diff options
Diffstat (limited to 'tools/perf/pmu-events/arch/x86/sapphirerapids/frontend.json')
| -rw-r--r-- | tools/perf/pmu-events/arch/x86/sapphirerapids/frontend.json | 50 |
1 files changed, 50 insertions, 0 deletions
diff --git a/tools/perf/pmu-events/arch/x86/sapphirerapids/frontend.json b/tools/perf/pmu-events/arch/x86/sapphirerapids/frontend.json index 93d99318a623..f6e3e40a3b20 100644 --- a/tools/perf/pmu-events/arch/x86/sapphirerapids/frontend.json +++ b/tools/perf/pmu-events/arch/x86/sapphirerapids/frontend.json @@ -1,6 +1,7 @@ [ { "BriefDescription": "Clears due to Unknown Branches.", + "Counter": "0,1,2,3", "EventCode": "0x60", "EventName": "BACLEARS.ANY", "PublicDescription": "Number of times the front-end is resteered when it finds a branch instruction in a fetch line. This is called Unknown Branch which occurs for the first time a branch instruction is fetched or when the branch is not tracked by the BPU (Branch Prediction Unit) anymore.", @@ -9,6 +10,7 @@ }, { "BriefDescription": "Stalls caused by changing prefix length of the instruction.", + "Counter": "0,1,2,3", "EventCode": "0x87", "EventName": "DECODE.LCP", "PublicDescription": "Counts cycles that the Instruction Length decoder (ILD) stalls occurred due to dynamically changing prefix length of the decoded instruction (by operand size prefix instruction 0x66, address size prefix instruction 0x67 or REX.W for Intel64). Count is proportional to the number of prefixes in a 16B-line. This may result in a three-cycle penalty for each LCP (Length changing prefix) in a 16-byte chunk.", @@ -17,6 +19,7 @@ }, { "BriefDescription": "Cycles the Microcode Sequencer is busy.", + "Counter": "0,1,2,3", "EventCode": "0x87", "EventName": "DECODE.MS_BUSY", "SampleAfterValue": "500009", @@ -24,6 +27,7 @@ }, { "BriefDescription": "DSB-to-MITE switch true penalty cycles.", + "Counter": "0,1,2,3", "EventCode": "0x61", "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES", "PublicDescription": "Decode Stream Buffer (DSB) is a Uop-cache that holds translations of previously fetched instructions that were decoded by the legacy x86 decode pipeline (MITE). This event counts fetch penalty cycles when a transition occurs from DSB to MITE.", @@ -32,6 +36,7 @@ }, { "BriefDescription": "Retired Instructions who experienced DSB miss.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.ANY_DSB_MISS", "MSRIndex": "0x3F7", @@ -43,6 +48,7 @@ }, { "BriefDescription": "Retired Instructions who experienced a critical DSB miss.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.DSB_MISS", "MSRIndex": "0x3F7", @@ -54,6 +60,7 @@ }, { "BriefDescription": "Retired Instructions who experienced iTLB true miss.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.ITLB_MISS", "MSRIndex": "0x3F7", @@ -65,6 +72,7 @@ }, { "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.L1I_MISS", "MSRIndex": "0x3F7", @@ -76,6 +84,7 @@ }, { "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.L2_MISS", "MSRIndex": "0x3F7", @@ -87,6 +96,7 @@ }, { "BriefDescription": "Retired instructions after front-end starvation of at least 1 cycle", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.LATENCY_GE_1", "MSRIndex": "0x3F7", @@ -98,6 +108,7 @@ }, { "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.LATENCY_GE_128", "MSRIndex": "0x3F7", @@ -109,6 +120,7 @@ }, { "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.LATENCY_GE_16", "MSRIndex": "0x3F7", @@ -120,6 +132,7 @@ }, { "BriefDescription": "Retired instructions after front-end starvation of at least 2 cycles", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.LATENCY_GE_2", "MSRIndex": "0x3F7", @@ -131,6 +144,7 @@ }, { "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.LATENCY_GE_256", "MSRIndex": "0x3F7", @@ -142,6 +156,7 @@ }, { "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_1", "MSRIndex": "0x3F7", @@ -153,6 +168,7 @@ }, { "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.LATENCY_GE_32", "MSRIndex": "0x3F7", @@ -164,6 +180,7 @@ }, { "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.LATENCY_GE_4", "MSRIndex": "0x3F7", @@ -175,6 +192,7 @@ }, { "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.LATENCY_GE_512", "MSRIndex": "0x3F7", @@ -186,6 +204,7 @@ }, { "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.LATENCY_GE_64", "MSRIndex": "0x3F7", @@ -197,6 +216,7 @@ }, { "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 8 cycles which was not interrupted by a back-end stall.