aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-12-21lpfc: Fix mbox reuse in PLOGI completionJames Smart1-10/+21
Fix mbox reuse in PLOGI completion. Moved allocations so that buffer properly init'd. Signed-off-by: Dick Kennedy <[email protected]> Signed-off-by: James Smart <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-21lpfc: Use new FDMI speed definitions for 10G, 25G and 40G FCoE.James Smart7-136/+150
Use new FDMI speed definitions for 10G, 25G and 40G FCoE. Signed-off-by: Dick Kennedy <[email protected]> Signed-off-by: James Smart <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-21lpfc: Make write check error processing more resilientJames Smart1-6/+21
Make write check error processing more resilient. Checks to catch writes that fw reports weren't fully complete yet SCSI status indicated fine needed correction. Signed-off-by: Dick Kennedy <[email protected]> Signed-off-by: James Smart <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-21lpfc: Fix RDP ACC being too long.James Smart1-0/+10
Fix RDP ACC being too long. Signed-off-by: Dick Kennedy <[email protected]> Signed-off-by: James Smart <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-21lpfc: Fix RDP Speed reporting.James Smart1-10/+7
Fix RDP Speed reporting. Signed-off-by: Dick Kennedy <[email protected]> Signed-off-by: James Smart <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-21lpfc: Modularize and cleanup FDMI code in driverJames Smart9-745/+1450
Modularize, cleanup, add comments - for FDMI code in driver Note: I don't like the comments with leading # - but as we have a lot if present, I'm deferring to handle it in one big fix later. Signed-off-by: Dick Kennedy <[email protected]> Signed-off-by: James Smart <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-21lpfc: Fix crash in fcp command completion path.James Smart1-2/+2
Fix crash in fcp command completion path. Missed null check. Signed-off-by: Dick Kennedy <[email protected]> Signed-off-by: James Smart <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-21lpfc: Fix driver crash when module parameter lpfc_fcp_io_channel set to 16James Smart1-3/+6
Fix driver crash when module parameter lpfc_fcp_io_channel set to 16 Signed-off-by: Dick Kennedy <[email protected]> Signed-off-by: James Smart <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-21lpfc: Fix RegLogin failed error seen on Lancer FC during port bounceJames Smart3-9/+16
Fix RegLogin failed error seen on Lancer FC during port bounce Fix the statemachine and ref counting. Signed-off-by: Dick Kennedy <[email protected]> Signed-off-by: James Smart <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-21lpfc: Fix the FLOGI discovery logic to comply with T11 standardsJames Smart4-239/+240
Fix the FLOGI discovery logic to comply with T11 standards We weren't properly setting fabric parameters, such as R_A_TOV and E_D_TOV, when we registered the vfi object in default configs and pt2pt configs. Revise to now pass service params with the values to the firmware and ensure they are reset on link bounce. Required reworking the call sequence in the discovery threads. Signed-off-by: Dick Kennedy <[email protected]> Signed-off-by: James Smart <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-21lpfc: Fix FCF Infinite loop in lpfc_sli4_fcf_rr_next_index_get.James Smart1-2/+6
Fix FCF Infinite loop in lpfc_sli4_fcf_rr_next_index_get. Signed-off-by: Dick Kennedy <[email protected]> Signed-off-by: James Smart <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-16hisi_sas: use platform_get_irq()John Garry2-9/+5
It is preferred that drivers use platform_get_irq() instead of irq_of_parse_and_map(), so replace. Signed-off-by: John Garry <[email protected]> Acked-by: Rob Herring <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-10hisi_sas: fix error codes in hisi_sas_task_prep()Dan Carpenter1-3/+7
There were a couple cases where the error codes weren't set and also I changed the success return to "return 0;" which is the same as "return rc;" but more explicit. Fixes: 42e7a69368a5 ('hisi_sas: Add ssp command functio') Signed-off-by: Dan Carpenter <[email protected]> Tested-by: John Garry <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-10osd: fix signed char versus %02x issueRasmus Villemoes1-4/+1
If char is signed and one of these bytes happen to have a value outside the ascii range, the corresponding output will consist of "ffffff" followed by the two hex chars that were actually intended. One way to fix it would be to change the casts to (u8*) aka (unsigned char*), but it is much simpler (and generates smaller code) to use the %ph extension which was created for such short hexdumps. Signed-off-by: Rasmus Villemoes <[email protected]> Acked-by: Boaz Harrosh <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-10storvsc: add logging for error/warning messagesLong Li1-1/+33
Introduce a logging level for storvsc to log certain error/warning messages. Those messages are helpful in some environments, e.g. Microsoft Azure, for customer support and troubleshooting purposes. Signed-off-by: Long Li <[email protected]> Acked-by: K. Y. Srinivasan <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-10VMW_PVSCSI: Fix the issue of DMA-API related warnings.Josh Boyer2-7/+40
