diff options
Diffstat (limited to 'tools/testing/selftests/drivers/net')
32 files changed, 3561 insertions, 33 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh index f5abb1ebd392..4029833f7e27 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh @@ -52,6 +52,7 @@ ALL_TESTS=" blackhole_route_test irif_disabled_test erif_disabled_test + blackhole_nexthop_test " NUM_NETIFS=4 @@ -647,6 +648,41 @@ erif_disabled_test() devlink_trap_action_set $trap_name "drop" } +__blackhole_nexthop_test() +{ + local flags=$1; shift + local subnet=$1; shift + local proto=$1; shift + local dip=$1; shift + local trap_name="blackhole_nexthop" + local mz_pid + + RET=0 + + ip -$flags nexthop add id 1 blackhole + ip -$flags route add $subnet nhid 1 + tc filter add dev $rp2 egress protocol $proto pref 1 handle 101 \ + flower skip_hw dst_ip $dip ip_proto udp action drop + + # Generate packets to the blackhole nexthop + $MZ $h1 -$flags -t udp "sp=54321,dp=12345" -c 0 -p 100 -b $rp1mac \ + -B $dip -d 1msec -q & + mz_pid=$! + + devlink_trap_drop_test $trap_name $rp2 101 + log_test "Blackhole nexthop: IPv$flags" + + devlink_trap_drop_cleanup $mz_pid $rp2 $proto 1 101 + ip -$flags route del $subnet + ip -$flags nexthop del id 1 +} + +blackhole_nexthop_test() +{ + __blackhole_nexthop_test "4" "198.51.100.0/30" "ip" $h2_ipv4 + __blackhole_nexthop_test "6" "2001:db8:2::/120" "ipv6" $h2_ipv6 +} + trap cleanup EXIT setup_prepare diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh index 47edf099a17e..508a702f0021 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_policer.sh @@ -207,7 +207,7 @@ __rate_test() RET=0 - devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 16 + devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 512 devlink trap group set $DEVLINK_DEV group l3_drops policer $id # Send packets at highest possible rate and make sure they are dropped @@ -220,8 +220,8 @@ __rate_test() rate=$(trap_rate_get) pct=$((100 * (rate - 1000) / 1000)) - ((-5 <= pct && pct <= 5)) - check_err $? "Expected rate 1000 pps, got $rate pps, which is $pct% off. Required accuracy is +-5%" + ((-10 <= pct && pct <= 10)) + check_err $? "Expected rate 1000 pps, got $rate pps, which is $pct% off. Required accuracy is +-10%" log_info "Expected rate 1000 pps, measured rate $rate pps" drop_rate=$(policer_drop_rate_get $id) @@ -288,35 +288,12 @@ __burst_test() RET=0 - devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 32 + devlink trap policer set $DEVLINK_DEV policer $id rate 1000 burst 512 devlink trap group set $DEVLINK_DEV group l3_drops policer $id - # Send a burst of 64 packets and make sure that about 32 are received - # and the rest are dropped by the policer - log_info "=== Tx burst size: 64, Policer burst size: 32 pps ===" - - t0_rx=$(devlink_trap_rx_packets_get blackhole_route) - t0_drop=$(devlink_trap_policer_rx_dropped_get $id) - - start_traffic $h1 192.0.2.1 198.51.100.100 $rp1_mac -c 64 - - t1_rx=$(devlink_trap_rx_packets_get blackhole_route) - t1_drop=$(devlink_trap_policer_rx_dropped_get $id) - - rx=$((t1_rx - t0_rx)) - pct=$((100 * (rx - 32) / 32)) - ((-20 <= pct && pct <= 20)) - check_err $? "Expected burst size of 32 packets, got $rx packets, which is $pct% off. Required accuracy is +-20%" - log_info "Expected burst size of 32 packets, measured burst size of $rx packets" - - drop=$((t1_drop - t0_drop)) - (( drop > 0 )) - check_err $? "Expected non-zero policer drops, got 0" - log_info "Measured policer drops of $drop packets" - # Send a burst of 16 packets and make sure that 16 are received # and that none are dropped by the policer - log_info "=== Tx burst size: 16, Policer burst size: 32 pps ===" + log_info "=== Tx burst size: 16, Policer burst size: 512 ===" t0_rx=$(devlink_trap_rx_packets_get blackhole_route) t0_drop=$(devlink_trap_policer_rx_dropped_get $id) diff --git a/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh b/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh new file mode 100755 index 000000000000..91891b9418d7 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/ethtool_lanes.sh @@ -0,0 +1,187 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + autoneg + autoneg_force_mode +" + +NUM_NETIFS=2 +: ${TIMEOUT:=30000} # ms +source $lib_dir/lib.sh +source $lib_dir/ethtool_lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up + + busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 + check_err $? "ports did not come up" + + local lanes_exist=$(ethtool $swp1 | grep 'Lanes:') + if [[ -z $lanes_exist ]]; then + log_test "SKIP: driver does not support lanes setting" + exit 1 + fi + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +check_lanes() +{ + local dev=$1; shift + local lanes=$1; shift + local max_speed=$1; shift + local chosen_lanes + + chosen_lanes=$(ethtool $dev | grep 'Lanes:') + chosen_lanes=${chosen_lanes#*"Lanes: "} + + ((chosen_lanes == lanes)) + check_err $? "swp1 advertise $max_speed and $lanes, devs sync to $chosen_lanes" +} + +check_unsupported_lanes() +{ + local dev=$1; shift + local max_speed=$1; shift + local max_lanes=$1; shift + local autoneg=$1; shift + local autoneg_str="" + + local unsupported_lanes=$((max_lanes *= 2)) + + if [[ $autoneg -eq 0 ]]; then + autoneg_str="autoneg off" + fi + + ethtool -s $swp1 speed $max_speed lanes $unsupported_lanes $autoneg_str &> /dev/null + check_fail $? "Unsuccessful $unsupported_lanes lanes setting was expected" +} + +max_speed_and_lanes_get() +{ + local dev=$1; shift + local arr=("$@") + local max_lanes + local max_speed + local -a lanes_arr + local -a speeds_arr + local -a max_values + + for ((i=0; i<${#arr[@]}; i+=2)); do + speeds_arr+=("${arr[$i]}") + lanes_arr+=("${arr[i+1]}") + done + + max_values+=($(get_max "${speeds_arr[@]}")) + max_values+=($(get_max "${lanes_arr[@]}")) + + echo ${max_values[@]} +} + +search_linkmode() +{ + local speed=$1; shift + local lanes=$1; shift + local arr=("$@") + + for ((i=0; i<${#arr[@]}; i+=2)); do + if [[ $speed -eq ${arr[$i]} && $lanes -eq ${arr[i+1]} ]]; then + return 1 + fi + done + return 0 +} + +autoneg() +{ + RET=0 + + local lanes + local max_speed + local max_lanes + + local -a linkmodes_params=($(dev_linkmodes_params_get $swp1 1)) + local -a max_values=($(max_speed_and_lanes_get $swp1 "${linkmodes_params[@]}")) + max_speed=${max_values[0]} + max_lanes=${max_values[1]} + + lanes=$max_lanes + + while [[ $lanes -ge 1 ]]; do + search_linkmode $max_speed $lanes "${linkmodes_params[@]}" + if [[ $? -eq 1 ]]; then + ethtool_set $swp1 speed $max_speed lanes $lanes + ip link set dev $swp1 up + ip link set dev $swp2 up + busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 + check_err $? "ports did not come up" + + check_lanes $swp1 $lanes $max_speed + log_test "$lanes lanes is autonegotiated" + fi + let $((lanes /= 2)) + done + + check_unsupported_lanes $swp1 $max_speed $max_lanes 1 + log_test "Lanes number larger than max width is not set" + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +autoneg_force_mode() +{ + RET=0 + + local lanes + local max_speed + local max_lanes + + local -a linkmodes_params=($(dev_linkmodes_params_get $swp1 1)) + local -a max_values=($(max_speed_and_lanes_get $swp1 "${linkmodes_params[@]}")) + max_speed=${max_values[0]} + max_lanes=${max_values[1]} + + lanes=$max_lanes + + while [[ $lanes -ge 1 ]]; do + search_linkmode $max_speed $lanes "${linkmodes_params[@]}" + if [[ $? -eq 1 ]]; then + ethtool_set $swp1 speed $max_speed lanes $lanes autoneg off + ethtool_set $swp2 speed $max_speed lanes $lanes autoneg off + ip link set dev $swp1 up + ip link set dev $swp2 up + busywait "$TIMEOUT" wait_for_port_up ethtool $swp2 + check_err $? "ports did not come up" + + check_lanes $swp1 $lanes $max_speed + log_test "Autoneg off, $lanes lanes detected during force mode" + fi + let $((lanes /= 2)) + done + + check_unsupported_lanes $swp1 $max_speed $max_lanes 0 + log_test "Lanes number larger than max width is not set" + + ip link set dev $swp2 down + ip link set dev $swp1 down + + ethtool -s $swp2 autoneg on + ethtool -s $swp1 autoneg on +} + +check_ethtool_lanes_support +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/fib.sh b/tools/testing/selftests/drivers/net/mlxsw/fib.sh index eab79b9e58cd..dcbf32b99bb6 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/fib.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/fib.sh @@ -225,6 +225,16 @@ ipv6_local_replace() ip -n $ns link del dev dummy1 } +fib_notify_on_flag_change_set() +{ + local notify=$1; shift + + ip netns exec testns1 sysctl -qw net.ipv4.fib_notify_on_flag_change=$notify + ip netns exec testns1 sysctl -qw net.ipv6.fib_notify_on_flag_change=$notify + + log_info "Set fib_notify_on_flag_change to $notify" +} + setup_prepare() { ip netns add testns1 @@ -251,6 +261,10 @@ trap cleanup EXIT setup_prepare +fib_notify_on_flag_change_set 1 +tests_run + +fib_notify_on_flag_change_set 0 tests_run exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh new file mode 100644 index 000000000000..f813ffefc07e --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh @@ -0,0 +1,64 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for physical ports resource. The test splits each splittable port +# to its width and checks that eventually the number of physical ports equals +# the maximum number of physical ports. + +PORT_NUM_NETIFS=0 + +port_setup_prepare() +{ + : +} + +port_cleanup() +{ + pre_cleanup + + for port in "${unsplit[@]}"; do + devlink port unsplit $port + check_err $? "Did not unsplit $netdev" + done +} + +split_all_ports() +{ + local should_fail=$1; shift + local -a unsplit + + # Loop over the splittable netdevs and create tuples of netdev along + # with its width. For example: + # '$netdev1 $count1 $netdev2 $count2...', when: + # $netdev1-2 are splittable netdevs in the device, and + # $count1-2 are the netdevs width respectively. + while read netdev count <<<$( + devlink -j port show | + jq -r '.[][] | select(.splittable==true) | "\(.netdev) \(.lanes)"' + ) + [[ ! -z $netdev ]] + do + devlink port split $netdev count $count + check_err $? "Did not split $netdev into $count" + unsplit+=( "${netdev}s0" ) + done +} + +port_test() +{ + local max_ports=$1; shift + local should_fail=$1; shift + + split_all_ports $should_fail + + occ=$(devlink -j resource show $DEVLINK_DEV \ + | jq '.[][][] | select(.name=="physical_ports") |.