aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-07-01i915: fix ironlake edp panel setup (v4)Dave Airlie1-3/+24
The eDP spec claims a 20% overhead for the 8:10 encoding scheme used on the wire. Take this into account when picking the lane/clock speed for the panel. v3: some panels are out of spec, try our best to deal with them, don't refuse modes on eDP panels, and try the largest allowed settings if all else fails on eDP. v4: fix stupid typo, forgot to git add before amending. Fixes several reports in bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=28070 Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-07-01drm/i915: don't access FW_BLC_SELF on 965GJesse Barnes2-4/+6
The register offset for FW_BLC_SELF is a totally different set of bits on Broadwater (it's actually MI_RDRET_STATE), so don't treat it like FW_BLC_SELF on 965G chips. Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=26874. Cc: [email protected] Tested-by: Norman Yarvin <[email protected]> Signed-off-by: Jesse Barnes <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-07-01drm/i915: Account for space on the ring buffer consumed whilst wrapping.Chris Wilson1-0/+1
If we fill the tail of the physical ring buffer with NOOP when wrapping, we need to account for the reduction in available space. Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Eric Anholt <[email protected]>
2010-07-01ata_generic: implement ATA_GEN_* flags and force enable DMA on MBP 7,1Tejun Heo1-7/+19
IDE mode of MCP89 on MBP 7,1 doesn't set DMA enable bits in the BMDMA status register. Make the following changes to work around the problem. * Instead of using hard coded 1 in id->driver_data as class code match, use ATA_GEN_CLASS_MATCH and carry the matched id in host->private_data. * Instead of matching PCI_VENDOR_ID_CENATEK, use ATA_GEN_FORCE_DMA flag in id instead. * Add ATA_GEN_FORCE_DMA to the id entry of MBP 7,1. Signed-off-by: Tejun Heo <[email protected]> Cc: Peer Chen <[email protected]> Cc: [email protected] Reported-by: Anders Østhus <[email protected]> Reported-by: Andreas Graf <[email protected]> Reported-by: Benoit Gschwind <[email protected]> Reported-by: Damien Cassou <[email protected]> Reported-by: [email protected] Signed-off-by: Jeff Garzik <[email protected]>
2010-07-01ahci,ata_generic: let ata_generic handle new MBP w/ MCP89Tejun Heo3-0/+17
For yet unknown reason, MCP89 on MBP 7,1 doesn't work w/ ahci under linux but the controller doesn't require explicit mode setting and works fine with ata_generic. Make ahci ignore the controller on MBP 7,1 and let ata_generic take it for now. Reported in bko#15923. https://bugzilla.kernel.org/show_bug.cgi?id=15923 NVIDIA is investigating why ahci mode doesn't work. Signed-off-by: Tejun Heo <[email protected]> Cc: Peer Chen <[email protected]> Cc: [email protected] Reported-by: Anders Østhus <[email protected]> Reported-by: Andreas Graf <[email protected]> Reported-by: Benoit Gschwind <[email protected]> Reported-by: Damien Cassou <[email protected]> Reported-by: [email protected] Signed-off-by: Jeff Garzik <[email protected]>
2010-07-01libahci: Fix bug in storing EM messagesHarry Zhang1-2/+3
In function ahci_store_em_buffer(), if the input (signed char*) buffer contains negative data, the constructed 32-bit long message data may be wrong. Signed-off-by: Harry Zhang <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2010-07-01perf tools: Fix find tids routine by excluding "." and ".."Gui Jianfeng1-1/+10
Introduce a filter function to skip "." and ".." directories when calculating tid number, otherwise tid 0 will be included in the all_tid result array. Cc: Ingo Molnar <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Gui Jianfeng <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2010-07-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds1-0/+5
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: docs: add an entry for imx2_wdt
2010-07-01Merge branch 'drm-fixes' of ↵Linus Torvalds26-121/+257
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits) drm/radeon/kms: remove rv100 bios connector quirk drm/radeon/kms/pm: fix power state indexing on igp chips in dynpm mode DRM / radeon / KMS: Fix hibernation regression related to radeon PM (was: Re: [Regression, post-2.6.34] Hibernation broken on machines with radeon/KMS and r300) drm/radeon/kms/igp: fix possible divide by 0 in bandwidth code (v2) drm/radeon: add quirk to make HP nx6125 laptop resume. drm/radeon/kms: add some missing regs to evergreen gpu init drm/radeon/kms: fix typos in evergreen command checker drm/radeon/kms: avoid oops on mac r4xx cards fb: fix colliding defines for fb flags. drm/radeon/kms: Force HDP_NONSURF to maximum size drm/radeon/kms: disable frac fb dividers for rs6xx drm/radeon/kms: don't read attempt to read bios from VRAM on unposted GPU. drm/radeon/kms: fix typo in evergreen_gpu_init drm/radeon/kms: return ret in cursor_set failure path drm/ttm: non pooled page allocation should have GFP_USER set drm/radeon/r100/r200: fix calculation of compressed cube maps drm/radeon/r200: handle more hw tex coord types drm/radeon/kms: CS checker texture fixes for r1xx/r2xx/r3xx drm/radeon: add fake RN50 table for powerpc drm/fb: Fix video= mode computation ...
2010-07-01Merge branch 'release' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix spinaphore down_spin()
2010-07-01vhost: add unlikely annotations to error pathMichael S. Tsirkin2-28/+29
patch 'break out of polling loop on error' caused a minor performance regression on my machine: recover that performance by adding a bunch of unlikely annotations in the error handling. Signed-off-by: Michael S. Tsirkin <[email protected]>
2010-07-01watchdog: docs: add an entry for imx2_wdtFabio Estevam1-0/+5
Add an entry for imx2_wdt in watchdog-parameters.txt Signed-off-by: Fabio Estevam <[email protected]> Acked-by: Wolfram Sang <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2010-07-01Merge branch 'imx-for-2.6.35' of git://git.pengutronix.de/git/imx/linux-2.6Russell King1-11/+22
2010-07-01Merge branch 'fix' of ↵Russell King5-29/+18
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-07-01ARM: 6195/1: OMAP3: pmu: make CPU_HAS_PMU dependent on OMAP3_EMUWill Deacon1-1/+2
CPU performance event counters on v7 cores will only operate if either the NIDEN or DBGEN signals are driven high. For the OMAP3 platform, these signals are driven low by default but DBGEN can be asserted by selecting the OMAP3_EMU Kconfig option, which enables the virtual clock for hardware debugging peripherals. Acked-by: Jean Pihet <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-07-01ARM: 6194/1: change definition of cpu_relax() for ARM11MPCoreWill Deacon1-0/+4
Linux expects that if a CPU modifies a memory location, then that modification will eventually become visible to other CPUs in the system. On an ARM11MPCore processor, loads are prioritised over stores so it is possible for a store operation to be postponed if a polling loop immediately follows it. If the variable being polled indirectly depends on the outstanding store [for example, another CPU may be polling the variable that is pending modification] then there is the potential for deadlock if interrupts are disabled. This deadlock occurs in the KGDB testsuire when executing on an SMP ARM11MPCore configuration. This patch changes the definition of cpu_relax() to smp_mb() for ARMv6 cores, forcing a flushing of the write buffer on SMP systems before the next load takes place. If the Kernel is not compiled for SMP support, this will expand to a barrier() as before. Acked-by: Catalin Marinas <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-07-01ARM: 6193/1: RealView: Align the machine_desc.phys_io to 1MB sectionCatalin Marinas5-5/+10
When not aligned, random bits could be written in the initial page table by the __create_page_tables() function. Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-07-01ARM: 6192/1: VExpress: Align the machine_desc.phys_io to 1MB sectionCatalin Marinas1-1/+2
When not aligned, random bits could be written in the initial page table by the __create_page_tables() function. Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-07-01ARM: 6188/1: Add a config option for the ARM11MPCore DMA cache maintenance ↵Catalin Marinas2-3/+31
workaround Commit f4d6477f introduced a workaround for the lack of hardware broadcasting of the cache maintenance operations on ARM11MPCore. However, the workaround is only valid on CPUs that do not do speculative loads into the D-cache. This patch adds a Kconfig option with the corresponding help to make the above clear. When the DMA_CACHE_RWFO option is disabled, the kernel behaviour is that prior to the f4d6477f commit. This also allows ARMv6 UP processors with speculative loads to work correctly. For other processors, a different workaround may be needed. Cc: Ronen Shitrit <[email protected]> Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-07-01ARM: 6187/1: The v6_dma_inv_range() function must preserve data on SMPCatalin Marinas1-1/+2
A recent patch for DMA cache maintenance on ARM11MPCore added a write for ownership trick to the v6_dma_inv_range() function. Such operation destroys data already present in the buffer. However, this function is used with with dma_sync_single_for_device() which is supposed to preserve the existing data transfered into the buffer. This patch adds a combination of read/write for ownership to preserve the original data. Reported-by: Ronen Shitrit <[email protected]> Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-07-01ARM: 6186/1: Avoid the CONSISTENT_DMA_SIZE warning on noMMU buildsCatalin Marinas1-9/+9