The driver is missing calls to pci_dma_mapping_error() after performing the DMA mapping, which caused DMA-API warning to show up in dmesg's output. Though that happens only when DMA_API_DEBUG option is enabled. This change fixes the issue and makes pvscsi_map_buffers() function more robust. Signed-off-by: Arvind Kumar <[email protected]> Cc: Josh Boyer <[email protected]> Reviewed-by: Thomas Hellstrom <[email protected]> Signed-off-by: Josh Boyer <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-10cxlflash: drop unlikely before IS_ERR_OR_NULLGeliang Tang1-2/+2
IS_ERR_OR_NULL already contain an unlikely compiler flag. Drop it. Signed-off-by: Geliang Tang <[email protected]> Acked-by: Manoj Kumar <[email protected]> Acked-by: Matthew R. Ochs <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-10cxlflash: a couple off by one bugsDan Carpenter1-2/+2
The "> MAX_CONTEXT" should be ">= MAX_CONTEXT". Otherwise we go one step beyond the end of the cfg->ctx_tbl[] array. Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Manoj Kumar <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Acked-by: Matthew R. Ochs <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-07scsi_dh_alua: Remove stale variablesHannes Reinecke1-2/+0
With commit 83ea0e5e3501 ("scsi_dh_alua: use scsi_vpd_tpg_id()") these variables became obsolete, but weren't removed. [mkp: Fixed checkpatch warning] Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02bfa: Update driver version to 3.2.25.0Anil Gurumurthy1-1/+1
Signed-off-by: Sudarsana Kalluru <[email protected]> Signed-off-by: Anil Gurumurthy <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02bfa: File header and user visible string changesAnil Gurumurthy39-89/+84
Signed-off-by: Sudarsana Kalluru <[email protected]> Signed-off-by: Anil Gurumurthy <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02bfa: Fix for crash when bfa_itnim is NULLAnil Gurumurthy1-0/+26
Fix a very corner case when the port gets disconnected and the BFA and FCS layers clean up references to the IT nexus. During this window if a task management command is issued by the SCSI-ML and ends up referencing a NULL itnim, it could lead to a crash. Signed-off-by: Sudarsana Kalluru <[email protected]> Signed-off-by: Anil Gurumurthy <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02bfa: Update copyright messagesAnil Gurumurthy39-78/+117
Signed-off-by: Sudarsana Kalluru <[email protected]> Signed-off-by: Anil Gurumurthy <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh_alua: use scsi_vpd_tpg_id()Hannes Reinecke1-31/+6
Use the common function 'scsi_vpd_tpg_id()' instead of open-coding it in scsi_dh_alua. [mkp: Applied by hand] Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi: Add scsi_vpd_tpg_id()Hannes Reinecke2-0/+49
Implement scsi_vpd_tpg_id() to extract the target port group id and the relative port id from SCSI VPD page 0x83. Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Hannes Reinecke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi: export 'wwid' to sysfsHannes Reinecke1-0/+17
Use scsi_vpd_lun_id() to export the world-wide unique id (wwid) to sysfs. Note that this is the 'best' wwid according to the rules in scsi_vpd_lun_id(), not every possible wwid presented by the drive. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi: Add scsi_vpd_lun_id()Hannes Reinecke2-0/+141
Add a function scsi_vpd_lun_id() to return a unique device identifcation based on the designation descriptors of VPD page 0x83. As devices might implement several descriptors the order of preference is: - NAA IEE Registered Extended - EUI-64 based 16-byte - EUI-64 based 12-byte - NAA IEEE Registered - NAA IEEE Extended A SCSI name string descriptor is preferred to all of them if the identification is longer than 16 bytes. The returned unique device identification will be formatted as a SCSI Name string to avoid clashes between different designator types. [mkp: Fixed up kernel doc comment from Johannes] Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Ewan Milne <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh_alua: simplify sense code handlingHannes Reinecke1-28/+17
Most sense code is already handled in the generic code, so we shouldn't be adding special cases here. However, when doing so we need to check for unit attention whenever we're sending an internal command. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Ewan Milne <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh_alua: rework alua_check_tpgs() to return the tpgs modeHannes Reinecke1-14/+11
Instead of returning an error code in alua_check_tpgs() we should rather return the tpgs mode directly and have a cleaner syntax. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh_alua: use unaligned access macrosHannes Reinecke1-15/+8
Use 'get_unaligned_XX' and 'put_unaligned_XX' instead of open-coding it. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh_alua: use flag for RTPG extended headerHannes Reinecke1-8/+7
