Age | Commit message (Collapse) | Author | Files | Lines |
|
Linux 4.13-rc5
There's a really nasty nouveau collision, hopefully someone can take a look
once I pushed this out.
|
|
Guest i915 full ppgtt functionality was blocking by an issue, which would
lead to gpu hardware hang. Guest i915 driver may update the ppgtt table
just before this workload is going to be submitted to the hardware by
device model. This case wasn't handled well by device model before, due
to the small time window between removing old ppgtt entry and adding the
new one. Errors occur when the workload is executed by hardware during
that small time window. This patch is to remove this time window by adding
the new ppgtt entry first and then remove the old one.
Changes in v2:
- Move VGT_CAPS_FULL_PPGTT introduction to patch 2/4. (Joonas)
Changes since v2:
- Divide the whole patch set into two separate patch series, with one
patch in i915 side to check guest i915 full ppgtt capability and enable
it when this capability is supported by the device model, and the other
one in gvt side which fixs the blocking issue and enables the device
model to provide the capability to guest. And this patch focuses on gvt
side. (Joonas)
- Change the title from "reorder the shadow ppgtt update process by adding
entry first" to "Fix guest i915 full ppgtt blocking issue". (Tina)
Changes since v3:
- Rebase to the latest branch.
Changes since v4:
- Tested by Tina Zhang.
Changes since v5:
- Rebase to the latest branch.
v6:
- Update full 48bit ppgtt definition
Cc: Tina Zhang <[email protected]>
Signed-off-by: Tina Zhang <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
|
|
Enable the guest i915 full ppgtt functionality when host can provide this
capability. vgt_caps is introduced to guest i915 driver to get the vgpu
capabilities from the device model. VGT_CPAS_FULL_PPGTT is one of the
capabilities type to let guest i915 dirver know that the guest i915 full
ppgtt is supported by device model.
Notice that the minor version of pvinfo isn't bumped because of this
vgt_caps introduction, due to older guest would be broken by simply
increasing the pvinfo version. Although the pvinfo minor version doesn't
increase, the compatibility won't be blocked. The compatibility is ensured
by checking the value of caps field in pvinfo. Zero means no full ppgtt
support and BIT(2) means this feature is provided.
Changes since v1:
- Use u32 instead of uint32_t (Joonas)
- Move VGT_CAPS_FULL_PPGTT introduction to this patch and use #define
instead of enum (Joonas)
- Rewrite the vgpu full ppgtt capability checking logic. (Joonas)
- Some coding style refine. (Joonas)
Changes since v2:
- Divide the whole patch set into two separate patch series, with one
patch in i915 side to check guest i915 full ppgtt capability and enable
it when this capability is supported by the device model, and the other
one in gvt side which fixs the blocking issue and enables the device
model to provide the capability to guest. And this patch focuses on guest
i915 side. (Joonas)
- Change the title from "introduce vgt_caps to pvinfo" to
"Enable guest i915 full ppgtt functionality". (Tina)
Change since v3:
- Add some comments about pvinfo caps and version. (Joonas)
Change since v4:
- Tested by Tina Zhang.
Change since v5:
- Add limitation about supporting 32bit full ppgtt.
Change since v6:
- Change the fallback to 48bit full ppgtt if i915.ppgtt_enable=2. (Zhenyu)
Change in v9:
- Remove the fixme comment due to no plan for 32bit full ppgtt
support. (Zhenyu)
- Reorder the patch-set to fix compiling issue with git-bisect. (Zhenyu)
- Add print log when forcing guest 48bit full ppgtt. (Zhenyu)
v10:
- Update against Joonas's has_full_ppgtt and has_full_48bit_ppgtt disconnect
change. (Zhenyu)
Reviewed-by: Joonas Lahtinen <[email protected]> # in v2
Cc: Joonas Lahtinen <[email protected]>
Cc: Tina Zhang <[email protected]>
Signed-off-by: Tina Zhang <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
|
|
Configurations like virtualized environments may support only 48 bit
ppGTT without supporting 32 bit ppGTT. Support this by disconnecting
the relationship of the two feature bits.
Cc: Tina Zhang <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Zhi Wang <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Joonas Lahtinen <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
|
|
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.
Generated by: scripts/coccinelle/api/drm-get-put.cocci
v2: Tweak commit summary to distinguish it from the previous commit
covering everything but the new bo_label ioctl (by anholt).
Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Eric Anholt <[email protected]>
|
|
We don't keep a pointer to it around anywhere, so it's our job to free
it.
Cc: Stefan Wahren <[email protected]>
Link: https://github.com/anholt/linux/issues/101
Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Daniel Vetter <[email protected]>
Tested-by: Stefan Wahren <[email protected]>
|
|
With hardware resets in mind it is possible that all shared fences are
signaled, but the exlusive isn't. Fix waiting for everything in this situation.
v2: make sure we always wait for the exclusive fence
Acked-by: Sumit Semwal <[email protected]>
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Chunming Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Allows us to copy all the fences in a reservation object to another one.
v2: handle NULL src_list
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There's no reason to entirely wedge the gpu, for the minimal deadlock
bugfix we only need to unbreak/decouple the atomic commit from the gpu
reset. The simplest way to fix that is by replacing the
unconditional fence wait a the top of commit_tail by a wait which
completes either when the fences are done (normal case, or when a
reset doesn't need to touch the display state). Or when the gpu reset
needs to force-unblock all pending modeset states.
The lesser source of deadlocks is when we try to pin a new framebuffer
and run into a stall. There's a bunch of places this can happen, like
eviction, changing the caching mode, acquiring a fence on older
platforms. And we can't just break the depency loop and keep going,
the only way would be to break out and restart. But the problem with
that approach is that we must stall for the reset to complete before
we grab any locks, and with the atomic infrastructure that's a bit
tricky. The only place is the ioctl code, and we don't want to insert
code into e.g. the BUSY ioctl. Hence for that problem just create a
critical section, and if any code is in there, wedge the GPU. For the
steady-state this should never be a problem.
Note that in both cases TDR itself keeps working, so from a userspace
pov this trickery isn't observable. Users themselvs might spot a short
glitch while the rendering is catching up again, but that's still
better than pre-TDR where we've thrown away all the rendering,
including innocent batches. Also, this fixes the regression TDR
introduced of making gpu resets deadlock-prone when we do need to
touch the display.
One thing I noticed is that gpu_error.flags seems to use both our own
wait-queue in gpu_error.wait_queue, and the generic wait_on_bit
facilities. Not entirely sure why this inconsistency exists, I just
picked one style.
A possible future avenue could be to insert the gpu reset in-between
ongoing modeset changes, which would avoid the momentary glitch. But
that's a lot more work to implement in the atomic commit machinery,
and given that we only need this for pre-g4x hw, of questionable
utility just for the sake of polishing gpu reset even more on those
old boxes. It might be useful for other features though.
v2: Rebase onto 4.13 with a s/wait_queue_t/struct wait_queue_entry/.
v3: Really emabarrassing fixup, I checked the wrong bit and broke the
unbreak/wakeup logic.
v4: Also handle deadlocks in pin_to_display.
v5: Review from Michel:
- Fixup the BUILD_BUG_ON
- Don't forget about the overlay
Cc: Michel Thierry <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Tvrtko Ursulin <[email protected]> (v2)
Cc: Michel Thierry <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Michel Thierry <[email protected]>
|
|
Blocking in a worker is ok, that's what the unbound_wq is for. And it
unifies the paths between the blocking and nonblocking commit, giving
me just one path where I have to implement the deadlock avoidance
trickery in the next patch.
I first tried to implement the following patch without this rework, but
force-completing i915_sw_fence creates some serious challenges around
properly cleaning things up. So wasn't a feasible short-term approach.
Another approach would be to simple keep track of all pending atomic
commit work items and manually queue them from the reset code. With the
caveat that double-queue in case we race with the i915_sw_fence must be
avoided. Given all that, taking the cost of a double schedule in atomic
for the short-term fix is the best approach, but can be changed in the future of course.
v2: Amend commit message (Chris).
v3: Add comment explaining why we do nothing in the sw_fence complete
callback (Michel).
Reviewed-by: Maarten Lankhorst <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Tvrtko Ursulin <[email protected]> (v2)
Cc: Michel Thierry <[email protected]>
Reviewed-by: Michel Thierry <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
... using the biggest hammer we have. This is essentially a weaponized
version of the timeout-based wedging Chris added in
commit 36703e79a982c8ce5a8e43833291f2719e92d0d1
Author: Chris Wilson <[email protected]>
Date: Thu Jun 22 11:56:25 2017 +0100
drm/i915: Break modeset deadlocks on reset
Because defense-in-depth is good it's good to still have both. Also
note that with the locking change we can now restrict this a lot (old
gpus and special testing only), so this doesn't kill the TDR benefits
on at least anything remotely modern.
