1 files changed, 124 insertions, 104 deletions

diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 0c8d7c048615..a9205e32a059 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -53,11 +53,10 @@
 /*
  * The timer bases:
  *
- * Note: If we want to add new timer bases, we have to skip the two
- * clock ids captured by the cpu-timers. We do this by holding empty
- * entries rather than doing math adjustment of the clock ids.
- * This ensures that we capture erroneous accesses to these clock ids
- * rather than moving them into the range of valid clock id's.
+ * There are more clockids then hrtimer bases. Thus, we index
+ * into the timer bases by the hrtimer_base_type enum. When trying
+ * to reach a base using a clockid, hrtimer_clockid_to_base()
+ * is used to convert from clockid to the proper hrtimer_base_type.
  */
 DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
 {
@@ -65,39 +64,55 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
 	.clock_base =
 	{
 		{
-			.index = CLOCK_REALTIME,
+			.index = HRTIMER_BASE_MONOTONIC,
+			.clockid = CLOCK_MONOTONIC,
+			.get_time = &ktime_get,
+			.resolution = KTIME_LOW_RES,
+		},
+		{
+			.index = HRTIMER_BASE_REALTIME,
+			.clockid = CLOCK_REALTIME,
 			.get_time = &ktime_get_real,
 			.resolution = KTIME_LOW_RES,
 		},
 		{
-			.index = CLOCK_MONOTONIC,
-			.get_time = &ktime_get,
+			.index = HRTIMER_BASE_BOOTTIME,
+			.clockid = CLOCK_BOOTTIME,
+			.get_time = &ktime_get_boottime,
 			.resolution = KTIME_LOW_RES,
 		},
 	}
 };
 
+static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
+	[CLOCK_REALTIME]	= HRTIMER_BASE_REALTIME,
+	[CLOCK_MONOTONIC]	= HRTIMER_BASE_MONOTONIC,
+	[CLOCK_BOOTTIME]	= HRTIMER_BASE_BOOTTIME,
+};
+
+static inline int hrtimer_clockid_to_base(clockid_t clock_id)
+{
+	return hrtimer_clock_to_base_table[clock_id];
+}
+
+
 /*
  * Get the coarse grained time at the softirq based on xtime and
  * wall_to_monotonic.
  */
 static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
 {
-	ktime_t xtim, tomono;
-	struct timespec xts, tom;
-	unsigned long seq;
+	ktime_t xtim, mono, boot;
+	struct timespec xts, tom, slp;
 
-	do {
-		seq = read_seqbegin(&xtime_lock);
-		xts = __current_kernel_time();
-		tom = __get_wall_to_monotonic();
-	} while (read_seqretry(&xtime_lock, seq));
+	get_xtime_and_monotonic_and_sleep_offset(&xts, &tom, &slp);
 
 	xtim = timespec_to_ktime(xts);
-	tomono = timespec_to_ktime(tom);
-	base->clock_base[CLOCK_REALTIME].softirq_time = xtim;
-	base->clock_base[CLOCK_MONOTONIC].softirq_time =
-		ktime_add(xtim, tomono);
+	mono = ktime_add(xtim, timespec_to_ktime(tom));
+	boot = ktime_add(mono, timespec_to_ktime(slp));
+	base->clock_base[HRTIMER_BASE_REALTIME].softirq_time = xtim;
+	base->clock_base[HRTIMER_BASE_MONOTONIC].softirq_time = mono;
+	base->clock_base[HRTIMER_BASE_BOOTTIME].softirq_time = boot;
 }
 
 /*
@@ -184,10 +199,11 @@ switch_hrtimer_base(struct hrtimer *timer, struct hrtimer_clock_base *base,
 	struct hrtimer_cpu_base *new_cpu_base;
 	int this_cpu = smp_processor_id();
 	int cpu = hrtimer_get_target(this_cpu, pinned);
+	int basenum = base->index;
 
 again:
 	new_cpu_base = &per_cpu(hrtimer_bases, cpu);
-	new_base = &new_cpu_base->clock_base[base->index];
+	new_base = &new_cpu_base->clock_base[basenum];
 
 	if (base != new_base) {
 		/*
@@ -334,6 +350,11 @@ EXPORT_SYMBOL_GPL(ktime_add_safe);
 
 static struct debug_obj_descr hrtimer_debug_descr;
 
+static void *hrtimer_debug_hint(void *addr)
+{
+	return ((struct hrtimer *) addr)->function;
+}
+
 /*
  * fixup_init is called when:
  * - an active object is initialized
@@ -393,6 +414,7 @@ static int hrtimer_fixup_free(void *addr, enum debug_obj_state state)
 
 static struct debug_obj_descr hrtimer_debug_descr = {
 	.name		= "hrtimer",
+	.debug_hint	= hrtimer_debug_hint,
 	.fixup_init	= hrtimer_fixup_init,
 	.fixup_activate	= hrtimer_fixup_activate,
 	.fixup_free	= hrtimer_fixup_free,
@@ -602,67 +624,6 @@ static int hrtimer_reprogram(struct hrtimer *timer,
 	return res;
 }
 
