| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Just like all other I2C/SMBus commands, the start signal for the SMBus
Quick Command is S, not A.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Daniel Schaefer <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
All in-tree users have been converted to the new i2c_new_client_device
function, so remove this deprecated one.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Move away from the deprecated API and advertise the new one.
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Move away from the deprecated API and return the shiny new ERRPTR where
useful.
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Daniel Thompson <[email protected]>
Acked-by: Lee Jones <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Move away from the deprecated API and return the shiny new ERRPTR where
useful.
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
i2c_new_client() is deprecated, use the replacement
i2c_new_client_device(). Also, we have a helper to check if a driver is
bound. Use it to simplify the code. Note that this changes the errno for
a failed device creation from ENOMEM to ENODEV. No callers currently
interpret this errno, though, so we use this condensed error check.
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
module_put() balances try_module_get(), not request_module(). Fix the
error path to match that.
Fixes: 2066facca4c7 ("drm/kms: slave encoder interface.")
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Emil Velikov <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
As per walk_page_range documentation, mmap lock should be acquired by the
caller before invoking walk_page_range. mmap_assert_locked gets triggered
without that. The details can be found here.
http://lists.infradead.org/pipermail/linux-riscv/2020-June/010335.html
Fixes: 395a21ff859c(riscv: add ARCH_HAS_SET_DIRECT_MAP support)
Signed-off-by: Atish Patra <[email protected]>
Reviewed-by: Michel Lespinasse <[email protected]>
Reviewed-by: Zong Li <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
As per the table 4.4 of version "20190608-Priv-MSU-Ratified" of the
RISC-V instruction set manual[0], the PTE permission bit combination of
"write+exec only" is reserved for future use. Hence, don't allow such
mapping request in mmap call.
An issue is been reported by David Abdurachmanov, that while running
stress-ng with "sysbadaddr" argument, RCU stalls are observed on RISC-V
specific kernel.
This issue arises when the stress-sysbadaddr request for pages with
"write+exec only" permission bits and then passes the address obtain
from this mmap call to various system call. For the riscv kernel, the
mmap call should fail for this particular combination of permission bits
since it's not valid.
[0]: http://dabbelt.com/~palmer/keep/riscv-isa-manual/riscv-privileged-20190608-1.pdf
Signed-off-by: Yash Shah <[email protected]>
Reported-by: David Abdurachmanov <[email protected]>
[Palmer: Refer to the latest ISA specification at the only link I could
find, and update the terminology.]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.8-2020-06-17:
amdgpu:
- Fix kvfree/kfree mixup
- Fix hawaii device id in powertune configuration
- Display FP fixes
- Documentation fixes
amdkfd:
- devcgroup check fix
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix for timeslicing and virtual engines/unpremptable requests
(+ 1 dependency patch)
- Fixes into TypeC register programming and interrupt storm detecting
- Disable DIP on MST ports with the transcoder clock still on
- Avoid missing GT workarounds at reset for HSW and older gens
- Fix for unwinding multiple requests missing force restore
- Fix encoder type check for DDI vswing sequence
- Build warning fixes
Signed-off-by: Dave Airlie <[email protected]>
From: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Merge non-faulting memory access cleanups from Christoph Hellwig:
"Andrew and I decided to drop the patches implementing your suggested
rename of the probe_kernel_* and probe_user_* helpers from -mm as
there were way to many conflicts.
After -rc1 might be a good time for this as all the conflicts are
resolved now"
This also adds a type safety checking patch on top of the renaming
series to make the subtle behavioral difference between 'get_user()' and
'get_kernel_nofault()' less potentially dangerous and surprising.
* emailed patches from Christoph Hellwig <[email protected]>:
maccess: make get_kernel_nofault() check for minimal type compatibility
maccess: rename probe_kernel_address to get_kernel_nofault
maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofault
maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault
|
|
Now that we've renamed probe_kernel_address() to get_kernel_nofault()
and made it look and behave more in line with get_user(), some of the
subtle type behavior differences end up being more obvious and possibly
dangerous.
When you do
get_user(val, user_ptr);
the type of the access comes from the "user_ptr" part, and the above
basically acts as
val = *user_ptr;
by design (except, of course, for the fact that the actual dereference
is done with a user access).
