Age | Commit message (Collapse) | Author | Files | Lines |
|
Add support for 44.1Khz frequency by dynamically calculating the slimbus
parameters instead of statically defining them.
Co-developed-by: Prudhvi Yarlagadda <[email protected]>
Signed-off-by: Prudhvi Yarlagadda <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Handle errors of getting presence rate for unsupported stream bitrate,
instead of sending -EINVAL in change content message.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If transfer in qcom_slim_ngd_xfer_msg_sync() fails, we need to drop the
PM runtime usage counter to have it balanced.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Slimbus core interrupt is getting fired after suspend. At this point
ADSP slimbus hardware is off with gated clocks which is leading to an
unclocked access when HLOS slimbus tried to read the interrupt
status register in the ISR.
Co-developed-by: Chandana Kishori Chiluveru <[email protected]>
Signed-off-by: Chandana Kishori Chiluveru <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add a schema for the ONIE tlv NVMEM layout that can be found on any ONIE
compatible networking device.
Describe all the possible NVMEM cells that can be produced by this
layout parser.
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As described on their website (see link below),
"The Open Network Install Environment (ONIE) is an open source
initiative that defines an open “install environment” for modern
networking hardware."
It is not a proper corporation per-se but rather more a group which
tries to spread the use of open source standards in the networking
hardware world.
Link: https://opencomputeproject.github.io/onie/
Signed-off-by: Miquel Raynal <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add a schema for the NVMEM layout on Kontron's sl28 boards.
Signed-off-by: Michael Walle <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
EEPROMs can be nvmem providers. Let's make all EEPROM bindings
reference nvmem.yaml as they should, so that nvmem cells and layout
parsers can be safely described within the EEPROM nodes.
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The nvmem devices description works like this:
* Most cases (EEPROM & co):
eeprom@x {
compatible = "<eeprom-compatible>";
...
};
* MTD case:
flash@y {
compatible = "<flash-compatible>";
...
otp {
compatible = "user-otp"; /* or "factory-otp" */
...
};
};
In the former case, the nvmem device is "eeprom@x", while in the latter
case the nvmem device is "otp".
Nvmem devices can produce nvmem cells. The current way to describe nvmem
cells is to locate them by providing their static byte and bit offset
and length. These information are stored in subnodes of the nvmem
device.
It is now a fact that such description does not fit more advanced use
cases where the location or the size of the cells may vary. There are
currently three known situations which require being described
differently: Kontron's SL28 VPD, ONIE's TLV table and U-Boot's
environment variables.
Hence, we need a way to describe the parsers that must be used in order
to make the dynamic discovery of the nvmem cells. This new description
must fit both use cases (the generic situation and the MTD case).
Let's create in both cases a container node named nvmem-layout whose
content will depend on the parser. Right now nvmem-layout.yaml is
"empty", but references to additional layout parser bindings will be
inserted in the near future. The final goal being something that looks
like:
* Most cases (EEPROM & co):
eeprom@x {
compatible = "<eeprom-compatible>";
...
nvmem-layout {
compatible = "<parser-compatible>";
...
};
};
* MTD case:
flash@y {
compatible = "<flash-compatible>";
...
otp {
compatible = "user-otp"; /* or "factory-otp" */
...
nvmem-layout {
compatible = "<parser-compatible>";
...
};
};
};
Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Broadcom uses U-Boot for a lot of their bcmbca familiy chipsets. They
decided to store U-Boot environment data inside U-Boot partition and to
use a custom header (with "uEnv" magic and env data length).
Add support for Broadcom's specific binding and their custom format.
Ref: 6b0584c19d87 ("dt-bindings: nvmem: u-boot,env: add Broadcom's variant binding")
Signed-off-by: Rafał Miłecki <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There is a spelling mistake in a Kconfig description. Fix it.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Despite not being listed nor required within the top level nvmem yaml
file, the "compatible" property is mandatory and is actually enforced by
all the nvmem provider bindings.
Unfortunately, the lack of compatible in the nvmem.yaml to level
description file lead to the example not matching anything and thus not
being checked at all.
Let's pick a compatible almost randomly (one which is already used with
the qfprom label) to make the example at least valid on a semantic
point of view and getting it checked.
Signed-off-by: Miquel Raynal <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Fix spelling typo in comment.
Reported-by: k2ci <[email protected]>
Signed-off-by: Jiangshan Yi <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add a new compatible for stm32mp13 support.
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Patrick Delaunay <[email protected]>
Reviewed-by: Fabrice Gasnier <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Inform NVMEM framework of type attribute for stm32-romem as NVMEM_TYPE_OTP
so userspace is able to know how the data is stored in BSEC.
Signed-off-by: Patrick Delaunay <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As the upper OTPs are ECC protected, they support only one 32 bits word
programming.
For a second modification of this word, these ECC become invalid and
this OTP will be no more accessible, the shadowed value is invalid.
This patch adds a warning to indicate an upper OTP update, because this
operation is dangerous as OTP is not locked by the driver after the first
update to avoid a second update.
Signed-off-by: Patrick Delaunay <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Support STM32MP15_BSEC_NUM_LOWER in stm32 romem config to prepare
the next SoC in STM32MP family.
Signed-off-by: Patrick Delaunay <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When a virtio console port is initialized, it is registered as an hvc
console using a virtual console number. If a KVM guest is started with
multiple virtio console devices, the same vtermno (or virtual console
number) can be used to allocate different hvc consoles, which leads to
various communication problems later on.
This is also reported in debugfs :
# grep vtermno /sys/kernel/debug/virtio-ports/*
/sys/kernel/debug/virtio-ports/vport1p1:console_vtermno: 1
/sys/kernel/debug/virtio-ports/vport2p1:console_vtermno: 1
/sys/kernel/debug/virtio-ports/vport3p1:console_vtermno: 2
/sys/kernel/debug/virtio-ports/vport4p1:console_vtermno: 3
Replace the next_vtermno global with an ID allocator and start the
allocation at 1 as it is today. Also recycle IDs when a console port
is removed.
Signed-off-by: Cédric Le Goater <[email protected]>
Reviewed-by: Thomas Huth <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The comment in scripts/kallsyms.c describing the usage of
scripts/kallsyms does not reflect the latest implementation.
Fix the comment to be equivalent to what the usage() function prints.
Signed-off-by: Yuma Ueda <[email protected]>
Reviewed-by: Miguel Ojeda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
@unit_mutex protects @unit from being freed, so obviously it should be
released after @unit is used, and not before.
This is a follow-up to commit 282a4b71816b ("char: xillybus: Prevent
use-after-free due to race condition") which ensures, among others, the
protection of @private_data after @unit_mutex has been released.
Reported-by: Hyunwoo Kim <[email protected]>
Signed-off-by: Eli Billauer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Move PXP mode state machine to SETUP mode only if
memory ready message sent successfully to the firmware.
Leave it in INIT mode otherwise to allow try to send message later.
Signed-off-by: Alexander Usyskin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When driver wakes up the firmware from the low power state,
it is sending a memory ready message.
The send is done via synchronous/blocking function to ensure
that firmware is in ready state. However, in case of firmware
undergoing reset send might be block forever.
To address this issue a timeout is added to blocking
write command on the internal bus.
Introduce the __mei_cl_send_timeout function to use instead of
__mei_cl_send in cases where timeout is required.
The mei_cl_write has only two callers and there is no need to split
it into two functions.
Signed-off-by: Alexander Usyskin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Update the list of maintainers for the Nitro Enclaves project. Alex
(lexnv@) is not working at Amazon anymore and there will be the same
case for me starting with 2023.
Add a reference to the mailing list of the Nitro Enclaves development
team.
Signed-off-by: Andra Paraschiv <[email protected]>
Acked-by: Alexandru Vasile <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
"MHI Host:
Core:
- Use mhi_soc_reset() API for resetting the modem in case of crash.
- Fixed a race condition between mhi_prepare_channel() and M0 state
transition. This can happen when mhi_prepare_channel() was updating the
read/write pointers and in parallel, the mhi_pm_m0_transition() rings
the doorbell of all channels without checking if it was enabled or not.
