diff options
Diffstat (limited to 'tools/perf/pmu-events/arch/x86/jaketown/frontend.json')
| -rw-r--r-- | tools/perf/pmu-events/arch/x86/jaketown/frontend.json | 32 |
1 files changed, 32 insertions, 0 deletions
diff --git a/tools/perf/pmu-events/arch/x86/jaketown/frontend.json b/tools/perf/pmu-events/arch/x86/jaketown/frontend.json index 754ee2749485..3cb468da7011 100644 --- a/tools/perf/pmu-events/arch/x86/jaketown/frontend.json +++ b/tools/perf/pmu-events/arch/x86/jaketown/frontend.json @@ -1,6 +1,7 @@ [ { "BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.", + "Counter": "0,1,2,3", "EventCode": "0xE6", "EventName": "BACLEARS.ANY", "SampleAfterValue": "100003", @@ -8,6 +9,7 @@ }, { "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switches.", + "Counter": "0,1,2,3", "EventCode": "0xAB", "EventName": "DSB2MITE_SWITCHES.COUNT", "SampleAfterValue": "2000003", @@ -15,6 +17,7 @@ }, { "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles.", + "Counter": "0,1,2,3", "EventCode": "0xAB", "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES", "PublicDescription": "This event counts the cycles attributed to a switch from the Decoded Stream Buffer (DSB), which holds decoded instructions, to the legacy decode pipeline. It excludes cycles when the back-end cannot accept new micro-ops. The penalty for these switches is potentially several cycles of instruction starvation, where no micro-ops are delivered to the back-end.", @@ -23,6 +26,7 @@ }, { "BriefDescription": "Cases of cancelling valid Decode Stream Buffer (DSB) fill not because of exceeding way limit.", + "Counter": "0,1,2,3", "EventCode": "0xAC", "EventName": "DSB_FILL.ALL_CANCEL", "SampleAfterValue": "2000003", @@ -30,6 +34,7 @@ }, { "BriefDescription": "Cycles when Decode Stream Buffer (DSB) fill encounter more than 3 Decode Stream Buffer (DSB) lines.", + "Counter": "0,1,2,3", "EventCode": "0xAC", "EventName": "DSB_FILL.EXCEED_DSB_LINES", "SampleAfterValue": "2000003", @@ -37,6 +42,7 @@ }, { "BriefDescription": "Cases of cancelling valid DSB fill not because of exceeding way limit.", + "Counter": "0,1,2,3", "EventCode": "0xAC", "EventName": "DSB_FILL.OTHER_CANCEL", "SampleAfterValue": "2000003", @@ -44,6 +50,7 @@ }, { "BriefDescription": "Number of Instruction Cache, Streaming Buffer and Victim Cache Reads. both cacheable and noncacheable, including UC fetches.", + "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.HIT", "SampleAfterValue": "2000003", @@ -51,6 +58,7 @@ }, { "BriefDescription": "Instruction cache, streaming buffer and victim cache misses.", + "Counter": "0,1,2,3", "EventCode": "0x80", "EventName": "ICACHE.MISSES", "PublicDescription": "This event counts the number of instruction cache, streaming buffer and victim cache misses. Counting includes unchacheable accesses.", @@ -59,6 +67,7 @@ }, { "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering 4 Uops.", + "Counter": "0,1,2,3", "CounterMask": "4", "EventCode": "0x79", "EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS", @@ -67,6 +76,7 @@ }, { "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop.", + "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.ALL_DSB_CYCLES_ANY_UOPS", @@ -75,6 +85,7 @@ }, { "BriefDescription": "Cycles MITE is delivering 4 Uops.", + "Counter": "0,1,2,3", "CounterMask": "4", "EventCode": "0x79", "EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS", @@ -83,6 +94,7 @@ }, { "BriefDescription": "Cycles MITE is delivering any Uop.", + "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.ALL_MITE_CYCLES_ANY_UOPS", @@ -91,6 +103,7 @@ }, { "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path.", + "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.DSB_CYCLES", @@ -99,6 +112,7 @@ }, { "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path.", + "Counter": "0,1,2,3", "EventCode": "0x79", "EventName": "IDQ.DSB_UOPS", "SampleAfterValue": "2000003", @@ -106,6 +120,7 @@ }, { "BriefDescription": "Instruction Decode Queue (IDQ) empty