aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-07-14net: phy: bcm-phy-lib: Implement BroadR-Reach link modesKamil Horák (2N)3-28/+494
Implement single-pair BroadR-Reach modes on bcm5481x PHY by Broadcom. Create set of functions alternative to IEEE 802.3 to handle configuration of these modes on compatible Broadcom PHYs. There is only subset of capabilities supported because of limited collection of hardware available for the development. For BroadR-Reach capable PHYs, the LRE (Long Reach Ethernet) alternative register set is handled. Only bcm54811 PHY is verified, for bcm54810, there is some support possible but untested. There is no auto-negotiation of the link parameters (called LDS in the Broadcom terminology, Long-Distance Signaling) for bcm54811. It should be possible to enable LDS for bcm54810. Signed-off-by: Kamil Horák (2N) <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14dt-bindings: ethernet-phy: add optional brr-mode flagKamil Horák (2N)1-0/+8
There is a group of PHY chips supporting BroadR-Reach link modes in a manner allowing for more or less identical register usage as standard Clause 22 PHY. These chips support standard Ethernet link modes as well, however, the circuitry is mutually exclusive and cannot be auto-detected. The link modes in question are 100Base-T1 as defined in IEEE802.3bw, based on Broadcom's 1BR-100 link mode, and newly defined 10Base-T1BRR (1BR-10 in Broadcom documents). Add optional brr-mode flag to switch the PHY to BroadR-Reach mode. Signed-off-by: Kamil Horák (2N) <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14net: phy: bcm54811: Add LRE registers definitionsKamil Horák (2N)1-0/+88
Add the definitions of LRE registers for Broadcom BCM5481x PHY Signed-off-by: Kamil Horák (2N) <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14net: phy: bcm54811: New link mode for BroadR-ReachKamil Horák (2N)3-1/+6
Introduce a new link mode necessary for 10 MBit single-pair connection in BroadR-Reach mode on bcm5481x PHY by Broadcom. This new link mode, 10baseT1BRR, is known as 1BR10 in the Broadcom terminology. Another link mode to be used is 1BR100 and it is already present as 100baseT1, because Broadcom's 1BR100 became 100baseT1 (IEEE 802.3bw). Signed-off-by: Kamil Horák (2N) <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14Merge branch 'virtio-net-support-af_xdp-zero-copy'Jakub Kicinski1-94/+676
Xuan Zhuo says: ==================== virtio-net: support AF_XDP zero copy v5: http://lore.kernel.org/all/[email protected] XDP socket(AF_XDP) is an excellent bypass kernel network framework. The zero copy feature of xsk (XDP socket) needs to be supported by the driver. The performance of zero copy is very good. mlx5 and intel ixgbe already support this feature, This patch set allows virtio-net to support xsk's zerocopy xmit feature. At present, we have completed some preparation: 1. vq-reset (virtio spec and kernel code) 2. virtio-core premapped dma 3. virtio-net xdp refactor So it is time for Virtio-Net to complete the support for the XDP Socket Zerocopy. Virtio-net can not increase the queue num at will, so xsk shares the queue with kernel. On the other hand, Virtio-Net does not support generate interrupt from driver manually, so when we wakeup tx xmit, we used some tips. If the CPU run by TX NAPI last time is other CPUs, use IPI to wake up NAPI on the remote CPU. If it is also the local CPU, then we wake up napi directly. This patch set includes some refactor to the virtio-net to let that to support AF_XDP. Because there are too many commits, the work of virtio net supporting af-xdp is split to rx part and tx part. This patch set is for rx part. So the flag NETDEV_XDP_ACT_XSK_ZEROCOPY is not added, if someone want to test for af-xdp rx, the flag needs to be adding locally. ENV: Qemu with vhost-user(polling mode). Host CPU: Intel(R) Xeon(R) Platinum 8163 CPU @ 2.50GHz testpmd> show port stats all ######################## NIC statistics for port 0 ######################## RX-packets: 19531092064 RX-missed: 0 RX-bytes: 1093741155584 RX-errors: 0 RX-nombuf: 0 TX-packets: 5959955552 TX-errors: 0 TX-bytes: 371030645664 Throughput (since last show) Rx-pps: 8861574 Rx-bps: 3969985208 Tx-pps: 8861493 Tx-bps: 3969962736 ############################################################################ testpmd> show port stats all ######################## NIC statistics for port 0 ######################## RX-packets: 68152727 RX-missed: 0 RX-bytes: 3816552712 RX-errors: 0 RX-nombuf: 0 TX-packets: 68114967 TX-errors: 33216 TX-bytes: 3814438152 Throughput (since last show) Rx-pps: 6333196 Rx-bps: 2837272088 Tx-pps: 6333227 Tx-bps: 2837285936 ############################################################################ But AF_XDP consumes more CPU for tx and rx napi(100% and 86%). ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14virtio_net: xsk: rx: support recv merge modeXuan Zhuo1-0/+144
