diff options
Diffstat (limited to 'include/uapi/linux')
| -rw-r--r-- | include/uapi/linux/Kbuild | 1 | ||||
| -rw-r--r-- | include/uapi/linux/audit.h | 1 | ||||
| -rw-r--r-- | include/uapi/linux/bpf.h | 8 | ||||
| -rw-r--r-- | include/uapi/linux/btf.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/cec.h | 1 | ||||
| -rw-r--r-- | include/uapi/linux/dvb/audio.h | 6 | ||||
| -rw-r--r-- | include/uapi/linux/dvb/osd.h | 174 | ||||
| -rw-r--r-- | include/uapi/linux/dvb/video.h | 4 | ||||
| -rw-r--r-- | include/uapi/linux/flat.h | 59 | ||||
| -rw-r--r-- | include/uapi/linux/fuse.h | 7 | ||||
| -rw-r--r-- | include/uapi/linux/iommu.h | 155 | ||||
| -rw-r--r-- | include/uapi/linux/keyctl.h | 19 | ||||
| -rw-r--r-- | include/uapi/linux/media.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/psp-sev.h | 5 | ||||
| -rw-r--r-- | include/uapi/linux/rxrpc.h | 6 | ||||
| -rw-r--r-- | include/uapi/linux/sched.h | 14 | ||||
| -rw-r--r-- | include/uapi/linux/sched/types.h | 66 | ||||
| -rw-r--r-- | include/uapi/linux/sed-opal.h | 21 | ||||
| -rw-r--r-- | include/uapi/linux/snmp.h | 1 | ||||
| -rw-r--r-- | include/uapi/linux/tipc_config.h | 10 | ||||
| -rw-r--r-- | include/uapi/linux/usb/audio.h | 37 | ||||
| -rw-r--r-- | include/uapi/linux/v4l2-controls.h | 23 | ||||
| -rw-r--r-- | include/uapi/linux/videodev2.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/wmi.h | 5 |
24 files changed, 465 insertions, 164 deletions
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index 059dc2bedaf6..34711c5d6968 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 ifeq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),) no-export-headers += a.out.h endif diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index a1280af20336..c89c6495983d 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -281,6 +281,7 @@ #define AUDIT_OBJ_GID 110 #define AUDIT_FIELD_COMPARE 111 #define AUDIT_EXE 112 +#define AUDIT_SADDR_FAM 113 #define AUDIT_ARG0 200 #define AUDIT_ARG1 (AUDIT_ARG0+1) diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 63e0cf66f01a..489e118b69d2 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -192,6 +192,8 @@ enum bpf_attach_type { BPF_LIRC_MODE2, BPF_FLOW_DISSECTOR, BPF_CGROUP_SYSCTL, + BPF_CGROUP_UDP4_RECVMSG, + BPF_CGROUP_UDP6_RECVMSG, __MAX_BPF_ATTACH_TYPE }; @@ -783,7 +785,7 @@ union bpf_attr { * based on a user-provided identifier for all traffic coming from * the tasks belonging to the related cgroup. See also the related * kernel documentation, available from the Linux sources in file - * *Documentation/cgroup-v1/net_cls.txt*. + * *Documentation/cgroup-v1/net_cls.rst*. * * The Linux kernel has two versions for cgroups: there are * cgroups v1 and cgroups v2. Both are available to users, who can @@ -3376,8 +3378,8 @@ struct bpf_raw_tracepoint_args { /* DIRECT: Skip the FIB rules and go to FIB table associated with device * OUTPUT: Do lookup from egress perspective; default is ingress */ -#define BPF_FIB_LOOKUP_DIRECT BIT(0) -#define BPF_FIB_LOOKUP_OUTPUT BIT(1) +#define BPF_FIB_LOOKUP_DIRECT (1U << 0) +#define BPF_FIB_LOOKUP_OUTPUT (1U << 1) enum { BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */ diff --git a/include/uapi/linux/btf.h b/include/uapi/linux/btf.h index 9310652ca4f9..63ae4a39e58b 100644 --- a/include/uapi/linux/btf.h +++ b/include/uapi/linux/btf.h @@ -83,7 +83,7 @@ struct btf_type { * is the 32 bits arrangement: */ #define BTF_INT_ENCODING(VAL) (((VAL) & 0x0f000000) >> 24) -#define BTF_INT_OFFSET(VAL) (((VAL & 0x00ff0000)) >> 16) +#define BTF_INT_OFFSET(VAL) (((VAL) & 0x00ff0000) >> 16) #define BTF_INT_BITS(VAL) ((VAL) & 0x000000ff) /* Attributes stored in the BTF_INT_ENCODING */ diff --git a/include/uapi/linux/cec.h b/include/uapi/linux/cec.h index 3094af68b6e7..5704fa0292b5 100644 --- a/include/uapi/linux/cec.h +++ b/include/uapi/linux/cec.h @@ -144,6 +144,7 @@ static inline void cec_msg_set_reply_to(struct cec_msg *msg, /* cec_msg flags field */ #define CEC_MSG_FL_REPLY_TO_FOLLOWERS (1 << 0) +#define CEC_MSG_FL_RAW (1 << 1) /* cec_msg tx/rx_status field */ #define CEC_TX_STATUS_OK (1 << 0) diff --git a/include/uapi/linux/dvb/audio.h b/include/uapi/linux/dvb/audio.h index afeae063e640..2f869da69171 100644 --- a/include/uapi/linux/dvb/audio.h +++ b/include/uapi/linux/dvb/audio.h @@ -1,6 +1,8 @@ /* SPDX-License-Identifier: LGPL-2.1+ WITH Linux-syscall-note */ /* - * audio.h + * audio.h - DEPRECATED MPEG-TS audio decoder API + * + * NOTE: should not be used on future drivers * * Copyright (C) 2000 Ralph Metzler <ralph@convergence.de> * & Marcus Metzler <marcus@convergence.de> @@ -52,7 +54,7 @@ typedef enum { typedef struct audio_mixer { unsigned int volume_left; unsigned int volume_right; - // what else do we need? bass, pass-through, ... + /* what else do we need? bass, pass-through, ... */ } audio_mixer_t; diff --git a/include/uapi/linux/dvb/osd.h b/include/uapi/linux/dvb/osd.h index e163508b9ae8..858997c74043 100644 --- a/include/uapi/linux/dvb/osd.h +++ b/include/uapi/linux/dvb/osd.h @@ -1,6 +1,8 @@ /* SPDX-License-Identifier: LGPL-2.1+ WITH Linux-syscall-note */ /* - * osd.h + * osd.h - DEPRECATED On Screen Display API + * + * NOTE: should not be used on future drivers * * Copyright (C) 2001 Ralph Metzler <ralph@convergence.de> * & Marcus Metzler <marcus@convergence.de> @@ -28,74 +30,108 @@ #include <linux/compiler.h> typedef enum { - // All functions return -2 on "not open" - OSD_Close=1, // () - // Disables OSD and releases the buffers - // returns 0 on success - OSD_Open, // (x0,y0,x1,y1,BitPerPixel[2/4/8](color&0x0F),mix[0..15](color&0xF0)) - // Opens OSD with this size and bit depth - // returns 0 on success, -1 on DRAM allocation error, -2 on "already open" - OSD_Show, // () - // enables OSD mode - // returns 0 on success - OSD_Hide, // () - // disables OSD mode - // returns 0 on success - OSD_Clear, // () - // Sets all pixel to color 0 - // returns 0 on success - OSD_Fill, // (color) - // Sets all pixel to color <col> - // returns 0 on success - OSD_SetColor, // (color,R{x0},G{y0},B{x1},opacity{y1}) - // set palette entry <num> to <r,g,b>, <mix> and <trans> apply - // R,G,B: 0..255 - // R=Red, G=Green, B=Blue - // opacity=0: pixel opacity 0% (only video pixel shows) - // opacity=1..254: pixel opacity as specified in header - // opacity=255: pixel opacity 100% (only OSD pixel shows) - // returns 0 on success, -1 on error - OSD_SetPalette, // (firstcolor{color},lastcolor{x0},data) - // Set a number of entries in the palette - // sets the entries "firstcolor" through "lastcolor" from the array "data" - // data has 4 byte for each color: - // R,G,B, and a opacity value: 0->transparent, 1..254->mix, 255->pixel - OSD_SetTrans, // (transparency{color}) - // Sets transparency of mixed pixel (0..15) - // returns 0 on success - OSD_SetPixel, // (x0,y0,color) - // sets pixel <x>,<y> to color number <col> - // returns 0 on success, -1 on error - OSD_GetPixel, // (x0,y0) - // returns color number of pixel <x>,<y>, or -1 - OSD_SetRow, // (x0,y0,x1,data) - // fills pixels x0,y through x1,y with the content of data[] - // returns 0 on success, -1 on clipping all pixel (no pixel drawn) - OSD_SetBlock, // (x0,y0,x1,y1,increment{color},data) - // fills pixels x0,y0 through x1,y1 with the content of data[] - // inc contains the width of one line in the data block, - // inc<=0 uses blockwidth as linewidth - // returns 0 on success, -1 on clipping all pixel - OSD_FillRow, // (x0,y0,x1,color) - // fills pixels x0,y through x1,y with the color <col> - // returns 0 on success, -1 on clipping all pixel - OSD_FillBlock, // (x0,y0,x1,y1,color) - // fills pixels x0,y0 through x1,y1 with the color <col> - // returns 0 on success, -1 on clipping all pixel - OSD_Line, // (x0,y0,x1,y1,color) - // draw a line from x0,y0 to x1,y1 with the color <col> - // returns 0 on success - OSD_Query, // (x0,y0,x1,y1,xasp{color}}), yasp=11 - // fills parameters with the picture dimensions and the pixel aspect ratio - // returns 0 on success - OSD_Test, // () - // draws a test picture. for debugging purposes only - // returns 0 on success -// TODO: remove "test" in final version - OSD_Text, // (x0,y0,size,color,text) - OSD_SetWindow, // (x0) set window with number 0<x0<8 as current - OSD_MoveWindow, // move current window to (x0, y0) - OSD_OpenRaw, // Open other types of OSD windows + /* All functions return -2 on "not open" */ + OSD_Close = 1, /* () */ + /* + * Disables OSD and releases the buffers + * returns 0 on success + */ + OSD_Open, /* (x0,y0,x1,y1,BitPerPixel[2/4/8](color&0x0F),mix[0..15](color&0xF0)) */ + /* + * Opens OSD with this size and bit depth + * returns 0 on success, -1 on DRAM allocation error, -2 on "already open" + */ + OSD_Show, /* () */ + /* + * enables OSD mode + * returns 0 on