Note how in the above case, the type of the end result comes from the
pointer argument, and then the value is cast to the type of 'val' as
part of the assignment.
So the type of the pointer is ultimately the more important type both
for the access itself.
But 'get_kernel_nofault()' may now _look_ similar, but it behaves very
differently. When you do
get_kernel_nofault(val, kernel_ptr);
it behaves like
val = *(typeof(val) *)kernel_ptr;
except, of course, for the fact that the actual dereference is done with
exception handling so that a faulting access is suppressed and returned
as the error code.
But note how different the casting behavior of the two superficially
similar accesses are: one does the actual access in the size of the type
the pointer points to, while the other does the access in the size of
the target, and ignores the pointer type entirely.
Actually changing get_kernel_nofault() to act like get_user() is almost
certainly the right thing to do eventually, but in the meantime this
patch adds logit to at least verify that the pointer type is compatible
with the type of the result.
In many cases, this involves just casting the pointer to 'void *' to
make it obvious that the type of the pointer is not the important part.
It's not how 'get_user()' acts, but at least the behavioral difference
is now obvious and explicit.
Cc: Christoph Hellwig <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Better describe what this helper does, and match the naming of
copy_from_kernel_nofault.
Also switch the argument order around, so that it acts and looks
like get_user().
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently, address spaces in warnings are displayed as '<asn:X>' with
'X' being the address space's arbitrary number.
But since sparse v0.6.0-rc1 (late December 2018), sparse allows you to
define the address spaces using an identifier instead of a number. This
identifier is then directly used in the warnings.
So, use the identifiers '__user', '__iomem', '__percpu' & '__rcu' for
the corresponding address spaces. The default address space, __kernel,
being not displayed in warnings, stays defined as '0'.
With this change, warnings that used to be displayed as:
cast removes address space '<asn:1>' of expression
... void [noderef] <asn:2> *
will now be displayed as:
cast removes address space '__user' of expression
... void [noderef] __iomem *
This also moves the __kernel annotation to be the first one, since it is
quite different from the others because it's the default one, and so:
- it's never displayed
- it's normally not needed, nor in type annotations, nor in cast
between address spaces. The only time it's needed is when it's
combined with a typeof to express "the same type as this one but
without the address space"
- it can't be defined with a name, '0' must be used.
So, it seemed strange to me to have it in the middle of the other
ones.
Signed-off-by: Luc Van Oostenryck <[email protected]>
Acked-by: Miguel Ojeda <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kill_bdev does not have any external user, so make it static.
Signed-off-by: Zheng Bin <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
When a filesystem is mounted on a loop device and on a loop ioctl
LOOP_SET_STATUS64, because of kill_bdev, buffer_head mappings are getting
destroyed.
kill_bdev
truncate_inode_pages
truncate_inode_pages_range
do_invalidatepage
block_invalidatepage
discard_buffer -->clear BH_Mapped flag
sb_bread
__bread_gfp
bh = __getblk_gfp
-->discard_buffer clear BH_Mapped flag
__bread_slow
submit_bh
submit_bh_wbc
BUG_ON(!buffer_mapped(bh)) --> hit this BUG_ON
Fixes: 5db470e229e2 ("loop: drop caches if offset or block_size are changed")
Signed-off-by: Zheng Bin <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before
detach") may cause system freeze during suspend.
Using async_synchronize_full() in PM callbacks is wrong, since async
callbacks that are already scheduled may wait for not-yet-scheduled
callbacks, causes a circular dependency.
Instead of using big hammer like async_synchronize_full(), use async
cookie to make sure port probe are synced, without affecting other
scheduled PM callbacks.
Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach")
Suggested-by: John Garry <[email protected]>
Signed-off-by: Kai-Heng Feng <[email protected]>
Tested-by: John Garry <[email protected]>
BugLink: https://bugs.launchpad.net/bugs/1867983
Signed-off-by: Jens Axboe <[email protected]>
|
|
There is a specific API to treat raw data as UUID, i.e. import_uuid().
