aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-02-09arm64: jump_label: use constraints "Si" instead of "i"Fangrui Song1-4/+8
The generic constraint "i" seems to be copied from x86 or arm (and with a redundant generic operand modifier "c"). It works with -fno-PIE but not with -fPIE/-fPIC in GCC's aarch64 port. The machine constraint "S", which denotes a symbol or label reference with a constant offset, supports PIC and has been available in GCC since 2012 and in Clang since 7.0. However, Clang before 19 does not support "S" on a symbol with a constant offset [1] (e.g. `static_key_false(&nf_hooks_needed[pf][hook])` in include/linux/netfilter.h), so we use "i" as a fallback. Suggested-by: Ard Biesheuvel <[email protected]> Signed-off-by: Fangrui Song <[email protected]> Link: https://github.com/llvm/llvm-project/pull/80255 [1] Acked-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2024-02-09arm64: fix typo in commentsSeongsu Park1-1/+1
fix typo in comments thath -> that Signed-off-by: Seongsu Park <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2024-02-09perf: CXL: fix mismatched cpmu event opcodeHojin Nam1-1/+1
S2M NDR BI-ConflictAck opcode is described as 4 in the CXL r3.0 3.3.9 Table 3.43. However, it is defined as 3 in macro definition. Fixes: 5d7107c72796 ("perf: CXL Performance Monitoring Unit driver") Signed-off-by: Hojin Nam <[email protected]> Reviewed-by: Jonathan Cameron <[email protected]> Link: https://lore.kernel.org/r/20240208013415epcms2p2904187c8a863f4d0d2adc980fb91a2dc@epcms2p2 Signed-off-by: Will Deacon <[email protected]>
2024-02-09arm64/signal: Don't assume that TIF_SVE means we saved SVE stateMark Brown2-3/+3
When we are in a syscall we will only save the FPSIMD subset even though the task still has access to the full register set, and on context switch we will only remove TIF_SVE when loading the register state. This means that the signal handling code should not assume that TIF_SVE means that the register state is stored in SVE format, it should instead check the format that was recorded during save. Fixes: 8c845e273104 ("arm64/sve: Leave SVE enabled on syscall if we don't context switch") Signed-off-by: Mark Brown <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2024-02-09x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6Aleksander Mazur1-1/+1
The kernel built with MCRUSOE is unbootable on Transmeta Crusoe. It shows the following error message: This kernel requires an i686 CPU, but only detected an i586 CPU. Unable to boot - please use a kernel appropriate for your CPU. Remove MCRUSOE from the condition introduced in commit in Fixes, effectively changing X86_MINIMUM_CPU_FAMILY back to 5 on that machine, which matches the CPU family given by CPUID. [ bp: Massage commit message. ] Fixes: 25d76ac88821 ("x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig") Signed-off-by: Aleksander Mazur <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Acked-by: H. Peter Anvin <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-02-09spi: spi-ppc4xx: include missing platform_device.hChristian Lamparter1-0/+1
the driver currently fails to compile on 6.8-rc3 due to: | spi-ppc4xx.c: In function ‘spi_ppc4xx_of_probe’: | @346:36: error: invalid use of undefined type ‘struct platform_device’ | 346 | struct device_node *np = op->dev.of_node; | | ^~ | ... (more similar errors) it was working with 6.7. Looks like it only needed the include and its compiling fine! Signed-off-by: Christian Lamparter <[email protected]> Link: https://lore.kernel.org/r/3eb3f9c4407ba99d1cd275662081e46b9e839173.1707490664.git.chunkeey@gmail.com Signed-off-by: Mark Brown <[email protected]>
2024-02-09ASoC: cs35l56: Remove default from IRQ1_CFG registerRichard Fitzgerald1-1/+0
The driver never uses the IRQ1_CFG register so there's no need to provide a default value. It's set as a readable register only for debugging through the regmap registers file. A system-specific firmware could overwrite this register with a non-default value. Therefore the driver can't hardcode what the initial value actually is. As the register is only for debugging the value can be left unknown until someone wants to read it through debugfs. Signed-off-by: Richard Fitzgerald <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-02-09ALSA: hda/cs35l56: select intended config FW_CS_DSPLukas Bulwahn1-2/+2
Commit 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") adds configs SND_HDA_SCODEC_CS35L56_{I2C,SPI}, which selects the non-existing config CS_DSP. Note the renaming in commit d7cfdf17cb9d ("firmware: cs_dsp: Rename KConfig symbol CS_DSP -> FW_CS_DSP"), though. Select the intended config FW_CS_DSP. This broken select command probably was not noticed as the configs also select SND_HDA_CS_DSP_CONTROLS and this then selects FW_CS_DSP. So, the select FW_CS_DSP could actually be dropped, but we will keep this redundancy in place as the author originally also intended to have this redundancy of selects in place. Fixes: 73cfbfa9caea ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier") Signed-off-by: Lukas Bulwahn <[email protected]> Reviewed-by: Simon Trimmer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-02-09tracing: Fix wasted memory in saved_cmdlines logicSteven Rostedt (Google)1-38/+37