Support AF-XDP for merge mode. Signed-off-by: Xuan Zhuo <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14virtio_net: xsk: rx: support recv small modeXuan Zhuo1-8/+168
In the process: 1. We may need to copy data to create skb for XDP_PASS. 2. We may need to call xsk_buff_free() to release the buffer. 3. The handle for xdp_buff is difference from the buffer. If we pushed this logic into existing receive handle(merge and small), we would have to maintain code scattered inside merge and small (and big). So I think it is a good choice for us to put the xsk code into an independent function. Signed-off-by: Xuan Zhuo <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14virtio_net: xsk: rx: support fill with xsk bufferXuan Zhuo1-4/+66
Implement the logic of filling rq with XSK buffers. Signed-off-by: Xuan Zhuo <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14virtio_net: xsk: support wakeupXuan Zhuo1-0/+24
xsk wakeup is used to trigger the logic for xsk xmit by xsk framework or user. Virtio-net does not support to actively generate an interruption, so it tries to trigger tx NAPI on the local cpu. Signed-off-by: Xuan Zhuo <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14virtio_net: xsk: bind/unbind xsk for rxXuan Zhuo1-0/+134
This patch implement the logic of bind/unbind xsk pool to rq. Signed-off-by: Xuan Zhuo <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14virtio_net: separate receive_mergeableXuan Zhuo1-30/+47
This commit separates the function receive_mergeable(), put the logic of appending frag to the skb as an independent function. The subsequent commit will reuse it. Signed-off-by: Xuan Zhuo <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14virtio_net: separate receive_bufXuan Zhuo1-27/+35
This commit separates the function receive_buf(), then we wrap the logic of handling the skb to an independent function virtnet_receive_done(). The subsequent commit will reuse it. Signed-off-by: Xuan Zhuo <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14virtio_net: separate virtnet_tx_resize()Xuan Zhuo1-6/+29
This patch separates two sub-functions from virtnet_tx_resize(): * virtnet_tx_pause * virtnet_tx_resume Then the subsequent virtnet_tx_reset() can share these two functions. Signed-off-by: Xuan Zhuo <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14virtio_net: separate virtnet_rx_resize()Xuan Zhuo1-8/+21
This patch separates two sub-functions from virtnet_rx_resize(): * virtnet_rx_pause * virtnet_rx_resume Then the subsequent reset rx for xsk can share these two functions. Signed-off-by: Xuan Zhuo <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14virtio_net: replace VIRTIO_XDP_HEADROOM by XDP_PACKET_HEADROOMXuan Zhuo1-12/+9
virtio net has VIRTIO_XDP_HEADROOM that is equal to XDP_PACKET_HEADROOM to calculate the headroom for xdp. But here we should use the macro XDP_PACKET_HEADROOM from bpf.h to calculate the headroom for xdp. So here we remove the VIRTIO_XDP_HEADROOM, and use the XDP_PACKET_HEADROOM to replace it. Signed-off-by: Xuan Zhuo <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14Merge branch ↵Jakub Kicinski4-39/+69
'eliminate-config_nr_cpus-dependency-in-dpaa-eth-and-enable-compile_test-in-fsl_qbman' Vladimir Oltean says: ==================== Eliminate CONFIG_NR_CPUS dependency in dpaa-eth and enable COMPILE_TEST in fsl_qbman Breno's previous attempt at enabling COMPILE_TEST for the fsl_qbman driver (now included here as patch 5/5) triggered compilation warnings for large CONFIG_NR_CPUS values: https://lore.kernel.org/all/[email protected]/ Patch 1/5 switches two NR_CPUS arrays in the dpaa-eth driver to dynamic allocation to avoid that warning. There is more NR_CPUS usage in the fsl-qbman driver, but that looks relatively harmless and I couldn't find a good reason to change it. I noticed, while testing, that the driver doesn't actually work properly with high CONFIG_NR_CPUS values, and patch 2/5 addresses that. During code analysis, I have identified two places which treat conditions that can never happen. Patches 3/5 and 4/5 simplify the probing code - dpaa_fq_setup() - just a little bit. Finally we have at 5/5 the patch that triggered all of this. There is an okay from Herbert to take it via netdev, despite it being on soc/qbman: https://lore.kernel.org/all/Zns%[email protected]/ Link to v1: https://lore.kernel.org/netdev/[email protected]/ ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14soc: fsl: qbman: FSL_DPAA depends on COMPILE_TESTBreno Leitao1-1/+1
