| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, the notification of a new max latency is sent from
timerlat's IRQ handler anytime a new max latency is found.
While this behavior is not wrong, the send IPI overhead itself
will increase the thread latency and that is not the desired
effect (tracing overhead).
Moreover, the thread will notify a new max latency again because
the thread latency as it is always higher than the IRQ latency
that woke it up.
The only case in which it is helpful to notify a new max latency
from IRQ is when stop tracing (for the IRQ) is set, as in this
case, the thread will not be dispatched.
Notify a new max latency from the IRQ handler only if stop tracing is
set for the IRQ handler.
Link: https://lkml.kernel.org/r/2c2d9a56c0886c8402ba320de32856cbbb10c2bb.1652175637.git.bristot@kernel.org
Cc: Juri Lelli <[email protected]>
Cc: Ingo Molnar <[email protected]>
Reported-by: Clark Williams <[email protected]>
Fixes: a955d7eac177 ("trace: Add timerlat tracer")
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Max Filippov reported:
When building kernel with CONFIG_KRETPROBES=n kernel/kprobes.c
compilation fails with the following messages:
kernel/kprobes.c: In function ‘recycle_rp_inst’:
kernel/kprobes.c:1273:32: error: implicit declaration of function
‘get_kretprobe’
kernel/kprobes.c: In function ‘kprobe_flush_task’:
kernel/kprobes.c:1299:35: error: ‘struct task_struct’ has no member
named ‘kretprobe_instances’
This came from the commit d741bf41d7c7 ("kprobes: Remove
kretprobe hash") which introduced get_kretprobe() and
kretprobe_instances member in task_struct when CONFIG_KRETPROBES=y,
but did not make recycle_rp_inst() and kprobe_flush_task()
depending on CONFIG_KRETPORBES.
Since those functions are only used for kretprobe, move those
functions into #ifdef CONFIG_KRETPROBE area.
Link: https://lkml.kernel.org/r/165163539094.74407.3838114721073251225.stgit@devnote2
Reported-by: Max Filippov <[email protected]>
Fixes: d741bf41d7c7 ("kprobes: Remove kretprobe hash")
Cc: "Naveen N . Rao" <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Cc: "David S . Miller" <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Signed-off-by: Masami Hiramatsu <[email protected]>
Tested-by: Max Filippov <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Setting set_event_pid with trailing whitespace lead to endless write
system calls like below.
$ strace echo "123 " > /sys/kernel/debug/tracing/set_event_pid
execve("/usr/bin/echo", ["echo", "123 "], ...) = 0
...
write(1, "123 \n", 5) = 4
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
write(1, "\n", 1) = 0
....
This is because, the result of trace_get_user's are not returned when it
read at least one pid. To fix it, update read variable even if
parser->idx == 0.
The result of applied patch is below.
$ strace echo "123 " > /sys/kernel/debug/tracing/set_event_pid
execve("/usr/bin/echo", ["echo", "123 "], ...) = 0
...
write(1, "123 \n", 5) = 5
close(1) = 0
Link: https://lkml.kernel.org/r/[email protected]
Cc: Ingo Molnar <[email protected]>
Cc: Baik Song An <[email protected]>
Cc: Hong Yeon Kim <[email protected]>
Cc: Taeung Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Fixes: 4909010788640 ("tracing: Add set_event_pid directory for future use")
Signed-off-by: Wonhyuk Yang <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
In create_var_ref(), init_var_ref() is called to initialize the fields
of variable ref_field, which is allocated in the previous function call
to create_hist_field(). Function init_var_ref() allocates the
corresponding fields such as ref_field->system, but frees these fields
when the function encounters an error. The caller later calls
destroy_hist_field() to conduct error handling, which frees the fields
and the variable itself. This results in double free of the fields which
are already freed in the previous function.
Fix this by storing NULL to the corresponding fields when they are freed
in init_var_ref().
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 067fe038e70f ("tracing: Add variable reference handling to hist triggers")
CC: [email protected]
Reviewed-by: Masami Hiramatsu <[email protected]>
Reviewed-by: Tom Zanussi <[email protected]>
Signed-off-by: Keita Suzuki <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The tracing_set_trace_write() function just removes the trailing whitespace
from the user supplied tracer name, but the leading whitespace should also
be removed.
In addition, if the user supplied tracer name contains only a few
whitespace characters, the first one will not be removed using the current
method, which results it a single whitespace character left in the buf.
To fix all of these issues, we use strim() to correctly remove both the
leading and trailing whitespace.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yuntao Wang <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The ftrace_process_locs() function may return -ENOMEM error code, which
should be handled by the callers.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yuntao Wang <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Creating tracefs entries with tracefs_create_file() followed by pr_warn()
is tedious and repetitive, we can use trace_create_file() to simplify
this process and make the code more readable.
Link: https://lkml.kernel.org/r/[email protected]
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Yuntao Wang <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The LARP patchset added an awkward coupling point between libxfs and
what would be libxlog, if the XFS log were actually its own library.
Move the code that sets up logged xattr updates out of libxfs and into
xfs_xattr.c so that libxfs no longer has to know about xlog_* functions.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
The LARP patchset added an awkward coupling point between libxfs and
what would be libxlog, if the XFS log were actually its own library.
Move the code that enables logged xattr updates out of "lib"xlog and into
xfs_xattr.c so that it no longer has to know about xlog_* functions.
While we're at it, give xfs_xattr.c its own header file.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
Since LARP is an experimental debug-only feature, we should try to warn
about it being in use once per mount, not once per reboot.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
Currently, we don't have a consistent story around logging when an
EXPERIMENTAL feature gets turned on at runtime -- online fsck and shrink
log a message once per day across all mounts, and the recently merged
LARP mode only ever does it once per insmod cycle or reboot.
Because EXPERIMENTAL tags are supposed to go away eventually, convert
the existing daily warnings into state flags that travel with the mount,
and warn once per mount. Making this an opstate flag means that we'll
be able to capture the experimental usage in the ftrace output too.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
There's no need to spam the logs every time we clear the log incompat
flags -- if someone is periodically using one of these features, they'll
be cleared every time the log tries to clean itself, which can get
pretty chatty:
$ dmesg | grep -i clear
[ 5363.894711] XFS (sdd): Clearing log incompat feature flags.