While looking at improving the saved_cmdlines cache I found a huge amount of wasted memory that should be used for the cmdlines. The tracing data saves pids during the trace. At sched switch, if a trace occurred, it will save the comm of the task that did the trace. This is saved in a "cache" that maps pids to comms and exposed to user space via the /sys/kernel/tracing/saved_cmdlines file. Currently it only caches by default 128 comms. The structure that uses this creates an array to store the pids using PID_MAX_DEFAULT (which is usually set to 32768). This causes the structure to be of the size of 131104 bytes on 64 bit machines. In hex: 131104 = 0x20020, and since the kernel allocates generic memory in powers of two, the kernel would allocate 0x40000 or 262144 bytes to store this structure. That leaves 131040 bytes of wasted space. Worse, the structure points to an allocated array to store the comm names, which is 16 bytes times the amount of names to save (currently 128), which is 2048 bytes. Instead of allocating a separate array, make the structure end with a variable length string and use the extra space for that. This is similar to a recommendation that Linus had made about eventfs_inode names: https://lore.kernel.org/all/[email protected]/ Instead of allocating a separate string array to hold the saved comms, have the structure end with: char saved_cmdlines[]; and round up to the next power of two over sizeof(struct saved_cmdline_buffers) + num_cmdlines * TASK_COMM_LEN It will use this extra space for the saved_cmdline portion. Now, instead of saving only 128 comms by default, by using this wasted space at the end of the structure it can save over 8000 comms and even saves space by removing the need for allocating the other array. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: [email protected] Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: Vincent Donnefort <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Mete Durlu <[email protected]> Fixes: 939c7a4f04fcd ("tracing: Introduce saved_cmdlines_size file") Signed-off-by: Steven Rostedt (Google) <[email protected]>
2024-02-09of: property: Add in-ports/out-ports support to of_graph_get_port_parent()Saravana Kannan1-1/+3
Similar to the existing "ports" node name, coresight device tree bindings have added "in-ports" and "out-ports" as standard node names for a collection of ports. Add support for these name to of_graph_get_port_parent() so that remote-endpoint parsing can find the correct parent node for these coresight ports too. Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2024-02-09of: property: Improve finding the supplier of a remote-endpoint propertySaravana Kannan1-1/+11
After commit 4a032827daa8 ("of: property: Simplify of_link_to_phandle()"), remote-endpoint properties created a fwnode link from the consumer device to the supplier endpoint. This is a tiny bit inefficient (not buggy) when trying to create device links or detecting cycles. So, improve this the same way we improved finding the consumer of a remote-endpoint property. Fixes: 4a032827daa8 ("of: property: Simplify of_link_to_phandle()") Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2024-02-09of: property: Improve finding the consumer of a remote-endpoint propertySaravana Kannan1-37/+10
We have a more accurate function to find the right consumer of a remote-endpoint property instead of searching for a parent with compatible string property. So, use that instead. While at it, make the code to find the consumer a bit more flexible and based on the property being parsed. Fixes: f7514a663016 ("of: property: fw_devlink: Add support for remote-endpoint") Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2024-02-09Revert "usb: dwc3: Support EBC feature of DWC_usb31"Thinh Nguyen4-10/+0
This reverts commit 398aa9a7e77cf23c2a6f882ddd3dcd96f21771dc. The update to the gadget API to support EBC feature is incomplete. It's missing at least the following: * New usage documentation * Gadget capability check * Condition for the user to check how many and which endpoints can be used as "fifo_mode" * Description of how it can affect completed request (e.g. dwc3 won't update TRB on completion -- ie. how it can affect request's actual length report) Let's revert this until it's ready. Fixes: 398aa9a7e77c ("usb: dwc3: Support EBC feature of DWC_usb31") Signed-off-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/3042f847ff904b4dd4e4cf66a1b9df470e63439e.1707441690.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-09ftrace: Fix DIRECT_CALLS to use SAVE_REGS by defaultMasami Hiramatsu (Google)1-0/+10
The commit 60c8971899f3 ("ftrace: Make DIRECT_CALLS work WITH_ARGS and !WITH_REGS") changed DIRECT_CALLS to use SAVE_ARGS when there are multiple ftrace_ops at the same function, but since the x86 only support to jump to direct_call from ftrace_regs_caller, when we set the function tracer on the same target function on x86, ftrace-direct does not work as below (this actually works on arm64.) At first, insmod ftrace-direct.ko to put a direct_call on 'wake_up_process()'. # insmod kernel/samples/ftrace/ftrace-direct.ko # less trace ... <idle>-0 [006] ..s1. 564.686958: my_direct_func: waking up rcu_preempt-17 <idle>-0 [007] ..s1. 564.687836: my_direct_func: waking up kcompactd0-63 <idle>-0 [006] ..s1. 564.690926: my_direct_func: waking up rcu_preempt-17 <idle>-0 [006] ..s1. 564.696872: my_direct_func: waking up rcu_preempt-17 <idle>-0 [007] ..s1. 565.191982: my_direct_func: waking up kcompactd0-63 Setup a function filter to the 'wake_up_process' too, and enable it. # cd /sys/kernel/tracing/ # echo wake_up_process > set_ftrace_filter # echo function > current_tracer # less trace ... <idle>-0 [006] ..s3. 686.180972: wake_up_process <-call_timer_fn <idle>-0 [006] ..s3. 686.186919: wake_up_process <-call_timer_fn <idle>-0 [002] ..s3. 686.264049: wake_up_process <-call_timer_fn <idle>-0 [002] d.h6. 686.515216: wake_up_process <-kick_pool <idle>-0 [002] d.h6. 686.691386: wake_up_process <-kick_pool Then, only function tracer is shown on x86. But if you enable 'kprobe on ftrace' event (which uses SAVE_REGS flag) on the same function, it is shown again. # echo 'p wake_up_process' >> dynamic_events # echo 1 > events/kprobes/p_wake_up_process_0/enable # echo > trace # less trace ... <idle>-0 [006] ..s2. 2710.345919: p_wake_up_process_0: (wake_up_process+0x4/0x20) <idle>-0 [006] ..s3. 2710.345923: wake_up_process <-call_timer_fn <idle>-0 [006] ..s1. 2710.345928: my_direct_func: waking up rcu_preempt-17 <idle>-0 [006] ..s2. 2710.349931: p_wake_up_process_0: (wake_up_process+0x4/0x20) <idle>-0 [006] ..s3. 2710.349934: wake_up_process <-call_timer_fn <idle>-0 [006] ..s1. 2710.349937: my_direct_func: waking up rcu_preempt-17 To fix this issue, use SAVE_REGS flag for multiple ftrace_ops flag of direct_call by default. Link: https://lore.kernel.org/linux-trace-kernel/170484558617.178953.1590516949390270842.stgit@devnote2 Fixes: 60c8971899f3 ("ftrace: Make DIRECT_CALLS work WITH_ARGS and !WITH_REGS") Cc: [email protected] Cc: Florent Revest <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Tested-by: Mark Rutland <[email protected]> [arm64] Acked-by: Jiri Olsa <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2024-02-09RISC-V: KVM: Use correct restricted typesAndrew Jones1-8/+12