success + */ + OSD_Hide, /* () */ + /* + * disables OSD mode + * returns 0 on success + */ + OSD_Clear, /* () */ + /* + * Sets all pixel to color 0 + * returns 0 on success + */ + OSD_Fill, /* (color) */ + /* + * Sets all pixel to color <col> + * returns 0 on success + */ + OSD_SetColor, /* (color,R{x0},G{y0},B{x1},opacity{y1}) */ + /* + * set palette entry <num> to <r,g,b>, <mix> and <trans> apply + * R,G,B: 0..255 + * R=Red, G=Green, B=Blue + * opacity=0: pixel opacity 0% (only video pixel shows) + * opacity=1..254: pixel opacity as specified in header + * opacity=255: pixel opacity 100% (only OSD pixel shows) + * returns 0 on success, -1 on error + */ + OSD_SetPalette, /* (firstcolor{color},lastcolor{x0},data) */ + /* + * Set a number of entries in the palette + * sets the entries "firstcolor" through "lastcolor" from the array "data" + * data has 4 byte for each color: + * R,G,B, and a opacity value: 0->transparent, 1..254->mix, 255->pixel + */ + OSD_SetTrans, /* (transparency{color}) */ + /* + * Sets transparency of mixed pixel (0..15) + * returns 0 on success + */ + OSD_SetPixel, /* (x0,y0,color) */ + /* + * sets pixel <x>,<y> to color number <col> + * returns 0 on success, -1 on error + */ + OSD_GetPixel, /* (x0,y0) */ + /* returns color number of pixel <x>,<y>, or -1 */ + OSD_SetRow, /* (x0,y0,x1,data) */ + /* + * fills pixels x0,y through x1,y with the content of data[] + * returns 0 on success, -1 on clipping all pixel (no pixel drawn) + */ + OSD_SetBlock, /* (x0,y0,x1,y1,increment{color},data) */ + /* + * fills pixels x0,y0 through x1,y1 with the content of data[] + * inc contains the width of one line in the data block, + * inc<=0 uses blockwidth as linewidth + * returns 0 on success, -1 on clipping all pixel + */ + OSD_FillRow, /* (x0,y0,x1,color) */ + /* + * fills pixels x0,y through x1,y with the color <col> + * returns 0 on success, -1 on clipping all pixel + */ + OSD_FillBlock, /* (x0,y0,x1,y1,color) */ + /* + * fills pixels x0,y0 through x1,y1 with the color <col> + * returns 0 on success, -1 on clipping all pixel + */ + OSD_Line, /* (x0,y0,x1,y1,color) */ + /* + * draw a line from x0,y0 to x1,y1 with the color <col> + * returns 0 on success + */ + OSD_Query, /* (x0,y0,x1,y1,xasp{color}}), yasp=11 */ + /* + * fills parameters with the picture dimensions and the pixel aspect ratio + * returns 0 on success + */ + OSD_Test, /* () */ + /* + * draws a test picture. for debugging purposes only + * returns 0 on success + * TODO: remove "test" in final version + */ + OSD_Text, /* (x0,y0,size,color,text) */ + OSD_SetWindow, /* (x0) set window with number 0<x0<8 as current */ + OSD_MoveWindow, /* move current window to (x0, y0) */ + OSD_OpenRaw, /* Open other types of OSD windows */ } OSD_Command; typedef struct osd_cmd_s { diff --git a/include/uapi/linux/dvb/video.h b/include/uapi/linux/dvb/video.h index 43ba8b0a3d14..179f1ec60af6 100644 --- a/include/uapi/linux/dvb/video.h +++ b/include/uapi/linux/dvb/video.h @@ -1,6 +1,8 @@ /* SPDX-License-Identifier: LGPL-2.1+ WITH Linux-syscall-note */ /* - * video.h + * video.h - DEPRECATED MPEG-TS video decoder API + * + * NOTE: should not be used on future drivers * * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de> * & Ralph Metzler <ralph@convergence.de> diff --git a/include/uapi/linux/flat.h b/include/uapi/linux/flat.h deleted file mode 100644 index 27e595e44fb7..000000000000 --- a/include/uapi/linux/flat.h +++ /dev/null @@ -1,59 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * Copyright (C) 2002-2003 David McCullough <davidm@snapgear.com> - * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> - * The Silver Hammer Group, Ltd. - * - * This file provides the definitions and structures needed to - * support uClinux flat-format executables. - */ - -#ifndef _UAPI_LINUX_FLAT_H -#define _UAPI_LINUX_FLAT_H - - -#define FLAT_VERSION 0x00000004L - -#ifdef CONFIG_BINFMT_SHARED_FLAT -#define MAX_SHARED_LIBS (4) -#else -#define MAX_SHARED_LIBS (1) -#endif - -/* - * To make everything easier to port and manage cross platform - * development, all fields are in network byte order. - */ - -struct flat_hdr { - char magic[4]; - unsigned long rev; /* version (as above) */ - unsigned long entry; /* Offset of first executable instruction - with text segment from beginning of file */ - unsigned long data_start; /* Offset of data segment from beginning