aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-10-08iwlwifi: pcie: fix xtal latency for 9560 devicesLuca Coelho3-5/+15
We were using a very high latency for all 9560 devices so they all would have time to stabilize. But this causes the system to be slighly slower, so we can use the best values for each device. This requires a new trans cfg struct for devices with longer latency and some adjustments to the other structs. Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008181047.34392f98fdb1.I3d3db14f6d1a8ecc547ca6afce8488816bd26081@changeid
2020-10-08mm: avoid early COW write protect games during fork()Linus Torvalds1-37/+4
In commit 70e806e4e645 ("mm: Do early cow for pinned pages during fork() for ptes") we write-protected the PTE before doing the page pinning check, in order to avoid a race with concurrent fast-GUP pinning (which doesn't take the mm semaphore or the page table lock). That trick doesn't actually work - it doesn't handle memory ordering properly, and doing so would be prohibitively expensive. It also isn't really needed. While we're moving in the direction of allowing and supporting page pinning without marking the pinned area with MADV_DONTFORK, the fact is that we've never really supported this kind of odd "concurrent fork() and page pinning", and doing the serialization on a pte level is just wrong. We can add serialization with a per-mm sequence counter, so we know how to solve that race properly, but we'll do that at a more appropriate time. Right now this just removes the write protect games. It also turns out that the write protect games actually break on Power, as reported by Aneesh Kumar: "Architecture like ppc64 expects set_pte_at to be not used for updating a valid pte. This is further explained in commit 56eecdb912b5 ("mm: Use ptep/pmdp_set_numa() for updating _PAGE_NUMA bit")" and the code triggered a warning there: WARNING: CPU: 0 PID: 30613 at arch/powerpc/mm/pgtable.c:185 set_pte_at+0x2a8/0x3a0 arch/powerpc/mm/pgtable.c:185 Call Trace: copy_present_page mm/memory.c:857 [inline] copy_present_pte mm/memory.c:899 [inline] copy_pte_range mm/memory.c:1014 [inline] copy_pmd_range mm/memory.c:1092 [inline] copy_pud_range mm/memory.c:1127 [inline] copy_p4d_range mm/memory.c:1150 [inline] copy_page_range+0x1f6c/0x2cc0 mm/memory.c:1212 dup_mmap kernel/fork.c:592 [inline] dup_mm+0x77c/0xab0 kernel/fork.c:1355 copy_mm kernel/fork.c:1411 [inline] copy_process+0x1f00/0x2740 kernel/fork.c:2070 _do_fork+0xc4/0x10b0 kernel/fork.c:2429 Link: https://lore.kernel.org/lkml/CAHk-=wiWr+gO0Ro4LvnJBMs90OiePNyrE3E+pJvc9PzdBShdmw@mail.gmail.com/ Link: https://lore.kernel.org/linuxppc-dev/[email protected]/ Reported-by: Aneesh Kumar K.V <[email protected]> Tested-by: Leon Romanovsky <[email protected]> Cc: Peter Xu <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: John Hubbard <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Jan Kara <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Kirill Shutemov <[email protected]> Cc: Hugh Dickins <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-10-08iwlwifi: pcie: fix 0x271B and 0x271C trans cfg structLuca Coelho1-2/+2
The 0x271B and 0x271C devices are part of the 9000 series (discrete), and not 9560 (integrated). Fix it accordingly. Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.5cc1809940d2.If0d1e0b91fa99486403d276cf7c0fe7680a7ca2a@changeid
2020-10-08iwlwifi: mvm: avoid possible NULL pointer dereferenceAvraham Stern1-8/+6
When adding a PASN station, the station is added to the list only if a TK is configured. Otherwise the station pointer should not be used. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.b8a493c168a7.Ie9a0f9dfd9e9c58c603dd06e45151119467a7804@changeid
2020-10-08iwlwifi: mvm: support ADD_STA_CMD_API_S ver 12Nathan Errera7-19/+102
ADD_STA_CMD_API_S ver 12 was added in order to properly support auxiliary activities in CDB NICs. In the new version we don't need to allocate an aux station at initialization, instead we add an aux station only when an auxiliary activity that requires a dedicated Tx queue is needed. For now the only case we need this kind of activity is when using hot spot 2.0 Signed-off-by: Nathan Errera <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.700e6e2e3077.Icdd807b6a3ad3fed806449ea0a13f856aa20e632@changeid
2020-10-08iwlwifi: mvm: add a get lmac id functionNathan Errera4-20/+20
As some functions need to check which lmac id to use, add a new function to find the lmac id instead of open coding it in every function. Signed-off-by: Nathan Errera <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.ac3b43e97aa8.I308f8ed2238e32d5eef9c35ad7962f0e8b9c1902@changeid
2020-10-08iwlwifi: mvm: prepare roc_done_wk to work syncNathan Errera6-29/+26
As part of changes made to properly support auxiliary activities in CDB NICs, an aux sta will be added when using hot spot 2.0 and will need to be removed when roc flow is done. In order to do so, prepare the roc_done_wk to work synchronously as the rm_aux_sta is a SYNC command. Since now all of th iwl_mvm_flush_sta function are using it sync, removed the flag argument from the function. Signed-off-by: Nathan Errera <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.71b441c8b682.Ia1d216cb680308b91d6da9f73e23ae9f4baac79f@changeid