["occ"]') + + [[ $occ -eq $max_ports ]] + if [[ $should_fail -eq 0 ]]; then + check_err $? "Mismatch ports number: Expected $max_ports, got $occ." + else + check_err_fail $should_fail $? "Reached more ports than expected" + fi + +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh b/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh new file mode 100755 index 000000000000..7edaed8eb86a --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/q_in_q_veto.sh @@ -0,0 +1,296 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + create_8021ad_vlan_upper_on_top_front_panel_port + create_8021ad_vlan_upper_on_top_bridge_port + create_8021ad_vlan_upper_on_top_lag + create_8021ad_vlan_upper_on_top_bridge + create_8021ad_vlan_upper_on_top_8021ad_bridge + create_vlan_upper_on_top_8021ad_bridge + create_vlan_upper_on_top_front_panel_enslaved_to_8021ad_bridge + create_vlan_upper_on_top_lag_enslaved_to_8021ad_bridge + enslave_front_panel_with_vlan_upper_to_8021ad_bridge + enslave_lag_with_vlan_upper_to_8021ad_bridge + add_ip_address_to_8021ad_bridge + switch_bridge_protocol_from_8021q_to_8021ad +" +NUM_NETIFS=2 +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up + + sleep 10 +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +create_vlan_upper_on_top_of_bridge() +{ + RET=0 + + local bridge_proto=$1; shift + local netdev_proto=$1; shift + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol $bridge_proto vlan_default_pvid 0 mcast_snooping 0 + + ip link set dev br0 up + ip link set dev $swp1 master br0 + + ip link add name br0.100 link br0 type vlan \ + protocol $netdev_proto id 100 2>/dev/null + check_fail $? "$netdev_proto vlan upper creation on top of an $bridge_proto bridge not rejected" + + ip link add name br0.100 link br0 type vlan \ + protocol $netdev_proto id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "$netdev_proto vlan upper creation on top of an $bridge_proto bridge rejected without extack" + + log_test "create $netdev_proto vlan upper on top $bridge_proto bridge" + + ip link del dev br0 +} + +create_8021ad_vlan_upper_on_top_front_panel_port() +{ + RET=0 + + ip link add name $swp1.100 link $swp1 type vlan \ + protocol 802.1ad id 100 2>/dev/null + check_fail $? "802.1ad vlan upper creation on top of a front panel not rejected" + + ip link add name $swp1.100 link $swp1 type vlan \ + protocol 802.1ad id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1ad vlan upper creation on top of a front panel rejected without extack" + + log_test "create 802.1ad vlan upper on top of a front panel" +} + +create_8021ad_vlan_upper_on_top_bridge_port() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_default_pvid 0 mcast_snooping 0 + + ip link set dev $swp1 master br0 + ip link set dev br0 up + + ip link add name $swp1.100 link $swp1 type vlan \ + protocol 802.1ad id 100 2>/dev/null + check_fail $? "802.1ad vlan upper creation on top of a bridge port not rejected" + + ip link add name $swp1.100 link $swp1 type vlan \ + protocol 802.1ad id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1ad vlan upper creation on top of a bridge port rejected without extack" + + log_test "create 802.1ad vlan upper on top of a bridge port" + + ip link del dev br0 +} + +create_8021ad_vlan_upper_on_top_lag() +{ + RET=0 + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp1 master bond1 + + ip link add name bond1.100 link bond1 type vlan \ + protocol 802.1ad id 100 2>/dev/null + check_fail $? "802.1ad vlan upper creation on top of a lag not rejected" + + ip link add name bond1.100 link bond1 type vlan \ + protocol 802.1ad id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1ad vlan upper creation on top of a lag rejected without extack" + + log_test "create 802.1ad vlan upper on top of a lag" + + ip link del dev bond1 +} + +create_8021ad_vlan_upper_on_top_bridge() +{ + RET=0 + + create_vlan_upper_on_top_of_bridge "802.1q" "802.1ad" +} + +create_8021ad_vlan_upper_on_top_8021ad_bridge() +{ + RET=0 + + create_vlan_upper_on_top_of_bridge "802.1ad" "802.1ad" +} + +create_vlan_upper_on_top_8021ad_bridge() +{ + RET=0 + + create_vlan_upper_on_top_of_bridge "802.1ad" "802.1q" +} + +create_vlan_upper_on_top_front_panel_enslaved_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 up + + ip link set dev $swp1 master br0 + + ip link add name $swp1.100 link $swp1 type vlan id 100 2>/dev/null + check_fail $? "vlan upper creation on top of front panel enslaved to 802.1ad bridge not rejected" + + ip link add name $swp1.100 link $swp1 type vlan id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "vlan upper creation on top of front panel enslaved to 802.1ad bridge rejected without extack" + + log_test "create vlan upper on top of front panel enslaved to 802.1ad bridge" + + ip link del dev br0 +} + +create_vlan_upper_on_top_lag_enslaved_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 up + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp1 master bond1 + ip link set dev bond1 master br0 + + ip link add name bond1.100 link bond1 type vlan id 100 2>/dev/null + check_fail $? "vlan upper creation on top of lag enslaved to 802.1ad bridge not rejected" + + ip link add name bond1.100 link bond1 type vlan id 100 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "vlan upper creation on top of lag enslaved to 802.1ad bridge rejected without extack" + + log_test "create vlan upper on top of lag enslaved to 802.1ad bridge" + + ip link del dev bond1 + ip link del dev br0 +} + +enslave_front_panel_with_vlan_upper_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 up + + ip link add name $swp1.100 link $swp1 type vlan id 100 + + ip link set dev $swp1 master br0 2>/dev/null + check_fail $? "front panel with vlan upper enslavemnt to 802.1ad bridge not rejected" + + ip link set dev $swp1 master br0 2>&1 >/dev/null | grep -q mlxsw_spectrum + check_err $? "front panel with vlan upper enslavemnt to 802.1ad bridge rejected without extack" + + log_test "enslave front panel with vlan upper to 802.1ad bridge" + + ip link del dev $swp1.100 + ip link del dev br0 +} + +enslave_lag_with_vlan_upper_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 up + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp1 master bond1 + ip link add name bond1.100 link bond1 type vlan id 100 + + ip link set dev bond1 master br0 2>/dev/null + check_fail $? "lag with vlan upper enslavemnt to 802.1ad bridge not rejected" + + ip link set dev bond1 master br0 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "lag with vlan upper enslavemnt to 802.1ad bridge rejected without extack" + + log_test "enslave lag with vlan upper to 802.1ad bridge" + + ip link del dev bond1 + ip link del dev br0 +} + + +add_ip_address_to_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + + ip link set dev br0 up + ip link set dev $swp1 master br0 + + ip addr add dev br0 192.0.2.17/28 2>/dev/null + check_fail $? "IP address addition to 802.1ad bridge not rejected" + + ip addr add dev br0 192.0.2.17/28 2>&1 >/dev/null | grep -q mlxsw_spectrum + check_err $? "IP address addition to 802.1ad bridge rejected without extack" + + log_test "IP address addition to 802.1ad bridge" + + ip link del dev br0 +} + +switch_bridge_protocol_from_8021q_to_8021ad() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 \ + vlan_protocol 802.1ad vlan_default_pvid 0 mcast_snooping 0 + + ip link set dev br0 up + ip link set dev $swp1 master br0 + + ip link set dev br0 type bridge vlan_protocol 802.1q 2>/dev/null + check_fail $? "switching bridge protocol from 802.1q to 802.1ad not rejected" + + log_test "switch bridge protocol" + + ip link del dev br0 +} + + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh index 6d1790b5de7a..e9f8718af979 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_ets_strict.sh @@ -147,17 +147,26 @@ switch_create() # Make sure that ingress quotas are smaller than egress so that there is # room for both streams of traffic to be admitted to shared buffer. + devlink_pool_size_thtype_save 0 devlink_pool_size_thtype_set 0 dynamic 10000000 + devlink_pool_size_thtype_save 4 devlink_pool_size_thtype_set 4 dynamic 10000000 + devlink_port_pool_th_save $swp1 0 devlink_port_pool_th_set $swp1 0 6 + devlink_tc_bind_pool_th_save $swp1 1 ingress devlink_tc_bind_pool_th_set $swp1 1 ingress 0 6 + devlink_port_pool_th_save $swp2 0 devlink_port_pool_th_set $swp2 0 6 + devlink_tc_bind_pool_th_save $swp2 2 ingress devlink_tc_bind_pool_th_set $swp2 2 ingress 0 6 + devlink_tc_bind_pool_th_save $swp3 1 egress devlink_tc_bind_pool_th_set $swp3 1 egress 4 7 + devlink_tc_bind_pool_th_save $swp3 2 egress devlink_tc_bind_pool_th_set $swp3 2 egress 4 7 + devlink_port_pool_th_save $swp3 4 devlink_port_pool_th_set $swp3 4 7 } diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_headroom.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_headroom.sh new file mode 100755 index 000000000000..27de3d9ed08e --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_headroom.sh @@ -0,0 +1,379 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +ALL_TESTS=" + test_defaults + test_dcb_ets + test_mtu + test_pfc + test_int_buf + test_tc_priomap + test_tc_mtu + test_tc_sizes + test_tc_int_buf +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=0 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source qos_lib.sh + +swp=$NETIF_NO_CABLE + +cleanup() +{ + pre_cleanup +} + +get_prio_pg() +{ + __mlnx_qos -i $swp | sed -n '/^PFC/,/^[^[:space:]]/p' | + grep buffer | sed 's/ \+/ /g' | cut -d' ' -f 2- +} + +get_prio_pfc() +{ + __mlnx_qos -i $swp | sed -n '/^PFC/,/^[^[:space:]]/p' | + grep enabled | sed 's/ \+/ /g' | cut -d' ' -f 2- +} + +get_prio_tc() +{ + __mlnx_qos -i $swp | sed -n '/^tc/,$p' | + awk '/^tc/ { TC = $2 } + /priority:/ { PRIO[$2]=TC } + END { + for (i in PRIO) + printf("%d ", PRIO[i]) + }' +} + +get_buf_size() +{ + local idx=$1; shift + + __mlnx_qos -i $swp | grep Receive | sed 's/.*: //' | cut -d, -f $((idx + 1)) +} + +get_tot_size() +{ + __mlnx_qos -i $swp | grep Receive | sed 's/.*total_size=//' +} + +check_prio_pg() +{ + local expect=$1; shift + + local current=$(get_prio_pg) + test "$current" = "$expect" + check_err $? "prio2buffer is '$current', expected '$expect'" +} + +check_prio_pfc() +{ + local expect=$1; shift + + local current=$(get_prio_pfc) + test "$current" = "$expect" + check_err $? "prio PFC is '$current', expected '$expect'" +} + +check_prio_tc() +{ + local expect=$1; shift + + local current=$(get_prio_tc) + test "$current" = "$expect" + check_err $? "prio_tc is '$current', expected '$expect'" +} + +__check_buf_size() +{ + local idx=$1; shift + local expr=$1; shift + local what=$1; shift + + local current=$(get_buf_size $idx) + ((current $expr)) + check_err $? "${what}buffer $idx size is '$current', expected '$expr'" + echo $current +} + +check_buf_size() +{ + __check_buf_size "$@" > /dev/null +} + +test_defaults() +{ + RET=0 + + check_prio_pg "0 0 0 0 0 0 0 0 " + check_prio_tc "0 0 0 0 0 0 0 0 " + check_prio_pfc "0 0 0 0 0 0 0 0 " + + log_test "Default headroom configuration" +} + +test_dcb_ets() +{ + RET=0 + + __mlnx_qos -i $swp --prio_tc=0,2,4,6,1,3,5,7 > /dev/null + + check_prio_pg "0 2 4 6 1 3 5 7 " + check_prio_tc "0 2 4 6 1 3 5 7 " + check_prio_pfc "0 0 0 0 0 0 0 0 " + + __mlnx_qos -i $swp --prio_tc=0,0,0,0,0,0,0,0 > /dev/null + + check_prio_pg "0 0 0 0 0 0 0 0 " + check_prio_tc "0 0 0 0 0 0 0 0 " + + __mlnx_qos -i $swp --prio2buffer=1,3,5,7,0,2,4,6 &> /dev/null + check_fail $? "prio2buffer accepted in DCB mode" + + log_test "Configuring headroom through ETS" +} + +test_mtu() +{ + local what=$1; shift + local buf0size_2 + local buf0size + + RET=0 + buf0size=$(__check_buf_size 0 "> 0") + + mtu_set $swp 3000 + buf0size_2=$(__check_buf_size 0 "> $buf0size" "MTU 3000: ") + mtu_restore $swp + + mtu_set $swp 6000 + check_buf_size 0 "> $buf0size_2" "MTU 6000: " + mtu_restore $swp + + check_buf_size 0 "== $buf0size" + + log_test "${what}MTU impacts buffer size" +} + +test_tc_mtu() +{ + # In TC mode, MTU still impacts the threshold below which a buffer is + # not permitted to go. + + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + test_mtu "TC: " + tc qdisc delete dev $swp root +} + +test_pfc() +{ + RET=0 + + __mlnx_qos -i $swp --prio_tc=0,0,0,0,0,1,2,3 > /dev/null + + local buf0size=$(get_buf_size 0) + local buf1size=$(get_buf_size 1) + local buf2size=$(get_buf_size 2) + local buf3size=$(get_buf_size 3) + check_buf_size 0 "> 0" + check_buf_size 1 "> 0" + check_buf_size 2 "> 0" + check_buf_size 3 "> 0" + check_buf_size 4 "== 0" + check_buf_size 5 "== 0" + check_buf_size 6 "== 0" + check_buf_size 7 "== 0" + + log_test "Buffer size sans PFC" + + RET=0 + + __mlnx_qos -i $swp --pfc=0,0,0,0,0,1,1,1 --cable_len=0 > /dev/null + + check_prio_pg "0 0 0 0 0 1 2 3 " + check_prio_pfc "0 0 0 0 0 1 1 1 " + check_buf_size 0 "== $buf0size" + check_buf_size 1 "> $buf1size" + check_buf_size 2 "> $buf2size" + check_buf_size 3 "> $buf3size" + + local buf1size=$(get_buf_size 1) + check_buf_size 2 "== $buf1size" + check_buf_size 3 "== $buf1size" + + log_test "PFC: Cable length 0" + + RET=0 + + __mlnx_qos -i $swp --pfc=0,0,0,0,0,1,1,1 --cable_len=1000 > /dev/null + + check_buf_size 0 "== $buf0size" + check_buf_size 1 "> $buf1size" + check_buf_size 2 "> $buf1size" + check_buf_size 3 "> $buf1size" + + log_test "PFC: Cable length 1000" + + RET=0 + + __mlnx_qos -i $swp --pfc=0,0,0,0,0,0,0,0 --cable_len=0 > /dev/null + __mlnx_qos -i $swp --prio_tc=0,0,0,0,0,0,0,0 > /dev/null + + check_prio_pg "0 0 0 0 0 0 0 0 " + check_prio_tc "0 0 0 0 0 0 0 0 " + check_buf_size 0 "> 0" + check_buf_size 1 "== 0" + check_buf_size 2 "== 0" + check_buf_size 3 "== 0" + check_buf_size 4 "== 0" + check_buf_size 5 "== 0" + check_buf_size 6 "== 0" + check_buf_size 7 "== 0" + + log_test "PFC: Restore defaults" +} + +test_tc_priomap() +{ + RET=0 + + __mlnx_qos -i $swp --prio_tc=0,1,2,3,4,5,6,7 > /dev/null + check_prio_pg "0 1 2 3 4 5 6 7 " + + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + check_prio_pg "0 0 0 0 0 0 0 0 " + + __mlnx_qos -i $swp --prio2buffer=1,3,5,7,0,2,4,6 > /dev/null + check_prio_pg "1 3 5 7 0 2 4 6 " + + tc qdisc delete dev $swp root + check_prio_pg "0 1 2 3 4 5 6 7 " + + # Clean up. + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + __mlnx_qos -i $swp --prio2buffer=0,0,0,0,0,0,0,0 > /dev/null + tc qdisc delete dev $swp root + __mlnx_qos -i $swp --prio_tc=0,0,0,0,0,0,0,0 > /dev/null + + log_test "TC: priomap" +} + +test_tc_sizes() +{ + local cell_size=$(devlink_cell_size_get) + local size=$((cell_size * 1000)) + + RET=0 + + __mlnx_qos -i $swp --buffer_size=$size,0,0,0,0,0,0,0 &> /dev/null + check_fail $? "buffer_size should fail before qdisc is added" + + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + + __mlnx_qos -i $swp --buffer_size=$size,0,0,0,0,0,0,0 > /dev/null + check_err $? "buffer_size should pass after qdisc is added" + check_buf_size 0 "== $size" "set size: " + + mtu_set $swp 6000 + check_buf_size 0 "== $size" "set MTU: " + mtu_restore $swp + + __mlnx_qos -i $swp --buffer_size=0,0,0,0,0,0,0,0 > /dev/null + + # After replacing the qdisc for the same kind, buffer_size still has to + # work. + tc qdisc replace dev $swp root handle 1: bfifo limit 1M + + __mlnx_qos -i $swp --buffer_size=$size,0,0,0,0,0,0,0 > /dev/null + check_buf_size 0 "== $size" "post replace, set size: " + + __mlnx_qos -i $swp --buffer_size=0,0,0,0,0,0,0,0 > /dev/null + + # Likewise after replacing for a different kind. + tc qdisc replace dev $swp root handle 2: prio bands 8 + + __mlnx_qos -i $swp --buffer_size=$size,0,0,0,0,0,0,0 > /dev/null + check_buf_size 0 "== $size" "post replace different kind, set size: " + + tc qdisc delete dev $swp root + + __mlnx_qos -i $swp --buffer_size=$size,0,0,0,0,0,0,0 &> /dev/null + check_fail $? "buffer_size should fail after qdisc is deleted" + + log_test "TC: buffer size" +} + +test_int_buf() +{ + local what=$1; shift + + RET=0 + + local buf0size=$(get_buf_size 0) + local tot_size=$(get_tot_size) + + # Size of internal buffer and buffer 9. + local dsize=$((tot_size - buf0size)) + + tc qdisc add dev $swp clsact + tc filter add dev $swp egress matchall skip_sw action mirred egress mirror dev $swp + + local buf0size_2=$(get_buf_size 0) + local tot_size_2=$(get_tot_size) + local dsize_2=$((tot_size_2 - buf0size_2)) + + # Egress SPAN should have added to the "invisible" buffer configuration. + ((dsize_2 > dsize)) + check_err $? "Invisible buffers account for '$dsize_2', expected '> $dsize'" + + mtu_set $swp 3000 + + local buf0size_3=$(get_buf_size 0) + local tot_size_3=$(get_tot_size) + local dsize_3=$((tot_size_3 - buf0size_3)) + + # MTU change might change buffer 0, which will show at total, but the + # hidden buffers should stay the same size. + ((dsize_3 == dsize_2)) + check_err $? "MTU change: Invisible buffers account for '$dsize_3', expected '== $dsize_2'" + + mtu_restore $swp + tc qdisc del dev $swp clsact + + # After SPAN removal, hidden buffers should be back to the original sizes. + local buf0size_4=$(get_buf_size 0) + local tot_size_4=$(get_tot_size) + local dsize_4=$((tot_size_4 - buf0size_4)) + ((dsize_4 == dsize)) + check_err $? "SPAN removed: Invisible buffers account for '$dsize_4', expected '== $dsize'" + + log_test "${what}internal buffer size" +} + +test_tc_int_buf() +{ + local cell_size=$(devlink_cell_size_get) + local size=$((cell_size * 1000)) + + tc qdisc replace dev $swp root handle 1: bfifo limit 1.5M + test_int_buf "TC: " + + __mlnx_qos -i $swp --buffer_size=$size,0,0,0,0,0,0,0 > /dev/null + test_int_buf "TC+buffsize: " + + __mlnx_qos -i $swp --buffer_size=0,0,0,0,0,0,0,0 > /dev/null + tc qdisc delete dev $swp root +} + +trap cleanup EXIT + +bail_on_lldpad +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh index faa51012cdac..0bf76f13c030 100644 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_lib.sh @@ -82,3 +82,17 @@ bail_on_lldpad() fi fi } + +__mlnx_qos() +{ + local err + + mlnx_qos "$@" 2>/dev/null + err=$? + + if ((err)); then + echo "Error ($err) in mlnx_qos $@" >/dev/stderr + fi + + return $err +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh index b025daea062d..8f164c80e215 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh @@ -145,12 +145,17 @@ switch_create() # Make sure that ingress quotas are smaller than egress so that there is # room for both streams of traffic to be admitted to shared buffer. + devlink_port_pool_th_save $swp1 0 devlink_port_pool_th_set $swp1 0 5 + devlink_tc_bind_pool_th_save $swp1 0 ingress devlink_tc_bind_pool_th_set $swp1 0 ingress 0 5 + devlink_port_pool_th_save $swp2 0 devlink_port_pool_th_set $swp2 0 5 + devlink_tc_bind_pool_th_save $swp2 1 ingress devlink_tc_bind_pool_th_set $swp2 1 ingress 0 5 + devlink_port_pool_th_save $swp3 4 devlink_port_pool_th_set $swp3 4 12 } diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh new file mode 100755 index 000000000000..5c7700212f75 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh @@ -0,0 +1,403 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test injects a 10-MB burst of traffic with VLAN tag and 802.1p priority +# of 1. This stream is consistently prioritized as priority 1, is put to PG +# buffer 1, and scheduled at TC 1. +# +# - the stream first ingresses through $swp1, where it is forwarded to $swp3 +# +# - then it ingresses through $swp4. Here it is put to a lossless buffer and put +# to a small pool ("PFC pool"). The traffic is forwarded to $swp2, which is +# shaped, and thus the PFC pool eventually fills, therefore the headroom +# fills, and $swp3 is paused. +# +# - since $swp3 now can't send traffic, the traffic ingressing $swp1 is kept at +# a pool ("overflow pool"). The overflow pool needs to be large enough to +# contain the whole burst. +# +# - eventually the PFC pool gets some traffic out, headroom therefore gets some +# traffic to the pool, and $swp3 is unpaused again. This way the traffic is +# gradually forwarded from the overflow pool, through the PFC pool, out of +# $swp2, and eventually to $h2. +# +# - if PFC works, all lossless flow packets that ingress through $swp1 should +# also be seen ingressing $h2. If it doesn't, there will be drops due to +# discrepancy between the speeds of $swp1 and $h2. +# +# - it should all play out relatively quickly, so that SLL and HLL will not +# cause drops. +# +# +-----------------------+ +# | H1 | +# | + $h1.111 | +# | | 192.0.2.33/28 | +# | | | +# | + $h1 | +# +---|-------------------+ +--------------------+ +# | | | +# +---|----------------------|--------------------|---------------------------+ +# | + $swp1 $swp3 + + $swp4 | +# | | iPOOL1 iPOOL0 | | iPOOL2 | +# | | ePOOL4 ePOOL5 | | ePOOL4 | +# | | 1Gbps | | 1Gbps | +# | | PFC:enabled=1 | | PFC:enabled=1 | +# | +-|----------------------|-+ +-|------------------------+ | +# | | + $swp1.111 $swp3.111 + | | + $swp4.111 | | +# | | | | | | +# | | BR1 | | BR2 | | +# | | | | | | +# | | | | + $swp2.111 | | +# | +--------------------------+ +---------|----------------+ | +# | | | +# | iPOOL0: 500KB dynamic | | +# | iPOOL1: 10MB static | | +# | iPOOL2: 1MB static + $swp2 | +# | ePOOL4: 500KB dynamic | iPOOL0 | +# | ePOOL5: 10MB static | ePOOL6 | +# | ePOOL6: "infinite" static | 200Mbps shaper | +# +-------------------------------------------------------|-------------------+ +# | +# +---|-------------------+ +# | + $h2 H2 | +# | | | +# | + $h2.111 | +# | 192.0.2.34/28 | +# +-----------------------+ +# +# iPOOL0+ePOOL4 is a helper pool for control traffic etc. +# iPOOL1+ePOOL5 are overflow pools. +# iPOOL2+ePOOL6 are PFC pools. + +ALL_TESTS=" + ping_ipv4 + test_qos_pfc +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=6 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh +source qos_lib.sh + +_1KB=1000 +_100KB=$((100 * _1KB)) +_500KB=$((500 * _1KB)) +_1MB=$((1000 * _1KB)) +_10MB=$((10 * _1MB)) + +h1_create() +{ + simple_if_init $h1 + mtu_set $h1 10000 + + vlan_create $h1 111 v$h1 192.0.2.33/28 +} + +h1_destroy() +{ + vlan_destroy $h1 111 + + mtu_restore $h1 + simple_if_fini $h1 +} + +h2_create() +{ + simple_if_init $h2 + mtu_set $h2 10000 + + vlan_create $h2 111 v$h2 192.0.2.34/28 +} + +h2_destroy() +{ + vlan_destroy $h2 111 + + mtu_restore $h2 + simple_if_fini $h2 +} + +switch_create() +{ + # pools + # ----- + + devlink_pool_size_thtype_save 0 + devlink_pool_size_thtype_save 4 + devlink_pool_size_thtype_save 1 + devlink_pool_size_thtype_save 5 + devlink_pool_size_thtype_save 2 + devlink_pool_size_thtype_save 6 + + devlink_port_pool_th_save $swp1 1 + devlink_port_pool_th_save $swp2 6 + devlink_port_pool_th_save $swp3 5 + devlink_port_pool_th_save $swp4 2 + + devlink_tc_bind_pool_th_save $swp1 1 ingress + devlink_tc_bind_pool_th_save $swp2 1 egress + devlink_tc_bind_pool_th_save $swp3 1 egress + devlink_tc_bind_pool_th_save $swp4 1 ingress + + # Control traffic pools. Just reduce the size. Keep them dynamic so that + # we don't need to change all the uninteresting quotas. + devlink_pool_size_thtype_set 0 dynamic $_500KB + devlink_pool_size_thtype_set 4 dynamic $_500KB + + # Overflow pools. + devlink_pool_size_thtype_set 1 static $_10MB + devlink_pool_size_thtype_set 5 static $_10MB + + # PFC pools. As per the writ, the size of egress PFC pool should be + # infinice, but actually it just needs to be large enough to not matter + # in practice, so reuse the 10MB limit. + devlink_pool_size_thtype_set 2 static $_1MB + devlink_pool_size_thtype_set 6 static $_10MB + + # $swp1 + # ----- + + ip link set dev $swp1 up + mtu_set $swp1 10000 + vlan_create $swp1 111 + ip link set dev $swp1.111 type vlan ingress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp1 1 $_10MB + devlink_tc_bind_pool_th_set $swp1 1 ingress 1 $_10MB + + # Configure qdisc so that we can configure PG and therefore pool + # assignment. + tc qdisc replace dev $swp1 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + __mlnx_qos -i $swp1 --prio2buffer=0,1,0,0,0,0,0,0 >/dev/null + + # $swp2 + # ----- + + ip link set dev $swp2 up + mtu_set $swp2 10000 + vlan_create $swp2 111 + ip link set dev $swp2.111 type vlan egress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp2 6 $_10MB + devlink_tc_bind_pool_th_set $swp2 1 egress 6 $_10MB + + # prio 0->TC0 (band 7), 1->TC1 (band 6). TC1 is shaped. + tc qdisc replace dev $swp2 