of - file */ - unsigned long data_end; /* Offset of end of data segment - from beginning of file */ - unsigned long bss_end; /* Offset of end of bss segment from beginning - of file */ - - /* (It is assumed that data_end through bss_end forms the bss segment.) */ - - unsigned long stack_size; /* Size of stack, in bytes */ - unsigned long reloc_start; /* Offset of relocation records from - beginning of file */ - unsigned long reloc_count; /* Number of relocation records */ - unsigned long flags; - unsigned long build_date; /* When the program/library was built */ - unsigned long filler[5]; /* Reservered, set to zero */ -}; - -#define FLAT_FLAG_RAM 0x0001 /* load program entirely into RAM */ -#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */ -#define FLAT_FLAG_GZIP 0x0004 /* all but the header is compressed */ -#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */ -#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */ - - - -#endif /* _UAPI_LINUX_FLAT_H */ diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h index 19fb55e3c73e..2971d29a42e4 100644 --- a/include/uapi/linux/fuse.h +++ b/include/uapi/linux/fuse.h @@ -130,6 +130,9 @@ * 7.30 * - add FUSE_EXPLICIT_INVAL_DATA * - add FUSE_IOCTL_COMPAT_X32 + * + * 7.31 + * - add FUSE_WRITE_KILL_PRIV flag */ #ifndef _LINUX_FUSE_H @@ -165,7 +168,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 30 +#define FUSE_KERNEL_MINOR_VERSION 31 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -327,9 +330,11 @@ struct fuse_file_lock { * * FUSE_WRITE_CACHE: delayed write from page cache, file handle is guessed * FUSE_WRITE_LOCKOWNER: lock_owner field is valid + * FUSE_WRITE_KILL_PRIV: kill suid and sgid bits */ #define FUSE_WRITE_CACHE (1 << 0) #define FUSE_WRITE_LOCKOWNER (1 << 1) +#define FUSE_WRITE_KILL_PRIV (1 << 2) /** * Read flags diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h new file mode 100644 index 000000000000..fc00c5d4741b --- /dev/null +++ b/include/uapi/linux/iommu.h @@ -0,0 +1,155 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * IOMMU user API definitions + */ + +#ifndef _UAPI_IOMMU_H +#define _UAPI_IOMMU_H + +#include <linux/types.h> + +#define IOMMU_FAULT_PERM_READ (1 << 0) /* read */ +#define IOMMU_FAULT_PERM_WRITE (1 << 1) /* write */ +#define IOMMU_FAULT_PERM_EXEC (1 << 2) /* exec */ +#define IOMMU_FAULT_PERM_PRIV (1 << 3) /* privileged */ + +/* Generic fault types, can be expanded IRQ remapping fault */ +enum iommu_fault_type { + IOMMU_FAULT_DMA_UNRECOV = 1, /* unrecoverable fault */ + IOMMU_FAULT_PAGE_REQ, /* page request fault */ +}; + +enum iommu_fault_reason { + IOMMU_FAULT_REASON_UNKNOWN = 0, + + /* Could not access the PASID table (fetch caused external abort) */ + IOMMU_FAULT_REASON_PASID_FETCH, + + /* PASID entry is invalid or has configuration errors */ + IOMMU_FAULT_REASON_BAD_PASID_ENTRY, + + /* + * PASID is out of range (e.g. exceeds the maximum PASID + * supported by the IOMMU) or disabled. + */ + IOMMU_FAULT_REASON_PASID_INVALID, + + /* + * An external abort occurred fetching (or updating) a translation + * table descriptor + */ + IOMMU_FAULT_REASON_WALK_EABT, + + /* + * Could not access the page table entry (Bad address), + * actual translation fault + */ + IOMMU_FAULT_REASON_PTE_FETCH, + + /* Protection flag check failed */ + IOMMU_FAULT_REASON_PERMISSION, + + /* access flag check failed */ + IOMMU_FAULT_REASON_ACCESS, + + /* Output address of a translation stage caused Address Size fault */ + IOMMU_FAULT_REASON_OOR_ADDRESS, +}; + +/** + * struct iommu_fault_unrecoverable - Unrecoverable fault data + * @reason: reason of the fault, from &enum iommu_fault_reason + * @flags: parameters of this fault (IOMMU_FAULT_UNRECOV_* values) + * @pasid: Process Address Space ID + * @perm: requested permission access using by the incoming transaction + * (IOMMU_FAULT_PERM_* values) + * @addr: offending page address + * @fetch_addr: address that caused a fetch abort, if any + */ +struct iommu_fault_unrecoverable { + __u32 reason; +#define IOMMU_FAULT_UNRECOV_PASID_VALID (1 << 0) +#define IOMMU_FAULT_UNRECOV_ADDR_VALID (1 << 1) +#define IOMMU_FAULT_UNRECOV_FETCH_ADDR_VALID (1 << 2) + __u32 flags; + __u32 pasid; + __u32 perm; + __u64 addr; + __u64 fetch_addr; +}; + +/** + * struct iommu_fault_page_request - Page Request data + * @flags: encodes whether the corresponding fields are valid and whether this + * is the last page in group (IOMMU_FAULT_PAGE_REQUEST_* values) + * @pasid: Process Address Space ID + * @grpid: Page Request Group Index + * @perm: requested page permissions (IOMMU_FAULT_PERM_* values) + * @addr: page address + * @private_data: device-specific private information + */ +struct iommu_fault_page_request { +#define IOMMU_FAULT_PAGE_REQUEST_PASID_VALID (1 << 0) +#define IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE (1 << 1) +#define IOMMU_FAULT_PAGE_REQUEST_PRIV_DATA (1 << 2) + __u32 flags; + __u32 pasid; + __u32 grpid; + __u32 perm; + __u64 addr; + __u64 private_data[2]; +}; + +/** + * struct iommu_fault - Generic fault data + * @type: fault type from &enum iommu_fault_type + * @padding: reserved for future use (should be zero) + * @event: fault event, when @type is %IOMMU_FAULT_DMA_UNRECOV + * @prm: Page Request message, when @type is %IOMMU_FAULT_PAGE_REQ + * @padding2: sets the fault size to allow for future extensions + */ +struct iommu_fault { + __u32 type; + __u32 padding; + union { + struct iommu_fault_unrecoverable event; + struct iommu_fault_page_request prm; + __u8 padding2[56]; + }; +}; + +/** + * enum iommu_page_response_code - Return status of fault handlers + * @IOMMU_PAGE_RESP_SUCCESS: Fault has been handled and the page tables + * populated, retry the access. This is "Success" in PCI PRI. + * @IOMMU_PAGE_RESP_FAILURE: General error. Drop all subsequent faults from + * this device if possible. This is "Response Failure" in PCI PRI. + * @IOMMU_PAGE_RESP_INVALID: Could not handle this fault, don't retry the + * access. This is "Invalid Request" in PCI PRI. + */ +enum iommu_page_response_code { + IOMMU_PAGE_RESP_SUCCESS = 0, + IOMMU_PAGE_RESP_INVALID, + IOMMU_PAGE_RESP_FAILURE, +}; + +/** + * struct iommu_page_response - Generic page response information + * @version: API version of this structure + * @flags: encodes whether the corresponding fields are valid + * (IOMMU_FAULT_PAGE_RESPONSE_* values) + * @pasid: Process Address Space ID + * @grpid: Page Request Group Index + * @code: response code from &enum iommu_page_response_code + */ +struct iommu_page_response { +#define IOMMU_PAGE_RESP_VERSION_1 1 + __u32 version; +#define IOMMU_PAGE_RESP_PASID_VALID (1 << 0) + __u32 flags; + __u32 pasid; + __u32 grpid; + __u32 code; +}; + +#endif /* _UAPI_IOMMU_H */ diff --git a/include/uapi/linux/keyctl.h b/include/uapi/linux/keyctl.h index f45ee0f69c0c..ed3d5893830d 100644 --- a/include/uapi/linux/keyctl.h +++ b/include/uapi/linux/keyctl.h @@ -67,6 +67,8 @@ #define KEYCTL_PKEY_SIGN 27 /* Create a public key signature */ #define KEYCTL_PKEY_VERIFY 28 /* Verify a public key signature */ #define KEYCTL_RESTRICT_KEYRING 29 /* Restrict keys allowed to link to a keyring */ +#define KEYCTL_MOVE 30 /* Move keys between keyrings */ +#define KEYCTL_CAPABILITIES 31 /* Find capabilities of keyrings subsystem */ /* keyctl structures */ struct keyctl_dh_params { @@ -112,4 +114,21 @@ struct keyctl_pkey_params { __u32 __spare[7]; }; +#define KEYCTL_MOVE_EXCL 0x00000001 /* Do not displace from the to-keyring */ + +/* + * Capabilities flags. The capabilities list is an array of 8-bit integers; + * each integer can carry up to 8 flags. + */ +#define KEYCTL_CAPS0_CAPABILITIES 0x01 /* KEYCTL_CAPABILITIES supported */ +#define KEYCTL_CAPS0_PERSISTENT_KEYRINGS 0x02 /* Persistent keyrings enabled */ +#define KEYCTL_CAPS0_DIFFIE_HELLMAN 0x04 /* Diffie-Hellman computation enabled */ +#define KEYCTL_CAPS0_PUBLIC_KEY 0x08 /* Public key ops enabled */ +#define KEYCTL_CAPS0_BIG_KEY 0x10 /* big_key-type enabled */ +#define KEYCTL_CAPS0_INVALIDATE 0x20 /* KEYCTL_INVALIDATE supported */ +#define KEYCTL_CAPS0_RESTRICT_KEYRING 0x40 /* KEYCTL_RESTRICT_KEYRING supported */ +#define KEYCTL_CAPS0_MOVE 0x80 /* KEYCTL_MOVE supported */ +#define KEYCTL_CAPS1_NS_KEYRING_NAME 0x01 /* Keyring names are per-user_namespace */ +#define KEYCTL_CAPS1_NS_KEY_TAG 0x02 /* Key indexing can include a namespace tag */ + #endif /* _LINUX_KEYCTL_H */ diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h index 9aedb187bc48..383ac7b7d8f0 100644 --- a/include/uapi/linux/media.h +++ b/include/uapi/linux/media.h @@ -146,7 +146,7 @@ struct media_device_info { #define MEDIA_ENT_FL_CONNECTOR (1 << 1) /* OR with the entity id value to find the next entity */ -#define MEDIA_ENT_ID_FLAG_NEXT (1 << 31) +#define MEDIA_ENT_ID_FLAG_NEXT (1U << 31) struct media_entity_desc { __u32 id; diff --git a/include/uapi/linux/psp-sev.h b/include/uapi/linux/psp-sev.h index 43521d500c2b..8654b2442f6a 100644 --- a/include/uapi/linux/psp-sev.h +++ b/include/uapi/linux/psp-sev.