[ 5365.157516] XFS (sdd): Clearing log incompat feature flags.
[ 5369.388543] XFS (sdd): Clearing log incompat feature flags.
[ 5371.281246] XFS (sdd): Clearing log incompat feature flags.
These aren't high value messages either -- nothing's gone wrong, and
nobody's trying anything tricky.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
Pull OpenRISC updates from Stafford Horne:
- A few sparse warning fixups and other cleanups I noticed when working
on a recent TLB bug found on a new OpenRISC core bring up.
- A few fixup's from me and Jason A Donenfeld to help shutdown OpenRISC
platforms when running CI tests
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Allow power off handler overriding
openrisc: Remove unused IMMU tlb workardound
openrisc/fault: Fix symbol scope warnings
openrisc/delay: Add include to fix symbol not declared warning
openrisc/time: Fix symbol scope warnings
openrisc/traps: Declare unhandled_exception for asmlinkage
openrisc/traps: Remove die_if_kernel function
openrisc/traps: Declare file scope symbols as static
openrisc: Update litex defconfig to support glibc userland
openrisc: Pretty print show_registers memory dumps
openrisc: Add syscall details to emergency syscall debugging
openrisc: Add support for liteuart emergency printing
openrisc: Cleanup emergency print handling
openrisc: Add gcc machine instruction flag configuration
openrisc: define nop command for simulator reboot
openrisc: remove bogus nops and shutdowns
openrisc: fix typos in comments
|
|
While we're messing around with how recovery allocates and frees the
buffer cancellation table, convert the allocation to use kmalloc_array
instead of the old kmem_alloc APIs, and make it handle a null return,
even though that's not likely.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
If log recovery fails, we free the memory used by the buffer
cancellation buckets, but we don't actually traverse each bucket list to
free the individual xfs_buf_cancel objects. This leads to a memory
leak, as reported by kmemleak in xfs/051:
unreferenced object 0xffff888103629560 (size 32):
comm "mount", pid 687045, jiffies 4296935916 (age 10.752s)
hex dump (first 32 bytes):
08 d3 0a 01 00 00 00 00 08 00 00 00 01 00 00 00 ................
d0 f5 0b 92 81 88 ff ff 80 64 64 25 81 88 ff ff .........dd%....
backtrace:
[<ffffffffa0317c83>] kmem_alloc+0x73/0x140 [xfs]
[<ffffffffa03234a9>] xlog_recover_buf_commit_pass1+0x139/0x200 [xfs]
[<ffffffffa032dc27>] xlog_recover_commit_trans+0x307/0x350 [xfs]
[<ffffffffa032df15>] xlog_recovery_process_trans+0xa5/0xe0 [xfs]
[<ffffffffa032e12d>] xlog_recover_process_data+0x8d/0x140 [xfs]
[<ffffffffa032e49d>] xlog_do_recovery_pass+0x19d/0x740 [xfs]
[<ffffffffa032f22d>] xlog_do_log_recovery+0x6d/0x150 [xfs]
[<ffffffffa032f343>] xlog_do_recover+0x33/0x1d0 [xfs]
[<ffffffffa032faba>] xlog_recover+0xda/0x190 [xfs]
[<ffffffffa03194bc>] xfs_log_mount+0x14c/0x360 [xfs]
[<ffffffffa030bfed>] xfs_mountfs+0x50d/0xa60 [xfs]
[<ffffffffa03124b5>] xfs_fs_fill_super+0x6a5/0x950 [xfs]
[<ffffffff812b92a5>] get_tree_bdev+0x175/0x280
[<ffffffff812b7c3a>] vfs_get_tree+0x1a/0x80
[<ffffffff812e366f>] path_mount+0x6ff/0xaa0
[<ffffffff812e3b13>] __x64_sys_mount+0x103/0x140
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
Move the code that allocates and frees the buffer cancellation tables
used by log recovery into the file that actually uses the tables. This
is a precursor to some cleanups and a memory leak fix.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
- Basic eBPF support (Sergey)
* tag 'arc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: bpf: define uapi for BPF_PROG_TYPE_PERF_EVENT program type
ARC: disasm: handle ARCv2 case in kprobe get/set functions
ARC: implement syscall tracepoints
ARC: enable HAVE_REGS_AND_STACK_ACCESS_API feature
|
|
The recent patch to improve btree cycle checking caused a regression
when I rebased the in-memory btree branch atop the 5.19 for-next branch,
because in-memory short-pointer btrees do not have AG numbers. This
produced the following complaint from kmemleak:
unreferenced object 0xffff88803d47dde8 (size 264):
comm "xfs_io", pid 4889, jiffies 4294906764 (age 24.072s)
hex dump (first 32 bytes):
90 4d 0b 0f 80 88 ff ff 00 a0 bd 05 80 88 ff ff .M..............
e0 44 3a a0 ff ff ff ff 00 df 08 06 80 88 ff ff .D:.............
