diff options
Diffstat (limited to 'tools')
28 files changed, 2318 insertions, 350 deletions
diff --git a/tools/include/linux/spinlock.h b/tools/include/linux/spinlock.h index 4ed569fcb139..b21b586b9854 100644 --- a/tools/include/linux/spinlock.h +++ b/tools/include/linux/spinlock.h @@ -7,6 +7,7 @@ #define spinlock_t pthread_mutex_t #define DEFINE_SPINLOCK(x) pthread_mutex_t x = PTHREAD_MUTEX_INITIALIZER; +#define __SPIN_LOCK_UNLOCKED(x) (pthread_mutex_t)PTHREAD_MUTEX_INITIALIZER #define spin_lock_irqsave(x, f) (void)f, pthread_mutex_lock(x) #define spin_unlock_irqrestore(x, f) (void)f, pthread_mutex_unlock(x) diff --git a/tools/testing/ktest/config-bisect.pl b/tools/testing/ktest/config-bisect.pl new file mode 100755 index 000000000000..b28feea7c363 --- /dev/null +++ b/tools/testing/ktest/config-bisect.pl @@ -0,0 +1,770 @@ +#!/usr/bin/perl -w +# +# Copyright 2015 - Steven Rostedt, Red Hat Inc. +# Copyright 2017 - Steven Rostedt, VMware, Inc. +# +# Licensed under the terms of the GNU GPL License version 2 +# + +# usage: +# config-bisect.pl [options] good-config bad-config [good|bad] +# + +# Compares a good config to a bad config, then takes half of the diffs +# and produces a config that is somewhere between the good config and +# the bad config. That is, the resulting config will start with the +# good config and will try to make half of the differences of between +# the good and bad configs match the bad config. It tries because of +# dependencies between the two configs it may not be able to change +# exactly half of the configs that are different between the two config +# files. + +# Here's a normal way to use it: +# +# $ cd /path/to/linux/kernel +# $ config-bisect.pl /path/to/good/config /path/to/bad/config + +# This will now pull in good config (blowing away .config in that directory +# so do not make that be one of the good or bad configs), and then +# build the config with "make oldconfig" to make sure it matches the +# current kernel. It will then store the configs in that result for +# the good config. It does the same for the bad config as well. +# The algorithm will run, merging half of the differences between +# the two configs and building them with "make oldconfig" to make sure +# the result changes (dependencies may reset changes the tool had made). +# It then copies the result of its good config to /path/to/good/config.tmp +# and the bad config to /path/to/bad/config.tmp (just appends ".tmp" to the +# files passed in). And the ".config" that you should test will be in +# directory + +# After the first run, determine if the result is good or bad then +# run the same command appending the result + +# For good results: +# $ config-bisect.pl /path/to/good/config /path/to/bad/config good + +# For bad results: +# $ config-bisect.pl /path/to/good/config /path/to/bad/config bad + +# Do not change the good-config or bad-config, config-bisect.pl will +# copy the good-config to a temp file with the same name as good-config +# but with a ".tmp" after it. It will do the same with the bad-config. + +# If "good" or "bad" is not stated at the end, it will copy the good and +# bad configs to the .tmp versions. If a .tmp version already exists, it will +# warn before writing over them (-r will not warn, and just write over them). +# If the last config is labeled "good", then it will copy it to the good .tmp +# version. If the last config is labeled "bad", it will copy it to the bad +# .tmp version. It will continue this until it can not merge the two any more +# without the result being equal to either the good or bad .tmp configs. + +my $start = 0; +my $val = ""; + +my $pwd = `pwd`; +chomp $pwd; +my $tree = $pwd; +my $build; + +my $output_config; +my $reset_bisect; + +sub usage { + print << "EOF" + +usage: config-bisect.pl [-l linux-tree][-b build-dir] good-config bad-config [good|bad] + -l [optional] define location of linux-tree (default is current directory) + -b [optional] define location to build (O=build-dir) (default is linux-tree) + good-config the config that is considered good + bad-config the config that does not work + "good" add this if the last run produced a good config + "bad" add this if the last run produced a bad config + If "good" or "bad" is not specified, then it is the start of a new bisect + + Note, each run will create copy of good and bad configs with ".tmp" appended. + +EOF +; + + exit(-1); +} + +sub doprint { + print @_; +} + +sub dodie { + doprint "CRITICAL FAILURE... ", @_, "\n"; + + die @_, "\n"; +} + +sub expand_path { + my ($file) = @_; + + if ($file =~ m,^/,) { + return $file; + } + return "$pwd/$file"; +} + +sub read_prompt { + my ($cancel, $prompt) = @_; + + my $ans; + + for (;;) { + if ($cancel) { + print "$prompt [y/n/C] "; + } else { + print "$prompt [y/N] "; + } + $ans = <STDIN>; + chomp $ans; + if ($ans =~ /^\s*$/) { + if ($cancel) { + $ans = "c"; + } else { + $ans = "n"; + } + } + last if ($ans =~ /^y$/i || $ans =~ /^n$/i); + if ($cancel) { + last if ($ans =~ /^c$/i); + print "Please answer either 'y', 'n' or 'c'.\n"; + } else { + print "Please answer either 'y' or 'n'.\n"; + } + } + if ($ans =~ /^c/i) { + exit; + } + if ($ans !~ /^y$/i) { + return 0; + } + return 1; +} + +sub read_yn { + my ($prompt) = @_; + + return read_prompt 0, $prompt; +} + +sub read_ync { + my ($prompt) = @_; + + return read_prompt 1, $prompt; +} + +sub run_command { + my ($command, $redirect) = @_; + my $start_time; + my $end_time; + my $dord = 0; + my $pid; + + $start_time = time; + + doprint("$command ... "); + + $pid = open(CMD, "$command 2>&1 |") or + dodie "unable to exec $command"; + + if (defined($redirect)) { + open (RD, ">$redirect") or + dodie "failed to write to redirect $redirect"; + $dord = 1; + } + + while (<CMD>) { + print RD if ($dord); + } + + waitpid($pid, 0); + my $failed = $?; + + close(CMD); + close(RD) if ($dord); + + $end_time = time; + my $delta = $end_time - $start_time; + + if ($delta == 1) { + doprint "[1 second] "; + } else { + doprint "[$delta seconds] "; + } + + if ($failed) { + doprint "FAILED!\n"; + } else { + doprint "SUCCESS\n"; + } + + return !$failed; +} + +###### CONFIG BISECT ###### + +# config_ignore holds the configs that were set (or unset) for +# a good config and we will ignore these configs for the rest +# of a config bisect. These configs stay as they were. +my %config_ignore; + +# config_set holds what all configs were set as. +my %config_set; + +# config_off holds the set of configs that the bad config had disabled. +# We need to record them and set them in the .config when running +# olddefconfig, because olddefconfig keeps the defaults. +my %config_off; + +# config_off_tmp holds a set of configs to turn off for now +my @config_off_tmp; + +# config_list is the set of configs that are being tested +my %config_list; +my %null_config; + +my %dependency; + +my $make; + +sub make_oldconfig { + + if (!run_command "$make olddefconfig") { + # Perhaps olddefconfig doesn't exist in this version of the kernel + # try oldnoconfig + doprint "olddefconfig failed, trying make oldnoconfig\n"; + if (!run_command "$make oldnoconfig") { + doprint "oldnoconfig failed, trying yes '' | make oldconfig\n"; + # try a yes '' | oldconfig + run_command "yes '' | $make oldconfig" or + dodie "failed make config oldconfig"; + } + } +} + +sub assign_configs { + my ($hash, $config) = @_; + + doprint "Reading configs from $config\n"; + + open (IN, $config) + or dodie "Failed to read $config"; + + while (<IN>) { + chomp; + if (/^((CONFIG\S*)=.*)/) { + ${$hash}{$2} = $1; + } elsif (/^(# (CONFIG\S*) is not set)/) { + ${$hash}{$2} = $1; + } + } + + close(IN); +} + +sub process_config_ignore { + my ($config) = @_; + + assign_configs \%config_ignore, $config; +} + +sub get_dependencies { + my ($config) = @_; + + my $arr = $dependency{$config}; + if (!defined($arr)) { + return (); + } + + my @deps = @{$arr}; + + foreach my $dep (@{$arr}) { + print "ADD DEP $dep\n"; + @deps = (@deps, get_dependencies $dep); + } + + return @deps; +} + +sub save_config { + my ($pc, $file) = @_; + + my %configs = %{$pc}; + + doprint "Saving configs into $file\n"; + + open(OUT, ">$file") or dodie "Can not write to $file"; + + foreach my $config (keys %configs) { + print OUT "$configs{$config}\n"; + } + close(OUT); +} + +sub create_config { + my ($name, $pc) = @_; + + doprint "Creating old config from $name configs\n"; + + save_config $pc, $output_config; + + make_oldconfig; +} + +# compare two config hashes, and return configs with different vals. +# It returns B's config values, but you can use A to see what A was. +sub diff_config_vals { + my ($pa, $pb) = @_; + + # crappy Perl way to pass in hashes. + my %a = %{$pa}; + my %b = %{$pb}; + + my %ret; + + foreach my $item (keys %a) { + if (defined($b{$item}) && $b{$item} ne $a{$item}) { + $ret{$item} = $b{$item}; + } + } + + return %ret; +} + +# compare two config hashes and return the configs in B but not A +sub diff_configs { + my ($pa, $pb) = @_; + + my %ret; + + # crappy Perl way to pass in hashes. + my %a = %{$pa}; + my %b = %{$pb}; + + foreach my $item (keys %b) { + if (!defined($a{$item})) { + $ret{$item} = $b{$item}; + } + } + + return %ret; +} + +# return if two configs are equal or not +# 0 is equal +1 b has something a does not +# +1 if a and b have a different item. +# -1 if a has something b does not +sub compare_configs { + my ($pa, $pb) = @_; + + my %ret; + + # crappy Perl way to pass in hashes. + my %a = %{$pa}; + my %b = %{$pb}; + + foreach my $item (keys %b) { + if (!defined($a{$item})) { + return 1; + } + if ($a{$item} ne $b{$item}) { + return 1; + } + } + + foreach my $item (keys %a) { + if (!defined($b{$item})) { + return -1; + } + } + + return 0; +} + +sub process_failed { + my ($config) = @_; + + doprint "\n\n***************************************\n"; + doprint "Found bad config: $config\n"; + doprint "***************************************\n\n"; +} + +sub process_new_config { + my ($tc, $nc, $gc, $bc) = @_; + + my %tmp_config = %{$tc}; + my %good_configs = %{$gc}; + my %bad_configs = %{$bc}; + + my %new_configs; + + my $runtest = 1; + my $ret; + + create_config "tmp_configs", \%tmp_config; + assign_configs \%new_configs, $output_config; + + $ret = compare_configs \%new_configs, \%bad_configs; + if (!$ret) { + doprint "New config equals bad config, try next test\n"; + $runtest = 0; + } + + if ($runtest) { + $ret = compare_configs \%new_configs, \%good_configs; + if (!$ret) { + doprint "New config equals good config, try next test\n"; + $runtest = 0; + } + } + + %{$nc} = %new_configs; + + return $runtest; +} + +sub convert_config { + my ($config) = @_; + + if ($config =~ /^# (.*) is not set/) { + $config = "$1=n"; + } + + $config =~ s/^CONFIG_//; + return $config; +} + +sub print_config { + my ($sym, $config) = @_; + + $config = convert_config $config; + doprint "$sym$config\n"; +} + +sub print_config_compare { + my ($good_config, $bad_config) = @_; + + $good_config = convert_config $good_config; + $bad_config = convert_config $bad_config; + + my $good_value = $good_config; + my $bad_value = $bad_config; + $good_value =~ s/(.*)=//; + my $config = $1; + + $bad_value =~ s/.*=//; + + doprint " $config $good_value -> $bad_value\n"; +} + +# Pass in: +# $phalf: half of the configs names you want to add +# $oconfigs: The orginial configs to start with +# $sconfigs: The source to update $oconfigs with (from $phalf) +# $which: The name of which half that is updating (top / bottom) +# $type: The name of the source type (good / bad) +sub make_half { + my ($phalf, $oconfigs, $sconfigs, $which, $type) = @_; + + my @half = @{$phalf}; + my %orig_configs = %{$oconfigs}; + my %source_configs = %{$sconfigs}; + + my %tmp_config = %orig_configs; + + doprint "Settings bisect with $which half of $type configs:\n"; + foreach my $item (@half) { + doprint "Updating $item to $source_configs{$item}\n"; + $tmp_config{$item} = $source_configs{$item}; + } + + return %tmp_config; +} + +sub run_config_bisect { + my ($pgood, $pbad) = @_; + + my %good_configs = %{$pgood}; + my %bad_configs = %{$pbad}; + + my %diff_configs = diff_config_vals \%good_configs, \%bad_configs; + my %b_configs = diff_configs \%good_configs, \%bad_configs; + my %g_configs = diff_configs \%bad_configs, \%good_configs; + + # diff_arr is what is in both good and bad but are different (y->n) + my @diff_arr = keys %diff_configs; + my $len_diff = $#diff_arr + 1; + + # b_arr is what is in bad but not in good (has depends) + my @b_arr = keys %b_configs; + my $len_b = $#b_arr + 1; + + # g_arr is what is in good but not in bad + my @g_arr = keys %g_configs; + my $len_g = $#g_arr + 1; + + my $runtest = 0; + my %new_configs; + my $ret; + + # Look at the configs that are different between good and bad. + # This does not include those that depend on other configs + # (configs depending on other configs that are not set would + # not show up even as a "# CONFIG_FOO is not set" + + + doprint "# of configs to check: $len_diff\n"; + doprint "# of configs showing only in good: $len_g\n"; + doprint "# of configs showing only in bad: $len_b\n"; + + if ($len_diff > 0) { + # Now test for different values + + doprint "Configs left to check:\n"; + doprint " Good Config\t\t\tBad Config\n"; + doprint " -----------\t\t\t----------\n"; + foreach my $item (@diff_arr) { + doprint " $good_configs{$item}\t$bad_configs{$item}\n"; + } + + my $half = int($#diff_arr / 2); + my @tophalf = @diff_arr[0 .. $half]; + + doprint "Set tmp config to be good config with some bad config values\n"; + + my %tmp_config = make_half \@tophalf, \%good_configs, + \%bad_configs, "top", "bad"; + + $runtest = process_new_config \%tmp_config, \%new_configs, + \%good_configs, \%bad_configs; + + if (!