diff options
Diffstat (limited to 'tools/testing/selftests/net/forwarding')
7 files changed, 535 insertions, 2 deletions
diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile index 91201ab3c4fc..a474c60fe348 100644 --- a/tools/testing/selftests/net/forwarding/Makefile +++ b/tools/testing/selftests/net/forwarding/Makefile @@ -15,6 +15,7 @@ TEST_PROGS = bridge_igmp.sh \ custom_multipath_hash.sh \ dual_vxlan_bridge.sh \ ethtool_extended_state.sh \ + ethtool_mm.sh \ ethtool.sh \ gre_custom_multipath_hash.sh \ gre_inner_v4_multipath.sh \ @@ -85,6 +86,7 @@ TEST_PROGS = bridge_igmp.sh \ tc_mpls_l2vpn.sh \ tc_police.sh \ tc_shblocks.sh \ + tc_tunnel_key.sh \ tc_vlan_modify.sh \ vxlan_asymmetric_ipv6.sh \ vxlan_asymmetric.sh \ diff --git a/tools/testing/selftests/net/forwarding/ethtool_mm.sh b/tools/testing/selftests/net/forwarding/ethtool_mm.sh new file mode 100755 index 000000000000..c580ad623848 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/ethtool_mm.sh @@ -0,0 +1,288 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + manual_with_verification_h1_to_h2 + manual_with_verification_h2_to_h1 + manual_without_verification_h1_to_h2 + manual_without_verification_h2_to_h1 + manual_failed_verification_h1_to_h2 + manual_failed_verification_h2_to_h1 + lldp +" + +NUM_NETIFS=2 +REQUIRE_MZ=no +PREEMPTIBLE_PRIO=0 +source lib.sh + +traffic_test() +{ + local if=$1; shift + local src=$1; shift + local num_pkts=10000 + local before= + local after= + local delta= + + before=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src) + + $MZ $if -q -c $num_pkts -p 64 -b bcast -t ip -R $PREEMPTIBLE_PRIO + + after=$(ethtool_std_stats_get $if "eth-mac" "FramesTransmittedOK" $src) + + delta=$((after - before)) + + # Allow an extra 1% tolerance for random packets sent by the stack + [ $delta -ge $num_pkts ] && [ $delta -le $((num_pkts + 100)) ] +} + +manual_with_verification() +{ + local tx=$1; shift + local rx=$1; shift + + RET=0 + + # It isn't completely clear from IEEE 802.3-2018 Figure 99-5: Transmit + # Processing state diagram whether the "send_r" variable (send response + # to verification frame) should be taken into consideration while the + # MAC Merge TX direction is disabled. That being said, at least the + # NXP ENETC does not, and requires tx-enabled on in order to respond to + # the link partner's verification frames. + ethtool --set-mm $rx tx-enabled on + ethtool --set-mm $tx verify-enabled on tx-enabled on + + # Wait for verification to finish + sleep 1 + + ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ + grep -q 'SUCCEEDED' + check_err "$?" "Verification did not succeed" + + ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' + check_err "$?" "pMAC TX is not active" + + traffic_test $tx "pmac" + check_err "$?" "Traffic did not get sent through $tx's pMAC" + + ethtool --set-mm $tx verify-enabled off tx-enabled off + ethtool --set-mm $rx tx-enabled off + + log_test "Manual configuration with verification: $tx to $rx" +} + +manual_with_verification_h1_to_h2() +{ + manual_with_verification $h1 $h2 +} + +manual_with_verification_h2_to_h1() +{ + manual_with_verification $h2 $h1 +} + +manual_without_verification() +{ + local tx=$1; shift + local rx=$1; shift + + RET=0 + + ethtool --set-mm $tx verify-enabled off tx-enabled on + + ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ + grep -q 'DISABLED' + check_err "$?" "Verification is not disabled" + + ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' + check_err "$?" "pMAC TX is not active" + + traffic_test $tx "pmac" + check_err "$?" "Traffic did not get sent through $tx's pMAC" + + ethtool --set-mm $tx verify-enabled off tx-enabled off + + log_test "Manual configuration without verification: $tx to $rx" +} + +manual_without_verification_h1_to_h2() +{ + manual_without_verification $h1 $h2 +} + +manual_without_verification_h2_to_h1() +{ + manual_without_verification $h2 $h1 +} + +manual_failed_verification() +{ + local tx=$1; shift + local rx=$1; shift + + RET=0 + + ethtool --set-mm $rx pmac-enabled off + ethtool --set-mm $tx verify-enabled on tx-enabled on + + # Wait for verification to time out + sleep 1 + + ethtool --json --show-mm $tx | jq -r '.