diff options
Diffstat (limited to 'include/linux')
42 files changed, 800 insertions, 146 deletions
diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h index ad895455ab72..0da17d14fd13 100644 --- a/include/linux/auxvec.h +++ b/include/linux/auxvec.h @@ -26,8 +26,10 @@ #define AT_SECURE 23 /* secure mode boolean */ +#define AT_EXECFN 31 /* filename of program */ #ifdef __KERNEL__ -#define AT_VECTOR_SIZE_BASE (14 + 2) /* NEW_AUX_ENT entries in auxiliary table */ +#define AT_VECTOR_SIZE_BASE 17 /* NEW_AUX_ENT entries in auxiliary table */ + /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */ #endif #endif /* _LINUX_AUXVEC_H */ diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index e7e91dbfde0f..2270ca5ec631 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -4,9 +4,6 @@ * Copyright (C) 2001 Russell King * (C) 2002 - 2003 Dominik Brodowski <linux@brodo.de> * - * - * $Id: cpufreq.h,v 1.36 2003/01/20 17:31:48 db Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index 7266124361b4..e1a6c046cea3 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -26,6 +26,8 @@ struct debugfs_blob_wrapper { unsigned long size; }; +extern struct dentry *arch_debugfs_dir; + #if defined(CONFIG_DEBUG_FS) /* declared over in file.c */ @@ -42,6 +44,7 @@ struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent, const char *dest); void debugfs_remove(struct dentry *dentry); +void debugfs_remove_recursive(struct dentry *dentry); struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry, struct dentry *new_dir, const char *new_name); @@ -99,6 +102,9 @@ static inline struct dentry *debugfs_create_symlink(const char *name, static inline void debugfs_remove(struct dentry *dentry) { } +static inline void debugfs_remove_recursive(struct dentry *dentry) +{ } + static inline struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry, struct dentry *new_dir, char *new_name) { diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 0d8d419d191a..a90222e3297d 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -9,11 +9,13 @@ #define _LINUX_DEVICE_MAPPER_H #include <linux/bio.h> +#include <linux/blkdev.h> struct dm_target; struct dm_table; struct dm_dev; struct mapped_device; +struct bio_vec; typedef enum { STATUSTYPE_INFO, STATUSTYPE_TABLE } status_type_t; @@ -72,6 +74,9 @@ typedef int (*dm_ioctl_fn) (struct dm_target *ti, struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg); +typedef int (*dm_merge_fn) (struct dm_target *ti, struct bvec_merge_data *bvm, + struct bio_vec *biovec, int max_size); + void dm_error(const char *message); /* @@ -107,6 +112,7 @@ struct target_type { dm_status_fn status; dm_message_fn message; dm_ioctl_fn ioctl; + dm_merge_fn merge; }; struct io_restrictions { diff --git a/include/linux/device.h b/include/linux/device.h index f71a78d123ae..d24a47f80f9c 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -16,6 +16,7 @@ #include <linux/kobject.h> #include <linux/klist.h> #include <linux/list.h> +#include <linux/lockdep.h> #include <linux/compiler.h> #include <linux/types.h> #include <linux/module.h> @@ -24,17 +25,13 @@ #include <asm/atomic.h> #include <asm/device.h> -#define DEVICE_NAME_SIZE 50 -/* DEVICE_NAME_HALF is really less than half to accommodate slop */ -#define DEVICE_NAME_HALF __stringify(20) -#define DEVICE_ID_SIZE 32 -#define BUS_ID_SIZE KOBJ_NAME_LEN - +#define BUS_ID_SIZE 20 struct device; struct device_driver; struct driver_private; struct class; +struct class_private; struct bus_type; struct bus_type_private; @@ -186,13 +183,9 @@ struct class { const char *name; struct module *owner; - struct kset subsys; - struct list_head devices; - struct list_head interfaces; - struct kset class_dirs; - struct semaphore sem; /* locks children, devices, interfaces */ struct class_attribute *class_attrs; struct device_attribute *dev_attrs; + struct kobject *dev_kobj; int (*dev_uevent)(struct device *dev, struct kobj_uevent_env *env); @@ -203,13 +196,28 @@ struct class { int (*resume)(struct device *dev); struct pm_ops *pm; + struct class_private *p; }; -extern int __must_check class_register(struct class *class); +extern struct kobject *sysfs_dev_block_kobj; +extern struct kobject *sysfs_dev_char_kobj; +extern int __must_check __class_register(struct class *class, + struct lock_class_key *key); extern void class_unregister(struct class *class); -extern int class_for_each_device(struct class *class, void *data, + +/* This is a #define to keep the compiler from merging different + * instances of the __key variable */ +#define class_register(class) \ +({ \ + static struct lock_class_key __key; \ + __class_register(class, &__key); \ +}) + +extern int class_for_each_device(struct class *class, struct device *start, + void *data, int (*fn)(struct device *dev, void *data)); -extern struct device *class_find_device(struct class *class, void *data, +extern struct device *class_find_device(struct class *class, + struct device *start, void *data, int (*match)(struct device *, void *)); struct class_attribute { @@ -237,9 +245,19 @@ struct class_interface { extern int __must_check class_interface_register(struct class_interface *); extern void class_interface_unregister(struct class_interface *); -extern struct class *class_create(struct module *owner, const char *name); +extern struct class * __must_check __class_create(struct module *owner, + const char *name, + struct lock_class_key *key); extern void class_destroy(struct class *cls); +/* This is a #define to keep the compiler from merging different + * instances of the __key variable */ +#define class_create(owner, name) \ +({ \ + static struct lock_class_key __key; \ + __class_create(owner, name, &__key); \ +}) + /* * The type of device, "struct device" is embedded in. A class * or bus can contain devices of different types @@ -468,14 +486,10 @@ extern struct device *device_create_vargs(struct class *cls, const char *fmt, va_list vargs); extern struct device *device_create(struct class *cls, struct device *parent, - dev_t devt, const char *fmt, ...) - __attribute__((format(printf, 4, 5))); -extern struct device *device_create_drvdata(struct class *cls, - struct device *parent, - dev_t devt, - void *drvdata, - const char *fmt, ...) + dev_t devt, void *drvdata, + const char *fmt, ...) __attribute__((format(printf, 5, 6))); +#define device_create_drvdata device_create extern void device_destroy(struct class *cls, dev_t devt); /* diff --git a/include/linux/dm-ioctl.h b/include/linux/dm-ioctl.h index b03c41bbfa14..28c2940eb30d 100644 --- a/include/linux/dm-ioctl.h +++ b/include/linux/dm-ioctl.h @@ -256,9 +256,9 @@ enum { #define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl) #define DM_VERSION_MAJOR 4 -#define DM_VERSION_MINOR 13 +#define DM_VERSION_MINOR 14 #define DM_VERSION_PATCHLEVEL 0 -#define DM_VERSION_EXTRA "-ioctl (2007-10-18)" +#define DM_VERSION_EXTRA "-ioctl (2008-04-23)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ diff --git a/include/linux/dma-attrs.h b/include/linux/dma-attrs.h index 1677e2bfa00c..71ad34eca6e3 100644 --- a/include/linux/dma-attrs.h +++ b/include/linux/dma-attrs.h @@ -12,6 +12,7 @@ */ enum dma_attr { DMA_ATTR_WRITE_BARRIER, + DMA_ATTR_WEAK_ORDERING, DMA_ATTR_MAX, }; diff --git a/include/linux/eisa.h b/include/linux/eisa.h index fe806b6f030d..e61c0be2a459 100644 --- a/include/linux/eisa.h +++ b/include/linux/eisa.h @@ -40,7 +40,7 @@ struct eisa_device { u64 dma_mask; struct device dev; /* generic device */ #ifdef CONFIG_EISA_NAMES - char pretty_name[DEVICE_NAME_SIZE]; + char pretty_name[50]; #endif }; diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h index decc4b56ccf9..8300cab30f9a 100644 --- a/include/linux/fs_enet_pd.h +++ b/include/linux/fs_enet_pd.h @@ -131,11 +131,7 @@ struct fs_platform_info { u32 device_flags; int phy_addr; /* the phy address (-1 no phy) */ -#ifdef CONFIG_PPC_CPM_NEW_BINDING char bus_id[16]; -#else - const char* bus_id; -#endif int phy_irq; /* the phy irq (if it exists) */ const struct fs_mii_bus_info *bus_info; diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index c415a496de3a..4e625e0094c8 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -69,6 +69,7 @@ struct gianfar_mdio_data { #define FSL_GIANFAR_DEV_HAS_VLAN 0x00000020 #define FSL_GIANFAR_DEV_HAS_EXTENDED_HASH 0x00000040 #define FSL_GIANFAR_DEV_HAS_PADDING 0x00000080 +#define FSL_GIANFAR_DEV_HAS_MAGIC_PACKET 0x00000100 /* Flags in gianfar_platform_data */ #define FSL_GIANFAR_BRD_HAS_PHY_INTR 0x00000001 /* set or use a timer */ @@ -125,4 +126,10 @@ struct mpc8xx_pcmcia_ops { int(*voltage_set)(int slot, int vcc, int vpp); }; +/* Returns non-zero if the current suspend operation would + * lead to a deep sleep (i.e. power removed from the core, + * instead of just the clock). + */ +int fsl_deep_sleep(void); + #endif /* _FSL_DEVICE_H_ */ diff --git a/include/linux/gameport.h b/include/linux/gameport.h index afad95272841..f64e29c0ef3f 100644 --- a/include/linux/gameport.h +++ b/include/linux/gameport.h @@ -68,7 +68,6 @@ struct gameport_driver { int gameport_open(struct gameport *gameport, struct gameport_driver *drv, int mode); void gameport_close(struct gameport *gameport); -void gameport_rescan(struct gameport *gameport); #if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE)) diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h index c6d3a9de5634..ec6ecd74781d 100644 --- a/include/linux/gpio_keys.h +++ b/include/linux/gpio_keys.h @@ -9,6 +9,7 @@ struct gpio_keys_button { char *desc; int type; /* input event type (EV_KEY, EV_SW) */ int wakeup; /* configure the button as a wake-up source */ + int debounce_interval; /* debounce ticks interval in msecs */ }; struct gpio_keys_platform_data { diff --git a/include/linux/input.h b/include/linux/input.h index d150c57e5f0a..a5802c9c81a4 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -373,6 +373,8 @@ struct input_absinfo { #define KEY_WIMAX 246 +/* Range 248 - 255 is reserved for special needs of AT keyboard driver */ + #define BTN_MISC 0x100 #define BTN_0 0x100 #define BTN_1 0x101 @@ -640,6 +642,8 @@ struct input_absinfo { #define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" set = radio enabled */ #define SW_RADIO SW_RFKILL_ALL /* deprecated */ +#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */ +#define SW_DOCK 0x05 /* set = plugged into dock */ #define SW_MAX 0x0f #define SW_CNT (SW_MAX+1) @@ -1215,11 +1219,6 @@ struct input_handle { struct list_head h_node; }; -#define to_dev(n) container_of(n, struct input_dev, node) -#define to_handler(n) container_of(n, struct input_handler, node) -#define to_handle(n) container_of(n, struct input_handle, d_node) -#define to_handle_h(n) container_of(n, struct input_handle, h_node) - struct input_dev *input_allocate_device(void); void input_free_device(struct input_dev *dev); diff --git a/include/linux/joystick.h b/include/linux/joystick.h index e2d3a18af456..b5e051295a67 100644 --- a/include/linux/joystick.h +++ b/include/linux/joystick.h @@ -2,8 +2,6 @@ #define _LINUX_JOYSTICK_H /* - * $Id: joystick.h,v 1.3 2000/11/30 11:07:05 vojtech Exp $ - * * Copyright (C) 1996-2000 Vojtech Pavlik * * Sponsored by SuSE diff --git a/include/linux/kmod.h b/include/linux/kmod.h index 5dc13848891b..0509c4ce4857 100644 --- a/include/linux/kmod.h +++ b/include/linux/kmod.h @@ -25,15 +25,16 @@ #define KMOD_PATH_LEN 256 -#ifdef CONFIG_KMOD +#ifdef CONFIG_MODULES /* modprobe exit status on success, -ve on error. Return value * usually useless though. */ extern int request_module(const char * name, ...) __attribute__ ((format (printf, 1, 2))); +#define try_then_request_module(x, mod...) ((x) ?: (request_module(mod), (x))) #else static inline int request_module(const char * name, ...) { return -ENOSYS; } +#define try_then_request_module(x, mod...) (x) #endif -#define try_then_request_module(x, mod...) ((x) ?: (request_module(mod), (x))) struct key; struct file; diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 39e709f88aa0..60f0d418ae32 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -26,7 +26,6 @@ #include <linux/wait.h> #include <asm/atomic.h> -#define KOBJ_NAME_LEN 20 #define UEVENT_HELPER_PATH_LEN 256 #define UEVENT_NUM_ENVP 32 /* number of env pointers */ #define UEVENT_BUFFER_SIZE 2048 /* buffer for the variables */ @@ -59,12 +58,12 @@ enum kobject_action { struct kobject { const char *name; - struct kref kref; struct list_head entry; struct kobject *parent; struct kset *kset; struct kobj_type *ktype; struct sysfs_dirent *sd; + struct kref kref; unsigned int state_initialized:1; unsigned int state_in_sysfs:1; unsigned int state_add_uevent_sent:1; diff --git a/include/linux/libps2.h b/include/linux/libps2.h index f6f301e2b0f5..afc413369101 100644 --- a/include/linux/libps2.h +++ b/include/linux/libps2.h @@ -43,7 +43,6 @@ void ps2_init(struct ps2dev *ps2dev, struct serio *serio); int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout); void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout); int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command); -int ps2_schedule_command(struct ps2dev *ps2dev, unsigned char *param, int command); int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data); int ps2_handle_response(struct ps2dev *ps2dev, unsigned char data); void ps2_cmd_aborted(struct ps2dev *ps2dev); diff --git a/include/linux/module.h b/include/linux/module.h index 3e03b1acbc94..fce15ebd0e1c 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -249,27 +249,30 @@ struct module /* Exported symbols */ const struct kernel_symbol *syms; - unsigned int num_syms; const unsigned long *crcs; + unsigned int num_syms; /* GPL-only exported symbols. */ - const struct kernel_symbol *gpl_syms; unsigned int num_gpl_syms; + const struct kernel_symbol *gpl_syms; const unsigned long *gpl_crcs; +#ifdef CONFIG_UNUSED_SYMBOLS /* unused exported symbols. */ const struct kernel_symbol *unused_syms; - unsigned int num_unused_syms; const unsigned long *unused_crcs; + unsigned int num_unused_syms; + /* GPL-only, unused exported symbols. */ - const struct kernel_symbol *unused_gpl_syms; unsigned int num_unused_gpl_syms; + const struct kernel_symbol *unused_gpl_syms; const unsigned long *unused_gpl_crcs; +#endif /* symbols that will be GPL-only in the near future. */ const struct kernel_symbol *gpl_future_syms; - unsigned int num_gpl_future_syms; const unsigned long *gpl_future_crcs; + unsigned int num_gpl_future_syms; /* Exception table */ unsigned int num_exentries; @@ -285,10 +288,10 @@ struct module void *module_core; /* Here are the sizes of the init and core sections */ - unsigned long init_size, core_size; + unsigned int init_size, core_size; /* The size of the executable code in each section. */ - unsigned long init_text_size, core_text_size; + unsigned int init_text_size, core_text_size; /* The handle returned from unwind_add_table. */ void *unwind_info; @@ -300,29 +303,15 @@ struct module #ifdef CONFIG_GENERIC_BUG /* Support for BUG */ + unsigned num_bugs; struct list_head bug_list; struct bug_entry *bug_table; - unsigned num_bugs; -#endif - -#ifdef CONFIG_MODULE_UNLOAD - /* Reference counts */ - struct module_ref ref[NR_CPUS]; - - /* What modules depend on me? */ - struct list_head modules_which_use_me; - - /* Who is waiting for us to be unloaded */ - struct task_struct *waiter; - - /* Destruction function. */ - void (*exit)(void); #endif #ifdef CONFIG_KALLSYMS /* We keep the symbol and string tables for kallsyms. */ Elf_Sym *symtab; - unsigned long num_symtab; + unsigned int num_symtab; char *strtab; /* Section attributes */ @@ -342,6 +331,21 @@ struct module struct marker *markers; unsigned int num_markers; #endif + +#ifdef CONFIG_MODULE_UNLOAD + /* What modules depend on me? */ + struct list_head modules_which_use_me; + + /* Who is waiting for us to be unloaded */ + struct task_struct *waiter; + + /* Destruction function. */ + void (*exit)(void); + + /* Reference counts */ + struct module_ref ref[NR_CPUS]; +#endif + }; #ifndef MODULE_ARCH_INIT #define MODULE_ARCH_INIT {} diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index a9fae032ba81..9c1d95491f8b 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -189,7 +189,7 @@ typedef union { */ struct map_info { - char *name; + const char *name; unsigned long size; resource_size_t phys; #define NO_XIP (-1UL) diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 245f9098e171..8b5d49133ec6 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -121,7 +121,7 @@ struct mtd_info { u_int32_t oobavail; // Available OOB bytes per block // Kernel-only stuff starts here. - char *name; + const char *name; int index; /* ecc layout structure pointer - read only ! */ diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h index 2ee97e9877a7..67db101d0eb8 100644 --- a/include/linux/of_gpio.h +++ b/include/linux/of_gpio.h @@ -15,7 +15,7 @@ #define __LINUX_OF_GPIO_H #include <linux/errno.h> -#include <asm/gpio.h> +#include <linux/gpio.h> #ifdef CONFIG_OF_GPIO diff --git a/include/linux/raid/bitmap.h b/include/linux/raid/bitmap.h index 78bfdea24a8e..e98900671ca9 100644 --- a/include/linux/raid/bitmap.h +++ b/include/linux/raid/bitmap.h @@ -221,6 +221,7 @@ struct bitmap { unsigned long syncchunk; __u64 events_cleared; + int need_sync; /* bitmap spinlock */ spinlock_t lock; diff --git a/include/linux/raid/linear.h b/include/linux/raid/linear.h index ba15469daf11..7e375111d007 100644 --- a/include/linux/raid/linear.h +++ b/include/linux/raid/linear.h @@ -16,7 +16,7 @@ struct linear_private_data struct linear_private_data *prev; /* earlier version */ dev_info_t **hash_table; sector_t hash_spacing; - sector_t array_size; + sector_t array_sectors; int preshift; /* shift before dividing by hash_spacing */ dev_info_t disks[0]; }; diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h index b7386ae9d288..dc0e3fcb9f28 100644 --- a/include/linux/raid/md.h +++ b/include/linux/raid/md.h @@ -95,7 +95,7 @@ extern int sync_page_io(struct block_device *bdev, sector_t sector, int size, struct page *page, int rw); extern void md_do_sync(mddev_t *mddev); extern void md_new_event(mddev_t *mddev); -extern void md_allow_write(mddev_t *mddev); +extern int md_allow_write(mddev_t *mddev); extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev); #endif /* CONFIG_MD */ diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h index 3dea9f545c8f..9f2549ac0e2d 100644 --- a/include/linux/raid/md_k.h +++ b/include/linux/raid/md_k.h @@ -59,7 +59,7 @@ struct mdk_rdev_s int sb_loaded; __u64 sb_events; sector_t data_offset; /* start of data in array */ - sector_t sb_offset; + sector_t sb_start; /* offset of the super block (in 512byte sectors) */ int sb_size; /* bytes in the superblock */ int preferred_minor; /* autorun support */ @@ -87,6 +87,9 @@ struct mdk_rdev_s #define Blocked 8 /* An error occured on an externally * managed array, don't allow writes * until it is cleared */ +#define StateChanged 9 /* Faulty or Blocked has changed during + * interrupt, so it needs to be + * notified by the thread */ wait_queue_head_t blocked_wait; int desc_nr; /* descriptor index in the superblock */ @@ -147,7 +150,7 @@ struct mddev_s int raid_disks; int max_disks; sector_t size; /* used size of component devices */ - sector_t array_size; /* exported array size */ + sector_t array_sectors; /* exported array size */ __u64 events; char uuid[16]; @@ -188,6 +191,7 @@ struct mddev_s * NEEDED: we might need to start a resync/recover * RUNNING: a thread is running, or about to be started * SYNC: actually doing a resync, not a recovery + * RECOVER: doing recovery, or need to try it. * INTR: resync needs to be aborted for some reason * DONE: thread is done and is waiting to be reaped * REQUEST: user-space has requested a sync (used with SYNC) @@ -198,6 +202,7 @@ struct mddev_s */ #define MD_RECOVERY_RUNNING 0 #define MD_RECOVERY_SYNC 1 +#define MD_RECOVERY_RECOVER 2 #define MD_RECOVERY_INTR 3 #define MD_RECOVERY_DONE 4 #define MD_RECOVERY_NEEDED 5 @@ -210,7 +215,8 @@ struct mddev_s int in_sync; /* know to not need resync */ struct mutex reconfig_mutex; - atomic_t active; + atomic_t active; /* general refcount */ + atomic_t openers; /* number of active opens */ int changed; /* true if we might need to reread partition info */ int degraded; /* whether md should consider @@ -227,6 +233,8 @@ struct mddev_s atomic_t recovery_active; /* blocks scheduled, but not written */ wait_queue_head_t recovery_wait; sector_t recovery_cp; + sector_t resync_min; /* user requested sync + * starts here */ sector_t resync_max; /* resync should pause * when it gets here */ @@ -331,6 +339,9 @@ static inline char * mdname (mddev_t * mddev) #define rdev_for_each(rdev, tmp, mddev) \ rdev_for_each_list(rdev, tmp, (mddev)->disks) +#define rdev_for_each_rcu(rdev, mddev) \ + list_for_each_entry_rcu(rdev, &((mddev)->disks), same_set) + typedef struct mdk_thread_s { void (*run) (mddev_t *mddev); mddev_t *mddev; diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h index 3f2cd98c508b..8b4de4a41ff1 100644 --- a/include/linux/raid/md_p.h +++ b/include/linux/raid/md_p.h @@ -43,14 +43,11 @@ */ #define MD_RESERVED_BYTES (64 * 1024) #define MD_RESERVED_SECTORS (MD_RESERVED_BYTES / 512) -#define MD_RESERVED_BLOCKS (MD_RESERVED_BYTES / BLOCK_SIZE) #define MD_NEW_SIZE_SECTORS(x) ((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS) -#define MD_NEW_SIZE_BLOCKS(x) ((x & ~(MD_RESERVED_BLOCKS - 1)) - MD_RESERVED_BLOCKS) #define MD_SB_BYTES 4096 #define MD_SB_WORDS (MD_SB_BYTES / 4) -#define MD_SB_BLOCKS (MD_SB_BYTES / BLOCK_SIZE) #define MD_SB_SECTORS (MD_SB_BYTES / 512) /* diff --git a/include/linux/raid/raid5.h b/include/linux/raid/raid5.h index f0827d31ae6f..3b2672792457 100644 --- a/include/linux/raid/raid5.h +++ b/include/linux/raid/raid5.h @@ -158,6 +158,43 @@ * the compute block completes. */ +/* + * Operations state - intermediate states that are visible outside of sh->lock + * In general _idle indicates nothing is running, _run indicates a data + * processing operation is active, and _result means the data processing result + * is stable and can be acted upon. For simple operations like biofill and + * compute that only have an _idle and _run state they are indicated with + * sh->state flags (STRIPE_BIOFILL_RUN and STRIPE_COMPUTE_RUN) + */ +/** + * enum check_states - handles syncing / repairing a stripe + * @check_state_idle - check operations are quiesced + * @check_state_run - check operation is running + * @check_state_result - set outside lock when check result is valid + * @check_state_compute_run - check failed and we are repairing + * @check_state_compute_result - set outside lock when compute result is valid + */ +enum check_states { + check_state_idle = 0, + check_state_run, /* parity check */ + check_state_check_result, + check_state_compute_run, /* parity repair */ + check_state_compute_result, +}; + +/** + * enum reconstruct_states - handles writing or expanding a stripe + */ +enum reconstruct_states { + reconstruct_state_idle = 0, + reconstruct_state_prexor_drain_run, /* prexor-write */ + reconstruct_state_drain_run, /* write */ + reconstruct_state_run, /* expand */ + reconstruct_state_prexor_drain_result, + reconstruct_state_drain_result, + reconstruct_state_result, +}; + struct