backtrace:
[<ffffffffa0388059>] xfbtree_dup_cursor+0x49/0xc0 [xfs]
[<ffffffffa029887b>] xfs_btree_dup_cursor+0x3b/0x200 [xfs]
[<ffffffffa029af5d>] __xfs_btree_split+0x6ad/0x820 [xfs]
[<ffffffffa029b130>] xfs_btree_split+0x60/0x110 [xfs]
[<ffffffffa029f6da>] xfs_btree_make_block_unfull+0x19a/0x1f0 [xfs]
[<ffffffffa029fada>] xfs_btree_insrec+0x3aa/0x810 [xfs]
[<ffffffffa029fff3>] xfs_btree_insert+0xb3/0x240 [xfs]
[<ffffffffa02cb729>] xfs_rmap_insert+0x99/0x200 [xfs]
[<ffffffffa02cf142>] xfs_rmap_map_shared+0x192/0x5f0 [xfs]
[<ffffffffa02cf60b>] xfs_rmap_map_raw+0x6b/0x90 [xfs]
[<ffffffffa0384a85>] xrep_rmap_stash+0xd5/0x1d0 [xfs]
[<ffffffffa0384dc0>] xrep_rmap_visit_bmbt+0xa0/0xf0 [xfs]
[<ffffffffa0384fb6>] xrep_rmap_scan_iext+0x56/0xa0 [xfs]
[<ffffffffa03850d8>] xrep_rmap_scan_ifork+0xd8/0x160 [xfs]
[<ffffffffa0385195>] xrep_rmap_scan_inode+0x35/0x80 [xfs]
[<ffffffffa03852ee>] xrep_rmap_find_rmaps+0x10e/0x270 [xfs]
I noticed that xfs_btree_insrec has a bunch of debug code that return
out of the function immediately, without freeing the "new" btree cursor
that can be returned when _make_block_unfull calls xfs_btree_split. Fix
the error return in this function to free the btree cursor.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
xfs/434 and xfs/436 have been reporting occasional memory leaks of
xfs_dquot objects. These tests themselves were the messenger, not the
culprit, since they unload the xfs module, which trips the slub
debugging code while tearing down all the xfs slab caches:
=============================================================================
BUG xfs_dquot (Tainted: G W ): Objects remaining in xfs_dquot on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Slab 0xffffea000606de00 objects=30 used=5 fp=0xffff888181b78a78 flags=0x17ff80000010200(slab|head|node=0|zone=2|lastcpupid=0xfff)
CPU: 0 PID: 3953166 Comm: modprobe Tainted: G W 5.18.0-rc6-djwx #rc6 d5824be9e46a2393677bda868f9b154d917ca6a7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20171121_152543-x86-ol7-builder-01.us.oracle.com-4.el7.1 04/01/2014
Since we don't generally rmmod the xfs module between fstests, this
means that xfs/434 is really just the canary in the coal mine --
something leaked a dquot, but we don't know who. After days of pounding
on fstests with kmemleak enabled, I finally got it to spit this out:
unreferenced object 0xffff8880465654c0 (size 536):
comm "u10:4", pid 88, jiffies 4294935810 (age 29.512s)
hex dump (first 32 bytes):
60 4a 56 46 80 88 ff ff 58 ea e4 5c 80 88 ff ff `JVF....X..\....
00 e0 52 49 80 88 ff ff 01 00 01 00 00 00 00 00 ..RI............
backtrace:
[<ffffffffa0740f6c>] xfs_dquot_alloc+0x2c/0x530 [xfs]
[<ffffffffa07443df>] xfs_qm_dqread+0x6f/0x330 [xfs]
[<ffffffffa07462a2>] xfs_qm_dqget+0x132/0x4e0 [xfs]
[<ffffffffa0756bb0>] xfs_qm_quotacheck_dqadjust+0xa0/0x3e0 [xfs]
[<ffffffffa075724d>] xfs_qm_dqusage_adjust+0x35d/0x4f0 [xfs]
[<ffffffffa06c9068>] xfs_iwalk_ag_recs+0x348/0x5d0 [xfs]
[<ffffffffa06c95d3>] xfs_iwalk_run_callbacks+0x273/0x540 [xfs]
[<ffffffffa06c9e8d>] xfs_iwalk_ag+0x5ed/0x890 [xfs]
[<ffffffffa06ca22f>] xfs_iwalk_ag_work+0xff/0x170 [xfs]
[<ffffffffa06d22c9>] xfs_pwork_work+0x79/0x130 [xfs]
[<ffffffff81170bb2>] process_one_work+0x672/0x1040
[<ffffffff81171b1b>] worker_thread+0x59b/0xec0
[<ffffffff8118711e>] kthread+0x29e/0x340
[<ffffffff810032bf>] ret_from_fork+0x1f/0x30
Now we know that quotacheck is at fault, but even this report was
canaryish -- it was triggered by xfs/494, which doesn't actually mount
any filesystems. (kmemleak can be a little slow to notice leaks, even
with fstests repeatedly whacking it to look for them.) Looking at the
*previous* fstest, however, showed that the test run before xfs/494 was
xfs/117. The tipoff to the problem is in this excerpt from dmesg:
XFS (sda4): Quotacheck needed: Please wait.
XFS (sda4): Metadata corruption detected at xfs_dinode_verify.part.0+0xdb/0x7b0 [xfs], inode 0x119 dinode
XFS (sda4): Unmount and run xfs_repair
XFS (sda4): First 128 bytes of corrupted metadata buffer:
00000000: 49 4e 81 a4 03 02 00 00 00 00 00 00 00 00 00 00 IN..............
00000010: 00 00 00 01 00 00 00 00 00 90 57 54 54 1a 4c 68 ..........WTT.Lh
00000020: 81 f9 7d e1 6d ee 16 00 34 bd 7d e1 6d ee 16 00 ..}.m...4.}.m...
00000030: 34 bd 7d e1 6d ee 16 00 00 00 00 00 00 00 00 00 4.}.m...........
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 02 00 00 00 00 00 00 00 00 96 80 f3 ab ................
00000060: ff ff ff ff da 57 7b 11 00 00 00 00 00 00 00 03 .....W{.........
00000070: 00 00 00 01 00 00 00 10 00 00 00 00 00 00 00 08 ................
XFS (sda4): Quotacheck: Unsuccessful (Error -117): Disabling quotas.
The dinode verifier decided that the inode was corrupt, which causes
iget to return with EFSCORRUPTED. Since this happened during
quotacheck, it is obvious that the kernel aborted the inode walk on
account of the corruption error and disabled quotas. Unfortunately, we
neglect to purge the dquot cache before doing that, which is how the
dquots leaked.
