| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
fix:
arch/x86/kvm/mmu.c: In function ‘kvm_mmu_unprotect_page’:
arch/x86/kvm/mmu.c:1741: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c:1745: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘mmu_unshadow’:
arch/x86/kvm/mmu.c:1761: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘set_spte’:
arch/x86/kvm/mmu.c:2005: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘mmu_set_spte’:
arch/x86/kvm/mmu.c:2033: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 7 has type ‘gfn_t’
Signed-off-by: Xiao Guangrong <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
|
|
Pit interrupt injection was done by workqueue, so no need to check
pending pit timer in vcpu thread which could lead unnecessary
unblocking of vcpu.
Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
|
|
When CONFIG_KVM_GUEST is selected, but CONFIG_KVM is not, we were missing
some defines in asm-offsets.c and included too many headers at other places.
This patch makes above configuration work.
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Alexander Graf <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
|
|
The ALU opcode block is very regular; introduce D6ALU() to define decode
flags for 6 instructions at a time.
Suggested by Paolo Bonzini.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Use do_div() instead.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Like DIV and IDIV.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Use the new byte/word dual opcode decode.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Use the new byte/word dual opcode decode.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Use the new byte/word dual opcode decode.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Use the new byte/word dual opcode decode.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Use the new byte/word dual opcode decode.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Use the new byte/word dual opcode decode.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Use the new byte/word dual opcode decode.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Many x86 instructions come in byte and word variants distinguished with bit
0 of the opcode. Add macros to aid in defining them.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
SrcMemFAddr is not defined with the modrm operand designating a register
instead of a memory address.
Signed-off-by: Avi Kivity <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
x86_emulate_insn() will return 1 if instruction can be restarted
without re-entering a guest.
Signed-off-by: Gleb Natapov <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
function
Signed-off-by: Gleb Natapov <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Signed-off-by: Gleb Natapov <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
As suggested by Christian, we should expose headers to user space with
information that might be valuable there. The s390 virtio interface is
one of those cases. It defines an ABI between hypervisor and guest, so
it should be exposed to user space.
Reported-by: Christian Borntraeger <[email protected]>
Signed-off-by: Alexander Graf <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
The one big missing feature in s390-virtio was hotplugging. This is no more.
This patch implements hotplug add support, so you can on the fly add new devices
in the guest.
Keep in mind that this needs a patch for qemu to actually leverage the
functionality.
Signed-off-by: Alexander Graf <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Currenty the ext_param field only distinguishes between "config change" and
"vring interrupt". We can do a lot more with it though, so let's enable a
full byte of possible values and constants to #defines while at it.
Signed-off-by: Alexander Graf <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Combine guest pte read between guest pte check in the fetch path and pte prefetch
Signed-off-by: Xiao Guangrong <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Support prefetch ptes when intercept guest #PF, avoid to #PF by later
access
If we meet any failure in the prefetch path, we will exit it and
not try other ptes to avoid become heavy path
Signed-off-by: Xiao Guangrong <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Introduce this function to get consecutive gfn's pages, it can reduce
gup's overload, used by later patch
Signed-off-by: Xiao Guangrong <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Introduce hva_to_pfn_atomic(), it's the fast path and can used in atomic
context, the later patch will use it
Signed-off-by: Xiao Guangrong <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
This function is used by KVM to pin process's page in the atomic context.
Define the 'weak' function to avoid other architecture not support it
Acked-by: Nick Piggin <[email protected]>
Signed-off-by: Xiao Guangrong <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Basic informational document about x86 timekeeping and how KVM
is affected.
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Kernel time, which advances in discrete steps may progress much slower
than TSC. As a result, when kvmclock is adjusted to a new base, the
apparent time to the guest, which runs at a much higher, nsec scaled
rate based on the current TSC, may have already been observed to have
a larger value (kernel_ns + scaled tsc) than the value to which we are
setting it (kernel_ns + 0).