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + tc qdisc replace dev $swp2 parent 1:7 handle 17: \ + tbf rate 200Mbit burst 131072 limit 1M + + # $swp3 + # ----- + + ip link set dev $swp3 up + mtu_set $swp3 10000 + vlan_create $swp3 111 + ip link set dev $swp3.111 type vlan egress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp3 5 $_10MB + devlink_tc_bind_pool_th_set $swp3 1 egress 5 $_10MB + + # prio 0->TC0 (band 7), 1->TC1 (band 6) + tc qdisc replace dev $swp3 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + + # Need to enable PFC so that PAUSE takes effect. Therefore need to put + # the lossless prio into a buffer of its own. Don't bother with buffer + # sizes though, there is not going to be any pressure in the "backward" + # direction. + __mlnx_qos -i $swp3 --prio2buffer=0,1,0,0,0,0,0,0 >/dev/null + __mlnx_qos -i $swp3 --pfc=0,1,0,0,0,0,0,0 >/dev/null + + # $swp4 + # ----- + + ip link set dev $swp4 up + mtu_set $swp4 10000 + vlan_create $swp4 111 + ip link set dev $swp4.111 type vlan ingress-qos-map 0:0 1:1 + + devlink_port_pool_th_set $swp4 2 $_1MB + devlink_tc_bind_pool_th_set $swp4 1 ingress 2 $_1MB + + # Configure qdisc so that we can hand-tune headroom. + tc qdisc replace dev $swp4 root handle 1: \ + ets bands 8 strict 8 priomap 7 6 + __mlnx_qos -i $swp4 --prio2buffer=0,1,0,0,0,0,0,0 >/dev/null + __mlnx_qos -i $swp4 --pfc=0,1,0,0,0,0,0,0 >/dev/null + # PG0 will get autoconfigured to Xoff, give PG1 arbitrarily 100K, which + # is (-2*MTU) about 80K of delay provision. + __mlnx_qos -i $swp4 --buffer_size=0,$_100KB,0,0,0,0,0,0 >/dev/null + + # bridges + # ------- + + ip link add name br1 type bridge vlan_filtering 0 + ip link set dev $swp1.111 master br1 + ip link set dev $swp3.111 master br1 + ip link set dev br1 up + + ip link add name br2 type bridge vlan_filtering 0 + ip link set dev $swp2.111 master br2 + ip link set dev $swp4.111 master br2 + ip link set dev br2 up +} + +switch_destroy() +{ + # Do this first so that we can reset the limits to values that are only + # valid for the original static / dynamic setting. + devlink_pool_size_thtype_restore 6 + devlink_pool_size_thtype_restore 5 + devlink_pool_size_thtype_restore 4 + devlink_pool_size_thtype_restore 2 + devlink_pool_size_thtype_restore 1 + devlink_pool_size_thtype_restore 0 + + # bridges + # ------- + + ip link set dev br2 down + ip link set dev $swp4.111 nomaster + ip link set dev $swp2.111 nomaster + ip link del dev br2 + + ip link set dev br1 down + ip link set dev $swp3.111 nomaster + ip link set dev $swp1.111 nomaster + ip link del dev br1 + + # $swp4 + # ----- + + __mlnx_qos -i $swp4 --buffer_size=0,0,0,0,0,0,0,0 >/dev/null + __mlnx_qos -i $swp4 --pfc=0,0,0,0,0,0,0,0 >/dev/null + __mlnx_qos -i $swp4 --prio2buffer=0,0,0,0,0,0,0,0 >/dev/null + tc qdisc del dev $swp4 root + + devlink_tc_bind_pool_th_restore $swp4 1 ingress + devlink_port_pool_th_restore $swp4 2 + + vlan_destroy $swp4 111 + mtu_restore $swp4 + ip link set dev $swp4 down + + # $swp3 + # ----- + + __mlnx_qos -i $swp3 --pfc=0,0,0,0,0,0,0,0 >/dev/null + __mlnx_qos -i $swp3 --prio2buffer=0,0,0,0,0,0,0,0 >/dev/null + tc qdisc del dev $swp3 root + + devlink_tc_bind_pool_th_restore $swp3 1 egress + devlink_port_pool_th_restore $swp3 5 + + vlan_destroy $swp3 111 + mtu_restore $swp3 + ip link set dev $swp3 down + + # $swp2 + # ----- + + tc qdisc del dev $swp2 parent 1:7 + tc qdisc del dev $swp2 root + + devlink_tc_bind_pool_th_restore $swp2 1 egress + devlink_port_pool_th_restore $swp2 6 + + vlan_destroy $swp2 111 + mtu_restore $swp2 + ip link set dev $swp2 down + + # $swp1 + # ----- + + __mlnx_qos -i $swp1 --prio2buffer=0,0,0,0,0,0,0,0 >/dev/null + tc qdisc del dev $swp1 root + + devlink_tc_bind_pool_th_restore $swp1 1 ingress + devlink_port_pool_th_restore $swp1 1 + + vlan_destroy $swp1 111 + mtu_restore $swp1 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + swp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + + swp3=${NETIFS[p5]} + swp4=${NETIFS[p6]} + + h2mac=$(mac_get $h2) + + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.34 +} + +test_qos_pfc() +{ + RET=0 + + # 10M pool, each packet is 8K of payload + headers + local pkts=$((_10MB / 8050)) + local size=$((pkts * 8050)) + local in0=$(ethtool_stats_get $swp1 rx_octets_prio_1) + local out0=$(ethtool_stats_get $swp2 tx_octets_prio_1) + + $MZ $h1 -p 8000 -Q 1:111 -A 192.0.2.33 -B 192.0.2.34 \ + -a own -b $h2mac -c $pkts -t udp -q + sleep 2 + + local in1=$(ethtool_stats_get $swp1 rx_octets_prio_1) + local out1=$(ethtool_stats_get $swp2 tx_octets_prio_1) + + local din=$((in1 - in0)) + local dout=$((out1 - out0)) + + local pct_in=$((din * 100 / size)) + + ((pct_in > 95 && pct_in < 105)) + check_err $? "Relative ingress out of expected bounds, $pct_in% should be 100%" + + ((dout == din)) + check_err $? "$((din - dout)) bytes out of $din ingressed got lost" + + log_test "PFC" +} + +trap cleanup EXIT + +bail_on_lldpad +setup_prepare +setup_wait +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh index f4031002d5e9..ed346da5d3cb 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh @@ -22,6 +22,7 @@ ALL_TESTS=" duplicate_vlans_test vlan_rif_refcount_test subport_rif_refcount_test + subport_rif_lag_join_test vlan_dev_deletion_test lag_unlink_slaves_test lag_dev_deletion_test @@ -29,6 +30,11 @@ ALL_TESTS=" bridge_extern_learn_test neigh_offload_test nexthop_offload_test + nexthop_obj_invalid_test + nexthop_obj_offload_test + nexthop_obj_group_offload_test + nexthop_obj_blackhole_offload_test + nexthop_obj_route_offload_test devlink_reload_test " NUM_NETIFS=2 @@ -435,6 +441,48 @@ subport_rif_refcount_test() ip link del dev bond1 } +subport_rif_lag_join_test() +{ + # Test that the reference count of a RIF configured for a LAG is + # incremented / decremented when ports join / leave the LAG. We use the + # offload indication on routes configured on the RIF to understand if + # it was created / destroyed + RET=0 + + ip link add name bond1 type bond mode 802.3ad + ip link set dev $swp1 down + ip link set dev $swp2 down + ip link set dev $swp1 master bond1 + ip link set dev $swp2 master bond1 + + ip link set dev bond1 up + ip -6 address add 2001:db8:1::1/64 dev bond1 + + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif was not created on lag device" + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was destroyed after removing one port" + + ip link set dev $swp1 master bond1 + ip link set dev $swp2 nomaster + busywait "$TIMEOUT" wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was destroyed after re-adding a port and removing another" + + ip link set dev $swp1 nomaster + busywait "$TIMEOUT" not wait_for_offload \ + ip -6 route get fibmatch 2001:db8:1::2 dev bond1 + check_err $? "subport rif of lag device was not destroyed when should" + + log_test "subport rif lag join" + + ip link del dev bond1 +} + vlan_dev_deletion_test() { # Test that VLAN devices are correctly deleted / unlinked when enslaved @@ -674,6 +722,209 @@ nexthop_offload_test() sysctl_restore net.ipv6.conf.$swp2.keep_addr_on_down } +nexthop_obj_invalid_test() +{ + # Test that invalid nexthop object configurations are rejected + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 192.0.2.2/24 2001:db8:1::2/64 + setup_wait + + ip nexthop add id 1 via 192.0.2.3 fdb + check_fail $? "managed to configure an FDB nexthop when should not" + + ip nexthop add id 1 encap mpls 200/300 via 192.0.2.3 dev $swp1 + check_fail $? "managed to configure a nexthop with MPLS encap when should not" + + ip nexthop add id 1 dev $swp1 + ip nexthop add id 2 dev $swp1 + ip nexthop add id 10 group 1/2 + check_fail $? "managed to configure a nexthop group with device-only nexthops when should not" + + log_test "nexthop objects - invalid configurations" + + ip nexthop del id 2 + ip nexthop del id 1 + + simple_if_fini $swp2 192.0.2.2/24 2001:db8:1::2/64 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +nexthop_obj_offload_test() +{ + # Test offload indication of nexthop objects + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 + setup_wait + + ip nexthop add id 1 via 192.0.2.2 dev $swp1 + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud reachable \ + dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop not marked as offloaded when should" + + ip neigh replace 192.0.2.2 nud failed dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop marked as offloaded after setting neigh to failed state" + + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud reachable \ + dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop not marked as offloaded after neigh replace" + + ip nexthop replace id 1 via 192.0.2.3 dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop marked as offloaded after replacing to use an invalid address" + + ip nexthop replace id 1 via 192.0.2.2 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "nexthop not marked as offloaded after replacing to use a valid address" + + log_test "nexthop objects offload indication" + + ip neigh del 192.0.2.2 dev $swp1 + ip nexthop del id 1 + + simple_if_fini $swp2 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +nexthop_obj_group_offload_test() +{ + # Test offload indication of nexthop group objects + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 + setup_wait + + ip nexthop add id 1 via 192.0.2.2 dev $swp1 + ip nexthop add id 2 via 2001:db8:1::2 dev $swp1 + ip nexthop add id 10 group 1/2 + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud reachable \ + dev $swp1 + ip neigh replace 192.0.2.3 lladdr 00:11:22:33:44:55 nud reachable \ + dev $swp1 + ip neigh replace 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud reachable \ + dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "IPv4 nexthop not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 2 + check_err $? "IPv6 nexthop not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 10 + check_err $? "nexthop group not marked as offloaded when should" + + # Invalidate nexthop id 1 + ip neigh replace 192.0.2.2 nud failed dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip nexthop show id 10 + check_fail $? "nexthop group not marked as offloaded with one valid nexthop" + + # Invalidate nexthop id 2 + ip neigh replace 2001:db8:1::2 nud failed dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip nexthop show id 10 + check_err $? "nexthop group marked as offloaded when should not" + + # Revalidate nexthop id 1 + ip nexthop replace id 1 via 192.0.2.3 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 10 + check_err $? "nexthop group not marked as offloaded after revalidating nexthop" + + log_test "nexthop group objects offload indication" + + ip neigh del 2001:db8:1::2 dev $swp1 + ip neigh del 192.0.2.3 dev $swp1 + ip neigh del 192.0.2.2 dev $swp1 + ip nexthop del id 10 + ip nexthop del id 2 + ip nexthop del id 1 + + simple_if_fini $swp2 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + +nexthop_obj_blackhole_offload_test() +{ + # Test offload indication of blackhole nexthop objects + RET=0 + + ip nexthop add id 1 blackhole + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 1 + check_err $? "Blackhole nexthop not marked as offloaded when should" + + ip nexthop add id 10 group 1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop show id 10 + check_err $? "Nexthop group not marked as offloaded when should" + + log_test "blackhole nexthop objects offload indication" + + ip nexthop del id 10 + ip nexthop del id 1 +} + +nexthop_obj_route_offload_test() +{ + # Test offload indication of routes