Fixed the race by ringing the doorbell only for the enabled channels in
mhi_pm_m0_transition().
pci_generic:
- Added a secondary "AT" port using the OEM reserved channel of Telit FN990
modem.
- Added support for a SDX55 variant modem that exists in the Qualcomm
SC8280XP Compute Reference Design (CRD).
- Added support for a T99W175 variant modem manufactured by HP. The modem
uses the same configuration as of T99W175, but with a different VID:PID.
- Added local definitions for some VIDs (Thales and Quectel).
MAINTAINERS:
- Removed Hemant from MHI MAINTAINERS list since he left Qualcomm and
expressed his wish to not continue doing reviews for MHI patches."
* tag 'mhi-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: Add definition for some VIDs
bus: mhi: host: pci_generic: Add HP variant of T99W175
bus: mhi: host: pci_generic: add support for sc8280xp-crd SDX55 variant
MAINTAINERS: Remove Hemant from MHI bus
bus: mhi: host: pci_generic: Add a secondary AT port to Telit FN990
bus: mhi: host: Fix race between channel preparation and M0 event
bus: mhi: host: Use mhi_soc_reset() API in place of register write
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.2-rc1
Zynq:
- Yang's change Switch to use dev_err_probe() helper
Lattice:
- Ivan's change add support for Lattice Sysconfig FPGA reprogrammer
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <[email protected]>
* tag 'fpga-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
dt-bindings: fpga: document Lattice sysCONFIG FPGA manager
fpga: lattice-sysconfig-spi: add Lattice sysCONFIG FPGA manager
fpga: zynq: Switch to use dev_err_probe() helper
|
|
We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing/probes fixes from Steven Rostedt:
- Fix possible NULL pointer dereference on trace_event_file in
kprobe_event_gen_test_exit()
- Fix NULL pointer dereference for trace_array in
kprobe_event_gen_test_exit()
- Fix memory leak of filter string for eprobes
- Fix a possible memory leak in rethook_alloc()
- Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case which
can cause a possible use-after-free
- Fix warning in eprobe filter creation
- Fix eprobe filter creation as it picked the wrong event for the
fields
* tag 'trace-probes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobe: Fix eprobe filter to make a filter correctly
tracing/eprobe: Fix warning in filter creation
kprobes: Skip clearing aggrprobe's post_handler in kprobe-on-ftrace case
rethook: fix a potential memleak in rethook_alloc()
tracing/eprobe: Fix memory leak of filter string
tracing: kprobe: Fix potential null-ptr-deref on trace_array in kprobe_event_gen_test_exit()
tracing: kprobe: Fix potential null-ptr-deref on trace_event_file in kprobe_event_gen_test_exit()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix polling to block on watermark like the reads do, as user space
applications get confused when the select says read is available, and
then the read blocks
- Fix accounting of ring buffer dropped pages as it is what is used to
determine if the buffer is empty or not
- Fix memory leak in tracing_read_pipe()
- Fix struct trace_array warning about being declared in parameters
- Fix accounting of ftrace pages used in output at start up.
- Fix allocation of dyn_ftrace pages by subtracting one from order
instead of diving it by 2
- Static analyzer found a case were a pointer being used outside of a
NULL check (rb_head_page_deactivate())
- Fix possible NULL pointer dereference if kstrdup() fails in
ftrace_add_mod()
- Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
- Fix bad pointer dereference in register_synth_event() on error path
- Remove unused __bad_type_size() method
- Fix possible NULL pointer dereference of entry in list 'tr->err_log'
- Fix NULL pointer deference race if eprobe is called before the event
setup
* tag 'trace-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix race where eprobes can be called before the event
tracing: Fix potential null-pointer-access of entry in list 'tr->err_log'
tracing: Remove unused __bad_type_size() method
tracing: Fix wild-memory-access in register_synth_event()
tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
ftrace: Fix null pointer dereference in ftrace_add_mod()
ring_buffer: Do not deactivate non-existant pages
ftrace: Optimize the allocation for mcount entries
ftrace: Fix the possible incorrect kernel message
tracing: Fix warning on variable 'struct trace_array'
tracing: Fix memory leak in tracing_read_pipe()
ring-buffer: Include dropped pages in counting dirty patches
tracing/ring-buffer: Have polling block on watermark
|
|
The flag that tells the event to call its triggers after reading the event
is set for eprobes after the eprobe is enabled. This leads to a race where
the eprobe may be triggered at the beginning of the event where the record
information is NULL. The eprobe then dereferences the NULL record causing
a NULL kernel pointer bug.