-
-/*
- * Retrigger next event is called after clock was set
- *
- * Called with interrupts disabled via on_each_cpu()
- */
-static void retrigger_next_event(void *arg)
-{
-	struct hrtimer_cpu_base *base;
-	struct timespec realtime_offset, wtm;
-	unsigned long seq;
-
-	if (!hrtimer_hres_active())
-		return;
-
-	do {
-		seq = read_seqbegin(&xtime_lock);
-		wtm = __get_wall_to_monotonic();
-	} while (read_seqretry(&xtime_lock, seq));
-	set_normalized_timespec(&realtime_offset, -wtm.tv_sec, -wtm.tv_nsec);
-
-	base = &__get_cpu_var(hrtimer_bases);
-
-	/* Adjust CLOCK_REALTIME offset */
-	raw_spin_lock(&base->lock);
-	base->clock_base[CLOCK_REALTIME].offset =
-		timespec_to_ktime(realtime_offset);
-
-	hrtimer_force_reprogram(base, 0);
-	raw_spin_unlock(&base->lock);
-}
-
-/*
- * Clock realtime was set
- *
- * Change the offset of the realtime clock vs. the monotonic
- * clock.
- *
- * We might have to reprogram the high resolution timer interrupt. On
- * SMP we call the architecture specific code to retrigger _all_ high
- * resolution timer interrupts. On UP we just disable interrupts and
- * call the high resolution interrupt code.
- */
-void clock_was_set(void)
-{
-	/* Retrigger the CPU local events everywhere */
-	on_each_cpu(retrigger_next_event, NULL, 1);
-}
-
-/*
- * During resume we might have to reprogram the high resolution timer
- * interrupt (on the local CPU):
- */
-void hres_timers_resume(void)
-{
-	WARN_ONCE(!irqs_disabled(),
-		  KERN_INFO "hres_timers_resume() called with IRQs enabled!");
-
-	retrigger_next_event(NULL);
-}
-
 /*
  * Initialize the high resolution related parts of cpu_base
  */
@@ -673,14 +634,6 @@ static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base)
 }
 
 /*
- * Initialize the high resolution related parts of a hrtimer
- */
-static inline void hrtimer_init_timer_hres(struct hrtimer *timer)
-{
-}
-
-
-/*
  * When High resolution timers are active, try to reprogram. Note, that in case
  * the state has HRTIMER_STATE_CALLBACK set, no reprogramming and no expiry
  * check happens. The timer gets enqueued into the rbtree. The reprogramming
@@ -705,11 +658,39 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
 }
 
 /*
+ * Retrigger next event is called after clock was set
+ *
+ * Called with interrupts disabled via on_each_cpu()
+ */
+static void retrigger_next_event(void *arg)
+{
+	struct hrtimer_cpu_base *base = &__get_cpu_var(hrtimer_bases);
+	struct timespec realtime_offset, xtim, wtm, sleep;
+
+	if (!hrtimer_hres_active())
+		return;
+
+	/* Optimized out for !HIGH_RES */
+	get_xtime_and_monotonic_and_sleep_offset(&xtim, &wtm, &sleep);
+	set_normalized_timespec(&realtime_offset, -wtm.tv_sec, -wtm.tv_nsec);
+
+	/* Adjust CLOCK_REALTIME offset */
+	raw_spin_lock(&base->lock);
+	base->clock_base[HRTIMER_BASE_REALTIME].offset =
+		timespec_to_ktime(realtime_offset);
+	base->clock_base[HRTIMER_BASE_BOOTTIME].offset =
+		timespec_to_ktime(sleep);
+
+	hrtimer_force_reprogram(base, 0);
+	raw_spin_unlock(&base->lock);
+}
+
+/*
  * Switch to high resolution mode
  */
 static int hrtimer_switch_to_hres(void)
 {
-	int cpu = smp_processor_id();
+	int i, cpu = smp_processor_id();
 	struct hrtimer_cpu_base *base = &per_cpu(hrtimer_bases, cpu);
 	unsigned long flags;
 
@@ -725,8 +706,8 @@ static int hrtimer_switch_to_hres(void)
 		return 0;
 	}
 	base->hres_active = 1;
-	base->clock_base[CLOCK_REALTIME].resolution = KTIME_HIGH_RES;
-	base->clock_base[CLOCK_MONOTONIC].resolution = KTIME_HIGH_RES;
+	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++)
+		base->clock_base[i].resolution = KTIME_HIGH_RES;
 
 	tick_setup_sched_timer();
 
@@ -750,10 +731,43 @@ static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
 	return 0;
 }
 static inline void hrtimer_init_hres(struct hrtimer_cpu_base *base) { }
-static inline void hrtimer_init_timer_hres(struct hrtimer *timer) { }
+static inline void retrigger_next_event(void *arg) { }
 