[]."verify-status"' | \ + grep -q 'SUCCEEDED' + check_fail "$?" "Verification succeeded when it shouldn't have" + + ethtool --json --show-mm $tx | jq -r '.[]."tx-active"' | grep -q 'true' + check_fail "$?" "pMAC TX is active when it shouldn't have" + + traffic_test $tx "emac" + check_err "$?" "Traffic did not get sent through $tx's eMAC" + + ethtool --set-mm $tx verify-enabled off tx-enabled off + ethtool --set-mm $rx pmac-enabled on + + log_test "Manual configuration with failed verification: $tx to $rx" +} + +manual_failed_verification_h1_to_h2() +{ + manual_failed_verification $h1 $h2 +} + +manual_failed_verification_h2_to_h1() +{ + manual_failed_verification $h2 $h1 +} + +lldp_change_add_frag_size() +{ + local add_frag_size=$1 + + lldptool -T -i $h1 -V addEthCaps addFragSize=$add_frag_size >/dev/null + # Wait for TLVs to be received + sleep 2 + lldptool -i $h2 -t -n -V addEthCaps | \ + grep -q "Additional fragment size: $add_frag_size" +} + +lldp() +{ + RET=0 + + systemctl start lldpad + + # Configure the interfaces to receive and transmit LLDPDUs + lldptool -L -i $h1 adminStatus=rxtx >/dev/null + lldptool -L -i $h2 adminStatus=rxtx >/dev/null + + # Enable the transmission of Additional Ethernet Capabilities TLV + lldptool -T -i $h1 -V addEthCaps enableTx=yes >/dev/null + lldptool -T -i $h2 -V addEthCaps enableTx=yes >/dev/null + + # Wait for TLVs to be received + sleep 2 + + lldptool -i $h1 -t -n -V addEthCaps | \ + grep -q "Preemption capability active" + check_err "$?" "$h1 pMAC TX is not active" + + lldptool -i $h2 -t -n -V addEthCaps | \ + grep -q "Preemption capability active" + check_err "$?" "$h2 pMAC TX is not active" + + lldp_change_add_frag_size 3 + check_err "$?" "addFragSize 3" + + lldp_change_add_frag_size 2 + check_err "$?" "addFragSize 2" + + lldp_change_add_frag_size 1 + check_err "$?" "addFragSize 1" + + lldp_change_add_frag_size 0 + check_err "$?" "addFragSize 0" + + traffic_test $h1 "pmac" + check_err "$?" "Traffic did not get sent through $h1's pMAC" + + traffic_test $h2 "pmac" + check_err "$?" "Traffic did not get sent through $h2's pMAC" + + systemctl stop lldpad + + log_test "LLDP" +} + +h1_create() +{ + ip link set dev $h1 up + + tc qdisc add dev $h1 root mqprio num_tc 4 map 0 1 2 3 \ + queues 1@0 1@1 1@2 1@3 \ + fp P E E E \ + hw 1 + + ethtool --set-mm $h1 pmac-enabled on tx-enabled off verify-enabled off +} + +h2_create() +{ + ip link set dev $h2 up + + ethtool --set-mm $h2 pmac-enabled on tx-enabled off verify-enabled off + + tc qdisc add dev $h2 root mqprio num_tc 4 map 0 1 2 3 \ + queues 1@0 1@1 1@2 1@3 \ + fp P E E E \ + hw 1 +} + +h1_destroy() +{ + ethtool --set-mm $h1 pmac-enabled off tx-enabled off verify-enabled off + + tc qdisc del dev $h1 root + + ip link set dev $h1 down +} + +h2_destroy() +{ + tc qdisc del dev $h2 root + + ethtool --set-mm $h2 pmac-enabled off tx-enabled off verify-enabled off + + ip link set dev $h2 down +} + +setup_prepare() +{ + check_ethtool_mm_support + check_tc_fp_support + require_command lldptool + bail_on_lldpad "autoconfigure the MAC Merge layer" "configure it manually" + + h1=${NETIFS[p1]} + h2=${NETIFS[p2]} + + h1_create + h2_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/hw_stats_l3.sh b/tools/testing/selftests/net/forwarding/hw_stats_l3.sh index 9c1f76e108af..432fe8469851 100755 --- a/tools/testing/selftests/net/forwarding/hw_stats_l3.sh +++ b/tools/testing/selftests/net/forwarding/hw_stats_l3.sh @@ -319,6 +319,19 @@ trap cleanup EXIT setup_prepare setup_wait -tests_run +used=$(ip -j stats show dev $rp1.200 group offload subgroup hw_stats_info | + jq '.