And futuremore with a few tricks it should be possible to make a much
more educated guess about whether an atomic commit is stuck waiting on
the gpu (atomic_t counting the pending i915_sw_fence used by the
atomic modeset code should do it), so we can improve this.
But for now just start with something that is guaranteed to recover
faster, for much better CI througput.
This defacto reverts TDR on these platforms, but there's not really a
single commit to specify as the sole offender.
v2: Add a debug message to explain what's going on. We can't DRM_ERROR
because that spams CI. And the timeout based fallback still prints a
DRM_ERROR, in case something goes wrong.
v3: Fix comment layout (Michel)
Fixes: 4680816be336 ("drm/i915: Wait first for submission, before waiting for request completion")
Fixes: 221fe7994554 ("drm/i915: Perform a direct reset of the GPU from the waiter")
Cc: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Tvrtko Ursulin <[email protected]> (v2)
Cc: Michel Thierry <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]> (v2)
Reviewed-by: Michel Thierry <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Update gen9 renderstate to account the, long overdue, changes for
igt commit 5c07135b7bd2 ("tools/null_state/gen9: Send all
components in VF state").
Signed-off-by: Mika Kuoppala <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
|
|
Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes:
- compressed boot: Ignore a generated .c file
- VDSO: Fix a register clobber list
- DECstation: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
- Octeon: Fix recent cleanups that cleaned away a bit too much thus
breaking the arch side of the EDAC and USB drivers.
- uasm: Fix duplicate const in "const struct foo const bar[]" which
GCC 7.1 no longer accepts.
- Fix race on setting and getting cpu_online_mask
- Fix preemption issue. To do so cleanly introduce macro to get the
size of L3 cache line.
- Revert include cleanup that sometimes results in build error
- MicroMIPS uses bit 0 of the PC to indicate microMIPS mode. Make
sure this bit is set for kernel entry as well.
- Prevent configuring the kernel for both microMIPS and MT. There are
no such CPUs currently and thus the combination is unsupported and
results in build errors.
This has been sitting in linux-next for a few days and has survived
automated testing by Imagination's test farm. No known regressions
pending except a number of issues that crept up due to lots of people
switching to GCC 7.1"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Set ISA bit in entry-y for microMIPS kernels
MIPS: Prevent building MT support for microMIPS kernels
MIPS: PCI: Fix smp_processor_id() in preemptible
MIPS: Introduce cpu_tcache_line_size
MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression
MIPS: VDSO: Fix clobber lists in fallback code paths
Revert "MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>."
MIPS: OCTEON: Fix USB platform code breakage.
MIPS: Octeon: Fix broken EDAC driver.
MIPS: gitignore: ignore generated .c files
MIPS: Fix race on setting and getting cpu_online_mask
MIPS: mm: remove duplicate "const" qualifier on insn_table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three firmware core fixes for 4.13-rc5.
All three of these fix reported issues and have been floating around
for a few weeks. They have been in linux-next with no reported
problems"
* tag 'driver-core-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware: avoid invalid fallback aborts by using killable wait
firmware: fix batched requests - send wake up on failure on direct lookups
firmware: fix batched requests - wake all waiters
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are two patches for 4.13-rc5.
One is a fix for a reported thunderbolt issue, and the other a fix for
an MEI driver issue. Both have been in linux-next with no reported
issues"
* tag 'char-misc-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
thunderbolt: Do not enumerate more ports from DROM than the controller has
mei: exclude device from suspend direct complete optimization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are two tty serial driver fixes for 4.13-rc5. One is a revert of
a -rc1 patch that turned out to not be a good idea, and the other is a
fix for the pl011 serial driver.
Both have been in linux-next with no reported issues"
* tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: Delete dead code for CIR serial ports"
tty: pl011: fix initialization order of QDF2400 E44
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/iio fixes from Greg KH:
"Here are some Staging and IIO driver fixes for 4.13-rc5.
Nothing major, just a number of small fixes for reported issues. All
of these have been in linux-next for a while now with no reported
issues. Full details are in the shortlog"
* tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING
iio: aspeed-adc: wait for initial sequence.
iio: accel: bmc150: Always restore device to normal mode after suspend-resume
staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read
iio: adc: axp288: Fix the GPADC pin reading often wrongly returning 0
iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits
iio: accel: st_accel: add SPI-3wire support
iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications"
iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable
iio: pressure: st_pressure_core: disable multiread by default for LPS22HB
iio: light: tsl2563: use correct event code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes and new device ids for
4.13-rc5. There is the usual gadget driver fixes, some new quirks for
"messy" hardware, and some new device ids.