The problems started 10 years ago in commit b84a3a, when the dquot lists
were converted to a radix tree, but the error handling behavior was not
correctly preserved -- in that commit, if the bulkstat failed and
usrquota was enabled, the bulkstat failure code would be overwritten by
the result of flushing all the dquots to disk. As long as that
succeeds, we'd continue the quota mount as if everything were ok, but
instead we're now operating with a corrupt inode and incorrect quota
usage counts. I didn't notice this bug in 2019 when I wrote commit
ebd126a, which changed quotacheck to skip the dqflush when the scan
doesn't complete due to inode walk failures.
Introduced-by: b84a3a96751f ("xfs: remove the per-filesystem list of dquots")
Fixes: ebd126a651f8 ("xfs: convert quotacheck to use the new iwalk functions")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
xfs/538 on a 1kB block filesystem failed with this assert:
XFS: Assertion failed: cur->bc_btnum != XFS_BTNUM_BMAP || cur->bc_ino.allocated == 0 || xfs_is_shutdown(cur->bc_mp), file: fs/xfs/libxfs/xfs_btree.c, line: 448
The problem was that an allocation failed unexpectedly in
xfs_bmbt_alloc_block() after roughly 150,000 minlen allocation error
injections, resulting in an EFSCORRUPTED error being returned to
xfs_bmapi_write(). The error occurred on extent-to-btree format
conversion allocating the new root block:
RIP: 0010:xfs_bmbt_alloc_block+0x177/0x210
Call Trace:
<TASK>
xfs_btree_new_iroot+0xdf/0x520
xfs_btree_make_block_unfull+0x10d/0x1c0
xfs_btree_insrec+0x364/0x790
xfs_btree_insert+0xaa/0x210
xfs_bmap_add_extent_hole_real+0x1fe/0x9a0
xfs_bmapi_allocate+0x34c/0x420
xfs_bmapi_write+0x53c/0x9c0
xfs_alloc_file_space+0xee/0x320
xfs_file_fallocate+0x36b/0x450
vfs_fallocate+0x148/0x340
__x64_sys_fallocate+0x3c/0x70
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa
Why the allocation failed at this point is unknown, but is likely
that we ran the transaction out of reserved space and filesystem out
of space with bmbt blocks because of all the minlen allocations
being done causing worst case fragmentation of a large allocation.
Regardless of the cause, we've then called xfs_bmapi_finish() which
calls xfs_btree_del_cursor(cur, error) to tear down the cursor.
So we have a failed operation, error != 0, cur->bc_ino.allocated > 0
and the filesystem is still up. The assert fails to take into
account that allocation can fail with an error and the transaction
teardown will shut the filesystem down if necessary. i.e. the
assert needs to check "|| error != 0" as well, because at this point
shutdown is pending because the current transaction is dirty....
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
Not fatal, the assert is there to catch developer attention. I'm
seeing this occasionally during recoveryloop testing after a
shutdown, and I don't want this to stop an overnight recoveryloop
run as it is currently doing.
Convert the ASSERT to a XFS_IS_CORRUPT() check so it will dump a
corruption report into the log and cause a test failure that way,
but it won't stop the machine dead.
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
Commit dc04db2aa7c9 has caused a small aim7 regression, showing a
small increase in CPU usage in __xfs_btree_check_sblock() as a
result of the extra checking.
This is likely due to the endian conversion of the sibling poitners
being unconditional instead of relying on the compiler to endian
convert the NULL pointer at compile time and avoiding the runtime
conversion for this common case.
Rework the checks so that endian conversion of the sibling pointers
is only done if they are not null as the original code did.
.... and these need to be "inline" because the compiler completely
fails to inline them automatically like it should be doing.
$ size fs/xfs/libxfs/xfs_btree.o*
text data bss dec hex filename
51874 240 0 52114 cb92 fs/xfs/libxfs/xfs_btree.o.orig
51562 240 0 51802 ca5a fs/xfs/libxfs/xfs_btree.o.inline
Just when you think the tools have advanced sufficiently we don't
have to care about stuff like this anymore, along comes a reminder
that *our tools still suck*.
Fixes: dc04db2aa7c9 ("xfs: detect self referencing btree sibling pointers")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Dave Chinner <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
- It was time to tidy up kernel/module.c and one way of starting with
that effort was to split it up into files. At my request Aaron Tomlin
spearheaded that effort with the goal to not introduce any functional
at all during that endeavour. The penalty for the split is +1322
bytes total, +112 bytes in data, +1210 bytes in text while bss is
unchanged. One of the benefits of this other than helping make the
code easier to read and review is summoning more help on review for
changes with livepatching so kernel/module/livepatch.c is now pegged
as maintained by the live patching folks.
The before and after with just the move on a defconfig on x86-64:
$ size kernel/module.o
text data bss dec hex filename
38434 4540 104 43078 a846 kernel/module.o
$ size -t kernel/module/*.o
text data bss dec hex filename
4785 120 0 4905 1329 kernel/module/kallsyms.o
28577 4416 104 33097 8149 kernel/module/main.o
1158 8 0 1166 48e kernel/module/procfs.o
902 108 0 1010 3f2 kernel/module/strict_rwx.o
3390 0 0 3390 d3e kernel/module/sysfs.o
832 0 0 832 340 kernel/module/tree_lookup.o
39644 4652 104 44400 ad70 (TOTALS)
- Aaron added module unload taint tracking (MODULE_UNLOAD_TAINT_TRACKING),
to enable tracking unloaded modules which did taint the kernel.
- Christophe Leroy added CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
which lets architectures to request having modules data in vmalloc
area instead of module area. There are three reasons why an
architecture might want this:
a) On some architectures (like book3s/32) it is not possible to
protect against execution on a page basis. The exec stuff can be
mapped by different arch segment sizes (on book3s/32 that is 256M
segments). By default the module area is in an Exec segment while
vmalloc area is in a NoExec segment. Using vmalloc lets you muck
with module data as NoExec on those architectures whereas before
you could not.
b) By pushing more module data to vmalloc you also increase the
probability of module text to remain within a closer distance
from kernel core text and this reduces trampolines, this has been
reported on arm first and powerpc folks are following that lead.
c) Free'ing module_alloc() (Exec by default) area leaves this
exposed as Exec by default, some architectures have some security
enhancements to set this as NoExec on free, and splitting module
data with text let's future generic special allocators be added
to the kernel without having developers try to grok the tribal
knowledge per arch. Work like Rick Edgecombe's permission vmalloc
interface [0] becomes easier to address over time.