__le32 and __le64 types should be used with le32_to_cpu() and le64_to_cpu() and __user is needed for pointers referencing guest memory, as sparse helpfully points out. Fixes: e9f12b5fff8a ("RISC-V: KVM: Implement SBI STA extension") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Andrew Jones <[email protected]> Reviewed-by: Atish Patra <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2024-02-09RISC-V: paravirt: Use correct restricted typesAndrew Jones1-2/+2
__le32 and __le64 types should be used with le32_to_cpu() and le64_to_cpu(), as sparse helpfully points out. Fixes: fdf68acccfc6 ("RISC-V: paravirt: Implement steal-time support") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Andrew Jones <[email protected]> Reviewed-by: Atish Patra <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2024-02-09RISC-V: paravirt: steal_time should be staticAndrew Jones1-1/+1
steal_time is not used outside paravirt.c, make it static, as sparse suggested. Fixes: fdf68acccfc6 ("RISC-V: paravirt: Implement steal-time support") Signed-off-by: Andrew Jones <[email protected]> Reviewed-by: Atish Patra <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2024-02-08selftests: net: add more missing kernel configPaolo Abeni1-1/+5
The reuseport_addr_any.sh is currently skipping DCCP tests and pmtu.sh is skipping all the FOU/GUE related cases: add the missing options. Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/38d3ca7f909736c1aef56e6244d67c82a9bba6ff.1707326987.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08devlink: Fix command annotation documentationParav Pandit1-1/+1
Command example string is not read as command. Fix command annotation. Fixes: a8ce7b26a51e ("devlink: Expose port function commands to control migratable") Signed-off-by: Parav Pandit <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPYMagnus Karlsson1-3/+2
Do not report the XDP capability NETDEV_XDP_ACT_XSK_ZEROCOPY as the bonding driver does not support XDP and AF_XDP in zero-copy mode even if the real NIC drivers do. Note that the driver used to report everything as supported before a device was bonded. Instead of just masking out the zero-copy support from this, have the driver report that no XDP feature is supported until a real device is bonded. This seems to be more truthful as it is the real drivers that decide what XDP features are supported. Fixes: cb9e6e584d58 ("bonding: add xdp_features support") Reported-by: Prashant Batra <[email protected]> Link: https://lore.kernel.org/all/CAJ8uoz2ieZCopgqTvQ9ZY6xQgTbujmC6XkMTamhp68O-h_-rLg@mail.gmail.com/T/ Signed-off-by: Magnus Karlsson <[email protected]> Reviewed-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08net/handshake: Fix handshake_req_destroy_test1Chuck Lever1-1/+4
Recently, handshake_req_destroy_test1 started failing: Expected handshake_req_destroy_test == req, but handshake_req_destroy_test == 0000000000000000 req == 0000000060f99b40 not ok 11 req_destroy works This is because "sock_release(sock)" was replaced with "fput(filp)" to address a memory leak. Note that sock_release() is synchronous but fput() usually delays the final close and clean-up. The delay is not consequential in the other cases that were changed but handshake_req_destroy_test1 is testing that handshake_req_cancel() followed by closing the file actually does call the ->hp_destroy method. Thus the PTR_EQ test at the end has to be sure that the final close is complete before it checks the pointer. We cannot use a completion here because if ->hp_destroy is never called (ie, there is an API bug) then the test will hang. Reported by: Guenter Roeck <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/T/#mac5c6299f86799f1c71776f3a07f9c566c7c3c40 Fixes: 4a0f07d71b04 ("net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()") Signed-off-by: Chuck Lever <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Link: https://lore.kernel.org/r/170724699027.91401.7839730697326806733.stgit@oracle-102.nfsv4bat.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08net/mlx5: DPLL, Fix possible use after free after delayed work timer triggersJiri Pirko1-1/+1
I managed to hit following use after free warning recently: [ 2169.711665] ================================================================== [ 2169.714009] BUG: KASAN: slab-use-after-free in __run_timers.part.0+0x179/0x4c0 [ 2169.716293] Write of size 8 at addr ffff88812b326a70 by task swapper/4/0 [ 2169.719022] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.8.0-rc2jiri+ #2 [ 2169.720974] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2169.722457] Call Trace: [ 2169.722756] <IRQ> [ 2169.723024] dump_stack_lvl+0x58/0xb0 [ 2169.723417] print_report+0xc5/0x630 [ 2169.723807] ? __virt_addr_valid+0x126/0x2b0 [ 2169.724268] kasan_report+0xbe/0xf0 [ 2169.724667] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725116] ? __run_timers.part.0+0x179/0x4c0 [ 2169.725570] __run_timers.part.0+0x179/0x4c0 [ 2169.726003] ? call_timer_fn+0x320/0x320 [ 2169.726404] ? lock_downgrade+0x3a0/0x3a0 [ 2169.726820] ? kvm_clock_get_cycles+0x14/0x20 [ 2169.727257] ? ktime_get+0x92/0x150 [ 2169.727630] ? lapic_next_deadline+0x35/0x60 [ 2169.728069] run_timer_softirq+0x40/0x80 [ 2169.728475] __do_softirq+0x1a1/0x509 [ 2169.728866] irq_exit_rcu+0x95/0xc0 [ 2169.729241] sysvec_apic_timer_interrupt+0x6b/0x80 [ 2169.729718] </IRQ> [ 2169.729993] <TASK> [ 2169.730259] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 2169.730755] RIP: 0010:default_idle+0x13/0x20 [ 2169.731190] Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 