diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/acpi/acconfig.h | 2 | ||||
| -rw-r--r-- | include/acpi/acpi_bus.h | 1 | ||||
| -rw-r--r-- | include/acpi/acpixf.h | 2 | ||||
| -rw-r--r-- | include/asm-generic/simd.h | 14 | ||||
| -rw-r--r-- | include/crypto/ablk_helper.h | 31 | ||||
| -rw-r--r-- | include/crypto/algapi.h | 18 | ||||
| -rw-r--r-- | include/crypto/authenc.h | 12 | ||||
| -rw-r--r-- | include/dt-bindings/clk/at91.h | 22 | ||||
| -rw-r--r-- | include/linux/clk/at91_pmc.h | 192 | ||||
| -rw-r--r-- | include/linux/gpio/driver.h | 11 | ||||
| -rw-r--r-- | include/linux/hid-sensor-hub.h | 3 | ||||
| -rw-r--r-- | include/linux/padata.h | 3 | ||||
| -rw-r--r-- | include/linux/slab.h | 102 | ||||
| -rw-r--r-- | include/linux/tegra-powergate.h | 27 | ||||
| -rw-r--r-- | include/trace/ftrace.h | 5 |
15 files changed, 380 insertions, 65 deletions
diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index d98c67001840..3ea214cff349 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -83,7 +83,9 @@ * Should the subsystem abort the loading of an ACPI table if the * table checksum is incorrect? */ +#ifndef ACPI_CHECKSUM_ABORT #define ACPI_CHECKSUM_ABORT FALSE +#endif /* * Generate a version of ACPICA that only supports "reduced hardware" diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 7b2de026a4f3..c602c7718421 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -100,6 +100,7 @@ enum acpi_hotplug_mode { struct acpi_hotplug_profile { struct kobject kobj; bool enabled:1; + bool ignore:1; enum acpi_hotplug_mode mode; }; diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index d8f9457755b4..4278aba96503 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -46,7 +46,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20130927 +#define ACPI_CA_VERSION 0x20131115 #include <acpi/acconfig.h> #include <acpi/actypes.h> diff --git a/include/asm-generic/simd.h b/include/asm-generic/simd.h new file mode 100644 index 000000000000..f57eb7b5c23b --- /dev/null +++ b/include/asm-generic/simd.h @@ -0,0 +1,14 @@ + +#include <linux/hardirq.h> + +/* + * may_use_simd - whether it is allowable at this time to issue SIMD + * instructions or access the SIMD register file + * + * As architectures typically don't preserve the SIMD register file when + * taking an interrupt, !in_interrupt() should be a reasonable default. + */ +static __must_check inline bool may_use_simd(void) +{ + return !in_interrupt(); +} diff --git a/include/crypto/ablk_helper.h b/include/crypto/ablk_helper.h new file mode 100644 index 000000000000..4f93df50c23e --- /dev/null +++ b/include/crypto/ablk_helper.h @@ -0,0 +1,31 @@ +/* + * Shared async block cipher helpers + */ + +#ifndef _CRYPTO_ABLK_HELPER_H +#define _CRYPTO_ABLK_HELPER_H + +#include <linux/crypto.h> +#include <linux/kernel.h> +#include <crypto/cryptd.h> + +struct async_helper_ctx { + struct cryptd_ablkcipher *cryptd_tfm; +}; + +extern int ablk_set_key(struct crypto_ablkcipher *tfm, const u8 *key, + unsigned int key_len); + +extern int __ablk_encrypt(struct ablkcipher_request *req); + +extern int ablk_encrypt(struct ablkcipher_request *req); + +extern int ablk_decrypt(struct ablkcipher_request *req); + +extern void ablk_exit(struct crypto_tfm *tfm); + +extern int ablk_init_common(struct crypto_tfm *tfm, const char *drv_name); + +extern int ablk_init(struct crypto_tfm *tfm); + +#endif /* _CRYPTO_ABLK_HELPER_H */ diff --git a/include/crypto/algapi.h b/include/crypto/algapi.h index 418d270e1806..e73c19e90e38 100644 --- a/include/crypto/algapi.h +++ b/include/crypto/algapi.h @@ -386,5 +386,21 @@ static inline int crypto_requires_sync(u32 type, u32 mask) return (type ^ CRYPTO_ALG_ASYNC) & mask & CRYPTO_ALG_ASYNC; } -#endif /* _CRYPTO_ALGAPI_H */ +noinline unsigned long __crypto_memneq(const void *a, const void *b, size_t size); + +/** + * crypto_memneq - Compare two areas of memory without leaking + * timing information. + * + * @a: One area of memory + * @b: Another area of memory + * @size: The size of the area. + * + * Returns 0 when data is equal, 1 otherwise. + */ +static inline int crypto_memneq(const void *a, const void *b, size_t size) +{ + return __crypto_memneq(a, b, size) != 0UL ? 1 : 0; +} +#endif /* _CRYPTO_ALGAPI_H */ diff --git a/include/crypto/authenc.h b/include/crypto/authenc.h index e47b044929a8..6775059539b5 100644 --- a/include/crypto/authenc.h +++ b/include/crypto/authenc.h @@ -23,5 +23,15 @@ struct crypto_authenc_key_param { __be32 enckeylen; }; -#endif /* _CRYPTO_AUTHENC_H */ +struct crypto_authenc_keys { + const u8 *authkey; + const u8 *enckey; + + unsigned int authkeylen; + unsigned int enckeylen; +}; +int crypto_authenc_extractkeys(struct crypto_authenc_keys *keys, const u8 *key, + unsigned int keylen); + +#endif /* _CRYPTO_AUTHENC_H */ diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clk/at91.h new file mode 100644 index 000000000000..0b4cb999a3f7 --- /dev/null +++ b/include/dt-bindings/clk/at91.h @@ -0,0 +1,22 @@ +/* + * This header provides constants for AT91 pmc status. + * + * The constants defined in this header are being used in dts. + * + * Licensed under GPLv2 or later. + */ + +#ifndef _DT_BINDINGS_CLK_AT91_H +#define _DT_BINDINGS_CLK_AT91_H + +#define AT91_PMC_MOSCS 0 /* MOSCS Flag */ +#define AT91_PMC_LOCKA 1 /* PLLA Lock */ +#define AT91_PMC_LOCKB 2 /* PLLB Lock */ +#define AT91_PMC_MCKRDY 3 /* Master Clock */ +#define AT91_PMC_LOCKU 6 /* UPLL Lock */ +#define AT91_PMC_PCKRDY(id) (8 + (id)) /* Programmable Clock */ +#define AT91_PMC_MOSCSELS 16 /* Main Oscillator Selection */ +#define AT91_PMC_MOSCRCS 17 /* Main On-Chip RC */ +#define AT91_PMC_CFDEV 18 /* Clock Failure Detector Event */ + +#endif diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h new file mode 100644 index 000000000000..a6911ebbd02a --- /dev/null +++ b/include/linux/clk/at91_pmc.h @@ -0,0 +1,192 @@ +/* + * include/linux/clk/at91_pmc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Power Management Controller (PMC) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PMC_H +#define AT91_PMC_H + +#ifndef __ASSEMBLY__ +extern void __iomem *at91_pmc_base; + +#define at91_pmc_read(field) \ + __raw_readl(at91_pmc_base + field) + +#define at91_pmc_write(field, value) \ + __raw_writel(value, at91_pmc_base + field) +#else +.extern at91_pmc_base +#endif + +#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */ +#define AT91_PMC_SCDR 0x04 /* System Clock Disable Register */ + +#define AT91_PMC_SCSR 0x08 /* System Clock Status Register */ +#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ +#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ +#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ +#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ +#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ +#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ +#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_PCK4 (1 << 12) /* Programmable Clock 4 [AT572D940HF only] */ +#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ +#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ + +#define AT91_PMC_PCER 0x10 /* Peripheral Clock Enable Register */ +#define AT91_PMC_PCDR 0x14 /* Peripheral Clock Disable Register */ +#define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */ + +#define AT91_CKGR_UCKR 0x1C /* UTMI Clock Register [some SAM9] */ +#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */ +#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */ +#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */ +#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */ + +#define AT91_CKGR_MOR 0x20 /* Main Oscillator Register [not on SAM9RL] */ +#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass */ +#define AT91_PMC_MOSCRCEN (1 << 3) /* Main On-Chip RC Oscillator Enable [some SAM9] */ +#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ +#define AT91_PMC_KEY (0x37 << 16) /* MOR Writing Key */ +#define AT91_PMC_MOSCSEL (1 << 24) /* Main Oscillator Selection [some SAM9] */ +#define AT91_PMC_CFDEN (1 << 25) /* Clock Failure Detector Enable [some SAM9] */ + +#define AT91_CKGR_MCFR 0x24 /* Main Clock Frequency Register */ +#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ +#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ + +#define AT91_CKGR_PLLAR 0x28 /* PLL A Register */ +#define AT91_CKGR_PLLBR 0x2c /* PLL B Register */ +#define AT91_PMC_DIV (0xff << 0) /* Divider */ +#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ +#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ +#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ +#define AT91_PMC_MUL_GET(n) ((n) >> 16 & 0x7ff) +#define AT91_PMC3_MUL (0x7f << 18) /* PLL Multiplier [SAMA5 only] */ +#define AT91_PMC3_MUL_GET(n) ((n) >> 18 & 0x7f) +#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ +#define AT91_PMC_USBDIV_1 (0 << 28) +#define AT91_PMC_USBDIV_2 (1 << 28) +#define AT91_PMC_USBDIV_4 (2 << 28) +#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ + +#define AT91_PMC_MCKR 0x30 /* Master Clock Register */ +#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ +#define AT91_PMC_CSS_SLOW (0 << 0) +#define AT91_PMC_CSS_MAIN (1 << 0) +#define AT91_PMC_CSS_PLLA (2 << 0) +#define AT91_PMC_CSS_PLLB (3 << 0) +#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */ +#define PMC_PRES_OFFSET 2 +#define AT91_PMC_PRES (7 << PMC_PRES_OFFSET) /* Master Clock Prescaler */ +#define AT91_PMC_PRES_1 (0 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_2 (1 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_4 (2 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_8 (3 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_16 (4 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_32 (5 << PMC_PRES_OFFSET) +#define AT91_PMC_PRES_64 (6 << PMC_PRES_OFFSET) +#define PMC_ALT_PRES_OFFSET 4 +#define AT91_PMC_ALT_PRES (7 << PMC_ALT_PRES_OFFSET) /* Master Clock Prescaler [alternate location] */ +#define AT91_PMC_ALT_PRES_1 (0 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_2 (1 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_4 (2 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_8 (3 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_16 (4 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_32 (5 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_ALT_PRES_64 (6 << PMC_ALT_PRES_OFFSET) +#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ +#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ +#define AT91RM9200_PMC_MDIV_2 (1 << 8) +#define AT91RM9200_PMC_MDIV_3 (2 << 8) +#define AT91RM9200_PMC_MDIV_4 (3 << 8) +#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */ +#define AT91SAM9_PMC_MDIV_2 (1 << 8) +#define AT91SAM9_PMC_MDIV_4 (2 << 8) +#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */ +#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */ +#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ +#define AT91_PMC_PDIV_1 (0 << 12) +#define AT91_PMC_PDIV_2 (1 << 12) +#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */ +#define AT91_PMC_PLLADIV2_OFF (0 << 12) +#define AT91_PMC_PLLADIV2_ON (1 << 12) + +#define AT91_PMC_USB 0x38 /* USB Clock Register [some SAM9 only] */ +#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */ +#define AT91_PMC_USBS_PLLA (0 << 0) +#define AT91_PMC_USBS_UPLL (1 << 0) +#define AT91_PMC_USBS_PLLB (1 << 0) /* [AT91SAMN12 only] */ +#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */ +#define AT91_PMC_OHCIUSBDIV_1 (0x0 << 8) +#define AT91_PMC_OHCIUSBDIV_2 (0x1 << 8) + +#define AT91_PMC_SMD 0x3c /* Soft Modem Clock Register [some SAM9 only] */ +#define AT91_PMC_SMDS (0x1 << 0) /* SMD input clock selection */ +#define AT91_PMC_SMD_DIV (0x1f << 8) /* SMD input clock divider */ +#define AT91_PMC_SMDDIV(n) (((n) << 8) & AT91_PMC_SMD_DIV) + +#define AT91_PMC_PCKR(n) (0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */ +#define AT91_PMC_ALT_PCKR_CSS (0x7 << 0) /* Programmable Clock Source Selection [alternate length] */ +#define AT91_PMC_CSS_MASTER (4 << 0) /* [some SAM9 only] */ +#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */ +#define AT91_PMC_CSSMCK_CSS (0 << 8) +#define AT91_PMC_CSSMCK_MCK (1 << 8) + +#define AT91_PMC_IER 0x60 /* Interrupt Enable Register */ +#define AT91_PMC_IDR 0x64 /* Interrupt Disable Register */ +#define AT91_PMC_SR 0x68 /* Status Register */ +#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ +#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ +#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ +#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ +#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9] */ +#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_MOSCSELS (1 << 16) /* Main Oscillator Selection [some SAM9] */ +#define AT91_PMC_MOSCRCS (1 << 17) /* Main On-Chip RC [some SAM9] */ +#define AT91_PMC_CFDEV (1 << 18) /* Clock Failure Detector Event [some SAM9] */ +#define AT91_PMC_IMR 0x6c /* Interrupt Mask Register */ + +#define AT91_PMC_PLLICPR 0x80 /* PLL Charge Pump Current Register */ + +#define AT91_PMC_PROT 0xe4 /* Write Protect Mode Register [some SAM9] */ +#define AT91_PMC_WPEN (0x1 << 0) /* Write Protect Enable */ +#define AT91_PMC_WPKEY (0xffffff << 8) /* Write Protect Key */ +#define AT91_PMC_PROTKEY (0x504d43 << 8) /* Activation Code */ + +#define AT91_PMC_WPSR 0xe8 /* Write Protect Status Register [some SAM9] */ +#define AT91_PMC_WPVS (0x1 << 0) /* Write Protect Violation Status */ +#define AT91_PMC_WPVSRC (0xffff << 8) /* Write Protect Violation Source */ + +#define AT91_PMC_PCER1 0x100 /* Peripheral Clock Enable Register 1 [SAMA5 only]*/ +#define AT91_PMC_PCDR1 0x104 /* Peripheral Clock Enable Register 1 */ +#define AT91_PMC_PCSR1 0x108 /* Peripheral Clock Enable Register 1 */ + +#define AT91_PMC_PCR 0x10c /* Peripheral Control Register [some SAM9 and SAMA5] */ +#define AT91_PMC_PCR_PID (0x3f << 0) /* Peripheral ID */ +#define AT91_PMC_PCR_CMD (0x1 << 12) /* Command (read=0, write=1) */ +#define AT91_PMC_PCR_DIV(n) ((n) << 16) /* Divisor Value */ +#define AT91_PMC_PCR_DIV0 0x0 /* Peripheral clock is MCK */ +#define AT91_PMC_PCR_DIV2 0x1 /* Peripheral clock is MCK/2 */ +#define AT91_PMC_PCR_DIV4 0x2 /* Peripheral clock is MCK/4 */ +#define AT91_PMC_PCR_DIV8 0x3 /* Peripheral clock is MCK/8 */ +#define AT91_PMC_PCR_EN (0x1 << 28) /* Enable */ + +#endif diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 656a27efb2c8..82eac610ce1a 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -125,6 +125,13 @@ extern struct gpio_chip *gpiochip_find(void *data, int gpiod_lock_as_irq(struct gpio_desc *desc); void gpiod_unlock_as_irq(struct gpio_desc *desc); +enum gpio_lookup_flags { + GPIO_ACTIVE_HIGH = (0 << 0), + GPIO_ACTIVE_LOW = (1 << 0), + GPIO_OPEN_DRAIN = (1 << 1), + GPIO_OPEN_SOURCE = (1 << 2), +}; + /** * Lookup table for associating GPIOs to specific devices and functions using * platform data. @@ -152,9 +159,9 @@ struct gpiod_lookup { */ unsigned int idx; /* - * mask of GPIOF_* values + * mask of GPIO_* values */ - unsigned long flags; + enum gpio_lookup_flags flags; }; /* diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h index a265af294ea4..206a2af6b62b 100644 --- a/include/linux/hid-sensor-hub.h +++ b/include/linux/hid-sensor-hub.h @@ -21,6 +21,8 @@ #include <linux/hid.h> #include <linux/hid-sensor-ids.h> +#include <linux/iio/iio.h> +#include <linux/iio/trigger.h> /** * struct hid_sensor_hub_attribute_info - Attribute info @@ -184,6 +186,7 @@ struct hid_sensor_common { struct platform_device *pdev; unsigned usage_id; bool data_ready; + struct iio_trigger *trigger; struct hid_sensor_hub_attribute_info poll; struct hid_sensor_hub_attribute_info report_state; struct hid_sensor_hub_attribute_info power_state; diff --git a/include/linux/padata.h b/include/linux/padata.h index 86292beebfe2..438694650471 100644 --- a/include/linux/padata.h +++ b/include/linux/padata.h @@ -129,10 +129,9 @@ struct parallel_data { struct padata_serial_queue __percpu *squeue; atomic_t reorder_objects; atomic_t refcnt; + atomic_t seq_nr; struct padata_cpumask cpumask; spinlock_t lock ____cacheline_aligned; - spinlock_t seq_lock; - unsigned int seq_nr; unsigned int processed; struct timer_list timer; }; diff --git a/include/linux/slab.h b/include/linux/slab.h index c2bba248fa63..1e2f4fe12773 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -388,10 +388,55 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags) /** * kmalloc - allocate memory * @size: how many bytes of memory are required. - * @flags: the type of memory to allocate (see kcalloc). + * @flags: the type of memory to allocate. * * kmalloc is the normal method of allocating memory * for objects smaller than page size in the kernel. + * + * The @flags argument may be one of: + * + * %GFP_USER - Allocate memory on behalf of user. May sleep. + * + * %GFP_KERNEL - Allocate normal kernel ram. May sleep. + * + * %GFP_ATOMIC - Allocation will not sleep. May use emergency pools. + * For example, use this inside interrupt handlers. + * + * %GFP_HIGHUSER - Allocate pages from high memory. + * + * %GFP_NOIO - Do not do any I/O at all while trying to get memory. + * + * %GFP_NOFS - Do not make any fs calls while trying to get memory. + * + * %GFP_NOWAIT - Allocation will not sleep. + * + * %GFP_THISNODE - Allocate node-local memory only. + * + * %GFP_DMA - Allocation suitable for DMA. + * Should only be used for kmalloc() caches. Otherwise, use a + * slab created with SLAB_DMA. + * + * Also it is possible to set different flags by OR'ing + * in one or more of the following additional @flags: + * + * %__GFP_COLD - Request cache-cold pages instead of + * trying to return cache-warm pages. + * + * %__GFP_HIGH - This allocation has high priority and may use emergency pools. + * + * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail + * (think twice before using). + * + * %__GFP_NORETRY - If memory is not immediately available, + * then give up at once. + * + * %__GFP_NOWARN - If allocation fails, don't issue any warnings. + * + * %__GFP_REPEAT - If allocation fails initially, try once more before failing. + * + * There are other flags available as well, but these are not intended + * for general use, and so are not documented here. For a full list of + * potential flags, always refer to linux/gfp.h. */ static __always_inline void *kmalloc(size_t size, gfp_t flags) { @@ -502,61 +547,6 @@ int cache_show(struct kmem_cache *s, struct seq_file *m); void print_slabinfo_header(struct seq_file *m); /** - * kmalloc - allocate memory - * @size: how many bytes of memory are required. - * @flags: the type of memory to allocate. - * - * The @flags argument may be one of: - * - * %GFP_USER - Allocate memory on behalf of