 #endif /* CONFIG_HIGH_RES_TIMERS */
 
+/*
+ * Clock realtime was set
+ *
+ * Change the offset of the realtime clock vs. the monotonic
+ * clock.
+ *
+ * We might have to reprogram the high resolution timer interrupt. On
+ * SMP we call the architecture specific code to retrigger _all_ high
+ * resolution timer interrupts. On UP we just disable interrupts and
+ * call the high resolution interrupt code.
+ */
+void clock_was_set(void)
+{
+#ifdef CONFIG_HIGH_RES_TIMERS
+	/* Retrigger the CPU local events everywhere */
+	on_each_cpu(retrigger_next_event, NULL, 1);
+#endif
+	timerfd_clock_was_set();
+}
+
+/*
+ * During resume we might have to reprogram the high resolution timer
+ * interrupt (on the local CPU):
+ */
+void hrtimers_resume(void)
+{
+	WARN_ONCE(!irqs_disabled(),
+		  KERN_INFO "hrtimers_resume() called with IRQs enabled!");
+
+	retrigger_next_event(NULL);
+	timerfd_clock_was_set();
+}
+
 static inline void timer_stats_hrtimer_set_start_info(struct hrtimer *timer)
 {
 #ifdef CONFIG_TIMER_STATS
@@ -846,6 +860,7 @@ static int enqueue_hrtimer(struct hrtimer *timer,
 	debug_activate(timer);
 
 	timerqueue_add(&base->active, &timer->node);
+	base->cpu_base->active_bases |= 1 << base->index;
 
 	/*
 	 * HRTIMER_STATE_ENQUEUED is or'ed to the current state to preserve the
@@ -887,6 +902,8 @@ static void __remove_hrtimer(struct hrtimer *timer,
 #endif
 	}
 	timerqueue_del(&base->active, &timer->node);
+	if (!timerqueue_getnext(&base->active))
+		base->cpu_base->active_bases &= ~(1 << base->index);
 out:
 	timer->state = newstate;
 }
@@ -1121,6 +1138,7 @@ static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
 			   enum hrtimer_mode mode)
 {
 	struct hrtimer_cpu_base *cpu_base;
+	int base;
 
 	memset(timer, 0, sizeof(struct hrtimer));
 
@@ -1129,8 +1147,8 @@ static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
 	if (clock_id == CLOCK_REALTIME && mode != HRTIMER_MODE_ABS)
 		clock_id = CLOCK_MONOTONIC;
 
-	timer->base = &cpu_base->clock_base[clock_id];
-	hrtimer_init_timer_hres(timer);
+	base = hrtimer_clockid_to_base(clock_id);
+	timer->base = &cpu_base->clock_base[base];
 	timerqueue_init(&timer->node);
 
 #ifdef CONFIG_TIMER_STATS
@@ -1165,9 +1183,10 @@ EXPORT_SYMBOL_GPL(hrtimer_init);
 int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp)
 {
 	struct hrtimer_cpu_base *cpu_base;
+	int base = hrtimer_clockid_to_base(which_clock);
 
 	cpu_base = &__raw_get_cpu_var(hrtimer_bases);
-	*tp = ktime_to_timespec(cpu_base->clock_base[which_clock].resolution);
+	*tp = ktime_to_timespec(cpu_base->clock_base[base].resolution);
 
 	return 0;
 }
@@ -1222,7 +1241,6 @@ static void __run_hrtimer(struct hrtimer *timer, ktime_t *now)
 void hrtimer_interrupt(struct clock_event_device *dev)
 {
 	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
-	struct hrtimer_clock_base *base;
 	ktime_t expires_next, now, entry_time, delta;
 	int i, retries = 0;
 
@@ -1244,12 +1262,15 @@ retry:
 	 */
 	cpu_base->expires_next.tv64 = KTIME_MAX;
 
-	base = cpu_base->clock_base;
-
 	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
-		ktime_t basenow;
+		struct hrtimer_clock_base *base;
 		struct timerqueue_node *node;
+		ktime_t basenow;
+
+		if (!(cpu_base->active_bases & (1 << i)))
+			continue;
 
+		base = cpu_base->clock_base + i;
 		basenow = ktime_add(now, base->offset);
 
 		while ((node = timerqueue_getnext(&base->active))) {
@@ -1282,7 +1303,6 @@ retry:
 
 			__run_hrtimer(timer, &basenow);
 		}
-		base++;
 	}
 
 	/*
@@ -1513,7 +1533,7 @@ long __sched hrtimer_nanosleep_restart(struct restart_block *restart)
 	struct timespec __user  *rmtp;
 	int ret = 0;
 
-	hrtimer_init_on_stack(&t.timer, restart->nanosleep.index,
+	hrtimer_init_on_stack(&t.timer, restart->nanosleep.clockid,
 				HRTIMER_MODE_ABS);
 	hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires);
 
@@ -1565,7 +1585,7 @@ long hrtimer_nanosleep(struct timespec *rqtp, struct timespec __user *rmtp,
 
 	restart = &current_thread_info()->restart_block;
 	restart->fn = hrtimer_nanosleep_restart;
-	restart->nanosleep.index = t.timer.base->index;
+	restart->nanosleep.clockid = t.timer.base->clockid;
 	restart->nanosleep.rmtp = rmtp;
 	restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer);