aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-04-03Merge tag 'pci-v5.7-changes' of ↵Linus Torvalds88-1631/+4832
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...
2020-04-03Merge branch 'arm/late' into arm/dtArnd Bergmann63-2195/+4655
Include originally "late" updates for OMAP and Qualcomm, now that it's not late any more. * arm/late: (122 commits) ARM: OMAP2+: Drop legacy platform data for ti81xx edma ARM: dts: Configure interconnect target module for ti816x edma ARM: dts: Configure interconnect target module for dm814x tptc3 ARM: dts: Configure interconnect target module for dm814x tptc2 ARM: dts: Configure interconnect target module for dm814x tptc1 ARM: dts: Configure interconnect target module for dm814x tptc0 ARM: dts: Configure interconnect target module for dm814x tpcc ARM: OMAP2+: Drop legacy platform data for dm814x cpsw ARM: dts: Configure interconnect target module for dm814x cpsw clk: ti: Fix dm814x clkctrl for ethernet arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware arm64: dts: sdm845: add IPA information arm64: dts: qcom: db845c: add analog audio support arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s arm64: dts: qcom: c630: Enable audio support arm64: dts: qcom: sdm845: add apr nodes arm64: dts: qcom: sdm845: add slimbus nodes arm64: dts: qcom: sc7180: Update reg names for SDHC arm64: dts: qcom: qcs404: Enable CQE support for eMMC arm64: dts: msm8916: Add fastrpc node ...
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds171-4012/+16141
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds245-24/+245
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-04-03Merge tag 'for-linus-5.7-rc1-tag' of ↵Linus Torvalds6-99/+65
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - a cleanup patch removing an unused function - a small fix for the xen pciback driver - a series for making the unwinder hyppay with the Xen PV guest idle task stacks * tag 'for-linus-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: Make the secondary CPU idle tasks reliable x86/xen: Make the boot CPU idle task reliable xen-pciback: fix INTERRUPT_TYPE_* defines xen/xenbus: remove unused xenbus_map_ring()
2020-04-03Merge branch 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds2-10/+6
Pull workqueue updates from Tejun Heo: "Nothing too interesting. Just two trivial patches" * 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Mark up unlocked access to wq->first_flusher workqueue: Make workqueue_init*() return void
2020-04-03Merge branch 'for-5.7' of ↵Linus Torvalds21-148/+795
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - Christian extended clone3 so that processes can be spawned into cgroups directly. This is not only neat in terms of semantics but also avoids grabbing the global cgroup_threadgroup_rwsem for migration. - Daniel added !root xattr support to cgroupfs. Userland already uses xattrs on cgroupfs for bookkeeping. This will allow delegated cgroups to support such usages. - Prateek tried to make cpuset hotplug handling synchronous but that led to possible deadlock scenarios. Reverted. - Other minor changes including release_agent_path handling cleanup. * 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: docs: cgroup-v1: Document the cpuset_v2_mode mount option Revert "cpuset: Make cpuset hotplug synchronous" cgroupfs: Support user xattrs kernfs: Add option to enable user xattrs kernfs: Add removed_size out param for simple_xattr_set kernfs: kvmalloc xattr value instead of kmalloc cgroup: Restructure release_agent_path handling selftests/cgroup: add tests for cloning into cgroups clone3: allow spawning processes into cgroups cgroup: add cgroup_may_write() helper cgroup: refactor fork helpers cgroup: add cgroup_get_from_file() helper cgroup: unify attach permission checking cpuset: Make cpuset hotplug synchronous cgroup.c: Use built-in RCU list checking kselftest/cgroup: add cgroup destruction test cgroup: Clean up css_set task traversal
2020-04-03Merge tag 'kgdb-5.7-rc1' of ↵Linus Torvalds1-8/+12
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb updates from Daniel Thompson: "Pretty quiet this cycle. Just a couple of small fixes from myself both of which were reviewed by Doug Anderson to keep me honest (thanks)" * tag 'kgdb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: Censor attempts to set PROMPT without ENABLE_MEM_READ kdb: Eliminate strncpy() warnings by replacing with strscpy()
2020-04-03Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds9-111/+88
Pull ARM updates from Russell King: - replace setup_irq() with request_irq() for ebsa110, footbridge, rpc - fix clang assembly error in kexec code - remove .fixup section in boot stub - decompressor / EFI cache flushing updates * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8966/1: rpc: replace setup_irq() by request_irq() ARM: 8965/2: footbridge: replace setup_irq() by request_irq() ARM: 8964/1: ebsa110: replace setup_irq() by request_irq() ARM: 8962/1: kexec: drop invalid assembly argument ARM: decompressor: switch to by-VA cache maintenance for v7 cores ARM: decompressor: prepare cache_clean_flush for doing by-VA maintenance ARM: decompressor: factor out routine to obtain the inflated image size ARM: 8959/1: Remove unused .fixup section in boot stub ARM: allow unwinder to unwind recursive functions
2020-04-03remoteproc/omap: Fix set_load call in omap_rproc_request_timerNathan Chancellor1-1/+1
When building arm allyesconfig: drivers/remoteproc/omap_remoteproc.c:174:44: error: too many arguments to function call, expected 2, have 3 timer->timer_ops->set_load(timer->odt, 0, 0); ~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ 1 error generated. This is due to commit 02e6d546e3bd ("clocksource/drivers/timer-ti-dm: Enable autoreload in set_pwm") in the clockevents tree interacting with commit e28edc571925 ("remoteproc/omap: Request a timer(s) for remoteproc usage") from the rpmsg tree. This should have been fixed during the merge of the remoteproc tree since it happened after the clockevents tree merge; however, it does not look like my email was noticed by either maintainer and I did not pay attention when the pull was sent since I was on CC. Fixes: c6570114316f ("Merge tag 'rproc-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc") Link: https://lore.kernel.org/lkml/20200327185055.GA22438@ubuntu-m2-xlarge-x86/ Signed-off-by: Nathan Chancellor <[email protected]> Acked-by: Suman Anna <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-04-03dm integrity: fix logic bug in integrity tag testingMikulas Patocka1-1/+1