[].info.l3_stats.used') +kind=$(ip -j -d link show dev $rp1 | + jq -r '.[].linkinfo.info_kind') +if [[ $used != true ]]; then + if [[ $kind == veth ]]; then + log_test_skip "l3_stats not offloaded on veth interface" + EXIT_STATUS=$ksft_skip + else + RET=1 log_test "l3_stats not offloaded" + fi +else + tests_run +fi exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index d47499ba81c7..9ddb68dd6a08 100755 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -120,6 +120,15 @@ check_tc_action_hw_stats_support() fi } +check_tc_fp_support() +{ + tc qdisc add dev lo mqprio help 2>&1 | grep -q "fp " + if [[ $? -ne 0 ]]; then + echo "SKIP: iproute2 too old; tc is missing frame preemption support" + exit $ksft_skip + fi +} + check_ethtool_lanes_support() { ethtool --help 2>&1| grep lanes &> /dev/null @@ -129,6 +138,15 @@ check_ethtool_lanes_support() fi } +check_ethtool_mm_support() +{ + ethtool --help 2>&1| grep -- '--show-mm' &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: ethtool too old; it is missing MAC Merge layer support" + exit $ksft_skip + fi +} + check_locked_port_support() { if ! bridge -d link show | grep -q " locked"; then @@ -773,8 +791,9 @@ tc_rule_handle_stats_get() local id=$1; shift local handle=$1; shift local selector=${1:-.packets}; shift + local netns=${1:-""}; shift - tc -j -s filter show $id \ + tc $netns -j -s filter show $id \ | jq ".[] | select(.options.handle == $handle) | \ .options.actions[0].stats$selector" } @@ -787,6 +806,17 @@ ethtool_stats_get() ethtool -S $dev | grep "^ *$stat:" | head -n 1 | cut -d: -f2 } +ethtool_std_stats_get() +{ + local dev=$1; shift + local grp=$1; shift + local name=$1; shift + local src=$1; shift + + ethtool --json -S $dev --groups $grp -- --src $src | \ + jq '.[]."'"$grp"'"."'$name'"' +} + qdisc_stats_get() { local dev=$1; shift @@ -1887,3 +1917,34 @@ mldv1_done_get() payload_template_expand_checksum "$hbh$icmpv6" $checksum } + +bail_on_lldpad() +{ + local reason1="$1"; shift + local reason2="$1"; shift + + if systemctl is-active --quiet lldpad; then + + cat >/dev/stderr <<-EOF + WARNING: lldpad is running + + lldpad will likely $reason1, and this test will + $reason2. Both are not supported at the same time, + one of them is arbitrarily going to overwrite the + other. That will cause spurious failures (or, unlikely, + passes) of this test. + EOF + + if [[ -z $ALLOW_LLDPAD ]]; then + cat >/dev/stderr <<-EOF + + If you want to run the test anyway, please set + an environment variable ALLOW_LLDPAD to a + non-empty string. + EOF + exit 1 + else + return + fi + fi +} diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_etsprio.sh b/tools/testing/selftests/net/forwarding/sch_tbf_etsprio.sh index 75a37c189ef3..df9bcd6a811a 100644 --- a/tools/testing/selftests/net/forwarding/sch_tbf_etsprio.sh +++ b/tools/testing/selftests/net/forwarding/sch_tbf_etsprio.sh @@ -57,6 +57,10 @@ tbf_root_test() tc qdisc del dev $swp2 root } +if type -t sch_tbf_pre_hook >/dev/null; then + sch_tbf_pre_hook +fi + trap cleanup EXIT setup_prepare diff --git a/tools/testing/selftests/net/forwarding/sch_tbf_root.sh b/tools/testing/selftests/net/forwarding/sch_tbf_root.sh index 72aa21ba88c7..96c997be0d03 100755 --- a/tools/testing/selftests/net/forwarding/sch_tbf_root.sh +++ b/tools/testing/selftests/net/forwarding/sch_tbf_root.sh @@ -23,6 +23,10 @@ tbf_test() tc qdisc del dev $swp2 root } +if type -t sch_tbf_pre_hook >/dev/null; then + sch_tbf_pre_hook +fi + trap cleanup EXIT setup_prepare diff --git a/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh b/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh new file mode 100755 