Test for a NULL record to keep this from happening.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]/
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Linux Trace Kernel <[email protected]>
Cc: Tzvetomir Stoyanov <[email protected]>
Cc: Tom Zanussi <[email protected]>
Cc: [email protected]
Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Reported-by: Rafael Mendonca <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Do not hold fpregs lock when inheriting FPU permissions because the
fpregs lock disables preemption on RT but fpu_inherit_perms() does
spin_lock_irq(), which, on RT, uses rtmutexes and they need to be
preemptible.
- Check the page offset and the length of the data supplied by
userspace for overflow when specifying a set of pages to add to an
SGX enclave
* tag 'x86_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Drop fpregs lock before inheriting FPU permissions
x86/sgx: Add overflow check in sgx_validate_offset_length()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix a small race on the task's exit path where there's a
misunderstanding whether the task holds rq->lock or not
- Prevent processes from getting killed when using deprecated or
unknown rseq ABI flags in order to be able to fuzz the rseq() syscall
with syzkaller
* tag 'sched_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix race in task_call_func()
rseq: Use pr_warn_once() when deprecated/unknown ABI flags are encountered
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix an intel PT erratum where CPUs do not support single range output
for more than 4K
- Fix a NULL ptr dereference which can happen after an NMI interferes
with the event enabling dance in amd_pmu_enable_all()
- Free the events array too when freeing uncore contexts on CPU online,
thereby fixing a memory leak
- Improve the pending SIGTRAP check
* tag 'perf_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/pt: Fix sampling using single range output
perf/x86/amd: Fix crash due to race between amd_pmu_enable_all, perf NMI and throttling
perf/x86/amd/uncore: Fix memory leak for events array
perf: Improve missing SIGTRAP checking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix a build error with clang 11
* tag 'locking_urgent_for_v6.1_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Fix qspinlock/x86 inline asm error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix writable sections being moved into the rodata region.
Thanks to Nicholas Piggin and Christophe Leroy.
* tag 'powerpc-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix writable sections being moved into the rodata region
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small fixes, all in drivers.
Most of these are error leg freeing issues, with the only really user
visible one being the zfcp fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix possible memory leak when device_register() failed
scsi: zfcp: Fix double free of FSF request when qdio send fails
scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()
scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()
scsi: mpi3mr: Suppress command reply debug prints
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Preset accessed bits in Intel VT-d page-directory entries to avoid
hardware error
- Set supervisor bit only when Intel IOMMU has the SRS capability
* tag 'iommu-fixes-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Set SRE bit only when hardware has SRS cap
iommu/vt-d: Preset Access bit for IOVA in FL non-leaf paging entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Update MAINTAINERS with Nathan and Nicolas as new Kbuild reviewers
- Increment the debian revision for deb-pkg builds
* tag 'kbuild-fixes-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Restore .version auto-increment behaviour for Debian packages
MAINTAINERS: Add linux-kbuild's patchwork
MAINTAINERS: Remove Michal Marek from Kbuild maintainers
MAINTAINERS: Add Nathan and Nicolas to Kbuild reviewers
|
|
Pull cifs fixes from Steve French:
- two missing and one incorrect return value checks
- fix leak on tlink mount failure
* tag '6.1-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: add check for returning value of SMB2_set_info_init
cifs: Fix wrong return value checking when GETFLAGS
cifs: add check for returning value of SMB2_close_init
cifs: Fix connections leak when tlink setup failed
|
|
SRS cap is the hardware cap telling if the hardware IOMMU can support
requests seeking supervisor privilege or not. SRE bit in scalable-mode
PASID table entry is treated as Reserved(0) for implementation not
supporting SRS cap.
Checking SRS cap before setting SRE bit can avoid the non-recoverable
fault of "Non-zero reserved field set in PASID Table Entry" caused by
setting SRE bit while there is no SRS cap support. The fault messages
look like below:
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [00:0d.0] fault addr 0x1154e1000
[fault reason 0x5a]
SM: Non-zero reserved field set in PASID Table Entry
Fixes: 6f7db75e1c46 ("iommu/vt-d: Add second level page table interface")
Cc: [email protected]
Signed-off-by: Tina Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
The A/D bits are preseted for IOVA over first level(FL) usage for both
kernel DMA (i.e, domain typs is IOMMU_DOMAIN_DMA) and user space DMA
usage (i.e., domain type is IOMMU_DOMAIN_UNMANAGED).
Presetting A bit in FL requires to preset the bit in every related paging
entries, including the non-leaf ones. Otherwise, hardware may treat this
as an error. For example, in a case of ECAP_REG.SMPWC==0, DMA faults might
occur with below DMAR fault messages (wrapped for line length) dumped.
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [aa:00.0] fault addr 0x10c3a6000
[fault reason 0x90]
SM: A/D bit update needed in first-level entry when set up in no snoop
Fixes: 289b3b005cb9 ("iommu/vt-d: Preset A/D bits for user space DMA usage")
Cc: [email protected]
Signed-off-by: Tina Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for 8042 to stop leaking platform device on unload
- a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we
need to reset controller to load config from firmware
- a workaround for Acer Switch to avoid interrupt storm from home and
power buttons
- a workaround for more ASUS ZenBook models to detect keyboard
controller
- a fix for iforce driver to properly handle communication errors
- touchpad on HP Laptop 15-da3001TU switched to RMI mode
* tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - fix leaking of platform device on module removal
Input: i8042 - apply probe defer to more ASUS ZenBook models
Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[]
Input: soc_button_array - add use_low_level_irq module parameter
Input: iforce - invert valid length check when fetching device IDs
Input: goodix - try resetting the controller when no config is set
dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip
Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
- Fix the IO error recovery path for failures happening in the last
zone of device, and that zone is a "runt" zone (smaller than the
other zone). The current code was failing to properly obtain a zone
report in that case.
- Remove the unused to_attr() function as it is unused, causing
compilation warnings with clang.
* tag 'zonefs-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Remove to_attr() helper function
zonefs: fix zone report size in __zonefs_io_error()
|
|
Avoid resetting the module-wide i8042_platform_device pointer in
i8042_probe() or i8042_remove(), so that the device can be properly
destroyed by i8042_exit() on module unload.
Fixes: 9222ba68c3f4 ("Input: i8042 - add deferred probe support")
Signed-off-by: Chen Jun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Pull io_uring fixes from Jens Axboe:
"This is mostly fixing issues around the poll rework, but also two
tweaks for the multishot handling for accept and receive.
All stable material"
* tag 'io_uring-6.1-2022-11-18' of git://git.kernel.dk/linux:
io_uring: disallow self-propelled ring polling
io_uring: fix multishot recv request leaks
io_uring: fix multishot accept request leaks
io_uring: fix tw losing poll events
io_uring: update res mask in io_poll_check_events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix a build error with CONFIG_CFI_CLANG + CONFIG_FTRACE when
CONFIG_FUNCTION_GRAPH_TRACER is not enabled.