2020-10-08iwlwifi: mvm: re-enable TX after channel switchSara Sharon2-6/+2
The FW relies on the re-enablement of the TX in order to know it can exit quiet mode. Currently in case of CSA with quiet mode, the quiet mode is never cancelled, resulting in a complete traffic hang. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.fee389c83ded.I09550fdadb61f899242d7e7b7578672372e2b7fe@changeid
2020-10-08iwlwifi: mvm: don't send RFH_QUEUE_CONFIG_CMD with no queuesLuca Coelho1-1/+8
If we have only a single RX queue, such as when MSI-X is not available, we should not send the RFH_QUEUEU_CONFIG_CMD, because our only queue is the same as the command queue and will be configured as part of the context info. Our code was actually trying to send the command with 0 queues, which caused UMAC assert 0x1D04. Fix that by not sending the command when we have a single queue. Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.c35eeb3299f8.I08f79a6ebe150a7d180b7005b24504bfdba6d8b5@changeid
2020-10-08iwlwifi: support an additional Qu subsystem idGolan Ben Ami1-0/+1
Add PCI subsystem ID 0x6074 for Qu family. Signed-off-by: Golan Ben Ami <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.fba1c29fc217.I7d47c8de078d48cfc1c98ce1086e71d8d2ebb980@changeid
2020-10-08iwlwifi: mvm: stop claiming NL80211_EXT_FEATURE_SET_SCAN_DWELLJohannes Berg1-2/+0
We've removed the code that handles it appropriately, so stop claiming we support it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.3b8936035273.I7799caa225295de44558e9da093b720afe606359@changeid
2020-10-08iwlwifi: mvm: ring the doorbell and wait for PNVM load completionLuca Coelho3-0/+65
When we receive a non-zero SKU_ID in the alive notification, we need to ring the doorbell and wait for the FW to send us a PNVM load complete notification before we continue the init phase. Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.a10e8b6bbcf9.Ib5d10b3d508a4d2d4e6b7b629af89d76f4f03d81@changeid
2020-10-08iwlwifi: update prph scratch structure to include PNVM dataLuca Coelho1-9/+9
The ROR structure was replaced by the PNVM structure. They are functionally identical, only the names have changed. For now we keep them set to 0, which means that the PNVM was not found and should not be loaded. Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.065c5abcb913.Ifebf7fe47025d720ed58dda0b7ba389b473fe590@changeid
2020-10-08iwlwifi: mvm: read and parse SKU ID if availableLuca Coelho2-3/+23
In v5 of the ALIVE notification, we may receive the SKU ID of the device in use. Read and store it locally for future access. This will be needed to find the correct PNVM (platform NVM) to pass to the firmware. Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.798744ad514e.Ibb0d88586a34acc904bf319974d791faafb7a905@changeid
2020-10-08iwlwifi: mvm: get number of stations from TLVNathan Errera18-38/+56
FW is changing the max number of supported stations. To adapt to the change we get the max number from the TLV and act according to the new number. Signed-off-by: Nathan Errera <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201008180656.863ab470babc.I393223392f36436663c4e66add03fefe77b74e60@changeid
2020-10-08rtlwifi: rtl8192se: remove duplicated legacy_httxpowerdiffChris Chiu3-3/+2
The legacy_httxpowerdiff in rtl8192se is pretty much the same as the legacy_ht_txpowerdiff for other chips. Use the same name to keep the consistency. Signed-off-by: Chris Chiu <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08mwifiex: fix double freeTom Rix1-0/+2
clang static analysis reports this problem: sdio.c:2403:3: warning: Attempt to free released memory kfree(card->mpa_rx.buf); ^~~~~~~~~~~~~~~~~~~~~~~ When mwifiex_init_sdio() fails in its first call to mwifiex_alloc_sdio_mpa_buffer, it falls back to calling it again. If the second alloc of mpa_tx.buf fails, the error handler will try to free the old, previously freed mpa_rx.buf. Reviewing the code, it looks like a second double free would happen with mwifiex_cleanup_sdio(). So set both pointers to NULL when they are freed. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Tom Rix <[email protected]> Reviewed-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08ath11k: Fix memory leak on error pathAlex Dewar1-1/+3
In ath11k_mac_setup_iface_combinations(), if memory cannot be assigned for the variable limits, then the memory assigned to combinations will be leaked. Fix this. Addresses-Coverity-ID: 1497534 ("Resource leaks") Fixes: 2626c269702e ("ath11k: add interface_modes to hw_params") Signed-off-by: Alex Dewar <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: iwl-drv: Provide descriptions debugfs dentriesLee Jones1-1/+4