Use it instead of uuid_copy() with explicit casting.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
In io_read() or io_write(), when io request is submitted successfully,
it'll go through the below sequence:
kfree(iovec);
req->flags &= ~REQ_F_NEED_CLEANUP;
return ret;
But clearing REQ_F_NEED_CLEANUP might be unsafe. The io request may
already have been completed, and then io_complete_rw_iopoll()
and io_complete_rw() will be called, both of which will also modify
req->flags if needed. This causes a race condition, with concurrent
non-atomic modification of req->flags.
To eliminate this race, in io_read() or io_write(), if io request is
submitted successfully, we don't remove REQ_F_NEED_CLEANUP flag. If
REQ_F_NEED_CLEANUP is set, we'll leave __io_req_aux_free() to the
iovec cleanup work correspondingly.
Cc: [email protected]
Signed-off-by: Xiaoguang Wang <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
required libraries
When build perf with ASan or UBSan, if libasan or libubsan can not find,
the feature-glibc is 0 and there exists the following error log which is
wrong, because we can find gnu/libc-version.h in /usr/include,
glibc-devel is also installed.
[yangtiezhu@linux perf]$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address'
BUILD: Doing 'make -j4' parallel build
HOSTCC fixdep.o
HOSTLD fixdep-in.o
LINK fixdep
<stdin>:1:0: warning: -fsanitize=address and -fsanitize=kernel-address are not supported for this target
<stdin>:1:0: warning: -fsanitize=address not supported for this target
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:393: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop.
Makefile.perf:224: recipe for target 'sub-make' failed
make[1]: *** [sub-make] Error 2
Makefile:69: recipe for target 'all' failed
make: *** [all] Error 2
[yangtiezhu@linux perf]$ ls /usr/include/gnu/libc-version.h
/usr/include/gnu/libc-version.h
After install libasan and libubsan, the feature-glibc is 1 and the build
process is success, so the cause is related with libasan or libubsan, we
should check them and print an error log to reflect the reality.
Committer testing:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ OFF ]
... dwarf_getlocations: [ OFF ]
... glibc: [ OFF ]
... gtk2: [ OFF ]
... libbfd: [ OFF ]
... libcap: [ OFF ]
... libelf: [ OFF ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... zlib: [ OFF ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ OFF ]
... libaio: [ OFF ]
... libzstd: [ OFF ]
... disassembler-four-args: [ OFF ]
Makefile.config:401: *** No libasan found, please install libasan. Stop.
make[1]: *** [Makefile.perf:231: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
make: Leaving directory '/home/acme/git/perf/tools/perf'
$
$
$ sudo dnf install libasan
<SNIP>
Installed:
libasan-9.3.1-2.fc31.x86_64
$
$
$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
<SNIP>
CC /tmp/build/perf/util/pmu-flex.o
FLEX /tmp/build/perf/util/expr-flex.c
CC /tmp/build/perf/util/expr-bison.o
CC /tmp/build/perf/util/expr.o
CC /tmp/build/perf/util/expr-flex.o
CC /tmp/build/perf/util/parse-events-flex.o
CC /tmp/build/perf/util/parse-events.o
LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o
LD /tmp/build/perf/util/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
INSTALL python-scripts
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf/tools/perf'
$ ldd ~/bin/perf | grep asan
libasan.so.5 => /lib64/libasan.so.5 (0x00007f0904164000)
$
And if we rebuild without -fsanitize-address:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
$ make O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j12' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libbfd: [ on ]
... libcap: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... libzstd: [ on ]
... disassembler-four-args: [ on ]
GEN /tmp/build/perf/common-cmds.h
CC /tmp/build/perf/exec-cmd.o
<SNIP>
INSTALL perf_completion-script
INSTALL perf-tip
make: Leaving directory '/home/acme/git/perf/tools/perf'
$ ldd ~/bin/perf | grep asan
$
Signed-off-by: Tiezhu Yang <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: tiezhu yang <[email protected]>
Cc: xuefeng li <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
In order to move pointer checks like IS_ERR_VALUE() out of the hotpath
and into the reader path of a trace event, user space tools need to be
able to parse that. IS_ERR_VALUE() is defined as:
#define IS_ERR_VALUE() unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO)
Which eventually turns into:
__builtin_expect(!!((unsigned long)(void *)(x) >= (unsigned long)-4095), 0)
Now the traceevent parser can handle most of that except for the
__builtin_expect(), which needs to be added.
Link: https://lore.kernel.org/linux-mm/[email protected]/
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Jaewon Kim <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit c61f13eaa1ee1 ("gcc-plugins: Add structleak for more stack
initialization") added "__attribute__((user))" to the user when
stackleak detector is enabled. This now appears in the field format of
system call trace events for system calls that have user buffers. The
"__attribute__((user))" breaks the parsing in libtraceevent. That needs
to be handled.
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Jaewon Kim <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
There's several locations that open code realloc and strcat() to append
text to strings. Add an append() function that takes a delimiter and a
string to append to another string.
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Jaewon Lim <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kees Kook <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Namhyung Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Unprivileged memory accesses generated by the so-called "translated"
instructions (e.g. STTR) at EL1 can cause EL0 watchpoints to fire
unexpectedly if kernel debugging is enabled. In such cases, the
hw_breakpoint logic will invoke the user overflow handler which will
typically raise a SIGTRAP back to the current task. This is futile when
returning back to the kernel because (a) the signal won't have been
delivered and (b) userspace can't handle the thing anyway.
Avoid invoking the user overflow handler for watchpoints triggered by
kernel uaccess routines, and instead single-step over the faulting
instruction as we would if no overflow handler had been installed.
(Fixes tag identifies the introduction of unprivileged memory accesses,
which exposed this latent bug in the hw_breakpoint code)
Cc: Catalin Marinas <[email protected]>
Cc: James Morse <[email protected]>
Fixes: 57f4959bad0a ("arm64: kernel: Add support for User Access Override")
Reported-by: Luis Machado <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Link: https://lore.kernel.org/r/20200617213407.GA1385@embeddedor
Signed-off-by: Will Deacon <[email protected]>
|
|
hugetlb_cma_reserve() is called at the wrong place. numa_init has not been
done yet. so all reserved memory will be located at node0.
Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Barry Song <[email protected]>
Reviewed-by: Anshuman Khandual <[email protected]>
Acked-by: Roman Gushchin <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
There is an issue when tune the number for read and write queues,
if the total queue count was not changed. The hctx->type cannot
be updated, since __blk_mq_update_nr_hw_queues will return directly
if the total queue count has not been changed.
Reproduce:
dmesg | grep "default/read/poll"
[ 2.607459] nvme nvme0: 48/0/0 default/read/poll queues
cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c
48 default
tune the write queues to 24:
echo 24 > /sys/module/nvme/parameters/write_queues
echo 1 > /sys/block/nvme0n1/device/reset_controller
dmesg | grep "default/read/poll"
[ 433.547235] nvme nvme0: 24/24/0 default/read/poll queues
cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c
48 default
The driver's hardware queue mapping is not same as block layer.
Signed-off-by: Weiping Zhang <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Add rename the gpu busy percentage for consistency and
add the mem busy percentage documentation.
Reviewed-by: Evan Quan <[email protected]>
Reviewed-by: Nirmoy Das <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Vega10 and previous asics use one interface, vega20 and newer
use another.
Reviewed-by: Evan Quan <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The existing code used the major version number of the DRM driver
instead of the device major number of the DRM subsystem for
validating access for a devices cgroup.
This meant that accesses allowed by the devices cgroup weren't
permitted and certain accesses denied by the devices cgroup were
permitted (if they matched the wrong major device number).
Signed-off-by: Lorenz Brun <[email protected]>
Fixes: 6b855f7b83d2f ("drm/amdkfd: Check against device cgroup")
Reviewed-off-by: Felix Kuehling <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
clang static analysis reports an undefined return
security/selinux/ss/conditional.c:79:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
return s[0];
^~~~~~~~~~~
static int cond_evaluate_expr( ...
{
u32 i;
int s[COND_EXPR_MAXDEPTH];
for (i = 0; i < expr->len; i++)
...
return s[0];
When expr->len is 0, the loop which sets s[0] never runs.
So return -1 if the loop never runs.