We must instead compute the clock as potentially observed by the guest
for kernel_ns to make sure it does not go backwards.
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
The scale_delta function for shift / multiply with 31-bit
precision moves to a common header so it can be used by both
kernel and kvm module.
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
If there are active VCPUs which are marked as belonging to
a particular hardware CPU, request a clock sync for them when
enabling hardware; the TSC could be desynchronized on a newly
arriving CPU, and we need to recompute guests system time
relative to boot after a suspend event.
This covers both cases.
Note that it is acceptable to take the spinlock, as either
no other tasks will be running and no locks held (BSP after
resume), or other tasks will be guaranteed to drop the lock
relatively quickly (AP on CPU_STARTING).
Noting we now get clock synchronization requests for VCPUs
which are starting up (or restarting), it is tempting to
attempt to remove the arch/x86/kvm/x86.c CPU hot-notifiers
at this time, however it is not correct to do so; they are
required for systems with non-constant TSC as the frequency
may not be known immediately after the processor has started
until the cpufreq driver has had a chance to run and query
the chipset.
Updated: implement better locking semantics for hardware_enable
Removed the hack of dropping and retaking the lock by adding the
semantic that we always hold kvm_lock when hardware_enable is
called. The one place that doesn't need to worry about it is
resume, as resuming a frozen CPU, the spinlock won't be taken.
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Make the match of TSC find TSC writes that are close to each other
instead of perfectly identical; this allows the compensator to also
work in migration / suspend scenarios.
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Add a helper function to compute the kernel time and convert nanoseconds
back to CPU specific cycles. Note that these must not be called in preemptible
context, as that would mean the kernel could enter software suspend state,
which would cause non-atomic operation.
Also, convert the KVM_SET_CLOCK / KVM_GET_CLOCK ioctls to use the kernel
time helper, these should be bootbased as well.
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
When CPUs with unstable TSCs enter deep C-state, TSC may stop
running. This causes us to require resynchronization. Since
we can't tell when this may potentially happen, we assume the
worst by forcing re-compensation for it at every point the VCPU
task is descheduled.
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Move the TSC control logic from the vendor backends into x86.c
by adding adjust_tsc_offset to x86 ops. Now all TSC decisions
can be done in one place.
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
If creating an SMP guest with unstable host TSC, issue a warning
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
This simplifies much of the init code; we can now simply always
call tsc_khz_changed, optionally passing it a new value, or letting
it figure out the existing value (while interrupts are disabled, and
thus, by inference from the rule, not raceful against CPU hotplug or
frequency updates, which will issue IPIs to the local CPU to perform
this very same task).
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Attempt to synchronize TSCs which are reset to the same value. In the
case of a reliable hardware TSC, we can just re-use the same offset, but
on non-reliable hardware, we can get closer by adjusting the offset to
match the elapsed time.
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Also, ensure that the storing of the offset and the reading of the TSC
are never preempted by taking a spinlock. While the lock is overkill
now, it is useful later in this patch series.
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Change svm / vmx to be the same internally and write TSC offset
instead of bare TSC in helper functions. Isolated as a single
patch to contain code movement.
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
This is used only by the VMX code, and is not done properly;
if the TSC is indeed backwards, it is out of sync, and will
need proper handling in the logic at each and every CPU change.
For now, drop this test during init as misguided.
Signed-off-by: Zachary Amsden <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
commit ad05c88266b4cce1c820928ce8a0fb7690912ba1
(KVM: create aggregate kvm_total_used_mmu_pages value)
introduce percpu counter kvm_total_used_mmu_pages but never
destroy it, this may cause oops when rmmod & modprobe.