As most of the drivers that depend on ARCH_LAYERSCAPE, make FSL_DPAA depend on COMPILE_TEST for compilation and testing. # grep -r depends.\*ARCH_LAYERSCAPE.\*COMPILE_TEST | wc -l 29 Signed-off-by: Breno Leitao <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Acked-by: Madalin Bucur <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14net: dpaa: no need to make sure all CPUs receive a corresponding Tx queueVladimir Oltean1-11/+0
dpaa_fq_setup() iterates through the &priv->dpaa_fq_list elements allocated by dpaa_alloc_all_fqs(). This includes a call to: if (!dpaa_fq_alloc(dev, 0, dpaa_max_num_txqs(), list, FQ_TYPE_TX)) goto fq_alloc_failed; which gives us dpaa_max_num_txqs() elements of FQ_TYPE_TX type. The code block which we are deleting runs after an earlier iteration through &priv->dpaa_fq_list. So at the end of this iteration (for which there is no early break), egress_cnt will be unconditionally equal to dpaa_max_num_txqs(). In other words, dpaa_alloc_all_fqs() has already allocated TX queues for all possible CPUs and the maximal number of traffic classes, and we've already iterated once through them all. The while() condition is dead code, remove it. Signed-off-by: Vladimir Oltean <[email protected]> Acked-by: Madalin Bucur <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14net: dpaa: stop ignoring TX queues past the number of CPUsVladimir Oltean1-5/+1
dpaa_fq_setup() iterates through the queues allocated by dpaa_alloc_all_fqs() and saved in &priv->dpaa_fq_list. The allocation for FQ_TYPE_TX looks as follows: if (!dpaa_fq_alloc(dev, 0, dpaa_max_num_txqs(), list, FQ_TYPE_TX)) goto fq_alloc_failed; Thus, iterating again through FQ_TYPE_TX queues in dpaa_fq_setup() and counting them will never yield an egress_cnt larger than the allocated size, dpaa_max_num_txqs(). The comparison serves no purpose since it is always true; remove it. Signed-off-by: Vladimir Oltean <[email protected]> Acked-by: Madalin Bucur <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14net: dpaa: eliminate NR_CPUS dependency in egress_fqs[] and conf_fqs[]Vladimir Oltean2-20/+47
The driver uses the DPAA_TC_TXQ_NUM and DPAA_ETH_TXQ_NUM macros for TX queue handling, and they depend on CONFIG_NR_CPUS. In generic .config files, these can go to very large (8096 CPUs) values for the systems that DPAA1 is integrated in (1-24 CPUs). We allocate a lot of resources that will never be used. Those are: - system memory - QMan FQIDs as managed by qman_alloc_fqid_range(). This is especially painful since currently, when booting with CONFIG_NR_CPUS=8096, a LS1046A-RDB system will only manage to probe 3 of its 6 interfaces. The rest will run out of FQD ("/reserved-memory/qman-fqd" in the device tree) and fail at the qman_create_fq() stage of the probing process. - netdev queues as alloc_etherdev_mq() argument. The high queue indices are simply hidden from the network stack after the call to netif_set_real_num_tx_queues(). With just a tiny bit more effort, we can replace the NR_CPUS compile-time constant with the num_possible_cpus() run-time constant, and dynamically allocate the egress_fqs[] and conf_fqs[] arrays. Even on a system with a high CONFIG_NR_CPUS, num_possible_cpus() will remain equal to the number of available cores on the SoC. The replacement is as follows: - DPAA_TC_TXQ_NUM -> dpaa_num_txqs_per_tc() - DPAA_ETH_TXQ_NUM -> dpaa_max_num_txqs() Signed-off-by: Vladimir Oltean <[email protected]> Acked-by: Madalin Bucur <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14net: dpaa: avoid on-stack arrays of NR_CPUS elementsVladimir Oltean2-6/+24
The dpaa-eth driver is written for PowerPC and Arm SoCs which have 1-24 CPUs. It depends on CONFIG_NR_CPUS having a reasonably small value in Kconfig. Otherwise, there are 2 functions which allocate on-stack arrays of NR_CPUS elements, and these can quickly explode in size, leading to warnings such as: drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:3280:12: warning: stack frame size (16664) exceeds limit (2048) in 'dpaa_eth_probe' [-Wframe-larger-than] The problem is twofold: - Reducing the array size to the boot-time num_possible_cpus() (rather than the compile-time NR_CPUS) creates a variable-length array, which should be avoided in the Linux kernel. - Using NR_CPUS as an array size makes the driver blow up in stack consumption with generic, as opposed to hand-crafted, .config files. A simple solution is to use dynamic allocation for num_possible_cpus() elements (aka a small number determined at runtime). Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Breno Leitao <[email protected]> Acked-by: Madalin Bucur <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14Merge tag 'ipsec-next-2024-07-13' of ↵Jakub Kicinski16-10/+393
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2024-07-13 1) Support sending NAT keepalives in ESP in UDP states. Userspace IKE daemon had to do this before, but the kernel can better keep track of it. From Eyal Birger. 2) Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP data paths. Currently, IPsec crypto offload is enabled for GRO code path only. This patchset support UDP encapsulation for the non GRO path. From Mike Yu. * tag 'ipsec-next-2024-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: Support crypto offload for outbound IPv4 UDP-encapsulated ESP packet xfrm: Support crypto offload for inbound IPv4 UDP-encapsulated ESP packet xfrm: Allow UDP encapsulation in crypto offload control path xfrm: Support crypto offload for inbound IPv6 ESP packets not in GRO path xfrm: support sending NAT keepalives in ESP in UDP states ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14Merge branch 'introduce-en7581-ethernet-support'Jakub Kicinski5-1/+2892
Lorenzo Bianconi says: ==================== Introduce EN7581 ethernet support Add airoha_eth driver in order to introduce ethernet support for Airoha EN7581 SoC available on EN7581 development board. EN7581 mac controller is mainly composed by Frame Engine (FE) and QoS-DMA (QDMA) modules. FE is used for traffic offloading (just basic functionalities are supported now) while QDMA is used for DMA operation and QOS functionalities between mac layer and the dsa switch (hw QoS is not available yet and it will be added in the future). Currently only hw lan features are available, hw wan will be added with subsequent patches. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14net: airoha: Introduce ethernet support for EN7581 SoCLorenzo Bianconi4-1/+2749
Add airoha_eth driver in order to introduce ethernet support for Airoha EN7581 SoC available on EN7581 development board (en7581-evb). EN7581 mac controller is mainly composed by the Frame Engine (PSE+PPE) and QoS-DMA (QDMA) modules. FE is used for traffic offloading (just basic functionalities are currently supported) while QDMA is used for DMA operations and QOS functionalities between the mac layer and the external modules conncted to the FE GDM ports (e.g MT7530 DSA switch or external phys). A general overview of airoha_eth architecture is reported below: ┌───────┐ ┌───────┐ │ QDMA2 │ │ QDMA1 │ └───┬───┘ └───┬───┘ │ │ ┌───────▼─────────────────────────────────────────────▼────────┐ │ │ │ P5 P0 │ │ │ │ │ │ │ ┌──────┐ │ P3 ├────► GDM3 │ │ │ └──────┘ │ │ │ │ ┌─────┐ │ │ │ PPE ◄────┤ P4 PSE │ └─────┘ │ │ │ │ │ │ │ │ ┌──────┐ │ P9 ├────► GDM4 │ │ │ └──────┘ │ │ │ │ │ │ │ P2 P1 │ └─────────┬───────────────────────────────────────────┬────────┘ │ │ ┌───▼──┐ ┌──▼───┐ │ GDM2 │ │ GDM1 │ └──────┘ └──┬───┘ │ ┌────▼─────┐ │ MT7530 │ └──────────┘ Currently only hw LAN features (QDMA1+GDM1) are available while hw WAN (QDMA2+GDM{2,3,4}) ones will be added with subsequent patches introducing traffic offloading support. Tested-by: Benjamin Larsson <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Link: https://patch.msgid.link/274945d2391c195098ab180a46d0617b18b9e42c.1720818878.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14dt-bindings: net: airoha: Add EN7581 ethernet controllerLorenzo Bianconi1-0/+143
Introduce device-tree binding documentation for Airoha EN7581 ethernet mac controller. Reviewed-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Link: https://patch.msgid.link/7dfecf8aa4e6519562a94455b95c49e1b3c858a0.1720818878.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14Merge branch '100GbE' of ↵Jakub Kicinski6-496/+272
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: Switch API optimizations Marcin Szycik says: Optimize the process of creating a recipe in the switch block by removing duplicate switch ID words and changing how result indexes are fitted into recipes. In many cases this can decrease the number of recipes required to add a certain set of rules, potentially allowing a more varied set of rules to be created. Total rule count will also increase, since less words will be left unused/wasted. There are only 64 rules available in total, so every one counts. After this modification, many fields and some structs became unused or were simplified, resulting in overall simpler implementation. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Add tracepoint for adding and removing switch rules ice: Remove unused members from switch API ice: Optimize switch recipe creation ice: remove unused recipe bookkeeping data ice: Simplify bitmap setting in adding recipe ice: Remove reading all recipes before adding a new one ice: Remove unused struct ice_prot_lkup_ext members ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13Merge branch '40GbE' of ↵Jakub Kicinski24-50/+167