9a 7f 1f 02 85 c0 7e 07 0f 00 2d cf 69 43 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 c0 93 04 00 [ 2169.732759] RSP: 0018:ffff888100dbfe10 EFLAGS: 00000242 [ 2169.733264] RAX: 0000000000000001 RBX: ffff888100d9c200 RCX: ffffffff8241bd62 [ 2169.733925] RDX: ffffed109a848b15 RSI: 0000000000000004 RDI: ffffffff8127ac55 [ 2169.734566] RBP: 0000000000000004 R08: 0000000000000000 R09: ffffed109a848b14 [ 2169.735200] R10: ffff8884d42458a3 R11: 000000000000ba7e R12: ffffffff83d7d3a0 [ 2169.735835] R13: 1ffff110201b7fc6 R14: 0000000000000000 R15: ffff888100d9c200 [ 2169.736478] ? ct_kernel_exit.constprop.0+0xa2/0xc0 [ 2169.736954] ? do_idle+0x285/0x290 [ 2169.737323] default_idle_call+0x63/0x90 [ 2169.737730] do_idle+0x285/0x290 [ 2169.738089] ? arch_cpu_idle_exit+0x30/0x30 [ 2169.738511] ? mark_held_locks+0x1a/0x80 [ 2169.738917] ? lockdep_hardirqs_on_prepare+0x12e/0x200 [ 2169.739417] cpu_startup_entry+0x30/0x40 [ 2169.739825] start_secondary+0x19a/0x1c0 [ 2169.740229] ? set_cpu_sibling_map+0xbd0/0xbd0 [ 2169.740673] secondary_startup_64_no_verify+0x15d/0x16b [ 2169.741179] </TASK> [ 2169.741686] Allocated by task 1098: [ 2169.742058] kasan_save_stack+0x1c/0x40 [ 2169.742456] kasan_save_track+0x10/0x30 [ 2169.742852] __kasan_kmalloc+0x83/0x90 [ 2169.743246] mlx5_dpll_probe+0xf5/0x3c0 [mlx5_dpll] [ 2169.743730] auxiliary_bus_probe+0x62/0xb0 [ 2169.744148] really_probe+0x127/0x590 [ 2169.744534] __driver_probe_device+0xd2/0x200 [ 2169.744973] device_driver_attach+0x6b/0xf0 [ 2169.745402] bind_store+0x90/0xe0 [ 2169.745761] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.746210] vfs_write+0x41f/0x790 [ 2169.746579] ksys_write+0xc7/0x160 [ 2169.746947] do_syscall_64+0x6f/0x140 [ 2169.747333] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.748049] Freed by task 1220: [ 2169.748393] kasan_save_stack+0x1c/0x40 [ 2169.748789] kasan_save_track+0x10/0x30 [ 2169.749188] kasan_save_free_info+0x3b/0x50 [ 2169.749621] poison_slab_object+0x106/0x180 [ 2169.750044] __kasan_slab_free+0x14/0x50 [ 2169.750451] kfree+0x118/0x330 [ 2169.750792] mlx5_dpll_remove+0xf5/0x110 [mlx5_dpll] [ 2169.751271] auxiliary_bus_remove+0x2e/0x40 [ 2169.751694] device_release_driver_internal+0x24b/0x2e0 [ 2169.752191] unbind_store+0xa6/0xb0 [ 2169.752563] kernfs_fop_write_iter+0x1df/0x2a0 [ 2169.753004] vfs_write+0x41f/0x790 [ 2169.753381] ksys_write+0xc7/0x160 [ 2169.753750] do_syscall_64+0x6f/0x140 [ 2169.754132] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 2169.754847] Last potentially related work creation: [ 2169.755315] kasan_save_stack+0x1c/0x40 [ 2169.755709] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.756165] __queue_work+0x382/0x8f0 [ 2169.756552] call_timer_fn+0x126/0x320 [ 2169.756941] __run_timers.part.0+0x2ea/0x4c0 [ 2169.757376] run_timer_softirq+0x40/0x80 [ 2169.757782] __do_softirq+0x1a1/0x509 [ 2169.758387] Second to last potentially related work creation: [ 2169.758924] kasan_save_stack+0x1c/0x40 [ 2169.759322] __kasan_record_aux_stack+0x9b/0xf0 [ 2169.759773] __queue_work+0x382/0x8f0 [ 2169.760156] call_timer_fn+0x126/0x320 [ 2169.760550] __run_timers.part.0+0x2ea/0x4c0 [ 2169.760978] run_timer_softirq+0x40/0x80 [ 2169.761381] __do_softirq+0x1a1/0x509 [ 2169.761998] The buggy address belongs to the object at ffff88812b326a00 which belongs to the cache kmalloc-256 of size 256 [ 2169.763061] The buggy address is located 112 bytes inside of freed 256-byte region [ffff88812b326a00, ffff88812b326b00) [ 2169.764346] The buggy address belongs to the physical page: [ 2169.764866] page:000000000f2b1e89 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12b324 [ 2169.765731] head:000000000f2b1e89 order:2 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 2169.766484] anon flags: 0x200000000000840(slab|head|node=0|zone=2) [ 2169.767048] page_type: 0xffffffff() [ 2169.767422] raw: 0200000000000840 ffff888100042b40 0000000000000000 dead000000000001 [ 2169.768183] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 2169.768899] page dumped because: kasan: bad access detected [ 2169.769649] Memory state around the buggy address: [ 2169.770116] ffff88812b326900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.770805] ffff88812b326980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.771485] >ffff88812b326a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.772173] ^ [ 2169.772787] ffff88812b326a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 2169.773477] ffff88812b326b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 2169.774160] ================================================================== [ 2169.774845] ================================================================== I didn't manage to reproduce it. Though the issue seems to be obvious. There is a chance that the mlx5_dpll_remove() calls cancel_delayed_work() when the work runs and manages to re-arm itself. In that case, after delay timer triggers next attempt to queue it, it works with freed memory. Fix this by using cancel_delayed_work_sync() instead which makes sure that work is done when it returns. Fixes: 496fd0a26bbf ("mlx5: Implement SyncE support using DPLL infrastructure") Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-08dpll: fix possible deadlock during netlink dump operationJiri Pirko4-24/+6