Cc: [email protected]
Signed-off-by: Tom Rix <[email protected]>
Acked-by: Stephen Smalley <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
|
|
During build compiler reports some 'false positive' warnings about
variables {'seq_ops', 'filtered_pids', 'other_pids'} may be used
uninitialized. This patch silences these warnings.
Also delete some useless spaces
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kaitao Cheng <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
It is possible that a platform that is capable of 'namespace labels'
comes up without the labels properly initialized. In this case, the
region's 'align' attribute is hidden. Howerver, once the user does
initialize he labels, the 'align' attribute still stays hidden, which is
unexpected.
The sysfs_update_group() API is meant to address this, and could be
called during region probe, but it has entanglements with the device
'lockdep_mutex'. Therefore, simply make the 'align' attribute always
visible. It doesn't matter what it says for label-less namespaces, since
it is not possible to change their allocation anyway.
Suggested-by: Dan Williams <[email protected]>
Signed-off-by: Vishal Verma <[email protected]>
Cc: Dan Williams <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
If we're doing polled IO and end up having requests being submitted
async, then completions can come in while we're waiting for refs to
drop. We need to reap these manually, as nobody else will be looking
for them.
Break the wait into 1/20th of a second time waits, and check for done
poll completions if we time out. Otherwise we can have done poll
completions sitting in ctx->poll_list, which needs us to reap them but
we're just waiting for them.
Cc: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
If both the tracer and the tracee are compat processes, and gprs[2]
is assigned a value by __poke_user_compat, then the higher 32 bits
of gprs[2] are cleared, IS_ERR_VALUE() always returns false, and
syscall_get_error() always returns 0.
Fix the implementation by sign-extending the value for compat processes
the same way as x86 implementation does.
The bug was exposed to user space by commit 201766a20e30f ("ptrace: add
PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite.
This change fixes strace syscall tampering on s390.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 753c4dd6a2fa2 ("[S390] ptrace changes")
Cc: Elvira Khabirova <[email protected]>
Cc: [email protected] # v2.6.28+
Signed-off-by: Dmitry V. Levin <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
The way we produce SBALs to the device (first update q->nr_buf_used,
then update the SLSB) should ensure that we never see some of the
SLSB states when scanning the queue for progress.
So make some noise if we do, this implies a bug in our SBAL tracking.
Also tweak the WARN msg to provide more information.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
This removes the last remaining accesses to ->qdio_data from internal
code. Just pass the qdio_irq struct where needed instead.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
If we're unlucky with timing, we could be running task_work after
having dropped the memory context in the sq thread. Since dropping
the context requires a runnable task state, we cannot reliably drop
it as part of our check-for-work loop in io_sq_thread(). Instead,
abstract out the mm acquire for the sq thread into a helper, and call
it from the async task work handler.
Cc: [email protected] # v5.7
Signed-off-by: Jens Axboe <[email protected]>
|
|
iopoll_completed
In io_complete_rw_iopoll(), stores to io_kiocb's result and iopoll
completed are two independent store operations, to ensure that once
iopoll_completed is ture and then req->result must been perceived by
the cpu executing io_do_iopoll(), proper memory barrier should be used.
And in io_do_iopoll(), we check whether req->result is EAGAIN, if it is,
we'll need to issue this io request using io-wq again. In order to just
issue a single smp_rmb() on the completion side, move the re-submit work
to io_iopoll_complete().
Cc: [email protected]
Signed-off-by: Xiaoguang Wang <[email protected]>
[axboe: don't set ->iopoll_completed for -EAGAIN retry]
Signed-off-by: Jens Axboe <[email protected]>
|
|
In IOPOLL mode, for EAGAIN error, we'll try to submit io request
again using io-wq, so don't fail rest of links if this io request
has links.
Cc: [email protected]
Signed-off-by: Xiaoguang Wang <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull dma-mapping fixes from Christoph Hellwig:
"Fixes for the SEV atomic pool (Geert Uytterhoeven and David Rientjes)"
* tag 'dma-mapping-5.8-3' of git://git.infradead.org/users/hch/dma-mapping:
dma-pool: decouple DMA_REMAP from DMA_COHERENT_POOL
dma-pool: fix too large DMA pools on medium memory size systems
|
|
Better describe what these functions do.