We should be using a flag when RTPG extended header is not supported, that saves us sending RTPG twice for older arrays. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi: remove scsi_show_sense_hdr()Hannes Reinecke1-2/+0
Last caller is gone, so remove it. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh_alua: fixup description of stpg_endio()Hannes Reinecke1-4/+2
Fixup copy-and-paste error in the description of stpg_endio(). Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh_alua: return standard SCSI return codes in submit_rtpgHannes Reinecke1-16/+17
Fixup submit_rtpg() to always return a standard SCSI return code. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Ewan Milne <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh_alua: use standard logging functionsHannes Reinecke1-14/+13
Use standard logging functions instead of hand-crafted ones. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Ewan Milne <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh_alua: sanitze sense code handlingHannes Reinecke1-11/+7
The only check for a valid sense code is calling scsi_normalize_sense() and check the return value. So drop the pointless checks and rely on scsi_normalize_sense() to figure out if the sense code is valid. With that we can also remove the 'senselen' field. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Bart van Assche <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh_alua: improved loggingHannes Reinecke1-2/+8
Issue different logging messages if ALUA is not supported or the TPGS setting is invalid. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh_alua: Use vpd_pg83 informationHannes Reinecke1-69/+18
The SCSI device now has the VPD page 0x83 information attached, so there is no need to query it again. [mkp: Fixed a checkpatch warning] Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh_alua: Disable ALUA handling for non-disk devicesHannes Reinecke1-0/+12
Non-disk devices might support ALUA, but the firmware implementation is untested and frequently broken. As we're don't actually need it disable ALUA support for non-disk device for now. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi: ignore errors from scsi_dh_add_device()Hannes Reinecke1-3/+4
device handler initialisation might fail due to a number of reasons. But as device_handlers are optional this shouldn't cause us to disable the device entirely. So just ignore errors from scsi_dh_add_device(). Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Hannes Reinecke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-12-02scsi_dh: move 'dh_state' sysfs attribute to generic codeHannes Reinecke3-73/+60
As scsi_dh.c is now always compiled in we should be moving the 'dh_state' attribute to the generic code. Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Hannes Reinecke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-11-30mvsas: fix misleading indentationLuis de Bethencourt1-2/+2
Fix a smatch warning: drivers/scsi/mvsas/mv_sas.c:740 mvs_task_prep() warn: curly braces intended? The code is correct, the indention is misleading. When the device is not ready we want to return SAS_PHY_DOWN. But current indentation makes it look like we only do so in the else branch of if (mvi_dev). Signed-off-by: Luis de Bethencourt <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-11-30scsi: ufs: fix spelling mistake in error messageColin Ian King1-1/+1
Minor issue, fix spelling mistake, Intialization -> Initialization Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-11-30arcmsr: change driver version to v1.30.00.22-20151126Ching Huang1-1/+1
Change driver version to v1.30.00.22-20151126 Signed-off-by: Ching Huang <[email protected]> Reviewed-by: Tomas Henzl <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-11-30arcmsr: Split dma resource allocation to a new functionChing Huang1-82/+93
Split dma resource allocation and io register assignment from get_config to a new function arcmsr_alloc_io_queue. Signed-off-by: Ching Huang <[email protected]> Reviewed-by: Tomas Henzl <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-11-30arcmsr: more readability improvementsChing Huang1-47/+26
Signed-off-by: Ching Huang <[email protected]> Reviewed-by: Tomas Henzl <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-11-30arcmsr: changes driver version numberChing Huang1-1/+1
Changes driver version number. Signed-off-by: Ching Huang <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-11-30arcmsr: adds code to support new Areca adapter ARC1203Ching Huang2-5/+31
Support Areca's new PCIe to SATA RAID adapter ARC1203. Signed-off-by: Ching Huang <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-11-30arcmsr: make code more readableChing Huang2-7/+10
[mkp: Fixed checkpatch whitespace warning] Signed-off-by: Ching Huang <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2015-11-30arcmsr: fixes not release allocated resourceChing Huang1-1/+5
Releasing allocated resource if get configuration data failed. Signed-off-by: Ching Huang <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Hannes Reinicke <[email protected]> Reviewed-by: Tomas Henzl <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.