cycles.", + "Counter": "0,1,2,3", "EventCode": "0x79", "EventName": "IDQ.EMPTY", "SampleAfterValue": "2000003", @@ -113,6 +128,7 @@ }, { "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path.", + "Counter": "0,1,2,3", "EventCode": "0x79", "EventName": "IDQ.MITE_ALL_UOPS", "SampleAfterValue": "2000003", @@ -120,6 +136,7 @@ }, { "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path.", + "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.MITE_CYCLES", @@ -128,6 +145,7 @@ }, { "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path.", + "Counter": "0,1,2,3", "EventCode": "0x79", "EventName": "IDQ.MITE_UOPS", "SampleAfterValue": "2000003", @@ -135,6 +153,7 @@ }, { "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy.", + "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.MS_CYCLES", @@ -144,6 +163,7 @@ }, { "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy.", + "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x79", "EventName": "IDQ.MS_DSB_CYCLES", @@ -152,6 +172,7 @@ }, { "BriefDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequencer (MS) is busy.", + "Counter": "0,1,2,3", "CounterMask": "1", "EdgeDetect": "1", "EventCode": "0x79", @@ -161,6 +182,7 @@ }, { "BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy.", + "Counter": "0,1,2,3", "EventCode": "0x79", "EventName": "IDQ.MS_DSB_UOPS", "SampleAfterValue": "2000003", @@ -168,6 +190,7 @@ }, { "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy.", + "Counter": "0,1,2,3", "EventCode": "0x79", "EventName": "IDQ.MS_MITE_UOPS", "SampleAfterValue": "2000003", @@ -175,6 +198,7 @@ }, { "BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.", + "Counter": "0,1,2,3", "CounterMask": "1", "EdgeDetect": "1", "EventCode": "0x79", @@ -184,6 +208,7 @@ }, { "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy.", + "Counter": "0,1,2,3", "EventCode": "0x79", "EventName": "IDQ.MS_UOPS", "SampleAfterValue": "2000003", @@ -191,6 +216,7 @@ }, { "BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled .", + "Counter": "0,1,2,3", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE", "PublicDescription": "This event counts the number of uops not delivered to the back-end per cycle, per thread, when the back-end was not stalled. In the ideal case 4 uops can be delivered each cycle. The event counts the undelivered uops - so if 3 were delivered in one cycle, the counter would be incremented by 1 for that cycle (4 - 3). If the back-end is stalled, the count for this event is not incremented even when uops were not delivered, because the back-end would not have been able to accept them. This event is used in determining the front-end bound category of the top-down pipeline slots characterization.", @@ -199,6 +225,7 @@ }, { "BriefDescription": "Cycles per thread when 4 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled.", + "Counter": "0,1,2,3", "CounterMask": "4", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE", @@ -207,6 +234,7 @@ }, { "BriefDescription": "Counts cycles FE delivered 4 uops or Resource Allocation Table (RAT) was stalling FE.", + "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK", @@ -216,6 +244,7 @@ }, { "BriefDescription": "Cycles when 1 or more uops were delivered to the by the front end.", + "Counter": "0,1,2,3", "CounterMask": "4", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_GE_1_UOP_DELIV.CORE", @@ -225,6 +254,7 @@ }, { "BriefDescription": "Cycles per thread when 3 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled.", + "Counter": "0,1,2,3", "CounterMask": "3", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_1_UOP_DELIV.CORE", @@ -233,6 +263,7 @@ }, { "BriefDescription": "Cycles with less than 2 uops delivered by the front end.", + "Counter": "0,1,2,3", "CounterMask": "2", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_2_UOP_DELIV.CORE", @@ -241,6 +272,7 @@ }, { "BriefDescription": "Cycles with less than 3 uops delivered by the front end.", + "Counter": "0,1,2,3", "CounterMask": "1", "EventCode": "0x9C", "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_3_UOP_DELIV.CORE", |