Also demote a non-conforming kernel-doc function header. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/iwl-drv.c:124: warning: Function parameter or member 'dbgfs_drv' not described in 'iwl_drv' drivers/net/wireless/intel/iwlwifi/iwl-drv.c:124: warning: Function parameter or member 'dbgfs_trans' not described in 'iwl_drv' drivers/net/wireless/intel/iwlwifi/iwl-drv.c:124: warning: Function parameter or member 'dbgfs_op_mode' not described in 'iwl_drv' drivers/net/wireless/intel/iwlwifi/iwl-drv.c:1329: warning: Function parameter or member 'ucode_raw' not described in 'iwl_req_fw_callback' drivers/net/wireless/intel/iwlwifi/iwl-drv.c:1329: warning: Function parameter or member 'context' not described in 'iwl_req_fw_callback' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: dvm: devices: Fix function documentation formatting issuesLee Jones1-4/+4
Kerneldoc expects attributes/parameters to be in '@*.: ' format and gets confused if the variable does not follow the type/attribute definitions. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/dvm/devices.c:66: warning: Function parameter or member 'priv' not described in 'iwl_beacon_time_mask_low' drivers/net/wireless/intel/iwlwifi/dvm/devices.c:66: warning: Function parameter or member 'tsf_bits' not described in 'iwl_beacon_time_mask_low' drivers/net/wireless/intel/iwlwifi/dvm/devices.c:77: warning: Function parameter or member 'priv' not described in 'iwl_beacon_time_mask_high' drivers/net/wireless/intel/iwlwifi/dvm/devices.c:77: warning: Function parameter or member 'tsf_bits' not described in 'iwl_beacon_time_mask_high' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: mvm: tx: Demote misuse of kernel-doc headersLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/mvm/tx.c:1379: warning: Function parameter or member 'rate_n_flags' not described in 'iwl_mvm_hwrate_to_tx_status' drivers/net/wireless/intel/iwlwifi/mvm/tx.c:1379: warning: Function parameter or member 'info' not described in 'iwl_mvm_hwrate_to_tx_status' drivers/net/wireless/intel/iwlwifi/mvm/tx.c:1431: warning: Function parameter or member 'mvm' not described in 'iwl_mvm_get_scd_ssn' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: dvm: rxon: Demote non-conformant kernel-doc headersLee Jones1-3/+3
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/dvm/rxon.c:695: warning: bad line: drivers/net/wireless/intel/iwlwifi/dvm/rxon.c:701: warning: Function parameter or member 'priv' not described in 'iwl_set_rxon_channel' drivers/net/wireless/intel/iwlwifi/dvm/rxon.c:701: warning: Function parameter or member 'ctx' not described in 'iwl_set_rxon_channel' drivers/net/wireless/intel/iwlwifi/dvm/rxon.c:839: warning: Function parameter or member 'ctx' not described in 'iwl_full_rxon_required' drivers/net/wireless/intel/iwlwifi/dvm/rxon.c:1029: warning: Function parameter or member 'priv' not described in 'iwlagn_commit_rxon' drivers/net/wireless/intel/iwlwifi/dvm/rxon.c:1029: warning: Function parameter or member 'ctx' not described in 'iwlagn_commit_rxon' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: dvm: scan: Demote a few nonconformant kernel-doc headersLee Jones1-5/+3
2 of which do not attempt to document their parameters, 1 does a poor job. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/dvm/scan.c:193: warning: Function parameter or member 'priv' not described in 'iwl_scan_cancel' drivers/net/wireless/intel/iwlwifi/dvm/scan.c:205: warning: Function parameter or member 'priv' not described in 'iwl_scan_cancel_timeout' drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'frame' not described in 'iwl_fill_probe_req' drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'ta' not described in 'iwl_fill_probe_req' drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'ies' not described in 'iwl_fill_probe_req' drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'ie_len' not described in 'iwl_fill_probe_req' drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'ssid' not described in 'iwl_fill_probe_req' drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'ssid_len' not described in 'iwl_fill_probe_req' drivers/net/wireless/intel/iwlwifi/dvm/scan.c:570: warning: Function parameter or member 'left' not described in 'iwl_fill_probe_req' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: mvm: utils: Fix some doc-rotLee Jones1-2/+5
Fix misnamed, and missing descriptions likely due to doc-rot. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/mvm/utils.c:669: warning: Function parameter or member 'mvm' not described in 'iwl_mvm_send_lq_cmd' drivers/net/wireless/intel/iwlwifi/mvm/utils.c:669: warning: Function parameter or member 'lq' not described in 'iwl_mvm_send_lq_cmd' drivers/net/wireless/intel/iwlwifi/mvm/utils.c:669: warning: Excess function parameter 'sync' description in 'iwl_mvm_send_lq_cmd' drivers/net/wireless/intel/iwlwifi/mvm/utils.c:695: warning: Function parameter or member 'mvm' not described in 'iwl_mvm_update_smps' drivers/net/wireless/intel/iwlwifi/mvm/utils.c:695: warning: Function parameter or member 'vif' not described in 'iwl_mvm_update_smps' drivers/net/wireless/intel/iwlwifi/mvm/utils.c:695: warning: Function parameter or member 'smps_request' not described in 'iwl_mvm_update_smps' drivers/net/wireless/intel/iwlwifi/mvm/utils.c:695: warning: Excess function parameter 'smps_requests' description in 'iwl_mvm_update_smps' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: dvm: Demote a couple of nonconformant kernel-doc headersLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/dvm/rx.c:145: warning: Function parameter or member 'priv' not described in 'iwlagn_good_plcp_health' drivers/net/wireless/intel/iwlwifi/dvm/rx.c:145: warning: Function parameter or member 'cur_ofdm' not described in 'iwlagn_good_plcp_health' drivers/net/wireless/intel/iwlwifi/dvm/rx.c:145: warning: Function parameter or member 'cur_ofdm_ht' not described in 'iwlagn_good_plcp_health' drivers/net/wireless/intel/iwlwifi/dvm/rx.c:145: warning: Function parameter or member 'msecs' not described in 'iwlagn_good_plcp_health' drivers/net/wireless/intel/iwlwifi/dvm/rx.c:939: warning: Function parameter or member 'priv' not described in 'iwl_setup_rx_handlers' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: mvm: ops: Remove unused static struct 'iwl_mvm_debug_names'Lee Jones1-9/+0
Looks as if it's never been used. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/mvm/ops.c:466:36: warning: ‘iwl_mvm_debug_names’ defined but not used [-Wunused-const-variable=] Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: dvm: sta: Demote a bunch of nonconformant kernel-doc headersLee Jones1-11/+11
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/dvm/sta.c:244: warning: Function parameter or member 'priv' not described in 'iwl_prep_station' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:244: warning: Function parameter or member 'ctx' not described in 'iwl_prep_station' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:244: warning: Function parameter or member 'addr' not described in 'iwl_prep_station' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:244: warning: Function parameter or member 'is_ap' not described in 'iwl_prep_station' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:244: warning: Function parameter or member 'sta' not described in 'iwl_prep_station' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:332: warning: Function parameter or member 'priv' not described in 'iwl_add_station_common' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:332: warning: Function parameter or member 'ctx' not described in 'iwl_add_station_common' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:332: warning: Function parameter or member 'addr' not described in 'iwl_add_station_common' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:332: warning: Function parameter or member 'is_ap' not described in 'iwl_add_station_common' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:332: warning: Function parameter or member 'sta' not described in 'iwl_add_station_common' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:332: warning: Function parameter or member 'sta_id_r' not described in 'iwl_add_station_common' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:390: warning: Function parameter or member 'priv' not described in 'iwl_sta_ucode_deactivate' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:390: warning: Function parameter or member 'sta_id' not described in 'iwl_sta_ucode_deactivate' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:459: warning: Function parameter or member 'priv' not described in 'iwl_remove_station' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:459: warning: Function parameter or member 'sta_id' not described in 'iwl_remove_station' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:459: warning: Function parameter or member 'addr' not described in 'iwl_remove_station' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:614: warning: Function parameter or member 'priv' not described in 'iwl_clear_ucode_stations' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:614: warning: Function parameter or member 'ctx' not described in 'iwl_clear_ucode_stations' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:648: warning: Function parameter or member 'priv' not described in 'iwl_restore_stations' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:648: warning: Function parameter or member 'ctx' not described in 'iwl_restore_stations' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:790: warning: Function parameter or member 'priv' not described in 'is_lq_table_valid' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:790: warning: Function parameter or member 'ctx' not described in 'is_lq_table_valid' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:790: warning: Function parameter or member 'lq' not described in 'is_lq_table_valid' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:822: warning: Function parameter or member 'priv' not described in 'iwl_send_lq_cmd' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:822: warning: Function parameter or member 'ctx' not described in 'iwl_send_lq_cmd' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:822: warning: Function parameter or member 'lq' not described in 'iwl_send_lq_cmd' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:822: warning: Function parameter or member 'flags' not described in 'iwl_send_lq_cmd' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1270: warning: Function parameter or member 'priv' not described in 'iwlagn_alloc_bcast_station' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1270: warning: Function parameter or member 'ctx' not described in 'iwlagn_alloc_bcast_station' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1309: warning: Function parameter or member 'priv' not described in 'iwl_update_bcast_station' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1309: warning: Function parameter or member 'ctx' not described in 'iwl_update_bcast_station' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1348: warning: Function parameter or member 'priv' not described in 'iwl_sta_tx_modify_enable_tid' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1348: warning: Function parameter or member 'sta_id' not described in 'iwl_sta_tx_modify_enable_tid' drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1348: warning: Function parameter or member 'tid' not described in 'iwl_sta_tx_modify_enable_tid' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: calib: Demote seemingly unintentional kerneldoc headerLee Jones1-1/+1
This is the only use of kerneldoc in the sourcefile and no descriptions are provided. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/dvm/calib.c:770: warning: Function parameter or member 'priv' not described in 'iwl_find_disconn_antenna' drivers/net/wireless/intel/iwlwifi/dvm/calib.c:770: warning: Function parameter or member 'average_sig' not described in 'iwl_find_disconn_antenna' drivers/net/wireless/intel/iwlwifi/dvm/calib.c:770: warning: Function parameter or member 'data' not described in 'iwl_find_disconn_antenna' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: dvm: lib: Demote non-compliant kernel-doc headersLee Jones1-2/+2
Neither of these headers attempt to document any function parameters. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/dvm/lib.c:121: warning: Function parameter or member 'priv' not described in 'iwlagn_txfifo_flush' drivers/net/wireless/intel/iwlwifi/dvm/lib.c:121: warning: Function parameter or member 'scd_q_msk' not described in 'iwlagn_txfifo_flush' drivers/net/wireless/intel/iwlwifi/dvm/lib.c:779: warning: Function parameter or member 'priv' not described in 'iwlagn_set_rxon_chain' drivers/net/wireless/intel/iwlwifi/dvm/lib.c:779: warning: Function parameter or member 'ctx' not described in 'iwlagn_set_rxon_chain' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: dvm: tx: Demote non-compliant kernel-doc headersLee Jones1-2/+2
None of these headers attempt to document any function parameters. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/dvm/tx.c:811: warning: Function parameter or member 'priv' not described in 'iwlagn_hwrate_to_tx_control' drivers/net/wireless/intel/iwlwifi/dvm/tx.c:811: warning: Function parameter or member 'rate_n_flags' not described in 'iwlagn_hwrate_to_tx_control' drivers/net/wireless/intel/iwlwifi/dvm/tx.c:811: warning: Function parameter or member 'info' not described in 'iwlagn_hwrate_to_tx_control' drivers/net/wireless/intel/iwlwifi/dvm/tx.c:1267: warning: Function parameter or member 'priv' not described in 'iwlagn_rx_reply_compressed_ba' drivers/net/wireless/intel/iwlwifi/dvm/tx.c:1267: warning: Function parameter or member 'rxb' not described in 'iwlagn_rx_reply_compressed_ba' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: rs: Demote non-compliant kernel-doc headersLee Jones1-6/+6
None of these headers attempt to document any function parameters. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/dvm/rs.c:165: warning: cannot understand function prototype: 'const u16 expected_tpt_legacy[IWL_RATE_COUNT] = ' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:329: warning: Function parameter or member 'priv' not described in 'rs_program_fix_rate' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:329: warning: Function parameter or member 'lq_sta' not described in 'rs_program_fix_rate' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:452: warning: Function parameter or member 'tbl' not described in 'rs_collect_tx_data' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:452: warning: Function parameter or member 'scale_index' not described in 'rs_collect_tx_data' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:452: warning: Function parameter or member 'attempts' not described in 'rs_collect_tx_data' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:452: warning: Function parameter or member 'successes' not described in 'rs_collect_tx_data' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:681: warning: Function parameter or member 'sta' not described in 'rs_use_green' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:702: warning: Function parameter or member 'lq_sta' not described in 'rs_get_supported_rates' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:702: warning: Function parameter or member 'hdr' not described in 'rs_get_supported_rates' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:702: warning: Function parameter or member 'rate_type' not described in 'rs_get_supported_rates' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:2628: warning: duplicate section name 'NOTE' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:2632: warning: Function parameter or member 'priv' not described in 'rs_initialize_lq' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:2632: warning: Function parameter or member 'sta' not described in 'rs_initialize_lq' drivers/net/wireless/intel/iwlwifi/dvm/rs.c:2632: warning: Function parameter or member 'lq_sta' not described in 'rs_initialize_lq' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08iwlwifi: dvm: Demote non-compliant kernel-doc headersLee Jones1-6/+5