stripe_head { struct hlist_node hash; struct list_head lru; /* inactive_list or handle_list */ @@ -169,19 +206,13 @@ struct stripe_head { spinlock_t lock; int bm_seq; /* sequence number for bitmap flushes */ int disks; /* disks in stripe */ + enum check_states check_state; + enum reconstruct_states reconstruct_state; /* stripe_operations - * @pending - pending ops flags (set for request->issue->complete) - * @ack - submitted ops flags (set for issue->complete) - * @complete - completed ops flags (set for complete) * @target - STRIPE_OP_COMPUTE_BLK target - * @count - raid5_runs_ops is set to run when this is non-zero */ struct stripe_operations { - unsigned long pending; - unsigned long ack; - unsigned long complete; int target; - int count; u32 zero_sum_result; } ops; struct r5dev { @@ -202,6 +233,7 @@ struct stripe_head_state { int locked, uptodate, to_read, to_write, failed, written; int to_fill, compute, req_compute, non_overwrite; int failed_num; + unsigned long ops_request; }; /* r6_state - extra state data only relevant to r6 */ @@ -228,9 +260,7 @@ struct r6_state { #define R5_Wantfill 12 /* dev->toread contains a bio that needs * filling */ -#define R5_Wantprexor 13 /* distinguish blocks ready for rmw from - * other "towrites" - */ +#define R5_Wantdrain 13 /* dev->towrite needs to be drained */ /* * Write method */ @@ -254,8 +284,10 @@ struct r6_state { #define STRIPE_EXPAND_READY 11 #define STRIPE_IO_STARTED 12 /* do not count towards 'bypass_count' */ #define STRIPE_FULL_WRITE 13 /* all blocks are set to be overwritten */ +#define STRIPE_BIOFILL_RUN 14 +#define STRIPE_COMPUTE_RUN 15 /* - * Operations flags (in issue order) + * Operation request flags */ #define STRIPE_OP_BIOFILL 0 #define STRIPE_OP_COMPUTE_BLK 1 @@ -263,14 +295,6 @@ struct r6_state { #define STRIPE_OP_BIODRAIN 3 #define STRIPE_OP_POSTXOR 4 #define STRIPE_OP_CHECK 5 -#define STRIPE_OP_IO 6 - -/* modifiers to the base operations - * STRIPE_OP_MOD_REPAIR_PD - compute the parity block and write it back - * STRIPE_OP_MOD_DMA_CHECK - parity is not corrupted by the check - */ -#define STRIPE_OP_MOD_REPAIR_PD 7 -#define STRIPE_OP_MOD_DMA_CHECK 8 /* * Plugging: diff --git a/include/linux/serio.h b/include/linux/serio.h index 95674d97dabd..e72716cca577 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -175,7 +175,7 @@ static inline void serio_unpin_driver(struct serio *serio) #define SERIO_8042_XL 0x06 /* - * Serio types + * Serio protocols */ #define SERIO_UNKNOWN 0x00 #define SERIO_MSC 0x01 @@ -212,5 +212,7 @@ static inline void serio_unpin_driver(struct serio *serio) #define SERIO_TAOSEVM 0x34 #define SERIO_FUJITSU 0x35 #define SERIO_ZHENHUA 0x36 +#define SERIO_INEXIO 0x37 +#define SERIO_TOUCHIT213 0x37 #endif diff --git a/include/linux/spi/max7301.h b/include/linux/spi/max7301.h new file mode 100644 index 000000000000..6dfd83f19b4b --- /dev/null +++ b/include/linux/spi/max7301.h @@ -0,0 +1,9 @@ +#ifndef LINUX_SPI_MAX7301_H +#define LINUX_SPI_MAX7301_H + +struct max7301_platform_data { + /* number assigned to the first GPIO */ + unsigned base; +}; + +#endif diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 387e428f1cdf..b9a76c972084 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -733,7 +733,7 @@ struct spi_board_info { * controller_data goes to spi_device.controller_data, * irq is copied too */ - char modalias[KOBJ_NAME_LEN]; + char modalias[32]; const void *platform_data; void *controller_data; int irq; diff --git a/include/linux/synclink.h b/include/linux/synclink.h index 45f6bc82d317..c844a229acc9 100644 --- a/include/linux/synclink.h +++ b/include/linux/synclink.h @@ -136,6 +136,7 @@ #define MGSL_INTERFACE_RTS_EN 0x10 #define MGSL_INTERFACE_LL 0x20 #define MGSL_INTERFACE_RL 0x40 +#define MGSL_INTERFACE_MSB_FIRST 0x80 typedef struct _MGSL_PARAMS { diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h index f2767bc6b735..f395bb3fa2f2 100644 --- a/include/linux/sysdev.h +++ b/include/linux/sysdev.h @@ -99,8 +99,9 @@ extern void sysdev_unregister(struct sys_device *); struct sysdev_attribute { struct attribute attr; - ssize_t (*show)(struct sys_device *, char *); - ssize_t (*store)(struct sys_device *, const char *, size_t); + ssize_t (*show)(struct sys_device *, struct sysdev_attribute *, char *); + ssize_t (*store)(struct sys_device *, struct sysdev_attribute *, + const char *, size_t); }; @@ -118,4 +119,38 @@ struct sysdev_attribute { extern int sysdev_create_file(struct sys_device *, struct sysdev_attribute *); extern void sysdev_remove_file(struct sys_device *, struct sysdev_attribute *); +struct sysdev_ext_attribute { + struct sysdev_attribute attr; + void *var; +}; + +/* + * Support for simple variable sysdev attributes. + * The pointer to the variable is stored in a sysdev_ext_attribute + */ + +/* Add more types as needed */ + +extern ssize_t sysdev_show_ulong(struct sys_device *, struct sysdev_attribute *, + char *); +extern ssize_t sysdev_store_ulong(struct sys_device *, + struct sysdev_attribute *, const char *, size_t); +extern ssize_t sysdev_show_int(struct sys_device *, struct sysdev_attribute *, + char *); +extern ssize_t sysdev_store_int(struct sys_device *, + struct sysdev_attribute *, const char *, size_t); + +#define _SYSDEV_ULONG_ATTR(_name, _mode, _var) \ + { _SYSDEV_ATTR(_name, _mode, sysdev_show_ulong, sysdev_store_ulong), \ + &(_var) } +#define SYSDEV_ULONG_ATTR(_name, _mode, _var) \ + struct sysdev_ext_attribute attr_##_name = \ + _SYSDEV_ULONG_ATTR(_name, _mode, _var); +#define _SYSDEV_INT_ATTR(_name, _mode, _var) \ + { _SYSDEV_ATTR(_name, _mode, sysdev_show_int, sysdev_store_int), \ + &(_var) } +#define SYSDEV_INT_ATTR(_name, _mode, _var) \ + struct sysdev_ext_attribute attr_##_name = \ + _SYSDEV_INT_ATTR(_name, _mode, _var); + #endif /* _SYSDEV_H_ */ diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 7858eac40aa7..37fa24152bd8 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -101,6 +101,9 @@ void sysfs_remove_bin_file(struct kobject *kobj, struct bin_attribute *attr); int __must_check sysfs_create_link(struct kobject *kobj, struct kobject *target, const char *name); +int __must_check sysfs_create_link_nowarn(struct kobject *kobj, + struct kobject *target, + const char *name); void sysfs_remove_link(struct kobject *kobj, const char *name); int __must_check sysfs_create_group(struct kobject *kobj, @@ -180,6 +183,13 @@ static inline int sysfs_create_link(struct kobject *kobj, return 0; } +static inline int sysfs_create_link_nowarn(struct kobject *kobj, + struct kobject *target, + const char *name) +{ + return 0; +} + static inline void sysfs_remove_link(struct kobject *kobj, const char *name) { } diff --git a/include/linux/tty.h b/include/linux/tty.h index 4e5833073aa6..e3579cb086e0 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -317,8 +317,6 @@ extern void tty_wait_until_sent(struct tty_struct *tty, long timeout); extern int tty_check_change(struct tty_struct *tty); extern void stop_tty(struct tty_struct *tty); extern void start_tty(struct tty_struct *tty); -extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc); -extern int tty_unregister_ldisc(int disc); extern int tty_register_driver(struct tty_driver *driver); extern int tty_unregister_driver(struct tty_driver *driver); extern struct device *tty_register_device(struct tty_driver *driver, @@ -383,6 +381,15 @@ extern void tty_port_init(struct tty_port *port); extern int tty_port_alloc_xmit_buf(struct tty_port *port); extern void tty_port_free_xmit_buf(struct tty_port *port); +extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc); +extern int tty_unregister_ldisc(int disc); +extern int tty_set_ldisc(struct tty_struct *tty, int ldisc); +extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty); +extern void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty); +extern void tty_ldisc_init(struct tty_struct *tty); +extern void tty_ldisc_begin(void); +/* This last one is just for the tty layer internals and shouldn't be used elsewhere */ +extern void tty_ldisc_enable(struct tty_struct *tty); /* n_tty.c */ diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index d2a003586761..e1065ac0d922 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -135,7 +135,7 @@ * * Optional: * - * void (*break_ctl)(struct tty_stuct *tty, int state); + * int (*break_ctl)(struct tty_stuct *tty, int state); * * This optional routine requests the tty driver to turn on or * off BREAK status on the RS-232 port. If state is -1, @@ -146,6 +146,10 @@ * handle the following ioctls: TCSBRK, TCSBRKP, TIOCSBRK, * TIOCCBRK. * + * If the driver sets TTY_DRIVER_HARDWARE_BREAK then the interface + * will also be called with actual times and the hardware is expected + * to do the delay work itself. 