diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/ath9k_platform.h | 2 | ||||
| -rw-r--r-- | include/linux/bcma/bcma.h | 26 | ||||
| -rw-r--r-- | include/linux/bcma/bcma_driver_chipcommon.h | 1 | ||||
| -rw-r--r-- | include/linux/bcma/bcma_driver_pci.h | 2 | ||||
| -rw-r--r-- | include/linux/cordic.h | 48 | ||||
| -rw-r--r-- | include/linux/crc8.h | 101 | ||||
| -rw-r--r-- | include/linux/ieee80211.h | 18 | ||||
| -rw-r--r-- | include/linux/netlink.h | 2 |
8 files changed, 195 insertions, 5 deletions
diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h index 60a7c49dcb49..6e3f54f37844 100644 --- a/include/linux/ath9k_platform.h +++ b/include/linux/ath9k_platform.h @@ -30,6 +30,8 @@ struct ath9k_platform_data { u32 gpio_val; bool is_clk_25mhz; + int (*get_mac_revision)(void); + int (*external_reset)(void); }; #endif /* _LINUX_ATH9K_PLATFORM_H */ diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 08763e4e848f..3895aeb494a3 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -6,6 +6,7 @@ #include <linux/bcma/bcma_driver_chipcommon.h> #include <linux/bcma/bcma_driver_pci.h> +#include <linux/ssb/ssb.h> /* SPROM sharing */ #include "bcma_regs.h" @@ -31,6 +32,12 @@ struct bcma_host_ops { void (*write8)(struct bcma_device *core, u16 offset, u8 value); void (*write16)(struct bcma_device *core, u16 offset, u16 value); void (*write32)(struct bcma_device *core, u16 offset, u32 value); +#ifdef CONFIG_BCMA_BLOCKIO + void (*block_read)(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width); + void (*block_write)(struct bcma_device *core, const void *buffer, + size_t count, u16 offset, u8 reg_width); +#endif /* Agent ops */ u32 (*aread32)(struct bcma_device *core, u16 offset); void (*awrite32)(struct bcma_device *core, u16 offset, u32 value); @@ -117,6 +124,8 @@ struct bcma_device { struct bcma_device_id id; struct device dev; + struct device *dma_dev; + unsigned int irq; bool dev_registered; u8 core_index; @@ -179,6 +188,10 @@ struct bcma_bus { struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; + + /* We decided to share SPROM struct with SSB as long as we do not need + * any hacks for BCMA. This simplifies drivers code. */ + struct ssb_sprom sprom; }; extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) @@ -208,6 +221,18 @@ void bcma_write32(struct bcma_device *core, u16 offset, u32 value) { core->bus->ops->write32(core, offset, value); } +#ifdef CONFIG_BCMA_BLOCKIO +extern inline void bcma_block_read(struct bcma_device *core, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_read(core, buffer, count, offset, reg_width); +} +extern inline void bcma_block_write(struct bcma_device *core, const void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + core->bus->ops->block_write(core, buffer, count, offset, reg_width); +} +#endif extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) { return core->bus->ops->aread32(core, offset); @@ -219,6 +244,7 @@ void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) } extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); extern int bcma_core_enable(struct bcma_device *core, u32 flags); #endif /* LINUX_BCMA_H_ */ diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 083c3b6cd5ce..9c5b69fc985a 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -244,6 +244,7 @@ #define BCMA_CC_REGCTL_DATA 0x065C #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_SPROM 0x0830 /* SPROM beginning */ /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index b7e191cf00ec..3871b668caf9 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -85,5 +85,7 @@ struct bcma_drv_pci { #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) extern void bcma_core_pci_init(struct bcma_drv_pci *pc); +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ diff --git a/include/linux/cordic.h b/include/linux/cordic.h new file mode 100644 index 000000000000..f932093e20c2 --- /dev/null +++ b/include/linux/cordic.h @@ -0,0 +1,48 @@ +/* + * Copyright (c) 2011 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef __CORDIC_H_ +#define __CORDIC_H_ + +#include <linux/types.h> + +/** + * struct cordic_iq - i/q coordinate. + * + * @i: real part of coordinate (in phase). + * @q: imaginary part of coordinate (quadrature). + */ +struct cordic_iq { + s32 i; + s32 q; +}; + +/** + * cordic_calc_iq() - calculates the i/q coordinate for given angle. + * + * @theta: angle in degrees for which i/q coordinate is to be calculated. + * @coord: function output parameter holding the i/q coordinate. + * + * The function calculates the i/q coordinate for a given angle using + * cordic algorithm. The coordinate consists of a real (i) and an + * imaginary (q) part. The real part is essentially the cosine of the + * angle and the imaginary part is the sine of the angle. The returned + * values are scaled by 2^16 for precision. The range for theta is + * for -180 degrees to +180 degrees. Passed values outside this range are + * converted before doing the actual calculation. + */ +struct cordic_iq cordic_calc_iq(s32 theta); + +#endif /* __CORDIC_H_ */ diff --git a/include/linux/crc8.h b/include/linux/crc8.h new file mode 100644 