None of these headers attempt to document any function parameters. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlwifi/dvm/main.c:388: warning: Function parameter or member 't' not described in 'iwl_bg_statistics_periodic' drivers/net/wireless/intel/iwlwifi/dvm/main.c:545: warning: Function parameter or member 't' not described in 'iwl_bg_ucode_trace' drivers/net/wireless/intel/iwlwifi/dvm/main.c:771: warning: Function parameter or member 'priv' not described in 'iwl_alive_start' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'priv' not described in 'iwl_print_event_log' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'start_idx' not described in 'iwl_print_event_log' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'num_events' not described in 'iwl_print_event_log' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'mode' not described in 'iwl_print_event_log' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'pos' not described in 'iwl_print_event_log' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'buf' not described in 'iwl_print_event_log' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1692: warning: Function parameter or member 'bufsz' not described in 'iwl_print_event_log' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'priv' not described in 'iwl_print_last_event_logs' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'capacity' not described in 'iwl_print_last_event_logs' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'num_wraps' not described in 'iwl_print_last_event_logs' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'next_entry' not described in 'iwl_print_last_event_logs' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'size' not described in 'iwl_print_last_event_logs' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'mode' not described in 'iwl_print_last_event_logs' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'pos' not described in 'iwl_print_last_event_logs' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'buf' not described in 'iwl_print_last_event_logs' drivers/net/wireless/intel/iwlwifi/dvm/main.c:1772: warning: Function parameter or member 'bufsz' not described in 'iwl_print_last_event_logs' Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-08net: wireless: nl80211: fix out-of-bounds access in nl80211_del_key()Anant Thazhemadam1-0/+3
In nl80211_parse_key(), key.idx is first initialized as -1. If this value of key.idx remains unmodified and gets returned, and nl80211_key_allowed() also returns 0, then rdev_del_key() gets called with key.idx = -1. This causes an out-of-bounds array access. Handle this issue by checking if the value of key.idx after nl80211_parse_key() is called and return -EINVAL if key.idx < 0. Cc: [email protected] Reported-by: [email protected] Tested-by: [email protected] Signed-off-by: Anant Thazhemadam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-10-08mac80211: copy configured beacon tx rate to driverRajkumar Manoharan2-0/+6
The user is allowed to change beacon tx rate (HT/VHT/HE) from hostapd. This information needs to be passed to the driver when the rate control is offloaded to the firmware. The driver capability of allowing beacon rate is already validated in cfg80211, so simply passing the rate information to the driver is enough. Signed-off-by: Rajkumar Manoharan <[email protected]> Link: https://lore.kernel.org/r/[email protected] [adjust commit message slightly] Signed-off-by: Johannes Berg <[email protected]>
2020-10-08bpf: Fix scalar32_min_max_or bounds trackingDaniel Borkmann1-4/+4
Simon reported an issue with the current scalar32_min_max_or() implementation. That is, compared to the other 32 bit subreg tracking functions, the code in scalar32_min_max_or() stands out that it's using the 64 bit registers instead of 32 bit ones. This leads to bounds tracking issues, for example: [...] 