Recently, I've been hitting following deadlock warning during dpll pin dump: [52804.637962] ====================================================== [52804.638536] WARNING: possible circular locking dependency detected [52804.639111] 6.8.0-rc2jiri+ #1 Not tainted [52804.639529] ------------------------------------------------------ [52804.640104] python3/2984 is trying to acquire lock: [52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780 [52804.641417] but task is already holding lock: [52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20 [52804.642747] which lock already depends on the new lock. [52804.643551] the existing dependency chain (in reverse order) is: [52804.644259] -> #1 (dpll_lock){+.+.}-{3:3}: [52804.644836] lock_acquire+0x174/0x3e0 [52804.645271] __mutex_lock+0x119/0x1150 [52804.645723] dpll_lock_dumpit+0x13/0x20 [52804.646169] genl_start+0x266/0x320 [52804.646578] __netlink_dump_start+0x321/0x450 [52804.647056] genl_family_rcv_msg_dumpit+0x155/0x1e0 [52804.647575] genl_rcv_msg+0x1ed/0x3b0 [52804.648001] netlink_rcv_skb+0xdc/0x210 [52804.648440] genl_rcv+0x24/0x40 [52804.648831] netlink_unicast+0x2f1/0x490 [52804.649290] netlink_sendmsg+0x36d/0x660 [52804.649742] __sock_sendmsg+0x73/0xc0 [52804.650165] __sys_sendto+0x184/0x210 [52804.650597] __x64_sys_sendto+0x72/0x80 [52804.651045] do_syscall_64+0x6f/0x140 [52804.651474] entry_SYSCALL_64_after_hwframe+0x46/0x4e [52804.652001] -> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}: [52804.652650] check_prev_add+0x1ae/0x1280 [52804.653107] __lock_acquire+0x1ed3/0x29a0 [52804.653559] lock_acquire+0x174/0x3e0 [52804.653984] __mutex_lock+0x119/0x1150 [52804.654423] netlink_dump+0xb3/0x780 [52804.654845] __netlink_dump_start+0x389/0x450 [52804.655321] genl_family_rcv_msg_dumpit+0x155/0x1e0 [52804.655842] genl_rcv_msg+0x1ed/0x3b0 [52804.656272] netlink_rcv_skb+0xdc/0x210 [52804.656721] genl_rcv+0x24/0x40 [52804.657119] netlink_unicast+0x2f1/0x490 [52804.657570] netlink_sendmsg+0x36d/0x660 [52804.658022] __sock_sendmsg+0x73/0xc0 [52804.658450] __sys_sendto+0x184/0x210 [52804.658877] __x64_sys_sendto+0x72/0x80 [52804.659322] do_syscall_64+0x6f/0x140 [52804.659752] entry_SYSCALL_64_after_hwframe+0x46/0x4e [52804.660281] other info that might help us debug this: [52804.661077] Possible unsafe locking scenario: [52804.661671] CPU0 CPU1 [52804.662129] ---- ---- [52804.662577] lock(dpll_lock); [52804.662924] lock(nlk_cb_mutex-GENERIC); [52804.663538] lock(dpll_lock); [52804.664073] lock(nlk_cb_mutex-GENERIC); [52804.664490] The issue as follows: __netlink_dump_start() calls control->start(cb) with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken. Then nlk->cb_mutex is released and taken again in netlink_dump(), while dpll_lock still being held. That leads to ABBA deadlock when another CPU races with the same operation. Fix this by moving dpll_lock taking into dumpit() callback which ensures correct lock taking order. Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions") Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Arkadiusz Kubalewski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09Merge tag 'drm-msm-fixes-2024-02-07' of ↵Dave Airlie6-20/+22
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.8-rc4 DPU: - fix for kernel doc warnings and smatch warnings in dpu_encoder - fix for smatch warning in dpu_encoder - fix the bus bandwidth value for SDM670 DP: - fixes to handle unknown bpc case correctly for DP. The current code was spilling over into other bits of DP configuration register, had to be fixed to avoid the extra shifts which were causing the spill over - fix for MISC0 programming in DP driver to program the correct colorimetry value GPU: - dmabuf vmap fix - a610 UBWC corruption fix (incorrect hbb) - revert a commit that was making GPU recovery unreliable Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv+tb1+_cp7ftxcMZbbxE9810rvxeaC50eL=msQ+zkm0g@mail.gmail.com
2024-02-09Merge tag 'amd-drm-fixes-6.8-2024-02-08' of ↵Dave Airlie28-98/+220
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.8-2024-02-08: amdgpu: - Misc NULL/bounds check fixes - ODM pipe policy fix - Aborted suspend fixes - JPEG 4.0.5 fix - DCN 3.5 fixes - PSP fix - DP MST fix - Phantom pipe fix - VRAM vendor fix - Clang fix - SR-IOV fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-09Merge tag 'drm-intel-fixes-2024-02-08' of ↵Dave Airlie4-6/+5
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Just includes gvt-fixes-2024-02-05 Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-09Merge tag 'drm-xe-fixes-2024-02-08' of ↵Dave Airlie9-65/+57
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - Fix a loop in an error path - Fix a missing dma-fence reference - Fix a retry path on userptr REMAP - Workaround for a false gcc warning - Fix missing map of the usm batch buffer in the migrate vm. - Fix a memory leak. - Fix a bad assumption of used page size - Fix hitting a BUG() due to zero pages to map. - Remove some leftover async bind queue relics Signed-off-by: Dave Airlie <[email protected]> From: Thomas Hellstrom <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ZcS2LllawGifubsk@fedora
2024-02-09Merge tag 'drm-misc-fixes-2024-02-08' of ↵Dave Airlie9-58/+77
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A null pointer dereference fix for v3d, a TTM pool initialization fix, several fixes for nouveau around register size, DMA buffer leaks and API consistency, a multiple fixes for ivpu around MMU setup, initialization and firmware interactions. Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/4wsi2i6kgkqdu7nzp4g7hxasbswnrmc5cakgf5zzvnix53u7lr@4rmp7hwblow3
2024-02-08Merge tag 'net-6.8-rc4' of ↵Linus Torvalds130-481/+1104
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from WiFi and netfilter. Current release - regressions: - nic: intel: fix old compiler regressions - netfilter: ipset: missing gc cancellations fixed Current release - new code bugs: - netfilter: ctnetlink: fix filtering for zone 0 Previous releases - regressions: - core: fix from address in memcpy_to_iter_csum() - netfilter: nfnetlink_queue: un-break NF_REPEAT - af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC. - devlink: avoid potential loop in devlink_rel_nested_in_notify_work() - iwlwifi: - mvm: fix a battery life regression - fix double-free bug - mac80211: fix waiting for beacons logic - nic: nfp: flower: prevent re-adding mac index for bonded port Previous releases - always broken: - rxrpc: fix generation of serial numbers to skip zero - tipc: check the bearer type before calling tipc_udp_nl_bearer_add() - tunnels: fix out of bounds access when building IPv6 PMTU error - nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER missed - nic: atlantic: fix DMA mapping for PTP hwts ring Misc: - selftests: more fixes to deal with very slow