0 and -1 are still used for on/off. + * * Optional: Required for TCSBRK/BRKP/etc handling. * * void (*wait_until_sent)(struct tty_struct *tty, int timeout); @@ -192,7 +196,7 @@ struct tty_operations { void (*stop)(struct tty_struct *tty); void (*start)(struct tty_struct *tty); void (*hangup)(struct tty_struct *tty); - void (*break_ctl)(struct tty_struct *tty, int state); + int (*break_ctl)(struct tty_struct *tty, int state); void (*flush_buffer)(struct tty_struct *tty); void (*set_ldisc)(struct tty_struct *tty); void (*wait_until_sent)(struct tty_struct *tty, int timeout); @@ -285,12 +289,18 @@ extern struct tty_driver *tty_find_polling_driver(char *name, int *line); * TTY_DRIVER_DEVPTS_MEM -- don't use the standard arrays, instead * use dynamic memory keyed through the devpts filesystem. This * is only applicable to the pty driver. + * + * TTY_DRIVER_HARDWARE_BREAK -- hardware handles break signals. Pass + * the requested timeout to the caller instead of using a simple + * on/off interface. + * */ #define TTY_DRIVER_INSTALLED 0x0001 #define TTY_DRIVER_RESET_TERMIOS 0x0002 #define TTY_DRIVER_REAL_RAW 0x0004 #define TTY_DRIVER_DYNAMIC_DEV 0x0008 #define TTY_DRIVER_DEVPTS_MEM 0x0010 +#define TTY_DRIVER_HARDWARE_BREAK 0x0020 /* tty driver types */ #define TTY_DRIVER_TYPE_SYSTEM 0x0001 diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h index 973386d439da..cdf338d94b7f 100644 --- a/include/linux/uio_driver.h +++ b/include/linux/uio_driver.h @@ -36,7 +36,7 @@ struct uio_mem { struct uio_map *map; }; -#define MAX_UIO_MAPS 5 +#define MAX_UIO_MAPS 5 struct uio_device; @@ -53,6 +53,7 @@ struct uio_device; * @mmap: mmap operation for this uio device * @open: open operation for this uio device * @release: release operation for this uio device + * @irqcontrol: disable/enable irqs when 0/1 is written to /dev/uioX */ struct uio_info { struct uio_device *uio_dev; @@ -66,6 +67,7 @@ struct uio_info { int (*mmap)(struct uio_info *info, struct vm_area_struct *vma); int (*open)(struct uio_info *info, struct inode *inode); int (*release)(struct uio_info *info, struct inode *inode); + int (*irqcontrol)(struct uio_info *info, s32 irq_on); }; extern int __must_check @@ -80,11 +82,11 @@ static inline int __must_check extern void uio_unregister_device(struct uio_info *info); extern void uio_event_notify(struct uio_info *info); -/* defines for uio_device->irq */ +/* defines for uio_info->irq */ #define UIO_IRQ_CUSTOM -1 #define UIO_IRQ_NONE -2 -/* defines for uio_device->memtype */ +/* defines for uio_mem->memtype */ #define UIO_MEM_NONE 0 #define UIO_MEM_PHYS 1 #define UIO_MEM_LOGICAL 2 diff --git a/include/linux/usb.h b/include/linux/usb.h index c08689ea9b4b..5811c5da69f9 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -160,6 +160,7 @@ struct usb_interface { unsigned is_active:1; /* the interface is not suspended */ unsigned sysfs_files_created:1; /* the sysfs attributes exist */ unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */ + unsigned needs_binding:1; /* needs delayed unbind/rebind */ struct device dev; /* interface specific device info */ struct device *usb_dev; @@ -293,7 +294,7 @@ struct usb_devmap { struct usb_bus { struct device *controller; /* host/master side hardware */ int busnum; /* Bus number (in order of reg) */ - char *bus_name; /* stable id (PCI slot_name etc) */ + const char *bus_name; /* stable id (PCI slot_name etc) */ u8 uses_dma; /* Does the host controller use DMA? */ u8 otg_port; /* 0, or number of OTG/HNP port */ unsigned is_b_host:1; /* true during some HNP roleswitches */ @@ -497,8 +498,6 @@ extern int usb_lock_device_for_reset(struct usb_device *udev, /* USB port reset for device reinitialization */ extern int usb_reset_device(struct usb_device *dev); -extern int usb_reset_composite_device(struct usb_device *dev, - struct usb_interface *iface); extern struct usb_device *usb_find_device(u16 vendor_id, u16 product_id); @@ -958,9 +957,9 @@ struct usbdrv_wrap { * @resume: Called when the device is being resumed by the system. * @reset_resume: Called when the suspended device has been reset instead * of being resumed. - * @pre_reset: Called by usb_reset_composite_device() when the device + * @pre_reset: Called by usb_reset_device() when the device * is about to be reset. - * @post_reset: Called by usb_reset_composite_device() after the device + * @post_reset: Called by usb_reset_device() after the device * has been reset * @id_table: USB drivers use ID table to support hotplugging. * Export this with MODULE_DEVICE_TABLE(usb,...). This must be set @@ -972,6 +971,8 @@ struct usbdrv_wrap { * added to this driver by preventing the sysfs file from being created. * @supports_autosuspend: if set to 0, the USB core will not allow autosuspend * for interfaces bound to this driver. + * @soft_unbind: if set to 1, the USB core will not kill URBs and disable + * endpoints before calling the driver's disconnect method. * * USB interface drivers must provide a name, probe() and disconnect() * methods, and an id_table. Other driver fields are optional. @@ -1012,6 +1013,7 @@ struct usb_driver { struct usbdrv_wrap drvwrap; unsigned int no_dynamic_id:1; unsigned int supports_autosuspend:1; + unsigned int soft_unbind:1; }; #define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver) diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h new file mode 100644 index 000000000000..747c3a49cdc9 --- /dev/null +++ b/include/linux/usb/composite.h @@ -0,0 +1,338 @@ +/* + * composite.h -- framework for usb gadgets which are composite devices + * + * Copyright (C) 2006-2008 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __LINUX_USB_COMPOSITE_H +#define __LINUX_USB_COMPOSITE_H + +/* + * This framework is an optional layer on top of the USB Gadget interface, + * making it easier to build (a) Composite devices, supporting multiple + * functions within any single configuration, and (b) Multi-configuration + * devices, also supporting multiple functions but without necessarily + * having more than one function per configuration. + * + * Example: a device with a single configuration supporting both network + * link and mass storage functions is a composite device. Those functions + * might alternatively be packaged in individual configurations, but in + * the composite model the host can use both functions at the same time. + */ + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + + +struct usb_configuration; + +/** + * struct usb_function - describes one function of a configuration + * @name: For diagnostics, identifies the function. + * @strings: tables of strings, keyed by identifiers assigned during bind() + * and by language IDs