$runtest) { + doprint "Set tmp config to be bad config with some good config values\n"; + + my %tmp_config = make_half \@tophalf, \%bad_configs, + \%good_configs, "top", "good"; + + $runtest = process_new_config \%tmp_config, \%new_configs, + \%good_configs, \%bad_configs; + } + } + + if (!$runtest && $len_diff > 0) { + # do the same thing, but this time with bottom half + + my $half = int($#diff_arr / 2); + my @bottomhalf = @diff_arr[$half+1 .. $#diff_arr]; + + doprint "Set tmp config to be good config with some bad config values\n"; + + my %tmp_config = make_half \@bottomhalf, \%good_configs, + \%bad_configs, "bottom", "bad"; + + $runtest = process_new_config \%tmp_config, \%new_configs, + \%good_configs, \%bad_configs; + + if (!$runtest) { + doprint "Set tmp config to be bad config with some good config values\n"; + + my %tmp_config = make_half \@bottomhalf, \%bad_configs, + \%good_configs, "bottom", "good"; + + $runtest = process_new_config \%tmp_config, \%new_configs, + \%good_configs, \%bad_configs; + } + } + + if ($runtest) { + make_oldconfig; + doprint "READY TO TEST .config IN $build\n"; + return 0; + } + + doprint "\n%%%%%%%% FAILED TO FIND SINGLE BAD CONFIG %%%%%%%%\n"; + doprint "Hmm, can't make any more changes without making good == bad?\n"; + doprint "Difference between good (+) and bad (-)\n"; + + foreach my $item (keys %bad_configs) { + if (!defined($good_configs{$item})) { + print_config "-", $bad_configs{$item}; + } + } + + foreach my $item (keys %good_configs) { + next if (!defined($bad_configs{$item})); + if ($good_configs{$item} ne $bad_configs{$item}) { + print_config_compare $good_configs{$item}, $bad_configs{$item}; + } + } + + foreach my $item (keys %good_configs) { + if (!defined($bad_configs{$item})) { + print_config "+", $good_configs{$item}; + } + } + return -1; +} + +sub config_bisect { + my ($good_config, $bad_config) = @_; + my $ret; + + my %good_configs; + my %bad_configs; + my %tmp_configs; + + doprint "Run good configs through make oldconfig\n"; + assign_configs \%tmp_configs, $good_config; + create_config "$good_config", \%tmp_configs; + assign_configs \%good_configs, $output_config; + + doprint "Run bad configs through make oldconfig\n"; + assign_configs \%tmp_configs, $bad_config; + create_config "$bad_config", \%tmp_configs; + assign_configs \%bad_configs, $output_config; + + save_config \%good_configs, $good_config; + save_config \%bad_configs, $bad_config; + + return run_config_bisect \%good_configs, \%bad_configs; +} + +while ($#ARGV >= 0) { + if ($ARGV[0] !~ m/^-/) { + last; + } + my $opt = shift @ARGV; + + if ($opt eq "-b") { + $val = shift @ARGV; + if (!defined($val)) { + die "-b requires value\n"; + } + $build = $val; + } + + elsif ($opt eq "-l") { + $val = shift @ARGV; + if (!defined($val)) { + die "-l requires value\n"; + } + $tree = $val; + } + + elsif ($opt eq "-r") { + $reset_bisect = 1; + } + + elsif ($opt eq "-h") { + usage; + } + + else { + die "Unknow option $opt\n"; + } +} + +$build = $tree if (!defined($build)); + +$tree = expand_path $tree; +$build = expand_path $build; + +if ( ! -d $tree ) { + die "$tree not a directory\n"; +} + +if ( ! -d $build ) { + die "$build not a directory\n"; +} + +usage if $#ARGV < 1; + +if ($#ARGV == 1) { + $start = 1; +} elsif ($#ARGV == 2) { + $val = $ARGV[2]; + if ($val ne "good" && $val ne "bad") { + die "Unknown command '$val', bust be either \"good\" or \"bad\"\n"; + } +} else { + usage; +} + +my $good_start = expand_path $ARGV[0]; +my $bad_start = expand_path $ARGV[1]; + +my $good = "$good_start.tmp"; +my $bad = "$bad_start.tmp"; + +$make = "make"; + +if ($build ne $tree) { + $make = "make O=$build" +} + +$output_config = "$build/.config"; + +if ($start) { + if ( ! -f $good_start ) { + die "$good_start not found\n"; + } + if ( ! -f $bad_start ) { + die "$bad_start not found\n"; + } + if ( -f $good || -f $bad ) { + my $p = ""; + + if ( -f $good ) { + $p = "$good exists\n"; + } + + if ( -f $bad ) { + $p = "$p$bad exists\n"; + } + + if (!defined($reset_bisect)) { + if (!read_yn "${p}Overwrite and start new bisect anyway?") { + exit (-1); + } + } + } + run_command "cp $good_start $good" or die "failed to copy to $good\n"; + run_command "cp $bad_start $bad" or die "faield to copy to $bad\n"; +} else { + if ( ! -f $good ) { + die "Can not find file $good\n"; + } + if ( ! -f $bad ) { + die "Can not find file $bad\n"; + } + if ($val eq "good") { + run_command "cp $output_config $good" or die "failed to copy $config to $good\n"; + } elsif ($val eq "bad") { + run_command "cp $output_config $bad" or die "failed to copy $config to $bad\n"; + } +} + +chdir $tree || die "can't change directory to $tree"; + +my $ret = config_bisect $good, $bad; + +if (!$ret) { + exit(0); +} + +if ($ret > 0) { + doprint "Cleaning temp files\n"; + run_command "rm $good"; + run_command "rm $bad"; + exit(1); +} else { + doprint "See good and bad configs for details:\n"; + doprint "good: $good\n"; + doprint "bad: $bad\n"; + doprint "%%%%%%%% FAILED TO FIND SINGLE BAD CONFIG %%%%%%%%\n"; +} +exit(2); diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 8809f244bb7c..87af8a68ab25 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -10,6 +10,7 @@ use Fcntl qw(F_GETFL F_SETFL O_NONBLOCK); use File::Path qw(mkpath); use File::Copy qw(cp); use FileHandle; +use FindBin; my $VERSION = "0.2"; @@ -22,6 +23,11 @@ my %evals; #default opts my %default = ( + "MAILER" => "sendmail", # default mailer + "EMAIL_ON_ERROR" => 1, + "EMAIL_WHEN_FINISHED" => 1, + "EMAIL_WHEN_CANCELED" => 0, + "EMAIL_WHEN_STARTED" => 0, "NUM_TESTS" => 1, "TEST_TYPE" => "build", "BUILD_TYPE" => "randconfig", @@ -59,6 +65,7 @@ my %default = ( "GRUB_REBOOT" => "grub2-reboot", "SYSLINUX" => "extlinux", "SYSLINUX_PATH" => "/boot/extlinux", + "CONNECT_TIMEOUT" => 25, # required, and we will ask users if they don't have them but we keep the default # value something that is common. @@ -163,6 +170,8 @@ my $store_failures; my $store_successes; my $test_name; my $timeout; +my $connect_timeout; +my $config_bisect_exec; my $booted_timeout; my $detect_triplefault; my $console; @@ -204,6 +213,20 @@ my $install_time; my $reboot_time; my $test_time; +my $pwd; +my $dirname = $FindBin::Bin; + +my $mailto; +my $mailer; +my $mail_path; +my $mail_command; +my $email_on_error; +my $email_when_finished; +my $email_when_started; +my $email_when_canceled; + +my $script_start_time = localtime(); + # set when a test is something other that just building or install # which would require more options. my $buildonly = 1; @@ -229,6 +252,14 @@ my $no_reboot = 1; my $reboot_success = 0; my %option_map = ( + "MAILTO" => \$mailto, + "MAILER" => \$mailer, + "MAIL_PATH" => \$mail_path, + "MAIL_COMMAND" => \$mail_command, + "EMAIL_ON_ERROR" => \$email_on_error, + "EMAIL_WHEN_FINISHED" => \$email_when_finished, + "EMAIL_WHEN_STARTED" => \$email_when_started, + "EMAIL_WHEN_CANCELED" => \$email_when_canceled, "MACHINE" => \$machine, "SSH_USER" => \$ssh_user, "TMP_DIR" => \$tmpdir, @@ -296,6 +327,8 @@ my %option_map = ( "STORE_SUCCESSES" => \$store_successes, "TEST_NAME" => \$test_name, "TIMEOUT" => \$timeout, + "CONNECT_TIMEOUT" => \$connect_timeout, + "CONFIG_BISECT_EXEC" => \$config_bisect_exec, "BOOTED_TIMEOUT" => \$booted_timeout, "CONSOLE" => \$console, "CLOSE_CONSOLE_SIGNAL" => \$close_console_signal, @@ -337,6 +370,7 @@ my %used_options; # default variables that can be used chomp ($variable{"PWD"} = `pwd`); +$pwd = $variable{"PWD"}; $config_help{"MACHINE"} = << "EOF" The machine hostname that you will test. @@ -718,22 +752,14 @@ sub set_value { my $prvalue = process_variables($rvalue); - if ($buildonly && $lvalue =~ /^TEST_TYPE(\[.*\])?$/ && $prvalue ne "build") { + if ($lvalue =~ /^(TEST|BISECT|CONFIG_BISECT)_TYPE(\[.*\])?$/ && + $prvalue !~ /^(config_|)bisect$/ && + $prvalue !~ /^build$/ && + $buildonly) { + # Note if a test is something other than build, then we # will need other mandatory options. if ($prvalue ne "install") { - # for bisect, we need to check BISECT_TYPE - if ($prvalue ne "bisect") { - $buildonly = 0; - } - } else { - # install still limits some mandatory options. - $buildonly = 2; - } - } - - if ($buildonly && $lvalue =~ /^BISECT_TYPE(\[.*\])?$/ && $prvalue ne "build") { - if ($prvalue ne "install") { $buildonly = 0; } else { # install still limits some mandatory options. @@ -1140,7 +1166,8 @@ sub __read_config { sub get_test_case { print "What test case would you like to run?\n"; print " (build, install or boot)\n"; - print " Other tests are available but require editing the config file\n"; + print " Other tests are available but require editing ktest.conf\n"; + print " (see tools/testing/ktest/sample.conf)\n"; my $ans = <STDIN>; chomp $ans; $default{"TEST_TYPE"} = $ans; @@ -1328,8 +1355,8 @@ sub reboot { my ($time) = @_; my $powercycle = 0; - # test if the machine can be connected to within 5 seconds - my $stat = run_ssh("echo check machine status", 5); + # test if the machine can be connected to within a few seconds + my $stat = run_ssh("echo check machine status", $connect_timeout); if (!$stat) { doprint("power cycle\n"); $powercycle = 1; @@ -1404,10 +1431,18 @@ sub do_not_reboot { return $test_type eq "build" || $no_reboot || ($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") || - ($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build"); + ($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build") || + ($test_type eq "config_bisect" && $opt{"CONFIG_BISECT_TYPE[$i]"} eq "build"); } +my $in_die = 0; + sub dodie { + + # avoid recusion + return if ($in_die); + $in_die = 1; + doprint "CRITICAL FAILURE... ", @_, "\n"; my $i = $iteration; @@ -1426,6 +1461,11 @@ sub dodie { print " See $opt{LOG_FILE} for more info.\n"; } + if ($email_on_error) { + send_email("KTEST: critical failure for your [$test_type] test", + "Your test started at $script_start_time has failed with:\n@_\n"); + } + if ($monitor_cnt) { # restore terminal settings system("stty $stty_orig"); @@ -1477,7 +1517,7 @@ sub exec_console { close($pts); exec $console or - die "Can't open console $console"; + dodie "Can't open console $console"; } sub open_console { @@ -1515,6 +1555,9 @@ sub close_console { doprint "kill child process $pid\n"; kill $close_console_signal, $pid; + doprint "wait for child process $pid to exit\n"; + waitpid($pid, 0); + print "closing!\n"; close($fp); @@ -1625,7 +1668,7 @@ sub save_logs { if (!-d $dir) { mkpath($dir) or - die "can't create $dir"; + dodie "can't create $dir"; } my %files = ( @@ -1638,7 +1681,7 @@ sub save_logs { while (my ($name, $source) = each(%files)) { if (-f "$source") { cp "$source", "$dir/$name" or - die "failed to copy $source"; + dodie "failed to copy $source"; } } @@ -1692,6 +1735,7 @@ sub run_command { my $end_time; my $dolog = 0; my $dord = 0; + my $dostdout = 0; my $pid; $command =~ s/\$SSH_USER/$ssh_user/g; @@ -1710,9 +1754,15 @@ sub run_command { } if (defined($redirect)) { - open (RD, ">$redirect") or - dodie "failed to write to redirect $redirect"; - $dord = 1; + if ($redirect eq 1) { + $dostdout = 1; + # Have the output of the command on its own line + doprint "\n"; + } else { + open (RD, ">$redirect") or + dodie "failed to write to redirect $redirect"; + $dord = 1; + } } my $hit_timeout = 0; @@ -1734,6 +1784,7 @@ sub run_command { } print LOG $line if ($dolog); print RD $line if ($dord); + print $line if ($dostdout); } waitpid($pid, 0); @@ -1812,7 +1863,7 @@ sub get_grub2_index { $ssh_grub =~ s,\$SSH_COMMAND,cat $grub_file,g; open(IN, "$ssh_grub |") - or die "unable to get $grub_file"; + or dodie "unable to get $grub_file"; my $found = 0; @@ -1821,13 +1872,13 @@ sub get_grub2_index { $grub_number++; $found = 1; last; - } elsif (/^menuentry\s/) { + } elsif (/^menuentry\s|^submenu\s/) { $grub_number++; } } close(IN); - die "Could not find '$grub_menu' in $grub_file on $machine" + dodie "Could not find '$grub_menu' in $grub_file on $machine" if (!$found); doprint "$grub_number\n"; $last_grub_menu = $grub_menu; @@ -1855,7 +1906,7 @@ sub get_grub_index { $ssh_grub =~ s,\$SSH_COMMAND,cat /boot/grub/menu.lst,g; open(IN, "$ssh_grub |") - or die "unable to get menu.lst"; + or dodie "unable to get menu.lst"; my $found = 0; @@ -1870,7 +1921,7 @@ sub get_grub_index { } close(IN); - die "Could not find '$grub_menu' in /boot/grub/menu on $machine" + dodie "Could not find '$grub_menu' in /boot/grub/menu on $machine" if (!$found); doprint "$grub_number\n"; $last_grub_menu = $grub_menu; @@ -1983,7 +2034,7 @@ sub monitor { my $full_line = ""; open(DMESG, "> $dmesg") or - die "unable to write to $dmesg"; + dodie "unable to write to $dmesg"; reboot_to; @@ -2862,7 +2913,7 @@ sub run_bisect { sub update_bisect_replay { my $tmp_log = "$tmpdir/ktest_bisect_log"; run_command "git bisect log > $tmp_log" or - die "can't create bisect log"; + dodie "can't create bisect log"; return $tmp_log; } @@ -2871,9 +2922,9 @@ sub bisect { my $result; - die "BISECT_GOOD[$i] not defined\n" if (!defined($bisect_good)); - die "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad)); - die "BISECT_TYPE[$i] not defined\n" if (!defined($bisect_type)); + dodie "BISECT_GOOD[$i] not defined\n" if (!defined($bisect_good)); + dodie "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad)); + dodie "BISECT_TYPE[$i] not defined\n" if (!defined($bisect_type)); my $good = $bisect_good; my $bad = $bisect_bad; @@ -2936,7 +2987,7 @@ sub bisect { if ($check ne "good") { doprint "TESTING BISECT BAD [$bad]\n"; run_command "git checkout $bad" or - die "Failed to checkout $bad"; + dodie "Failed to checkout $bad"; $result = run_bisect $type; @@ -2948,7 +2999,7 @@ sub bisect { if ($check ne "bad") { doprint "TESTING BISECT GOOD [$good]\n"; run_command "git checkout $good" or - die "Failed to checkout $good"; + dodie "Failed to checkout $good"; $result = run_bisect $type; @@ -2959,7 +3010,7 @@ sub bisect { # checkout where we started run_command "git checkout $head" or - die "Failed to checkout $head"; + dodie "Failed to checkout $head"; } run_command "git bisect start$start_files" or @@ -3092,76 +3143,6 @@ sub create_config { make_oldconfig; } -# compare two config hashes, and return configs with different vals. -# It returns B's config values, but you can use A to see what A was. -sub diff_config_vals { - my ($pa, $pb) = @_; - - # crappy Perl way to pass in hashes. - my %a = %{$pa}; - my %b = %{$pb}; - - my %ret; - - foreach my $item (keys %a) { - if (defined($b{$item}) && $b{$item} ne $a{$item}) { - $ret{$item} = $b{$item}; - } - } - - return %ret; -} - -# compare two config hashes and return the configs in B but not A -sub diff_configs { - my ($pa, $pb) = @_; - - my %ret; - - # crappy Perl way to pass in hashes. - my %a = %{$pa}; - my %b = %{$pb}; - - foreach my $item (keys %b) { - if (!defined($a{$item})) { - $ret{$item} = $b{$item}; - } - } - - return %ret; -} - -# return if two configs are equal or not -# 0 is equal +1 b has something a does not -# +1 if a and b have a different item. -# -1 if a has something b does not -sub compare_configs { - my ($pa, $pb) = @_; - - my %ret; - - # crappy Perl way to pass in hashes. - my %a = %{$pa}; - my %b = %{$pb}; - - foreach my $item (keys %b) { - if (!defined($a{$item})) { - return 1; - } - if ($a{$item} ne $b{$item}) { - return 1; - } - } - - foreach my $item (keys %a) { - if (!defined($b{$item})) { - return -1; - } - } - - return 0; -} - sub run_config_bisect_test { my ($type) = @_; @@ -3174,166 +3155,57 @@ sub run_config_bisect_test { return $ret; } -sub process_failed { - my ($config) = @_; +sub config_bisect_end { + my ($good, $bad) = @_; + my $diffexec = "diff -u"; + if (-f "$builddir/scripts/diffconfig") { + $diffexec = "$builddir/scripts/diffconfig"; + } doprint "\n\n***************************************\n"; - doprint "Found bad config: $config\n"; + doprint "No more config bisecting possible.\n"; + run_command "$diffexec $good $bad", 1; doprint "***************************************\n\n"; } -# used for config bisecting -my $good_config; -my $bad_config; - -sub process_new_config { - my ($tc, $nc, $gc, $bc) = @_; - - my %tmp_config = %{$tc}; - my %good_configs = %{$gc}; - my %bad_configs = %{$bc}; - - my %new_configs; - - my $runtest = 1; - my $ret; - - create_config "tmp_configs", \%tmp_config; - assign_configs \%new_configs, $output_config; - - $ret = compare_configs \%new_configs, \%bad_configs; - if (!$ret) { - doprint "New config equals bad config, try next test\n"; - $runtest = 0; - } - - if ($runtest) { - $ret = compare_configs \%new_configs, \%good_configs; - if (!$ret) { - doprint "New config equals good config, try next test\n"; - $runtest = 0; - } - } - - %{$nc} = %new_configs; - - return $runtest; -} - sub run_config_bisect { - my ($pgood, $pbad) = @_; - - my $type = $config_bisect_type; - - my %good_configs = %{$pgood}; - my %bad_configs = %{$pbad}; - - my %diff_configs = diff_config_vals \%good_configs, \%bad_configs; - my %b_configs = diff_configs \%good_configs, \%bad_configs; - my %g_configs = diff_configs \%bad_configs, \%good_configs; - - my @diff_arr = keys %diff_configs; - my $len_diff = $#diff_arr + 1; - - my @b_arr = keys %b_configs; - my $len_b = $#b_arr + 1; - - my @g_arr = keys %g_configs; - my $len_g = $#g_arr + 1; - - my $runtest = 1; - my %new_configs; + my ($good, $bad, $last_result) = @_; + my $reset = ""; + my $cmd; my $ret; - # First, lets get it down to a single subset. - # Is the problem with a difference in values? - # Is the problem with a missing config? - # Is the problem with a config that breaks things? - - # Enable all of one set and see if we get a new bad - # or good config. - - # first set the good config to the bad values. - - doprint "d=$len_diff g=$len_g b=$len_b\n"; - - # first lets enable things in bad config that are enabled in good config - - if ($len_diff > 0) { - if ($len_b > 0 || $len_g > 0) { - my %tmp_config = %bad_configs; - - doprint "Set tmp config to be bad config with good config values\n"; - foreach my $item (@diff_arr) { - $tmp_config{$item} = $good_configs{$item}; - } - - $runtest = process_new_config \%tmp_config, \%new_configs, - \%good_configs, \%bad_configs; - } + if (!length($last_result)) { + $reset = "-r"; } + run_command "$config_bisect_exec $reset -b $outputdir $good $bad $last_result", 1; - if (!$runtest && $len_diff > 0) { - - if ($len_diff == 1) { - process_failed $diff_arr[0]; - return 1; - } - my %tmp_config = %bad_configs; - - my $half = int($#diff_arr / 2); - my @tophalf = @diff_arr[0 .. $half]; - - doprint "Settings bisect with top half:\n"; - doprint "Set tmp config to be bad config with some good config values\n"; - foreach my $item (@tophalf) { - $tmp_config{$item} = $good_configs{$item}; - } - - $runtest = process_new_config \%tmp_config, \%new_configs, - \%good_configs, \%bad_configs; - - if (!$runtest) { - my %tmp_config = %bad_configs; - - doprint "Try bottom half\n"; - - my @bottomhalf = @diff_arr[$half+1 .. $#diff_arr]; - - foreach my $item (@bottomhalf) { - $tmp_config{$item} = $good_configs{$item}; - } - - $runtest = process_new_config \%tmp_config, \%new_configs, - \%good_configs, \%bad_configs; - } + # config-bisect returns: + # 0 if there is more to bisect + # 1 for finding a good config + # 2 if it can not find any more configs + # -1 (255) on error + if ($run_command_status) { + return $run_command_status; } - if ($runtest) { - $ret = run_config_bisect_test $type; - if ($ret) { - doprint "NEW GOOD CONFIG\n"; - %good_configs = %new_configs; - run_command "mv $good_config ${good_config}.last"; - save_config \%good_configs, $good_config; - %{$pgood} = %good_configs; - } else { - doprint "NEW BAD CONFIG\n"; - %bad_configs = %new_configs; - run_command "mv $bad_config ${bad_config}.last"; - save_config \%bad_configs, $bad_config; - %{$pbad} = %bad_configs; - } - return 0; + $ret = run_config_bisect_test $config_bisect_type; + if ($ret) { + doprint "NEW GOOD CONFIG\n"; + # Return 3 for good config + return 3; + } else { + doprint "NEW BAD CONFIG\n"; + # Return 4 for bad config + return 4; } - - fail "Hmm, need to do a mix match?\n"; - return -1; } sub config_bisect { my ($i) = @_; + my $good_config; + my $bad_config; + my $type = $config_bisect_type; my $ret; @@ -3353,6 +3225,24 @@ sub config_bisect { $good_config = $output_config; } + if (!defined($config_bisect_exec)) { + # First check the location that ktest.pl ran + my @locations = ( "$pwd/config-bisect.pl", + "$dirname/config-bisect.pl", + "$builddir/tools/testing/ktest/config-bisect.pl", + undef ); + foreach my $loc (@locations) { + doprint "loc = $loc\n"; + $config_bisect_exec = $loc; + last if (defined($config_bisect_exec && -x $config_bisect_exec)); + } + if (!defined($config_bisect_exec)) { + fail "Could not find an executable config-bisect.pl\n", + " Set CONFIG_BISECT_EXEC to point to config-bisect.pl"; + return 1; + } + } + # we don't want min configs to cause issues here. doprint "Disabling 'MIN_CONFIG' for this test\n"; undef $minconfig; @@ -3361,21 +3251,31 @@ sub config_bisect { my %bad_configs; my %tmp_configs; + if (-f "$tmpdir/good_config.tmp" || -f "$tmpdir/bad_config.tmp") { + if (read_yn "Interrupted config-bisect. Continue (n - will start new)?") { + if (-f "$tmpdir/good_config.tmp") { + $good_config = "$tmpdir/good_config.tmp"; + } else { + $good_config = "$tmpdir/good_config"; + } + if (-f "$tmpdir/bad_config.tmp") { + $bad_config = "$tmpdir/bad_config.tmp"; + } else { + $bad_config = "$tmpdir/bad_config"; + } + } + } doprint "Run good configs through make oldconfig\n"; assign_configs \%tmp_configs, $good_config; create_config "$good_config", \%tmp_configs; - assign_configs \%good_configs, $output_config; + $good_config = "$tmpdir/good_config"; + system("cp $output_config $good_config") == 0 or dodie "cp good config"; doprint "Run bad configs through make oldconfig\n"; assign_configs \%tmp_configs, $bad_config; create_config "$bad_config", \%tmp_configs; - assign_configs \%bad_configs, $output_config; - - $good_config = "$tmpdir/good_config"; $bad_config = "$tmpdir/bad_config"; - - save_config \%good_configs, $good_config; - save_config \%bad_configs, $bad_config; + system("cp $output_config $bad_config") == 0 or dodie "cp bad config"; if (defined($config_bisect_check) && $config_bisect_check ne "0") { if ($config_bisect_check ne "good") { @@ -3398,10 +3298,21 @@ sub config_bisect { } } + my $last_run = ""; + do { - $ret = run_config_bisect \%good_configs, \%bad_configs; + $ret = run_config_bisect $good_config, $bad_config, $last_run; + if ($ret == 3) { + $last_run = "good"; + } elsif ($ret == 4) { + $last_run = "bad"; + } print_times; - } while (!