hosts" * tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits) netfilter: nft_set_pipapo: remove scratch_aligned pointer netfilter: nft_set_pipapo: add helper to release pcpu scratch area netfilter: nft_set_pipapo: store index in scratch maps netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nfnetlink_queue: un-break NF_REPEAT netfilter: nf_tables: use timestamp to check for set element timeout netfilter: nft_ct: reject direction for ct id netfilter: ctnetlink: fix filtering for zone 0 s390/qeth: Fix potential loss of L3-IP@ in case of network issues netfilter: ipset: Missing gc cancellations fixed octeontx2-af: Initialize maps. net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio netfilter: nft_set_pipapo: remove static in nft_pipapo_get() netfilter: nft_compat: restrict match/target protocol to u16 netfilter: nft_compat: reject unused compat flag netfilter: nft_compat: narrow down revision to unsigned 8-bits net: intel: fix old compiler regressions MAINTAINERS: Maintainer change for rds selftests: cmsg_ipv6: repeat the exact packet ...
2024-02-08Merge tag 'pinctrl-v6.8-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fix from Linus Walleij: "A single fix for the AMD driver which affects developer laptops, the pinctrl/GPIO driver won't probe on some systems" * tag 'pinctrl-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: amd: Add IRQF_ONESHOT to the interrupt request
2024-02-08Merge tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme into block-6.8Jens Axboe4-23/+25
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.8 - Update a potentially stale firmware attribute (Maurizio) - Fixes for the recent verbose error logging (Keith, Chaitanya) - Protection information payload size fix for passthrough (Francis)" * tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme: nvme: use ns->head->pi_size instead of t10_pi_tuple structure size nvme-core: fix comment to reflect right functions nvme: move passthrough logging attribute to head nvme-host: fix the updating of the firmware version
2024-02-08virtio-blk: Ensure no requests in virtqueues before deleting vqs.Yi Sun1-3/+4
Ensure no remaining requests in virtqueues before resetting vdev and deleting virtqueues. Otherwise these requests will never be completed. It may cause the system to become unresponsive. Function blk_mq_quiesce_queue() can ensure that requests have become in_flight status, but it cannot guarantee that requests have been processed by the device. Virtqueues should never be deleted before all requests become complete status. Function blk_mq_freeze_queue() ensure that all requests in virtqueues become complete status. And no requests can enter in virtqueues. Signed-off-by: Yi Sun <[email protected]> Reviewed-by: Stefan Hajnoczi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2024-02-08docs: kernel_feat.py: fix build error for missing filesVegard Nossum1-1/+1
If the directory passed to the '.. kernel-feat::' directive does not exist or the get_feat.pl script does not find any files to extract features from, Sphinx will report the following error: Sphinx parallel build error: UnboundLocalError: local variable 'fname' referenced before assignment make[2]: *** [Documentation/Makefile:102: htmldocs] Error 2 This is due to how I changed the script in c48a7c44a1d0 ("docs: kernel_feat.py: fix potential command injection"). Before that, the filename passed along to self.nestedParse() in this case was weirdly just the whole get_feat.pl invocation. We can fix it by doing what kernel_abi.py does -- just pass self.arguments[0] as 'fname'. Fixes: c48a7c44a1d0 ("docs: kernel_feat.py: fix potential command injection") Cc: Justin Forbes <[email protected]> Cc: Salvatore Bonaccorso <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: [email protected] Signed-off-by: Vegard Nossum <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Corbet <[email protected]>
2024-02-08blk-iocost: Fix an UBSAN shift-out-of-bounds warningTejun Heo1-0/+7
When iocg_kick_delay() is called from a CPU different than the one which set the delay, @now may be in the past of @iocg->delay_at leading to the following warning: UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23 shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: <TASK> dump_stack_lvl+0x79/0xc0 __ubsan_handle_shift_out_of_bounds+0x2ab/0x300 iocg_kick_delay+0x222/0x230 ioc_rqos_merge+0x1d7/0x2c0 __rq_qos_merge+0x2c/0x80 bio_attempt_back_merge+0x83/0x190 blk_attempt_plug_merge+0x101/0x150 blk_mq_submit_bio+0x2b1/0x720 submit_bio_noacct_nocheck+0x320/0x3e0 __swap_writepage+0x2ab/0x9d0 The underflow itself doesn't really affect the behavior in any meaningful way; however, the past timestamp may exaggerate the delay amount calculated later in the code, which shouldn't be a material problem given the nature of the delay mechanism. If @now is in the past, this CPU is racing another CPU which recently set up the delay and there's nothing this CPU can contribute w.r.t. the delay. Let's bail early from iocg_kick_delay() in such cases. Reported-by: Breno Leitão <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Fixes: 5160a5a53c0c ("blk-iocost: implement delay adjustment hysteresis") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2024-02-08smb: client: set correct d_type for reparse points under DFS mountsPaulo Alcantara2-7/+14
Send query dir requests with an info level of SMB_FIND_FILE_FULL_DIRECTORY_INFO rather than SMB_FIND_FILE_DIRECTORY_INFO when the client is generating its own inode numbers (e.g. noserverino) so that reparse tags still can be parsed directly from the responses, but server won't send UniqueId (server inode number) Signed-off-by: Paulo Alcantara <[email protected]> Signed-off-by: Steve French <[email protected]>
2024-02-08smb3: add missing null server pointer checkSteve French1-1/+1
Address static checker warning in cifs_ses_get_chan_index(): warn: variable dereferenced before check 'server' To be consistent, and reduce risk, we should add another check for null server pointer. Fixes: 88675b22d34e ("cifs: do not search for channel if server is terminating") Reported-by: Dan Carpenter <[email protected]> Reviewed-by: Shyam Prasad N <[email protected]> Signed-off-by: Steve French <[email protected]>