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-07-11 (net/intel) This series contains updates to most Intel network drivers. Tony removes MODULE_AUTHOR from drivers containing the entry. Simon Horman corrects a kdoc entry for i40e. Pawel adds implementation for devlink param "local_forwarding" on ice. Michal removes unneeded call, and code, for eswitch rebuild for ice. Sasha removed a no longer used field from igc. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Remove the internal 'eee_advert' field ice: remove eswitch rebuild ice: Add support for devlink local_forwarding param i40e: correct i40e_addr_to_hkey() name in kdoc net: intel: Remove MODULE_AUTHORs ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13sfc: falcon: Make I2C terminology more inclusiveEaswar Hariharan1-1/+1
I2C v7, SMBus 3.2, and I3C 1.1.1 specifications have replaced "master/slave" with more appropriate terms. Inspired by Wolfram's series to fix drivers/i2c/, fix the terminology for users of I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists in the specification. Reviewed-by: Martin Habets <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Easwar Hariharan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net: phy: dp83td510: add cable testing supportOleksij Rempel1-0/+264
This patch implements the TDR test procedure as described in "Application Note DP83TD510E Cable Diagnostics Toolkit revC", section 3.2. The procedure was tested with "draka 08 signalkabel 2x0.8mm". The reported cable length was 5 meters more for each 20 meters of actual cable length. For instance, a 20-meter cable showed as 25 meters, and a 40-meter cable showed as 50 meters. Since other parts of the diagnostics provided by this PHY (e.g., Active Link Cable Diagnostics) require accurate cable characterization to provide proper results, this tuning can be implemented in a separate patch/interface. Signed-off-by: Oleksij Rempel <[email protected]> changes v2: - add comments - change post silence time to 1000ms Reviewed-by: Andrew Lunn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net: dpaa: Fix compilation WarningBreno Leitao1-2/+0
Remove variables that are defined and incremented but never read. This issue appeared in network tests[1] as: drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c:38:6: warning: variable 'i' set but not used [-Wunused-but-set-variable] 38 | int i = 0; | ^ Link: https://netdev.bots.linux.dev/static/nipa/870263/13729811/build_clang/stderr [1] Signed-off-by: Breno Leitao <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13eth: mlx5: expose NETIF_F_NTUPLE when ARFS is compiled outJakub Kicinski5-12/+24
ARFS depends on NTUPLE filters, but the inverse is not true. Drivers which don't support ARFS commonly still support NTUPLE filtering. mlx5 has a Kconfig option to disable ARFS (MLX5_EN_ARFS) and does not advertise NTUPLE filters as a feature at all when ARFS is compiled out. That's not correct, ntuple filters indeed still work just fine (as long as MLX5_EN_RXNFC is enabled). This is needed to make the RSS test not skip all RSS context related testing. Acked-by: Saeed Mahameed <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13selftests: mptcp: lib: fix shellcheck errorsMatthieu Baerts (NGI0)1-2/+2
It looks like we missed these two errors recently: - SC2068: Double quote array expansions to avoid re-splitting elements. - SC2145: Argument mixes string and array. Use * or separate argument. Two simple fixes, it is not supposed to change the behaviour as the variable names should not have any spaces in their names. Still, better to fix them to easily spot new issues. Fixes: f265d3119a29 ("selftests: mptcp: lib: use setup/cleanup_ns helpers") Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/20240712-upstream-net-next-20240712-selftests-mptcp-fix-shellcheck-v1-1-1cb7180db40a@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13Merge branch 'mlx5-misc-2023-07-08-sf-max-eq'Jakub Kicinski6-12/+41
Saeed Mahameed says: ==================== mlx5 misc 2023-07-08 (sf max eq) Link: https://patchwork.kernel.org/project/netdevbpf/patch/[email protected]/ ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net/mlx5: Use set number of max EQsDaniel Jurgens2-10/+9