using nexthop objects + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 + setup_wait + + ip nexthop add id 1 via 192.0.2.2 dev $swp1 + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud reachable \ + dev $swp1 + ip neigh replace 192.0.2.3 lladdr 00:11:22:33:44:55 nud reachable \ + dev $swp1 + + ip route replace 198.51.100.0/24 nhid 1 + busywait "$TIMEOUT" wait_for_offload \ + ip route show 198.51.100.0/24 + check_err $? "route not marked as offloaded when using valid nexthop" + + ip nexthop replace id 1 via 192.0.2.3 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip route show 198.51.100.0/24 + check_err $? "route not marked as offloaded after replacing valid nexthop with a valid one" + + ip nexthop replace id 1 via 192.0.2.4 dev $swp1 + busywait "$TIMEOUT" not wait_for_offload \ + ip route show 198.51.100.0/24 + check_err $? "route marked as offloaded after replacing valid nexthop with an invalid one" + + ip nexthop replace id 1 via 192.0.2.2 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip route show 198.51.100.0/24 + check_err $? "route not marked as offloaded after replacing invalid nexthop with a valid one" + + log_test "routes using nexthop objects offload indication" + + ip route del 198.51.100.0/24 + ip neigh del 192.0.2.3 dev $swp1 + ip neigh del 192.0.2.2 dev $swp1 + ip nexthop del id 1 + + simple_if_fini $swp2 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + devlink_reload_test() { # Test that after executing all the above configuration tests, a diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh index 94c37124a840..af64bc9ea8ab 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_ets.sh @@ -27,11 +27,17 @@ switch_create() # amount of traffic that is admitted to the shared buffers. This makes # sure that there is always enough traffic of all types to select from # for the DWRR process. + devlink_port_pool_th_save $swp1 0 devlink_port_pool_th_set $swp1 0 12 + devlink_tc_bind_pool_th_save $swp1 0 ingress devlink_tc_bind_pool_th_set $swp1 0 ingress 0 12 + devlink_port_pool_th_save $swp2 4 devlink_port_pool_th_set $swp2 4 12 + devlink_tc_bind_pool_th_save $swp2 7 egress devlink_tc_bind_pool_th_set $swp2 7 egress 4 5 + devlink_tc_bind_pool_th_save $swp2 6 egress devlink_tc_bind_pool_th_set $swp2 6 egress 4 5 + devlink_tc_bind_pool_th_save $swp2 5 egress devlink_tc_bind_pool_th_set $swp2 5 egress 4 5 # Note: sch_ets_core.sh uses VLAN ingress-qos-map to assign packet diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh index 517297a14ecf..b0cb1aaffdda 100644 --- a/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh @@ -208,6 +208,7 @@ switch_create() ip link set dev br2_11 up local size=$(devlink_pool_size_thtype 0 | cut -d' ' -f 1) + devlink_port_pool_th_save $swp3 8 devlink_port_pool_th_set $swp3 8 $size } diff --git a/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py index 0d4b9327c9b3..2223337eed0c 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py +++ b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py @@ -1,4 +1,4 @@ -#!/usr/bin/python +#!/usr/bin/env python # SPDX-License-Identifier: GPL-2.0 import subprocess diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_scale.sh new file mode 100644 index 000000000000..0b71dfbbb447 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../port_scale.sh + +port_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get physical_ports) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/q_in_vni_veto.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/q_in_vni_veto.sh new file mode 100755 index 000000000000..0231205a7147 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/q_in_vni_veto.sh @@ -0,0 +1,77 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../../net/forwarding + +VXPORT=4789 + +ALL_TESTS=" + create_dot1d_and_dot1ad_vxlans +" +NUM_NETIFS=2 +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +create_dot1d_and_dot1ad_vxlans() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 vlan_protocol 802.1ad \ + vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 up + + ip link add name vx100 type vxlan id 1000 local 192.0.2.17 dstport \ + "$VXPORT" nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx100 up + + ip link set dev $swp1 master br0 + ip link set dev vx100 master br0 + bridge vlan add vid 100 dev vx100 pvid untagged + + ip link add dev br1 type bridge vlan_filtering 0 mcast_snooping 0 + ip link set dev br1 up + + ip link add name vx200 type vxlan id 2000 local 192.0.2.17 dstport \ + "$VXPORT" nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx200 up + + ip link set dev $swp2 master br1 + ip link set dev vx200 master br1 2>/dev/null + check_fail $? "802.1d and 802.1ad VxLANs at the same time not rejected" + + ip link set dev vx200 master br1 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1d and 802.1ad VxLANs at the same time rejected without extack" + + log_test "create 802.1d and 802.1ad VxLANs" + + ip link del dev vx200 + ip link del dev br1 + ip link del dev vx100 + ip link del dev br0 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh index d7cf33a3f18d..4a1c9328555f 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh @@ -28,7 +28,7 @@ cleanup() trap cleanup EXIT -ALL_TESTS="router tc_flower mirror_gre tc_police" +ALL_TESTS="router tc_flower mirror_gre tc_police port" for current_test in ${TESTS:-$ALL_TESTS}; do source ${current_test}_scale.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/port_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/port_scale.sh new file mode 100644 index 000000000000..0b71dfbbb447 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/port_scale.sh @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0 +source ../port_scale.sh + +port_get_target() +{ + local should_fail=$1 + local target + + target=$(devlink_resource_size_get physical_ports) + + if ((! should_fail)); then + echo $target + else + echo $((target + 1)) + fi +} diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/q_in_vni_veto.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/q_in_vni_veto.sh new file mode 100755 index 000000000000..f0443b1b05b9 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/q_in_vni_veto.sh @@ -0,0 +1,66 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../../net/forwarding + +VXPORT=4789 + +ALL_TESTS=" + create_vxlan_on_top_of_8021ad_bridge +" +NUM_NETIFS=2 +source $lib_dir/lib.sh + +setup_prepare() +{ + swp1=${NETIFS[p1]} + swp2=${NETIFS[p2]} + + ip link set dev $swp1 up + ip link set dev $swp2 up +} + +cleanup() +{ + pre_cleanup + + ip link set dev $swp2 down + ip link set dev $swp1 down +} + +create_vxlan_on_top_of_8021ad_bridge() +{ + RET=0 + + ip link add dev br0 type bridge vlan_filtering 1 vlan_protocol 802.1ad \ + vlan_default_pvid 0 mcast_snooping 0 + ip link set dev br0 up + + ip link add name vx100 type vxlan id 1000 local 192.0.2.17 dstport \ + "$VXPORT" nolearning noudpcsum tos inherit ttl 100 + ip link set dev vx100 up + + ip link set dev $swp1 master br0 + ip link set dev vx100 master br0 + + bridge vlan add vid 100 dev vx100 pvid untagged 2>/dev/null + check_fail $? "802.1ad bridge with VxLAN in Spectrum-1 not rejected" + + bridge vlan add vid 100 dev vx100 pvid untagged 2>&1 >/dev/null \ + | grep -q mlxsw_spectrum + check_err $? "802.1ad bridge with VxLAN in Spectrum-1 rejected without extack" + + log_test "create VxLAN on top of 802.1ad bridge" + + ip link del dev vx100 + ip link del dev br0 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh index 43f662401bc3..087a884f66cd 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh @@ -22,7 +22,7 @@ cleanup() devlink_sp_read_kvd_defaults trap cleanup EXIT -ALL_TESTS="router tc_flower mirror_gre tc_police" +ALL_TESTS="router tc_flower mirror_gre tc_police port" for current_test in ${TESTS:-$ALL_TESTS}; do source ${current_test}_scale.sh diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh index 4b96561c462f..3e3e06ea5703 100644 --- a/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh @@ -24,6 +24,13 @@ tc_police_switch_destroy() simple_if_fini $swp1 } +tc_police_addr() +{ + local num=$1; shift + + printf "2001:db8:1::%x" $num +} + tc_police_rules_create() { local count=$1; shift @@ -34,8 +41,9 @@ tc_police_rules_create() for ((i = 0; i < count; ++i)); do cat >> $TC_POLICE_BATCH_FILE <<-EOF filter add dev $swp1 ingress \ - prot ip \ - flower skip_sw \ + prot ipv6 \ + pref 1000 \ + flower skip_sw dst_ip $(tc_police_addr $i) \ action police rate 10mbit burst 100k \ conform-exceed drop/ok EOF diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh index de4b32fc4223..40909c254365 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh @@ -23,6 +23,27 @@ fw_flash_test() devlink dev flash $DL_HANDLE file dummy check_err $? "Failed to flash with status updates on" + devlink dev flash $DL_HANDLE file dummy component fw.mgmt + check_err $? "Failed to flash with component attribute" + + devlink dev flash $DL_HANDLE file dummy overwrite settings + check_fail $? "Flash with overwrite settings should be rejected" + + echo "1"> $DEBUGFS_DIR/fw_update_overwrite_mask + check_err $? "Failed to change allowed overwrite mask" + + devlink dev flash $DL_HANDLE file dummy overwrite settings + check_err $? "Failed to flash with settings overwrite enabled" + + devlink dev flash $DL_HANDLE file dummy overwrite identifiers + check_fail $? "Flash with overwrite settings should be identifiers" + + echo "3"> $DEBUGFS_DIR/fw_update_overwrite_mask + check_err $? "Failed to change allowed overwrite mask" + + devlink dev flash $DL_HANDLE file dummy overwrite identifiers overwrite settings + check_err $? "Failed to flash with settings and identifiers overwrite enabled" + echo "n"> $DEBUGFS_DIR/fw_update_status check_err $? "Failed to disable status updates" diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh new file mode 100755 index 000000000000..9adfba8f87e6 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh @@ -0,0 +1,132 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +function get_value { + local query="${SETTINGS_MAP[$1]}" + + echo $(ethtool -c $NSIM_NETDEV | \ + awk -F':' -v pattern="$query:" '$0 ~ pattern {gsub(/[ \t]/, "", $2); print $2}') +} + +function update_current_settings { + for key in ${!SETTINGS_MAP[@]}; do + CURRENT_SETTINGS[$key]=$(get_value $key) + done + echo ${CURRENT_SETTINGS[@]} +} + +if ! ethtool -h | grep -q coalesce; then + echo "SKIP: No --coalesce support in ethtool" + exit 4 +fi + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +declare -A SETTINGS_MAP=( + ["rx-frames-low"]="rx-frame-low" + ["tx-frames-low"]="tx-frame-low" + ["rx-frames-high"]="rx-frame-high" + ["tx-frames-high"]="tx-frame-high" + ["rx-usecs"]="rx-usecs" + ["rx-frames"]="rx-frames" + ["rx-usecs-irq"]="rx-usecs-irq" + ["rx-frames-irq"]="rx-frames-irq" + ["tx-usecs"]="tx-usecs" + ["tx-frames"]="tx-frames" + ["tx-usecs-irq"]="tx-usecs-irq" + ["tx-frames-irq"]="tx-frames-irq" + ["stats-block-usecs"]="stats-block-usecs" + ["pkt-rate-low"]="pkt-rate-low" + ["rx-usecs-low"]="rx-usecs-low" + ["tx-usecs-low"]="tx-usecs-low" + ["pkt-rate-high"]="pkt-rate-high" + ["rx-usecs-high"]="rx-usecs-high" + ["tx-usecs-high"]="tx-usecs-high" + ["sample-interval"]="sample-interval" +) + +declare -A CURRENT_SETTINGS=( + ["rx-frames-low"]="" + ["tx-frames-low"]="" + ["rx-frames-high"]="" + ["tx-frames-high"]="" + ["rx-usecs"]="" + ["rx-frames"]="" + ["rx-usecs-irq"]="" + ["rx-frames-irq"]="" + ["tx-usecs"]="" + ["tx-frames"]="" + ["tx-usecs-irq"]="" + ["tx-frames-irq"]="" + ["stats-block-usecs"]="" + ["pkt-rate-low"]="" + ["rx-usecs-low"]="" + ["tx-usecs-low"]="" + ["pkt-rate-high"]="" + ["rx-usecs-high"]="" + ["tx-usecs-high"]="" + ["sample-interval"]="" +) + +declare -A EXPECTED_SETTINGS=( + ["rx-frames-low"]="" + ["tx-frames-low"]="" + ["rx-frames-high"]="" + ["tx-frames-high"]="" + ["rx-usecs"]="" + ["rx-frames"]="" + ["rx-usecs-irq"]="" + ["rx-frames-irq"]="" + ["tx-usecs"]="" + ["tx-frames"]="" + ["tx-usecs-irq"]="" + ["tx-frames-irq"]="" + ["stats-block-usecs"]="" + ["pkt-rate-low"]="" + ["rx-usecs-low"]="" + ["tx-usecs-low"]="" + ["pkt-rate-high"]="" + ["rx-usecs-high"]="" + ["tx-usecs-high"]="" + ["sample-interval"]="" +) + +# populate the expected settings map +for key in ${!SETTINGS_MAP[@]}; do + EXPECTED_SETTINGS[$key]=$(get_value $key) +done + +# test +for key in ${!SETTINGS_MAP[@]}; do + value=$((RANDOM % $((2**32-1)))) + + ethtool -C $NSIM_NETDEV "$key" "$value" + + EXPECTED_SETTINGS[$key]="$value" + expected=${EXPECTED_SETTINGS[@]} + current=$(update_current_settings) + + check $? "$current" "$expected" + set +x +done + +# bool settings which ethtool displays on the same line +ethtool -C $NSIM_NETDEV adaptive-rx on +s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on TX: off") +check $? "$s" "" + +ethtool -C $NSIM_NETDEV adaptive-tx on +s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on TX: on") +check $? "$s" "" + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh new file mode 100644 index 000000000000..9f64d5c7107b --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh @@ -0,0 +1,53 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +NSIM_ID=$((RANDOM % 1024)) +NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID +NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID/ports/0 +NSIM_NETDEV= +num_passes=0 +num_errors=0 + +function cleanup_nsim { + if [ -e $NSIM_DEV_SYS ]; then + echo $NSIM_ID > /sys/bus/netdevsim/del_device + fi +} + +function cleanup { + cleanup_nsim +} + +trap cleanup EXIT + +function check { + local code=$1 + local str=$2 + local exp_str=$3 + + if [ $code -ne 0 ]; then + ((num_errors++)) + return + fi + + if [ "$str" != "$exp_str" ]; then + echo -e "Expected: '$exp_str', got '$str'" + ((num_errors++)) + return + fi + + ((num_passes++)) +} + +function make_netdev { + # Make a netdevsim + old_netdevs=$(ls /sys/class/net) + + if ! $(lsmod | grep -q netdevsim); then + modprobe netdevsim + fi + + echo $NSIM_ID > /sys/bus/netdevsim/new_device + # get new device name + ls /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/ +} diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh new file mode 100755 index 000000000000..b4a7abfe5454 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh @@ -0,0 +1,49 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +# Bail if ethtool is too old +if ! ethtool -h | grep include-stat 2>&1 >/dev/null; then + echo "SKIP: No --include-statistics support in ethtool" + exit 4 +fi + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +echo n > $NSIM_DEV_DFS/ethtool/pause/report_stats_tx +echo n > $NSIM_DEV_DFS/ethtool/pause/report_stats_rx + +s=$(ethtool --json -a $NSIM_NETDEV | jq '.[].statistics') +check $? "$s" "null" + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics') +check $? "$s" "{}" + +echo y > $NSIM_DEV_DFS/ethtool/pause/report_stats_tx + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics | length') +check $? "$s" "1" + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics.tx_pause_frames') +check $? "$s" "2" + +echo y > $NSIM_DEV_DFS/ethtool/pause/report_stats_rx + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics | length') +check $? "$s" "2" + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics.rx_pause_frames') +check $? "$s" "1" +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics.tx_pause_frames') +check $? "$s" "2" + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh new file mode 100755 index 000000000000..c969559ffa7a --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh @@ -0,0 +1,85 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +function get_value { + local query="${SETTINGS_MAP[$1]}" + + echo $(ethtool -g $NSIM_NETDEV | \ + tail -n +$CURR_SETT_LINE | \ + awk -F':' -v pattern="$query:" '$0 ~ pattern {gsub(/[\t ]/, "", $2); print $2}') +} + +function update_current_settings { + for key in ${!SETTINGS_MAP[@]}; do + CURRENT_SETTINGS[$key]=$(get_value $key) + done + echo ${CURRENT_SETTINGS[@]} +} + +if ! ethtool -h | grep -q set-ring >/dev/null; then + echo "SKIP: No --set-ring support in ethtool" + exit 4 +fi + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +declare -A SETTINGS_MAP=( + ["rx"]="RX" + ["rx-mini"]="RX Mini" + ["rx-jumbo"]="RX Jumbo" + ["tx"]="TX" +) + +declare -A EXPECTED_SETTINGS=( + ["rx"]="" + ["rx-mini"]="" + ["rx-jumbo"]="" + ["tx"]="" +) + +declare -A CURRENT_SETTINGS=( + ["rx"]="" + ["rx-mini"]="" + ["rx-jumbo"]="" + ["tx"]="" +) + +MAX_VALUE=$((RANDOM % $((2**32-1)))) +RING_MAX_LIST=$(ls $NSIM_DEV_DFS/ethtool/ring/) + +for ring_max_entry in $RING_MAX_LIST; do + echo $MAX_VALUE > $NSIM_DEV_DFS/ethtool/ring/$ring_max_entry +done + +CURR_SETT_LINE=$(ethtool -g $NSIM_NETDEV | grep -i -m1 -n 'Current hardware settings' | cut -f1 -d:) + +# populate the expected settings map +for key in ${!SETTINGS_MAP[@]}; do + EXPECTED_SETTINGS[$key]=$(get_value $key) +done + +# test +for key in ${!SETTINGS_MAP[@]}; do + value=$((RANDOM % $MAX_VALUE)) + + ethtool -G $NSIM_NETDEV "$key" "$value" + + EXPECTED_SETTINGS[$key]="$value" + expected=${EXPECTED_SETTINGS[@]} + current=$(update_current_settings) + + check $? "$current" "$expected" + set +x +done + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/fib.sh b/tools/testing/selftests/drivers/net/netdevsim/fib.sh index 2f87c3be76a9..251f228ce63e 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/fib.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/fib.sh @@ -302,6 +302,16 @@ ipv6_error_path() ipv6_error_path_replay } +fib_notify_on_flag_change_set() +{ + local notify=$1; shift + + ip netns exec testns1 sysctl -qw net.ipv4.fib_notify_on_flag_change=$notify + ip netns exec testns1 sysctl -qw net.ipv6.fib_notify_on_flag_change=$notify + + log_info "Set fib_notify_on_flag_change to $notify" +} + setup_prepare() { local netdev @@ -336,6 +346,10 @@ trap cleanup EXIT setup_prepare +fib_notify_on_flag_change_set 1 +tests_run + +fib_notify_on_flag_change_set 0 tests_run exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh b/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh new file mode 100755 index 000000000000..8d91191a098c --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh @@ -0,0 +1,430 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ipv4_route_addition_test + ipv4_route_deletion_test + ipv4_route_replacement_test + ipv4_route_offload_failed_test + ipv6_route_addition_test + ipv6_route_deletion_test + ipv6_route_replacement_test + ipv6_route_offload_failed_test +" + +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +DEVLINK_DEV=netdevsim/${DEV} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/ +NUM_NETIFS=0 +source $lib_dir/lib.sh + +check_rt_offload_failed() +{ + local outfile=$1; shift + local line + + # Make sure that the first notification was emitted without + # RTM_F_OFFLOAD_FAILED flag and the second with RTM_F_OFFLOAD_FAILED + # flag + head -n 1 $outfile | grep -q "rt_offload_failed" + if [[ $? -eq 0 ]]; then + return 1 + fi + + head -n 2 $outfile | tail -n 1 | grep -q "rt_offload_failed" +} + +check_rt_trap() +{ + local outfile=$1; shift + local line + + # Make sure that the first notification was emitted without RTM_F_TRAP + # flag and the second with RTM_F_TRAP flag + head -n 1 $outfile | grep -q "rt_trap" + if [[ $? -eq 0 ]]; then + return 1 + fi + + head -n 2 $outfile | tail -n 1 | grep -q "rt_trap" +} + +route_notify_check() +{ + local outfile=$1; shift + local expected_num_lines=$1; shift + local offload_failed=${1:-0}; shift + + # check the monitor results + lines=`wc -l $outfile | cut "-d " -f1` + test $lines -eq $expected_num_lines + check_err $? "$expected_num_lines notifications were expected but $lines were received" + + if [[ $expected_num_lines -eq 1 ]]; then + return + fi + + if [[ $offload_failed -eq 0 ]]; then + check_rt_trap $outfile + check_err $? "Wrong RTM_F_TRAP flags in notifications" + else + check_rt_offload_failed $outfile + check_err $? "Wrong RTM_F_OFFLOAD_FAILED flags in notifications" + fi +} + +route_addition_check() +{ + local ip=$1; shift + local notify=$1; shift + local route=$1; shift + local expected_num_notifications=$1; shift + local offload_failed=${1:-0}; shift + + ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify + + local outfile=$(mktemp) + + $IP monitor route &> $outfile & + sleep 1 + $IP route add $route dev dummy1 + sleep 1 + kill %% && wait %% &> /dev/null + + route_notify_check $outfile $expected_num_notifications $offload_failed + rm -f $outfile + + $IP route del $route dev dummy1 +} + +ipv4_route_addition_test() +{ + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + # route_addition_check will assign value to RET. + route_addition_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the programmed route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the programmed + # route. + notify=2 + expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications + + log_test "IPv4 route addition" +} + +route_deletion_check() +{ + local ip=$1; shift + local notify=$1; shift + local route=$1; shift + local expected_num_notifications=$1; shift + + ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify + $IP route add $route dev dummy1 + sleep 1 + + local outfile=$(mktemp) + + $IP monitor route &> $outfile & + sleep 1 + $IP route del $route dev dummy1 + sleep 1 + kill %% && wait %% &> /dev/null + + route_notify_check $outfile $expected_num_notifications + rm -f $outfile +} + +ipv4_route_deletion_test() +{ + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + local expected_num_notifications=1 + + # Make sure a single notification will be emitted for the deleted route, + # regardless of fib_notify_on_flag_change value. + local notify=0 + # route_deletion_check will assign value to RET. + route_deletion_check $ip $notify $route $expected_num_notifications + + notify=1 + route_deletion_check $ip $notify $route $expected_num_notifications + + log_test "IPv4 route deletion" +} + +route_replacement_check() +{ + local ip=$1; shift + local notify=$1; shift + local route=$1; shift + local expected_num_notifications=$1; shift + + ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify + $IP route add $route dev dummy1 + sleep 1 + + local outfile=$(mktemp) + + $IP monitor route &> $outfile & + sleep 1 + $IP route replace $route dev dummy2 + sleep 1 + kill %% && wait %% &> /dev/null + + route_notify_check $outfile $expected_num_notifications + rm -f $outfile + + $IP route del $route dev dummy2 +} + +ipv4_route_replacement_test() +{ + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + + $IP link add name dummy2 type dummy + $IP link set dev dummy2 up + + # Make sure a single notification will be emitted for the new route. + local notify=0 + local expected_num_notifications=1 + # route_replacement_check will assign value to RET. + route_replacement_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_replacement_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the new route. + notify=2 + expected_num_notifications=1 + route_replacement_check $ip $notify $route $expected_num_notifications + + $IP link del name dummy2 + + log_test "IPv4 route replacement" +} + +ipv4_route_offload_failed_test() +{ + + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + local offload_failed=1 + + echo "y"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload to fail" + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # notify=2 means emit notifications only for failed route installation, + # make sure two notifications will be emitted for the new route. + notify=2 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + echo "n"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload not to fail" + + log_test "IPv4 route offload failed" +} + +ipv6_route_addition_test() +{ + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the programmed route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the programmed + # route. + notify=2 + expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications + + log_test "IPv6 route addition" +} + +ipv6_route_deletion_test() +{ + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + local expected_num_notifications=1 + + # Make sure a single notification will be emitted for the deleted route, + # regardless of fib_notify_on_flag_change value. + local notify=0 + route_deletion_check $ip $notify $route $expected_num_notifications + + notify=1 + route_deletion_check $ip $notify $route $expected_num_notifications + + log_test "IPv6 route deletion" +} + +ipv6_route_replacement_test() +{ + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + + $IP link add name dummy2 type dummy + $IP link set dev dummy2 up + + # Make sure a single notification will be emitted for the new route. + local notify=0 + local expected_num_notifications=1 + route_replacement_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_replacement_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the new route. + notify=2 + expected_num_notifications=1 + route_replacement_check $ip $notify $route $expected_num_notifications + + $IP link del name dummy2 + + log_test "IPv6 route replacement" +} + +ipv6_route_offload_failed_test() +{ + + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + local offload_failed=1 + + echo "y"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload to fail" + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # notify=2 means emit notifications only for failed route installation, + # make sure two notifications will be emitted for the new route. + notify=2 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + echo "n"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload not to fail" + + log_test "IPv6 route offload failed" +} + +setup_prepare() +{ + modprobe netdevsim &> /dev/null + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + ip netns add testns1 + + if [ $? -ne 0 ]; then + echo "Failed to add netns \"testns1\"" + exit 1 + fi + + devlink dev reload $DEVLINK_DEV netns testns1 + + if [ $? -ne 0 ]; then + echo "Failed to reload into netns \"testns1\"" + exit 1 + fi + + IP="ip -n testns1" + + $IP link add name dummy1 type dummy + $IP link set dev dummy1 up +} + +cleanup() +{ + pre_cleanup + + $IP link del name dummy1 + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh b/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh new file mode 100755 index 000000000000..be0c1b5ee6b8 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh @@ -0,0 +1,436 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking the nexthop offload API. It makes use of netdevsim +# which registers a listener to the nexthop notification chain. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + nexthop_single_add_test + nexthop_single_add_err_test + nexthop_group_add_test + nexthop_group_add_err_test + nexthop_group_replace_test + nexthop_group_replace_err_test + nexthop_single_replace_test + nexthop_single_replace_err_test + nexthop_single_in_group_replace_test + nexthop_single_in_group_replace_err_test + nexthop_single_in_group_delete_test + nexthop_single_in_group_delete_err_test + nexthop_replay_test + nexthop_replay_err_test +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +DEVLINK_DEV=netdevsim/${DEV} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +NUM_NETIFS=0 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +nexthop_check() +{ + local nharg="$1"; shift + local expected="$1"; shift + + out=$($IP nexthop show ${nharg} | sed -e 's/ *$//') + if [[ "$out" != "$expected" ]]; then + return 1 + fi + + return 0 +} + +nexthop_resource_check() +{ + local expected_occ=$1; shift + + occ=$($DEVLINK -jp resource show $DEVLINK_DEV \ + | jq '.[][][] | select(.name=="nexthops") | .["occ"]') + + if [ $expected_occ -ne $occ ]; then + return 1 + fi + + return 0 +} + +nexthop_resource_set() +{ + local size=$1; shift + + $DEVLINK resource set $DEVLINK_DEV path nexthops size $size + $DEVLINK dev reload $DEVLINK_DEV +} + +nexthop_single_add_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy" + + $IP nexthop del id 1 + nexthop_resource_check 0 + check_err $? "Wrong nexthop occupancy after delete" + + log_test "Single nexthop add and delete" +} + +nexthop_single_add_err_test() +{ + RET=0 + + nexthop_resource_set 1 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 &> /dev/null + check_fail $? "Nexthop addition succeeded when should fail" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop add failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_group_add_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + $IP nexthop add id 10 group 1,20/2,39 + nexthop_check "id 10" "id 10 group 1,20/2,39 trap" + check_err $? "Unexpected weighted nexthop group entry" + + nexthop_resource_check 61 + check_err $? "Wrong weighted nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + log_test "Nexthop group add and delete" + + $IP nexthop flush &> /dev/null +} + +nexthop_group_add_err_test() +{ + RET=0 + + nexthop_resource_set 2 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 &> /dev/null + check_fail $? "Nexthop group addition succeeded when should fail" + + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy" + + log_test "Nexthop group add failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 10 group 1/2/3 + nexthop_check "id 10" "id 10 group 1/2/3 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + log_test "Nexthop group replace" + + $IP nexthop flush &> /dev/null +} + +nexthop_group_replace_err_test() +{ + RET=0 + + nexthop_resource_set 5 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 10 group 1/2/3 &> /dev/null + check_fail $? "Nexthop group replacement succeeded when should fail" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_resource_check 5 + check_err $? "Wrong nexthop occupancy after failure" + + log_test "Nexthop group replace failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_single_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + + $IP nexthop replace id 1 via 192.0.2.3 dev dummy1 + nexthop_check "id 1" "id 1 via 192.0.2.3 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_replace_err_test() +{ + RET=0 + + # This is supposed to cause the replace to fail because the new nexthop + # is programmed before deleting the replaced one. + nexthop_resource_set 1 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + + $IP nexthop replace id 1 via 192.0.2.3 dev dummy1 &> /dev/null + check_fail $? "Nexthop replace succeeded when should fail" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after failure" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy after failure" + + log_test "Single nexthop replace failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_single_in_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 + check_err $? "Failed to replace nexthop when should not" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_group_replace_err_test() +{ + RET=0 + + nexthop_resource_set 5 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 &> /dev/null + check_fail $? "Nexthop replacement succeeded when should fail" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after failure" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in group failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_single_in_group_delete_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop del id 1 + nexthop_check "id 10" "id 10 group 2 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_group_delete_err_test() +{ + RET=0 + + # First, nexthop 1 will be deleted, which will reduce the occupancy to + # 5. Afterwards, a replace notification will be sent for nexthop group + # 10 with only two nexthops. Since the new group is allocated before + # the old is deleted, the replacement will fail as it will result in an + # occupancy of 7. + nexthop_resource_set 6 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2/3 + + $IP nexthop del id 1 + + nexthop_resource_check 5 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in group failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_replay_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $DEVLINK dev reload $DEVLINK_DEV + check_err $? "Failed to reload when should not" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after reload" + + nexthop_check "id 2" "id 2 via 192.0.2.3 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after reload" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry after reload" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + log_test "Nexthop replay" + + $IP nexthop flush &> /dev/null +} + +nexthop_replay_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + # Reduce size of nexthop resource so that reload will fail. + $DEVLINK resource set $DEVLINK_DEV path nexthops size 3 + $DEVLINK dev reload $DEVLINK_DEV &> /dev/null + check_fail $? "Reload succeeded when should fail" + + $DEVLINK resource set $DEVLINK_DEV path nexthops size 9999 + $DEVLINK dev reload $DEVLINK_DEV + check_err $? "Failed to reload when should not" + + log_test "Nexthop replay failure" + + $IP nexthop flush &> /dev/null +} + +setup_prepare() +{ + local netdev + + modprobe netdevsim &> /dev/null + + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + set -e + + ip netns add testns1 + devlink dev reload $DEVLINK_DEV netns testns1 + + IP="ip -netns testns1" + DEVLINK="devlink -N testns1" + + $IP link add name dummy1 up type dummy + $IP address add 192.0.2.1/24 dev dummy1 + + set +e +} + +cleanup() +{ + pre_cleanup + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh index ba1d53b9f815..1b08e042cf94 100644..100755 --- a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh @@ -7,6 +7,7 @@ NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID NSIM_NETDEV= HAS_ETHTOOL= +STATIC_ENTRIES= EXIT_STATUS=0 num_cases=0 num_errors=0 @@ -193,6 +194,21 @@ function check_tables { sleep 0.02 ((retries--)) done + + if [ -n "$HAS_ETHTOOL" -a -n "${STATIC_ENTRIES[0]}" ]; then + fail=0 + for i in "${!STATIC_ENTRIES[@]}"; do + pp_expected=`pre_ethtool ${STATIC_ENTRIES[i]}` + cnt=$(ethtool --show-tunnels $NSIM_NETDEV | grep -c "$pp_expected") + if [ $cnt -ne 1 ]; then + err_cnt "ethtool static entry: $pfx - $msg" + echo " check_table: ethtool does not contain '$pp_expected'" + ethtool --show-tunnels $NSIM_NETDEV + fail=1 + fi + done + [ $fail == 0 ] && pass_cnt + fi } function print_table { @@ -775,6 +791,157 @@ for port in 0 1; do exp1=( 0 0 0 0 ) done +cleanup_nsim + +# shared port tables +pfx="table sharing" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +echo 0 > $NSIM_DEV_DFS/udp_ports_open_only +echo 1 > $NSIM_DEV_DFS/udp_ports_sleep +echo 1 > $NSIM_DEV_DFS/udp_ports_shared + +old_netdevs=$(ls /sys/class/net) +echo 1 > $NSIM_DEV_SYS/new_port +NSIM_NETDEV=`get_netdev_name old_netdevs` +old_netdevs=$(ls /sys/class/net) +echo 2 > $NSIM_DEV_SYS/new_port +NSIM_NETDEV2=`get_netdev_name old_netdevs` + +msg="VxLAN v4 devices" +exp0=( `mke 4789 1` 0 0 0 ) +exp1=( 0 0 0 0 ) +new_vxlan vxlan0 4789 $NSIM_NETDEV +new_vxlan vxlan1 4789 $NSIM_NETDEV2 + +msg="VxLAN v4 devices go down" +exp0=( 0 0 0 0 ) +ifconfig vxlan1 down +ifconfig vxlan0 down +check_tables + +for ifc in vxlan0 vxlan1; do + ifconfig $ifc up +done + +msg="VxLAN v6 device" +exp0=( `mke 4789 1` `mke 4790 1` 0 0 ) +new_vxlan vxlanC 4790 $NSIM_NETDEV 6 + +msg="Geneve device" +exp1=( `mke 6081 2` 0 0 0 ) +new_geneve gnv0 6081 + +msg="NIC device goes down" +ifconfig $NSIM_NETDEV down +check_tables + +msg="NIC device goes up again" +ifconfig $NSIM_NETDEV up +check_tables + +for i in `seq 2`; do + msg="turn feature off - 1, rep $i" + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off + check_tables + + msg="turn feature off - 2, rep $i" + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) + ethtool -K $NSIM_NETDEV2 rx-udp_tunnel-port-offload off + check_tables + + msg="turn feature on - 1, rep $i" + exp0=( `mke 4789 1` `mke 4790 1` 0 0 ) + exp1=( `mke 6081 2` 0 0 0 ) + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on + check_tables + + msg="turn feature on - 2, rep $i" + ethtool -K $NSIM_NETDEV2 rx-udp_tunnel-port-offload on + check_tables +done + +msg="tunnels destroyed 1" +cleanup_tuns +exp0=( 0 0 0 0 ) +exp1=( 0 0 0 0 ) +check_tables + +overflow_table0 "overflow NIC table" + +msg="re-add a port" + +echo 2 > $NSIM_DEV_SYS/del_port +echo 2 > $NSIM_DEV_SYS/new_port +check_tables + +msg="replace VxLAN in overflow table" +exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` ) +del_dev vxlan1 + +msg="vacate VxLAN in overflow table" +exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` ) +del_dev vxlan2 + +echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset +check_tables + +msg="tunnels destroyed 2" +cleanup_tuns +exp0=( 0 0 0 0 ) +exp1=( 0 0 0 0 ) +check_tables + +echo 1 > $NSIM_DEV_SYS/del_port +echo 2 > $NSIM_DEV_SYS/del_port + +cleanup_nsim + +# Static IANA port +pfx="static IANA vxlan" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +echo 1 > $NSIM_DEV_DFS/udp_ports_static_iana_vxlan +STATIC_ENTRIES=( `mke 4789 1` ) + +port=1 +old_netdevs=$(ls /sys/class/net) +echo $port > $NSIM_DEV_SYS/new_port +NSIM_NETDEV=`get_netdev_name old_netdevs` + +msg="check empty" +exp0=( 0 0 0 0 ) +exp1=( 0 0 0 0 ) +check_tables + +msg="add on static port" +new_vxlan vxlan0 4789 $NSIM_NETDEV +new_vxlan vxlan1 4789 $NSIM_NETDEV + +msg="add on different port" +exp0=( `mke 4790 1` 0 0 0 ) +new_vxlan vxlan2 4790 $NSIM_NETDEV + +cleanup_tuns + +msg="tunnels destroyed" +exp0=( 0 0 0 0 ) +exp1=( 0 0 0 0 ) +check_tables + +msg="different type" +new_geneve gnv0 4789 + +cleanup_tuns +cleanup_nsim + +# END + modprobe -r netdevsim if [ $num_errors -eq 0 ]; then diff --git a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh new file mode 100755 index 000000000000..beee0d5646a6 --- /dev/null +++ b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh @@ -0,0 +1,316 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2020 NXP Semiconductors + +WAIT_TIME=1 +NUM_NETIFS=4 +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +require_command tcpdump + +# +# +---------------------------------------------+ +# | DUT ports Generator ports | +# | +--------+ +--------+ +--------+ +--------+ | +# | | | | | | | | | | +# | | eth0 | | eth1 | | eth2 | | eth3 | | +# | | | | | | | | | | +# +-+--------+-+--------+-+--------+-+--------+-+ +# | | | | +# | | | | +# | +-----------+ | +# | | +# +--------------------------------+ + +eth0=${NETIFS[p1]} +eth1=${NETIFS[p2]} +eth2=${NETIFS[p3]} +eth3=${NETIFS[p4]} + +eth0_mac="de:ad:be:ef:00:00" +eth1_mac="de:ad:be:ef:00:01" +eth2_mac="de:ad:be:ef:00:02" +eth3_mac="de:ad:be:ef:00:03" + +# Helpers to map a VCAP IS1 and VCAP IS2 lookup and policy to a chain number +# used by the kernel driver. The numbers are: +# VCAP IS1 lookup 0: 10000 +# VCAP IS1 lookup 1: 11000 +# VCAP IS1 lookup 2: 12000 +# VCAP IS2 lookup 0 policy 0: 20000 +# VCAP IS2 lookup 0 policy 1: 20001 +# VCAP IS2 lookup 0 policy 255: 20255 +# VCAP IS2 lookup 1 policy 0: 21000 +# VCAP IS2 lookup 1 policy 1: 21001 +# VCAP IS2 lookup 1 policy 255: 21255 +IS1() +{ + local lookup=$1 + + echo $((10000 + 1000 * lookup)) +} + +IS2() +{ + local lookup=$1 + local pag=$2 + + echo $((20000 + 1000 * lookup + pag)) +} + +ES0() +{ + echo 0 +} + +# The Ocelot switches have a fixed ingress pipeline composed of: +# +# +----------------------------------------------+ +-----------------------------------------+ +# | VCAP IS1 | | VCAP IS2 | +# | | | | +# | +----------+ +----------+ +----------+ | | +----------+ +----------+ | +# | | Lookup 0 | | Lookup 1 | | Lookup 2 | | --+------> PAG 0: | Lookup 0 | -> | Lookup 1 | | +# | +----------+ -> +----------+ -> +----------+ | | | +----------+ +----------+ | +# | |key&action| |key&action| |key&action| | | | |key&action| |key&action| | +# | |key&action| |key&action| |key&action| | | | | .. | | .. | | +# | | .. | | .. | | .. | | | | +----------+ +----------+ | +# | +----------+ +----------+ +----------+ | | | | +# | selects PAG | | | +----------+ +----------+ | +# +----------------------------------------------+ +------> PAG 1: | Lookup 0 | -> | Lookup 1 | | +# | | +----------+ +----------+ | +# | | |key&action| |key&action| | +# | | | .. | | .. | | +# | | +----------+ +----------+ | +# | | ... | +# | | | +# | | +----------+ +----------+ | +# +----> PAG 254: | Lookup 0 | -> | Lookup 1 | | +# | | +----------+ +----------+ | +# | | |key&action| |key&action| | +# | | | .. | | .. | | +# | | +----------+ +----------+ | +# | | | +# | | +----------+ +----------+ | +# +----> PAG 255: | Lookup 0 | -> | Lookup 1 | | +# | +----------+ +----------+ | +# | |key&action| |key&action| | +# | | .. | | .. | | +# | +----------+ +----------+ | +# +-----------------------------------------+ +# +# Both the VCAP IS1 (Ingress Stage 1) and IS2 (Ingress Stage 2) are indexed +# (looked up) multiple times: IS1 3 times, and IS2 2 times. Each filter +# (key and action pair) can be configured to only match during the first, or +# second, etc, lookup. +# +# During one TCAM lookup, the filter processing stops at the first entry that +# matches, then the pipeline jumps to the next lookup. +# The driver maps each individual lookup of each individual ingress TCAM to a +# separate chain number. For correct rule offloading, it is mandatory that each +# filter installed in one TCAM is terminated by a non-optional GOTO action to +# the next lookup from the fixed pipeline. +# +# A chain can only be used if there is a GOTO action correctly set up from the +# prior lookup in the processing pipeline. Setting up all chains is not +# mandatory. + +# NOTE: VCAP IS1 currently uses only S1_NORMAL half keys and VCAP IS2 +# dynamically chooses between MAC_ETYPE, ARP, IP4_TCP_UDP, IP4_OTHER, which are +# all half keys as well. + +create_tcam_skeleton() +{ + local eth=$1 + + tc qdisc add dev $eth clsact + + # VCAP IS1 is the Ingress Classification TCAM and can offload the + # following actions: + # - skbedit priority + # - vlan pop + # - vlan modify + # - goto (only in lookup 2, the last IS1 lookup) + tc filter add dev $eth ingress chain 0 pref 49152 flower \ + skip_sw action goto chain $(IS1 0) + tc filter add dev $eth ingress chain $(IS1 0) pref 49152 \ + flower skip_sw action goto chain $(IS1 1) + tc filter add dev $eth ingress chain $(IS1 1) pref 49152 \ + flower skip_sw action goto chain $(IS1 2) + tc filter add dev $eth ingress chain $(IS1 2) pref 49152 \ + flower skip_sw action goto chain $(IS2 0 0) + + # VCAP IS2 is the Security Enforcement ingress TCAM and can offload the + # following actions: + # - trap + # - drop + # - police + # The two VCAP IS2 lookups can be segmented into up to 256 groups of + # rules, called Policies. A Policy is selected through the Policy + # Association Group (PAG) action of VCAP IS1 (which is the + # GOTO offload). + tc filter add dev $eth ingress chain $(IS2 0 0) pref 49152 \ + flower skip_sw action goto chain $(IS2 1 0) +} + +setup_prepare() +{ + create_tcam_skeleton $eth0 + + ip link add br0 type bridge + ip link set $eth0 master br0 + ip link set $eth1 master br0 + ip link set br0 up + + ip link add link $eth3 name $eth3.100 type vlan id 100 + ip link set $eth3.100 up + + ip link add link $eth3 name $eth3.200 type vlan id 200 + ip link set $eth3.200 up + + tc filter add dev $eth0 ingress chain $(IS1 1) pref 1 \ + protocol 802.1Q flower skip_sw vlan_id 100 \ + action vlan pop \ + action goto chain $(IS1 2) + + tc filter add dev $eth0 egress chain $(ES0) pref 1 \ + flower skip_sw indev $eth1 \ + action vlan push protocol 802.1Q id 100 + + tc filter add dev $eth0 ingress chain $(IS1 0) pref 2 \ + protocol ipv4 flower skip_sw src_ip 10.1.1.2 \ + action skbedit priority 7 \ + action goto chain $(IS1 1) + + tc filter add dev $eth0 ingress chain $(IS2 0 0) pref 1 \ + protocol ipv4 flower skip_sw ip_proto udp dst_port 5201 \ + action police rate 50mbit burst 64k \ + action goto chain $(IS2 1 0) +} + +cleanup() +{ + ip link del $eth3.200 + ip link del $eth3.100 + tc qdisc del dev $eth0 clsact + ip link del br0 +} + +test_vlan_pop() +{ + printf "Testing VLAN pop.. " + + tcpdump_start $eth2 + + # Work around Mausezahn VLAN builder bug + # (https://github.com/netsniff-ng/netsniff-ng/issues/225) by using + # an 8021q upper + $MZ $eth3.100 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip + + sleep 1 + + tcpdump_stop + + if tcpdump_show | grep -q "$eth3_mac > $eth2_mac, ethertype IPv4"; then + echo "OK" + else + echo "FAIL" + fi + + tcpdump_cleanup +} + +test_vlan_push() +{ + printf "Testing VLAN push.. " + + tcpdump_start $eth3.100 + + $MZ $eth2 -q -c 1 -p 64 -a $eth2_mac -b $eth3_mac -t ip + + sleep 1 + + tcpdump_stop + + if tcpdump_show | grep -q "$eth2_mac > $eth3_mac"; then + echo "OK" + else + echo "FAIL" + fi + + tcpdump_cleanup +} + +test_vlan_modify() +{ + printf "Testing VLAN modification.. " + + ip link set br0 type bridge vlan_filtering 1 + bridge vlan add dev $eth0 vid 200 + bridge vlan add dev $eth0 vid 300 + bridge vlan add dev $eth1 vid 300 + + tc filter add dev $eth0 ingress chain $(IS1 2) pref 3 \ + protocol 802.1Q flower skip_sw vlan_id 200 \ + action vlan modify id 300 \ + action goto chain $(IS2 0 0) + + tcpdump_start $eth2 + + $MZ $eth3.200 -q -c 1 -p 64 -a $eth3_mac -b $eth2_mac -t ip + + sleep 1 + + tcpdump_stop + + if tcpdump_show | grep -q "$eth3_mac > $eth2_mac, .* vlan 300"; then + echo "OK" + else + echo "FAIL" + fi + + tcpdump_cleanup + + tc filter del dev $eth0 ingress chain $(IS1 2) pref 3 + + bridge vlan del dev $eth0 vid 200 + bridge vlan del dev $eth0 vid 300 + bridge vlan del dev $eth1 vid 300 + ip link set br0 type bridge vlan_filtering 0 +} + +test_skbedit_priority() +{ + local num_pkts=100 + + printf "Testing frame prioritization.. " + + before=$(ethtool_stats_get $eth0 'rx_green_prio_7') + + $MZ $eth3 -q -c $num_pkts -p 64 -a $eth3_mac -b $eth2_mac -t ip -A 10.1.1.2 + + after=$(ethtool_stats_get $eth0 'rx_green_prio_7') + + if [ $((after - before)) = $num_pkts ]; then + echo "OK" + else + echo "FAIL" + fi +} + +trap cleanup EXIT + +ALL_TESTS=" + test_vlan_pop + test_vlan_push + test_vlan_modify + test_skbedit_priority +" + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS |