenting global variables KASan will shadow memory backing memory
for modules. So on module loading we will need to allocate memory for
shadow and map it at address in shadow that corresponds to the address
allocated in module_alloc().
__vmalloc_node_range() could be used for this purpose, except it puts a
guard hole after allocated area. Guard hole in shadow memory should be a
problem because at some future point we might need to have a shadow memory
at address occupied by guard hole. So we could fail to allocate shadow
for module_alloc().
Add a new vm_struct flag 'VM_NO_GUARD' indicating that vm area doesn't
have a guard hole.
Signed-off-by: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Cc: Dmitry Chernenkov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Yuri Gribov <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Stack instrumentation allows to detect out of bounds memory accesses for
variables allocated on stack. Compiler adds redzones around every
variable on stack and poisons redzones in function's prologue.
Such approach significantly increases stack usage, so all in-kernel stacks
size were doubled.
Signed-off-by: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Cc: Dmitry Chernenkov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Yuri Gribov <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Recently instrumentation of builtin functions calls was removed from GCC
5.0. To check the memory accessed by such functions, userspace asan
always uses interceptors for them.
So now we should do this as well. This patch declares
memset/memmove/memcpy as weak symbols. In mm/kasan/kasan.c we have our
own implementation of those functions which checks memory before accessing
it.
Default memset/memmove/memcpy now now always have aliases with '__'
prefix. For files that built without kasan instrumentation (e.g.
mm/slub.c) original mem* replaced (via #define) with prefixed variants,
cause we don't want to check memory accesses there.
Signed-off-by: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Cc: Dmitry Chernenkov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Yuri Gribov <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This is a test module doing various nasty things like out of bounds
accesses, use after free. It is useful for testing kernel debugging
features like kernel address sanitizer.
It mostly concentrates on testing of slab allocator, but we might want to
add more different stuff here in future (like stack/global variables out
of bounds accesses and so on).
Signed-off-by: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Cc: Dmitry Chernenkov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Yuri Gribov <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kmalloc internally round up allocation size, and kmemleak uses rounded up
size as object's size. This makes kasan to complain while kmemleak scans
memory or calculates of object's checksum. The simplest solution here is
to disable kasan.
Signed-off-by: Andrey Ryabinin <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Cc: Dmitry Chernenkov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Yuri Gribov <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
We need to manually unpoison rounded up allocation size for dname to avoid
kasan's reports in dentry_string_cmp(). When CONFIG_DCACHE_WORD_ACCESS=y
dentry_string_cmp may access few bytes beyound requested in kmalloc()
size.
dentry_string_cmp() relates on that fact that dentry allocated using
kmalloc and kmalloc internally round up allocation size. So this is not a
bug, but this makes kasan to complain about such accesses. To avoid such
reports we mark rounded up allocation size in shadow as accessible.
Signed-off-by: Andrey Ryabinin <[email protected]>
Reported-by: Dmitry Vyukov <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Cc: Dmitry Chernenkov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Yuri Gribov <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
With this patch kasan will be able to catch bugs in memory allocated by
slub. Initially all objects in newly allocated slab page, marked as
redzone. Later, when allocation of slub object happens, requested by
caller number of bytes marked as accessible, and the rest of the object
(including slub's metadata) marked as redzone (inaccessible).
We also mark object as accessible if ksize was called for this object.
There is some places in kernel where ksize function is called to inquire
size of really allocated area. Such callers could validly access whole
allocated memory, so it should be marked as accessible.
Code in slub.c and slab_common.c files could validly access to object's
metadata, so instrumentation for this files are disabled.
Signed-off-by: Andrey Ryabinin <[email protected]>
Signed-off-by: Dmitry Chernenkov <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Yuri Gribov <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
It's ok for slub to access memory that marked by kasan as inaccessible
(object's metadata). Kasan shouldn't print report in that case because
these accesses are valid. Disabling instrumentation of slub.c code is not
enough to achieve this because slub passes pointer to object's metadata
into external functions like memchr_inv().
We don't want to disable instrumentation for memchr_inv() because this is
quite generic function, and we don't want to miss bugs.
metadata_access_enable/metadata_access_disable used to tell KASan where
accesses to metadata starts/end, so we could temporarily disable KASan
reports.
Signed-off-by: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Konstantin Serebryany <[email protected]>
Cc: Dmitry Chernenkov <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Yuri Gribov <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|