All have been in linux-next with no reported issues"
* tag 'usb-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: pl2303: add new ATEN device id
usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter
USB: Check for dropped connection before switching to full speed
usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume
usb: renesas_usbhs: gadget: fix unused-but-set-variable warning
usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3
usb: phy: phy-msm-usb: Fix usage of devm_regulator_bulk_get()
usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling
usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets
USB: serial: option: add D-Link DWM-222 device ID
usb: musb: fix tx fifo flush handling again
usb: core: unlink urbs from the tail of the endpoint's urb_list
usb-storage: fix deadlock involving host lock and scsi_done
uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069
USB: hcd: Mark secondary HCD as dead if the primary one died
USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
|
|
Pull another MTD fix from Brian Norris:
"An mtdblock regression occurred in -rc1 (all writes were broken!), in
the process of some block subsystem refactoring. Noticed and fixed
last week, but I'm a little slow on the uptake"
* tag 'for-linus-20170812' of git://git.infradead.org/linux-mtd:
mtd: blkdevs: Fix mtd block write failure
|
|
All the MTD block write requests are failing with
following error messages
mkfs.ext4 /dev/mtdblock0
print_req_error: I/O error, dev mtdblock0, sector 0
Buffer I/O error on dev mtdblock0, logical block 0,
lost async page write
The control is going to default case after block write request
because of missing return.
Fixes: commit 2a842acab109 ("block: introduce new block status code type")
Signed-off-by: Abhishek Sahu <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
|
|
Pull SCSI target fixes from Nicholas Bellinger:
"The highlights include:
- Fix iscsi-target payload memory leak during
ISCSI_FLAG_TEXT_CONTINUE (Varun Prakash)
- Fix tcm_qla2xxx incorrect use of tcm_qla2xxx_free_cmd during ABORT
(Pascal de Bruijn + Himanshu Madhani + nab)
- Fix iscsi-target long-standing issue with parallel delete of a
single network portal across multiple target instances (Gary Guo +
nab)
- Fix target dynamic se_node GPF during uncached shutdown regression
(Justin Maggard + nab)"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Fix node_acl demo-mode + uncached dynamic shutdown regression
iscsi-target: Fix iscsi_np reset hung task during parallel delete
qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT (v2)
cxgbit: fix sg_nents calculation
iscsi-target: fix invalid flags in text response
iscsi-target: fix memory leak in iscsit_setup_text_cmd()
cxgbit: add missing __kfree_skb()
tcmu: free old string on reconfig
tcmu: Fix possible to/from address overflow when doing the memcpy
|
|
We should emphasize that irq raising function depends on Gen.
v2: use yet another better name (Chris)
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Some fixes for Xen:
- a fix for a regression introduced in 4.13 for a Xen HVM-guest
configured with KASLR
- a fix for a possible deadlock in the xenbus driver when booting the
system
- a fix for lost interrupts in Xen guests"
* tag 'for-linus-4.13b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: Fix interrupt lost during irq_disable and irq_enable
xen: avoid deadlock in xenbus
xen: fix hvm guest with kaslr enabled
xen: split up xen_hvm_init_shared_info()
x86: provide an init_mem_mapping hypervisor hook
|
|
When switching between contexts using the aliasing_ppgtt, the VM is
shared. We don't need to reload the PD registers unless they are dirty.
Martin Peres reported an issue that looks like corruption between
Haswell context switches, bisecting to commit f9326be5f1d3 ("drm/i915:
Rearrange switch_context to load the aliasing ppgtt on first use").
Switching between the same mm (the aliasing_ppgtt is used for all
contexts in this case) should be a nop, but appears to trigger some
side-effects in the context switch. However, as we know the switch
is redundant in this case, we can skip it and continue to ignore the
issue until somebody feels strong enough to investigate full-ppgtt on
gen7 again!