[0] https://lore.kernel.org/lkml/[email protected]/#r
- Masahiro Yamada's symbol search enhancements
* tag 'modules-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (33 commits)
module: merge check_exported_symbol() into find_exported_symbol_in_section()
module: do not binary-search in __ksymtab_gpl if fsa->gplok is false
module: do not pass opaque pointer for symbol search
module: show disallowed symbol name for inherit_taint()
module: fix [e_shstrndx].sh_size=0 OOB access
module: Introduce module unload taint tracking
module: Move module_assert_mutex_or_preempt() to internal.h
module: Make module_flags_taint() accept a module's taints bitmap and usable outside core code
module.h: simplify MODULE_IMPORT_NS
powerpc: Select ARCH_WANTS_MODULES_DATA_IN_VMALLOC on book3s/32 and 8xx
module: Remove module_addr_min and module_addr_max
module: Add CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC
module: Introduce data_layout
module: Prepare for handling several RB trees
module: Always have struct mod_tree_root
module: Rename debug_align() as strict_align()
module: Rework layout alignment to avoid BUG_ON()s
module: Move module_enable_x() and frob_text() in strict_rwx.c
module: Make module_enable_x() independent of CONFIG_ARCH_HAS_STRICT_MODULE_RWX
module: Move version support into a separate file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"For two kernel releases now kernel/sysctl.c has been being cleaned up
slowly, since the tables were grossly long, sprinkled with tons of
#ifdefs and all this caused merge conflicts with one susbystem or
another.
This tree was put together to help try to avoid conflicts with these
cleanups going on different trees at time. So nothing exciting on this
pull request, just cleanups.
Thanks a lot to the Uniontech and Huawei folks for doing some of this
nasty work"
* tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits)
sched: Fix build warning without CONFIG_SYSCTL
reboot: Fix build warning without CONFIG_SYSCTL
kernel/kexec_core: move kexec_core sysctls into its own file
sysctl: minor cleanup in new_dir()
ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n
fs/proc: Introduce list_for_each_table_entry for proc sysctl
mm: fix unused variable kernel warning when SYSCTL=n
latencytop: move sysctl to its own file
ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y
ftrace: Fix build warning
ftrace: move sysctl_ftrace_enabled to ftrace.c
kernel/do_mount_initrd: move real_root_dev sysctls to its own file
kernel/delayacct: move delayacct sysctls to its own file
kernel/acct: move acct sysctls to its own file
kernel/panic: move panic sysctls to its own file
kernel/lockdep: move lockdep sysctls to its own file
mm: move page-writeback sysctls to their own file
mm: move oom_kill sysctls to their own file
kernel/reboot: move reboot sysctls to its own file
sched: Move energy_aware sysctls to topology.c
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"api:
- hrtimer fix
qcom:
- log pending irq during resume
- minor cosmetic changes
omap:
- use pm_runtime_resume_and_get
imx:
- use pm_runtime_resume_and_get
- remove redundant initializer
mtk:
- added GCE header for MT8186
- enable support for MT8186
tegra:
- remove redundant NULL check
- added hsp_sm_ops for send/recv api
- support shared mailboxes
stm:
- remove unsupported "wakeup" irq
pcc:
- sanitize mbox allocated memory before use
misc:
- documentation fixes for arm_mhu and qcom-ipcc"
* tag 'mailbox-v5.19' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: qcom-ipcc: Fix -Wunused-function with CONFIG_PM_SLEEP=n
mailbox: forward the hrtimer if not queued and under a lock
mailbox: qcom-ipcc: Log the pending interrupt during resume
mailbox: pcc: Fix an invalid-load caught by the address sanitizer
dt-bindings: mailbox: remove the IPCC "wakeup" IRQ
mailbox: correct kerneldoc
mailbox: omap: using pm_runtime_resume_and_get to simplify the code
mailbox:imx: using pm_runtime_resume_and_get
mailbox: mediatek: support mt8186 adsp mailbox
dt-bindings: mailbox: mtk,adsp-mbox: add mt8186 compatible name
mailbox: tegra-hsp: Add 128-bit shared mailbox support
dt-bindings: tegra186-hsp: add type for shared mailboxes
mailbox: tegra-hsp: Add tegra_hsp_sm_ops
dt-bindings: gce: add the GCE header file for MT8186
mailbox: remove an unneeded NULL check on list iterator
mailbox: imx: remove redundant initializer
dt-bindings: mailbox: qcom-ipcc: simplify the example
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have lots of small changes all over the place, but no huge reworks
or new drivers:
- use ioread()/iowrite() interfaces instead of raw inb()/outb() in
drivers
- make irqchips immutable due to the new warning popping up when
drivers try to modify the irqchip structures
- add new compatibles to dt-bindings for realtek-otto, renesas-rcar
and pca95xx
- add support for new models to gpio-rcar, gpio-pca953x &
gpio-realtek-otto
- allow parsing of GPIO hogs represented as children nodes of
gpio-uniphier
- define a set of common GPIO consumer strings in dt-bindings
- shrink code in gpio-ml-ioh by using more devres interfaces
- pass arguments to devm_kcalloc() in correct order in gpio-sim
- add new helpers for iterating over GPIO firmware nodes and
descriptors to gpiolib core and use it in several drivers
- drop unused syscon_regmap_lookup_by_compatible() function
- correct format specifiers and signedness of variables in GPIO ACPI
- drop unneeded error checks in gpio-ftgpio
- stop using the deprecated of_gpio.h header in gpio-zevio
- drop platform_data support in gpio-max732x
- simplify Kconfig dependencies in gpio-vf610
- use raw spinlocks where needed to make PREEMPT_RT happy
- fix return values in board files using gpio-pcf857x
- convert more drivers to using fwnode instead of of_node
- minor fixes and improvements in gpiolib core"