If a maximum number of EQs has been set for an SF, use that amount. Signed-off-by: Daniel Jurgens <[email protected]> Reviewed-by: William Tu <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net/mlx5: Set default max eqs for SFsDaniel Jurgens3-1/+26
If the user hasn't configured max_io_eqs set a low default. The SF driver shouldn't try to create more than this, but FW will enforce this limit. Signed-off-by: Daniel Jurgens <[email protected]> Reviewed-by: William Tu <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net/mlx5: Set sf_eq_usage for SF max EQsDaniel Jurgens1-0/+3
When setting max_io_eqs for an SF function also set the sf_eq_usage_cap. This is to indicate to the SF driver from the PF that the user has set the max io eqs via devlink. So the SF driver can later query the proper max eq value from the new cap. Signed-off-by: Daniel Jurgens <[email protected]> Reviewed-by: William Tu <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net/mlx5: IFC updates for SF max IO EQsDaniel Jurgens1-1/+3
Expose a new cap sf_eq_usage. The vhca_resource_manager can write this cap, indicating the SF driver should use max_num_eqs_24b to determine how many EQs to use. Will be used in the next patch, to indicate to the SF driver from the PF that the user has set the max io eqs via devlink. So the SF driver can later query the proper max eq value from the new cap. devlink port function set pci/0000:08:00.0/32768 max_io_eqs 32 Signed-off-by: Daniel Jurgens <[email protected]> Reviewed-by: William Tu <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net: mvpp2: Improve data types and use min()Thorsten Blum1-6/+6
Change the data type of the variable freq in mvpp2_rx_time_coal_set() and mvpp2_tx_time_coal_set() to u32 because port->priv->tclk also has the data type u32. Change the data type of the function parameter clk_hz in mvpp2_usec_to_cycles() and mvpp2_cycles_to_usec() to u32 accordingly and remove the following Coccinelle/coccicheck warning reported by do_div.cocci: WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead Use min() to simplify the code and improve its readability. Compile-tested only. Signed-off-by: Thorsten Blum <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net: ethtool: Monotonically increase the message sequence numberDanielle Ratson1-1/+1
Currently, during the module firmware flashing process, unicast notifications are sent from the kernel using the same sequence number, making it impossible for user space to track missed notifications. Monotonically increase the message sequence number, so the order of notifications could be tracked effectively. Signed-off-by: Danielle Ratson <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13Merge branch 'tcp-make-simultaneous-connect-rfc-compliant'Jakub Kicinski2-18/+9
Kuniyuki Iwashima says: ==================== tcp: Make simultaneous connect() RFC-compliant. Patch 1 fixes an issue that BPF TCP option parser is triggered for ACK instead of SYN+ACK in the case of simultaneous connect(). Patch 2 removes an wrong assumption in tcp_ao/self-connnect tests. v2: https://lore.kernel.org/netdev/[email protected]/ v1: https://lore.kernel.org/netdev/[email protected]/ ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13selftests: tcp: Remove broken SNMP assumptions for TCP AO self-connect tests.Kuniyuki Iwashima1-18/+0
tcp_ao/self-connect.c checked the following SNMP stats before/after connect() to confirm that the test exercises the simultaneous connect() path. * TCPChallengeACK * TCPSYNChallenge But the stats should not be counted for self-connect in the first place, and the assumption is no longer true. Let's remove the check. Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Dmitry Safonov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13tcp: Don't drop SYN+ACK for simultaneous connect().Kuniyuki Iwashima1-0/+9