$ret); + } while ($ret == 3 || $ret == 4); + + if ($ret == 2) { + config_bisect_end "$good_config.tmp", "$bad_config.tmp"; + } return $ret if ($ret < 0); @@ -3416,9 +3327,9 @@ sub patchcheck_reboot { sub patchcheck { my ($i) = @_; - die "PATCHCHECK_START[$i] not defined\n" + dodie "PATCHCHECK_START[$i] not defined\n" if (!defined($patchcheck_start)); - die "PATCHCHECK_TYPE[$i] not defined\n" + dodie "PATCHCHECK_TYPE[$i] not defined\n" if (!defined($patchcheck_type)); my $start = $patchcheck_start; @@ -3432,7 +3343,7 @@ sub patchcheck { if (defined($patchcheck_end)) { $end = $patchcheck_end; } elsif ($cherry) { - die "PATCHCHECK_END must be defined with PATCHCHECK_CHERRY\n"; + dodie "PATCHCHECK_END must be defined with PATCHCHECK_CHERRY\n"; } # Get the true sha1's since we can use things like HEAD~3 @@ -3496,7 +3407,7 @@ sub patchcheck { doprint "\nProcessing commit \"$item\"\n\n"; run_command "git checkout $sha1" or - die "Failed to checkout $sha1"; + dodie "Failed to checkout $sha1"; # only clean on the first and last patch if ($item eq $list[0] || @@ -3587,7 +3498,7 @@ sub read_kconfig { } open(KIN, "$kconfig") - or die "Can't open $kconfig"; + or dodie "Can't open $kconfig"; while (<KIN>) { chomp; @@ -3746,7 +3657,7 @@ sub get_depends { $dep =~ s/^[^$valid]*[$valid]+//; } else { - die "this should never happen"; + dodie "this should never happen"; } } @@ -4007,7 +3918,7 @@ sub make_min_config { # update new ignore configs if (defined($ignore_config)) { open (OUT, ">$temp_config") - or die "Can't write to $temp_config"; + or dodie "Can't write to $temp_config"; foreach my $config (keys %save_configs) { print OUT "$save_configs{$config}\n"; } @@ -4035,7 +3946,7 @@ sub make_min_config { # Save off all the current mandatory configs open (OUT, ">$temp_config") - or die "Can't write to $temp_config"; + or dodie "Can't write to $temp_config"; foreach my $config (keys %keep_configs) { print OUT "$keep_configs{$config}\n"; } @@ -4222,6 +4133,74 @@ sub set_test_option { return eval_option($name, $option, $i); } +sub find_mailer { + my ($mailer) = @_; + + my @paths = split /:/, $ENV{PATH}; + + # sendmail is usually in /usr/sbin + $paths[$#paths + 1] = "/usr/sbin"; + + foreach my $path (@paths) { + if (-x "$path/$mailer") { + return $path; + } + } + + return undef; +} + +sub do_send_mail { + my ($subject, $message) = @_; + + if (!defined($mail_path)) { + # find the mailer + $mail_path = find_mailer $mailer; + if (!defined($mail_path)) { + die "\nCan not find $mailer in PATH\n"; + } + } + + if (!defined($mail_command)) { + if ($mailer eq "mail" || $mailer eq "mailx") { + $mail_command = "\$MAIL_PATH/\$MAILER -s \'\$SUBJECT\' \$MAILTO <<< \'\$MESSAGE\'"; + } elsif ($mailer eq "sendmail" ) { + $mail_command = "echo \'Subject: \$SUBJECT\n\n\$MESSAGE\' | \$MAIL_PATH/\$MAILER -t \$MAILTO"; + } else { + die "\nYour mailer: $mailer is not supported.\n"; + } + } + + $mail_command =~ s/\$MAILER/$mailer/g; + $mail_command =~ s/\$MAIL_PATH/$mail_path/g; + $mail_command =~ s/\$MAILTO/$mailto/g; + $mail_command =~ s/\$SUBJECT/$subject/g; + $mail_command =~ s/\$MESSAGE/$message/g; + + run_command $mail_command; +} + +sub send_email { + + if (defined($mailto)) { + if (!defined($mailer)) { + doprint "No email sent: email or mailer not specified in config.\n"; + return; + } + do_send_mail @_; + } +} + +sub cancel_test { + if ($email_when_canceled) { + send_email("KTEST: Your [$test_type] test was cancelled", + "Your test started at $script_start_time was cancelled: sig int"); + } + die "\nCaught Sig Int, test interrupted: $!\n" +} + +$SIG{INT} = qw(cancel_test); + # First we need to do is the builds for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { @@ -4245,11 +4224,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $outputdir = set_test_option("OUTPUT_DIR", $i); $builddir = set_test_option("BUILD_DIR", $i); - chdir $builddir || die "can't change directory to $builddir"; + chdir $builddir || dodie "can't change directory to $builddir"; if (!-d $outputdir) { mkpath($outputdir) or - die "can't create $outputdir"; + dodie "can't create $outputdir"; } $make = "$makecmd O=$outputdir"; @@ -4262,9 +4241,15 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $start_minconfig_defined = 1; # The first test may override the PRE_KTEST option - if (defined($pre_ktest) && $i == 1) { - doprint "\n"; - run_command $pre_ktest; + if ($i == 1) { + if (defined($pre_ktest)) { + doprint "\n"; + run_command $pre_ktest; + } + if ($email_when_started) { + send_email("KTEST: Your [$test_type] test was started", + "Your test was started on $script_start_time"); + } } # Any test can override the POST_KTEST option @@ -4280,7 +4265,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { if (!-d $tmpdir) { mkpath($tmpdir) or - die "can't create $tmpdir"; + dodie "can't create $tmpdir"; } $ENV{"SSH_USER"} = $ssh_user; @@ -4353,7 +4338,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { if (defined($checkout)) { run_command "git checkout $checkout" or - die "failed to checkout $checkout"; + dodie "failed to checkout $checkout"; } $no_reboot = 0; @@ -4428,4 +4413,8 @@ if ($opt{"POWEROFF_ON_SUCCESS"}) { doprint "\n $successes of $opt{NUM_TESTS} tests were successful\n\n"; +if ($email_when_finished) { + send_email("KTEST: Your [$test_type] test has finished!", + "$successes of $opt{NUM_TESTS} tests started at $script_start_time were successful!"); +} exit 0; diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf index 6c58cd8bbbae..6ca6ca0ce695 100644 --- a/tools/testing/ktest/sample.conf +++ b/tools/testing/ktest/sample.conf @@ -1,6 +1,11 @@ # # Config file for ktest.pl # +# Place your customized version of this, in the working directory that +# ktest.pl is run from. By default, ktest.pl will look for a file +# called "ktest.conf", but you can name it anything you like and specify +# the name of your config file as the first argument of ktest.pl. +# # Note, all paths must be absolute # @@ -396,6 +401,44 @@ #### Optional Config Options (all have defaults) #### +# Email options for receiving notifications. Users must setup +# the specified mailer prior to using this feature. +# +# (default undefined) +#MAILTO = +# +# Supported mailers: sendmail, mail, mailx +# (default sendmail) +#MAILER = sendmail +# +# The executable to run +# (default: for sendmail "/usr/sbin/sendmail", otherwise equals ${MAILER}) +#MAIL_EXEC = /usr/sbin/sendmail +# +# The command used to send mail, which uses the above options +# can be modified. By default if the mailer is "sendmail" then +# MAIL_COMMAND = echo \'Subject: $SUBJECT\n\n$MESSAGE\' | $MAIL_PATH/$MAILER -t $MAILTO +# For mail or mailx: +# MAIL_COMMAND = "$MAIL_PATH/$MAILER -s \'$SUBJECT\' $MAILTO <<< \'$MESSAGE\' +# ktest.pl will do the substitution for MAIL_PATH, MAILER, MAILTO at the time +# it sends the mail if "$FOO" format is used. If "${FOO}" format is used, +# then the substitutions will occur at the time the config file is read. +# But note, MAIL_PATH and MAILER require being set by the config file if +# ${MAIL_PATH} or ${MAILER} are used, but not if $MAIL_PATH or $MAILER are. +#MAIL_COMMAND = echo \'Subject: $SUBJECT\n\n$MESSAGE\' | $MAIL_PATH/$MAILER -t $MAILTO +# +# Errors are defined as those would terminate the script +# (default 1) +#EMAIL_ON_ERROR = 1 +# (default 1) +#EMAIL_WHEN_FINISHED = 1 +# (default 0) +#EMAIL_WHEN_STARTED = 1 +# +# Users can cancel the test by Ctrl^C +# (default 0) +#EMAIL_WHEN_CANCELED = 1 + # Start a test setup. If you leave this off, all options # will be default and the test will run once. # This is a label and not really an option (it takes no value). @@ -725,6 +768,13 @@ # (default 120) #TIMEOUT = 120 +# The timeout in seconds when to test if the box can be rebooted +# or not. Before issuing the reboot command, a ssh connection +# is attempted to see if the target machine is still active. +# If the target does not connect within this timeout, a power cycle +# is issued instead of a reboot. +# CONNECT_TIMEOUT = 25 + # In between tests, a reboot of the box may occur, and this # is the time to wait for the console after it stops producing # output. Some machines may not produce a large lag on reboot @@ -1167,6 +1217,16 @@ # Set it to "good" to test only the good config and set it # to "bad" to only test the bad config. # +# CONFIG_BISECT_EXEC (optional) +# The config bisect is a separate program that comes with ktest.pl. +# By befault, it will look for: +# `pwd`/config-bisect.pl # the location ktest.pl was executed from. +# If it does not find it there, it will look for: +# `dirname <ktest.pl>`/config-bisect.pl # The directory that holds ktest.pl +# If it does not find it there, it will look for: +# ${BUILD_DIR}/tools/testing/ktest/config-bisect.pl +# Setting CONFIG_BISECT_EXEC will override where it looks. +# # Example: # TEST_START # TEST_TYPE = config_bisect diff --git a/tools/testing/nvdimm/test/nfit.c b/tools/testing/nvdimm/test/nfit.c index 620fa78b3b1b..cb166be4918d 100644 --- a/tools/testing/nvdimm/test/nfit.c +++ b/tools/testing/nvdimm/test/nfit.c @@ -104,7 +104,8 @@ enum { NUM_HINTS = 8, NUM_BDW = NUM_DCR, NUM_SPA = NUM_PM + NUM_DCR + NUM_BDW, - NUM_MEM = NUM_DCR + NUM_BDW + 2 /* spa0 iset */ + 4 /* spa1 iset */, + NUM_MEM = NUM_DCR + NUM_BDW + 2 /* spa0 iset */ + + 4 /* spa1 iset */ + 1 /* spa11 iset */, DIMM_SIZE = SZ_32M, LABEL_SIZE = SZ_128K, SPA_VCD_SIZE = SZ_4M, @@ -153,6 +154,7 @@ struct nfit_test { void *nfit_buf; dma_addr_t nfit_dma; size_t nfit_size; + size_t nfit_filled; int dcr_idx; int num_dcr; int num_pm; @@ -709,7 +711,9 @@ static void smart_notify(struct device *bus_dev, >= thresh->media_temperature) || ((thresh->alarm_control & ND_INTEL_SMART_CTEMP_TRIP) && smart->ctrl_temperature - >= thresh->ctrl_temperature)) { + >= thresh->ctrl_temperature) + || (smart->health != ND_INTEL_SMART_NON_CRITICAL_HEALTH) + || (smart->shutdown_state != 0)) { device_lock(bus_dev); __acpi_nvdimm_notify(dimm_dev, 0x81); device_unlock(bus_dev); @@ -735,6 +739,32 @@ static int nfit_test_cmd_smart_set_threshold( return 0; } +static int nfit_test_cmd_smart_inject( + struct nd_intel_smart_inject *inj, + unsigned int buf_len, + struct nd_intel_smart_threshold *thresh, + struct nd_intel_smart *smart, + struct device *bus_dev, struct device *dimm_dev) +{ + if (buf_len != sizeof(*inj)) + return -EINVAL; + + if (inj->mtemp_enable) + smart->media_temperature = inj->media_temperature; + if (inj->spare_enable) + smart->spares = inj->spares; + if (inj->fatal_enable) + smart->health = ND_INTEL_SMART_FATAL_HEALTH; + if (inj->unsafe_shutdown_enable) { + smart->shutdown_state = 1; + smart->shutdown_count++; + } + inj->status = 0; + smart_notify(bus_dev, dimm_dev, smart, thresh); + + return 0; +} + static void uc_error_notify(struct work_struct *work) { struct nfit_test *t = container_of(work, typeof(*t), work); @@ -935,6 +965,13 @@ static int nfit_test_ctl(struct nvdimm_bus_descriptor *nd_desc, t->dcr_idx], &t->smart[i - t->dcr_idx], &t->pdev.dev, t->dimm_dev[i]); + case ND_INTEL_SMART_INJECT: + return nfit_test_cmd_smart_inject(buf, + buf_len, + &t->smart_threshold[i - + t->dcr_idx], + &t->smart[i - t->dcr_idx], + &t->pdev.dev, t->dimm_dev[i]); default: return -ENOTTY; } @@ -1222,7 +1259,7 @@ static void smart_init(struct nfit_test *t) | ND_INTEL_SMART_MTEMP_VALID, .health = ND_INTEL_SMART_NON_CRITICAL_HEALTH, .media_temperature = 23 * 16, - .ctrl_temperature = 30 * 16, + .ctrl_temperature = 25 * 16, .pmic_temperature = 40 * 16, .spares = 75, .alarm_flags = ND_INTEL_SMART_SPARE_TRIP @@ -1366,7 +1403,7 @@ static void nfit_test0_setup(struct nfit_test *t) struct acpi_nfit_data_region *bdw; struct acpi_nfit_flush_address *flush; struct acpi_nfit_capabilities *pcap; - unsigned int offset, i; + unsigned int offset = 0, i; /* * spa0 (interleave first half of dimm0 and dimm1, note storage @@ -1380,93 +1417,102 @@ static void nfit_test0_setup(struct nfit_test *t) spa->range_index = 0+1; spa->address = t->spa_set_dma[0]; spa->length = SPA0_SIZE; + offset += spa->header.length; /* * spa1 (interleave last half of the 4 DIMMS, note storage * does not actually alias the related block-data-window * regions) */ - spa = nfit_buf + sizeof(*spa); + spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; spa->header.length = sizeof(*spa); memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_PM), 16); spa->range_index = 1+1; spa->address = t->spa_set_dma[1]; spa->length = SPA1_SIZE; + offset += spa->header.length; /* spa2 (dcr0) dimm0 */ - spa = nfit_buf + sizeof(*spa) * 2; + spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; spa->header.length = sizeof(*spa); memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_DCR), 16); spa->range_index = 2+1; spa->address = t->dcr_dma[0]; spa->length = DCR_SIZE; + offset += spa->header.length; /* spa3 (dcr1) dimm1 */ - spa = nfit_buf + sizeof(*spa) * 3; + spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; spa->header.length = sizeof(*spa); memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_DCR), 16); spa->range_index = 3+1; spa->address = t->dcr_dma[1]; spa->length = DCR_SIZE; + offset += spa->header.length; /* spa4 (dcr2) dimm2 */ - spa = nfit_buf + sizeof(*spa) * 4; + spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; spa->header.length = sizeof(*spa); memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_DCR), 16); spa->range_index = 4+1; spa->address = t->dcr_dma[2]; spa->length = DCR_SIZE; + offset += spa->header.length; /* spa5 (dcr3) dimm3 */ - spa = nfit_buf + sizeof(*spa) * 5; + spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; spa->header.length = sizeof(*spa); memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_DCR), 16); spa->range_index = 5+1; spa->address = t->dcr_dma[3]; spa->length = DCR_SIZE; + offset += spa->header.length; /* spa6 (bdw for dcr0) dimm0 */ - spa = nfit_buf + sizeof(*spa) * 6; + spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; spa->header.length = sizeof(*spa); memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_BDW), 16); spa->range_index = 6+1; spa->address = t->dimm_dma[0]; spa->length = DIMM_SIZE; + offset += spa->header.length; /* spa7 (bdw for dcr1) dimm1 */ - spa = nfit_buf + sizeof(*spa) * 7; + spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; spa->header.length = sizeof(*spa); memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_BDW), 16); spa->range_index = 7+1; spa->address = t->dimm_dma[1]; spa->length = DIMM_SIZE; + offset += spa->header.length; /* spa8 (bdw for dcr2) dimm2 */ - spa = nfit_buf + sizeof(*spa) * 8; + spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; spa->header.length = sizeof(*spa); memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_BDW), 16); spa->range_index = 8+1; spa->address = t->dimm_dma[2]; spa->length = DIMM_SIZE; + offset += spa->header.length; /* spa9 (bdw for dcr3) dimm3 */ - spa = nfit_buf + sizeof(*spa) * 9; + spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; spa->header.length = sizeof(*spa); memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_BDW), 16); spa->range_index = 9+1; spa->address = t->dimm_dma[3]; spa->length = DIMM_SIZE; + offset += spa->header.length; - offset = sizeof(*spa) * 10; /* mem-region0 (spa0, dimm0) */ memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; @@ -1481,9 +1527,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->address = 0; memdev->interleave_index = 0; memdev->interleave_ways = 2; + offset += memdev->header.length; /* mem-region1 (spa0, dimm1) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map); + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[1]; @@ -1497,9 +1544,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->interleave_index = 0; memdev->interleave_ways = 2; memdev->flags = ACPI_NFIT_MEM_HEALTH_ENABLED; + offset += memdev->header.length; /* mem-region2 (spa1, dimm0) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map) * 2; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[0]; @@ -1513,9 +1561,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->interleave_index = 0; memdev->interleave_ways = 4; memdev->flags = ACPI_NFIT_MEM_HEALTH_ENABLED; + offset += memdev->header.length; /* mem-region3 (spa1, dimm1) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map) * 3; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[1]; @@ -1528,9 +1577,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->address = SPA0_SIZE/2; memdev->interleave_index = 0; memdev->interleave_ways = 4; + offset += memdev->header.length; /* mem-region4 (spa1, dimm2) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map) * 4; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[2]; @@ -1544,9 +1594,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->interleave_index = 0; memdev->interleave_ways = 4; memdev->flags = ACPI_NFIT_MEM_HEALTH_ENABLED; + offset += memdev->header.length; /* mem-region5 (spa1, dimm3) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map) * 5; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[3]; @@ -1559,9 +1610,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->address = SPA0_SIZE/2; memdev->interleave_index = 0; memdev->interleave_ways = 4; + offset += memdev->header.length; /* mem-region6 (spa/dcr0, dimm0) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map) * 6; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[0]; @@ -1574,9 +1626,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->address = 0; memdev->interleave_index = 0; memdev->interleave_ways = 1; + offset += memdev->header.length; /* mem-region7 (spa/dcr1, dimm1) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map) * 7; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[1]; @@ -1589,9 +1642,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->address = 0; memdev->interleave_index = 0; memdev->interleave_ways = 1; + offset += memdev->header.length; /* mem-region8 (spa/dcr2, dimm2) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map) * 8; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[2]; @@ -1604,9 +1658,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->address = 0; memdev->interleave_index = 0; memdev->interleave_ways = 1; + offset += memdev->header.length; /* mem-region9 (spa/dcr3, dimm3) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map) * 9; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[3]; @@ -1619,9 +1674,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->address = 0; memdev->interleave_index = 0; memdev->interleave_ways = 1; + offset += memdev->header.length; /* mem-region10 (spa/bdw0, dimm0) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map) * 10; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[0]; @@ -1634,9 +1690,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->address = 0; memdev->interleave_index = 0; memdev->interleave_ways = 1; + offset += memdev->header.length; /* mem-region11 (spa/bdw1, dimm1) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map) * 11; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[1]; @@ -1649,9 +1706,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->address = 0; memdev->interleave_index = 0; memdev->interleave_ways = 1; + offset += memdev->header.length; /* mem-region12 (spa/bdw2, dimm2) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map) * 12; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[2]; @@ -1664,9 +1722,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->address = 0; memdev->interleave_index = 0; memdev->interleave_ways = 1; + offset += memdev->header.length; /* mem-region13 (spa/dcr3, dimm3) */ - memdev = nfit_buf + offset + sizeof(struct acpi_nfit_memory_map) * 13; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[3]; @@ -1680,12 +1739,12 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->interleave_index = 0; memdev->interleave_ways = 1; memdev->flags = ACPI_NFIT_MEM_HEALTH_ENABLED; + offset += memdev->header.length; - offset = offset + sizeof(struct acpi_nfit_memory_map) * 14; /* dcr-descriptor0: blk */ dcr = nfit_buf + offset; dcr->header.type = ACPI_NFIT_TYPE_CONTROL_REGION; - dcr->header.length = sizeof(struct acpi_nfit_control_region); + dcr->header.length = sizeof(*dcr); dcr->region_index = 0+1; dcr_common_init(dcr); dcr->serial_number = ~handle[0]; @@ -1696,11 +1755,12 @@ static void nfit_test0_setup(struct nfit_test *t) dcr->command_size = 8; dcr->status_offset = 8; dcr->status_size = 4; + offset += dcr->header.length; /* dcr-descriptor1: blk */ - dcr = nfit_buf + offset + sizeof(struct acpi_nfit_control_region); + dcr = nfit_buf + offset; dcr->header.type = ACPI_NFIT_TYPE_CONTROL_REGION; - dcr->header.length = sizeof(struct acpi_nfit_control_region); + dcr->header.length = sizeof(*dcr); dcr->region_index = 1+1; dcr_common_init(dcr); dcr->serial_number = ~handle[1]; @@ -1711,11 +1771,12 @@ static void nfit_test0_setup(struct nfit_test *t) dcr->command_size = 8; dcr->status_offset = 8; dcr->status_size = 4; + offset += dcr->header.length; /* dcr-descriptor2: blk */ - dcr = nfit_buf + offset + sizeof(struct acpi_nfit_control_region) * 2; + dcr = nfit_buf + offset; dcr->header.type = ACPI_NFIT_TYPE_CONTROL_REGION; - dcr->header.length = sizeof(struct acpi_nfit_control_region); + dcr->header.length = sizeof(*dcr); dcr->region_index = 2+1; dcr_common_init(dcr); dcr->serial_number = ~handle[2]; @@ -1726,11 +1787,12 @@ static void nfit_test0_setup(struct nfit_test *t) dcr->command_size = 8; dcr->status_offset = 8; dcr->status_size = 4; + offset += dcr->header.length; /* dcr-descriptor3: blk */ - dcr = nfit_buf + offset + sizeof(struct acpi_nfit_control_region) * 3; + dcr = nfit_buf + offset; dcr->header.type = ACPI_NFIT_TYPE_CONTROL_REGION; - dcr->header.length = sizeof(struct acpi_nfit_control_region); + dcr->header.length = sizeof(*dcr); dcr->region_index = 3+1; dcr_common_init(dcr); dcr->serial_number = ~handle[3]; @@ -1741,8 +1803,8 @@ static void nfit_test0_setup(struct nfit_test *t) dcr->command_size = 8; dcr->status_offset = 8; dcr->status_size = 4; + offset += dcr->header.length; - offset = offset + sizeof(struct acpi_nfit_control_region) * 4; /* dcr-descriptor0: pmem */ dcr = nfit_buf + offset; dcr->header.type = ACPI_NFIT_TYPE_CONTROL_REGION; @@ -1753,10 +1815,10 @@ static void nfit_test0_setup(struct nfit_test *t) dcr->serial_number = ~handle[0]; dcr->code = NFIT_FIC_BYTEN; dcr->windows = 0; + offset += dcr->header.length; /* dcr-descriptor1: pmem */ - dcr = nfit_buf + offset + offsetof(struct acpi_nfit_control_region, - window_size); + dcr = nfit_buf + offset; dcr->header.type = ACPI_NFIT_TYPE_CONTROL_REGION; dcr->header.length = offsetof(struct acpi_nfit_control_region, window_size); @@ -1765,10 +1827,10 @@ static void nfit_test0_setup(struct nfit_test *t) dcr->serial_number = ~handle[1]; dcr->code = NFIT_FIC_BYTEN; dcr->windows = 0; + offset += dcr->header.length; /* dcr-descriptor2: pmem */ - dcr = nfit_buf + offset + offsetof(struct acpi_nfit_control_region, - window_size) * 2; + dcr = nfit_buf + offset; dcr->header.type = ACPI_NFIT_TYPE_CONTROL_REGION; dcr->header.length = offsetof(struct acpi_nfit_control_region, window_size); @@ -1777,10 +1839,10 @@ static void nfit_test0_setup(struct nfit_test *t) dcr->serial_number = ~handle[2]; dcr->code = NFIT_FIC_BYTEN; dcr->windows = 0; + offset += dcr->header.length; /* dcr-descriptor3: pmem */ - dcr = nfit_buf + offset + offsetof(struct acpi_nfit_control_region, - window_size) * 3; + dcr = nfit_buf + offset; dcr->header.type = ACPI_NFIT_TYPE_CONTROL_REGION; dcr->header.length = offsetof(struct acpi_nfit_control_region, window_size); @@ -1789,54 +1851,56 @@ static void nfit_test0_setup(struct nfit_test *t) dcr->serial_number = ~handle[3]; dcr->code = NFIT_FIC_BYTEN; dcr->windows = 0; + offset += dcr->header.length; - offset = offset + offsetof(struct acpi_nfit_control_region, - window_size) * 4; /* bdw0 (spa/dcr0, dimm0) */ bdw = nfit_buf + offset; bdw->header.type = ACPI_NFIT_TYPE_DATA_REGION; - bdw->header.length = sizeof(struct acpi_nfit_data_region); + bdw->header.length = sizeof(*bdw); bdw->region_index = 0+1; bdw->windows = 1; bdw->offset = 0; bdw->size = BDW_SIZE; bdw->capacity = DIMM_SIZE; bdw->start_address = 0; + offset += bdw->header.length; /* bdw1 (spa/dcr1, dimm1) */ - bdw = nfit_buf + offset + sizeof(struct acpi_nfit_data_region); + bdw = nfit_buf + offset; bdw->header.type = ACPI_NFIT_TYPE_DATA_REGION; - bdw->header.length = sizeof(struct acpi_nfit_data_region); + bdw->header.length = sizeof(*bdw); bdw->region_index = 1+1; bdw->windows = 1; bdw->offset = 0; bdw->size = BDW_SIZE; bdw->capacity = DIMM_SIZE; bdw->start_address = 0; + offset += bdw->header.length; /* bdw2 (spa/dcr2, dimm2) */ - bdw = nfit_buf + offset + sizeof(struct acpi_nfit_data_region) * 2; + bdw = nfit_buf + offset; bdw->header.type = ACPI_NFIT_TYPE_DATA_REGION; - bdw->header.length = sizeof(struct acpi_nfit_data_region); + bdw->header.length = sizeof(*bdw); bdw->region_index = 2+1; bdw->windows = 1; bdw->offset = 0; bdw->size = BDW_SIZE; bdw->capacity = DIMM_SIZE; bdw->start_address = 0; + offset += bdw->header.length; /* bdw3 (spa/dcr3, dimm3) */ - bdw = nfit_buf + offset + sizeof(struct acpi_nfit_data_region) * 3; + bdw = nfit_buf + offset; bdw->header.type = ACPI_NFIT_TYPE_DATA_REGION; - bdw->header.length = sizeof(struct acpi_nfit_data_region); + bdw->header.length = sizeof(*bdw); bdw->region_index = 3+1; bdw->windows = 1; bdw->offset = 0; bdw->size = BDW_SIZE; bdw->capacity = DIMM_SIZE; bdw->start_address = 0; + offset += bdw->header.length; - offset = offset + sizeof(struct acpi_nfit_data_region) * 4; /* flush0 (dimm0) */ flush = nfit_buf + offset; flush->header.type = ACPI_NFIT_TYPE_FLUSH_ADDRESS; @@ -1845,48 +1909,52 @@ static void nfit_test0_setup(struct nfit_test *t) flush->hint_count = NUM_HINTS; for (i = 0; i < NUM_HINTS; i++) flush->hint_address[i] = t->flush_dma[0] + i * sizeof(u64); + offset += flush->header.length; /* flush1 (dimm1) */ - flush = nfit_buf + offset + flush_hint_size * 1; + flush = nfit_buf + offset; flush->header.type = ACPI_NFIT_TYPE_FLUSH_ADDRESS; flush->header.length = flush_hint_size; flush->device_handle = handle[1]; flush->hint_count = NUM_HINTS; for (i = 0; i < NUM_HINTS; i++) flush->hint_address[i] = t->flush_dma[1] + i * sizeof(u64); + offset += flush->header.length; /* flush2 (dimm2) */ - flush = nfit_buf + offset + flush_hint_size * 2; + flush = nfit_buf + offset; flush->header.type = ACPI_NFIT_TYPE_FLUSH_ADDRESS; flush->header.length = flush_hint_size; flush->device_handle = handle[2]; flush->hint_count = NUM_HINTS; for (i = 0; i < NUM_HINTS; i++) flush->hint_address[i] = t->flush_dma[2] + i * sizeof(u64); + offset += flush->header.length; /* flush3 (dimm3) */ - flush = nfit_buf + offset + flush_hint_size * 3; + flush = nfit_buf + offset; flush->header.type = ACPI_NFIT_TYPE_FLUSH_ADDRESS; flush->header.length = flush_hint_size; flush->device_handle = handle[3]; flush->hint_count = NUM_HINTS; for (i = 0; i < NUM_HINTS; i++) flush->hint_address[i] = t->flush_dma[3] + i * sizeof(u64); + offset += flush->header.length; /* platform capabilities */ - pcap = nfit_buf + offset + flush_hint_size * 4; + pcap = nfit_buf + offset; pcap->header.type = ACPI_NFIT_TYPE_CAPABILITIES; pcap->header.length = sizeof(*pcap); pcap->highest_capability = 1; pcap->capabilities = ACPI_NFIT_CAPABILITY_CACHE_FLUSH | ACPI_NFIT_CAPABILITY_MEM_FLUSH; + offset += pcap->header.length; if (t->setup_hotplug) { - offset = offset + flush_hint_size * 4 + sizeof(*pcap); /* dcr-descriptor4: blk */ dcr = nfit_buf + offset; dcr->header.type = ACPI_NFIT_TYPE_CONTROL_REGION; - dcr->header.length = sizeof(struct acpi_nfit_control_region); + dcr->header.length = sizeof(*dcr); dcr->region_index = 8+1; dcr_common_init(dcr); dcr->serial_number = ~handle[4]; @@ -1897,8 +1965,8 @@ static void nfit_test0_setup(struct nfit_test *t) dcr->command_size = 8; dcr->status_offset = 8; dcr->status_size = 4; + offset += dcr->header.length; - offset = offset + sizeof(struct acpi_nfit_control_region); /* dcr-descriptor4: pmem */ dcr = nfit_buf + offset; dcr->header.type = ACPI_NFIT_TYPE_CONTROL_REGION; @@ -1909,21 +1977,20 @@ static void nfit_test0_setup(struct nfit_test *t) dcr->serial_number = ~handle[4]; dcr->code = NFIT_FIC_BYTEN; dcr->windows = 0; + offset += dcr->header.length; - offset = offset + offsetof(struct acpi_nfit_control_region, - window_size); /* bdw4 (spa/dcr4, dimm4) */ bdw = nfit_buf + offset; bdw->header.type = ACPI_NFIT_TYPE_DATA_REGION; - bdw->header.length = sizeof(struct acpi_nfit_data_region); + bdw->header.length = sizeof(*bdw); bdw->region_index = 8+1; bdw->windows = 1; bdw->offset = 0; bdw->size = BDW_SIZE; bdw->capacity = DIMM_SIZE; bdw->start_address = 0; + offset += bdw->header.length; - offset = offset + sizeof(struct acpi_nfit_data_region); /* spa10 (dcr4) dimm4 */ spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; @@ -1932,30 +1999,32 @@ static void nfit_test0_setup(struct nfit_test *t) spa->range_index = 10+1; spa->address = t->dcr_dma[4]; spa->length = DCR_SIZE; + offset += spa->header.length; /* * spa11 (single-dimm interleave for hotplug, note storage * does not actually alias the related block-data-window * regions) */ - spa = nfit_buf + offset + sizeof(*spa); + spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; spa->header.length = sizeof(*spa); memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_PM), 16); spa->range_index = 11+1; spa->address = t->spa_set_dma[2]; spa->length = SPA0_SIZE; + offset += spa->header.length; /* spa12 (bdw for dcr4) dimm4 */ - spa = nfit_buf + offset + sizeof(*spa) * 2; + spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; spa->header.length = sizeof(*spa); memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_BDW), 16); spa->range_index = 12+1; spa->address = t->dimm_dma[4]; spa->length = DIMM_SIZE; + offset += spa->header.length; - offset = offset + sizeof(*spa) * 3; /* mem-region14 (spa/dcr4, dimm4) */ memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; @@ -1970,10 +2039,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->address = 0; memdev->interleave_index = 0; memdev->interleave_ways = 1; + offset += memdev->header.length; - /* mem-region15 (spa0, dimm4) */ - memdev = nfit_buf + offset + - sizeof(struct acpi_nfit_memory_map); + /* mem-region15 (spa11, dimm4) */ + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[4]; @@ -1987,10 +2056,10 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->interleave_index = 0; memdev->interleave_ways = 1; memdev->flags = ACPI_NFIT_MEM_HEALTH_ENABLED; + offset += memdev->header.length; /* mem-region16 (spa/bdw4, dimm4) */ - memdev = nfit_buf + offset + - sizeof(struct acpi_nfit_memory_map) * 2; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); memdev->device_handle = handle[4]; @@ -2003,8 +2072,8 @@ static void nfit_test0_setup(struct nfit_test *t) memdev->address = 0; memdev->interleave_index = 0; memdev->interleave_ways = 1; + offset += memdev->header.length; - offset = offset + sizeof(struct acpi_nfit_memory_map) * 3; /* flush3 (dimm4) */ flush = nfit_buf + offset; flush->header.type = ACPI_NFIT_TYPE_FLUSH_ADDRESS; @@ -2014,8 +2083,14 @@ static void nfit_test0_setup(struct nfit_test *t) for (i = 0; i < NUM_HINTS; i++) flush->hint_address[i] = t->flush_dma[4] + i * sizeof(u64); + offset += flush->header.length; + + /* sanity check to make sure we've filled the buffer */ + WARN_ON(offset != t->nfit_size); } + t->nfit_filled = offset; + post_ars_status(&t->ars_state, &t->badrange, t->spa_set_dma[0], SPA0_SIZE); @@ -2026,6 +2101,7 @@ static void nfit_test0_setup(struct nfit_test *t) set_bit(ND_INTEL_SMART, &acpi_desc->dimm_cmd_force_en); set_bit(ND_INTEL_SMART_THRESHOLD, &acpi_desc->dimm_cmd_force_en); set_bit(ND_INTEL_SMART_SET_THRESHOLD, &acpi_desc->dimm_cmd_force_en); + set_bit(ND_INTEL_SMART_INJECT, &acpi_desc->dimm_cmd_force_en); set_bit(ND_CMD_ARS_CAP, &acpi_desc->bus_cmd_force_en); set_bit(ND_CMD_ARS_START, &acpi_desc->bus_cmd_force_en); set_bit(ND_CMD_ARS_STATUS, &acpi_desc->bus_cmd_force_en); @@ -2061,17 +2137,18 @@ static void nfit_test1_setup(struct nfit_test *t) spa->range_index = 0+1; spa->address = t->spa_set_dma[0]; spa->length = SPA2_SIZE; + offset += spa->header.length; /* virtual cd region */ - spa = nfit_buf + sizeof(*spa); + spa = nfit_buf + offset; spa->header.type = ACPI_NFIT_TYPE_SYSTEM_ADDRESS; spa->header.length = sizeof(*spa); memcpy(spa->range_guid, to_nfit_uuid(NFIT_SPA_VCD), 16); spa->range_index = 0; spa->address = t->spa_set_dma[1]; spa->length = SPA_VCD_SIZE; + offset += spa->header.length; - offset += sizeof(*spa) * 2; /* mem-region0 (spa0, dimm0) */ memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; @@ -2089,8 +2166,8 @@ static void nfit_test1_setup(struct nfit_test *t) memdev->flags = ACPI_NFIT_MEM_SAVE_FAILED | ACPI_NFIT_MEM_RESTORE_FAILED | ACPI_NFIT_MEM_FLUSH_FAILED | ACPI_NFIT_MEM_HEALTH_OBSERVED | ACPI_NFIT_MEM_NOT_ARMED; + offset += memdev->header.length; - offset += sizeof(*memdev); /* dcr-descriptor0 */ dcr = nfit_buf + offset; dcr->header.type = ACPI_NFIT_TYPE_CONTROL_REGION; @@ -2101,8 +2178,8 @@ static void nfit_test1_setup(struct nfit_test *t) dcr->serial_number = ~handle[5]; dcr->code = NFIT_FIC_BYTE; dcr->windows = 0; - offset += dcr->header.length; + memdev = nfit_buf + offset; memdev->header.type = ACPI_NFIT_TYPE_MEMORY_MAP; memdev->header.length = sizeof(*memdev); @@ -2117,9 +2194,9 @@ static void nfit_test1_setup(struct nfit_test *t) memdev->interleave_index = 0; memdev->interleave_ways = 1; memdev->flags = ACPI_NFIT_MEM_MAP_FAILED; + offset += memdev->header.length; /* dcr-descriptor1 */ - offset += sizeof(*memdev); dcr = nfit_buf + offset; dcr->header.type = ACPI_NFIT_TYPE_CONTROL_REGION; dcr->header.length = offsetof(struct acpi_nfit_control_region, @@ -2129,6 +2206,12 @@ static void nfit_test1_setup(struct nfit_test *t) dcr->serial_number = ~handle[6]; dcr->code = NFIT_FIC_BYTE; dcr->windows = 0; + offset += dcr->header.length; + + /* sanity check to make sure we've filled the buffer */ + WARN_ON(offset != t->nfit_size); + + t->nfit_filled = offset; post_ars_status(&t->ars_state, &t->badrange, t->spa_set_dma[0], SPA2_SIZE); @@ -2487,7 +2570,7 @@ static int nfit_test_probe(struct platform_device *pdev) nd_desc->ndctl = nfit_test_ctl; rc = acpi_nfit_init(acpi_desc, nfit_test->nfit_buf, - nfit_test->nfit_size); + nfit_test->nfit_filled); if (rc) return rc; diff --git a/tools/testing/nvdimm/test/nfit_test.h b/tools/testing/nvdimm/test/nfit_test.h index 428344519cdf..33752e06ff8d 100644 --- a/tools/testing/nvdimm/test/nfit_test.h +++ b/tools/testing/nvdimm/test/nfit_test.h @@ -93,6 +93,7 @@ struct nd_cmd_ars_err_inj_stat { #define ND_INTEL_FW_FINISH_UPDATE 15 #define ND_INTEL_FW_FINISH_QUERY 16 #define ND_INTEL_SMART_SET_THRESHOLD 17 +#define ND_INTEL_SMART_INJECT 18 #define ND_INTEL_SMART_HEALTH_VALID (1 << 0) #define ND_INTEL_SMART_SPARES_VALID (1 << 1) @@ -111,6 +112,10 @@ struct nd_cmd_ars_err_inj_stat { #define ND_INTEL_SMART_NON_CRITICAL_HEALTH (1 << 0) #define ND_INTEL_SMART_CRITICAL_HEALTH (1 << 1) #define ND_INTEL_SMART_FATAL_HEALTH (1 << 2) +#define ND_INTEL_SMART_INJECT_MTEMP (1 << 0) +#define ND_INTEL_SMART_INJECT_SPARE (1 << 1) +#define ND_INTEL_SMART_INJECT_FATAL (1 << 2) +#define ND_INTEL_SMART_INJECT_SHUTDOWN (1 << 3) struct nd_intel_smart { __u32 status; @@ -158,6 +163,17 @@ struct nd_intel_smart_set_threshold { __u32 status; } __packed; +struct nd_intel_smart_inject { + __u64 flags; + __u8 mtemp_enable; + __u16 media_temperature; + __u8 spare_enable; + __u8 spares; + __u8 fatal_enable; + __u8 unsafe_shutdown_enable; + __u32 status; +} __packed; + #define INTEL_FW_STORAGE_SIZE 0x100000 #define INTEL_FW_MAX_SEND_LEN 0xFFEC #define INTEL_FW_QUERY_INTERVAL 250000 diff --git a/tools/testing/radix-tree/linux/gfp.h b/tools/testing/radix-tree/linux/gfp.h index e3201ccf54c3..32159c08a52e 100644 --- a/tools/testing/radix-tree/linux/gfp.h +++ b/tools/testing/radix-tree/linux/gfp.h @@ -19,6 +19,7 @@ #define __GFP_RECLAIM (__GFP_DIRECT_RECLAIM|__GFP_KSWAPD_RECLAIM) +#define GFP_ZONEMASK 0x0fu #define GFP_ATOMIC (__GFP_HIGH|__GFP_ATOMIC|__GFP_KSWAPD_RECLAIM) #define GFP_KERNEL (__GFP_RECLAIM | __GFP_IO | __GFP_FS) #define GFP_NOWAIT (__GFP_KSWAPD_RECLAIM) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 2fc410bc4f33..32aafa92074c 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -25,6 +25,7 @@ TARGETS += mqueue TARGETS += net TARGETS += nsfs TARGETS += powerpc +TARGETS += proc TARGETS += pstore TARGETS += ptrace TARGETS += seccomp diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions index df3dd7fe5f9b..2a4f16fc9819 100644 --- a/tools/testing/selftests/ftrace/test.d/functions +++ b/tools/testing/selftests/ftrace/test.d/functions @@ -59,6 +59,13 @@ disable_events() { echo 0 > events/enable } +clear_synthetic_events() { # reset all current synthetic events + grep -v ^# synthetic_events | + while read line; do + echo "!$line" >> synthetic_events + done +} + initialize_ftrace() { # Reset ftrace to initial-state # As the initial state, ftrace will be set to nop tracer, # no events, no triggers, no filters, no function filters, diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-extended-error-support.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-extended-error-support.tc new file mode 100644 index 000000000000..786dce7e48be --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-extended-error-support.tc @@ -0,0 +1,39 @@ +#!/bin/sh +# description: event trigger - test extended error support + + +do_reset() { + reset_trigger + echo > set_event + clear_trace +} + +fail() { #msg + do_reset + echo $1 + exit_fail +} + +if [ ! -f set_event ]; then + echo "event tracing is not supported" + exit_unsupported +fi + +if [ ! -f synthetic_events ]; then + echo "synthetic event is not supported" + exit_unsupported +fi + +reset_tracer +do_reset + +echo "Test extended error support" +echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger +echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' >> events/sched/sched_wakeup/trigger &>/dev/null +if ! grep -q "ERROR:" events/sched/sched_wakeup/hist; then + fail "Failed to generate extended error in histogram" +fi + +do_reset + +exit 0 diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc new file mode 100644 index 000000000000..7fd5b4a8f060 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-field-variable-support.tc @@ -0,0 +1,54 @@ +#!