Except.. Martin was using full-ppgtt which is not supported as it
doesn't work correctly yet. So whilst the bisect did yield valuable
information about the failures, the fix should not have any user impact
under default settings, with the exception of a slightly lower
throughput on xcs as the VM would always be reloaded.
v2: Also remember to set the legacy_active_context following the switch
on xcs (commit e8a9c58fcd9a ("drm/i915: Unify active context tracking
between legacy/execlists/guc"))
Fixes: f9326be5f1d3 ("drm/i915: Rearrange switch_context to load the aliasing ppgtt on first use")
Fixes: e8a9c58fcd9a ("drm/i915: Unify active context tracking between legacy/execlists/guc")
Reported-by: Martin Peres <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Cc: Martin Peres <[email protected]>
Reviewed-by: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since we do use the SW_SYNC in igt for validating dma-fence and
sync_file, and wish to expand usage to cover driver independent portions
of syncobj interaction, ensure SW_SYNC is included in our testing
Kconfig.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Jason Ekstrand <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Joonas Lahtinen <[email protected]>
|
|
Pull NFS client fixes from Anna Schumaker:
"A few more NFS client bugfixes from me for rc5.
Dros has a stable fix for flexfiles to prevent leaking the
nfs4_ff_ds_version arrays when freeing a layout, Trond fixed a
potential recovery loop situation with the TEST_STATEID operation, and
Christoph fixed up the pNFS blocklayout Kconfig options to prevent
unsafe use with kernels that don't have large block device support.
Summary:
Stable fix:
- fix leaking nfs4_ff_ds_version array
Other fixes:
- improve TEST_STATEID OLD_STATEID handling to prevent recovery loop
- require 64-bit sector_t for pNFS blocklayout to prevent 32-bit
compile errors"
* tag 'nfs-for-4.13-5' of git://git.linux-nfs.org/projects/anna/linux-nfs:
pnfs/blocklayout: require 64-bit sector_t
NFSv4: Ignore NFS4ERR_OLD_STATEID in nfs41_check_open_stateid()
nfs/flexfiles: fix leak of nfs4_ff_ds_version arrays
|
|
Pull block fixes from Jens Axboe:
"A set of fixes that should go into this series. This contains:
- Fix from Bart for blk-mq requeue queue running, preventing a
continued loop of run/restart.
- Fix for a bio/blk-integrity issue, in two parts. One from
Christoph, fixing where verification happens, and one from Milan,
for a NULL profile.
- NVMe pull request, most of the changes being for nvme-fc, but also
a few trivial core/pci fixes"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme: fix directive command numd calculation
nvme: fix nvme reset command timeout handling
nvme-pci: fix CMB sysfs file removal in reset path
lpfc: support nvmet_fc defer_rcv callback
nvmet_fc: add defer_req callback for deferment of cmd buffer return
nvme: strip trailing 0-bytes in wwid_show
block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time
bio-integrity: only verify integrity on the lowest stacked driver
bio-integrity: Fix regression if profile verify_fn is NULL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- fix lockdep splat when removing mmc_block module
- fix the logic for setting eMMC HS400ES signal voltage
MMC host:
- omap_hsmmc: add CMD23 capability to fix -EIO errors"
* tag 'mmc-v4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: block: fix lockdep splat when removing mmc_block module
mmc: mmc: correct the logic for setting HS400ES signal voltage
mmc: host: omap_hsmmc: Add CMD23 capability to omap_hsmmc driver
|
|
The idea is to have an unique place to decide the pin-port
per platform.
So let's create this function now without any functional
change. Just adding together code from hdmi and dp together.
v2: Add missing pin for port A.
v3: Fix typo on subject.
Avoid behaviour change so add WARN_ON and return
if port A on HDMI. (by DK).
Cc: Dhinakaran Pandiyan <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Dhinakaran Pandiyan <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We will soon need to make that pin port association per
platform, so let's try to simplify it beforehand.
Also we are moving the backwards port to pin
here as well so let's use a standardized way.
One extra possibility here would be to add a
MISSING_CASE along with PORT_NONE, but I don't want
to change this behaviour for now.
Cc: Ville Syrjälä <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Dhinakaran Pandiyan <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Pull fbdev fixes from Bartlomiej Zolnierkiewicz:
- allow user to disable write combined mapping in efifb driver (Dave
Airlie)
- fix use after free bugs on driver removal in imxfb driver (Dan
Carpenter)
- fix unused variable warning in omapfb driver (Arnd Bergmann)
* tag 'fbdev-v4.13-rc5' of git://github.com/bzolnier/linux:
efifb: allow user to disable write combined mapping.
fbdev: omapfb: remove unused variable
video: fbdev: imxfb: use after free in imxfb_remove()
|
|
Different from SKL we don't need ctrl1 and cfgcr2, but
we need to dump cfgcr0 and cfgcr1 instead.
v2: rebase and commit message
Cc: Clint Taylor <[email protected]>
Cc: Mika Kahola <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Mika Kahola <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
"Frequencies over 5.4 GHz only supported on certain
DDI ports and SKUs, and requires Vccio >= 0.95V."