8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 8: (79) r1 = *(u64 *)(r0 +0) R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 9: (b7) r0 = 1 10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 10: (18) r2 = 0x600000002 12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 12: (ad) if r1 < r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: (95) exit 14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 14: (25) if r1 > 0x0 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: (95) exit 16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 16: (47) r1 |= 0 17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x1; 0x700000000),s32_max_value=1,u32_max_value=1) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm [...] The bound tests on the map value force the upper unsigned bound to be 25769803777 in 64 bit (0b11000000000000000000000000000000001) and then lower one to be 1. By using OR they are truncated and thus result in the range [1,1] for the 32 bit reg tracker. This is incorrect given the only thing we know is that the value must be positive and thus 2147483647 (0b1111111111111111111111111111111) at max for the subregs. Fix it by using the {u,s}32_{min,max}_value vars instead. This also makes sense, for example, for the case where we update dst_reg->s32_{min,max}_value in the else branch we need to use the newly computed dst_reg->u32_{min,max}_value as we know that these are positive. Previously, in the else branch the 64 bit values of umin_value=1 and umax_value=32212254719 were used and latter got truncated to be 1 as upper bound there. After the fix the subreg range is now correct: [...] 8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 8: (79) r1 = *(u64 *)(r0 +0) R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 9: (b7) r0 = 1 10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 10: (18) r2 = 0x600000002 12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 12: (ad) if r1 < r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: (95) exit 14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 14: (25) if r1 > 0x0 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: (95) exit 16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 16: (47) r1 |= 0 17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm [...] Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Simon Scannell <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]>
2020-10-08docs: net: 80211: reduce docs build timeMauro Carvalho Chehab3-492/+199
the files under /80211 calls kernel-doc script 207 times, one for each single function and doc chapter. Due to that, it takes a lot of time handling it: $ touch Documentation/driver-api/80211/*rst && time make SPHINXDIRS=driver-api/80211 htmldocs ... real 0m22,928s user 0m21,644s sys 0m1,334s Reduce the build time by doing only one kernel-doc call per functions that belong to the same group. With that, there's now 50 calls to kernel-doc, which makes the build time for those docs 62% faster: $ touch Documentation/driver-api/80211/*rst && time make SPHINXDIRS=driver-api/80211 htmldocs ... real 0m8,666s user 0m8,084s sys 0m0,642s As a side effect, it should now be easier to add newer functions, as there's no need to repeat the kernel-doc pattern. Measurements made on a NUC8i7HNK machine with lots of ram and a fast SSD disk with Sphinx 3.2.1. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Link: https://lore.kernel.org/r/f0085721d85ebc3a77164b457ed948eee48b55df.1601890703.git.mchehab+huawei@kernel.org Signed-off-by: Johannes Berg <[email protected]>
2020-10-08cfg80211: only allow S1G channels on S1G bandThomas Pedersen1-1/+4
As discovered by syzbot, cfg80211 was accepting S1G channel widths on non-S1G bands. Add a check for this, and consolidate the 1MHz frequency check as it ends up being a subset of the others. Reported-by: [email protected] Fixes: 11b34737b18a ("nl80211: support setting S1G channels") Signed-off-by: Thomas Pedersen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-10-08mac80211: initialize last_rate for S1G STAsThomas Pedersen6-1/+25
last_rate is initialized to zero by sta_info_alloc(), but this indicates legacy bitrate for the last TX rate (and invalid for the last RX rate). To avoid a warning when decoding the last rate as legacy (before a data frame has been sent), initialize them as S1G MCS. Signed-off-by: Thomas Pedersen <[email protected]> Link: https://lore.kernel.org/r/[email protected] [rename to ieee80211_s1g_sta_rate_init(), seems more appropriate] Signed-off-by: Johannes Berg <[email protected]>
2020-10-08mac80211: handle lack of sband->bitrates in ratesThomas Pedersen2-1/+6
Even though a driver or mac80211 shouldn't produce a legacy bitrate if sband->bitrates doesn't exist, don't crash if that is the case either. This fixes a kernel panic if station dump is run before last_rate can be updated with a data frame when sband->bitrates is missing (eg. in S1G bands). Signed-off-by: Thomas Pedersen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-10-07can: xilinx_can: Fix incorrect variable and initialize with a default valueSrinivas Neeli1-2/+2
Some variables with incorrect type were passed to "of_property_read_u32" API, "of_property_read_u32" API was expecting an "u32 *" but the formal parameter that was passed was of type "int *". Fixed the issue by changing the variable types from "int" to "u32" and initialized with a default value. Fixed sparse warning. Addresses-Coverity: "incompatible_param" Addresses-Coverity: "UNINIT(Using uninitialized value)" Signed-off-by: Srinivas Neeli <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/0651544d22f3c25893ca9d445b14823f0dfddfc8.1600073396.git.michal.simek@xilinx.com Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-10-07can: xilinx_can: Check return value of set_reset_modeSrinivas Neeli1-1/+5