RFC 9293 states that in the case of simultaneous connect(), the connection gets established when SYN+ACK is received. [0] TCP Peer A TCP Peer B 1. CLOSED CLOSED 2. SYN-SENT --> <SEQ=100><CTL=SYN> ... 3. SYN-RECEIVED <-- <SEQ=300><CTL=SYN> <-- SYN-SENT 4. ... <SEQ=100><CTL=SYN> --> SYN-RECEIVED 5. SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ... 6. ESTABLISHED <-- <SEQ=300><ACK=101><CTL=SYN,ACK> <-- SYN-RECEIVED 7. ... <SEQ=100><ACK=301><CTL=SYN,ACK> --> ESTABLISHED However, since commit 0c24604b68fc ("tcp: implement RFC 5961 4.2"), such a SYN+ACK is dropped in tcp_validate_incoming() and responded with Challenge ACK. For example, the write() syscall in the following packetdrill script fails with -EAGAIN, and wrong SNMP stats get incremented. 0 socket(..., SOCK_STREAM|SOCK_NONBLOCK, IPPROTO_TCP) = 3 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0 > S 0:0(0) <mss 1460,sackOK,TS val 1000 ecr 0,nop,wscale 8> +0 < S 0:0(0) win 1000 <mss 1000> +0 > S. 0:0(0) ack 1 <mss 1460,sackOK,TS val 3308134035 ecr 0,nop,wscale 8> +0 < S. 0:0(0) ack 1 win 1000 +0 write(3, ..., 100) = 100 +0 > P. 1:101(100) ack 1 -- # packetdrill cross-synack.pkt cross-synack.pkt:13: runtime error in write call: Expected result 100 but got -1 with errno 11 (Resource temporarily unavailable) # nstat ... TcpExtTCPChallengeACK 1 0.0 TcpExtTCPSYNChallenge 1 0.0 The problem is that bpf_skops_established() is triggered by the Challenge ACK instead of SYN+ACK. This causes the bpf prog to miss the chance to check if the peer supports a TCP option that is expected to be exchanged in SYN and SYN+ACK. Let's accept a bare SYN+ACK for active-open TCP_SYN_RECV sockets to avoid such a situation. Note that tcp_ack_snd_check() in tcp_rcv_state_process() is skipped not to send an unnecessary ACK, but this could be a bit risky for net.git, so this targets for net-next. Link: https://www.rfc-editor.org/rfc/rfc9293.html#section-3.5-7 [0] Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13test/vsock: add install targetPeng Fan1-0/+13
Add install target for vsock to make Yocto easy to install the images. Signed-off-by: Peng Fan <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13MAINTAINERS: add 5 missing tcp-related filesEric Dumazet1-0/+5
Following files are part of TCP stack: - net/ipv4/inet_connection_sock.c - net/ipv4/inet_hashtables.c - net/ipv4/inet_timewait_sock.c - net/ipv6/inet6_connection_sock.c - net/ipv6/inet6_hashtables.c Signed-off-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13Merge branch 'Support IPsec crypto offload for IPv6 ESP and IPv4 ↵Steffen Klassert5-7/+32
UDP-encapsulated ESP data paths' Mike Yu says: ==================== Currently, IPsec crypto offload is enabled for GRO code path. However, there are other code paths where the XFRM stack is involved; for example, IPv6 ESP packets handled by xfrm6_esp_rcv() in ESP layer, and IPv4 UDP-encapsulated ESP packets handled by udp_rcv() in UDP layer. This patchset extends the crypto offload support to cover these two cases. This is useful for devices with traffic accounting (e.g., Android), where GRO can lead to inaccurate accounting on the underlying network. For example, VPN traffic might not be counted on the wifi network interface wlan0 if the packets are handled in GRO code path before entering the network stack for accounting. Below is the RX data path scenario the crypto offload can be applied to. +-----------+ +-------+ | HW Driver |-->| wlan0 |--------+ +-----------+ +-------+ | v +---------------+ +------+ +------>| Network Stack |-->| Apps | | +---------------+ +------+ | | | v +--------+ +------------+ | ipsec1 |<--| XFRM Stack | +--------+ +------------+ ==================== Signed-off-by: Steffen Klassert <[email protected]>
2024-07-12Merge branch '200GbE' of ↵Jakub Kicinski18-1403/+1824
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== idpf: XDP chapter I: convert Rx to libeth Alexander Lobakin says: XDP for idpf is currently 5 chapters: * convert Rx to libeth (this); * convert Tx and stats to libeth; * generic XDP and XSk code changes, libeth_xdp; * actual XDP for idpf via libeth_xdp; * XSk for idpf (^). Part I does the following: * splits &idpf_queue into 4 (RQ, SQ, FQ, CQ) and puts them on a diet; * ensures optimal cacheline placement, strictly asserts CL sizes; * moves currently unused/dead singleq mode out of line; * reuses libeth's Rx ptype definitions and helpers; * uses libeth's Rx buffer management for both header and payload; * eliminates memcpy()s and coherent DMA uses on hotpath, uses napi_build_skb() instead of in-place short skb allocation. Most idpf patches, except for the queue split, removes more lines than adds. Expect far better memory utilization and +5-8% on Rx depending on the case (+17% on skb XDP_DROP :>). * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: idpf: use libeth Rx buffer management for payload buffer idpf: convert header split mode to libeth + napi_build_skb() libeth: support different types of buffers for Rx idpf: remove legacy Page Pool Ethtool stats idpf: reuse libeth's definitions of parsed ptype structures idpf: compile singleq code only under default-n CONFIG_IDPF_SINGLEQ idpf: merge singleq and splitq &net_device_ops idpf: strictly assert cachelines of queue and queue vector structures idpf: avoid bloating &idpf_q_vector with big %NR_CPUS idpf: split &idpf_queue into 4 strictly-typed queue structures idpf: stop using macros for accessing queue descriptors libeth: add cacheline / struct layout assertion helpers page_pool: use __cacheline_group_{begin, end}_aligned() cache: add __cacheline_group_{begin, end}_aligned() (+ couple more) ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-12Merge tag 'for-netdev' of ↵Jakub Kicinski18-243/+234