* tag 'gpio-updates-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (55 commits)
gpio: sifive: Make the irqchip immutable
gpio: rcar: Make the irqchip immutable
gpio: pcf857x: Make the irqchip immutable
gpio: pca953x: Make the irqchip immutable
gpio: dwapb: Make the irqchip immutable
gpio: sim: Use correct order for the parameters of devm_kcalloc()
gpio: ml-ioh: Convert to use managed functions pcim* and devm_*
gpio: ftgpio: Remove unneeded ERROR check before clk_disable_unprepare
gpio: ws16c48: Utilize iomap interface
gpio: gpio-mm: Utilize iomap interface
gpio: 104-idio-16: Utilize iomap interface
gpio: 104-idi-48: Utilize iomap interface
gpio: 104-dio-48e: Utilize iomap interface
gpio: zevio: drop of_gpio.h header
gpio: max77620: Make the irqchip immutable
dt-bindings: gpio: pca95xx: add entry for pca6408
gpio: pca953xx: Add support for pca6408
gpio: max732x: Drop unused support for irq and setup code via platform data
gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610
gpio: syscon: Remove usage of syscon_regmap_lookup_by_compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"cros_ec:
- Fix wrong error handling path
- Clean-up patches
cros_ec_chardev:
- Re-introduce cros_ec_cmd_xfer to fix ABI broken
cros_ec_lpcs:
- Support the Framework Laptop
cros_ec_typec:
- Fix NULL dereference
chromeos_acpi:
- Add ChromeOS ACPI device driver
- Fix Sphinx errors when `make htmldocs`
misc:
- Drop BUG_ON()s"
* tag 'tag-chrome-platform-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Use imperative mood for ChromeOS ACPI sysfs ABI descriptions
platform/chrome: Use tables for values lists of ChromeOS ACPI sysfs ABI
platform/chrome: cros_ec_spi: drop BUG_ON() if `din` isn't large enough
platform/chrome: cros_ec_spi: drop unneeded BUG_ON()
platform/chrome: cros_ec_i2c: drop BUG_ON() in cros_ec_pkt_xfer_i2c()
platform/chrome: cros_ec_proto: drop BUG_ON() in cros_ec_get_host_event()
platform/chrome: cros_ec_proto: drop BUG_ON() in cros_ec_prepare_tx()
platform/chrome: correct cros_ec_prepare_tx() usage
platform/chrome: cros_ec_proto: drop unneeded BUG_ON() in prepare_packet()
platform/chrome: Add ChromeOS ACPI device driver
platform/chrome: cros_ec_typec: Check for EC driver
platform/chrome: cros_ec_lpcs: reserve the MEC LPC I/O ports first
platform/chrome: cros_ec_lpcs: detect the Framework Laptop
platform/chrome: Re-introduce cros_ec_cmd_xfer and use it for ioctls
platform/chrome: cros_ec: append newline to all logs
platform/chrome: cros_ec: sort header inclusion alphabetically
platform/chrome: cros_ec: determine `wake_enabled` in cros_ec_suspend()
platform/chrome: cros_ec: remove unused variable `was_wake_device`
platform/chrome: cros_ec: fix error handling in cros_ec_register()
|
|
This fixes a handful of issues with the XIP support, which has bit
rotted some lately.
* palmer/riscv-xip:
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
|
|
Commit e5499dd7253c ("media: lirc: revert removal of unused feature
flags") reintroduced unused feature flags in the lirc uapi header, but
failed to reintroduce the necessary exceptions for the docs.
Fixes: e5499dd7253c ("media: lirc: revert removal of unused feature flags")
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
|
|
When cloning a packet-based limit expression, copy the cost value as
well. Otherwise the new limit is not functional anymore.
Fixes: 3b9e2ea6c11bf ("netfilter: nft_limit: move stateful fields out of expression data")
Signed-off-by: Phil Sutter <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Since 3e135cd499bf ("netfilter: nft_dynset: dynamic stateful expression
instantiation"), it is possible to attach stateful expressions to set
elements.
cd5125d8f518 ("netfilter: nf_tables: split set destruction in deactivate
and destroy phase") introduces conditional destruction on the object to
accomodate transaction semantics.
nft_expr_init() calls expr->ops->init() first, then check for
NFT_STATEFUL_EXPR, this stills allows to initialize a non-stateful
lookup expressions which points to a set, which might lead to UAF since
the set is not properly detached from the set->binding for this case.
Anyway, this combination is non-sense from nf_tables perspective.
This patch fixes this problem by checking for NFT_STATEFUL_EXPR before
expr->ops->init() is called.
The reporter provides a KASAN splat and a poc reproducer (similar to
those autogenerated by syzbot to report use-after-free errors). It is
unknown to me if they are using syzbot or if they use similar automated
tool to locate the bug that they are reporting.
For the record, this is the KASAN splat.
[ 85.431824] ==================================================================
[ 85.432901] BUG: KASAN: use-after-free in nf_tables_bind_set+0x81b/0xa20
[ 85.433825] Write of size 8 at addr ffff8880286f0e98 by task poc/776
[ 85.434756]
[ 85.434999] CPU: 1 PID: 776 Comm: poc Tainted: G W 5.18.0+ #2
[ 85.436023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Fixes: 0b2d8a7b638b ("netfilter: nf_tables: add helper functions for expression handling")
Reported-and-tested-by: Aaron Adams <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Almost all of MM here. A few things are still getting finished off,
reviewed, etc.
- Yang Shi has improved the behaviour of khugepaged collapsing of
readonly file-backed transparent hugepages.
- Johannes Weiner has arranged for zswap memory use to be tracked and
managed on a per-cgroup basis.
- Munchun Song adds a /proc knob ("hugetlb_optimize_vmemmap") for
runtime enablement of the recent huge page vmemmap optimization
feature.
- Baolin Wang contributes a series to fix some issues around hugetlb
pagetable invalidation.
- Zhenwei Pi has fixed some interactions between hwpoisoned pages and
virtualization.
- Tong Tiangen has enabled the use of the presently x86-only
page_table_check debugging feature on arm64 and riscv.