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Better describe what these functions do.
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
To pick the changes from:
b383a73f2b83 ("fs/ext4: Introduce DAX inode flag")
And silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
It causes various beautifiers for things like fspick, fsmount, etc (see
below) to get rebuilt, but this specific change doesn't make 'perf
trace' be capable of decoding anything new, as we still don't decode
what comes from ioctls, just its cmds.
Details about the update:
$ cp include/uapi/linux/fs.h tools/include/uapi/linux/fs.h
$ git diff
diff --git a/tools/include/uapi/linux/fs.h b/tools/include/uapi/linux/fs.h
index 379a612f8f1d..f44eb0a04afd 100644
--- a/tools/include/uapi/linux/fs.h
+++ b/tools/include/uapi/linux/fs.h
@@ -262,6 +262,7 @@ struct fsxattr {
#define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */
#define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
+#define FS_DAX_FL 0x02000000 /* Inode is DAX */
#define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */
#define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */
#define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */
$ m
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
INSTALL GTK UI
CC /tmp/build/perf/builtin-trace.o
DESCEND plugins
CC /tmp/build/perf/trace/beauty/fsmount.o
CC /tmp/build/perf/trace/beauty/fspick.o
CC /tmp/build/perf/trace/beauty/mount_flags.o
CC /tmp/build/perf/trace/beauty/move_mount.o
CC /tmp/build/perf/trace/beauty/renameat.o
CC /tmp/build/perf/trace/beauty/sync_file_range.o
INSTALL trace_plugins
LD /tmp/build/perf/trace/beauty/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
<SNIP>
Cc: Adrian Hunter <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Theodore Ts'o <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To get the changes in:
776f395004d8 ("vhost_vdpa: Support config interrupt in vdpa")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
This automatically picks the new ioctl introduced in the above patch,
making tools such as 'perf trace' aware of them and possibly allowing to
use the strings in filters, etc:
# perf trace -e ioctl --pid 7951
<SNIP>
0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0
370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0
<SNIP>
#
Details about the update:
$ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
--- tools/include/uapi/linux/vhost.h 2020-04-16 13:19:12.056763843 -0300
+++ include/uapi/linux/vhost.h 2020-06-17 10:04:20.532056428 -0300
@@ -15,6 +15,8 @@
#include <linux/types.h>
#include <linux/ioctl.h>
+#define VHOST_FILE_UNBIND -1
+
/* ioctls */
#define VHOST_VIRTIO 0xAF
@@ -140,4 +142,6 @@
/* Get the max ring size. */
#define VHOST_VDPA_GET_VRING_NUM _IOR(VHOST_VIRTIO, 0x76, __u16)
+/* Set event fd for config interrupt*/
+#define VHOST_VDPA_SET_CONFIG_CALL _IOW(VHOST_VIRTIO, 0x77, int)
#endif
$
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2020-06-17 10:15:35.123275966 -0300
+++ after 2020-06-17 10:15:51.812482117 -0300
@@ -27,6 +27,7 @@
[0x72] = "VDPA_SET_STATUS",
[0x74] = "VDPA_SET_CONFIG",
[0x75] = "VDPA_SET_VRING_ENABLE",
+ [0x77] = "VDPA_SET_CONFIG_CALL",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
$
This causes these parts to get rebuilt:
CC /tmp/build/perf/trace/beauty/ioctl.o
INSTALL trace_plugins
LD /tmp/build/perf/trace/beauty/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Zhu Lingshan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick up the changes in:
7e5b3c267d25 ("x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation")
Addressing these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
With this one will be able to use these new AMD MSRs in filters, by
name, e.g.:
# perf trace -e msr:* --filter "msr==IA32_MCU_OPT_CTRL"
^C#
Using -v we can see how it sets up the tracepoint filters, converting
from the string in the filter to the numeric value:
# perf trace -v -e msr:* --filter "msr==IA32_MCU_OPT_CTRL"
Using CPUID GenuineIntel-6-8E-A