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-07-12 We've added 23 non-merge commits during the last 3 day(s) which contain a total of 18 files changed, 234 insertions(+), 243 deletions(-). The main changes are: 1) Improve BPF verifier by utilizing overflow.h helpers to check for overflows, from Shung-Hsi Yu. 2) Fix NULL pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT when attr->attach_prog_fd was not specified, from Tengda Wu. 3) Fix arm64 BPF JIT when generating code for BPF trampolines with BPF_TRAMP_F_CALL_ORIG which corrupted upper address bits, from Puranjay Mohan. 4) Remove test_run callback from lwt_seg6local_prog_ops which never worked in the first place and caused syzbot reports, from Sebastian Andrzej Siewior. 5) Relax BPF verifier to accept non-zero offset on KF_TRUSTED_ARGS/ /KF_RCU-typed BPF kfuncs, from Matt Bobrowski. 6) Fix a long standing bug in libbpf with regards to handling of BPF skeleton's forward and backward compatibility, from Andrii Nakryiko. 7) Annotate btf_{seq,snprintf}_show functions with __printf, from Alan Maguire. 8) BPF selftest improvements to reuse common network helpers in sk_lookup test and dropping the open-coded inetaddr_len() and make_socket() ones, from Geliang Tang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits) selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type() bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep again bpf: use check_sub_overflow() to check for subtraction overflows bpf: use check_add_overflow() to check for addition overflows bpf: fix overflow check in adjust_jmp_off() bpf: Eliminate remaining "make W=1" warnings in kernel/bpf/btf.o bpf: annotate BTF show functions with __printf bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG selftests/bpf: Close obj in error path in xdp_adjust_tail selftests/bpf: Null checks for links in bpf_tcp_ca selftests/bpf: Use connect_fd_to_fd in sk_lookup selftests/bpf: Use start_server_addr in sk_lookup selftests/bpf: Use start_server_str in sk_lookup selftests/bpf: Close fd in error path in drop_on_reuseport selftests/bpf: Add ASSERT_OK_FD macro selftests/bpf: Add backlog for network_helper_opts selftests/bpf: fix compilation failure when CONFIG_NF_FLOW_TABLE=m bpf: Remove tst_run from lwt_seg6local_prog_ops. bpf: relax zero fixed offset constraint on KF_TRUSTED_ARGS/KF_RCU ... ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski80-277/+916
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c f7ce5eb2cb79 ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()") 20c8ad72eb7f ("eth: bnxt: use the RSS context XArray instead of the local list") Adjacent changes: net/ethtool/ioctl.c 503757c80928 ("net: ethtool: Fix RSS setting") eac9122f0c41 ("net: ethtool: record custom RSS contexts in the XArray") Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-12Merge branch 'eth-bnxt-use-the-new-rss-api'Jakub Kicinski6-194/+194
Jakub Kicinski says: ==================== eth: bnxt: use the new RSS API Convert bnxt from using the set_rxfh API to separate create/modify/remove callbacks. Two small extensions to the core APIs are necessary: - the ability to discard contexts if for some catastrophic reasons device can no longer provide them; - the ability to reserve space in the context for RSS table growth. The driver is adjusted to store indirection tables on u32 to make it easier to use core structs directly. With that out of the way the conversion is fairly straightforward. Since the opposition to discarding contexts was relatively mild and its what bnxt does already, I'm sticking to that. We may very well need to revisit that at a later time. v1: https://lore.kernel.org/all/[email protected]/ ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-12eth: bnxt: use the indir table from ethtool contextJakub Kicinski3-37/+29
Instead of allocating a separate indir table in the vnic use the one already present in the RSS context allocated by the core. This saves some LoC and also we won't have to worry about syncing the local version back to the core, once core learns how to dump contexts. Reviewed-by: Pavan Chebbi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.