If all the bytes are equal to DISCARD_FILLER, we want to accept the buffer. If any of the bytes are different, we must do thorough tag-by-tag checking. The condition was inverted. Fixes: 84597a44a9d8 ("dm integrity: add optional discard support") Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-04-03docs: cgroup-v1: Document the cpuset_v2_mode mount optionWaiman Long2-2/+17
The cpuset in cgroup v1 accepts a special "cpuset_v2_mode" mount option that make cpuset.cpus and cpuset.mems behave more like those in cgroup v2. Document it to make other people more aware of this feature that can be useful in some circumstances. Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2020-04-03Revert "dm: always call blk_queue_split() in dm_process_bio()"Mike Snitzer1-2/+3
This reverts commit effd58c95f277744f75d6e08819ac859dbcbd351. blk_queue_split() is causing excessive IO splitting -- because blk_max_size_offset() depends on 'chunk_sectors' limit being set and if it isn't (as is the case for DM targets!) it falls back to splitting on a 'max_sectors' boundary regardless of offset. "Fix" this by reverting back to _not_ using blk_queue_split() in dm_process_bio() for normal IO (reads and writes). Long-term fix is still TBD but it should focus on training blk_max_size_offset() to call into a DM provided hook (to call DM's max_io_len()). Test results from simple misaligned IO test on 4-way dm-striped device with chunksize of 128K and stripesize of 512K: xfs_io -d -c 'pread -b 2m 224s 4072s' /dev/mapper/stripe_dev before this revert: 253,0 21 1 0.000000000 2206 Q R 224 + 4072 [xfs_io] 253,0 21 2 0.000008267 2206 X R 224 / 480 [xfs_io] 253,0 21 3 0.000010530 2206 X R 224 / 256 [xfs_io] 253,0 21 4 0.000027022 2206 X R 480 / 736 [xfs_io] 253,0 21 5 0.000028751 2206 X R 480 / 512 [xfs_io] 253,0 21 6 0.000033323 2206 X R 736 / 992 [xfs_io] 253,0 21 7 0.000035130 2206 X R 736 / 768 [xfs_io] 253,0 21 8 0.000039146 2206 X R 992 / 1248 [xfs_io] 253,0 21 9 0.000040734 2206 X R 992 / 1024 [xfs_io] 253,0 21 10 0.000044694 2206 X R 1248 / 1504 [xfs_io] 253,0 21 11 0.000046422 2206 X R 1248 / 1280 [xfs_io] 253,0 21 12 0.000050376 2206 X R 1504 / 1760 [xfs_io] 253,0 21 13 0.000051974 2206 X R 1504 / 1536 [xfs_io] 253,0 21 14 0.000055881 2206 X R 1760 / 2016 [xfs_io] 253,0 21 15 0.000057462 2206 X R 1760 / 1792 [xfs_io] 253,0 21 16 0.000060999 2206 X R 2016 / 2272 [xfs_io] 253,0 21 17 0.000062489 2206 X R 2016 / 2048 [xfs_io] 253,0 21 18 0.000066133 2206 X R 2272 / 2528 [xfs_io] 253,0 21 19 0.000067507 2206 X R 2272 / 2304 [xfs_io] 253,0 21 20 0.000071136 2206 X R 2528 / 2784 [xfs_io] 253,0 21 21 0.000072764 2206 X R 2528 / 2560 [xfs_io] 253,0 21 22 0.000076185 2206 X R 2784 / 3040 [xfs_io] 253,0 21 23 0.000077486 2206 X R 2784 / 2816 [xfs_io] 253,0 21 24 0.000080885 2206 X R 3040 / 3296 [xfs_io] 253,0 21 25 0.000082316 2206 X R 3040 / 3072 [xfs_io] 253,0 21 26 0.000085788 2206 X R 3296 / 3552 [xfs_io] 253,0 21 27 0.000087096 2206 X R 3296 / 3328 [xfs_io] 253,0 21 28 0.000093469 2206 X R 3552 / 3808 [xfs_io] 253,0 21 29 0.000095186 2206 X R 3552 / 3584 [xfs_io] 253,0 21 30 0.000099228 2206 X R 3808 / 4064 [xfs_io] 253,0 21 31 0.000101062 2206 X R 3808 / 3840 [xfs_io] 253,0 21 32 0.000104956 2206 X R 4064 / 4096 [xfs_io] 253,0 21 33 0.001138823 0 C R 4096 + 200 [0] after this revert: 253,0 18 1 0.000000000 4430 Q R 224 + 3896 [xfs_io] 253,0 18 2 0.000018359 4430 X R 224 / 256 [xfs_io] 253,0 18 3 0.000028898 4430 X R 256 / 512 [xfs_io] 253,0 18 4 0.000033535 4430 X R 512 / 768 [xfs_io] 253,0 18 5 0.000065684 4430 X R 768 / 1024 [xfs_io] 253,0 18 6 0.000091695 4430 X R 1024 / 1280 [xfs_io] 253,0 18 7 0.000098494 4430 X R 1280 / 1536 [xfs_io] 253,0 18 8 0.000114069 4430 X R 1536 / 1792 [xfs_io] 253,0 18 9 0.000129483 4430 X R 1792 / 2048 [xfs_io] 253,0 18 10 0.000136759 4430 X R 2048 / 2304 [xfs_io] 253,0 18 11 0.000152412 4430 X R 2304 / 2560 [xfs_io] 253,0 18 12 0.000160758 4430 X R 2560 / 2816 [xfs_io] 253,0 18 13 0.000183385 4430 X R 2816 / 3072 [xfs_io] 253,0 18 14 0.000190797 4430 X R 3072 / 3328 [xfs_io] 253,0 18 15 0.000197667 4430 X R 3328 / 3584 [xfs_io] 253,0 18 16 0.000218751 4430 X R 3584 / 3840 [xfs_io] 253,0 18 17 0.000226005 4430 X R 3840 / 4096 [xfs_io] 253,0 18 18 0.000250404 4430 Q R 4120 + 176 [xfs_io] 253,0 18 19 0.000847708 0 C R 4096 + 24 [0] 253,0 18 20 0.000855783 0 C R 4120 + 176 [0] Fixes: effd58c95f27774 ("dm: always call blk_queue_split() in dm_process_bio()") Cc: [email protected] Reported-by: Andreas Gruenbacher <[email protected]> Tested-by: Barry Marson <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-04-03Revert "cpuset: Make cpuset hotplug synchronous"Tejun Heo3-19/+17
This reverts commit a49e4629b5ed ("cpuset: Make cpuset hotplug synchronous") as it may deadlock with cpu hotplug path. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Tejun Heo <[email protected]> Reported-by: Qian Cai <[email protected]> Cc: Prateek Sood <[email protected]>
2020-04-03tracing: Do not allocate buffer in trace_find_next_entry() in atomicSteven Rostedt (VMware)1-1/+20
When dumping out the trace data in latency format, a check is made to peek at the next event to compare its timestamp to the current one, and if the delta is of a greater size, it will add a marker showing so. But to do this, it needs to save the current event otherwise peeking at the next event will remove the current event. To save the event, a temp buffer is used, and if the event is bigger than the temp buffer, the temp buffer is freed and a bigger buffer is allocated. This allocation is a problem when called in atomic context. The only way this gets called via atomic context is via ftrace_dump(). Thus, use a static buffer of 128 bytes (which covers most events), and if the event is bigger than that, simply return NULL. The callers of trace_find_next_entry() need to handle a NULL case, as that's what would happen if the allocation failed. Link: https://lore.kernel.org/r/20200326091256.GR11705@shao2-debian Fixes: ff895103a84ab ("tracing: Save off entry when peeking at next entry") Reported-by: kernel test robot <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-04-03dm integrity: fix ppc64le warningMike Snitzer1-1/+1
Otherwise: In file included from drivers/md/dm-integrity.c:13: drivers/md/dm-integrity.c: In function 'dm_integrity_status': drivers/md/dm-integrity.c:3061:10: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'long int' [-Werror=format=] DMEMIT("%llu %llu", ^~~~~~~~~~~ atomic64_read(&ic->number_of_mismatches), ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/device-mapper.h:550:46: note: in definition of macro 'DMEMIT' 0 : scnprintf(result + sz, maxlen - sz, x)) ^ cc1: all warnings being treated as errors Fixes: 7649194a1636ab5 ("dm integrity: remove sector type casts") Signed-off-by: Mike Snitzer <[email protected]>
2020-04-03perf python: Fix clang detection to strip out options passed in $CCArnaldo Carvalho de Melo1-1/+1
The clang check in the python setup.py file expected $CC to be just the name of the compiler, not the compiler + options, i.e. all options were expected to be passed in $CFLAGS, this ends up making it fail in systems where CC is set to, e.g.: "aarch64-linaro-linux-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot" Like this: $ python3 >>> from subprocess import Popen >>> a = Popen(["aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot", "-v"]) Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/lib/python3.6/subprocess.py", line 729, in __init__ restore_signals, start_new_session) File "/usr/lib/python3.6/subprocess.py", line 1364, in _execute_child raise child_exception_type(errno_num, err_msg, err_filename) FileNotFoundError: [Errno 2] No such file or directory: 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot': 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot' >>> Make it more robust, covering this case, by passing cc.split()[0] as the first arg to popen(). Fixes: a7ffd416d804 ("perf python: Fix clang detection when using CC=clang-version") Reported-by: Daniel Díaz <[email protected]> Reported-by: Naresh Kamboju <[email protected]> Tested-by: Daniel Díaz <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ilie Halip <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf tools: Support Python 3.8+ in MakefileSam Lunt1-1/+10
Python 3.8 changed the output of 'python-config --ldflags' to no longer include the '-lpythonX.Y' flag (this apparently fixed an issue loading modules with a statically linked Python executable). The libpython feature check in linux/build/feature fails if the Python library is not included in FEATURE_CHECK_LDFLAGS-libpython variable. This adds a check in the Makefile to determine if PYTHON_CONFIG accepts the '--embed' flag and passes that flag alongside '--ldflags' if so. tools/perf is the only place the libpython feature check is used. Signed-off-by: Sam Lunt <[email protected]> Tested-by: He Zhe <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf script: Fix invalid read of directory entry after closedir()Andreas Gerstmayr1-1/+1
closedir(lang_dir) frees the memory of script_dirent->d_name, which gets accessed in the next line in a call to scnprintf(). Valgrind report: Invalid read of size 1 ==413557== at 0x483CBE6: strlen (vg_replace_strmem.c:461) ==413557== by 0x4DD45FD: __vfprintf_internal (vfprintf-internal.c:1688) ==413557== by 0x4DE6679: __vsnprintf_internal (vsnprintf.c:114) ==413557== by 0x53A037: vsnprintf (stdio2.h:80) ==413557== by 0x53A037: scnprintf (vsprintf.c:21) ==413557== by 0x435202: get_script_path (builtin-script.c:3223) ==413557== Address 0x52e7313 is 1,139 bytes inside a block of size 32,816 free'd ==413557== at 0x483AA0C: free (vg_replace_malloc.c:540) ==413557== by 0x4E303C0: closedir (closedir.c:50) ==413557== by 0x4351DC: get_script_path (builtin-script.c:3222) Signed-off-by: Andreas Gerstmayr <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf script report: Fix SEGFAULT when using DWARF modeAndreas Gerstmayr1-0/+3
When running perf script report with a Python script and a callgraph in DWARF mode, intr_regs->regs can be 0 and therefore crashing the regs_map function. Added a check for this condition (same check as in builtin-script.c:595). Signed-off-by: Andreas Gerstmayr <[email protected]> Tested-by: Kim Phillips <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf script: add -S/--symbols documentationIan Rogers1-0/+8
Capture both that this option exists and that symbols can be hexadecimal addresses. Signed-off-by: Ian Rogers <[email protected]> Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metricJin Yao12-12/+12
The kernel utilization metric does multiplexing currently and is somewhat unreliable. The problem is that it uses two instances of the fixed counter, and the kernel has to multipleplex which causes errors. So should use CPU_CLK_UNHALTED.THREAD instead. Before: # perf stat -M Kernel_Utilization -- sleep 1 Performance counter stats for 'sleep 1': 1,419,425 cpu_clk_unhalted.ref_tsc:k <not counted> cpu_clk_unhalted.ref_tsc (0.00%) After: # perf stat -M Kernel_Utilization -- sleep 1 Performance counter stats for 'sleep 1': 746,688 cpu_clk_unhalted.thread:k # 0.7 Kernel_Utilization 1,088,348 cpu_clk_unhalted.thread Signed-off-by: Jin Yao <[email protected]> Reviewed-by: Andi Kleen <[email protected]> Reviewed-by: Kan Liang <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf events parser: Add missing Intel CPU events to parserAdrian Hunter1-5/+7
perf list expects CPU events to be parseable by name, e.g. # perf list | grep el-capacity-read el-capacity-read OR cpu/el-capacity-read/ [Kernel PMU event] But the event parser does not recognize them that way, e.g. # perf test -v "Parse event" <SNIP> running test 54 'cycles//u' running test 55 'cycles:k' running test 0 'cpu/config=10,config1,config2=3,period=1000/u' running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u' running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/' running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp' -> cpu/event=0,umask=0x11/ -> cpu/event=0,umask=0x13/ -> cpu/event=0x54,umask=0x1/ failed to parse event 'el-capacity-read:u,cpu/event=el-capacity-read/u', err 1, str 'parser error' event syntax error: 'el-capacity-read:u,cpu/event=el-capacity-read/u' \___ parser error test child finished with 1 ---- end ---- Parse event definition strings: FAILED! This happens because the parser splits names by '-' in order to deal with cache events. For example 'L1-dcache' is a token in parse-events.l which is matched to 'L1-dcache-load-miss' by the following rule: PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT opt_event_config And so there is special handling for 2-part PMU names i.e. PE_PMU_EVENT_PRE '-' PE_PMU_EVENT_SUF sep_dc but no handling for 3-part names, which are instead added as tokens e.g. topdown-[a-z-]+ While it would be possible to add a rule for 3-part names, that would not work if the first parts were also a valid PMU name e.g. 'el-capacity-read' would be matched to 'el-capacity' before the parser reached the 3rd part. The parser would need significant change to rationalize all this, so instead fix for now by adding missing Intel CPU events with 3-part names to the event parser as tokens. Missing events were found by using: grep -r EVENT_ATTR_STR arch/x86/events/intel/core.c Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf script: Allow --symbol to accept hexadecimal addressesStephane Eranian1-4/+17
This patch extends the perf script --symbols option to filter on hexadecimal addresses in addition to symbol names. This makes it easier to handle cases where symbols are aliased. With this patch, it is possible to mix and match symbols and hexadecimal addresses using the --symbols option. $ perf script --symbols=noploop,0x4007a0 Signed-off-by: Stephane Eranian <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf report/top TUI: Fix title line formattingArnaldo Carvalho de Melo1-4/+4
In d10ec006dcd7 ("perf hists browser: Allow passing an initial hotkey") the hist_entry__title() call was cut'n'pasted to a function where the 'title' variable is a pointer, not an array, so the sizeof(title) continues syntactically valid but ends up reducing the real size of the buffer where to format the first line in the screen to 8 bytes, which makes the formatting at the title at each refresh to produce just the string "Samples ", duh, fix it by passing the size of the buffer. Cc: Adrian Hunter <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Fixes: d10ec006dcd7 ("perf hists browser: Allow passing an initial hotkey") Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf top: Support hotkey to change sort orderJin Yao1-2/+9
It would be nice if we can use a hotkey in perf top browser to select a event for sorting. For example: perf top --group -e cycles,instructions,cache-misses Samples Overhead Shared Object Symbol 40.03% 45.71% 0.03% div [.] main 20.46% 14.67% 0.21% libc-2.27.so [.] __random_r 20.01% 19.54% 0.02% libc-2.27.so [.] __random 9.68% 10.68% 0.00% div [.] compute_flag 4.32% 4.70% 0.00% libc-2.27.so [.] rand 3.84% 3.43% 0.00% div [.] rand@plt 0.05% 0.05% 2.33% libc-2.27.so [.] __strcmp_sse2_unaligned 0.04% 0.08% 2.43% perf [.] perf_hpp__is_dynamic_en 0.04% 0.02% 6.64% perf [.] rb_next 0.04% 0.01% 3.87% perf [.] dso__find_symbol 0.04% 0.04% 1.77% perf [.] sort__dso_cmp When user press hotkey '2' (event index, starting from 0), it indicates to sort output by the third event in group (cache-misses). Samples Overhead Shared Object Symbol 4.07% 1.28% 6.68% perf [.] rb_next 3.57% 3.98% 4.11% perf [.] __hists__insert_output 3.67% 11.24% 3.60% perf [.] perf_hpp__is_dynamic_e 3.67% 3.20% 3.20% perf [.] hpp__sort_overhead 0.81% 0.06% 3.01% perf [.] dso__find_symbol 1.62% 5.47% 2.51% perf [.] hists__match 2.70% 1.86% 2.47% libc-2.27.so [.] _int_malloc 0.19% 0.00% 2.29% [kernel] [k] copy_page 0.41% 0.32% 1.98% perf [.] hists__decay_entries 1.84% 3.67% 1.68% perf [.] sort__dso_cmp 0.16% 0.00% 1.63% [kernel] [k] clear_page_erms Now the output is sorted by cache-misses. v2: --- Zero the history if hotkey is pressed. Signed-off-by: Jin Yao <[email protected]> Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf top: Support --group-sort-idx to change the sort orderJin Yao2-0/+9
'perf report' supports the option --group-sort-idx, which sorts the output by the event at the index n in event group. For example: perf record -e cycles,instructions,cache-misses perf report --group --group-sort-idx 2 --stdio The perf-report output is sorted by cache-misses. This patch supports --group-sort-idx in perf-top. For example: perf top --group -e cycles,instructions,cache-misses --group-sort-idx 2 The perf-top output is sorted by cache-misses. Signed-off-by: Jin Yao <[email protected]> Suggested-by: Arnaldo Carvalho de Melo <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf symbols: Fix arm64 gap between kernel start and module endKemeng Shi2-0/+28
During execution of command 'perf report' in my arm64 virtual machine, this error message is showed: failed to process sample __symbol__inc_addr_samples(860): ENOMEM! sym->name=__this_module, start=0x1477100, addr=0x147dbd8, end=0x80002000, func: 0 The error is caused with path: cmd_report __cmd_report perf_session__process_events __perf_session__process_events ordered_events__flush __ordered_events__flush oe->deliver (ordered_events__deliver_event) perf_session__deliver_event machines__deliver_event perf_evlist__deliver_sample tool->sample (process_sample_event) hist_entry_iter__add iter->add_entry_cb(hist_iter__report_callback) hist_entry__inc_addr_samples symbol__inc_addr_samples __symbol__inc_addr_samples h = annotated_source__histogram(src, evidx) (NULL) annotated_source__histogram failed is caused with path: ... hist_entry__inc_addr_samples symbol__inc_addr_samples symbol__hists annotated_source__alloc_histograms src->histograms = calloc(nr_hists, sizeof_sym_hist) (failed) Calloc failed as the symbol__size(sym) is too huge. As show in error message: start=0x1477100, end=0x80002000, size of symbol is about 2G. This is the same problem as 'perf annotate: Fix s390 gap between kernel end and module start (b9c0a64901d5bd)'. Perf gets symbol information from /proc/kallsyms in __dso__load_kallsyms. A part of symbol in /proc/kallsyms from my virtual machine is as follows: #cat /proc/kallsyms | sort ... ffff000001475080 d rpfilter_mt_reg [ip6t_rpfilter] ffff000001475100 d $d [ip6t_rpfilter] ffff000001475100 d __this_module [ip6t_rpfilter] ffff000080080000 t _head ffff000080080000 T _text ffff000080080040 t pe_header ... Take line 'ffff000001475100 d __this_module [ip6t_rpfilter]' as example. The start and end of symbol are both set to ffff000001475100 in dso__load_all_kallsyms. Then symbols__fixup_end will set the end of symbol to next big address to ffff000001475100 in /proc/kallsyms, ffff000080080000 in this example. Then sizeof of symbol will be about 2G and cause the problem. The start of module in my machine is ffff000000a62000 t $x [dm_mod] The start of kernel in my machine is ffff000080080000 t _head There is a big gap between end of module and begin of kernel if a samll amount of memory is used by module. And the last symbol in module will have a large address range as caotaining the big gap. Give that the module and kernel text segment sequence may change in the future, fix this by limiting range of last symbol in module and kernel to 4K in arch arm64. Signed-off-by: Kemeng Shi <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Hewenliang <[email protected]> Cc: Hu Shiyuan <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Richter <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] [ refreshed the patch on current codebase, added string.h include as strchr() is used ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf build-test: Honour JOBS to override detection of number of coresArnaldo Carvalho de Melo1-3/+7
When one does: $ make -C tools/perf build-test The makefile in tools/perf/tests/ will, just like the main one, detect how many cores are in the system and use it with -j. Sometimes we may need to override that, for instance, when using icecream or distcc to use multiple machines in the build process, then we need to, as with the main makefile, use: $ make JOBS=N -C tools/perf build-test Fix the tests makefile to honour that. Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf script: Add --show-cgroup-events optionNamhyung Kim2-0/+44
The --show-cgroup-events option is to print CGROUP events in the output like others. Committer testing: [root@seventh ~]# perf record --all-cgroups --namespaces /wb/cgtest [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.039 MB perf.data (487 samples) ] [root@seventh ~]# perf script --show-cgroup-events | grep PERF_RECORD_CGROUP -B2 -A2 swapper 0 0.000000: PERF_RECORD_CGROUP cgroup: 1 / perf 12145 11200.440730: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) perf 12145 11200.440733: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) -- cgtest 12145 11200.440739: 193472 cycles: ffffffffb90f6fbc commit_creds+0x1fc (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) cgtest 12145 11200.440790: 2691608 cycles: 7fa2cb43019b _dl_sysdep_start+0x7cb (/usr/lib64/ld-2.29.so) cgtest 12145 11200.440962: PERF_RECORD_CGROUP cgroup: 83 /sub cgtest 12147 11200.441054: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) cgtest 12147 11200.441057: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) -- cgtest 12148 11200.441103: 10227 cycles: ffffffffb9a0153d end_repeat_nmi+0x48 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) cgtest 12148 11200.441106: 273295 cycles: ffffffffb99ecbc7 copy_page+0x7 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) cgtest 12147 11200.441133: PERF_RECORD_CGROUP cgroup: 88 /sub/cgrp1 cgtest 12147 11200.441143: 2788845 cycles: ffffffffb94676c2 security_genfs_sid+0x102 (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) cgtest 12148 11200.441162: PERF_RECORD_CGROUP cgroup: 93 /sub/cgrp2 cgtest 12148 11200.441182: 2669546 cycles: 401020 _init+0x20 (/wb/cgtest) cgtest 12149 11200.441247: 1 cycles: ffffffffb900d58b __intel_pmu_enable_all.constprop.0+0x3b (/lib/modules/5.6.0-rc6-00008-gfe2413eefd7f/build/vmlinux) [root@seventh ~]# Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf top: Add --all-cgroups optionNamhyung Kim2-0/+19
The --all-cgroups option is to enable cgroup profiling support. It tells kernel to record CGROUP events in the ring buffer so that 'perf top' can identify task/cgroup association later. Committer testing: Use: # perf top --all-cgroups -s cgroup_id,cgroup,pid Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Link: http://lore.kernel.org/lkml/[email protected] [ Extracted the HAVE_FILE_HANDLE from the followup patch ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf record: Add --all-cgroups optionNamhyung Kim5-2/+27
The --all-cgroups option is to enable cgroup profiling support. It tells kernel to record CGROUP events in the ring buffer so that perf report can identify task/cgroup association later. [root@seventh ~]# perf record --all-cgroups --namespaces /wb/cgtest [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.042 MB perf.data (558 samples) ] [root@seventh ~]# perf report --stdio -s cgroup_id,cgroup,pid # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 558 of event 'cycles' # Event count (approx.): 458017341 # # Overhead cgroup id (dev/inode) Cgroup Pid:Command # ........ ..................... .......... ............... # 33.15% 4/0xeffffffb /sub 9615:looper0 32.83% 4/0xf00002f5 /sub/cgrp2 9620:looper2 32.79% 4/0xf00002f4 /sub/cgrp1 9619:looper1 0.35% 4/0xf00002f5 /sub/cgrp2 9618:cgtest 0.34% 4/0xf00002f4 /sub/cgrp1 9617:cgtest 0.32% 4/0xeffffffb / 9615:looper0 0.11% 4/0xeffffffb /sub 9617:cgtest 0.10% 4/0xeffffffb /sub 9618:cgtest # # (Tip: Sample related events with: perf record -e '{cycles,instructions}:S') # [root@seventh ~]# Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Link: http://lore.kernel.org/lkml/[email protected] [ Extracted the HAVE_FILE_HANDLE from the followup patch ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf record: Support synthesizing cgroup eventsNamhyung Kim4-0/+129