0x123
New filter for msr:read_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
0x123
New filter for msr:write_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
0x123
New filter for msr:rdpmc: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
mmap size 528384B
^C#
The updating process shows how this affects tooling in more detail:
$ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
--- tools/arch/x86/include/asm/msr-index.h 2020-06-03 10:36:09.959910238 -0300
+++ arch/x86/include/asm/msr-index.h 2020-06-17 10:04:20.235052901 -0300
@@ -128,6 +128,10 @@
#define TSX_CTRL_RTM_DISABLE BIT(0) /* Disable RTM feature */
#define TSX_CTRL_CPUID_CLEAR BIT(1) /* Disable TSX enumeration */
+/* SRBDS support */
+#define MSR_IA32_MCU_OPT_CTRL 0x00000123
+#define RNGDS_MITG_DIS BIT(0)
+
#define MSR_IA32_SYSENTER_CS 0x00000174
#define MSR_IA32_SYSENTER_ESP 0x00000175
#define MSR_IA32_SYSENTER_EIP 0x00000176
$ set -o vi
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
--- before 2020-06-17 10:05:49.653114752 -0300
+++ after 2020-06-17 10:06:01.777258731 -0300
@@ -51,6 +51,7 @@
[0x0000011e] = "IA32_BBL_CR_CTL3",
[0x00000120] = "IDT_MCR_CTRL",
[0x00000122] = "IA32_TSX_CTRL",
+ [0x00000123] = "IA32_MCU_OPT_CTRL",
[0x00000140] = "MISC_FEATURES_ENABLES",
[0x00000174] = "IA32_SYSENTER_CS",
[0x00000175] = "IA32_SYSENTER_ESP",
$
The related change to cpu-features.h affects this:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
This shouldn't be affecting that 'perf bench' entry:
$ find tools/perf/ -type f | xargs grep SRBDS
$
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Gross <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To get some newer headers that got out of sync with the copies in tools/
so that we can try to have the tools/perf/ build clean for v5.8 with
fewer pull requests.
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fixes segmentation fault when trying to interpret zstd-compressed data
with perf script:
```
$ perf record -z ls
...
[ perf record: Captured and wrote 0,010 MB perf.data, compressed (original 0,001 MB, ratio is 2,190) ]
$ memcheck perf script
...
==67911== Invalid read of size 4
==67911== at 0x5568188: ZSTD_decompressStream (in /usr/lib/libzstd.so.1.4.5)
==67911== by 0x6E726B: zstd_decompress_stream (zstd.c:100)
==67911== by 0x65729C: perf_session__process_compressed_event (session.c:72)
==67911== by 0x6598E8: perf_session__process_user_event (session.c:1583)
==67911== by 0x65BA59: reader__process_events (session.c:2177)
==67911== by 0x65BA59: __perf_session__process_events (session.c:2234)
==67911== by 0x65BA59: perf_session__process_events (session.c:2267)
==67911== by 0x5A7397: __cmd_script (builtin-script.c:2447)
==67911== by 0x5A7397: cmd_script (builtin-script.c:3840)
==67911== by 0x5FE9D2: run_builtin (perf.c:312)
==67911== by 0x711627: handle_internal_command (perf.c:364)
==67911== by 0x711627: run_argv (perf.c:408)
==67911== by 0x711627: main (perf.c:538)
==67911== Address 0x71d8 is not stack'd, malloc'd or (recently) free'd
```
Signed-off-by: Milian Wolff <[email protected]>
Acked-by: Alexey Budankov <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
LPU-Reference: [email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Mostly for historical reasons, q->blk_trace is assigned through xchg()
and cmpxchg() atomic operations. Although this is correct, sparse
complains about this because it violates rcu annotations since commit
c780e86dd48e ("blktrace: Protect q->blk_trace with RCU") which started
to use rcu for accessing q->blk_trace. Furthermore there's no real need
for atomic operations anymore since all changes to q->blk_trace happen
under q->blk_trace_mutex and since it also makes more sense to check if
q->blk_trace is set with the mutex held earlier.
So let's just replace xchg() with rcu_replace_pointer() and cmpxchg()
with explicit check and rcu_assign_pointer(). This makes the code more
efficient and sparse happy.
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|