2024-02-08Revert "kobject: Remove redundant checks for whether ktype is NULL"Greg Kroah-Hartman1-10/+14
This reverts commit 1b28cb81dab7c1eedc6034206f4e8d644046ad31. It is reported to cause problems, so revert it for now until the root cause can be found. Reported-by: kernel test robot <[email protected]> Fixes: 1b28cb81dab7 ("kobject: Remove redundant checks for whether ktype is NULL") Cc: Zhen Lei <[email protected]> Closes: https://lore.kernel.org/oe-lkp/[email protected] Link: https://lore.kernel.org/r/2024020849-consensus-length-6264@gregkh Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-02-08kprobes: Remove unnecessary initial values of variablesLi zeming1-2/+2
ri and sym is assigned first, so it does not need to initialize the assignment. Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Li zeming <[email protected]> Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2024-02-08tracing/probes: Fix to set arg size and fmt after setting type from BTFMasami Hiramatsu (Google)1-12/+13
Since the BTF type setting updates probe_arg::type, the type size calculation and setting print-fmt should be done after that. Without this fix, the argument size and print-fmt can be wrong. Link: https://lore.kernel.org/all/170602218196.215583.6417859469540955777.stgit@devnote2/ Fixes: b576e09701c7 ("tracing/probes: Support function parameters if BTF is available") Cc: [email protected] Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2024-02-08tracing/probes: Fix to show a parse error for bad type for $commMasami Hiramatsu (Google)2-3/+7
Fix to show a parse error for bad type (non-string) for $comm/$COMM and immediate-string. With this fix, error_log file shows appropriate error message as below. /sys/kernel/tracing # echo 'p vfs_read $comm:u32' >> kprobe_events sh: write error: Invalid argument /sys/kernel/tracing # echo 'p vfs_read \"hoge":u32' >> kprobe_events sh: write error: Invalid argument /sys/kernel/tracing # cat error_log [ 30.144183] trace_kprobe: error: $comm and immediate-string only accepts string type Command: p vfs_read $comm:u32 ^ [ 62.618500] trace_kprobe: error: $comm and immediate-string only accepts string type Command: p vfs_read \"hoge":u32 ^ Link: https://lore.kernel.org/all/170602215411.215583.2238016352271091852.stgit@devnote2/ Fixes: 3dd1f7f24f8c ("tracing: probeevent: Fix to make the type of $comm string") Cc: [email protected] Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
2024-02-08ASoC: SOF: ipc3-topology: Fix pipeline tear down logicRanjani Sridharan1-14/+41
With the change in the widget free logic to power down the cores only when the scheduler widgets are freed, we need to ensure that the scheduler widget is freed only after all the widgets associated with the scheduler are freed. This is to ensure that the secondary core that the scheduler is scheduled to run on is kept powered on until all widgets that need them are in use. While this works well for dynamic pipelines, in the case of static pipelines the current logic does not take this into account and frees all widgets in the order they occur in the widget_list. So, modify this to ensure that the scheduler widgets are freed only after all other types of widgets in the widget_list are freed. Link: https://github.com/thesofproject/linux/issues/4807 Fixes: 31ed8da1c8e5 ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores") Signed-off-by: Ranjani Sridharan <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-02-08ASoC: cs35l56: Fix deadlock in ASP1 mixer register initializationRichard Fitzgerald2-82/+73
Rewrite the handling of ASP1 TX mixer mux initialization to prevent a deadlock during component_remove(). The firmware can overwrite the ASP1 TX mixer registers with system-specific settings. This is mainly for hardware that uses the ASP as a chip-to-chip link controlled by the firmware. Because of this the driver cannot know the starting state of the ASP1 mixer muxes until the firmware has been downloaded and rebooted. The original workaround for this was to queue a work function from the dsp_work() job. This work then read the register values (populating the regmap cache the first time around) and then called snd_soc_dapm_mux_update_power(). The problem with this is that it was ultimately triggered by cs35l56_component_probe() queueing dsp_work, which meant that it would be running in parallel with the rest of the ASoC component and card initialization. To prevent accessing DAPM before it was fully initialized the work function took the card mutex. But this would deadlock if cs35l56_component_remove() was called before the work job had completed, because ASoC calls component_remove() with the card mutex held. This new version removes the work function. Instead the regmap cache and DAPM mux widgets are initialized the first time any of the associated ALSA controls is read or written. Signed-off-by: Richard Fitzgerald <[email protected]> Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-02-08wifi: iwlwifi: mvm: fix a crash when we run out of stationsEmmanuel Grumbach2-0/+7
A DoS tool that injects loads of authentication frames made our AP crash. The iwl_mvm_is_dup() function couldn't find the per-queue dup_data which was not allocated. The root cause for that is that we ran out of stations in the firmware and we didn't really add the station to the firmware, yet we didn't return an error to mac80211. Mac80211 was thinking that we have the station and because of that, sta_info::uploaded was set to 1. This allowed ieee80211_find_sta_by_ifaddr() to return a valid station object, but that ieee80211_sta didn't have any iwl_mvm_sta object initialized and that caused the crash mentioned earlier when we got Rx on that station. Cc: [email protected] Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240206175739.1f76c44b2486.I6a00955e2842f15f0a089db2f834adb9d10fbe35@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-02-08wifi: iwlwifi: uninitialized variable in iwl_acpi_get_ppag_table()Dan Carpenter1-0/+3