index 000000000000..5ac184d51809 --- /dev/null +++ b/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh @@ -0,0 +1,161 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +ALL_TESTS="tunnel_key_nofrag_test" + +NUM_NETIFS=4 +source tc_common.sh +source lib.sh + +tcflags="skip_hw" + +h1_create() +{ + simple_if_init $h1 192.0.2.1/24 + forwarding_enable + mtu_set $h1 1500 + tunnel_create h1-et vxlan 192.0.2.1 192.0.2.2 dev $h1 dstport 0 external + tc qdisc add dev h1-et clsact + mtu_set h1-et 1230 + mtu_restore $h1 + mtu_set $h1 1000 +} + +h1_destroy() +{ + tc qdisc del dev h1-et clsact + tunnel_destroy h1-et + forwarding_restore + mtu_restore $h1 + simple_if_fini $h1 192.0.2.1/24 +} + +h2_create() +{ + simple_if_init $h2 192.0.2.2/24 +} + +h2_destroy() +{ + simple_if_fini $h2 192.0.2.2/24 +} + +switch_create() +{ + simple_if_init $swp1 192.0.2.2/24 + tc qdisc add dev $swp1 clsact + simple_if_init $swp2 192.0.2.1/24 +} + +switch_destroy() +{ + simple_if_fini $swp2 192.0.2.1/24 + tc qdisc del dev $swp1 clsact + simple_if_fini $swp1 192.0.2.2/24 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + h1mac=$(mac_get $h1) + h2mac=$(mac_get $h2) + + swp1origmac=$(mac_get $swp1) + swp2origmac=$(mac_get $swp2) + ip link set $swp1 address $h2mac + ip link set $swp2 address $h1mac + + vrf_prepare + + h1_create + h2_create + switch_create + + if ! tc action add action tunnel_key help 2>&1 | grep -q nofrag; then + log_test "SKIP: iproute doesn't support nofrag" + exit $ksft_skip + fi +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup + + ip link set $swp2 address $swp2origmac + ip link set $swp1 address $swp1origmac +} + +tunnel_key_nofrag_test() +{ + RET=0 + local i + + tc filter add dev $swp1 ingress protocol ip pref 100 handle 100 \ + flower ip_flags nofrag action drop + tc filter add dev $swp1 ingress protocol ip pref 101 handle 101 \ + flower ip_flags firstfrag action drop + tc filter add dev $swp1 ingress protocol ip pref 102 handle 102 \ + flower ip_flags nofirstfrag action drop + + # test 'nofrag' set + tc filter add dev h1-et egress protocol all pref 1 handle 1 matchall $tcflags \ + action tunnel_key set src_ip 192.0.2.1 dst_ip 192.0.2.2 id 42 nofrag index 10 + $MZ h1-et -c 1 -p 930 -a 00:aa:bb:cc:dd:ee -b 00:ee:dd:cc:bb:aa -t ip -q + tc_check_packets "dev $swp1 ingress" 100 1 + check_err $? "packet smaller than MTU was not tunneled" + + $MZ h1-et -c 1 -p 931 -a 00:aa:bb:cc:dd:ee -b 00:ee:dd:cc:bb:aa -t ip -q + tc_check_packets "dev $swp1 ingress" 100 1 + check_err $? "packet bigger than MTU matched nofrag (nofrag was set)" + tc_check_packets "dev $swp1 ingress" 101 0 + check_err $? "packet bigger than MTU matched firstfrag (nofrag was set)" + tc_check_packets "dev $swp1 ingress" 102 0 + check_err $? "packet bigger than MTU matched nofirstfrag (nofrag was set)" + + # test 'nofrag' cleared + tc actions change action tunnel_key set src_ip 192.0.2.1 dst_ip 192.0.2.2 id 42 index 10 + $MZ h1-et -c 1 -p 931 -a 00:aa:bb:cc:dd:ee -b 00:ee:dd:cc:bb:aa -t ip -q + tc_check_packets "dev $swp1 ingress" 100 1 + check_err $? "packet bigger than MTU matched nofrag (nofrag was unset)" + tc_check_packets "dev $swp1 ingress" 101 1 + check_err $? "packet bigger than MTU didn't match firstfrag (nofrag was unset) " + tc_check_packets "dev $swp1 ingress" 102 1 + check_err $? "packet bigger than MTU didn't match nofirstfrag (nofrag was unset) " + + for i in 100 101 102; do + tc filter del dev $swp1 ingress protocol ip pref $i handle $i flower + done + tc filter del dev h1-et egress pref 1 handle 1 matchall + + log_test "tunnel_key nofrag ($tcflags)" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +tc_offload_check +if [[ $? -ne 0 ]]; then + log_info "Could not test offloaded functionality" +else + tcflags="skip_sw" + tests_run +fi + +exit $EXIT_STATUS |