user. May sleep. - * - * %GFP_KERNEL - Allocate normal kernel ram. May sleep. - * - * %GFP_ATOMIC - Allocation will not sleep. May use emergency pools. - * For example, use this inside interrupt handlers. - * - * %GFP_HIGHUSER - Allocate pages from high memory. - * - * %GFP_NOIO - Do not do any I/O at all while trying to get memory. - * - * %GFP_NOFS - Do not make any fs calls while trying to get memory. - * - * %GFP_NOWAIT - Allocation will not sleep. - * - * %GFP_THISNODE - Allocate node-local memory only. - * - * %GFP_DMA - Allocation suitable for DMA. - * Should only be used for kmalloc() caches. Otherwise, use a - * slab created with SLAB_DMA. - * - * Also it is possible to set different flags by OR'ing - * in one or more of the following additional @flags: - * - * %__GFP_COLD - Request cache-cold pages instead of - * trying to return cache-warm pages. - * - * %__GFP_HIGH - This allocation has high priority and may use emergency pools. - * - * %__GFP_NOFAIL - Indicate that this allocation is in no way allowed to fail - * (think twice before using). - * - * %__GFP_NORETRY - If memory is not immediately available, - * then give up at once. - * - * %__GFP_NOWARN - If allocation fails, don't issue any warnings. - * - * %__GFP_REPEAT - If allocation fails initially, try once more before failing. - * - * There are other flags available as well, but these are not intended - * for general use, and so are not documented here. For a full list of - * potential flags, always refer to linux/gfp.h. - * - * kmalloc is the normal method of allocating memory - * in the kernel. - */ -static __always_inline void *kmalloc(size_t size, gfp_t flags); - -/** * kmalloc_array - allocate memory for an array. * @n: number of elements. * @size: element size. diff --git a/include/linux/tegra-powergate.h b/include/linux/tegra-powergate.h index c98cfa406952..fd4498329c7c 100644 --- a/include/linux/tegra-powergate.h +++ b/include/linux/tegra-powergate.h @@ -45,6 +45,7 @@ struct clk; #define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D +#ifdef CONFIG_ARCH_TEGRA int tegra_powergate_is_powered(int id); int tegra_powergate_power_on(int id); int tegra_powergate_power_off(int id); @@ -52,5 +53,31 @@ int tegra_powergate_remove_clamping(int id); /* Must be called with clk disabled, and returns with clk enabled */ int tegra_powergate_sequence_power_up(int id, struct clk *clk); +#else +static inline int tegra_powergate_is_powered(int id) +{ + return -ENOSYS; +} + +static inline int tegra_powergate_power_on(int id) +{ + return -ENOSYS; +} + +static inline int tegra_powergate_power_off(int id) +{ + return -ENOSYS; +} + +static inline int tegra_powergate_remove_clamping(int id) +{ + return -ENOSYS; +} + +static inline int tegra_powergate_sequence_power_up(int id, struct clk *clk) +{ + return -ENOSYS; +} +#endif #endif /* _MACH_TEGRA_POWERGATE_H_ */ diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h index 52594b20179e..d17a35c6537e 100644 --- a/include/trace/ftrace.h +++ b/include/trace/ftrace.h @@ -372,7 +372,8 @@ ftrace_define_fields_##call(struct ftrace_event_call *event_call) \ __data_size += (len) * sizeof(type); #undef __string -#define __string(item, src) __dynamic_array(char, item, strlen(src) + 1) +#define __string(item, src) __dynamic_array(char, item, \ + strlen((src) ? (const char *)(src) : "(null)") + 1) #undef DECLARE_EVENT_CLASS #define DECLARE_EVENT_CLASS(call, proto, args, tstruct, assign, print) \ @@ -501,7 +502,7 @@ static inline notrace int ftrace_get_offsets_##call( \ #undef __assign_str #define __assign_str(dst, src) \ - strcpy(__get_str(dst), src); + strcpy(__get_str(dst), (src) ? (const char *)(src) : "(null)"); #undef TP_fast_assign #define TP_fast_assign(args...) args |