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.LATENCY_GE_8", "MSRIndex": "0x3F7", @@ -208,6 +228,7 @@ }, { "BriefDescription": "FRONTEND_RETIRED.MS_FLOWS", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.MS_FLOWS", "MSRIndex": "0x3F7", @@ -218,6 +239,7 @@ }, { "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss.", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.STLB_MISS", "MSRIndex": "0x3F7", @@ -229,6 +251,7 @@ }, { "BriefDescription": "FRONTEND_RETIRED.UNKNOWN_BRANCH", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0xc6", "EventName": "FRONTEND_RETIRED.UNKNOWN_BRANCH", "MSRIndex": "0x3F7", @@ -239,6 +262,7 @@ }, { "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache miss.", + "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE_DATA.STALLS", "PublicDescription": "Counts cycles where a code line fetch is stalled due to an L1 instruction cache miss. The decode pipeline works at a 32 Byte granularity.", @@ -246,7 +270,18 @@ "UMask": "0x4" }, { + "BriefDescription": "ICACHE_DATA.STALL_PERIODS", + "Counter": "0,1,2,3", + "CounterMask": "1", + "EdgeDetect": "1", + "EventCode": "0x80", + "EventName": "ICACHE_DATA.STALL_PERIODS", + "SampleAfterValue": "500009", + "UMask": "0x4" + }, + { "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache tag miss.", + "Counter": "0,1,2,3", "EventCode": "0x83", "EventName": "ICACHE_TAG.STALLS", "PublicDescription": "Counts cycles where a code fetch is stalled due to L1 instruction cache tag miss.", @@ -255,6 +290,7 @@ }, { "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop", + "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.DSB_CYCLES_ANY", @@ -264,6 +300,7 @@ }, { "BriefDescription": "Cycles DSB is delivering optimal number of Uops", + "Counter": "0,1,2,3", "CounterMask": "6", "EventCode": "0x79", "EventName": "IDQ.DSB_CYCLES_OK", @@ -273,6 +310,7 @@ }, { "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path", + "Counter": "0,1,2,3", "EventCode": "0x79", "EventName": "IDQ.DSB_UOPS", "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path.", @@ -281,6 +319,7 @@ }, { "BriefDescription": "Cycles MITE is delivering any Uop", + "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.MITE_CYCLES_ANY", @@ -290,6 +329,7 @@ }, { "BriefDescription": "Cycles MITE is delivering optimal number of Uops", + "Counter": "0,1,2,3", "CounterMask": "6", "EventCode": "0x79", "EventName": "IDQ.MITE_CYCLES_OK", @@ -299,6 +339,7 @@ }, { "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path", + "Counter": "0,1,2,3", "EventCode": "0x79", "EventName": "IDQ.MITE_UOPS", "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).", @@ -307,6 +348,7 @@ }, { "BriefDescription": "Cycles when uops are being delivered to IDQ while MS is busy", + "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.MS_CYCLES_ANY", @@ -316,6 +358,7 @@ }, { "BriefDescription": "Number of switches from DSB or MITE to the MS", + "Counter": "0,1,2,3", "CounterMask": "1", "EdgeDetect": "1", "EventCode": "0x79", @@ -326,6 +369,7 @@ }, { "BriefDescription": "Uops delivered to IDQ while MS is busy", + "Counter": "0,1,2,3", "EventCode": "0x79", "EventName": "IDQ.MS_UOPS", "PublicDescription": "Counts the total number of uops delivered by the Microcode Sequencer (MS).", @@ -334,6 +378,7 @@ }, { "BriefDescription": "Uops not delivered by IDQ when backend of the machine is not stalled [This event is alias to IDQ_UOPS_NOT_DELIVERED.CORE]", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0x9c", "EventName": "IDQ_BUBBLES.CORE", "PublicDescription": "Counts the number of uops not delivered to by the Instruction Decode Queue (IDQ) to the back-end of the pipeline when there was no back-end stalls. This event counts for one SMT thread in a given cycle. [This event is alias to IDQ_UOPS_NOT_DELIVERED.CORE]", @@ -342,6 +387,7 @@ }, { "BriefDescription": "Cycles when no uops are not delivered by the IDQ when backend of the machine is not stalled [This event is alias to IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE]", + "Counter": "0,1,2,3,4,5,6,7", "CounterMask": "6", "EventCode": "0x9c", "EventName": "IDQ_BUBBLES.CYCLES_0_UOPS_DELIV.CORE", @@ -351,6 +397,7 @@ }, { "BriefDescription": "Cycles when optimal number of uops was delivered to the back-end when the back-end is not stalled [This event is alias to IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK]", + "Counter": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x9c", "EventName": "IDQ_BUBBLES.CYCLES_FE_WAS_OK", @@ -361,6 +408,7 @@ }, { "BriefDescription": "Uops not delivered by IDQ when backend of the machine is not stalled [This event is alias to IDQ_BUBBLES.CORE]", + "Counter": "0,1,2,3,4,5,6,7", "EventCode": "0x9c", "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE", "PublicDescription": "Counts the number of uops not delivered to by the Instruction Decode Queue (IDQ) to the back-end of the pipeline when there was no back-end stalls. This event counts for one SMT thread in a given cycle. [This event is alias to IDQ_BUBBLES.CORE]", @@ -369,6 +417,7 @@ }, { "BriefDescription": "Cycles when no uops are not delivered by the IDQ when backend of the machine is not stalled [This event is alias to IDQ_BUBBLES.CYCLES_0_UOPS_DELIV.CORE]", + "Counter": "0,1,2,3,4,5,6,7", "CounterMask": "6", "EventCode": "0x9c", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE", @@ -378,6 +427,7 @@ }, { "BriefDescription": "Cycles when optimal number of uops was delivered to the back-end when the back-end is not stalled [This event is alias to IDQ_BUBBLES.CYCLES_FE_WAS_OK]", + "Counter": "0,1,2,3,4,5,6,7", "CounterMask": "1", "EventCode": "0x9c", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK", |