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Userspace interface for AMD Secure Encrypted Virtualization (SEV) * platform management commands. @@ -7,10 +8,6 @@ * Author: Brijesh Singh <brijesh.singh@amd.com> * * SEV API specification is available at: https://developer.amd.com/sev/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __PSP_SEV_USER_H__ diff --git a/include/uapi/linux/rxrpc.h b/include/uapi/linux/rxrpc.h index 9335d92c14a4..782069dcf607 100644 --- a/include/uapi/linux/rxrpc.h +++ b/include/uapi/linux/rxrpc.h @@ -1,12 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ /* Types and definitions for AF_RXRPC. * * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. */ #ifndef _UAPI_LINUX_RXRPC_H diff --git a/include/uapi/linux/sched.h b/include/uapi/linux/sched.h index f5331dbdcaa2..b3105ac1381a 100644 --- a/include/uapi/linux/sched.h +++ b/include/uapi/linux/sched.h @@ -67,9 +67,21 @@ struct clone_args { #define SCHED_FLAG_RESET_ON_FORK 0x01 #define SCHED_FLAG_RECLAIM 0x02 #define SCHED_FLAG_DL_OVERRUN 0x04 +#define SCHED_FLAG_KEEP_POLICY 0x08 +#define SCHED_FLAG_KEEP_PARAMS 0x10 +#define SCHED_FLAG_UTIL_CLAMP_MIN 0x20 +#define SCHED_FLAG_UTIL_CLAMP_MAX 0x40 + +#define SCHED_FLAG_KEEP_ALL (SCHED_FLAG_KEEP_POLICY | \ + SCHED_FLAG_KEEP_PARAMS) + +#define SCHED_FLAG_UTIL_CLAMP (SCHED_FLAG_UTIL_CLAMP_MIN | \ + SCHED_FLAG_UTIL_CLAMP_MAX) #define SCHED_FLAG_ALL (SCHED_FLAG_RESET_ON_FORK | \ SCHED_FLAG_RECLAIM | \ - SCHED_FLAG_DL_OVERRUN) + SCHED_FLAG_DL_OVERRUN | \ + SCHED_FLAG_KEEP_ALL | \ + SCHED_FLAG_UTIL_CLAMP) #endif /* _UAPI_LINUX_SCHED_H */ diff --git a/include/uapi/linux/sched/types.h b/include/uapi/linux/sched/types.h index 10fbb8031930..c852153ddb0d 100644 --- a/include/uapi/linux/sched/types.h +++ b/include/uapi/linux/sched/types.h @@ -9,6 +9,7 @@ struct sched_param { }; #define SCHED_ATTR_SIZE_VER0 48 /* sizeof first published struct */ +#define SCHED_ATTR_SIZE_VER1 56 /* add: util_{min,max} */ /* * Extended scheduling parameters data structure. @@ -21,8 +22,33 @@ struct sched_param { * the tasks may be useful for a wide variety of application fields, e.g., * multimedia, streaming, automation and control, and many others. * - * This variant (sched_attr) is meant at describing a so-called - * sporadic time-constrained task. In such model a task is specified by: + * This variant (sched_attr) allows to define additional attributes to + * improve the scheduler knowledge about task requirements. + * + * Scheduling Class Attributes + * =========================== + * + * A subset of sched_attr attributes specifies the + * scheduling policy and relative POSIX attributes: + * + * @size size of the structure, for fwd/bwd compat. + * + * @sched_policy task's scheduling policy + * @sched_nice task's nice value (SCHED_NORMAL/BATCH) + * @sched_priority task's static priority (SCHED_FIFO/RR) + * + * Certain more advanced scheduling features can be controlled by a + * predefined set of flags via the attribute: + * + * @sched_flags for customizing the scheduler behaviour + * + * Sporadic Time-Constrained Task Attributes + * ========================================= + * + * A subset of sched_attr attributes allows to describe a so-called + * sporadic time-constrained task. + * + * In such a model a task is specified by: * - the activation period or minimum instance inter-arrival time; * - the maximum (or average, depending on the actual scheduling * discipline) computation time of all instances, a.k.a. runtime; @@ -34,14 +60,8 @@ struct sched_param { * than the runtime and must be completed by time instant t equal to * the instance activation time + the deadline. * - * This is reflected by the actual fields of the sched_attr structure: + * This is reflected by the following fields of the sched_attr structure: * - * @size size of the structure, for fwd/bwd compat. - * - * @sched_policy task's scheduling policy - * @sched_flags for customizing the scheduler behaviour - * @sched_nice task's nice value (SCHED_NORMAL/BATCH) - * @sched_priority task's static priority (SCHED_FIFO/RR) * @sched_deadline representative of the task's deadline * @sched_runtime representative of the task's runtime * @sched_period representative of the task's period @@ -53,6 +73,29 @@ struct sched_param { * As of now, the SCHED_DEADLINE policy (sched_dl scheduling class) is the * only user of this new interface. More information about the algorithm * available in the scheduling class file or in Documentation/. + * + * Task Utilization Attributes + * =========================== + * + * A subset of sched_attr attributes allows to specify the utilization + * expected for a task. These attributes allow to inform the scheduler about + * the utilization boundaries within which it should schedule the task. These + * boundaries are valuable hints to support scheduler decisions on both task + * placement and frequency selection. + * + * @sched_util_min represents the minimum utilization + * @sched_util_max represents the maximum utilization + * + * Utilization is a value in the range [0..SCHED_CAPACITY_SCALE]. It + * represents the percentage of CPU time used by a task when running at the + * maximum frequency on the highest capacity CPU of the system. For example, a + * 20% utilization task is a task running for 2ms every 10ms at maximum + * frequency. + * + * A task with a min utilization value bigger than 0 is more likely scheduled + * on a CPU with a capacity big enough to fit the specified value. + * A task with a max utilization value smaller than 1024 is more likely + * scheduled on a CPU with no more capacity than the specified value. */ struct sched_attr { __u32 size; @@ -70,6 +113,11 @@ struct sched_attr { __u64 sched_runtime; __u64 sched_deadline; __u64 sched_period; + + /* Utilization hints */ + __u32 sched_util_min; + __u32 sched_util_max; + }; #endif /* _UAPI_LINUX_SCHED_TYPES_H */ diff --git a/include/uapi/linux/sed-opal.h b/include/uapi/linux/sed-opal.h index 33e53b80cd1f..c6d035fa1b6c 100644 --- a/include/uapi/linux/sed-opal.h +++ b/include/uapi/linux/sed-opal.h @@ -20,6 +20,11 @@ enum opal_mbr { OPAL_MBR_DISABLE = 0x01, }; +enum opal_mbr_done_flag { + OPAL_MBR_NOT_DONE = 0x0, + OPAL_MBR_DONE = 0x01 +}; + enum opal_user { OPAL_ADMIN1 = 0x0, OPAL_USER1 = 0x01, @@ -95,6 +100,19 @@ struct opal_mbr_data { __u8 __align[7]; }; +struct opal_mbr_done { + struct opal_key key; + __u8 done_flag; + __u8 __align[7]; +}; + +struct opal_shadow_mbr { + struct opal_key key; + const __u64 data; + __u64 offset; + __u64 size; +}; + #define IOC_OPAL_SAVE _IOW('p', 220, struct opal_lock_unlock) #define IOC_OPAL_LOCK_UNLOCK _IOW('p', 221, struct opal_lock_unlock) #define IOC_OPAL_TAKE_OWNERSHIP _IOW('p', 222, struct opal_key) @@ -107,5 +125,8 @@ struct opal_mbr_data { #define IOC_OPAL_ENABLE_DISABLE_MBR _IOW('p', 229, struct opal_mbr_data) #define IOC_OPAL_ERASE_LR _IOW('p', 230, struct opal_session_info) #define IOC_OPAL_SECURE_ERASE_LR _IOW('p', 231, struct opal_session_info) +#define IOC_OPAL_PSID_REVERT_TPR _IOW('p', 232, struct opal_key) +#define IOC_OPAL_MBR_DONE _IOW('p', 233, struct opal_mbr_done) +#define IOC_OPAL_WRITE_SHADOW_MBR _IOW('p', 234, struct opal_shadow_mbr) #endif /* _UAPI_SED_OPAL_H */ diff --git a/include/uapi/linux/snmp.h b/include/uapi/linux/snmp.h index 86dc24a96c90..fd42c1316d3d 100644 --- a/include/uapi/linux/snmp.h +++ b/include/uapi/linux/snmp.h @@ -283,6 +283,7 @@ enum LINUX_MIB_TCPACKCOMPRESSED, /* TCPAckCompressed */ LINUX_MIB_TCPZEROWINDOWDROP, /* TCPZeroWindowDrop */ LINUX_MIB_TCPRCVQDROP, /* TCPRcvQDrop */ + LINUX_MIB_TCPWQUEUETOOBIG, /* TCPWqueueTooBig */ __LINUX_MIB_MAX }; diff --git a/include/uapi/linux/tipc_config.h b/include/uapi/linux/tipc_config.h index 4b2c93b1934c..4955e1a9f1bc 100644 --- a/include/uapi/linux/tipc_config.h +++ b/include/uapi/linux/tipc_config.h @@ -307,8 +307,10 @@ static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) tlv_ptr = (struct tlv_desc *)tlv; tlv_ptr->tlv_type = htons(type); tlv_ptr->tlv_len = htons(tlv_len); - if (len && data) - memcpy(TLV_DATA(tlv_ptr), data, tlv_len); + if (len && data) { + memcpy(TLV_DATA(tlv_ptr), data, len); + memset(TLV_DATA(tlv_ptr) + len, 0, TLV_SPACE(len) - tlv_len); + } return TLV_SPACE(len); } @@ -405,8 +407,10 @@ static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags, tcm_hdr->tcm_len = htonl(msg_len); tcm_hdr->tcm_type = htons(cmd); tcm_hdr->tcm_flags = htons(flags); - if (data_len && data) + if (data_len && data) { memcpy(TCM_DATA(msg), data, data_len); + memset(TCM_DATA(msg) + data_len, 