This macro is not defined when !CONFIG_MMU so this patch moves the CONSISTENT_* definitions to the CONFIG_MMU section. Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-07-01ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPIDaniel Mack1-11/+22
arch/arm/mach-mx3/built-in.o: In function `mx31lilly_board_init': mach-kzm_arm11_01.c:(.init.text+0x674): undefined reference to `otg_ulpi_create' mach-kzm_arm11_01.c:(.init.text+0x68c): undefined reference to `otg_ulpi_create' mach-kzm_arm11_01.c:(.init.text+0x744): undefined reference to `mxc_ulpi_access_ops' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Daniel Mack <[email protected]> Signed-off-by: Sascha Hauer <[email protected]>
2010-07-01sched: Cure nr_iowait_cpu() usersPeter Zijlstra4-13/+13
Commit 0224cf4c5e (sched: Intoduce get_cpu_iowait_time_us()) broke things by not making sure preemption was indeed disabled by the callers of nr_iowait_cpu() which took the iowait value of the current cpu. This resulted in a heap of preempt warnings. Cure this by making nr_iowait_cpu() take a cpu number and fix up the callers to pass in the right number. Signed-off-by: Peter Zijlstra <[email protected]> Cc: Arjan van de Ven <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Cc: Rafael J. Wysocki <[email protected]> Cc: Maxim Levitsky <[email protected]> Cc: Len Brown <[email protected]> Cc: Pavel Machek <[email protected]> Cc: Jiri Slaby <[email protected]> Cc: [email protected] LKML-Reference: <1277968037.1868.120.camel@laptop> Signed-off-by: Ingo Molnar <[email protected]>
2010-07-01fs-writeback: fix kernel-doc warningsRandy Dunlap1-1/+1
Fix kernel-doc to match the function's changed args. Warning(fs/fs-writeback.c:190): No description found for parameter 'args' Warning(fs/fs-writeback.c:190): Excess function parameter 'sb' description in 'bdi_queue_work_onstack' Signed-off-by: Randy Dunlap <[email protected]> Cc: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2010-06-30x86, Calgary: Limit the max PHB number to 256Darrick J. Wong1-3/+1
The x3950 family can have as many as 256 PCI buses in a single system, so change the limits to the maximum. Since there can only be 256 PCI buses in one domain, we no longer need the BUG_ON check. Signed-off-by: Darrick J. Wong <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: H. Peter Anvin <[email protected]>
2010-07-01drm/radeon/kms: remove rv100 bios connector quirkAlex Deucher1-9/+0
Some RV100 cards with 2 VGA ports show up with DVI+VGA, however some boards with DVI+VGA have the same subsystem ids. Better to have a VGA port show up as DVI than having a non-useable DVI port. reported by DHR in irc. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms/pm: fix power state indexing on igp chips in dynpm modeAlex Deucher1-3/+8
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28745 Signed-off-by: Alex Deucher <[email protected]> Tested-by: Rafał Miłecki <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01DRM / radeon / KMS: Fix hibernation regression related to radeon PM (was: ↵Rafael J. Wysocki2-8/+36
Re: [Regression, post-2.6.34] Hibernation broken on machines with radeon/KMS and r300) There is a regression from 2.6.34 related to the recent radeon power management changes, caused by attempting to cancel a delayed work item that's never been scheduled. However, the code as is has some other issues potentially leading to visible problems. First, the mutex around cancel_delayed_work() in radeon_pm_suspend() doesn't really serve any purpose, because cancel_delayed_work() only tries to delete the work's timer. Moreover, it doesn't prevent the work handler from running, so the handler can do some wrong things if it wins the race and in that case it will rearm itself to do some more wrong things going forward. So, I think it's better to wait for the handler to return in case it's already been queued up for execution. Also, it should be prevented from rearming itself in that case. Second, in radeon_set_pm_method() the cancel_delayed_work() is not sufficient to prevent the work handler from running and queing up itself for the next run (the failure scenario is that cancel_delayed_work() returns 0, so the handler is run, it waits on the mutex and then rearms itself after the mutex has been released), so again the work handler should be prevented from rearming itself in that case.. Finally, there's a potential deadlock in radeon_pm_fini(), because cancel_delayed_work_sync() is called under rdev->pm.mutex, but the work handler tries to acquire the same mutex (if it wins the race). Fix the issues described above. Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms/igp: fix possible divide by 0 in bandwidth code (v2)Alex Deucher3-17/+23
Some IGP systems specify the system memory clock in the Firmware table rather than the IGP info table. Check both and make sure we have a value system memory clock value. v2: make sure rs690_pm_info is called on rs780/rs880 as well. fixes a regression since 07d4190327b02ab3aaad25a2d168f79d92e8f8c2. Reported-by: Markus Trippelsdorf <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Tested-by: Markus Trippelsdorf <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon: add quirk to make HP nx6125 laptop resume.Dave Airlie1-0/+8
For some reason on resume, executing the BIOS scripts locks up the whole chipset, by avoiding the dynclk table the machine resumes properly and seems to function okay. Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms: add some missing regs to evergreen gpu initAlex Deucher2-0/+26
Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms: fix typos in evergreen command checkerAlex Deucher2-7/+7
Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms: avoid oops on mac r4xx cardsAlex Deucher1-0/+7
They don't have an atombios so don't attempt to use it for eng/mem clocks. Reported by spoonb on #radeon fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28671 Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01fb: fix colliding defines for fb flags.Dave Airlie1-2/+2
When I added the flags I must have been using a 25 line terminal and missed the following flags. The collided with flag has one user in staging despite being in-tree for 5 years. I'm happy to push this via my drm tree unless someone really wants to do it. Signed-off-by: Dave Airlie <[email protected]> Cc: [email protected]
2010-07-01drm/radeon/kms: Force HDP_NONSURF to maximum sizeJerome Glisse3-3/+3
HDP non surface should cover the whole VRAM but we were misscomputing the size and we endup in some case not covering the VRAM at all (if VRAM size were > 1G). Covering more than the VRAM size shouldn't be an issue. Fix : https://bugs.freedesktop.org/show_bug.cgi?id=28016 [airlied: add evergreen fix] Signed-off-by: Jerome Glisse <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms: disable frac fb dividers for rs6xxAlex Deucher1-1/+1
Should fix fdo bug 28331: https://bugs.freedesktop.org/show_bug.cgi?id=28331 Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms: don't read attempt to read bios from VRAM on unposted GPU.Dave Airlie1-0/+4
Since the VGA switcheroo, we'd attempt to read the BIOS from VRAM on startup but on some unposted cards this can cause hangs/crashes. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28592 (further problem pointed out by agd5f on IGP systems) Reported-by: Reilithion on #radeon Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms: fix typo in evergreen_gpu_initAlex Deucher1-5/+5
Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms: return ret in cursor_set failure pathMatt Turner1-1/+1
We were returning 0 in both the success and failure paths. Noticed while investigating FDO bug 26403. Signed-off-by: Matt Turner <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/ttm: non pooled page allocation should have GFP_USER setJerome Glisse1-1/+1
Non pooled page allocation should have GFP_USER set so allocation can wait and reclaim page from other process (ie non atomic). Signed-off-by: Jerome Glisse <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/r100/r200: fix calculation of compressed cube mapsRoland Scheidegger1-27/+31
This needs similar handling to other compressed textures. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=26428 Signed-off-by: [email protected] Signed-off-by: Alex Deucher <[email protected]> Cc: stable <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/r200: handle more hw tex coord typesRoland Scheidegger1-0/+2
Code did not handle projected 2d and depth coordinates, meaning potentially set 3d or cube special handling might stick. (Not sure what depth coord actually does, but I guess handling it like a normal coordinate is the right thing to do.) Might be related to https://bugs.freedesktop.org/show_bug.cgi?id=26428 Signed-off-by: [email protected] Signed-off-by: Alex Deucher <[email protected]> Cc: stable <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms: CS checker texture fixes for r1xx/r2xx/r3xxRoland Scheidegger3-0/+11
fixes: https://bugs.freedesktop.org/show_bug.cgi?id=28459 agd5f: apply to r1xx/r2xx as well. Signed-off-by: Roland Scheidegger <[email protected]> Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon: add fake RN50 table for powerpcDave Airlie2-0/+33
This works well enough on a js21, but it would be nice if IBM could supply more tables for the later Power6/7 machines. Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/fb: Fix video= mode computationAdam Jackson1-6/+13
Reduced blanking is valid only when doing CVT modes. Also, generate GTF modes unless CVT was requested; CVT devices are required to support GTF, but the reverse is not true. [airlied: fix typo] Signed-off-by: Adam Jackson <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms: fix DP after DPMS cycleAlex Deucher1-2/+2
The transmitter needs to be enabled before the link is trained. Reported-By: Lars Doelle <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: stable <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms: fix dpms state on resumeCedric Godin1-0/+7
When suspending, we turn the display hw off, at resume the screen will stay black. This patch turn it on. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16180 Signed-off-by: Cedric Godin <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-07-01drm/radeon/kms: fix bandwidth calculation when sideport is presentAlex Deucher1-5/+1
Fixes fdo bug 27529: https://bugs.freedesktop.org/show_bug.cgi?id=27529 Reported-by: [email protected] Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds16-68/+145
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: rtl8192u_usb: Add LG device ID 043e:7a01 Staging: rtl8192s_usb: Remove duplicate device ID Staging: rt2870: add device id for Zyxel NWD-270N Staging: comedi: fix read past end of array in cb_pcidda_attach() Staging: rtl8192su: add device ids Staging: rtl8192su: remove device ids Staging: rtl8187se: Fix compile warnings in 2.6.35-rc2 Staging: wlags49_h2: Fix build error when CONFIG_SYSFS is not set Staging: wlags49_h2: add missing <linux/string.h> for strlen Staging: hv: fix hv_utils module to properly autoload staging: hv: Fix race condition on vmbus channel initialization Staging: comedi: drivers: adl_pci9111: Fix AI commands in TRIG_FOLLOW case Staging: mrst-touchscreen: fix dereferencing free memory Staging: batman-adv: fix function prototype Staging: batman-adv: return -EFAULT on copy_to_user errors staging: usbip: usbip_common: kill rx thread on tx thread creation error.
2010-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds19-225/+209
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (22 commits) USB: gadget: f_mass_storage: stale common->fsg value bug fix USB: gadget: f_mass_storage: fixed fs descriptors not being updated USB: musb: Enable the maximum supported burst mode for DMA USB: musb: fix Blackfin ulpi stubs USB: MUSB: make non-OMAP platforms build with CONFIG_PM=y USB: musb_core: make disconnect and suspend interrupts work again USB: obey the sysfs power/wakeup setting USB: gadget eth: Fix calculate CRC32 in EEM USB: qcserial: fix a memory leak in qcprobe error path USB: gadget/printer, fix sleep inside atomic USB: isp1362-hcd, fix double lock USB: serial: ftdi: correct merge conflict with CONTEC id USB: fix oops in usb_sg_init() USB: s3c2410: deactivate endpoints before gadget unbinding USB: ehci-mxc: bail out on transceiver problems USB: otg/ulpi: bail out on read errors usb: musb: Fix a bug by making suspend interrupt available in device mode USB: r8a66597: Fix failure in change of status USB: xHCI: Fix bug in link TRB activation change. USB: gadget: g_fs: possible invalid pointer reference bug fixed ...
Powered by cgit, Gruvboxed by Blaster4385.