More specifically, for current CNL SKUs available
(CNL-U and CNL-Y) we have:
DDI A - 5.4G eDP
DDI B - 8.1G DP
DDI C - 8.1G DP
DDI D - 5.4G DP
v2: Rebase on top of source_rates changes.
v3: Address the max 5.4 x 8.1 per DDI and also consider vccio.
Cc: Mika Kahola <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Manasi Navare <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
For 0.85V cnl_get_buf_trans_edp() returns the DP table, instead of EDP.
Use the correct table.
The error was pointed out by this clang warning:
drivers/gpu/drm/i915/intel_ddi.c:392:39: warning: variable
'cnl_ddi_translations_edp_0_85V' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_85V[] = {
Fixes: cf54ca8bc567 ("drm/i915/cnl: Implement voltage swing sequence.")
Signed-off-by: Matthias Kaehlcke <[email protected]>
Reviewed-by: Manasi Navare <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Fix a few bugs in fuse"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: set mapping error in writepage_locked when it fails
fuse: Dont call set_page_dirty_lock() for ITER_BVEC pages for async_dio
fuse: initialize the flock flag in fuse_file on allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"Fix a NULL-pointer dereference in arm_smmu_add_device"
* tag 'iommu-fixes-v4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: fix null-pointer dereference in arm_smmu_add_device
|
|
The blocklayout code does not compile cleanly for a 32-bit sector_t,
and also has no reliable checks for devices sizes, which makes it
unsafe to use with a kernel that doesn't support large block devices.
Signed-off-by: Christoph Hellwig <[email protected]>
Reported-by: Arnd Bergmann <[email protected]>
Fixes: 5c83746a0cf2 ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing")
Signed-off-by: Anna Schumaker <[email protected]>
|
|
LEGO MINDSTORMS EV3 has an LCD with a ST7586 controller. This adds a new
module for the ST7586 controller with parameters for the LEGO MINDSTORMS
EV3 LCD display.
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Noralf Trønnes <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This adds a new binding for Sitronix ST7586 display panels.
Using lego as the vendor prefix in the compatible string because the display
panel I am working with is an integral part of the LEGO MINDSTORMS EV3.
Signed-off-by: David Lechner <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The structure intel_sprite_plane_funcs is local to the source
and does not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol 'intel_sprite_plane_funcs' was not declared. Should it be static?
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.
Generated by: scripts/coccinelle/api/drm-get-put.cocci
Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"All fixes for code that went in this cycle.
- a revert of an optimisation to the syscall exit path, which could
lead to an oops on either older machines or machines with > 1TB of
memory
- disable some deep idle states if the firmware configuration for
them fails
- re-enable HARD/SOFT lockup detectors in defconfigs after a Kconfig
change
- six fairly small patches fixing bugs in our new watchdog code
Thanks to: Gautham R Shenoy, Nicholas Piggin"
* tag 'powerpc-4.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/watchdog: add locking around init/exit functions
powerpc/watchdog: Fix marking of stuck CPUs
powerpc/watchdog: Fix final-check recovered case
powerpc/watchdog: Moderate touch_nmi_watchdog overhead
powerpc/watchdog: Improve watchdog lock primitive
powerpc: NMI IPI improve lock primitive
powerpc/configs: Re-enable HARD/SOFT lockup detectors
powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT states when stop-api fails
Revert "powerpc/64: Avoid restore_math call if possible in syscall exit"
|
|
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.
Generated by: scripts/coccinelle/api/drm-get-put.cocci
Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.
Generated by: scripts/coccinelle/api/drm-get-put.cocci
Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.
Generated by: scripts/coccinelle/api/drm-get-put.cocci
Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.
Generated by: scripts/coccinelle/api/drm-get-put.cocci
Signed-off-by: Cihangir Akturk <[email protected]>
Acked-by: Joel Stanley <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.
Generated by: scripts/coccinelle/api/drm-get-put.cocci
Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.
Generated by: scripts/coccinelle/api/drm-get-put.cocci
Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.
Generated by: scripts/coccinelle/api/drm-get-put.cocci
Signed-off-by: Cihangir Akturk <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|