This is an error path and Smatch complains that "tbl_rev" is uninitialized on this path. All the other functions follow this same patter where they set the error code and goto out_free so that's probably what was intended here as well. Fixes: e8e10a37c51c ("iwlwifi: acpi: move ppag code from mvm to fw/acpi") Signed-off-by: Dan Carpenter <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2024-02-08wifi: iwlwifi: Fix some error codesDan Carpenter1-6/+6
This saves the error as PTR_ERR(wifi_pkg). The problem is that "wifi_pkg" is a valid pointer, not an error pointer. Set the error code to -EINVAL instead. Fixes: 2a8084147bff ("iwlwifi: acpi: support reading and storing WRDS revision 1 and 2") Signed-off-by: Dan Carpenter <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2024-02-08wifi: iwlwifi: clear link_id in time_eventMiri Korenblit1-1/+2
Before sending a SESSION PROTECTION cmd the driver checks if the link_id indicated in the time event (and for which the cmd will be sent) is valid and exists. Clear the te_data::link_id when FW notifies that a session protection ended, so the check will actually fail when it should. Fixes: 135065837310 ("wifi: iwlwifi: support link_id in SESSION_PROTECTION cmd") Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240204235836.c64a6b3606c2.I35cdc08e8a3be282563163690f8ca3edb51a3854@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-02-08wifi: iwlwifi: mvm: use correct address 3 in A-MSDUDaniel Gabay1-10/+59
As described in IEEE sta 802.11-2020, table 9-30 (Address field contents), A-MSDU address 3 should contain the BSSID address. In TX_CMD we copy the MAC header from skb, and skb address 3 holds the destination address, but it may not be identical to the BSSID. Using the wrong destination address appears to work with (most) receivers without MLO, but in MLO some devices are checking for it carefully, perhaps as a consequence of link to MLD address translation. Replace address 3 in the TX_CMD MAC header with the correct address while retaining the skb address 3 unchanged. This ensures that skb address 3 will be utilized later for constructing the A-MSDU subframes. Note that we fill in the MLD address, but the firmware will do the necessary translation to link address after encryption. Signed-off-by: Daniel Gabay <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240204235836.4583a1bf9188.I3f8e7892bdf8f86b4daa28453771a8c9817b2416@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-02-08wifi: mac80211: reload info pointer in ieee80211_tx_dequeue()Johannes Berg1-2/+3
This pointer can change here since the SKB can change, so we actually later open-coded IEEE80211_SKB_CB() again. Reload the pointer where needed, so the monitor-mode case using it gets fixed, and then use info-> later as well. Cc: [email protected] Fixes: 531682159092 ("mac80211: fix VLAN handling with TXQs") Link: https://msgid.link/20240131164910.b54c28d583bc.I29450cec84ea6773cff5d9c16ff92b836c331471@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-02-08Merge tag 'nf-24-02-08' of ↵Paolo Abeni15-102/+202
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Narrow down target/match revision to u8 in nft_compat. 2) Bail out with unused flags in nft_compat. 3) Restrict layer 4 protocol to u16 in nft_compat. 4) Remove static in pipapo get command that slipped through when reducing set memory footprint. 5) Follow up incremental fix for the ipset performance regression, this includes the missing gc cancellation, from Jozsef Kadlecsik. 6) Allow to filter by zone 0 in ctnetlink, do not interpret zone 0 as no filtering, from Felix Huettner. 7) Reject direction for NFT_CT_ID. 8) Use timestamp to check for set element expiration while transaction is handled to prevent garbage collection from removing set elements that were just added by this transaction. Packet path and netlink dump/get path still use current time to check for expiration. 9) Restore NF_REPEAT in nfnetlink_queue, from Florian Westphal. 10) map_index needs to be percpu and per-set, not just percpu. At this time its possible for a pipapo set to fill the all-zero part with ones and take the 'might have bits set' as 'start-from-zero' area. From Florian Westphal. This includes three patches: - Change scratchpad area to a structure that provides space for a per-set-and-cpu toggle and uses it of the percpu one. - Add a new free helper to prepare for the next patch. - Remove the scratch_aligned pointer and makes AVX2 implementation use the exact same memory addresses for read/store of the matching state. netfilter pull request 24-02-08 * tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_set_pipapo: remove scratch_aligned pointer netfilter: nft_set_pipapo: add helper to release pcpu scratch area netfilter: nft_set_pipapo: store index in scratch maps netfilter: nft_set_rbtree: skip end interval element from gc netfilter: nfnetlink_queue: un-break NF_REPEAT netfilter: nf_tables: use timestamp to check for set element timeout netfilter: nft_ct: reject direction for ct id netfilter: ctnetlink: fix filtering for zone 0 netfilter: ipset: Missing gc cancellations fixed netfilter: nft_set_pipapo: remove static in nft_pipapo_get() netfilter: nft_compat: restrict match/target protocol to u16 netfilter: nft_compat: reject unused compat flag netfilter: nft_compat: narrow down revision to unsigned 8-bits ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-02-08netfilter: nft_set_pipapo: remove scratch_aligned pointerFlorian Westphal3-39/+10
use ->scratch for both avx2 and the generic implementation. After previous change the scratch->map member is always aligned properly for AVX2, so we can just use scratch->map in AVX2 too. The alignoff delta is stored in the scratchpad so we can reconstruct the correct address to free the area again. Fixes: 7400b063969b ("nft_set_pipapo: Introduce AVX2-based lookup implementation") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.