provided in control requests + * @descriptors: Table of full (or low) speed descriptors, using interface and + * string identifiers assigned during @bind(). If this pointer is null, + * the function will not be available at full speed (or at low speed). + * @hs_descriptors: Table of high speed descriptors, using interface and + * string identifiers assigned during @bind(). If this pointer is null, + * the function will not be available at high speed. + * @config: assigned when @usb_add_function() is called; this is the + * configuration with which this function is associated. + * @bind: Before the gadget can register, all of its functions bind() to the + * available resources including string and interface identifiers used + * in interface or class descriptors; endpoints; I/O buffers; and so on. + * @unbind: Reverses @bind; called as a side effect of unregistering the + * driver which added this function. + * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may + * initialize usb_ep.driver data at this time (when it is used). + * Note that setting an interface to its current altsetting resets + * interface state, and that all interfaces have a disabled state. + * @get_alt: Returns the active altsetting. If this is not provided, + * then only altsetting zero is supported. + * @disable: (REQUIRED) Indicates the function should be disabled. Reasons + * include host resetting or reconfiguring the gadget, and disconnection. + * @setup: Used for interface-specific control requests. + * @suspend: Notifies functions when the host stops sending USB traffic. + * @resume: Notifies functions when the host restarts USB traffic. + * + * A single USB function uses one or more interfaces, and should in most + * cases support operation at both full and high speeds. Each function is + * associated by @usb_add_function() with a one configuration; that function + * causes @bind() to be called so resources can be allocated as part of + * setting up a gadget driver. Those resources include endpoints, which + * should be allocated using @usb_ep_autoconfig(). + * + * To support dual speed operation, a function driver provides descriptors + * for both high and full speed operation. Except in rare cases that don't + * involve bulk endpoints, each speed needs different endpoint descriptors. + * + * Function drivers choose their own strategies for managing instance data. + * The simplest strategy just declares it "static', which means the function + * can only be activated once. If the function needs to be exposed in more + * than one configuration at a given speed, it needs to support multiple + * usb_function structures (one for each configuration). + * + * A more complex strategy might encapsulate a @usb_function structure inside + * a driver-specific instance structure to allows multiple activations. An + * example of multiple activations might be a CDC ACM function that supports + * two or more distinct instances within the same configuration, providing + * several independent logical data links to a USB host. + */ +struct usb_function { + const char *name; + struct usb_gadget_strings **strings; + struct usb_descriptor_header **descriptors; + struct usb_descriptor_header **hs_descriptors; + + struct usb_configuration *config; + + /* REVISIT: bind() functions can be marked __init, which + * makes trouble for section mismatch analysis. See if + * we can't restructure things to avoid mismatching. + * Related: unbind() may kfree() but bind() won't... + */ + + /* configuration management: bind/unbind */ + int (*bind)(struct usb_configuration *, + struct usb_function *); + void (*unbind)(struct usb_configuration *, + struct usb_function *); + + /* runtime state management */ + int (*set_alt)(struct usb_function *, + unsigned interface, unsigned alt); + int (*get_alt)(struct usb_function *, + unsigned interface); + void (*disable)(struct usb_function *); + int (*setup)(struct usb_function *, + const struct usb_ctrlrequest *); + void (*suspend)(struct usb_function *); + void (*resume)(struct usb_function *); + + /* internals */ + struct list_head list; +}; + +int usb_add_function(struct usb_configuration *, struct usb_function *); + +int usb_interface_id(struct usb_configuration *, struct usb_function *); + +/** + * ep_choose - select descriptor endpoint at current device speed + * @g: gadget, connected and running at some speed + * @hs: descriptor to use for high speed operation + * @fs: descriptor to use for full or low speed operation + */ +static inline struct usb_endpoint_descriptor * +ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs, + struct usb_endpoint_descriptor *fs) +{ + if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + return hs; + return fs; +} + +#define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */ + +/** + * struct usb_configuration - represents one gadget configuration + * @label: For diagnostics, describes the configuration. + * @strings: Tables of strings, keyed by identifiers assigned during @bind() + * and by language IDs provided in control requests. + * @descriptors: Table of descriptors preceding all function descriptors. + * Examples include OTG and vendor-specific descriptors. + * @bind: Called from @usb_add_config() to allocate resources unique to this + * configuration and to call @usb_add_function() for each function used. + * @unbind: Reverses @bind; called as a side effect of unregistering the + * driver which added this configuration. + * @setup: Used to delegate control requests that aren't handled by standard + * device infrastructure or directed at a specific interface. + * @bConfigurationValue: Copied into configuration descriptor. + * @iConfiguration: Copied into configuration descriptor. + * @bmAttributes: Copied into configuration descriptor. + * @bMaxPower: Copied into configuration descriptor. + * @cdev: assigned by @usb_add_config() before calling @bind(); this is + * the device associated with this configuration. + * + * Configurations are building blocks for gadget drivers structured around + * function drivers. Simple USB gadgets require only one function and one + * configuration, and handle dual-speed hardware by always providing the same + * functionality. Slightly more complex gadgets may have more than one + * single-function configuration at a given speed; or have configurations + * that only work at one speed. + * + * Composite devices are, by definition, ones with configurations which + * include more than one function. + * + * The lifecycle of a usb_configuration includes allocation, initialization + * of the fields described above, and calling @usb_add_config() to set up + * internal data and bind it to a specific device. The configuration's + * @bind() method is then used to initialize all the functions and then + * call @usb_add_function() for them. + * + * Those functions would normally be independant of each other, but that's + * not mandatory. CDC WMC devices are an example where functions often + * depend on other functions, with some functions subsidiary to others. + * Such interdependency may be managed in any way, so long as all of the + * descriptors complete by the time the composite driver returns from + * its bind() routine. + */ +struct usb_configuration { + const char *label; + struct usb_gadget_strings **strings; + const struct usb_descriptor_header **descriptors; + + /* REVISIT: bind() functions can be marked __init, which + * makes trouble for section mismatch analysis. See if + * we can't restructure things to avoid mismatching... + */ + + /* configuration management: bind/unbind */ + int (*bind)(struct usb_configuration *); + void (*unbind)(struct usb_configuration *); + int (*setup)(struct