0, TCM_SPACE(data_len) - msg_len); + } return TCM_SPACE(data_len); } diff --git a/include/uapi/linux/usb/audio.h b/include/uapi/linux/usb/audio.h index ddc5396800aa..76b7c3f6cd0d 100644 --- a/include/uapi/linux/usb/audio.h +++ b/include/uapi/linux/usb/audio.h @@ -450,6 +450,43 @@ static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_desc } } +/* + * Extension Unit (XU) has almost compatible layout with Processing Unit, but + * on UAC2, it has a different bmControls size (bControlSize); it's 1 byte for + * XU while 2 bytes for PU. The last iExtension field is a one-byte index as + * well as iProcessing field of PU. + */ +static inline __u8 uac_extension_unit_bControlSize(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + switch (protocol) { + case UAC_VERSION_1: + return desc->baSourceID[desc->bNrInPins + 4]; + case UAC_VERSION_2: + return 1; /* in UAC2, this value is constant */ + case UAC_VERSION_3: + return 4; /* in UAC3, this value is constant */ + default: + return 1; + } +} + +static inline __u8 uac_extension_unit_iExtension(struct uac_processing_unit_descriptor *desc, + int protocol) +{ + __u8 control_size = uac_extension_unit_bControlSize(desc, protocol); + + switch (protocol) { + case UAC_VERSION_1: + case UAC_VERSION_2: + default: + return *(uac_processing_unit_bmControls(desc, protocol) + + control_size); + case UAC_VERSION_3: + return 0; /* UAC3 does not have this field */ + } +} + /* 4.5.2 Class-Specific AS Interface Descriptor */ struct uac1_as_header_descriptor { __u8 bLength; /* in bytes: 7 */ diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 37807f23231e..a2669b79b294 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -392,8 +392,13 @@ enum v4l2_mpeg_video_header_mode { #define V4L2_CID_MPEG_VIDEO_MULTI_SLICE_MODE (V4L2_CID_MPEG_BASE+221) enum v4l2_mpeg_video_multi_slice_mode { V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_SINGLE = 0, + V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_MB = 1, + V4L2_MPEG_VIDEO_MULTI_SLICE_MODE_MAX_BYTES = 2, +#ifndef __KERNEL__ + /* Kept for backwards compatibility reasons. Stupid typo... */ V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_MB = 1, V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES = 2, +#endif }; #define V4L2_CID_MPEG_VIDEO_VBV_SIZE (V4L2_CID_MPEG_BASE+222) #define V4L2_CID_MPEG_VIDEO_DEC_PTS (V4L2_CID_MPEG_BASE+223) @@ -404,6 +409,24 @@ enum v4l2_mpeg_video_multi_slice_mode { #define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_MPEG_BASE+228) #define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (V4L2_CID_MPEG_BASE+229) +/* CIDs for the MPEG-2 Part 2 (H.262) codec */ +#define V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL (V4L2_CID_MPEG_BASE+270) +enum v4l2_mpeg_video_mpeg2_level { + V4L2_MPEG_VIDEO_MPEG2_LEVEL_LOW = 0, + V4L2_MPEG_VIDEO_MPEG2_LEVEL_MAIN = 1, + V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH_1440 = 2, + V4L2_MPEG_VIDEO_MPEG2_LEVEL_HIGH = 3, +}; +#define V4L2_CID_MPEG_VIDEO_MPEG2_PROFILE (V4L2_CID_MPEG_BASE+271) +enum v4l2_mpeg_video_mpeg2_profile { + V4L2_MPEG_VIDEO_MPEG2_PROFILE_SIMPLE = 0, + V4L2_MPEG_VIDEO_MPEG2_PROFILE_MAIN = 1, + V4L2_MPEG_VIDEO_MPEG2_PROFILE_SNR_SCALABLE = 2, + V4L2_MPEG_VIDEO_MPEG2_PROFILE_SPATIALLY_SCALABLE = 3, + V4L2_MPEG_VIDEO_MPEG2_PROFILE_HIGH = 4, + V4L2_MPEG_VIDEO_MPEG2_PROFILE_MULTIVIEW = 5, +}; + /* CIDs for the FWHT codec as used by the vicodec driver. */ #define V4L2_CID_FWHT_I_FRAME_QP (V4L2_CID_MPEG_BASE + 290) #define V4L2_CID_FWHT_P_FRAME_QP (V4L2_CID_MPEG_BASE + 291) diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 1050a75fb7ef..9d9705ceda76 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -80,7 +80,7 @@ /* Four-character-code (FOURCC) */ #define v4l2_fourcc(a, b, c, d)\ ((__u32)(a) | ((__u32)(b) << 8) | ((__u32)(c) << 16) | ((__u32)(d) << 24)) -#define v4l2_fourcc_be(a, b, c, d) (v4l2_fourcc(a, b, c, d) | (1 << 31)) +#define v4l2_fourcc_be(a, b, c, d) (v4l2_fourcc(a, b, c, d) | (1U << 31)) /* * E N U M S diff --git a/include/uapi/linux/wmi.h b/include/uapi/linux/wmi.h index 7a92e9e3d1c0..c36f2d7675a4 100644 --- a/include/uapi/linux/wmi.h +++ b/include/uapi/linux/wmi.h @@ -1,11 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * User API methods for ACPI-WMI mapping driver * * Copyright (C) 2017 Dell, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _UAPI_LINUX_WMI_H #define _UAPI_LINUX_WMI_H |