index 000000000000..13c8dabb0441 --- /dev/null +++ b/include/linux/crc8.h @@ -0,0 +1,101 @@ +/* + * Copyright (c) 2011 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef __CRC8_H_ +#define __CRC8_H_ + +#include <linux/types.h> + +/* see usage of this value in crc8() description */ +#define CRC8_INIT_VALUE 0xFF + +/* + * Return value of crc8() indicating valid message+crc. This is true + * if a CRC is inverted before transmission. The CRC computed over the + * whole received bitstream is _table[x], where x is the bit pattern + * of the modification (almost always 0xff). + */ +#define CRC8_GOOD_VALUE(_table) (_table[0xFF]) + +/* required table size for crc8 algorithm */ +#define CRC8_TABLE_SIZE 256 + +/* helper macro assuring right table size is used */ +#define DECLARE_CRC8_TABLE(_table) \ + static u8 _table[CRC8_TABLE_SIZE] + +/** + * crc8_populate_lsb - fill crc table for given polynomial in regular bit order. + * + * @table: table to be filled. + * @polynomial: polynomial for which table is to be filled. + * + * This function fills the provided table according the polynomial provided for + * regular bit order (lsb first). Polynomials in CRC algorithms are typically + * represented as shown below. + * + * poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1 + * + * For lsb first direction x^7 maps to the lsb. So the polynomial is as below. + * + * - lsb first: poly = 10101011(1) = 0xAB + */ +void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial); + +/** + * crc8_populate_msb - fill crc table for given polynomial in reverse bit order. + * + * @table: table to be filled. + * @polynomial: polynomial for which table is to be filled. + * + * This function fills the provided table according the polynomial provided for + * reverse bit order (msb first). Polynomials in CRC algorithms are typically + * represented as shown below. + * + * poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1 + * + * For msb first direction x^7 maps to the msb. So the polynomial is as below. + * + * - msb first: poly = (1)11010101 = 0xD5 + */ +void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial); + +/** + * crc8() - calculate a crc8 over the given input data. + * + * @table: crc table used for calculation. + * @pdata: pointer to data buffer. + * @nbytes: number of bytes in data buffer. + * @crc: previous returned crc8 value. + * + * The CRC8 is calculated using the polynomial given in crc8_populate_msb() + * or crc8_populate_lsb(). + * + * The caller provides the initial value (either %CRC8_INIT_VALUE + * or the previous returned value) to allow for processing of + * discontiguous blocks of data. When generating the CRC the + * caller is responsible for complementing the final return value + * and inserting it into the byte stream. When validating a byte + * stream (including CRC8), a final return value of %CRC8_GOOD_VALUE + * indicates the byte stream data can be considered valid. + * + * Reference: + * "A Painless Guide to CRC Error Detection Algorithms", ver 3, Aug 1993 + * Williams, Ross N., ross<at>ross.net + * (see URL http://www.ross.net/crc/download/crc_v3.txt). + */ +u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes, u8 crc); + +#endif /* __CRC8_H_ */ diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index bf56b6f78270..a26108e4d924 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -117,8 +117,19 @@ #define IEEE80211_MAX_MESH_ID_LEN 32 #define IEEE80211_QOS_CTL_LEN 2 -#define IEEE80211_QOS_CTL_TID_MASK 0x000F -#define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 +/* 1d tag mask */ +#define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 +/* TID mask */ +#define IEEE80211_QOS_CTL_TID_MASK 0x000f +/* EOSP */ +#define IEEE80211_QOS_CTL_EOSP 0x0010 +/* ACK policy */ +#define IEEE80211_QOS_CTL_ACK_POLICY_NORMAL 0x0000 +#define IEEE80211_QOS_CTL_ACK_POLICY_NOACK 0x0020 +#define IEEE80211_QOS_CTL_ACK_POLICY_NO_EXPL 0x0040 +#define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK 0x0060 +/* A-MSDU 802.11n */ +#define IEEE80211_QOS_CTL_A_MSDU_PRESENT 0x0080 /* U-APSD queue for WMM IEs sent by AP */ #define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7) @@ -1423,9 +1434,6 @@ enum ieee80211_sa_query_action { }; -/* A-MSDU 802.11n */ -#define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080 - /* cipher suite selectors */ #define WLAN_CIPHER_SUITE_USE_GROUP 0x000FAC00 #define WLAN_CIPHER_SUITE_WEP40 0x000FAC01 diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 4c4ac3f3ce5a..8d1bcec5cc06 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -48,6 +48,7 @@ struct nlmsghdr { #define NLM_F_MULTI 2 /* Multipart message, terminated by NLMSG_DONE */ #define NLM_F_ACK 4 /* Reply with ack, with zero or error code */ #define NLM_F_ECHO 8 /* Echo this request */ +#define NLM_F_DUMP_INTR 16 /* Dump was inconsistent due to sequence change */ /* Modifiers to GET request */ #define NLM_F_ROOT 0x100 /* specify tree root */ @@ -221,6 +222,7 @@ struct netlink_callback { struct netlink_callback *cb); int (*done)(struct netlink_callback *cb); int family; + unsigned int prev_seq, seq; long args[6]; }; |