- Fix a BUG_ON triggered by the page table checker due to incorrect
file_map_count for non-leaf pmd/pud (the arm64
pmd_user_accessible_page() not checking whether it's a leaf entry).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/mm: fix incorrect file_map_count for non-leaf pmd/pud
arm64: ftrace: Define ftrace_stub_graph only with FUNCTION_GRAPH_TRACER
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira)
- Memory leak fix in nvmet (Sagi Grimberg)
- Regression fix for block cgroups pinning the wrong blkcg, causing
leaks of cgroups and blkcgs (Chris)
- UAF fix for drbd setup error handling (Dan)
- Fix DMA alignment propagation in DM (Keith)
* tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux:
dm-log-writes: set dma_alignment limit in io_hints
dm-integrity: set dma_alignment limit in io_hints
block: make blk_set_default_limits() private
dm-crypt: provide dma_alignment limit in io_hints
block: make dma_alignment a stacking queue_limit
nvmet: fix a memory leak in nvmet_auth_set_key
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000
drbd: use after free in drbd_create_device()
nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro
blk-cgroup: properly pin the parent in blkcg_css_online
|
|
Pull drm fixes from Dave Airlie:
"I guess the main question is are things settling down, and I'd say
kinda, these are all pretty small fixes, nothing big stands out
really, just seems to be quite a few of them.
Mostly amdgpu and core fixes, with some i915, tegra, vc4, panel bits.
core:
- Fix potential memory leak in drm_dev_init()
- Fix potential null-ptr-deref in drm_vblank_destroy_worker()
- Revert hiding unregistered connectors from userspace, as it breaks
on DP-MST
- Add workaround for DP++ dual mode adaptors that don't support i2c
subaddressing
i915:
- Fix uaf with lmem_userfault_list handling
amdgpu:
- gang submit fixes
- Fix a possible memory leak in ganng submit error path
- DP tunneling fixes
- DCN 3.1 page flip fix
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- Don't expose degamma on hardware that doesn't support it
- BACO fixes for SMU 11.x
- BACO fixes for SMU 13.x
- Virtual display fix for devices with no display hardware
amdkfd:
- Memory limit regression fix
tegra:
- tegra20 GART fix
vc4:
- Fix error handling in vc4_atomic_commit_tail()
lima:
- Set lima's clkname corrrectly when regulator is missing
panel:
- Set bpc for logictechno panels"
* tag 'drm-fixes-2022-11-19' of git://anongit.freedesktop.org/drm/drm: (28 commits)
gpu: host1x: Avoid trying to use GART on Tegra20
drm/display: Don't assume dual mode adaptors support i2c sub-addressing
drm/amd/pm: fix SMU13 runpm hang due to unintentional workaround
drm/amd/pm: enable runpm support over BACO for SMU13.0.7
drm/amd/pm: enable runpm support over BACO for SMU13.0.0
drm/amdgpu: there is no vbios fb on devices with no display hw (v2)
drm/amdkfd: Fix a memory limit issue
drm/amdgpu: disable BACO support on more cards
drm/amd/display: don't enable DRM CRTC degamma property for DCE
drm/amd/display: Set max for prefetch lines on dcn32
drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32
drm/amd/display: Fix prefetch calculations for dcn32
drm/amd/display: Fix optc2_configure warning on dcn314
drm/amd/display: Fix calculation for cursor CAB allocation
Revert "drm: hide unregistered connectors from GETCONNECTOR IOCTL"
drm/amd/display: Support parsing VRAM info v3.0 from VBIOS
drm/amd/display: Fix invalid DPIA AUX reply causing system hang
drm/amdgpu: Add psp_13_0_10_ta firmware to modinfo
drm/amd/display: Add HUBP surface flip interrupt handler
drm/amd/display: Fix access timeout to DPIA AUX at boot time
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix deadlock in discontiguous saved segments (DCSS) block device
driver. When adding a disk and scanning partitions the scan would not
break out early without a missed flag.
- Avoid using global register variable for current_stack_pointer due to
an old bug in gcc versions prior to gcc-8.4. Due to this bug a broken
code is generated, which leads to stack corruptions.
* tag 's390-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: avoid using global register for current_stack_pointer
s390/dcssblk: fix deadlock when adding a DCSS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix misbehavior if list_versions DM ioctl races with module loading
- Fix missing decrement of no_sleep_enabled if dm_bufio_client_create
failed
- Allow DM integrity devices to be activated in read-only mode
* tag 'for-6.1/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: clear the journal on suspend
dm integrity: flush the journal on suspend
dm bufio: Fix missing decrement of no_sleep_enabled if dm_bufio_client_create failed
dm ioctl: fix misbehavior if list_versions races with module loading
|