/bin/sh +# description: event trigger - test field variable support + +do_reset() { + reset_trigger + echo > set_event + clear_trace +} + +fail() { #msg + do_reset + echo $1 + exit_fail +} + +if [ ! -f set_event ]; then + echo "event tracing is not supported" + exit_unsupported +fi + +if [ ! -f synthetic_events ]; then + echo "synthetic event is not supported" + exit_unsupported +fi + +clear_synthetic_events +reset_tracer +do_reset + +echo "Test field variable support" + +echo 'wakeup_latency u64 lat; pid_t pid; int prio; char comm[16]' > synthetic_events +echo 'hist:keys=comm:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_waking/trigger +echo 'hist:keys=next_comm:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,sched.sched_waking.prio,next_comm) if next_comm=="ping"' > events/sched/sched_switch/trigger +echo 'hist:keys=pid,prio,comm:vals=lat:sort=pid,prio' > events/synthetic/wakeup_latency/trigger + +ping localhost -c 3 +if ! grep -q "ping" events/synthetic/wakeup_latency/hist; then + fail "Failed to create inter-event histogram" +fi + +if ! grep -q "synthetic_prio=prio" events/sched/sched_waking/hist; then + fail "Failed to create histogram with field variable" +fi + +echo '!hist:keys=next_comm:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).wakeup_latency($wakeup_lat,next_pid,sched.sched_waking.prio,next_comm) if next_comm=="ping"' >> events/sched/sched_switch/trigger + +if grep -q "synthetic_prio=prio" events/sched/sched_waking/hist; then + fail "Failed to remove histogram with field variable" +fi + +do_reset + +exit 0 diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc new file mode 100644 index 000000000000..c93dbe38b5df --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-inter-event-combined-hist.tc @@ -0,0 +1,58 @@ +#!/bin/sh +# description: event trigger - test inter-event combined histogram trigger + +do_reset() { + reset_trigger + echo > set_event + clear_trace +} + +fail() { #msg + do_reset + echo $1 + exit_fail +} + +if [ ! -f set_event ]; then + echo "event tracing is not supported" + exit_unsupported +fi + +if [ ! -f synthetic_events ]; then + echo "synthetic event is not supported" + exit_unsupported +fi + +reset_tracer +do_reset +clear_synthetic_events + +echo "Test create synthetic event" + +echo 'waking_latency u64 lat pid_t pid' > synthetic_events +if [ ! -d events/synthetic/waking_latency ]; then + fail "Failed to create waking_latency synthetic event" +fi + +echo "Test combined histogram" + +echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_waking/trigger +echo 'hist:keys=pid:waking_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_waking).waking_latency($waking_lat,pid) if comm=="ping"' > events/sched/sched_wakeup/trigger +echo 'hist:keys=pid,lat:sort=pid,lat' > events/synthetic/waking_latency/trigger + +echo 'wakeup_latency u64 lat pid_t pid' >> synthetic_events +echo 'hist:keys=pid:ts1=common_timestamp.usecs if comm=="ping"' >> events/sched/sched_wakeup/trigger +echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts1:onmatch(sched.sched_wakeup).wakeup_latency($wakeup_lat,next_pid) if next_comm=="ping"' > events/sched/sched_switch/trigger + +echo 'waking+wakeup_latency u64 lat; pid_t pid' >> synthetic_events +echo 'hist:keys=pid,lat:sort=pid,lat:ww_lat=$waking_lat+$wakeup_lat:onmatch(synthetic.wakeup_latency).waking+wakeup_latency($ww_lat,pid)' >> events/synthetic/wakeup_latency/trigger +echo 'hist:keys=pid,lat:sort=pid,lat' >> events/synthetic/waking+wakeup_latency/trigger + +ping localhost -c 3 +if ! grep -q "pid:" events/synthetic/waking+wakeup_latency/hist; then + fail "Failed to create combined histogram" +fi + +do_reset + +exit 0 diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc new file mode 100644 index 000000000000..e84e7d048566 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-action-hist.tc @@ -0,0 +1,50 @@ +#!/bin/sh +# description: event trigger - test inter-event histogram trigger onmatch action + +do_reset() { + reset_trigger + echo > set_event + clear_trace +} + +fail() { #msg + do_reset + echo $1 + exit_fail +} + +if [ ! -f set_event ]; then + echo "event tracing is not supported" + exit_unsupported +fi + +if [ ! -f synthetic_events ]; then + echo "synthetic event is not supported" + exit_unsupported +fi + +clear_synthetic_events +reset_tracer +do_reset + +echo "Test create synthetic event" + +echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events +if [ ! -d events/synthetic/wakeup_latency ]; then + fail "Failed to create wakeup_latency synthetic event" +fi + +echo "Test create histogram for synthetic event" +echo "Test histogram variables,simple expression support and onmatch action" + +echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger +echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).wakeup_latency($wakeup_lat,next_pid,next_comm) if next_comm=="ping"' > events/sched/sched_switch/trigger +echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > events/synthetic/wakeup_latency/trigger +ping localhost -c 5 +if ! grep -q "ping" events/synthetic/wakeup_latency/hist; then + fail "Failed to create onmatch action inter-event histogram" +fi + +do_reset + +exit 0 diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc new file mode 100644 index 000000000000..7907d8aacde3 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmatch-onmax-action-hist.tc @@ -0,0 +1,50 @@ +#!/bin/sh +# description: event trigger - test inter-event histogram trigger onmatch-onmax action + +do_reset() { + reset_trigger + echo > set_event + clear_trace +} + +fail() { #msg + do_reset + echo $1 + exit_fail +} + +if [ ! -f set_event ]; then + echo "event tracing is not supported" + exit_unsupported +fi + +if [ ! -f synthetic_events ]; then + echo "synthetic event is not supported" + exit_unsupported +fi + +clear_synthetic_events +reset_tracer +do_reset + +echo "Test create synthetic event" + +echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events +if [ ! -d events/synthetic/wakeup_latency ]; then + fail "Failed to create wakeup_latency synthetic event" +fi + +echo "Test create histogram for synthetic event" +echo "Test histogram variables,simple expression support and onmatch-onmax action" + +echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' > events/sched/sched_wakeup/trigger +echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmatch(sched.sched_wakeup).wakeup_latency($wakeup_lat,next_pid,next_comm):onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) if next_comm=="ping"' >> events/sched/sched_switch/trigger +echo 'hist:keys=comm,pid,lat:wakeup_lat=lat:sort=lat' > events/synthetic/wakeup_latency/trigger +ping localhost -c 5 +if [ ! grep -q "ping" events/synthetic/wakeup_latency/hist -o ! grep -q "max:" events/sched/sched_switch/hist]; then + fail "Failed to create onmatch-onmax action inter-event histogram" +fi + +do_reset + +exit 0 diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc new file mode 100644 index 000000000000..38b7ed6242b2 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-onmax-action-hist.tc @@ -0,0 +1,48 @@ +#!/bin/sh +# description: event trigger - test inter-event histogram trigger onmax action + +do_reset() { + reset_trigger + echo > set_event + clear_trace +} + +fail() { #msg + do_reset + echo $1 + exit_fail +} + +if [ ! -f set_event ]; then + echo "event tracing is not supported" + exit_unsupported +fi + +if [ ! -f synthetic_events ]; then + echo "synthetic event is not supported" + exit_unsupported +fi + +clear_synthetic_events +reset_tracer +do_reset + +echo "Test create synthetic event" + +echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events +if [ ! -d events/synthetic/wakeup_latency ]; then + fail "Failed to create wakeup_latency synthetic event" +fi + +echo "Test onmax action" + +echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="ping"' >> events/sched/sched_waking/trigger +echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_comm,prev_pid,prev_prio,prev_comm) if next_comm=="ping"' >> events/sched/sched_switch/trigger +ping localhost -c 3 +if ! grep -q "max:" events/sched/sched_switch/hist; then + fail "Failed to create onmax action inter-event histogram" +fi + +do_reset + +exit 0 diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-createremove.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-createremove.tc new file mode 100644 index 000000000000..cef11377dcbd --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-event-createremove.tc @@ -0,0 +1,54 @@ +#!/bin/sh +# description: event trigger - test synthetic event create remove +do_reset() { + reset_trigger + echo > set_event + clear_trace +} + +fail() { #msg + do_reset + echo $1 + exit_fail +} + +if [ ! -f set_event ]; then + echo "event tracing is not supported" + exit_unsupported +fi + +if [ ! -f synthetic_events ]; then + echo "synthetic event is not supported" + exit_unsupported +fi + +clear_synthetic_events +reset_tracer +do_reset + +echo "Test create synthetic event" + +echo 'wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events +if [ ! -d events/synthetic/wakeup_latency ]; then + fail "Failed to create wakeup_latency synthetic event" +fi + +reset_trigger + +echo "Test create synthetic event with an error" +echo 'wakeup_latency u64 lat pid_t pid char' > synthetic_events > /dev/null +if [ -d events/synthetic/wakeup_latency ]; then + fail "Created wakeup_latency synthetic event with an invalid format" +fi + +reset_trigger + +echo "Test remove synthetic event" +echo '!wakeup_latency u64 lat pid_t pid char comm[16]' > synthetic_events +if [ -d events/synthetic/wakeup_latency ]; then + fail "Failed to delete wakeup_latency synthetic event" +fi + +do_reset + +exit 0 diff --git a/tools/testing/selftests/proc/.gitignore b/tools/testing/selftests/proc/.gitignore new file mode 100644 index 000000000000..6c16f77c722c --- /dev/null +++ b/tools/testing/selftests/proc/.gitignore @@ -0,0 +1,8 @@ +/proc-loadavg-001 +/proc-self-map-files-001 +/proc-self-map-files-002 +/proc-self-syscall +/proc-self-wchan +/proc-uptime-001 +/proc-uptime-002 +/read diff --git a/tools/testing/selftests/proc/Makefile b/tools/testing/selftests/proc/Makefile new file mode 100644 index 000000000000..dbb87e56264c --- /dev/null +++ b/tools/testing/selftests/proc/Makefile @@ -0,0 +1,13 @@ +CFLAGS += -Wall -O2 + +TEST_GEN_PROGS := +TEST_GEN_PROGS += proc-loadavg-001 +TEST_GEN_PROGS += proc-self-map-files-001 +TEST_GEN_PROGS += proc-self-map-files-002 +TEST_GEN_PROGS += proc-self-syscall +TEST_GEN_PROGS += proc-self-wchan +TEST_GEN_PROGS += proc-uptime-001 +TEST_GEN_PROGS += proc-uptime-002 +TEST_GEN_PROGS += read + +include ../lib.mk diff --git a/tools/testing/selftests/proc/config b/tools/testing/selftests/proc/config new file mode 100644 index 000000000000..68fbd2b35884 --- /dev/null +++ b/tools/testing/selftests/proc/config @@ -0,0 +1 @@ +CONFIG_PROC_FS=y diff --git a/tools/testing/selftests/proc/proc-loadavg-001.c b/tools/testing/selftests/proc/proc-loadavg-001.c new file mode 100644 index 000000000000..e38ad6d94d4b --- /dev/null +++ b/tools/testing/selftests/proc/proc-loadavg-001.c @@ -0,0 +1,83 @@ +/* + * Copyright _ 2018 Alexey Dobriyan <adobriyan@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +/* Test that /proc/loadavg correctly reports last pid in pid namespace. */ +#define _GNU_SOURCE +#include <errno.h> +#include <sched.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> +#include <sys/wait.h> + +int main(void) +{ + pid_t pid; + int wstatus; + + if (unshare(CLONE_NEWPID) == -1) { + if (errno == ENOSYS || errno == EPERM) + return 2; + return 1; + } + + pid = fork(); + if (pid == -1) + return 1; + if (pid == 0) { + char buf[128], *p; + int fd; + ssize_t rv; + + fd = open("/proc/loadavg" , O_RDONLY); + if (fd == -1) + return 1; + rv = read(fd, buf, sizeof(buf)); + if (rv < 3) + return 1; + p = buf + rv; + + /* pid 1 */ + if (!(p[-3] == ' ' && p[-2] == '1' && p[-1] == '\n')) + return 1; + + pid = fork(); + if (pid == -1) + return 1; + if (pid == 0) + return 0; + if (waitpid(pid, NULL, 0) == -1) + return 1; + + lseek(fd, 0, SEEK_SET); + rv = read(fd, buf, sizeof(buf)); + if (rv < 3) + return 1; + p = buf + rv; + + /* pid 2 */ + if (!(p[-3] == ' ' && p[-2] == '2' && p[-1] == '\n')) + return 1; + + return 0; + } + + if (waitpid(pid, &wstatus, 0) == -1) + return 1; + if (WIFEXITED(wstatus) && WEXITSTATUS(wstatus) == 0) + return 0; + return 1; +} diff --git a/tools/testing/selftests/proc/proc-self-map-files-001.c b/tools/testing/selftests/proc/proc-self-map-files-001.c new file mode 100644 index 000000000000..af1d0a6af810 --- /dev/null +++ b/tools/testing/selftests/proc/proc-self-map-files-001.c @@ -0,0 +1,82 @@ +/* + * Copyright _ 2018 Alexey Dobriyan <adobriyan@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +/* Test readlink /proc/self/map_files/... */ +#include <errno.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <stdio.h> +#include <unistd.h> +#include <sys/mman.h> +#include <stdlib.h> + +static void pass(const char *fmt, unsigned long a, unsigned long b) +{ + char name[64]; + char buf[64]; + + snprintf(name, sizeof(name), fmt, a, b); + if (readlink(name, buf, sizeof(buf)) == -1) + exit(1); +} + +static void fail(const char *fmt, unsigned long a, unsigned long b) +{ + char name[64]; + char buf[64]; + + snprintf(name, sizeof(name), fmt, a, b); + if (readlink(name, buf, sizeof(buf)) == -1 && errno == ENOENT) + return; + exit(1); +} + +int main(void) +{ + const unsigned int PAGE_SIZE = sysconf(_SC_PAGESIZE); + void *p; + int fd; + unsigned long a, b; + + fd = open("/dev/zero", O_RDONLY); + if (fd == -1) + return 1; + + p = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_PRIVATE|MAP_FILE, fd, 0); + if (p == MAP_FAILED) + return 1; + + a = (unsigned long)p; + b = (unsigned long)p + PAGE_SIZE; + + pass("/proc/self/map_files/%lx-%lx", a, b); + fail("/proc/self/map_files/ %lx-%lx", a, b); + fail("/proc/self/map_files/%lx -%lx", a, b); + fail("/proc/self/map_files/%lx- %lx", a, b); + fail("/proc/self/map_files/%lx-%lx ", a, b); + fail("/proc/self/map_files/0%lx-%lx", a, b); + fail("/proc/self/map_files/%lx-0%lx", a, b); + if (sizeof(long) == 4) { + fail("/proc/self/map_files/100000000%lx-%lx", a, b); + fail("/proc/self/map_files/%lx-100000000%lx", a, b); + } else if (sizeof(long) == 8) { + fail("/proc/self/map_files/10000000000000000%lx-%lx", a, b); + fail("/proc/self/map_files/%lx-10000000000000000%lx", a, b); + } else + return 1; + + return 0; +} diff --git a/tools/testing/selftests/proc/proc-self-map-files-002.c b/tools/testing/selftests/proc/proc-self-map-files-002.c new file mode 100644 index 000000000000..aebf4be56111 --- /dev/null +++ b/tools/testing/selftests/proc/proc-self-map-files-002.c @@ -0,0 +1,85 @@ +/* + * Copyright _ 2018 Alexey Dobriyan <adobriyan@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +/* Test readlink /proc/self/map_files/... with address 0. */ +#include <errno.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <stdio.h> +#include <unistd.h> +#include <sys/mman.h> +#include <stdlib.h> + +static void pass(const char *fmt, unsigned long a, unsigned long b) +{ + char name[64]; + char buf[64]; + + snprintf(name, sizeof(name), fmt, a, b); + if (readlink(name, buf, sizeof(buf)) == -1) + exit(1); +} + +static void fail(const char *fmt, unsigned long a, unsigned long b) +{ + char name[64]; + char buf[64]; + + snprintf(name, sizeof(name), fmt, a, b); + if (readlink(name, buf, sizeof(buf)) == -1 && errno == ENOENT) + return; + exit(1); +} + +int main(void) +{ + const unsigned int PAGE_SIZE = sysconf(_SC_PAGESIZE); + void *p; + int fd; + unsigned long a, b; + + fd = open("/dev/zero", O_RDONLY); + if (fd == -1) + return 1; + + p = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_PRIVATE|MAP_FILE|MAP_FIXED, fd, 0); + if (p == MAP_FAILED) { + if (errno == EPERM) + return 2; + return 1; + } + + a = (unsigned long)p; + b = (unsigned long)p + PAGE_SIZE; + + pass("/proc/self/map_files/%lx-%lx", a, b); + fail("/proc/self/map_files/ %lx-%lx", a, b); + fail("/proc/self/map_files/%lx -%lx", a, b); + fail("/proc/self/map_files/%lx- %lx", a, b); + fail("/proc/self/map_files/%lx-%lx ", a, b); + fail("/proc/self/map_files/0%lx-%lx", a, b); + fail("/proc/self/map_files/%lx-0%lx", a, b); + if (sizeof(long) == 4) { + fail("/proc/self/map_files/100000000%lx-%lx", a, b); + fail("/proc/self/map_files/%lx-100000000%lx", a, b); + } else if (sizeof(long) == 8) { + fail("/proc/self/map_files/10000000000000000%lx-%lx", a, b); + fail("/proc/self/map_files/%lx-10000000000000000%lx", a, b); + } else + return 1; + + return 0; +} diff --git a/tools/testing/selftests/proc/proc-self-syscall.c b/tools/testing/selftests/proc/proc-self-syscall.c new file mode 100644 index 000000000000..05eb6f91f1e9 --- /dev/null +++ b/tools/testing/selftests/proc/proc-self-syscall.c @@ -0,0 +1,45 @@ +#define _GNU_SOURCE +#include <unistd.h> +#include <sys/syscall.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <errno.h> +#include <unistd.h> +#include <string.h> +#include <stdio.h> + +static inline ssize_t sys_read(int fd, void *buf, size_t len) +{ + return syscall(SYS_read, fd, buf, len); +} + +int main(void) +{ + char buf1[64]; + char buf2[64]; + int fd; + ssize_t rv; + + fd = open("/proc/self/syscall", O_RDONLY); + if (fd == -1) { + if (errno == ENOENT) + return 2; + return 1; + } + + /* Do direct system call as libc can wrap anything. */ + snprintf(buf1, sizeof(buf1), "%ld 0x%lx 0x%lx 0x%lx", + (long)SYS_read, (long)fd, (long)buf2, (long)sizeof(buf2)); + + memset(buf2, 0, sizeof(buf2)); + rv = sys_read(fd, buf2, sizeof(buf2)); + if (rv < 0) + return 1; + if (rv < strlen(buf1)) + return 1; + if (strncmp(buf1, buf2, strlen(buf1)) != 0) + return 1; + + return 0; +} diff --git a/tools/testing/selftests/proc/proc-self-wchan.c b/tools/testing/selftests/proc/proc-self-wchan.c new file mode 100644 index 000000000000..b8d8728a6869 --- /dev/null +++ b/tools/testing/selftests/proc/proc-self-wchan.c @@ -0,0 +1,25 @@ +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <errno.h> +#include <unistd.h> + +int main(void) +{ + char buf[64]; + int fd; + + fd = open("/proc/self/wchan", O_RDONLY); + if (fd == -1) { + if (errno == ENOENT) + return 2; + return 1; + } + + buf[0] = '\0'; + if (read(fd, buf, sizeof(buf)) != 1) + return 1; + if (buf[0] != '0') + return 1; + return 0; +} diff --git a/tools/testing/selftests/proc/proc-uptime-001.c b/tools/testing/selftests/proc/proc-uptime-001.c new file mode 100644 index 000000000000..303f26092306 --- /dev/null +++ b/tools/testing/selftests/proc/proc-uptime-001.c @@ -0,0 +1,45 @@ +/* + * Copyright _ 2018 Alexey Dobriyan <adobriyan@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +// Test that values in /proc/uptime increment monotonically. +#undef NDEBUG +#include <assert.h> +#include <stdint.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> + +#include "proc-uptime.h" + +int main(void) +{ + uint64_t start, u0, u1, i0, i1; + int fd; + + fd = open("/proc/uptime", O_RDONLY); + assert(fd >= 0); + + proc_uptime(fd, &u0, &i0); + start = u0; + do { + proc_uptime(fd, &u1, &i1); + assert(u1 >= u0); + assert(i1 >= i0); + u0 = u1; + i0 = i1; + } while (u1 - start < 100); + + return 0; +} diff --git a/tools/testing/selftests/proc/proc-uptime-002.c b/tools/testing/selftests/proc/proc-uptime-002.c new file mode 100644 index 000000000000..0cb79e1f1674 --- /dev/null +++ b/tools/testing/selftests/proc/proc-uptime-002.c @@ -0,0 +1,79 @@ +/* + * Copyright _ 2018 Alexey Dobriyan <adobriyan@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +// Test that values in /proc/uptime increment monotonically +// while shifting across CPUs. +#define _GNU_SOURCE +#undef NDEBUG +#include <assert.h> +#include <unistd.h> +#include <sys/syscall.h> +#include <stdlib.h> +#include <string.h> + +#include <stdint.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> + +#include "proc-uptime.h" + +static inline int sys_sched_getaffinity(pid_t pid, unsigned int len, unsigned long *m) +{ + return syscall(SYS_sched_getaffinity, pid, len, m); +} + +static inline int sys_sched_setaffinity(pid_t pid, unsigned int len, unsigned long *m) +{ + return syscall(SYS_sched_setaffinity, pid, len, m); +} + +int main(void) +{ + unsigned int len; + unsigned long *m; + unsigned int cpu; + uint64_t u0, u1, i0, i1; + int fd; + + /* find out "nr_cpu_ids" */ + m = NULL; + len = 0; + do { + len += sizeof(unsigned long); + free(m); + m = malloc(len); + } while (sys_sched_getaffinity(0, len, m) == -EINVAL); + + fd = open("/proc/uptime", O_RDONLY); + assert(fd >= 0); + + proc_uptime(fd, &u0, &i0); + for (cpu = 0; cpu < len * 8; cpu++) { + memset(m, 0, len); + m[cpu / (8 * sizeof(unsigned long))] |= 1UL << (cpu % (8 * sizeof(unsigned long))); + + /* CPU might not exist, ignore error */ + sys_sched_setaffinity(0, len, m); + + proc_uptime(fd, &u1, &i1); + assert(u1 >= u0); + assert(i1 >= i0); + u0 = u1; + i0 = i1; + } + + return 0; +} diff --git a/tools/testing/selftests/proc/proc-uptime.h b/tools/testing/selftests/proc/proc-uptime.h new file mode 100644 index 000000000000..d584419f50a7 --- /dev/null +++ b/tools/testing/selftests/proc/proc-uptime.h @@ -0,0 +1,74 @@ +/* + * Copyright _ 2018 Alexey Dobriyan <adobriyan@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#undef NDEBUG +#include <assert.h> +#include <errno.h> +#include <string.h> +#include <stdlib.h> +#include <unistd.h> + +static unsigned long long xstrtoull(const char *p, char **end) +{ + if (*p == '0') { + *end = (char *)p + 1; + return 0; + } else if ('1' <= *p && *p <= '9') { + unsigned long long val; + + errno = 0; + val = strtoull(p, end, 10); + assert(errno == 0); + return val; + } else + assert(0); +} + +static void proc_uptime(int fd, uint64_t *uptime, uint64_t *idle) +{ + uint64_t val1, val2; + char buf[64], *p; + ssize_t rv; + + /* save "p < end" checks */ + memset(buf, 0, sizeof(buf)); + rv = pread(fd, buf, sizeof(buf), 0); + assert(0 <= rv && rv <= sizeof(buf)); + buf[sizeof(buf) - 1] = '\0'; + + p = buf; + + val1 = xstrtoull(p, &p); + assert(p[0] == '.'); + assert('0' <= p[1] && p[1] <= '9'); + assert('0' <= p[2] && p[2] <= '9'); + assert(p[3] == ' '); + + val2 = (p[1] - '0') * 10 + p[2] - '0'; + *uptime = val1 * 100 + val2; + + p += 4; + + val1 = xstrtoull(p, &p); + assert(p[0] == '.'); + assert('0' <= p[1] && p[1] <= '9'); + assert('0' <= p[2] && p[2] <= '9'); + assert(p[3] == '\n'); + + val2 = (p[1] - '0') * 10 + p[2] - '0'; + *idle = val1 * 100 + val2; + + assert(p + 4 == buf + rv); +} diff --git a/tools/testing/selftests/proc/read.c b/tools/testing/selftests/proc/read.c new file mode 100644 index 000000000000..12e397f78592 --- /dev/null +++ b/tools/testing/selftests/proc/read.c @@ -0,0 +1,147 @@ +/* + * Copyright _ 2018 Alexey Dobriyan <adobriyan@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +// Test +// 1) read of every file in /proc +// 2) readlink of every symlink in /proc +// 3) recursively (1) + (2) for every directory in /proc +// 4) write to /proc/*/clear_refs and /proc/*/task/*/clear_refs +// 5) write to /proc/sysrq-trigger +#undef NDEBUG +#include <assert.h> +#include <errno.h> +#include <sys/types.h> +#include <dirent.h> +#include <stdbool.h> +#include <stdlib.h> +#include <string.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> + +static inline bool streq(const char *s1, const char *s2) +{ + return strcmp(s1, s2) == 0; +} + +static struct dirent *xreaddir(DIR *d) +{ + struct dirent *de; + + errno = 0; + de = readdir(d); + if (!de && errno != 0) { + exit(1); + } + return de; +} + +static void f_reg(DIR *d, const char *filename) +{ + char buf[4096]; + int fd; + ssize_t rv; + + /* read from /proc/kmsg can block */ + fd = openat(dirfd(d), filename, O_RDONLY|O_NONBLOCK); + if (fd == -1) + return; + rv = read(fd, buf, sizeof(buf)); + assert((0 <= rv && rv <= sizeof(buf)) || rv == -1); + close(fd); +} + +static void f_reg_write(DIR *d, const char *filename, const char *buf, size_t len) +{ + int fd; + ssize_t rv; + + fd = openat(dirfd(d), filename, O_WRONLY); + if (fd == -1) + return; + rv = write(fd, buf, len); + assert((0 <= rv && rv <= len) || rv == -1); + close(fd); +} + +static void f_lnk(DIR *d, const char *filename) +{ + char buf[4096]; + ssize_t rv; + + rv = readlinkat(dirfd(d), filename, buf, sizeof(buf)); + assert((0 <= rv && rv <= sizeof(buf)) || rv == -1); +} + +static void f(DIR *d, unsigned int level) +{ + struct dirent *de; + + de = xreaddir(d); + assert(de->d_type == DT_DIR); + assert(streq(de->d_name, ".")); + + de = xreaddir(d); + assert(de->d_type == DT_DIR); + assert(streq(de->d_name, "..")); + + while ((de = xreaddir(d))) { + assert(!streq(de->d_name, ".")); + assert(!streq(de->d_name, "..")); + + switch (de->d_type) { + DIR *dd; + int fd; + + case DT_REG: + if (level == 0 && streq(de->d_name, "sysrq-trigger")) { + f_reg_write(d, de->d_name, "h", 1); + } else if (level == 1 && streq(de->d_name, "clear_refs")) { + f_reg_write(d, de->d_name, "1", 1); + } else if (level == 3 && streq(de->d_name, "clear_refs")) { + f_reg_write(d, de->d_name, "1", 1); + } else { + f_reg(d, de->d_name); + } + break; + case DT_DIR: + fd = openat(dirfd(d), de->d_name, O_DIRECTORY|O_RDONLY); + if (fd == -1) + continue; + dd = fdopendir(fd); + if (!dd) + continue; + f(dd, level + 1); + closedir(dd); + break; + case DT_LNK: + f_lnk(d, de->d_name); + break; + default: + assert(0); + } + } +} + +int main(void) +{ + DIR *d; + + d = opendir("/proc"); + if (!d) + return 2; + f(d, 0); + return 0; +} |