Check return value of set_reset_mode() for error. Addresses-Coverity: "check_return" Signed-off-by: Srinivas Neeli <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/bac2c2b857986472a11db341b3f6f7a8905ad0dd.1600073396.git.michal.simek@xilinx.com Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-10-07can: xilinx_can: Limit CANFD brp to 2Srinivas Neeli1-2/+2
Bit enlarging is observed for CANFD2.0 when brp is 1, So change brp_min value to 2. Signed-off-by: Srinivas Neeli <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/bca871d7f3ca9c653d50e63c5b60028f2bdf3fb0.1600073396.git.michal.simek@xilinx.com Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-10-07can: flexcan: remove ack_grp and ack_bit handling from driverMarc Kleine-Budde1-9/+4
Since commit: 048e3a34a2e7 can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment the driver polls the IP core's internal bit MCR[LPM_ACK] as stop mode acknowledge and not the acknowledgment on chip level. This means the 4th and 5th value of the property "fsl,stop-mode" isn't used anymore. This patch removes the used "ack_gpr" and "ack_bit" from the driver. Link: http://lore.kernel.org/r/[email protected] Fixes: 048e3a34a2e7 ("can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment") Cc: Joakim Zhang <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-10-07dt-bindings: can: flexcan: remove ack_grp and ack_bit from fsl,stop-modeMarc Kleine-Budde1-3/+1
Since commit: 048e3a34a2e7 can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment the driver polls the IP core's internal bit MCR[LPM_ACK] as stop mode acknowledge and not the acknowledgment on chip level. This means the 4th and 5th value of the property "fsl,stop-mode" isn't used anymore. It will be removed from the driver in the next patch, so remove it from the binding documentation. Link: http://lore.kernel.org/r/[email protected] Fixes: 048e3a34a2e7 ("can: flexcan: poll MCR_LPM_ACK instead of GPR ACK for stop mode acknowledgment") Cc: devicetree <[email protected]> Cc: Joakim Zhang <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-10-07dt-bindings: can: flexcan: list supported processorsMichael Walle1-0/+6
The compatible is a pattern match. Explicitly list all possible values. Also mention that the ls1028ar1 must be followed by lx2160ar1. Signed-off-by: Michael Walle <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-10-07dt-bindings: can: rcar_can: Document r8a774e1 supportLad Prabhakar1-2/+3
Document SoC specific bindings for RZ/G2H (R8A774E1) SoC. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Marian-Cristian Rotariu <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-10-07dt-bindings: can: rcar_canfd: Document r8a774e1 supportLad Prabhakar1-2/+3
Document the support for rcar_canfd on R8A774E1 SoC devices. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Marian-Cristian Rotariu <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-10-07dt-bindings: can: rcar_can: Add r8a7742 supportLad Prabhakar1-1/+2
Document RZ/G1H (r8a7742) SoC specific bindings. The R8A7742 CAN module is identical to R-Car Gen2 family. No driver change is needed due to the fallback compatible value "renesas,rcar-gen2-can". Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Chris Paterson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-10-07can: add ISO 15765-2:2016 transport protocolOliver Hartkopp5-0/+1609
CAN Transport Protocols offer support for segmented Point-to-Point communication between CAN nodes via two defined CAN Identifiers. As CAN frames can only transport a small amount of data bytes (max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this segmentation is needed to transport longer PDUs as needed e.g. for vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic. This protocol driver implements data transfers according to ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types. Signed-off-by: Oliver Hartkopp <[email protected]> Link: https://lore.kernel.org/r/[email protected] [mkl: Removed "WITH Linux-syscall-note" from isotp.c. Fixed indention, a checkpatch warning and typos. Replaced __u{8,32} by u{8,32}. Removed always false (optlen < 0) check in isotp_setsockopt().] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-10-07can: dev: add a helper function to calculate the duration of one bitVincent Mailhol2-7/+21
Rename macro CAN_CALC_SYNC_SEG to CAN_SYNC_SEG and make it available through include/linux/can/dev.h Add an helper function can_bit_time() which returns the duration (in time quanta) of one CAN bit. Rationale for this patch: the sync segment and the bit time are two concepts which are defined in the CAN ISO standard. Device drivers for CAN might need those. Please refer to ISO 11898-1:2015, section 11.3.1.1 "Bit time" for additional information. Signed-off-by: Vincent Mailhol <[email protected]> Link: https://lore.kernel.org/r/[email protected] [mkl: Let can_bit_time() return an unsinged int, make argument const] Signed-off-by: Marc Kleine-Budde <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.