- David Vernet has done some fixup work on the memcg selftests.
- Peter Xu has taught userfaultfd to handle write protection faults
against shmem- and hugetlbfs-backed files.
- More DAMON development from SeongJae Park - adding online tuning of
the feature and support for monitoring of fixed virtual address
ranges. Also easier discovery of which monitoring operations are
available.
- Nadav Amit has done some optimization of TLB flushing during
mprotect().
- Neil Brown continues to labor away at improving our swap-over-NFS
support.
- David Hildenbrand has some fixes to anon page COWing versus
get_user_pages().
- Peng Liu fixed some errors in the core hugetlb code.
- Joao Martins has reduced the amount of memory consumed by
device-dax's compound devmaps.
- Some cleanups of the arch-specific pagemap code from Anshuman
Khandual.
- Muchun Song has found and fixed some errors in the TLB flushing of
transparent hugepages.
- Roman Gushchin has done more work on the memcg selftests.
... and, of course, many smaller fixes and cleanups. Notably, the
customary million cleanup serieses from Miaohe Lin"
* tag 'mm-stable-2022-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (381 commits)
mm: kfence: use PAGE_ALIGNED helper
selftests: vm: add the "settings" file with timeout variable
selftests: vm: add "test_hmm.sh" to TEST_FILES
selftests: vm: check numa_available() before operating "merge_across_nodes" in ksm_tests
selftests: vm: add migration to the .gitignore
selftests/vm/pkeys: fix typo in comment
ksm: fix typo in comment
selftests: vm: add process_mrelease tests
Revert "mm/vmscan: never demote for memcg reclaim"
mm/kfence: print disabling or re-enabling message
include/trace/events/percpu.h: cleanup for "percpu: improve percpu_alloc_percpu event trace"
include/trace/events/mmflags.h: cleanup for "tracing: incorrect gfp_t conversion"
mm: fix a potential infinite loop in start_isolate_page_range()
MAINTAINERS: add Muchun as co-maintainer for HugeTLB
zram: fix Kconfig dependency warning
mm/shmem: fix shmem folio swapoff hang
cgroup: fix an error handling path in alloc_pagecache_max_30M()
mm: damon: use HPAGE_PMD_SIZE
tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate
nodemask.h: fix compilation error with GCC12
...
|
|
Daniel Wagner reported to me that readproc.h got deprecated. Also,
while the procps-ng library was available on Fedora, it was not available
on RHEL, which is a piece of evidence that it was not that used.
rtla uses procps-ng only to find the PID of the tracers' workload.
I used the procps-ng library to avoid reinventing the wheel. But in this
case, reinventing the wheel took me less time than the time we already
took trying to work around problems.
Implement a function that reads /proc/ entries, checking if:
- the entry is a directory
- the directory name is composed only of digits (PID)
- the directory contains the comm file
- the comm file contains a comm that matches the tracers'
workload prefix.
- then return true; otherwise, return false.
And use it instead of procps-ng.
Link: https://lkml.kernel.org/r/e8276e122ee9eb2c5a0ba8e673fb6488b924b825.1652423574.git.bristot@kernel.org
Cc: John Kacur <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Tao Zhou <[email protected]>
Fixes: b1696371d865 ("rtla: Helper functions for rtla")
Reported-by: Daniel Wagner <[email protected]>
Reviewed-by: Daniel Wagner <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
rtla's function __set_sched_attr() was borrowed from stalld, but I
forgot to update the error message to something meaningful for rtla.
Update the error message from:
boost_with_deadline failed to boost pid PID: STRERROR
to a proper one:
Failed to set sched attributes to the pid PID: STRERROR
Link: https://lkml.kernel.org/r/a2d19b2c53f6512aefd1ee7f8c1bd19d4fc8b99d.1651247710.git.bristot@kernel.org
Link: https://lore.kernel.org/r/eeded730413e7feaa13f946924bcf2cbf7dd9561.1650617571.git.bristot@kernel.org/
Fixes: b1696371d865 ("rtla: Helper functions for rtla")
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
- Change to "The rtla meta-tool includes"
- Remove an unnecessary "But, "
- Adjust the formatting of the paragraph resulting from the changes.
- Simplify the wording for the libraries and tools.
Link: https://lkml.kernel.org/r/437f0accdde53713ab3cce46f3564be00487e031.1651247710.git.bristot@kernel.org
Link: https://lore.kernel.org/r/[email protected]/
Cc: Daniel Bristot de Oliveria <[email protected]>
Fixes: 79ce8f43ac5a ("rtla: Real-Time Linux Analysis tool")
Acked-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: John Kacur <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The mode on /usr/bin is often 555 these days,
but make install on rtla overwrites this with 755
Fix this by preserving the current directory if it exists.
Link: https://lkml.kernel.org/r/8c294a6961080a1970fd8b73f7bcf1e3984579e2.1651247710.git.bristot@kernel.org
Link: https://lore.kernel.org/r/[email protected]
Cc: Daniel Bristot de Oliveria <[email protected]>
Fixes: 79ce8f43ac5a ("rtla: Real-Time Linux Analysis tool")
Acked-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: John Kacur <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Fix the following null/deref_null.cocci errors:
./tools/tracing/rtla/src/osnoise_hist.c:870:31-36: ERROR: record is NULL but dereferenced.
./tools/tracing/rtla/src/osnoise_top.c:650:31-36: ERROR: record is NULL but dereferenced.
./tools/tracing/rtla/src/timerlat_hist.c:905:31-36: ERROR: record is NULL but dereferenced.
./tools/tracing/rtla/src/timerlat_top.c:700:31-36: ERROR: record is NULL but dereferenced.
"record" is NULL before calling osnoise_init_trace_tool.
Add a tag "out_free" to avoid dereferring a NULL pointer.