Synthesize cgroup events by iterating cgroup filesystem directories. The cgroup event only saves the portion of cgroup path after the mount point and the cgroup id (which actually is a file handle). Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Link: http://lore.kernel.org/lkml/[email protected] [ Extracted the HAVE_FILE_HANDLE from the followup patch, added missing __maybe_unused ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf report: Add 'cgroup' sort keyNamhyung Kim5-0/+54
The cgroup sort key is to show cgroup membership of each task. Currently it shows full path in the cgroupfs (not relative to the root of cgroup namespace) since it'd be more intuitive IMHO. Otherwise root cgroup in different namespaces will all show same name - "/". The cgroup sort key should come before cgroup_id otherwise sort_dimension__add() will match it to cgroup_id as it only matches with the given substring. For example it will look like following. Note that record patch adding --all-cgroups patch will come later. $ perf record -a --namespace --all-cgroups cgtest [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.208 MB perf.data (4090 samples) ] $ perf report -s cgroup_id,cgroup,pid ... # Overhead cgroup id (dev/inode) Cgroup Pid:Command # ........ ..................... .......... ............... # 93.96% 0/0x0 / 0:swapper 1.25% 3/0xeffffffb / 278:looper0 0.86% 3/0xf000015f /sub/cgrp1 280:cgtest 0.37% 3/0xf0000160 /sub/cgrp2 281:cgtest 0.34% 3/0xf0000163 /sub/cgrp3 282:cgtest 0.22% 3/0xeffffffb /sub 278:looper0 0.20% 3/0xeffffffb / 280:cgtest 0.15% 3/0xf0000163 /sub/cgrp3 285:looper3 Signed-off-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf cgroup: Maintain cgroup hierarchyNamhyung Kim5-5/+109
Each cgroup is kept in the perf_env's cgroup_tree sorted by the cgroup id. Hist entries have cgroup id can compare it directly and later it can be used to find a group name using this tree. Signed-off-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf tools: Basic support for CGROUP eventNamhyung Kim13-1/+74
Implement basic functionality to support cgroup tracking. Each cgroup can be identified by inode number which can be read from userspace too. The actual cgroup processing will come in the later patch. Reported-by: kernel test robot <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> [ fix perf test failure on sampling parsing ] Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf tools: Add file-handle feature testNamhyung Kim4-2/+28
The file handle (FHANDLE) support is configurable so some systems might not have it. So add a config feature item to check it on build time so that we don't add the cgroup tracking feature based on that. Committer notes: Had to make the test use the same construct as its later use in synthetic-events.c, in the next patch in this series. i.e. make it be: struct { struct file_handle fh; uint64_t cgroup_id; } handle; To cope with: CC /tmp/build/perf/util/cloexec.o util/synthetic-events.c:428:22: error: field 'fh' with CC /tmp/build/perf/util/call-path.o variable sized type 'struct file_handle' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end] struct file_handle fh; ^ 1 error generated. Deal with this at some point, i.e. investigate if the right thing is to remove that -Wgnu-variable-sized-type-not-at-end from our CFLAGS, for now do the test the same way as it is used looks more sensible. Reported-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] [ split from a larger patch, removed blank line at EOF ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03perf python: Include rwsem.c in the pythong bidingArnaldo Carvalho de Melo1-0/+1
We'll need it for the cgroup patches, and its better to have it in a separate patch in case we need to later revert the cgroup patches. I.e. without this we have: [root@five ~]# perf test -v python 19: 'import perf' in python : --- start --- test child forked, pid 148447 Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: /tmp/build/perf/python/perf.cpython-37m-x86_64-linux-gnu.so: undefined symbol: down_write test child finished with -1 ---- end ---- 'import perf' in python: FAILED! [root@five ~]# Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-04-03rtc: ds1307: check for failed memory allocation on wdtColin Ian King1-0/+2
Currently a failed memory allocation will lead to a null pointer dereference on point wdt. Fix this by checking for a failed allocation and just returning. Addresses-Coverity: ("Dereference null return") Fixes: fd90d48db037 ("rtc: ds1307: add support for watchdog timer on ds1388") Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]>
2020-04-03Documentation: PM: sleep: Document system-wide suspend code flowsRafael J. Wysocki2-0/+271
Add a document describing high-level system-wide suspend code flows in Linux. Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-04-03cpufreq: Select schedutil when using big.LITTLELinus Walleij1-0/+1
When we are using a system with big.LITTLE HMP configuration, we need to use EAS to schedule the system. As can be seen from kernel/sched/topology.c: "EAS can be used on a root domain if it meets all the following conditions: 1. an Energy Model (EM) is available; 2. the SD_ASYM_CPUCAPACITY flag is set in the sched_domain hierarchy. 3. no SMT is detected. 4. the EM complexity is low enough to keep scheduling overheads low; 5. schedutil is driving the frequency of all CPUs of the rd;" This means that at the very least, schedutil needs to be available as a scheduling policy for EAS to work on these systems. Make this explicit by defaulting to the schedutil governor if BIG_LITTLE is selected. Currently users of the TC2 board (like me) has to figure these dependencies out themselves and it is not helpful. Suggested-by: Arnd Bergmann <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Acked-by: Sudeep Holla <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-04-03csky: Fixup cpu speculative execution to IO areaGuo Ren5-58/+25
For the memory size ( > 512MB, < 1GB), the MSA setting is: - SSEG0: PHY_START , PHY_START + 512MB - SSEG1: PHY_START + 512MB, PHY_START + 1GB But the real memory is no more than 1GB, there is a gap between the end size of memory and border of 1GB. CPU could speculatively execute to that gap and if the gap of the bus couldn't respond to the CPU request, then the crash will happen. Now make the setting with: - SSEG0: PHY_START , PHY_START + 512MB (no change) - SSEG1: Disabled (We use highmem to use the memory of 512MB~1GB) We also deprecated zhole_szie[] settings, it's only used by arm style CPUs. All memory gap should use Reserved setting of dts in csky system. Signed-off-by: Guo Ren <[email protected]>
2020-04-03csky: Add uprobes supportGuo Ren8-1/+201
This patch adds support for uprobes on csky architecture. Just like kprobe, it support single-step and simulate instructions. Signed-off-by: Guo Ren <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]>
2020-04-03csky: Add kprobes supportedGuo Ren16-2/+1197
This patch enable kprobes, kretprobes, ftrace interface. It utilized software breakpoint and single step debug exceptions, instructions simulation on csky. We use USR_BKPT replace origin instruction, and the kprobe handler prepares an excutable memory slot for out-of-line execution with a copy of the original instruction being probed. Most of instructions could be executed by single-step, but some instructions need origin pc value to execute and we need software simulate these instructions. Signed-off-by: Guo Ren <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]>
2020-04-02clk: sprd: fix to get a correct ibias of pllChunyan Zhang1-3/+4
The current driver is getting a wrong ibias index of pll clocks from number 1. This patch fix that issue, then getting ibias index from 0. Fixes: 3e37b005580b ("clk: sprd: add adjustable pll support") Signed-off-by: Chunyan Zhang <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2020-04-02Merge tag 'devicetree-for-5.7' of ↵Linus Torvalds258-2659/+5749
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Unit test for overlays with GPIO hogs - Improve dma-ranges parsing to handle dma-ranges with multiple entries - Update dtc to upstream version v1.6.0-2-g87a656ae5ff9 - Improve overlay error reporting - Device link support for power-domains and hwlocks bindings - Add vendor prefixes for Beacon, Topwise, ENE, Dell, SG Micro, Elida, PocketBook, Xiaomi, Linutronix, OzzMaker, Waveshare Electronics, and ITE Tech - Add deprecated Marvell vendor prefix 'mrvl' - A bunch of binding conversions to DT schema continues. Of note, the common serial and USB connector bindings are converted. - Add more Arm CPU compatibles - Drop Mark Rutland as DT maintainer :( * tag 'devicetree-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (106 commits) MAINTAINERS: drop an old reference to stm32 pwm timers doc MAINTAINERS: dt: update etnaviv file reference dt-bindings: usb: dwc2: fix bindings for amlogic, meson-gxbb-usb dt-bindings: uniphier-system-bus: fix warning in the example dt-bindings: display: meson-vpu: fix indentation of reg-names' "items" dt-bindings: iio: Fix adi, ltc2983 uint64-matrix schema constraints dt-bindings: power: Fix example for power-domain dt-bindings: arm: Add some constraints for PSCI nodes of: some unittest overlays not untracked of: gpio unittest kfree() wrong object dt-bindings: phy: convert phy-rockchip-inno-usb2 bindings to yaml dt-bindings: serial: sh-sci: Convert to json-schema dt-bindings: serial: Document serialN aliases dt-bindings: thermal: tsens: Set 'additionalProperties: false' dt-bindings: thermal: tsens: Fix nvmem-cell-names schema dt-bindings: vendor-prefixes: Add Beacon vendor prefix dt-bindings: vendor-prefixes: Add Topwise of: of_private.h: Replace zero-length array with flexible-array member docs: dt: fix a broken reference to input.yaml docs: dt: fix references to ap806-system-controller.txt ...
2020-04-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds264-8510/+13002
Pull SCSI updates from James Bottomley: "This series has a huge amount of churn because it pulls in Mauro's doc update changing all our txt files to rst ones. Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc, zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and some other minor updates. The major core change is Hannes moving functions out of the aacraid driver and into the core" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits) scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code scsi: ufs: Do not rely on prefetched data scsi: dc395x: remove dc395x_bios_param scsi: libiscsi: Fix error count for active session scsi: hpsa: correct race condition in offload enabled scsi: message: fusion: Replace zero-length array with flexible-array member scsi: qedi: Add PCI shutdown handler support scsi: qedi: Add MFW error recovery process scsi: ufs: Enable block layer runtime PM for well-known logical units scsi: ufs-qcom: Override devfreq parameters scsi: ufshcd: Let vendor override devfreq parameters scsi: ufshcd: Update the set frequency to devfreq scsi: ufs: Resume ufs host before accessing ufs device scsi: ufs-mediatek: customize the delay for enabling host scsi: ufs: make HCE polling more compact to improve initialization latency scsi: ufs: allow custom delay prior to host enabling scsi: ufs-mediatek: use common delay function scsi: ufs: introduce common and flexible delay function scsi: ufs: use an enum for host capabilities scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() ...
2020-04-02Merge tag 'mtd/for-5.7' of ↵Linus Torvalds95-6932/+8455
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD core changes: - Fix issue where write_cached_data() fails but write() still returns success - maps: sa1100-flash: Replace zero-length array with flexible-array member - phram: Fix a double free issue in error path - Convert fallthrough comments into statements - MAINTAINERS: Add the IRC channel to the MTD related subsystems Raw NAND core changes: - Add support for manufacturer specific suspend/resume operation - Add support for manufacturer specific lock/unlock operation - Replace zero-length array with flexible-array member - Fix a typo ("manufecturer") - Ensure nand_soft_waitrdy wait period is enough Raw NAND controller driver changes: - Brcmnand: * Add support for flash-edu for dma transfers (+ bindings) - Cadence: * Reinit completion before executing a new command * Change bad block marker size * Fix the calculation of the avaialble OOB size * Get meta data size from registers - Qualcom: * Use dma_request_chan() instead dma_request_slave_channel() * Release resources on failure within qcom_nandc_alloc() - Allwinner: * Use dma_request_chan() instead dma_request_slave_channel() - Marvell: * Use dma_request_chan() instead dma_request_slave_channel() * Release DMA channel on error - Freescale: * Use dma_request_chan() instead dma_request_slave_channel() - Macronix: * Add support for Macronix NAND randomizer (+ bindings) - Ams-delta: * Rename structures and functions to gpio_nand* * Make the driver custom I/O ready * Drop useless local variable * Support custom driver initialisation * Add module device tables * Handle more GPIO pins as optional * Make read pulses optional * Don't hardcode read/write pulse widths * Push inversion handling to gpiolib * Enable OF partition info support * Drop board specific partition info * Use struct gpio_nand_platdata * Write protect device during probe - Ingenic: * Use devm_platform_ioremap_resource() * Add dependency on MIPS || COMPILE_TEST - Denali: * Deassert write protect pin - ST: * Use dma_request_chan() instead dma_request_slave_channel() Raw NAND chip driver changes: - Toshiba: * Support reading the number of bitflips for BENAND (Built-in ECC NAND) - Macronix: * Add support for deep power down mode * Add support for block protection SPI-NAND core changes: - Do not erase the block before writing a bad block marker - Explicitly use MTD_OPS_RAW to write the bad block marker to OOB - Stop using spinand->oobbuf for buffering bad block markers - Rework detect procedure for different READ_ID operation SPI-NAND driver changes: - Toshiba: * Support for new Kioxia Serial NAND * Rename function name to change suffix and prefix (8Gbit) * Add comment about Kioxia ID - Micron: * Add new Micron SPI NAND devices with multiple dies * Add M70A series Micron SPI NAND devices * identify SPI NAND device with Continuous Read mode * Add new Micron SPI NAND devices * Describe the SPI NAND device MT29F2G01ABAGD * Generalize the OOB layout structure and function names SPI NOR core changes: - Move all the manufacturer specific quirks/code out of the core, to make the core logic more readable and thus ease maintenance. - Move the SFDP logic out of the core, it provides a better separation between the SFDP parsing and core logic. - Trim what is exposed in spi-nor.h. The SPI NOR controllers drivers must not be able to use structures that are meant just for the SPI NOR core. - Use the spi-mem direct mapping API to let advanced controllers optimize the read/write operations when they support direct mapping. - Add generic formula for the Status Register block protection handling. It fixes some long standing locking limitations and eases the addition of the 4bit block protection support. - Add block protection support for flashes with 4 block protection bits in the Status Register. SPI NOR controller drivers changes: - The mtk-quadspi driver is replaced by the new spi-mem spi-mtk-nor driver. - Merge tag 'mtk-mtd-spi-move' into spi-nor/next to avoid conflicts. HyperBus changes: - Print error msg when compatible is wrong or missing - Move mapping of direct access window from core to individual drivers" * tag 'mtd/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (103 commits) mtd: Convert fallthrough comments into statements mtd: rawnand: toshiba: Support reading the number of bitflips for BENAND (Built-in ECC NAND) MAINTAINERS: Add the IRC channel to the MTD related subsystems mtd: Fix issue where write_cached_data() fails but write() still returns success mtd: maps: sa1100-flash: Replace zero-length array with flexible-array member mtd: phram: fix a double free issue in error path mtd: spinand: toshiba: Support for new Kioxia Serial NAND mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit) mtd: rawnand: macronix: Add support for deep power down mode mtd: rawnand: Add support for manufacturer specific suspend/resume operation mtd: spi-nor: Enable locking for n25q512ax3/n25q512a mtd: spi-nor: Add SR 4bit block protection support mtd: spi-nor: Add generic formula for SR block protection handling mtd: spi-nor: Set all BP bits to one when lock_len == mtd->size mtd: spi-nor: controllers: aspeed-smc: Replace zero-length array with flexible-array member mtd: spi-nor: Clear WEL bit when erase or program errors occur MAINTAINERS: update entry after SPI NOR controller move mtd: spi-nor: Trim what is exposed in spi-nor.h mtd: spi-nor: Drop the MFR definitions mtd: spi-nor: Get rid of the now empty spi_nor_ids[] table ...
2020-04-03Merge branch 'ttm-transhuge' of git://people.freedesktop.org/~thomash/linux ↵Dave Airlie16-28/+692
into drm-next Huge page-table entries for TTM In order to reduce CPU usage [1] and in theory TLB misses this patchset enables huge- and giant page-table entries for TTM and TTM-enabled graphics drivers. Signed-off-by: Dave Airlie <[email protected]> From: Thomas Hellstrom (VMware) <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-04-02Merge tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds40-544/+1749
Pull dmaengine updates from Vinod Koul: "Core: - Some code cleanup and optimization in core by Andy - Debugfs support for displaying dmaengine channels by Peter Drivers: - New driver for uniphier-xdmac controller - Updates to stm32 dma, mdma and dmamux drivers and PM support - More updates to idxd drivers - Bunch of changes in tegra-apb driver and cleaning up of pm functions - Bunch of spelling fixes and Replace zero-length array patches - Shutdown hook for fsl-dpaa2-qdma driver - Support for interleaved transfers for ti-edma and virtualization support for k3-dma driver - Support for reset and updates in xilinx_dma driver - Improvements and locking updates in at_hdma driver" * tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits) dt-bindings: dma: renesas,usb-dmac: add r8a77961 support dmaengine: uniphier-xdmac: Remove redandant error log for platform_get_irq dmaengine: tegra-apb: Improve DMA synchronization dmaengine: tegra-apb: Don't save/restore IRQ flags in interrupt handler dmaengine: tegra-apb: mark PM functions as __maybe_unused dmaengine: fix spelling mistake "exceds" -> "exceeds" dmaengine: sprd: Set request pending flag when DMA controller is active dmaengine: ppc4xx: Use scnprintf() for avoiding potential buffer overflow dmaengine: idxd: remove global token limit check dmaengine: idxd: reflect shadow copy of traffic class programming dmaengine: idxd: Merge definition of dsa_batch_desc into dsa_hw_desc dmaengine: Create debug directories for DMA devices dmaengine: ti: k3-udma: Implement custom dbg_summary_show for debugfs dmaengine: Add basic debugfs support dmaengine: fsl-dpaa2-qdma: remove set but not used variable 'dpaa2_qdma' dmaengine: ti: edma: fix null dereference because of a typo in pointer name dmaengine: fsl-dpaa2-qdma: Adding shutdown hook dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver dt-bindings: dmaengine: Add UniPhier external DMA controller bindings dmaengine: ti: k3-udma: Implement support for atype (for virtualization) ...
Powered by cgit, Gruvboxed by Blaster4385.