usb_configuration *, + const struct usb_ctrlrequest *); + + /* fields in the config descriptor */ + u8 bConfigurationValue; + u8 iConfiguration; + u8 bmAttributes; + u8 bMaxPower; + + struct usb_composite_dev *cdev; + + /* internals */ + struct list_head list; + struct list_head functions; + u8 next_interface_id; + unsigned highspeed:1; + unsigned fullspeed:1; + struct usb_function *interface[MAX_CONFIG_INTERFACES]; +}; + +int usb_add_config(struct usb_composite_dev *, + struct usb_configuration *); + +/** + * struct usb_composite_driver - groups configurations into a gadget + * @name: For diagnostics, identifies the driver. + * @dev: Template descriptor for the device, including default device + * identifiers. + * @strings: tables of strings, keyed by identifiers assigned during bind() + * and language IDs provided in control requests + * @bind: (REQUIRED) Used to allocate resources that are shared across the + * whole device, such as string IDs, and add its configurations using + * @usb_add_config(). This may fail by returning a negative errno + * value; it should return zero on successful initialization. + * @unbind: Reverses @bind(); called as a side effect of unregistering + * this driver. + * + * Devices default to reporting self powered operation. Devices which rely + * on bus powered operation should report this in their @bind() method. + * + * Before returning from @bind, various fields in the template descriptor + * may be overridden. These include the idVendor/idProduct/bcdDevice values + * normally to bind the appropriate host side driver, and the three strings + * (iManufacturer, iProduct, iSerialNumber) normally used to provide user + * meaningful device identifiers. (The strings will not be defined unless + * they are defined in @dev and @strings.) The correct ep0 maxpacket size + * is also reported, as defined by the underlying controller driver. + */ +struct usb_composite_driver { + const char *name; + const struct usb_device_descriptor *dev; + struct usb_gadget_strings **strings; + + /* REVISIT: bind() functions can be marked __init, which + * makes trouble for section mismatch analysis. See if + * we can't restructure things to avoid mismatching... + */ + + int (*bind)(struct usb_composite_dev *); + int (*unbind)(struct usb_composite_dev *); +}; + +extern int usb_composite_register(struct usb_composite_driver *); +extern void usb_composite_unregister(struct usb_composite_driver *); + + +/** + * struct usb_composite_device - represents one composite usb gadget + * @gadget: read-only, abstracts the gadget's usb peripheral controller + * @req: used for control responses; buffer is pre-allocated + * @bufsiz: size of buffer pre-allocated in @req + * @config: the currently active configuration + * + * One of these devices is allocated and initialized before the + * associated device driver's bind() is called. + * + * OPEN ISSUE: it appears that some WUSB devices will need to be + * built by combining a normal (wired) gadget with a wireless one. + * This revision of the gadget framework should probably try to make + * sure doing that won't hurt too much. + * + * One notion for how to handle Wireless USB devices involves: + * (a) a second gadget here, discovery mechanism TBD, but likely + * needing separate "register/unregister WUSB gadget" calls; + * (b) updates to usb_gadget to include flags "is it wireless", + * "is it wired", plus (presumably in a wrapper structure) + * bandgroup and PHY info; + * (c) presumably a wireless_ep wrapping a usb_ep, and reporting + * wireless-specific parameters like maxburst and maxsequence; + * (d) configurations that are specific to wireless links; + * (e) function drivers that understand wireless configs and will + * support wireless for (additional) function instances; + * (f) a function to support association setup (like CBAF), not + * necessarily requiring a wireless adapter; + * (g) composite device setup that can create one or more wireless + * configs, including appropriate association setup support; + * (h) more, TBD. + */ +struct usb_composite_dev { + struct usb_gadget *gadget; + struct usb_request *req; + unsigned bufsiz; + + struct usb_configuration *config; + + /* internals */ + struct usb_device_descriptor desc; + struct list_head configs; + struct usb_composite_driver *driver; + u8 next_string_id; + + spinlock_t lock; + + /* REVISIT use and existence of lock ... */ +}; + +extern int usb_string_id(struct usb_composite_dev *c); + +/* messaging utils */ +#define DBG(d, fmt, args...) \ + dev_dbg(&(d)->gadget->dev , fmt , ## args) +#define VDBG(d, fmt, args...) \ + dev_vdbg(&(d)->gadget->dev , fmt , ## args) +#define ERROR(d, fmt, args...) \ + dev_err(&(d)->gadget->dev , fmt , ## args) +#define WARN(d, fmt, args...) \ + dev_warn(&(d)->gadget->dev , fmt , ## args) +#define INFO(d, fmt, args...) \ + dev_info(&(d)->gadget->dev , fmt , ## args) + +#endif /* __LINUX_USB_COMPOSITE_H */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index cf468fbdbf8e..0460a746480c 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -33,7 +33,8 @@ struct usb_ep; * @short_not_ok: When reading data, makes short packets be * treated as errors (queue stops advancing till cleanup). * @complete: Function called when request completes, so this request and - * its buffer may be re-used. + * its buffer may be re-used. The function will always be called with + * interrupts disabled, and it must not sleep. * Reads terminate with a short packet, or when the buffer fills, * whichever comes first. When writes terminate, some data bytes * will usually still be in flight (often in a hardware fifo). @@ -271,7 +272,10 @@ static inline void usb_ep_free_request(struct usb_ep *ep, * (Note that some USB device controllers disallow protocol stall responses * in some cases.) When control responses are deferred (the response is * written after the setup callback returns), then usb_ep_set_halt() may be - * used on ep0 to trigger protocol stalls. + * used on ep0 to trigger protocol stalls. Depending on the controller, + * it may not be possible to trigger a status-stage protocol stall when the + * data stage is over, that is, from within the response's completion + * routine. * * For periodic endpoints, like interrupt or isochronous ones, the usb host * arranges to poll once per interval, and the gadget driver usually will @@ -858,6 +862,25 @@ int usb_descriptor_fillbuf(void *, unsigned, int usb_gadget_config_buf(const struct usb_config_descriptor *config, void *buf, unsigned buflen, const struct usb_descriptor_header **desc); +/* copy a NULL-terminated vector of descriptors */ +struct usb_descriptor_header **usb_copy_descriptors( + struct usb_descriptor_header **); + +/* return copy of endpoint descriptor given original descriptor set */ +struct usb_endpoint_descriptor *usb_find_endpoint( + struct usb_descriptor_header **src, + struct usb_descriptor_header **copy, + struct usb_endpoint_descriptor *match); + +/** + * usb_free_descriptors - free descriptors returned by usb_copy_descriptors() + * @v: vector of descriptors + */ +static inline void usb_free_descriptors(struct usb_descriptor_header **v) +{ + kfree(v); +} + /*-------------------------------------------------------------------------*/ /* utility wrapping a simple endpoint selection policy */ diff --git a/include/linux/usb/irda.h b/include/linux/usb/irda.h new file mode 100644 index 000000000000..e345ceaf72d6 --- /dev/null +++ b/include/linux/usb/irda.h @@ -0,0 +1,151 @@ +/* + * USB IrDA Bridge Device Definition + */ + +#ifndef __LINUX_USB_IRDA_H +#define __LINUX_USB_IRDA_H + +/* This device should use Application-specific class */ + +#define USB_SUBCLASS_IRDA 0x02 + +/*-------------------------------------------------------------------------*/ + +/* Class-Specific requests (bRequest field) */ + +#define USB_REQ_CS_IRDA_RECEIVING 1 +#define USB_REQ_CS_IRDA_CHECK_MEDIA_BUSY 3 +#define USB_REQ_CS_IRDA_RATE_SNIFF 4 +#define USB_REQ_CS_IRDA_UNICAST_LIST 5 +#define USB_REQ_CS_IRDA_GET_CLASS_DESC 6 + +/*-------------------------------------------------------------------------*/ + +/* Class-Specific descriptor */ + +#define USB_DT_CS_IRDA 0x21 + +/*-------------------------------------------------------------------------*/ + +/* Data sizes */ + +#define USB_IRDA_DS_2048 (1 << 5) +#define USB_IRDA_DS_1024 (1 << 4) +#define USB_IRDA_DS_512 (1 << 3) +#define USB_IRDA_DS_256 (1 << 2) +#define USB_IRDA_DS_128 (1 << 1) +#define USB_IRDA_DS_64 (1 << 0) + +/* Window sizes */ + +#define USB_IRDA_WS_7 (1 << 6) +#define USB_IRDA_WS_6 (1 << 5) +#define USB_IRDA_WS_5 (1 << 4) +#define USB_IRDA_WS_4 (1 << 3) +#define USB_IRDA_WS_3 (1 << 2) +#define USB_IRDA_WS_2 (1 << 1) +#define USB_IRDA_WS_1 (1 << 0) + +/* Min turnaround times in usecs */ + +#define USB_IRDA_MTT_0 (1 << 7) +#define USB_IRDA_MTT_10 (1 << 6) +#define USB_IRDA_MTT_50 (1 << 5) +#define USB_IRDA_MTT_100 (1 << 4) +#define USB_IRDA_MTT_500 (1 << 3) +#define USB_IRDA_MTT_1000 (1 << 2) +#define USB_IRDA_MTT_5000 (1 << 1) +#define USB_IRDA_MTT_10000 (1 << 0) + +/* Baud rates */ + +#define USB_IRDA_BR_4000000 (1 << 8) +#define USB_IRDA_BR_1152000 (1 << 7) +#define USB_IRDA_BR_576000 (1 << 6) +#define USB_IRDA_BR_115200 (1 << 5) +#define USB_IRDA_BR_57600 (1 << 4) +#define USB_IRDA_BR_38400 (1 << 3) +#define USB_IRDA_BR_19200 (1 << 2) +#define USB_IRDA_BR_9600 (1 << 1) +#define USB_IRDA_BR_2400 (1 << 0) + +/* Additional BOFs */ + +#define USB_IRDA_AB_0 (1 << 7) +#define USB_IRDA_AB_1 (1 << 6) +#define USB_IRDA_AB_2 (1 << 5) +#define USB_IRDA_AB_3 (1 << 4) +#define USB_IRDA_AB_6 (1 << 3) +#define USB_IRDA_AB_12 (1 << 2) +#define USB_IRDA_AB_24 (1 << 1) +#define USB_IRDA_AB_48 (1 << 0) + +/* IRDA Rate Sniff */ + +#define USB_IRDA_RATE_SNIFF 1 + +/*-------------------------------------------------------------------------*/ + +struct usb_irda_cs_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdSpecRevision; + __u8 bmDataSize; + __u8 bmWindowSize; + __u8 bmMinTurnaroundTime; + __le16 wBaudRate; + __u8 bmAdditionalBOFs; + __u8 bIrdaRateSniff; + __u8 bMaxUnicastList; +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* Data Format */ + +#define USB_IRDA_STATUS_MEDIA_BUSY (1 << 7) + +/* The following is a 4-bit value used for both + * inbound and outbound headers: + * + * 0 - speed ignored + * 1 - 2400 bps + * 2 - 9600 bps + * 3 - 19200 bps + * 4 - 38400 bps + * 5 - 57600 bps + * 6 - 115200 bps + * 7 - 576000 bps + * 8 - 1.152 Mbps + * 9 - 5 mbps + * 10..15 - Reserved + */ +#define USB_IRDA_STATUS_LINK_SPEED 0x0f + +/* The following is a 4-bit value used only for + * outbound header: + * + * 0 - No change (BOF ignored) + * 1 - 48 BOFs + * 2 - 24 BOFs + * 3 - 12 BOFs + * 4 - 6 BOFs + * 5 - 3 BOFs + * 6 - 2 BOFs + * 7 - 1 BOFs + * 8 - 0 BOFs + * 9..15 - Reserved + */ +#define USB_IRDA_EXTRA_BOFS 0xf0 + +struct usb_irda_inbound_header { + __u8 bmStatus; +}; + +struct usb_irda_outbound_header { + __u8 bmChange; +}; + +#endif /* __LINUX_USB_IRDA_H */ + diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 8f891cbaf9ab..09a3e6a7518f 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -62,7 +62,7 @@ */ struct usb_serial_port { struct usb_serial *serial; - struct tty_struct *tty; + struct tty_port port; spinlock_t lock; struct mutex mutex; unsigned char number; @@ -89,7 +89,6 @@ struct usb_serial_port { wait_queue_head_t write_wait; struct work_struct work; - int open_count; char throttled; char throttle_req; char console; @@ -217,22 +216,27 @@ struct usb_serial_driver { int (*resume)(struct usb_serial *serial); /* serial function calls */ - int (*open)(struct usb_serial_port *port, struct file *filp); - void (*close)(struct usb_serial_port *port, struct file *filp); - int (*write)(struct usb_serial_port *port, const unsigned char *buf, - int count); - int (*write_room)(struct usb_serial_port *port); - int (*ioctl)(struct usb_serial_port *port, struct file *file, + /* Called by console with tty = NULL and by tty */ + int (*open)(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); + void (*close)(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); + int (*write)(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); + /* Called only by the tty layer */ + int (*write_room)(struct tty_struct *tty); + int (*ioctl)(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); - void (*set_termios)(struct usb_serial_port *port, struct ktermios *old); - void (*break_ctl)(struct usb_serial_port *port, int break_state); - int (*chars_in_buffer)(struct usb_serial_port *port); - void (*throttle)(struct usb_serial_port *port); - void (*unthrottle)(struct usb_serial_port *port); - int (*tiocmget)(struct usb_serial_port *port, struct file *file); - int (*tiocmset)(struct usb_serial_port *port, struct file *file, + void (*set_termios)(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); + void (*break_ctl)(struct tty_struct *tty, int break_state); + int (*chars_in_buffer)(struct tty_struct *tty); + void (*throttle)(struct tty_struct *tty); + void (*unthrottle)(struct tty_struct *tty); + int (*tiocmget)(struct tty_struct *tty, struct file *file); + int (*tiocmset)(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); - + /* USB events */ void (*read_int_callback)(struct urb *urb); void (*write_int_callback)(struct urb *urb); void (*read_bulk_callback)(struct urb *urb); @@ -270,19 +274,19 @@ static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} /* Functions needed by other parts of the usbserial core */ extern struct usb_serial *usb_serial_get_by_index(unsigned int minor); extern void usb_serial_put(struct usb_serial *serial); -extern int usb_serial_generic_open(struct usb_serial_port *port, - struct file *filp); -extern int usb_serial_generic_write(struct usb_serial_port *port, - const unsigned char *buf, int count); -extern void usb_serial_generic_close(struct usb_serial_port *port, - struct file *filp); +extern int usb_serial_generic_open(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); +extern int usb_serial_generic_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count); +extern void usb_serial_generic_close(struct tty_struct *tty, + struct usb_serial_port *port, struct file *filp); extern int usb_serial_generic_resume(struct usb_serial *serial); -extern int usb_serial_generic_write_room(struct usb_serial_port *port); -extern int usb_serial_generic_chars_in_buffer(struct usb_serial_port *port); +extern int usb_serial_generic_write_room(struct tty_struct *tty); +extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); extern void usb_serial_generic_read_bulk_callback(struct urb *urb); extern void usb_serial_generic_write_bulk_callback(struct urb *urb); -extern void usb_serial_generic_throttle(struct usb_serial_port *port); -extern void usb_serial_generic_unthrottle(struct usb_serial_port *port); +extern void usb_serial_generic_throttle(struct tty_struct *tty); +extern void usb_serial_generic_unthrottle(struct tty_struct *tty); extern void usb_serial_generic_shutdown(struct usb_serial *serial); extern int usb_serial_generic_register(int debug); extern void usb_serial_generic_deregister(void); diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 3118ede2c67b..0044d9b4cb85 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -22,8 +22,6 @@ * * History: * 0.1 04.01.2000 Created - * - * $Id: usbdevice_fs.h,v 1.1 2000/01/06 18:40:41 tom Exp $ */ /*****************************************************************************/ |