Link: https://lkml.kernel.org/r/ae0e4500d383db0884eb2820286afe34ca303778.1651247710.git.bristot@kernel.org
Link: https://lore.kernel.org/r/[email protected]/
Cc: [email protected]
Cc: Daniel Bristot de Oliveira <[email protected]>
Fixes: 51d64c3a1819 ("rtla: Add -e/--event support")
Acked-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Wan Jiabing <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Linus had a problem compiling RTLA, saying:
"[...] I wish the tracing tools would do a bit more package
checking and helpful error messages too, rather than just
fail with:
fatal error: tracefs.h: No such file or directory"
Which is indeed not a helpful message. Update the Makefile, adding
proper checks for the dependencies, with useful information about
how to resolve possible problems.
For example, the previous error is now reported as:
$ make
********************************************
** NOTICE: libtracefs version 1.3 or higher not found
**
** Consider installing the latest libtracefs from your
** distribution, e.g., 'dnf install libtracefs' on Fedora,
** or from source:
**
** https://git.kernel.org/pub/scm/libs/libtrace/libtracefs.git/
**
********************************************
These messages are inspired by the ones used on trace-cmd, as suggested
by Stevel Rostedt.
Link: https://lore.kernel.org/r/CAHk-=whxmA86E=csNv76DuxX_wYsg8mW15oUs3XTabu2Yc80yw@mail.gmail.com/
Changes from V1:
- Moved the rst2man check to the install phase (when it is used).
- Removed the procps-ng lib check [1] as it is being removed.
[1] a0f9f8c1030c66305c9b921057c3d483064d5529.1651220820.git.bristot@kernel.org
Link: https://lkml.kernel.org/r/3f1fac776c37e4b67c876a94e5a0e45ed022ff3d.1651238057.git.bristot@kernel.org
Cc: Ingo Molnar <[email protected]>
Cc: Andrew Morton <[email protected]>
Reported-by: Linus Torvalds <[email protected]>
Suggested-by: Steven Rostedt <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add HOSTPKG_CONFIG env variable to allow users to override pkg-config
- Support W=e as a shorthand for KCFLAGS=-Werror
- Fix CONFIG_IKHEADERS build to support toybox cpio
- Add scripts/dummy-tools/pahole to ease distro packagers' life
- Suppress false-positive warnings from checksyscalls.sh for W=2 build
- Factor out the common code of arch/*/boot/install.sh into
scripts/install.sh
- Support 'kernel-install' tool in scripts/prune-kernel
- Refactor module-versioning to link the symbol versions at the final
link of vmlinux and modules
- Remove CONFIG_MODULE_REL_CRCS because module-versioning now works in
an arch-agnostic way
- Refactor modpost, Makefiles
* tag 'kbuild-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (56 commits)
genksyms: adjust the output format to modpost
kbuild: stop merging *.symversions
kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS
modpost: extract symbol versions from *.cmd files
modpost: add sym_find_with_module() helper
modpost: change the license of EXPORT_SYMBOL to bool type
modpost: remove left-over cross_compile declaration
kbuild: record symbol versions in *.cmd files
kbuild: generate a list of objects in vmlinux
modpost: move *.mod.c generation to write_mod_c_files()
modpost: merge add_{intree_flag,retpoline,staging_flag} to add_header
scripts/prune-kernel: Use kernel-install if available
kbuild: factor out the common installation code into scripts/install.sh
modpost: split new_symbol() to symbol allocation and hash table addition
modpost: make sym_add_exported() always allocate a new symbol
modpost: make multiple export error
modpost: dump Module.symvers in the same order of modules.order
modpost: traverse the namespace_list in order
modpost: use doubly linked list for dump_lists
modpost: traverse unresolved symbols in order
...
|
|
This is enough to get gputop working :)
v2: rebase and some addition cleanup
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Shashank Sharma <[email protected]> (v1)
Signed-off-by: Alex Deucher <[email protected]>
|
|
Convert fdinfo format to one documented in drm-usage-stats.rst.
It turned out that the existing implementation was actually completely
nonsense. The calculated percentages indeed represented the usage of the
engine, but with varying time slices.
So 10% usage for application A could mean something completely different
than 10% usage for application B.
Completely nuke that and just use the now standardized nanosecond
interface.
v2: drop the documentation change for now, nuke percentage calculation
v3: only account for each hw_ip, move the time_spend to the ctx mgr.
v4: move general ctx changes into separate patch, rework the fdinfo to
ctx_mgr interface so that all usages are calculated at once, drop
some unecessary and dangerous refcount dance.
v5: add one more comment how we calculate the time spend
Signed-off-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Shashank Sharma <[email protected]>
Cc: Daniel Vetter <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Increase the minor version number to indicate that the new flags are
available.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Marek Olšák <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add the AMDGPU_VM_NOALLOC flag to let userspace control MALL allocation.
v2: also add the flag to the allowed flags.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]> (v1)
Reviewed-by: Marek Olšák <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add a AMDGPU_GEM_CREATE_DISCARDABLE flag to note that the content of a BO
doesn't needs to be preserved during eviction.
KFD was already using a similar functionality for SVM BOs so replace the
internal flag with the new UAPI.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Marek Olšák <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add a beige goby PCI ID.
Reviewed-by: Guchun Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
When powerplay is not enabled, return AUTO as default level.
Signed-off-by: Lijo Lazar <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Spelling mistakes (triple letters) in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Submitting a cs with 0 chunks, causes an oops later, found trying
to execute the wrong userspace driver.
MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo
[172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8
[172536.665188] #PF: supervisor read access in kernel mode
[172536.665189] #PF: error_code(0x0000) - not-present page
[172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0
[172536.665195] Oops: 0000 [#1] SMP NOPTI
[172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS
[172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015
[172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu]
[172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10
[172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246
[172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68
[172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38
[172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40
[172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28
[172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000
[172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0
[172536.665287] Call Trace:
[172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu]
[172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm]
[172536.665338] drm_ioctl+0x201/0x3b0 [drm]
[172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu]
[172536.665372] ? selinux_file_ioctl+0x135/0x230
[172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
[172536.665403] __x64_sys_ioctl+0x83/0xb0
[172536.665406] do_syscall_64+0x33/0x40
[172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018
Signed-off-by: Dave Airlie <[email protected]>
Cc: [email protected]
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|