Signed-off-by: Wei Yongjun <[email protected]>
Acked-by: Tim Pepper <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Latest kvm mmu_shrink code rework makes kernel changes kvm->arch.n_used_mmu_pages/
kvm->arch.n_max_mmu_pages at kvm_mmu_free_page/kvm_mmu_alloc_page, which is called
by kvm_mmu_commit_zap_page. So the kvm->arch.n_used_mmu_pages or
kvm_mmu_available_pages(vcpu->kvm) is unchanged after kvm_mmu_prepare_zap_page(),
This caused kvm_mmu_change_mmu_pages/__kvm_mmu_free_some_pages loops forever.
Moving kvm_mmu_commit_zap_page would make the while loop performs as normal.
Reported-by: Avi Kivity <[email protected]>
Signed-off-by: Xiaotian Feng <[email protected]>
Tested-by: Avi Kivity <[email protected]>
Cc: Marcelo Tosatti <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Tim Pepper <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Add JrCXZ instruction emulation (opcode 0xe3)
Used by FreeBSD boot loader.
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Add LDS/LES/LFS/LGS/LSS instruction emulation.
(opcode 0xc4, 0xc5, 0x0f 0xb2, 0x0f 0xb4~0xb5)
Signed-off-by: Wei Yongjun <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>
|
|
Of slab shrinkers, the VM code says:
* Note that 'shrink' will be passed nr_to_scan == 0 when the VM is
* querying the cache size, so a fastpath for that case is appropriate.
and it *means* it. Look at how it calls the shrinkers:
nr_before = (*shrinker->shrink)(0, gfp_mask);
shrink_ret = (*shrinker->shrink)(this_scan, gfp_mask);
So, if you do anything stupid in your shrinker, the VM will doubly
punish you.
The mmu_shrink() function takes the global kvm_lock, then acquires
every VM's kvm->mmu_lock in sequence. If we have 100 VMs, then
we're going to take 101 locks. We do it twice, so each call takes
202 locks. If we're under memory pressure, we can have each cpu
trying to do this. It can get really hairy, and we've seen lock
spinning in mmu_shrink() be the dominant entry in profiles.
This is guaranteed to optimize at least half of those lock
aquisitions away. It removes the need to take any of the locks
when simply trying to count objects.
A 'percpu_counter' can be a large object, but we only have one
of these for the entire system. There are not any better
alternatives at the moment, especially ones that handle CPU
hotplug.
Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Tim Pepper <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
|
|
Doing this makes the code much more readable. That's
borne out by the fact that this patch removes code. "used"
also happens to be the number that we need to return back to
the slab code when our shrinker gets called. Keeping this
value as opposed to free makes the next patch simpler.
So, 'struct kvm' is kzalloc()'d. 'struct kvm_arch' is a
structure member (and not a pointer) of 'struct kvm'. That
means they start out zeroed. I _think_ they get initialized
properly by kvm_mmu_change_mmu_pages(). But, that only happens
via kvm ioctls.
Another benefit of storing 'used' intead of 'free' is
that the values are consistent from the moment the structure is
allocated: no negative "used" value.
Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Tim Pepper <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
|
|
arch.n_alloc_mmu_pages is a poor choice of name. This value truly
means, "the number of pages which _may_ be allocated". But,
reading the name, "n_alloc_mmu_pages" implies "the number of allocated
mmu pages", which is dead wrong.
It's really the high watermark, so let's give it a name to match:
nr_max_mmu_pages. This change will make the next few patches
much more obvious and easy to read.
Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Tim Pepper <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
|
|
"free" is a poor name for this value. In this context, it means,
"the number of mmu pages which this kvm instance should be able to
allocate." But "free" implies much more that the objects are there
and ready for use. "available" is a much better description, especially
when you see how it is calculated.
In this patch, we abstract its use into a function. We'll soon
replace the function's contents by calculating the value in a
different way.
All of the reads of n_free_mmu_pages are taken care of in this
patch. The modification sites will be handled in a patch
later in the series.
Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Tim Pepper <[email protected]>
Signed-off-by: Avi Kivity <[email protected]>
|